diff options
Diffstat (limited to 'Documentation')
481 files changed, 9930 insertions, 3520 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-qaic b/Documentation/ABI/stable/sysfs-driver-qaic new file mode 100644 index 000000000000..c767a93342b3 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-qaic @@ -0,0 +1,19 @@ +What: /sys/bus/pci/drivers/qaic/XXXX:XX:XX.X/accel/accel<minor_nr>/dbc<N>_state +Date: October 2025 +KernelVersion: 6.19 +Contact: Jeff Hugo <jeff.hugo@oss.qualcomm.com> +Description: Represents the current state of DMA Bridge channel (DBC). Below are the possible + states: + + =================== ========================================================== + IDLE (0) DBC is free and can be activated + ASSIGNED (1) DBC is activated and a workload is running on device + BEFORE_SHUTDOWN (2) Sub-system associated with this workload has crashed and + it will shutdown soon + AFTER_SHUTDOWN (3) Sub-system associated with this workload has crashed and + it has shutdown + BEFORE_POWER_UP (4) Sub-system associated with this workload is shutdown and + it will be powered up soon + AFTER_POWER_UP (5) Sub-system associated with this workload is now powered up + =================== ========================================================== +Users: Any userspace application or clients interested in DBC state. diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 6b4e8c7a963d..c80a1b5a03db 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -496,8 +496,17 @@ Description: changed, only freed by writing 0. The kernel makes no guarantees that data is maintained over an address space freeing event, and there is no guarantee that a free followed by an allocate - results in the same address being allocated. + results in the same address being allocated. If extended linear + cache is present, the size indicates extended linear cache size + plus the CXL region size. +What: /sys/bus/cxl/devices/regionZ/extended_linear_cache_size +Date: October, 2025 +KernelVersion: v6.19 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The size of extended linear cache, if there is an extended + linear cache. Otherwise the attribute will not be visible. What: /sys/bus/cxl/devices/regionZ/mode Date: January, 2023 diff --git a/Documentation/ABI/testing/sysfs-class-power-rt9756 b/Documentation/ABI/testing/sysfs-class-power-rt9756 new file mode 100644 index 000000000000..c4d6c2b4715d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-rt9756 @@ -0,0 +1,30 @@ +What: /sys/class/power_supply/rt9756-*/watchdog_timer +Date: Dec 2025 +KernelVersion: 6.19 +Contact: ChiYuan Huang <cy_huang@richtek.com> +Description: + This entry shows and sets the watchdog timer when rt9756 charger + operates in charging mode. When the timer expires, the device + will disable the charging. To prevent the timer expires, any + host communication can make the timer restarted. + + Access: Read, Write + + Valid values: + - 500, 1000, 5000, 30000, 40000, 80000, 128000 or 255000 (milliseconds), + - 0: disabled + +What: /sys/class/power_supply/rt9756-*/operation_mode +Date: Dec 2025 +KernelVersion: 6.19 +Contact: ChiYuan Huang <cy_huang@richtek.com> +Description: + This entry shows and set the operation mode when rt9756 charger + operates in charging phase. If 'bypass' mode is used, internal + path will connect vbus directly to vbat. Else, default 'div2' + mode for the switch-cap charging. + + Access: Read, Write + + Valid values: + - 'bypass' or 'div2' diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-sriov b/Documentation/ABI/testing/sysfs-driver-intel-xe-sriov new file mode 100644 index 000000000000..2fd7e9b7bacc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-sriov @@ -0,0 +1,159 @@ +What: /sys/bus/pci/drivers/xe/.../sriov_admin/ +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + This directory appears for the particular Intel Xe device when: + + - device supports SR-IOV, and + - device is a Physical Function (PF), and + - driver support for the SR-IOV PF is enabled on given device. + + This directory is used as a root for all attributes required to + manage both Physical Function (PF) and Virtual Functions (VFs). + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/ +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + This directory holds attributes related to the SR-IOV Physical + Function (PF). + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf1/ +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf2/ +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf<N>/ +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These directories hold attributes related to the SR-IOV Virtual + Functions (VFs). + + Note that the VF number <N> is 1-based as described in PCI SR-IOV + specification as the Xe driver follows that naming schema. + + There could be "vf1", "vf2" and so on, up to "vf<N>", where <N> + matches the value of the "sriov_totalvfs" attribute. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/profile/exec_quantum_ms +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/profile/preempt_timeout_us +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/profile/sched_priority +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf<n>/profile/exec_quantum_ms +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf<n>/profile/preempt_timeout_us +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf<n>/profile/sched_priority +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These files expose scheduling parameters for the PF and its VFs, and + are visible only on Intel Xe platforms that use time-sliced GPU sharing. + They can be changed even if VFs are enabled and running and reflect the + settings of all tiles/GTs assigned to the given function. + + exec_quantum_ms: (RW) unsigned integer + The GT execution quantum (EQ) in [ms] for the given function. + Actual quantum value might be aligned per HW/FW requirements. + + Default is 0 (unlimited). + + preempt_timeout_us: (RW) unsigned integer + The GT preemption timeout in [us] of the given function. + Actual timeout value might be aligned per HW/FW requirements. + + Default is 0 (unlimited). + + sched_priority: (RW/RO) string + The GT scheduling priority of the given function. + + "low" - function will be scheduled on the GPU for its EQ/PT + only if function has any work already submitted. + + "normal" - functions will be scheduled on the GPU for its EQ/PT + irrespective of whether it has submitted a work or not. + + "high" - function will be scheduled on the GPU for its EQ/PT + in the next time-slice after the current one completes + and function has a work submitted. + + Default is "low". + + When read, this file will display the current and available + scheduling priorities. The currently active priority level will + be enclosed in square brackets, like: + + [low] normal high + + This file can be read-only if changing the priority is not + supported. + + Writes to these attributes may fail with errors like: + -EINVAL if provided input is malformed or not recognized, + -EPERM if change is not applicable on given HW/FW, + -EIO if FW refuses to change the provisioning. + + Reads from these attributes may fail with: + -EUCLEAN if value is not consistent across all tiles/GTs. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/.bulk_profile/exec_quantum_ms +What: /sys/bus/pci/drivers/xe/.../sriov_admin/.bulk_profile/preempt_timeout_us +What: /sys/bus/pci/drivers/xe/.../sriov_admin/.bulk_profile/sched_priority +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These files allows bulk reconfiguration of the scheduling parameters + of the PF or VFs and are available only for Intel Xe platforms with + GPU sharing based on the time-slice basis. These scheduling parameters + can be changed even if VFs are enabled and running. + + exec_quantum_ms: (WO) unsigned integer + The GT execution quantum (EQ) in [ms] to be applied to all functions. + See sriov_admin/{pf,vf<N>}/profile/exec_quantum_ms for more details. + + preempt_timeout_us: (WO) unsigned integer + The GT preemption timeout (PT) in [us] to be applied to all functions. + See sriov_admin/{pf,vf<N>}/profile/preempt_timeout_us for more details. + + sched_priority: (RW/RO) string + The GT scheduling priority to be applied for all functions. + See sriov_admin/{pf,vf<N>}/profile/sched_priority for more details. + + Writes to these attributes may fail with errors like: + -EINVAL if provided input is malformed or not recognized, + -EPERM if change is not applicable on given HW/FW, + -EIO if FW refuses to change the provisioning. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf<n>/stop +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + This file allows to control scheduling of the VF on the Intel Xe GPU + platforms. It allows to implement custom policy mechanism in case VFs + are misbehaving or triggering adverse events above defined thresholds. + + stop: (WO) bool + All GT executions of given function shall be immediately stopped. + To allow scheduling this VF again, the VF FLR must be triggered. + + Writes to this attribute may fail with errors like: + -EINVAL if provided input is malformed or not recognized, + -EPERM if change is not applicable on given HW/FW, + -EIO if FW refuses to change the scheduling. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/device +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf<n>/device +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These are symlinks to the underlying PCI device entry representing + given Xe SR-IOV function. For the PF, this link is always present. + For VFs, this link is present only for currently enabled VFs. diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst index 5df481ac6193..43bc4e3665b4 100644 --- a/Documentation/PCI/pci-error-recovery.rst +++ b/Documentation/PCI/pci-error-recovery.rst @@ -326,6 +326,21 @@ be recovered, there is nothing more that can be done; the platform will typically report a "permanent failure" in such a case. The device will be considered "dead" in this case. +Drivers typically need to call pci_restore_state() after reset to +re-initialize the device's config space registers and thereby +bring it from D0\ :sub:`uninitialized` into D0\ :sub:`active` state +(PCIe r7.0 sec 5.3.1.1). The PCI core invokes pci_save_state() +on enumeration after initializing config space to ensure that a +saved state is available for subsequent error recovery. +Drivers which modify config space on probe may need to invoke +pci_save_state() afterwards to record those changes for later +error recovery. When going into system suspend, pci_save_state() +is called for every PCI device and that state will be restored +not only on resume, but also on any subsequent error recovery. +In the unlikely event that the saved state recorded on suspend +is unsuitable for error recovery, drivers should call +pci_save_state() on resume. + Drivers for multi-function cards will need to coordinate among themselves as to which driver instance will perform any "one-shot" or global device initialization. For example, the Symbios sym53cxx2 diff --git a/Documentation/accel/qaic/aic100.rst b/Documentation/accel/qaic/aic100.rst index 273da6192fb3..41331cf580b1 100644 --- a/Documentation/accel/qaic/aic100.rst +++ b/Documentation/accel/qaic/aic100.rst @@ -487,8 +487,8 @@ one user crashes, the fallout of that should be limited to that workload and not impact other workloads. SSR accomplishes this. If a particular workload crashes, QSM notifies the host via the QAIC_SSR MHI -channel. This notification identifies the workload by it's assigned DBC. A -multi-stage recovery process is then used to cleanup both sides, and get the +channel. This notification identifies the workload by its assigned DBC. A +multi-stage recovery process is then used to cleanup both sides, and gets the DBC/NSPs into a working state. When SSR occurs, any state in the workload is lost. Any inputs that were in @@ -496,6 +496,27 @@ process, or queued by not yet serviced, are lost. The loaded artifacts will remain in on-card DDR, but the host will need to re-activate the workload if it desires to recover the workload. +When SSR occurs for a specific NSP, the assigned DBC goes through the +following state transactions in order: + +DBC_STATE_BEFORE_SHUTDOWN + Indicates that the affected NSP was found in an unrecoverable error + condition. +DBC_STATE_AFTER_SHUTDOWN + Indicates that the NSP is under reset. +DBC_STATE_BEFORE_POWER_UP + Indicates that the NSP's debug information has been collected, and is + ready to be collected by the host (if desired). At that stage the NSP + is restarted by QSM. +DBC_STATE_AFTER_POWER_UP + Indicates that the NSP has been restarted, fully operational and is + in idle state. + +SSR also has an optional crashdump collection feature. If enabled, the host can +collect the memory dump for the crashed NSP and dump it to the user space via +the dev_coredump subsystem. The host can also decline the crashdump collection +request from the device. + Reliability, Accessibility, Serviceability (RAS) ================================================ diff --git a/Documentation/accel/qaic/qaic.rst b/Documentation/accel/qaic/qaic.rst index 018d6cc173d7..ef27e262cb91 100644 --- a/Documentation/accel/qaic/qaic.rst +++ b/Documentation/accel/qaic/qaic.rst @@ -36,7 +36,7 @@ polling mode and reenables the IRQ line. This mitigation in QAIC is very effective. The same lprnet usecase that generates 100k IRQs per second (per /proc/interrupts) is reduced to roughly 64 IRQs over 5 minutes while keeping the host system stable, and having the same -workload throughput performance (within run to run noise variation). +workload throughput performance (within run-to-run noise variation). Single MSI Mode --------------- @@ -49,7 +49,7 @@ useful to be able to fall back to a single MSI when needed. To support this fallback, we allow the case where only one MSI is able to be allocated, and share that one MSI between MHI and the DBCs. The device detects when only one MSI has been configured and directs the interrupts for the DBCs -to the interrupt normally used for MHI. Unfortunately this means that the +to the interrupt normally used for MHI. Unfortunately, this means that the interrupt handlers for every DBC and MHI wake up for every interrupt that arrives; however, the DBC threaded irq handlers only are started when work to be done is detected (MHI will always start its threaded handler). @@ -62,9 +62,9 @@ never disabled, allowing each new entry to the FIFO to trigger a new interrupt. Neural Network Control (NNC) Protocol ===================================== -The implementation of NNC is split between the KMD (QAIC) and UMD. In general +The implementation of NNC is split between the KMD (QAIC) and UMD. In general, QAIC understands how to encode/decode NNC wire protocol, and elements of the -protocol which require kernel space knowledge to process (for example, mapping +protocol which requires kernel space knowledge to process (for example, mapping host memory to device IOVAs). QAIC understands the structure of a message, and all of the transactions. QAIC does not understand commands (the payload of a passthrough transaction). diff --git a/Documentation/admin-guide/media/radio-cardlist.rst b/Documentation/admin-guide/media/radio-cardlist.rst index a82a146bf912..cec724256812 100644 --- a/Documentation/admin-guide/media/radio-cardlist.rst +++ b/Documentation/admin-guide/media/radio-cardlist.rst @@ -30,7 +30,6 @@ radio-terratec TerraTec ActiveRadio ISA Standalone radio-timb Enable the Timberdale radio driver radio-trust Trust FM radio card radio-typhoon Typhoon Radio (a.k.a. EcoRadio) -radio-wl1273 Texas Instruments WL1273 I2C FM Radio fm_drv ISA radio devices fm_drv ISA radio devices radio-zoltrix Zoltrix Radio diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint index 532799501800..8f9dd18dfe04 100644 --- a/Documentation/devicetree/bindings/.yamllint +++ b/Documentation/devicetree/bindings/.yamllint @@ -30,7 +30,7 @@ rules: document-start: present: true empty-lines: - max: 3 + max: 1 max-end: 1 empty-values: forbid-in-block-mappings: true diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 8390d6c00030..8d6f85f4455d 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -32,7 +32,8 @@ find_cmd = $(find_all_cmd) | \ sed 's|^$(srctree)/||' | \ grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \ sed 's|^|$(srctree)/|' -CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, $(shell $(find_cmd))) +CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, \ + $(shell $(find_cmd) | xargs grep -l '^examples:')) quiet_cmd_yamllint = LINT $(src) cmd_yamllint = ($(find_cmd) | \ diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml index a758f4bb2bb3..4683bd1293fa 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml @@ -27,17 +27,17 @@ properties: additionalProperties: false properties: - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 0 patternProperties: - "^osc[0-9]$": + '^osc[0-9]$': type: object - "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$": + '^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$': type: object $ref: '#/$defs/clock-props' unevaluatedProperties: false @@ -58,14 +58,14 @@ properties: minItems: 1 maxItems: 5 - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 0 patternProperties: - "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$": + '^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$': type: object $ref: '#/$defs/clock-props' unevaluatedProperties: false @@ -86,11 +86,11 @@ properties: required: - compatible - clocks - - "#clock-cells" + - '#clock-cells' required: - compatible - - "#clock-cells" + - '#clock-cells' required: - compatible @@ -104,7 +104,7 @@ $defs: reg: maxItems: 1 - "#clock-cells": + '#clock-cells': const: 0 clk-gate: diff --git a/Documentation/devicetree/bindings/arm/amd,seattle.yaml b/Documentation/devicetree/bindings/arm/amd,seattle.yaml new file mode 100644 index 000000000000..7a3fc05b19eb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amd,seattle.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/amd,seattle.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD Seattle SoC Platforms + +maintainers: + - Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> + - Tom Lendacky <thomas.lendacky@amd.com> + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: Boards with AMD Seattle SoC + items: + - const: amd,seattle-overdrive + - const: amd,seattle + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/apm.yaml b/Documentation/devicetree/bindings/arm/apm.yaml new file mode 100644 index 000000000000..ea0d362cea3a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/apm.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/apm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SoC Platforms + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: Boards with X-Gene1 Soc + items: + - const: apm,mustang + - const: apm,xgene-storm + + - description: Boards with X-Gene2 SoC + items: + - const: apm,merlin + - const: apm,xgene-shadowcat + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/lge.yaml b/Documentation/devicetree/bindings/arm/lge.yaml new file mode 100644 index 000000000000..d983ef7fcbd6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lge.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/lge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG Electronics SoC Platforms + +maintainers: + - Chanho Min <chanho.min@lge.com> + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: Boards with LG1312 Soc + items: + - const: lge,lg1312-ref + - const: lge,lg1312 + + - description: Boards with LG1313 SoC + items: + - const: lge,lg1313-ref + - const: lge,lg1313 + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt deleted file mode 100644 index 72de11bd2ef0..000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt +++ /dev/null @@ -1,146 +0,0 @@ -Marvell Armada AP80x System Controller -====================================== - -The AP806/AP807 is one of the two core HW blocks of the Marvell Armada -7K/8K/931x SoCs. It contains system controllers, which provide several -registers giving access to numerous features: clocks, pin-muxing and -many other SoC configuration items. This DT binding allows to describe -these system controllers. - -For the top level node: - - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the AP80x system controller - -SYSTEM CONTROLLER 0 -=================== - -Clocks: -------- - - -The Device Tree node representing the AP806/AP807 system controller -provides a number of clocks: - - - 0: reference clock of CPU cluster 0 - - 1: reference clock of CPU cluster 1 - - 2: fixed PLL at 1200 Mhz - - 3: MSS clock, derived from the fixed PLL - -Required properties: - - - compatible: must be one of: - * "marvell,ap806-clock" - * "marvell,ap807-clock" - - #clock-cells: must be set to 1 - -Pinctrl: --------- - -For common binding part and usage, refer to -Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. - -Required properties: -- compatible must be "marvell,ap806-pinctrl", - -Available mpp pins/groups and functions: -Note: brackets (x) are not part of the mpp name for marvell,function and given -only for more detailed description in this document. - -name pins functions -================================================================================ -mpp0 0 gpio, sdio(clk), spi0(clk) -mpp1 1 gpio, sdio(cmd), spi0(miso) -mpp2 2 gpio, sdio(d0), spi0(mosi) -mpp3 3 gpio, sdio(d1), spi0(cs0n) -mpp4 4 gpio, sdio(d2), i2c0(sda) -mpp5 5 gpio, sdio(d3), i2c0(sdk) -mpp6 6 gpio, sdio(ds) -mpp7 7 gpio, sdio(d4), uart1(rxd) -mpp8 8 gpio, sdio(d5), uart1(txd) -mpp9 9 gpio, sdio(d6), spi0(cs1n) -mpp10 10 gpio, sdio(d7) -mpp11 11 gpio, uart0(txd) -mpp12 12 gpio, sdio(pw_off), sdio(hw_rst) -mpp13 13 gpio -mpp14 14 gpio -mpp15 15 gpio -mpp16 16 gpio -mpp17 17 gpio -mpp18 18 gpio -mpp19 19 gpio, uart0(rxd), sdio(pw_off) - -GPIO: ------ -For common binding part and usage, refer to -Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml. - -Required properties: - -- compatible: "marvell,armada-8k-gpio" - -- offset: offset address inside the syscon block - -Optional properties: - -- marvell,pwm-offset: offset address of PWM duration control registers inside - the syscon block - -Example: -ap_syscon: system-controller@6f4000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x1000>; - - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - - ap_pinctrl: pinctrl { - compatible = "marvell,ap806-pinctrl"; - }; - - ap_gpio: gpio { - compatible = "marvell,armada-8k-gpio"; - offset = <0x1040>; - ngpios = <19>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 19>; - marvell,pwm-offset = <0x10c0>; - #pwm-cells = <2>; - clocks = <&ap_clk 3>; - }; -}; - -SYSTEM CONTROLLER 1 -=================== - -Cluster clocks: ---------------- - -Device Tree Clock bindings for cluster clock of Marvell -AP806/AP807. Each cluster contain up to 2 CPUs running at the same -frequency. - -Required properties: - - compatible: must be one of: - * "marvell,ap806-cpu-clock" - * "marvell,ap807-cpu-clock" -- #clock-cells : should be set to 1. - -- clocks : shall be the input parent clock(s) phandle for the clock - (one per cluster) - -- reg: register range associated with the cluster clocks - -ap_syscon1: system-controller@6f8000 { - compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd"; - reg = <0x6f8000 0x1000>; - - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt deleted file mode 100644 index 54ff9f218328..000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ /dev/null @@ -1,191 +0,0 @@ -Marvell Armada CP110 System Controller -====================================== - -The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K -SoCs. It contains system controllers, which provide several registers -giving access to numerous features: clocks, pin-muxing and many other -SoC configuration items. This DT binding allows to describe these -system controllers. - -For the top level node: - - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the CP110 system controller - -SYSTEM CONTROLLER 0 -=================== - -Clocks: -------- - -The Device Tree node representing this System Controller 0 provides a -number of clocks: - - - a set of core clocks - - a set of gateable clocks - -Those clocks can be referenced by other Device Tree nodes using two -cells: - - The first cell must be 0 or 1. 0 for the core clocks and 1 for the - gateable clocks. - - The second cell identifies the particular core clock or gateable - clocks. - -The following clocks are available: - - Core clocks - - 0 0 APLL - - 0 1 PPv2 core - - 0 2 EIP - - 0 3 Core - - 0 4 NAND core - - 0 5 SDIO core - - Gateable clocks - - 1 0 Audio - - 1 1 Comm Unit - - 1 2 NAND - - 1 3 PPv2 - - 1 4 SDIO - - 1 5 MG Domain - - 1 6 MG Core - - 1 7 XOR1 - - 1 8 XOR0 - - 1 9 GOP DP - - 1 11 PCIe x1 0 - - 1 12 PCIe x1 1 - - 1 13 PCIe x4 - - 1 14 PCIe / XOR - - 1 15 SATA - - 1 16 SATA USB - - 1 17 Main - - 1 18 SD/MMC/GOP - - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) - - 1 22 USB3H0 - - 1 23 USB3H1 - - 1 24 USB3 Device - - 1 25 EIP150 - - 1 26 EIP197 - -Required properties: - - - compatible: must be: - "marvell,cp110-clock" - - #clock-cells: must be set to 2 - -Pinctrl: --------- - -For common binding part and usage, refer to the file -Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. - -Required properties: - -- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl", - "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl" - depending on the specific variant of the SoC being used. - -Available mpp pins/groups and functions: -Note: brackets (x) are not part of the mpp name for marvell,function and given -only for more detailed description in this document. - -name pins functions -================================================================================ -mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio) -mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc) -mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc) -mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio) -mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc) -mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio) -mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse) -mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk) -mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk) -mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk) -mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act) -mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act) -mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk) -mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso) -mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn) -mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp) -mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk) -mpp17 17 gpio, dev(ad5), ge0(txd3) -mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp) -mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp) -mpp20 20 gpio, dev(ad2), ge0(txd0) -mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp) -mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp) -mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp) -mpp24 24 gpio, dev(a0), au(i2slrclk) -mpp25 25 gpio, dev(oen), au(i2sdo_spdifo) -mpp26 26 gpio, dev(wen0), au(i2sbclk) -mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp) -mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data) -mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb) -mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk) -mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc) -mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0 -mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1 -mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2 -mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3 -mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5 -mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp) -mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp) -mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0 -mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1 -mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp) -mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4 -mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp) -mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp) -mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn) -mpp46 46 gpio, ge1(txd1), uart1(rts) -mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc) -mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp) -mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp) -mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11) -mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10) -mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq) -mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led) -mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect) -mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect) -mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk) -mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd) -mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0) -mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1) -mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2) -mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3) -mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc) - -GPIO: ------ - -For common binding part and usage, refer to -Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml. - -Required properties: - -- compatible: "marvell,armada-8k-gpio" - -- offset: offset address inside the syscon block - -Example: - -CP110_LABEL(syscon0): system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x1000>; - - CP110_LABEL(clk): clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - CP110_LABEL(pinctrl): pinctrl { - compatible = "marvell,armada-8k-cpm-pinctrl"; - }; - - CP110_LABEL(gpio1): gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; - }; - -}; diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 7360a2849b5b..6e2e0c551841 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -163,7 +163,6 @@ examples: method = "smc"; }; - - |+ // Case 3: PSCI v0.2 and PSCI v0.1. diff --git a/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml new file mode 100644 index 000000000000..6554e30018b3 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/eswin,eic7700-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Eswin EIC7700 SoC SATA Controller + +maintainers: + - Yulin Lu <luyulin@eswincomputing.com> + - Huan He <hehuan1@eswincomputing.com> + +description: + AHCI SATA controller embedded into the EIC7700 SoC is based on the DWC AHCI + SATA v5.00a IP core. + +select: + properties: + compatible: + const: eswin,eic7700-ahci + required: + - compatible + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + +properties: + compatible: + items: + - const: eswin,eic7700-ahci + - const: snps,dwc-ahci + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: aclk + + resets: + maxItems: 1 + + reset-names: + const: arst + + ports-implemented: + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports-implemented + +unevaluatedProperties: false + +examples: + - | + sata@50420000 { + compatible = "eswin,eic7700-ahci", "snps,dwc-ahci"; + reg = <0x50420000 0x10000>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clock 171>, <&clock 186>; + clock-names = "pclk", "aclk"; + phys = <&sata_phy>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + resets = <&reset 96>; + reset-names = "arst"; + }; diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml index 4c848fcb5a5d..7707cbed2260 100644 --- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml @@ -33,6 +33,10 @@ properties: - description: SPEAr1340 AHCI SATA device const: snps,spear-ahci + iommus: + minItems: 1 + maxItems: 3 + patternProperties: "^sata-port@[0-9a-e]$": $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index 24c939f59091..cd5c2a532a92 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -43,7 +43,7 @@ properties: maximum: 20000000 patternProperties: - "^.*@[0-9a-fA-F]+$": + "@[0-9a-f]+$": type: object additionalProperties: true properties: diff --git a/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml new file mode 100644 index 000000000000..d340899ca5f1 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/cznic,moxtet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Turris Moxtet SPI bus + +maintainers: + - Marek Behún <kabel@kernel.org> + +description: > + Turris Mox module status and configuration bus (over SPI) + + The driver finds the devices connected to the bus by itself, but it may be + needed to reference some of them from other parts of the device tree. In that + case the devices can be defined as subnodes of the moxtet node. + +properties: + compatible: + const: cznic,moxtet + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + spi-cpol: true + + spi-cpha: true + + spi-max-frequency: true + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - spi-cpol + - spi-cpha + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + + required: + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + moxtet@1 { + compatible = "cznic,moxtet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml index 4adbb7afa889..6645352c7f6b 100644 --- a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml +++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml @@ -70,7 +70,7 @@ properties: - const: ahb patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": description: Devices attached to the bus type: object diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt deleted file mode 100644 index fb50fc865336..000000000000 --- a/Documentation/devicetree/bindings/bus/moxtet.txt +++ /dev/null @@ -1,46 +0,0 @@ -Turris Mox module status and configuration bus (over SPI) - -Required properties: - - compatible : Should be "cznic,moxtet" - - #address-cells : Has to be 1 - - #size-cells : Has to be 0 - - spi-cpol : Required inverted clock polarity - - spi-cpha : Required shifted clock phase - - interrupts : Must contain reference to the shared interrupt line - - interrupt-controller : Required - - #interrupt-cells : Has to be 1 - -For other required and optional properties of SPI slave nodes please refer to -../spi/spi-bus.txt. - -Required properties of subnodes: - - reg : Should be position on the Moxtet bus (how many Moxtet - modules are between this module and CPU module, so - either 0 or a positive integer) - -The driver finds the devices connected to the bus by itself, but it may be -needed to reference some of them from other parts of the device tree. In that -case the devices can be defined as subnodes of the moxtet node. - -Example: - - moxtet@1 { - compatible = "cznic,moxtet"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - spi-max-frequency = <10000000>; - spi-cpol; - spi-cpha; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gpiosb>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - - moxtet_sfp: gpio@0 { - compatible = "cznic,moxtet-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0>; - } - }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml index d12b62a3a5a8..bf0af3424c9a 100644 --- a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml +++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml @@ -44,7 +44,7 @@ properties: Contains the firewall ID associated to the peripheral. patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": description: Peripherals type: object diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml index 20acd1a6b173..9eb0b48b4f51 100644 --- a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml +++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml @@ -60,7 +60,7 @@ properties: Contains the firewall ID associated to the peripheral. patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": description: Peripherals type: object diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml index c4714d0fbe07..e588a7e8f260 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -132,7 +132,6 @@ examples: "ahb_mp", "ahb_mali400"; }; - - | clk@1c20068 { #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml new file mode 100644 index 000000000000..43b0631ba167 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,ap80x-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada AP80x System Controller Clocks + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + - Miquel Raynal <miquel.raynal@bootlin.com> + +description: > + The AP806/AP807 is one of the two core HW blocks of the Marvell Armada + 7K/8K/931x SoCs. It contains system controllers, which provide several + registers giving access to numerous features: clocks, pin-muxing and many + other SoC configuration items. + +properties: + compatible: + enum: + - marvell,ap806-clock + - marvell,ap806-cpu-clock + - marvell,ap807-clock + - marvell,ap807-cpu-clock + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + items: + - description: cluster 0 parent clock phandle + - description: cluster 1 parent clock phandle + +required: + - compatible + - "#clock-cells" + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - marvell,ap806-cpu-clock + - marvell,ap807-cpu-clock + then: + required: + - clocks diff --git a/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml new file mode 100644 index 000000000000..ad0bc79b24c6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,cp110-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada CP110 System Controller Clocks + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + - Miquel Raynal <miquel.raynal@bootlin.com> + +description: > + The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K/931x + SoCs. It contains system controllers, which provide several registers giving + access to numerous features: clocks, pin-muxing and many other SoC + configuration items. + +properties: + compatible: + const: marvell,cp110-clock + + "#clock-cells": + const: 2 + description: > + The first cell must be 0 or 1. 0 for the core clocks and 1 for the + gateable clocks. The second cell identifies the particular core clock or + gateable clocks. + + The following clocks are available: + + - Core clocks + - 0 0 APLL + - 0 1 PPv2 core + - 0 2 EIP + - 0 3 Core + - 0 4 NAND core + - 0 5 SDIO core + + - Gateable clocks + - 1 0 Audio + - 1 1 Comm Unit + - 1 2 NAND + - 1 3 PPv2 + - 1 4 SDIO + - 1 5 MG Domain + - 1 6 MG Core + - 1 7 XOR1 + - 1 8 XOR0 + - 1 9 GOP DP + - 1 11 PCIe x1 0 + - 1 12 PCIe x1 1 + - 1 13 PCIe x4 + - 1 14 PCIe / XOR + - 1 15 SATA + - 1 16 SATA USB + - 1 17 Main + - 1 18 SD/MMC/GOP + - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) + - 1 22 USB3H0 + - 1 23 USB3H1 + - 1 24 USB3 Device + - 1 25 EIP150 + - 1 26 EIP197 + +required: + - compatible + - "#clock-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml index a9ba21144a56..13bb616249a1 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -37,7 +37,7 @@ properties: '#clock-cells': const: 1 - "#reset-cells": + '#reset-cells': const: 1 nvidia,external-memory-controller: @@ -46,7 +46,7 @@ properties: phandle of the external memory controller node patternProperties: - "^emc-timings-[0-9]+$": + '^emc-timings-[0-9]+$': type: object properties: nvidia,ram-code: @@ -56,7 +56,7 @@ patternProperties: this timing set is used for patternProperties: - "^timing-[0-9]+$": + '^timing-[0-9]+$': type: object properties: clock-frequency: @@ -94,7 +94,7 @@ required: - compatible - reg - '#clock-cells' - - "#reset-cells" + - '#reset-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml index bee2dd4b29bf..73cccc0df424 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -39,11 +39,11 @@ properties: '#clock-cells': const: 1 - "#reset-cells": + '#reset-cells': const: 1 patternProperties: - "^(sclk)|(pll-[cem])$": + '^(sclk)|(pll-[cem])$': type: object properties: compatible: @@ -76,7 +76,7 @@ required: - compatible - reg - '#clock-cells' - - "#reset-cells" + - '#reset-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml index 90cd3feab5fa..ab97d4b7dba8 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml @@ -8,7 +8,7 @@ title: Qualcomm RPM Clock Controller maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml index bc2fd3761328..655154534c0f 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml @@ -99,7 +99,6 @@ properties: the datasheet. const: 1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml index b44a76a958f4..b497c28e8094 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml @@ -22,7 +22,6 @@ properties: - xlnx,clocking-wizard-v6.0 - xlnx,versal-clk-wizard - reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml index 98e8240a05bd..995b3ef408b7 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -121,5 +121,4 @@ examples: }; }; - ... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml index 895506d93f4c..85a6086cc10e 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml @@ -121,5 +121,4 @@ examples: }; }; - ... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 60fd927b5a06..c43b02ec884f 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -142,7 +142,6 @@ then: reset-names: minItems: 2 - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index cb0a90f02321..3ae45db85ea7 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -25,7 +25,6 @@ description: | M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| - VIU: Video Input Unit --------------------- diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index 6d11f5955b51..c1cefd547391 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -56,22 +56,12 @@ properties: - const: cec interrupts: - items: - - description: CEC TX interrupt - - description: CEC RX interrupt - - description: CEC stuck at low interrupt - - description: Wake-up interrupt - - description: Hotplug connected interrupt - - description: Hotplug removed interrupt + minItems: 5 + maxItems: 6 interrupt-names: - items: - - const: cec-tx - - const: cec-rx - - const: cec-low - - const: wakeup - - const: hpd-connected - - const: hpd-removed + minItems: 5 + maxItems: 6 ddc: $ref: /schemas/types.yaml#/definitions/phandle @@ -112,6 +102,61 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm2711-hdmi0 + - brcm,bcm2711-hdmi1 + then: + properties: + interrupts: + items: + - description: CEC TX interrupt + - description: CEC RX interrupt + - description: CEC stuck at low interrupt + - description: Wake-up interrupt + - description: Hotplug connected interrupt + - description: Hotplug removed interrupt + interrupt-names: + items: + - const: cec-tx + - const: cec-rx + - const: cec-low + - const: wakeup + - const: hpd-connected + - const: hpd-removed + + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm2712-hdmi0 + - brcm,bcm2712-hdmi1 + then: + properties: + interrupts: + items: + - description: CEC TX interrupt + - description: CEC RX interrupt + - description: CEC stuck at low interrupt + - description: Hotplug connected interrupt + - description: Hotplug removed interrupt + interrupts-names: + items: + - const: cec-tx + - const: cec-rx + - const: cec-low + - const: hpd-connected + - const: hpd-removed + + required: + - interrupts + - interrupt-names + examples: - | hdmi0: hdmi@7ef00700 { @@ -136,6 +181,9 @@ examples: "hd"; clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup", + "hpd-connected", "hpd-removed"; resets = <&dvp 0>; ddc = <&ddc0>; }; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml index f91c9dce2a44..9aca38a58a16 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -20,11 +20,20 @@ properties: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 3 clocks: - maxItems: 1 - description: Core Clock + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 required: - compatible @@ -33,17 +42,68 @@ required: additionalProperties: false -if: - properties: - compatible: - contains: - enum: - - brcm,bcm2711-hvs - - brcm,bcm2712-hvs - -then: - required: - - clocks +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm2711-hvs + + then: + properties: + clocks: + items: + - description: Core Clock + interrupts: + maxItems: 1 + clock-names: false + interrupt-names: false + + required: + - clocks + + - if: + properties: + compatible: + contains: + const: brcm,bcm2712-hvs + + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: core + - const: disp + interrupts: + items: + - description: Channel 0 End of frame + - description: Channel 1 End of frame + - description: Channel 2 End of frame + interrupt-names: + items: + - const: ch0-eof + - const: ch1-eof + - const: ch2-eof + required: + - clocks + - clock-names + - interrupt-names + + - if: + properties: + compatible: + contains: + const: brcm,bcm2835-hvs + + then: + properties: + interrupts: + maxItems: 1 + clock-names: false + interrupt-names: false examples: - | diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml index 5bbe81862c8f..d29a0d06187e 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -156,7 +156,6 @@ else: adi,input-style: false adi,input-justification: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml index 05442d437755..6211ab8bbb0e 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml @@ -49,6 +49,10 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: HDMI output port + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel audio input port + required: - port@0 - port@1 @@ -98,5 +102,13 @@ examples: remote-endpoint = <&hdmi0_con>; }; }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&pai_to_hdmi_tx>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index ba644c30dcf4..17d1f97ce8c2 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - ite,it66121 + - ite,it66122 - ite,it6610 reg: diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 0487bbffd7f7..4f7d3e9cf0c2 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -131,7 +131,6 @@ required: additionalProperties: false - examples: - | lvds-encoder { diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml index e6397ac2048b..235018a81e85 100644 --- a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml +++ b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Parade PS8622/PS8625 DisplayPort to LVDS Converter maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml index c167795c63f6..b95f10edd3a2 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -14,6 +14,9 @@ description: | R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up to four data lanes. +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + properties: compatible: enum: @@ -80,14 +83,14 @@ required: - resets - ports -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> #include <dt-bindings/power/r8a779a0-sysc.h> - dsi0: dsi-encoder@fed80000 { + dsi@fed80000 { compatible = "renesas,r8a779a0-dsi-csi2-tx"; reg = <0xfed80000 0x10000>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -117,4 +120,51 @@ examples: }; }; }; + + - | + #include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + #include <dt-bindings/power/r8a779g0-sysc.h> + + dsi@fed80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,r8a779g0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>, + <&cpg CPG_CORE R8A779G0_CLK_DSIREF>; + clock-names = "fck", "dsi", "pll"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + dsi0port1_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <1 2>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c"; + power-supply = <&vcc_lcd_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0port1_out>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml index 6d1a36b76fcb..a5fe46de3535 100644 --- a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Silicon Image SiI8620 HDMI/MHL bridge maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 9ef587d46506..20c7e0a77802 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -27,7 +27,9 @@ properties: - const: adi,adv7123 - enum: - adi,adv7123 + - asl-tek,cs5263 - dumb-vga-dac + - parade,ps185hdm - radxa,ra620 - realtek,rtd2171 - ti,opa362 diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index b78f64c9c5f4..70f229dc4e0c 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -123,7 +123,6 @@ properties: - required: - port@1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml index 9cc1fd0751cd..7d78edc403dc 100644 --- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -54,7 +54,6 @@ examples: #address-cells = <1>; #size-cells = <0>; - display@0{ compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486"; reg = <0>; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml new file mode 100644 index 000000000000..4f99682a308d --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Audio Interface + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: + The HDMI TX Parallel Audio Interface (HTX_PAI) is a bridge between the + Audio Subsystem to the HDMI TX Controller. + +properties: + compatible: + const: fsl,imx8mp-hdmi-pai + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: apb + + power-domains: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + audio-bridge@32fc4800 { + compatible = "fsl,imx8mp-hdmi-pai"; + reg = <0x32fc4800 0x800>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <14>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>; + clock-names = "apb"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>; + + port { + pai_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pai>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index aeb4e4f36044..ebda78db87a6 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -18,6 +18,7 @@ properties: compatible: oneOf: - enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,sc7180-dp - qcom,sc7280-dp @@ -33,6 +34,11 @@ properties: - items: - enum: + - qcom,qcs8300-dp + - const: qcom,sa8775p-dp + + - items: + - enum: - qcom,sm6350-dp - const: qcom,sc7180-dp @@ -55,6 +61,12 @@ properties: - items: - enum: + - qcom,sm6150-dp + - const: qcom,sm8150-dp + - const: qcom,sm8350-dp + + - items: + - enum: - qcom,sm8750-dp - const: qcom,sm8650-dp @@ -195,9 +207,11 @@ allOf: compatible: contains: enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,x1e80100-dp then: + $ref: /schemas/sound/dai-common.yaml# oneOf: - required: - aux-bus @@ -239,6 +253,7 @@ allOf: enum: # these platforms support 2 streams MST on some interfaces, # others are SST only + - qcom,glymur-dp - qcom,sc8280xp-dp - qcom,x1e80100-dp then: @@ -295,7 +310,7 @@ allOf: minItems: 6 maxItems: 8 -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index afc187935744..e32056ae0f5d 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -21,7 +21,7 @@ properties: compatible: oneOf: - items: - - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$' + - pattern: '^qcom,adreno-gmu-[6-8][0-9][0-9]\.[0-9]$' - const: qcom,adreno-gmu - items: - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$' @@ -303,6 +303,64 @@ allOf: properties: compatible: contains: + const: qcom,adreno-gmu-840.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-x285.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + - description: GMU RSCC HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + - const: rscc + + - if: + properties: + compatible: + contains: const: qcom,adreno-gmu-wrapper then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 3696b083e353..826aafdcc20b 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -133,7 +133,6 @@ properties: For GMU attached devices a phandle to the GMU device that will control the power for the GPU. - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml new file mode 100644 index 000000000000..2329ed96e6cb --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml @@ -0,0 +1,264 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,glymur-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Glymur Display MDSS + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + Glymur MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces, etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,glymur-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interconnect/qcom,glymur-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy-qcom-qmp.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,glymur-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + resets = <&disp_cc_mdss_core_bcr>; + + power-domains = <&mdss_gdsc>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,glymur-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + displayport-controller@ae90000 { + compatible = "qcom,glymur-dp"; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0x600>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_dptx0_aux_clk>, + <&dispcc_dptx0_link_clk>, + <&dispcc_dptx0_link_intf_clk>, + <&dispcc_dptx0_pixel0_clk>, + <&dispcc_dptx0_pixel1_clk>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>, + <&dispcc_mdss_dptx0_pixel0_clk_src>, + <&dispcc_mdss_dptx0_pixel1_clk_src>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml new file mode 100644 index 000000000000..e96baaae9ba9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcs8300-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCS8300 Display MDSS + +maintainers: + - Yongxing Mou <yongxing.mou@oss.qualcomm.com> + +description: + QCS8300 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces and EDP etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,qcs8300-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,qcs8300-edp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,qcs8300-gcc.h> + #include <dt-bindings/clock/qcom,sa8775p-dispcc.h> + #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss: display-subsystem@ae00000 { + compatible = "qcom,qcs8300-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + resets = <&dispcc_core_bcr>; + power-domains = <&dispcc_gdsc>; + + clocks = <&dispcc_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc_mdp_clk>; + + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss_dp0_phy: phy@aec2a00 { + compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy"; + + reg = <0x0aec2a00 0x200>, + <0x0aec2200 0xd0>, + <0x0aec2600 0xd0>, + <0x0aec2000 0x1c8>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l4a>; + }; + + displayport-controller@af54000 { + compatible = "qcom,qcs8300-dp", "qcom,sa8775p-dp"; + + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + reg = <0xaf54000 0x104>, + <0xaf54200 0x0c0>, + <0xaf55000 0x770>, + <0xaf56000 0x09c>, + <0xaf57000 0x09c>, + <0xaf58000 0x09c>, + <0xaf59000 0x09c>, + <0xaf5a000 0x23c>, + <0xaf5b000 0x23c>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel", + "stream_2_pixel", + "stream_3_pixel"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>; + assigned-clock-parents = <&mdss_dp0_phy 0>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>; + phys = <&mdss_dp0_phy>; + phy-names = "dp"; + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml index 9ac24f99d3ad..46e9335f849f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml @@ -51,6 +51,14 @@ patternProperties: compatible: const: qcom,sm6150-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,sm6150-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true @@ -130,35 +138,37 @@ examples: #size-cells = <0>; port@0 { - reg = <0>; - dpu_intf0_out: endpoint { - }; + reg = <0>; + + dpu_intf0_out: endpoint { + }; }; port@1 { - reg = <1>; - dpu_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; }; }; mdp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_low_svs>; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; }; - opp-25600000 { - opp-hz = /bits/ 64 <25600000>; - required-opps = <&rpmhpd_opp_svs>; + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; }; opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - required-opps = <&rpmhpd_opp_nom>; + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml index 0a46120dd868..fe296e3186d0 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -13,11 +13,17 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - enum: - - qcom,sa8775p-dpu - - qcom,sm8650-dpu - - qcom,sm8750-dpu - - qcom,x1e80100-dpu + oneOf: + - enum: + - qcom,glymur-dpu + - qcom,sa8775p-dpu + - qcom,sm8650-dpu + - qcom,sm8750-dpu + - qcom,x1e80100-dpu + - items: + - enum: + - qcom,qcs8300-dpu + - const: qcom,sa8775p-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml index 4151f475f3bc..d55fda9a523e 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8750 Display MDSS maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml new file mode 100644 index 000000000000..02f7fb1f16dc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,il79900a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek IL79900a based MIPI-DSI panels + +maintainers: + - Langyan Ye <yelangyan@huaqin.corp-partner.google.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - tianma,tl121bvms07-00 + - const: ilitek,il79900a + + reg: + maxItems: 1 + description: DSI virtual channel used by the panel + + enable-gpios: + maxItems: 1 + description: GPIO specifier for the enable pin + + avdd-supply: + description: Positive analog voltage supply (AVDD) + + avee-supply: + description: Negative analog voltage supply (AVEE) + + pp1800-supply: + description: 1.8V logic voltage supply + + backlight: true + +required: + - compatible + - reg + - enable-gpios + - avdd-supply + - avee-supply + - pp1800-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,tl121bvms07-00", "ilitek,il79900a"; + reg = <0>; + enable-gpios = <&pio 25 0>; + avdd-supply = <®_avdd>; + avee-supply = <®_avee>; + pp1800-supply = <®_pp1800>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index 434cc6af9c95..d979701a00a8 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -20,9 +20,11 @@ properties: - bananapi,lhr050h41 - bestar,bsd1218-a101kl68 - feixin,k101-im2byl02 + - raspberrypi,dsi-5inch - raspberrypi,dsi-7inch - startek,kd050hdfia020 - tdo,tl050hdv35 + - wanchanglong,w552946aaa - wanchanglong,w552946aba - const: ilitek,ili9881c @@ -30,6 +32,7 @@ properties: maxItems: 1 backlight: true + port: true power-supply: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml new file mode 100644 index 000000000000..0f0b9079f199 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lg,ld070wx3-sl01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG Corporation 7" WXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: lg,ld070wx3-sl01 + + reg: + maxItems: 1 + + vdd-supply: true + vcc-supply: true + + backlight: true + port: true + +required: + - compatible + - vdd-supply + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + vdd-supply = <&vdd_3v3_lcd>; + vcc-supply = <&vcc_1v8_lcd>; + + backlight = <&backlight>; + + port { + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 4388d5375851..dbc01e640895 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -59,6 +59,8 @@ properties: # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel - jenson,bl-jt60050-01a - tbs,a711-panel + # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel + - winstar,wf70a8syjhlnga - const: panel-lvds diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 9b92a05791cc..8d668979b62d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -19,6 +19,9 @@ description: | If the panel is more advanced a dedicated binding file is required. +allOf: + - $ref: panel-common.yaml# + properties: compatible: @@ -42,8 +45,6 @@ properties: - kingdisplay,kd097d04 # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel - lg,acx467akm-7 - # LG Corporation 7" WXGA TFT LCD panel - - lg,ld070wx3-sl01 # LG Corporation 5" HD TFT LCD panel - lg,lh500wx1-sd03 # Lincoln LCD197 5" 1080x1920 LCD panel @@ -56,10 +57,6 @@ properties: - panasonic,vvx10f034n00 # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel - samsung,s6e3fa7-ams559nk06 - # Samsung s6e3fc2x01 1080x2340 AMOLED panel - - samsung,s6e3fc2x01 - # Samsung sofef00 1080x2280 AMOLED panel - - samsung,sofef00 # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel - tdo,tl070wsh30 @@ -72,31 +69,12 @@ properties: reset-gpios: true port: true power-supply: true - vddio-supply: true - -allOf: - - $ref: panel-common.yaml# - - if: - properties: - compatible: - enum: - - samsung,s6e3fc2x01 - - samsung,sofef00 - then: - properties: - power-supply: false - required: - - vddio-supply - else: - properties: - vddio-supply: false - required: - - power-supply additionalProperties: false required: - compatible + - power-supply - reg examples: diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 2017428d8828..24e277b19094 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -184,6 +184,8 @@ properties: - innolux,n156bge-l21 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p + # JuTouch Technology Co.. 10" JT101TM023 WXGA (1280 x 800) LVDS panel + - jutouch,jt101tm023 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel @@ -268,6 +270,8 @@ properties: - qiaodian,qd43003c0-40 # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel - qishenglong,gopher2b-lcd + # Raystar Optronics, Inc. RFF500F-AWH-DNN 5.0" TFT 840x480 + - raystar,rff500f-awh-dnn # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 - rocktech,rk101ii01d-ct # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel @@ -276,6 +280,8 @@ properties: - rocktech,rk043fn48h # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel - samsung,ltl101al01 + # Samsung Electronics 10.6" FWXGA (1366x768) TFT LCD panel + - samsung,ltl106al01 # Samsung Electronics 10.1" WSVGA TFT LCD panel - samsung,ltn101nt05 # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index aea69b84ca5d..8c9774458777 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -41,7 +41,6 @@ description: | | | | v | | +-------+----------+-------------------------------------+----------+ - The following is the panel timings shown with time on the x-axis. This matches the timing diagrams often found in data sheets. diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 04f86e0cbac9..694037301583 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -9,6 +9,9 @@ title: Ronbo RB070D30 DSI Display Panel maintainers: - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: panel-common.yaml# + properties: compatible: const: ronbo,rb070d30 @@ -20,10 +23,6 @@ properties: description: GPIO used for the power pin maxItems: 1 - reset-gpios: - description: GPIO used for the reset pin - maxItems: 1 - shlr-gpios: description: GPIO used for the shlr pin (horizontal flip) maxItems: 1 @@ -35,10 +34,6 @@ properties: vcc-lcd-supply: description: Power regulator - backlight: - description: Backlight used by the panel - $ref: /schemas/types.yaml#/definitions/phandle - required: - compatible - power-gpios @@ -47,5 +42,6 @@ required: - shlr-gpios - updn-gpios - vcc-lcd-supply + - port -additionalProperties: false +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml index ccb574caed28..f1723e910252 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml @@ -33,6 +33,8 @@ properties: - samsung,atna45dc02 # Samsung 15.6" 3K (2880x1620 pixels) eDP AMOLED panel - samsung,atna56ac03 + # Samsung 16.0" 3K (2880x1800 pixels) eDP AMOLED panel + - samsung,atna60cl08 - const: samsung,atna33xc20 enable-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml new file mode 100644 index 000000000000..d48354fb52ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e3fc2x01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E3FC2X01 AMOLED DDIC + +description: The S6E3FC2X01 is display driver IC with connected panel. + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.41 inch, 1080x2340 pixels, 19.5:9 ratio + - samsung,s6e3fc2x01-ams641rw + - const: samsung,s6e3fc2x01 + + reg: + maxItems: 1 + + reset-gpios: true + + port: true + + vddio-supply: + description: VDD regulator + + vci-supply: + description: VCI regulator + + poc-supply: + description: POC regulator + +required: + - compatible + - reset-gpios + - vddio-supply + - vci-supply + - poc-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml new file mode 100644 index 000000000000..eeee3cac72e3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,sofef00.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SOFEF00 AMOLED DDIC + +description: The SOFEF00 is display driver IC with connected panel. + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.01 inch, 1080x2160 pixels, 18:9 ratio + - samsung,sofef00-ams601nt22 + # Samsung 6.28 inch, 1080x2280 pixels, 19:9 ratio + - samsung,sofef00-ams628nw01 + - const: samsung,sofef00 + + reg: + maxItems: 1 + + poc-supply: + description: POC regulator + + vci-supply: + description: VCI regulator + + vddio-supply: + description: VDD regulator + +required: + - compatible + - reset-gpios + - poc-supply + - vci-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,sofef00-ams628nw01", "samsung,sofef00"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&panel_active>; + pinctrl-1 = <&panel_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml new file mode 100644 index 000000000000..08a35ebbbb3c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +description: > + This panel requires a dual-channel DSI host to operate and it supports + only left-right split mode, where each channel drives the left or right + half of the screen and only video mode. + + Each of the DSI channels controls a separate DSI peripheral. + The peripheral driven by the first link (DSI-LINK1), left one, is + considered the primary peripheral and controls the device. + +allOf: + - $ref: panel-common-dual.yaml# + +properties: + compatible: + const: sharp,lq079l1sx01 + + reg: + maxItems: 1 + + avdd-supply: + description: regulator that supplies the analog voltage + + vddio-supply: + description: regulator that supplies the I/O voltage + + vsp-supply: + description: positive boost supply regulator + + vsn-supply: + description: negative boost supply regulator + + reset-gpios: + maxItems: 1 + + backlight: true + ports: true + +required: + - compatible + - reg + - avdd-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,lq079l1sx01"; + reg = <0>; + + reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>; + + avdd-supply = <&avdd_lcd>; + vddio-supply = <&vdd_lcd_io>; + vsp-supply = <&vsp_5v5_lcd>; + vsn-supply = <&vsn_5v5_lcd>; + + backlight = <&backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml new file mode 100644 index 000000000000..152d94367130 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/synaptics,td4300-panel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics TDDI Display Panel Controller + +maintainers: + - Kaustabh Chakraborty <kauschluss@disroot.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - syna,td4101-panel + - syna,td4300-panel + + reg: + maxItems: 1 + + vio-supply: + description: core I/O voltage supply + + vsn-supply: + description: negative voltage supply for analog circuits + + vsp-supply: + description: positive voltage supply for analog circuits + + backlight-gpios: + maxItems: 1 + description: backlight enable GPIO + + reset-gpios: true + width-mm: true + height-mm: true + panel-timing: true + +required: + - compatible + - reg + - width-mm + - height-mm + - panel-timing + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "syna,td4300-panel"; + reg = <0>; + + vio-supply = <&panel_vio_reg>; + vsn-supply = <&panel_vsn_reg>; + vsp-supply = <&panel_vsp_reg>; + + backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpd3 4 GPIO_ACTIVE_LOW>; + + width-mm = <68>; + height-mm = <121>; + + panel-timing { + clock-frequency = <144389520>; + + hactive = <1080>; + hsync-len = <4>; + hfront-porch = <120>; + hback-porch = <32>; + + vactive = <1920>; + vsync-len = <2>; + vfront-porch = <21>; + vback-porch = <4>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml index 59a373728e62..99db268eb9b3 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -38,7 +38,6 @@ description: |+ The serial protocol has line names that resemble I2C but the protocol is not I2C but 3WIRE SPI. - allOf: - $ref: panel-common.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml index 1e32d14b6edb..2cc66dcef870 100644 --- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml @@ -25,6 +25,9 @@ properties: - enum: - renesas,r9a07g054-du # RZ/V2L - const: renesas,r9a07g044-du # RZ/G2L fallback + - items: + - const: renesas,r9a09g056-du # RZ/V2N + - const: renesas,r9a09g057-du # RZ/V2H(P) fallback reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml index a8a008717997..6345f0132d43 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml @@ -125,7 +125,6 @@ examples: power-domains = <&power RK3588_PD_VO0>; #sound-dai-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml index c59df3c1a3f7..632b48bfabb9 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml @@ -17,6 +17,7 @@ properties: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi - rockchip,rk3288-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3399-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi @@ -73,6 +74,7 @@ allOf: enum: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml index 96b4b088eebe..d649808c59da 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml @@ -113,6 +113,14 @@ properties: description: Additional HDMI QP related data is accessed through VO GRF regs. + frl-enable-gpios: + description: + Optional GPIO line to be asserted when operating in HDMI 2.1 FRL mode and + deasserted for HDMI 1.4/2.0 TMDS. It can be used to control external + voltage bias for HDMI data lines. When not present the HDMI encoder will + operate in TMDS mode only. + maxItems: 1 + required: - compatible - reg @@ -132,8 +140,10 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/power/rk3588-power.h> #include <dt-bindings/reset/rockchip,rk3588-cru.h> @@ -164,6 +174,7 @@ examples: rockchip,grf = <&sys_grf>; rockchip,vo-grf = <&vo1_grf>; #sound-dai-cells = <0>; + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index 296500f9da05..45ffdebc9d86 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -181,7 +181,6 @@ allOf: required: - amlogic,pipeline - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml b/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml new file mode 100644 index 000000000000..9ca5f7848785 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/apm,xgene-storm-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene Storm SoC DMA + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +properties: + compatible: + const: apm,xgene-storm-dma + + reg: + items: + - description: DMA control and status registers + - description: Descriptor ring control and status registers + - description: Descriptor ring command registers + - description: SoC efuse registers + + interrupts: + items: + - description: DMA error reporting interrupt + - description: DMA channel 0 completion interrupt + - description: DMA channel 1 completion interrupt + - description: DMA channel 2 completion interrupt + - description: DMA channel 3 completion interrupt + + clocks: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + dma@1f270000 { + compatible = "apm,xgene-storm-dma"; + reg = <0x1f270000 0x10000>, + <0x1f200000 0x10000>, + <0x1b000000 0x400000>, + <0x1054a000 0x100>; + interrupts = <0x0 0x82 0x4>, + <0x0 0xb8 0x4>, + <0x0 0xb9 0x4>, + <0x0 0xba 0x4>, + <0x0 0xbb 0x4>; + dma-coherent; + clocks = <&dmaclk 0>; + }; diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt deleted file mode 100644 index c53e0b08032f..000000000000 --- a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt +++ /dev/null @@ -1,47 +0,0 @@ -Applied Micro X-Gene SoC DMA nodes - -DMA nodes are defined to describe on-chip DMA interfaces in -APM X-Gene SoC. - -Required properties for DMA interfaces: -- compatible: Should be "apm,xgene-dma". -- device_type: set to "dma". -- reg: Address and length of the register set for the device. - It contains the information of registers in the following order: - 1st - DMA control and status register address space. - 2nd - Descriptor ring control and status register address space. - 3rd - Descriptor ring command register address space. - 4th - Soc efuse register address space. -- interrupts: DMA has 5 interrupts sources. 1st interrupt is - DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts - are completion interrupts for each DMA channels. -- clocks: Reference to the clock entry. - -Optional properties: -- dma-coherent : Present if dma operations are coherent - -Example: - dmaclk: dmaclk@1f27c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f27c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "dmaclk"; - }; - - dma: dma@1f270000 { - compatible = "apm,xgene-storm-dma"; - device_type = "dma"; - reg = <0x0 0x1f270000 0x0 0x10000>, - <0x0 0x1f200000 0x0 0x10000>, - <0x0 0x1b000000 0x0 0x400000>, - <0x0 0x1054a000 0x0 0x100>; - interrupts = <0x0 0x82 0x4>, - <0x0 0xb8 0x4>, - <0x0 0xb9 0x4>, - <0x0 0xba 0x4>, - <0x0 0xbb 0x4>; - dma-coherent; - clocks = <&dmaclk 0>; - }; diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml index c21a4f073f6c..18c0a7c18bc8 100644 --- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -22,7 +22,6 @@ properties: - renesas,r9a06g032-dma - const: renesas,rzn1-dma - "#dma-cells": minimum: 3 maximum: 4 diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml index 7b94d24d5ef4..8b42d9880400 100644 --- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml +++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml @@ -120,7 +120,6 @@ properties: - description: LCPA memory base, deprecated, use eSRAM pool instead deprecated: true - reg-names: oneOf: - items: diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml index 11a289f1d505..598903354196 100644 --- a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml @@ -48,7 +48,6 @@ description: | by transfer completion. This must only be used on channels managing transfers for STM32 USART/UART. - maintainers: - Amelie Delaunay <amelie.delaunay@foss.st.com> diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst index 202acac0507a..4a02ea60cbbe 100644 --- a/Documentation/devicetree/bindings/dts-coding-style.rst +++ b/Documentation/devicetree/bindings/dts-coding-style.rst @@ -120,7 +120,8 @@ The following order of properties in device nodes is preferred: 4. Standard/common properties (defined by common bindings, e.g. without vendor-prefixes) 5. Vendor-specific properties -6. "status" (if applicable) +6. "status" (if applicable), preceded by a blank line if there is content + before the property 7. Child nodes, where each node is preceded with a blank line The "status" property is by default "okay", thus it can be omitted. @@ -150,6 +151,7 @@ Example:: #address-cells = <1>; #size-cells = <1>; vendor,custom-property = <2>; + status = "disabled"; child_node: child-class@100 { @@ -165,6 +167,7 @@ Example:: vdd-1v8-supply = <&board_vreg4>; vdd-3v3-supply = <&board_vreg2>; vdd-12v-supply = <&board_vreg3>; + status = "okay"; } diff --git a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml index 3d787dea0f14..136e8fccd429 100644 --- a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml +++ b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Altera SoCFPGA ECC Manager maintainers: - - Matthew Gerlach <matthew.gerlach@altera.com> + - Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com> description: This binding describes the device tree nodes required for the Altera SoCFPGA diff --git a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml index 9afc78254cc0..9637df7af3c8 100644 --- a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml +++ b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml @@ -97,7 +97,6 @@ patternProperties: - reg - memory-controller - '^edacpmd@': description: PMD subnode type: object diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 00e0f07b44f8..e1599ce10916 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -25,6 +25,7 @@ properties: oneOf: - items: - enum: + - anvo,anv32c81w - anvo,anv32e61w - atmel,at25256B - fujitsu,mb85rs1mt diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml index 3faae3236665..c6fc1d6e25da 100644 --- a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml +++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml @@ -23,7 +23,6 @@ description: | The authoritative guest-side hardware interface documentation to the fw_cfg device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree. - properties: compatible: const: qemu,fw-cfg-mmio diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml index 7d2d3b7aa4b7..4c61461d6247 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml +++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml @@ -18,7 +18,6 @@ description: | - Supported Use Models - Constraints - Introduction ============ @@ -31,7 +30,6 @@ description: | document isn't a replacement for any manufacturers specifications for FPGA usage. - Terminology =========== @@ -108,7 +106,6 @@ description: | a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be reprogrammed independently while the rest of the system continues to function. - Sequence ======== @@ -124,7 +121,6 @@ description: | When the overlay is removed, the child nodes will be removed and the FPGA Region will disable the bridges. - FPGA Region =========== @@ -170,7 +166,6 @@ description: | hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges within the static image of the FPGA. - Supported Use Models ==================== diff --git a/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml new file mode 100644 index 000000000000..5121c6120785 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/lattice,ice40-fpga-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lattice iCE40 FPGA Manager + +maintainers: + - Joel Holdsworth <joel@airwebreathe.org.uk> + +properties: + compatible: + const: lattice,ice40-fpga-mgr + + reg: + maxItems: 1 + + spi-max-frequency: + minimum: 1000000 + maximum: 25000000 + + cdone-gpios: + maxItems: 1 + description: GPIO input connected to CDONE pin + + reset-gpios: + maxItems: 1 + description: + Active-low GPIO output connected to CRESET_B pin. Note that unless the + GPIO is held low during startup, the FPGA will enter Master SPI mode and + drive SCK with a clock signal potentially jamming other devices on the bus + until the firmware is loaded. + +required: + - compatible + - reg + - spi-max-frequency + - cdone-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + fpga@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <1000000>; + cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt deleted file mode 100644 index 4dc412437b08..000000000000 --- a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt +++ /dev/null @@ -1,21 +0,0 @@ -Lattice iCE40 FPGA Manager - -Required properties: -- compatible: Should contain "lattice,ice40-fpga-mgr" -- reg: SPI chip select -- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000) -- cdone-gpios: GPIO input connected to CDONE pin -- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note - that unless the GPIO is held low during startup, the - FPGA will enter Master SPI mode and drive SCK with a - clock signal potentially jamming other devices on the - bus until the firmware is loaded. - -Example: - fpga: fpga@0 { - compatible = "lattice,ice40-fpga-mgr"; - reg = <0>; - spi-max-frequency = <1000000>; - cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml index d4430d2d6855..354c0524089c 100644 --- a/Documentation/devicetree/bindings/gnss/gnss-common.yaml +++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml @@ -31,8 +31,7 @@ properties: maxItems: 1 timepulse-gpios: - description: When a timepulse is provided to the GNSS device using a - GPIO line, this is used. + description: Timepulse signal maxItems: 1 additionalProperties: true diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml index c0c2bfaa606f..b349b7bc0412 100644 --- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml +++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: U-blox GNSS Receiver +title: u-blox GNSS receiver allOf: - $ref: gnss-common.yaml# @@ -14,7 +14,7 @@ maintainers: - Johan Hovold <johan@kernel.org> description: > - The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. + The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. properties: compatible: @@ -36,6 +36,9 @@ properties: reset-gpios: maxItems: 1 + safeboot-gpios: + maxItems: 1 + vcc-supply: description: > Main voltage regulator @@ -64,6 +67,7 @@ examples: compatible = "u-blox,neo-8"; v-bckp-supply = <&gnss_v_bckp_reg>; vcc-supply = <&gnss_vcc_reg>; - reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + safeboot-gpios = <&gpio 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; }; }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index c213cb9ddb9f..5cfefbbea6ca 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -66,5 +66,4 @@ examples: interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; }; - ... diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml index ab35bcf98101..23410aeca300 100644 --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -22,7 +22,6 @@ description: | ___ ________ chip select# |___________________| - maintainers: - Maxime Ripard <mripard@kernel.org> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml index aaf97124803f..fed1b06495ad 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -28,6 +28,7 @@ properties: '#address-cells': const: 1 + '#size-cells': const: 0 @@ -35,7 +36,7 @@ properties: maxItems: 1 patternProperties: - "^(?!gpio@)[^@]+@[0-9]+$": + '^(?!gpio@)[^@]+@[0-9]+$': type: object properties: fsl,pinmux-ids: @@ -93,7 +94,7 @@ patternProperties: additionalProperties: false - "^gpio@[0-9]+$": + '^gpio@[0-9]+$': type: object properties: compatible: @@ -110,10 +111,10 @@ patternProperties: interrupt-controller: true - "#interrupt-cells": + '#interrupt-cells': const: 2 - "#gpio-cells": + '#gpio-cells': const: 2 gpio-controller: true @@ -123,8 +124,8 @@ patternProperties: - reg - interrupts - interrupt-controller - - "#interrupt-cells" - - "#gpio-cells" + - '#interrupt-cells' + - '#gpio-cells' - gpio-controller additionalProperties: false diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml index d78da7dd2a56..184432d24ea1 100644 --- a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml @@ -11,7 +11,10 @@ maintainers: properties: compatible: - items: + oneOf: + - items: + - const: microchip,pic64gx-gpio + - const: microchip,mpfs-gpio - enum: - microchip,mpfs-gpio - microchip,coregpio-rtl-v3 diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index ab2afc0e4153..bba6f5b6606f 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -111,8 +111,8 @@ additionalProperties: false required: - compatible - reg - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' examples: - | diff --git a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml index c994177de940..3f4bbd57fc52 100644 --- a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml @@ -22,6 +22,8 @@ properties: - cznic,moxtet-gpio - dlg,slg7xl45106 - fcs,fxl6408 + - fsl,ls1046aqds-fpga-gpio-stat-pres2 + - fsl,lx2160ardb-fpga-gpio-sfp - gateworks,pld-gpio - ibm,ppc4xx-gpio - loongson,ls1x-gpio diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index be198182dbfe..db49b8ff8c74 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt8183-mali - mediatek,mt8183b-mali - mediatek,mt8186-mali + - mediatek,mt8365-mali - realtek,rtd1619-mali - renesas,r9a07g044-mali - renesas,r9a07g054-mali diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml index a5b4e0021758..bee9faf1d3f8 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml @@ -18,6 +18,8 @@ properties: oneOf: - items: - enum: + - mediatek,mt8196-mali + - nxp,imx95-mali # G310 - rockchip,rk3588-mali - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable @@ -44,7 +46,9 @@ properties: minItems: 1 items: - const: core - - const: coregroup + - enum: + - coregroup + - stacks - const: stacks mali-supply: true @@ -91,7 +95,6 @@ required: - interrupts - interrupt-names - clocks - - mali-supply additionalProperties: false @@ -108,6 +111,29 @@ allOf: power-domains: maxItems: 1 power-domain-names: false + required: + - mali-supply + - if: + properties: + compatible: + contains: + const: mediatek,mt8196-mali + then: + properties: + mali-supply: false + sram-supply: false + operating-points-v2: false + power-domains: + maxItems: 1 + power-domain-names: false + clocks: + maxItems: 2 + clock-names: + items: + - const: core + - const: stacks + required: + - power-domains examples: - | @@ -143,5 +169,17 @@ examples: }; }; }; + - | + gpu@48000000 { + compatible = "mediatek,mt8196-mali", "arm,mali-valhall-csf"; + reg = <0x48000000 0x480000>; + clocks = <&gpufreq 0>, <&gpufreq 1>; + clock-names = "core", "stacks"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + power-domains = <&gpufreq>; + }; ... diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml index c87d7bece0ec..225a6e1b7fcd 100644 --- a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml +++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml @@ -15,6 +15,16 @@ properties: oneOf: - items: - enum: + - renesas,r8a7796-gpu + - renesas,r8a77961-gpu + - const: img,img-gx6250 + - const: img,img-rogue + - items: + - const: renesas,r8a77965-gpu + - const: img,img-ge7800 + - const: img,img-rogue + - items: + - enum: - ti,am62-gpu - const: img,img-axe-1-16m # This deprecated element must be kept around to allow old kernels to @@ -86,48 +96,56 @@ allOf: properties: compatible: contains: - const: img,img-axe-1-16m + enum: + - ti,am62-gpu + - ti,j721s2-gpu then: properties: - power-domains: - items: - - description: Power domain A - power-domain-names: + clocks: maxItems: 1 - required: - - power-domains - - power-domain-names - if: properties: compatible: contains: - const: thead,th1520-gpu + enum: + - img,img-ge7800 + - img,img-gx6250 + - thead,th1520-gpu then: properties: clocks: minItems: 3 clock-names: minItems: 3 + + - if: + properties: + compatible: + contains: + const: img,img-axe-1-16m + then: + properties: power-domains: - items: - - description: The single, unified power domain for the GPU on the - TH1520 SoC, integrating all internal IP power domains. - power-domain-names: false + maxItems: 1 + power-domain-names: + maxItems: 1 required: - power-domains + - power-domain-names - if: properties: compatible: contains: - const: img,img-bxs-4-64 + enum: + - img,img-bxs-4-64 + - img,img-ge7800 + - img,img-gx6250 then: properties: power-domains: - items: - - description: Power domain A - - description: Power domain B + minItems: 2 power-domain-names: minItems: 2 required: @@ -138,13 +156,16 @@ allOf: properties: compatible: contains: - enum: - - ti,am62-gpu - - ti,j721s2-gpu + const: thead,th1520-gpu then: properties: - clocks: - maxItems: 1 + power-domains: + items: + - description: The single, unified power domain for the GPU on the + TH1520 SoC, integrating all internal IP power domains. + power-domain-names: false + required: + - power-domains examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 152935334c76..3e3f49cf2f52 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -81,7 +81,6 @@ required: - compatible - reg - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml index f60e06ab7d0a..c2f7c6ee1a37 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -93,7 +93,6 @@ allOf: adi,fault-q: default: 4 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml new file mode 100644 index 000000000000..58c51626a9ce --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/apm,xgene-slimpro-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SLIMpro hwmon + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +properties: + compatible: + const: apm,xgene-slimpro-hwmon + + mboxes: + maxItems: 1 + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + hwmon { + compatible = "apm,xgene-slimpro-hwmon"; + mboxes = <&mailbox 7>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt deleted file mode 100644 index 59b38557f1bb..000000000000 --- a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt +++ /dev/null @@ -1,14 +0,0 @@ -APM X-Gene hwmon driver - -APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox. - -Required properties : - - compatible : should be "apm,xgene-slimpro-hwmon" - - mboxes : use the label reference for the mailbox as the first parameter. - The second parameter is the channel number. - -Example : - hwmonslimpro { - compatible = "apm,xgene-slimpro-hwmon"; - mboxes = <&mailbox 7>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml index 9e5ed901ae54..851fb16ec7fa 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml @@ -18,8 +18,11 @@ description: | properties: compatible: - enum: - - aspeed,ast2600-pwm-tach + oneOf: + - items: + - const: aspeed,ast2700-pwm-tach + - const: aspeed,ast2600-pwm-tach + - const: aspeed,ast2600-pwm-tach reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt deleted file mode 100644 index 106e08c56aaa..000000000000 --- a/Documentation/devicetree/bindings/hwmon/max31785.txt +++ /dev/null @@ -1,22 +0,0 @@ -Bindings for the Maxim MAX31785 Intelligent Fan Controller -========================================================== - -Reference: - -https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf - -The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan -management with temperature and remote voltage sensing. Various fan control -features are provided, including PWM frequency control, temperature hysteresis, -dual tachometer measurements, and fan health monitoring. - -Required properties: -- compatible : One of "maxim,max31785" or "maxim,max31785a" -- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. - -Example: - - fans@52 { - compatible = "maxim,max31785"; - reg = <0x52>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml index b1ff496f87f9..558cbd251b0f 100644 --- a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml +++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml @@ -20,7 +20,11 @@ description: > properties: compatible: - const: maxim,max31790 + enum: + - maxim,max31785 + - maxim,max31785a + - maxim,max31785b + - maxim,max31790 reg: maxItems: 1 @@ -31,11 +35,17 @@ properties: resets: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + "#pwm-cells": const: 1 patternProperties: - "^fan-[0-9]+$": + "^fan@[0-9]+$": $ref: fan-common.yaml# unevaluatedProperties: false @@ -56,13 +66,17 @@ examples: reg = <0x20>; clocks = <&sys_clk>; resets = <&reset 0>; + #address-cells = <1>; #pwm-cells = <1>; + #size-cells = <0>; - fan-0 { + fan@0 { + reg = <0x0>; pwms = <&pwm_provider 1>; }; - fan-1 { + fan@1 { + reg = <0x1>; pwms = <&pwm_provider 2>; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml index 1b871f166e79..164068ba069d 100644 --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -45,7 +45,6 @@ properties: - ti,tmp461 - winbond,w83l771 - interrupts: items: - description: | diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml index b8e500e6cd9f..dc8bc4c6df34 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml @@ -75,6 +75,7 @@ properties: - const: murata,ncp15wl333 - const: murata,ncp03wf104 - const: murata,ncp15xh103 + - const: murata,ncp18wm474 - const: samsung,1404-001221 # Deprecated "ntc," compatible strings - const: ntc,ncp15wb473 diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml new file mode 100644 index 000000000000..fa48af81e083 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/pmbus/adi,max17616.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX17616/MAX17616A Current-Limiter with PMBus Interface + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + The MAX17616/MAX17616A is a 3V to 80V, 7A current-limiter with overvoltage, + surge, undervoltage, reverse polarity, and loss of ground protection. It allows + monitoring of input/output voltage, output current and temperature through the + PMBus serial interface. + Datasheet: + https://www.analog.com/en/products/max17616.html + +properties: + compatible: + const: adi,max17616 + + reg: + maxItems: 1 + + vcc-supply: true + + interrupts: + description: Fault condition signal provided on SMBALERT pin. + maxItems: 1 + +required: + - compatible + - reg + - vcc-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@16 { + compatible = "adi,max17616"; + reg = <0x16>; + vcc-supply = <&vcc>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml new file mode 100644 index 000000000000..aaf244790663 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/st,tsc1641.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST Microelectronics TSC1641 I2C power monitor + +maintainers: + - Igor Reznichenko <igor@reznichenko.net> + +description: | + TSC1641 is a 60 V, 16-bit high-precision power monitor with I2C and + MIPI I3C interface + + Datasheets: + https://www.st.com/resource/en/datasheet/tsc1641.pdf + +properties: + compatible: + const: st,tsc1641 + + reg: + maxItems: 1 + + interrupts: + description: Optional alert interrupt. + maxItems: 1 + + shunt-resistor-micro-ohms: + description: Shunt resistor value in micro-ohms. Since device has internal + 16-bit RSHUNT register with 10 uOhm LSB, the maximum value is capped at + 655.35 mOhm. + minimum: 100 + default: 1000 + maximum: 655350 + + st,alert-polarity-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Default value is 0 which configures the normal polarity of the + ALERT pin, being active low open-drain. Setting this to 1 configures the + polarity of the ALERT pin to be inverted and active high open-drain. + Specify this property to set the alert polarity to active-high. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-sensor@40 { + compatible = "st,tsc1641"; + reg = <0x40>; + shunt-resistor-micro-ohms = <1000>; + st,alert-polarity-active-high; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index cba5b4a1b81f..0fe6ea190f60 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -20,7 +20,6 @@ description: | https://www.ti.com/lit/gpn/tmp513 https://www.ti.com/lit/gpn/tmp512 - properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml index ee7de53e1918..d57e4bf8f65f 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml @@ -15,7 +15,6 @@ description: | Datasheets: https://www.ti.com/lit/gpn/tps23861 - properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml index b6af924dee2e..d8610daa10cd 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml @@ -27,7 +27,6 @@ description: |+ | '------' | | dev | | dev | | dev | '------------' '-----' '-----' '-----' - allOf: - $ref: /schemas/i2c/i2c-mux.yaml# diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml index 758d8f6321e1..06a04db3eda2 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml @@ -9,7 +9,7 @@ title: Qualcomm Universal Peripheral (QUP) I2C controller maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml index 17ce39c19ab1..f9a449fee2b0 100644 --- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml @@ -64,7 +64,6 @@ patternProperties: required: - reg - allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml index 28139b676661..19cfffb39296 100644 --- a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml +++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml @@ -16,7 +16,6 @@ description: | can be selected by writing the appropriate device number to an I2C config register. - +--------------------------------------------------+ | Mule | 0x18| +---------------+ | @@ -34,7 +33,6 @@ description: | | |__/ +--------+ | +--------------------------------------------------+ - allOf: - $ref: /schemas/i2c/i2c-mux.yaml# diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml index 8dae89ecb64d..b91bfb16ed6b 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml @@ -30,7 +30,6 @@ description: | * https://www.analog.com/en/products/adaq4380-4.html * https://www.analog.com/en/products/adaq4381-4.html - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 1180d2ffbf84..73c8e9c532f3 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -166,7 +166,6 @@ properties: An example of backend can be found at http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html - patternProperties: "^channel@[1-8]$": type: object diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml index 9ee4d977c5ed..238a8c9c4143 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -48,7 +48,6 @@ properties: enum: [2500000, 4096000] default: 4096000 - '#io-channel-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml index bd429552d568..f22eba0250ee 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml @@ -57,7 +57,6 @@ properties: description: External clock source when not using crystal maxItems: 1 - "#clock-cells": description: ADE9000 can provide clock output via CLKOUT pin with external buffer. diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml index 4e695b97d015..9ea44ce63f25 100644 --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml @@ -36,7 +36,6 @@ properties: "#io-channel-cells": const: 1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 17bb60e18a1c..c4c4575d3fa9 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -456,7 +456,6 @@ patternProperties: items: minimum: 40 - - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml index 1caa896fce82..de91cb03fdc6 100644 --- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml @@ -57,7 +57,6 @@ description: | 4 | batt_dischrg_i 5 | ts_v - properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index 4151f99b42aa..9752d1450064 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -29,7 +29,6 @@ description: | | GND - properties: compatible: const: voltage-divider diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml index 64f2352aac3d..ca40359a3944 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml @@ -37,7 +37,6 @@ required: - compatible - reg - allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml index c33640ddde58..886f4129c301 100644 --- a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml @@ -12,7 +12,6 @@ maintainers: description: | Pressure sensor from Murata with SPI and I2C bus interfaces. - properties: compatible: const: murata,zpa2326 diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml index 48f221463166..8fed45ee557b 100644 --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml @@ -78,7 +78,6 @@ properties: minItems: 3 maxItems: 3 - semtech,ph01-resolution: $ref: /schemas/types.yaml#/definitions/uint32 enum: [8, 16, 32, 64, 128, 256, 512, 1024] diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 312febeeb3bb..a22725f7619b 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -39,7 +39,6 @@ $defs: - reg - adi,sensor-type - properties: compatible: oneOf: @@ -88,7 +87,7 @@ properties: const: 0 patternProperties: - "^thermocouple@": + '^thermocouple@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false @@ -146,7 +145,7 @@ patternProperties: required: - adi,custom-thermocouple - "^diode@": + '^diode@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false @@ -191,7 +190,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 default: 0 - "^rtd@": + '^rtd@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: RTD sensor. @@ -280,7 +279,7 @@ patternProperties: type: boolean dependencies: - adi,current-rotate: [ "adi,rsense-share" ] + adi,current-rotate: [ 'adi,rsense-share' ] - if: properties: @@ -290,7 +289,7 @@ patternProperties: required: - adi,custom-rtd - "^thermistor@": + '^thermistor@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Thermistor sensor. @@ -364,7 +363,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ "adi,rsense-share" ] + adi,current-rotate: [ 'adi,rsense-share' ] allOf: - if: @@ -392,7 +391,7 @@ patternProperties: required: - adi,custom-thermistor - "^adc@": + '^adc@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Direct ADC sensor. @@ -407,7 +406,7 @@ patternProperties: description: Whether the sensor is single-ended. type: boolean - "^temp@": + '^temp@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Active analog temperature sensor. @@ -437,7 +436,7 @@ patternProperties: required: - adi,custom-temp - "^rsense@": + '^rsense@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Sense resistor sensor. @@ -476,7 +475,7 @@ allOf: - adi,ltc2984 then: patternProperties: - "^temp@": false + '^temp@': false examples: - | diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml index 29515151abe9..da629d511da1 100644 --- a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml index da1818824373..1bce389d0e5c 100644 --- a/Documentation/devicetree/bindings/input/ti,drv266x.yaml +++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml @@ -37,7 +37,6 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml index c593ae63d0ec..12256ae7df90 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST-Microelectronics FingerTip touchscreen controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The ST-Microelectronics FingerTip device provides a basic touchscreen diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 256de140c03d..afa4d3539f5c 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Interconnect Bandwidth Monitor maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: | Bandwidth Monitor measures current throughput on buses between various NoC diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index dad3ad2fd93b..da16d8e9bdc5 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -122,7 +122,6 @@ allOf: required: - reg - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index f3247a47f9ee..bfd30aae682b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -305,7 +305,6 @@ examples: }; }; - device@0 { reg = <0 4>; interrupts = <1 1 4 &part0>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml index 999df5b905c5..258d21fe6e35 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml @@ -54,7 +54,6 @@ properties: | |---... +---------+---module31 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml index 5fda626c80ce..2ff390c1705b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml @@ -34,8 +34,6 @@ properties: required: - compatible - reg - - interrupt-controller - - '#interrupt-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml index c49688be1058..5c768c1e159c 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -20,6 +20,7 @@ properties: - fsl,imx8qm-irqsteer - fsl,imx8qxp-irqsteer - fsl,imx94-irqsteer + - fsl,imx95-irqsteer - const: fsl,imx-irqsteer reg: @@ -87,6 +88,7 @@ allOf: - fsl,imx8mp-irqsteer - fsl,imx8qm-irqsteer - fsl,imx8qxp-irqsteer + - fsl,imx95-irqsteer then: required: - power-domains diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml index fdc254f8d013..55b1ae863b91 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml @@ -14,7 +14,6 @@ description: Vybrid SoC's but is only really useful in dual core configurations (VF6xx which comes with a Cortex-A5/Cortex-M4 combination). - maintainers: - Frank Li <Frank.Li@nxp.com> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 60441f0c5d72..f63b23f48d8e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -78,7 +78,6 @@ required: - '#interrupt-cells' - loongson,parent_int_map - unevaluatedProperties: false if: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml index fdcb4d8db818..20dfffb34f0c 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml @@ -18,7 +18,6 @@ description: flush command is executed. With CIRQ, MCUSYS can be completely turned off to improve the system power consumption without losing interrupts. - properties: compatible: items: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml index 4ff609faba32..d943ea820cdd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml @@ -26,7 +26,6 @@ properties: - mscc,ocelot-icpu-intr - mscc,serval-icpu-intr - '#interrupt-cells': const: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 6fdb7ae9e85a..e80820cc55a7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -61,6 +61,7 @@ properties: - anlogic,dr1v90-plic - canaan,k210-plic - eswin,eic7700-plic + - microchip,pic64gx-plic - sifive,fu540-c000-plic - spacemit,k1-plic - starfive,jh7100-plic diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml index 6e3d6e6d9e07..61b30a7732ec 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI OMAP4 Wake-up Generator maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: > All TI OMAP4/5 (and their derivatives) are interrupt controllers that route diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 89495f094d52..cdbd23b5c08c 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -35,6 +35,8 @@ properties: - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,glymur-smmu-500 + - qcom,kaanapali-smmu-500 - qcom,milos-smmu-500 - qcom,qcm2290-smmu-500 - qcom,qcs615-smmu-500 @@ -89,6 +91,8 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,glymur-smmu-500 + - qcom,kaanapali-smmu-500 - qcom,milos-smmu-500 - qcom,qcm2290-smmu-500 - qcom,qcs615-smmu-500 @@ -638,7 +642,6 @@ examples: <&smmu1 7>; }; - /* SMMU with stream matching */ smmu2: iommu@ba5f0000 { compatible = "arm,smmu-v1"; @@ -664,7 +667,6 @@ examples: iommus = <&smmu2 1 0x30>; }; - /* ARM MMU-500 with 10-bit stream ID input configuration */ smmu3: iommu@ba600000 { compatible = "arm,mmu-500", "arm,smmu-v2"; @@ -685,8 +687,6 @@ examples: /* bus whose child devices emit one unique 10-bit stream ID each, but may master through multiple SMMU TBUs */ iommu-map = <0 &smmu3 0 0x400>; - - }; - |+ diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml index f49ed8ac4776..79c573c47b08 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml @@ -82,6 +82,9 @@ properties: - mediatek,mt8188-iommu-vdo # generation two - mediatek,mt8188-iommu-vpp # generation two - mediatek,mt8188-iommu-infra # generation two + - mediatek,mt8189-iommu-apu # generation two + - mediatek,mt8189-iommu-infra # generation two + - mediatek,mt8189-iommu-mm # generation two - mediatek,mt8192-m4u # generation two - mediatek,mt8195-iommu-vdo # generation two - mediatek,mt8195-iommu-vpp # generation two @@ -128,6 +131,7 @@ properties: This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in dt-binding/memory/mediatek,mt8188-memory-port.h for mt8188, + dt-binding/memory/mediatek,mt8189-memory-port.h for mt8189, dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623, dt-binding/memory/mt2712-larb-port.h for mt2712, dt-binding/memory/mt6779-larb-port.h for mt6779, @@ -164,6 +168,7 @@ allOf: - mediatek,mt8186-iommu-mm - mediatek,mt8188-iommu-vdo - mediatek,mt8188-iommu-vpp + - mediatek,mt8189-iommu-mm - mediatek,mt8192-m4u - mediatek,mt8195-iommu-vdo - mediatek,mt8195-iommu-vpp @@ -180,6 +185,7 @@ allOf: - mediatek,mt8186-iommu-mm - mediatek,mt8188-iommu-vdo - mediatek,mt8188-iommu-vpp + - mediatek,mt8189-iommu-mm - mediatek,mt8192-m4u - mediatek,mt8195-iommu-vdo - mediatek,mt8195-iommu-vpp @@ -208,6 +214,8 @@ allOf: contains: enum: - mediatek,mt8188-iommu-infra + - mediatek,mt8189-iommu-apu + - mediatek,mt8189-iommu-infra - mediatek,mt8195-iommu-infra then: diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml index 3e5623edd207..93a489025317 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml @@ -32,14 +32,18 @@ properties: - const: qcom,msm-iommu-v2 clocks: + minItems: 2 items: - description: Clock required for IOMMU register group access - description: Clock required for underlying bus access + - description: Clock required for Translation Buffer Unit access clock-names: + minItems: 2 items: - const: iface - const: bus + - const: tbu power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml b/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml new file mode 100644 index 000000000000..786beced5590 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/arc,arc2c0608.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ArcticSand arc2c0608 LED driver + +description: | + The ArcticSand arc2c0608 LED driver provides ultra + efficient notebook backlighting. Optional properties not + specified will default to values in IC EPROM. + + Datasheet: + https://www.murata.com/-/media/webrenewal/products/power/power-semiconductor/overview/lineup/led-boost/arc2/arc2c0608.ashx. + +maintainers: + - Brian Dodge <bdodge@arcticsand.com> + +allOf: + - $ref: /schemas/leds/common.yaml + +properties: + compatible: + const: arc,arc2c0608 + + reg: + maxItems: 1 + + default-brightness: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4095 + + led-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: List of enabled channels + items: + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + uniqueItems: true + + arc,led-config-0: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fading speed (period between intensity + steps) + + arc,led-config-1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: If set, sets ILED_CONFIG register. Used for + fine tuning the maximum LED current. + + arc,dim-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PWM mode frequency setting (bits [3:0] used) + + arc,comp-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Setting for register CONFIG_COMP which + controls internal resitances, feed forward freqs, + and initial VOUT at startup. Consult the datasheet. + + arc,filter-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: RC and PWM Filter settings. + Bit Assignment + 7654 3 2 1 0 + xxxx RCF1 RCF0 PWM1 PWM0 + RCF statuses PWM Filter Statues + 00 = OFF (default) 00 = OFF (default) + 01 = LOW 01 = 2 STEPS + 10 - MEDIUM 10 = 4 STEPS + 11 = HIGH 11 = 8 STEPS + + arc,trim-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Sets percentage increase of Maximum LED + Current. + 0x00 = 0% increase. + 0x20 = 20.2%. + 0x3F = 41.5% + + label: true + + linux,default-trigger: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "arc,arc2c0608"; + reg = <0x30>; + default-brightness = <500>; + label = "lcd-backlight"; + linux,default-trigger = "backlight"; + led-sources = <0 1 2 5>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt deleted file mode 100644 index 230abdefd6e7..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for ArcticSand arc2c0608 LED driver - -Required properties: -- compatible: should be "arc,arc2c0608" -- reg: slave address - -Optional properties: -- default-brightness: brightness value on boot, value from: 0-4095 -- label: The name of the backlight device - See Documentation/devicetree/bindings/leds/common.txt -- led-sources: List of enabled channels from 0 to 5. - See Documentation/devicetree/bindings/leds/common.txt - -- arc,led-config-0: setting for register ILED_CONFIG_0 -- arc,led-config-1: setting for register ILED_CONFIG_1 -- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) -- arc,comp-config: setting for register CONFIG_COMP -- arc,filter-config: setting for register FILTER_CONFIG -- arc,trim-config: setting for register IMAXTUNE - -Note: Optional properties not specified will default to values in IC EPROM - -Example: - -arc2c0608@30 { - compatible = "arc,arc2c0608"; - reg = <0x30>; - default-brightness = <500>; - label = "lcd-backlight"; - linux,default-trigger = "backlight"; - led-sources = <0 1 2 5>; -}; - diff --git a/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml b/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml new file mode 100644 index 000000000000..f48ce7a3434d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/awinic,aw99706.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW99706 6-channel WLED Backlight Driver + +maintainers: + - Junjie Cao <caojunjie650@gmail.com> + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: awinic,aw99706 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to use to enable/disable the backlight (HWEN pin). + maxItems: 1 + + awinic,dim-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Select dimming mode of the device. + 0 = Bypass mode. + 1 = DC mode. + 2 = MIX mode(PWM at low brightness and DC at high brightness). + 3 = MIX-26k mode(MIX mode with different PWM frequency). + enum: [ 0, 1, 2, 3 ] + default: 1 + + awinic,sw-freq-hz: + description: Boost switching frequency in Hz. + enum: [ 300000, 400000, 500000, 600000, 660000, 750000, 850000, 1000000, + 1200000, 1330000, 1500000, 1700000 ] + default: 750000 + + awinic,sw-ilmt-microamp: + description: Switching current limitation in uA. + enum: [ 1500000, 2000000, 2500000, 3000000 ] + default: 3000000 + + awinic,iled-max-microamp: + description: Maximum LED current setting in uA. + minimum: 5000 + maximum: 50000 + multipleOf: 500 + default: 20000 + + awinic,uvlo-thres-microvolt: + description: UVLO(Under Voltage Lock Out) in uV. + enum: [ 2200000, 5000000 ] + default: 2200000 + + awinic,ramp-ctl: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Select ramp control and filter of the device. + 0 = Fade in/fade out. + 1 = Light filter. + 2 = Medium filter. + 3 = Heavy filter. + enum: [ 0, 1, 2, 3 ] + default: 2 + +required: + - compatible + - reg + - enable-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@76 { + compatible = "awinic,aw99706"; + reg = <0x76>; + enable-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + default-brightness = <2047>; + max-brightness = <4095>; + awinic,dim-mode = <1>; + awinic,sw-freq-hz = <750000>; + awinic,sw-ilmt-microamp = <3000000>; + awinic,uvlo-thres-microvolt = <2200000>; + awinic,iled-max-microamp = <20000>; + awinic,ramp-ctl = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 274f83288a92..f4e44b33f56d 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -173,6 +173,12 @@ properties: led-max-microamp. $ref: /schemas/types.yaml#/definitions/uint32 + default-brightness: + description: + Brightness to be set if LED's default state is on. Used only during + initialization. If the option is not set then max brightness is used. + $ref: /schemas/types.yaml#/definitions/uint32 + panic-indicator: description: This property specifies that the LED should be used, if at all possible, diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml index 61b97e8bc36d..6c4fcefbe25f 100644 --- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml +++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml @@ -40,6 +40,13 @@ patternProperties: initialization. If the option is not set then max brightness is used. $ref: /schemas/types.yaml#/definitions/uint32 + enable-gpios: + description: + GPIO for LED hardware enable control. Set active when brightness is + non-zero and inactive when brightness is zero. + The GPIO default state follows the "default-state" property. + maxItems: 1 + required: - pwms - max-brightness diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index 841a0229c472..c4b7e57b2518 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -13,6 +13,11 @@ description: > The Qualcomm Light Pulse Generator consists of three different hardware blocks; a ramp generator with lookup table (LUT), the light pulse generator and a three channel current sink. These blocks are found in a wide range of Qualcomm PMICs. + The light pulse generator (LPG) can also be used independently to output PWM + signal for standard PWM applications. In this scenario, the LPG output should + be routed to a specific PMIC GPIO by setting the GPIO pin mux to the special + functions indicated in the datasheet, the TRILED driver for the channel will + not be enabled in this configuration. properties: compatible: diff --git a/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml index fa03e73622d4..b409b2a8b5c5 100644 --- a/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PM8058 PMIC LED maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The Qualcomm PM8058 contains an LED block for up to six LEDs:: three normal diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml index bcf0ad4ea57e..05250aefd385 100644 --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -24,6 +24,7 @@ properties: - enum: - qcom,pm6150l-flash-led - qcom,pm660l-flash-led + - qcom,pm7550-flash-led - qcom,pm8150c-flash-led - qcom,pm8150l-flash-led - qcom,pm8350c-flash-led diff --git a/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml new file mode 100644 index 000000000000..815f08d61de8 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/apm,xgene-slimpro-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SLIMpro mailbox + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +description: + The APM X-Gene SLIMpro mailbox is used to communicate messages between + the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple + interrupt based door bell mechanism and can exchange simple messages using the + internal registers. + +properties: + compatible: + const: apm,xgene-slimpro-mbox + + reg: + maxItems: 1 + + interrupts: + items: + - description: mailbox channel 0 doorbell + - description: mailbox channel 1 doorbell + - description: mailbox channel 2 doorbell + - description: mailbox channel 3 doorbell + - description: mailbox channel 4 doorbell + - description: mailbox channel 5 doorbell + - description: mailbox channel 6 doorbell + - description: mailbox channel 7 doorbell + + '#mbox-cells': + description: Number of mailbox channel. + const: 1 + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + mailbox@10540000 { + compatible = "apm,xgene-slimpro-mbox"; + reg = <0x10540000 0xa000>; + #mbox-cells = <1>; + interrupts = <0x0 0x0 0x4>, + <0x0 0x1 0x4>, + <0x0 0x2 0x4>, + <0x0 0x3 0x4>, + <0x0 0x4 0x4>, + <0x0 0x5 0x4>, + <0x0 0x6 0x4>, + <0x0 0x7 0x4>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml index d9a4f4a02d7c..e45b661e8b41 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -52,7 +52,6 @@ properties: - const: arm,mhu-doorbell - const: arm,primecell - reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml index 02f06314d85f..3828d77f6316 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml @@ -127,7 +127,6 @@ properties: - minimum: 0 maximum: 124 - '#mbox-cells': description: | It is always set to 2. The first argument in the consumers 'mboxes' diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml index 8a1369df4ecb..4ca0d5e49c79 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml @@ -26,7 +26,6 @@ properties: - mediatek,mt8188-adsp-mbox - const: mediatek,mt8186-adsp-mbox - "#mbox-cells": const: 0 diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 615ed103b7e6..f40dc9048327 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -187,10 +187,10 @@ allOf: enum: - qcom,msm8916-apcs-kpss-global then: - $ref: "#/$defs/msm8916-apcs-clock-controller" + $ref: '#/$defs/msm8916-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/msm8916-apcs-clock-controller" + $ref: '#/$defs/msm8916-apcs-clock-controller' - if: properties: @@ -199,10 +199,10 @@ allOf: enum: - qcom,msm8939-apcs-kpss-global then: - $ref: "#/$defs/msm8939-apcs-clock-controller" + $ref: '#/$defs/msm8939-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/msm8939-apcs-clock-controller" + $ref: '#/$defs/msm8939-apcs-clock-controller' - if: properties: @@ -211,10 +211,10 @@ allOf: enum: - qcom,sdx55-apcs-gcc then: - $ref: "#/$defs/sdx55-apcs-clock-controller" + $ref: '#/$defs/sdx55-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/sdx55-apcs-clock-controller" + $ref: '#/$defs/sdx55-apcs-clock-controller' - if: properties: @@ -223,10 +223,10 @@ allOf: enum: - qcom,ipq6018-apcs-apps-global then: - $ref: "#/$defs/ipq6018-apcs-clock-controller" + $ref: '#/$defs/ipq6018-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/ipq6018-apcs-clock-controller" + $ref: '#/$defs/ipq6018-apcs-clock-controller' - if: properties: diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt deleted file mode 100644 index e46451bb242f..000000000000 --- a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt +++ /dev/null @@ -1,35 +0,0 @@ -The APM X-Gene SLIMpro mailbox is used to communicate messages between -the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple -interrupt based door bell mechanism and can exchange simple messages using the -internal registers. - -There are total of 8 interrupts in this mailbox. Each used for an individual -door bell (or mailbox channel). - -Required properties: -- compatible: Should be as "apm,xgene-slimpro-mbox". - -- reg: Contains the mailbox register address range. - -- interrupts: 8 interrupts must be from 0 to 7, interrupt 0 define the - the interrupt for mailbox channel 0 and interrupt 1 for - mailbox channel 1 and so likewise for the reminder. - -- #mbox-cells: only one to specify the mailbox channel number. - -Example: - -Mailbox Node: - mailbox: mailbox@10540000 { - compatible = "apm,xgene-slimpro-mbox"; - reg = <0x0 0x10540000 0x0 0xa000>; - #mbox-cells = <1>; - interrupts = <0x0 0x0 0x4>, - <0x0 0x1 0x4>, - <0x0 0x2 0x4>, - <0x0 0x3 0x4>, - <0x0 0x4 0x4>, - <0x0 0x5 0x4>, - <0x0 0x6 0x4>, - <0x0 0x7 0x4>, - }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml index fe83b5cb1278..04d6473d666f 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -142,7 +142,7 @@ patternProperties: - compatible - reg - reg-names - - "#mbox-cells" + - '#mbox-cells' - xlnx,ipi-id required: diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml index 5a920d9e78c7..fa18013d705d 100644 --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml @@ -45,7 +45,6 @@ patternProperties: between driver and firmware. Implement via mailbox on driver. $ref: /schemas/mailbox/fsl,mu.yaml# - "^vpu-core@[0-9a-f]+$": description: Each core correspond a decoder or encoder, need to configure them diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml index 511ac0d67a7f..988a5b3a62bd 100644 --- a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml +++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml @@ -16,7 +16,7 @@ maintainers: properties: compatible: - const: "fsl,imx6q-vdoa" + const: fsl,imx6q-vdoa reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml index 2dc2829d42a0..f8d9889dbc21 100644 --- a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml @@ -154,7 +154,5 @@ examples: }; }; }; - - }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml index ebd95a8d9b2f..4cb0f5aa1301 100644 --- a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml index e563e35920c4..9df1e0f872f2 100644 --- a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5K6A3(YX) raw image sensor maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml index c9673391afdb..0592d0b9af92 100644 --- a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml +++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml @@ -70,7 +70,6 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: Video port for the decoder output. - required: - port@0 - port@1 diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml new file mode 100644 index 000000000000..8ca33a733c47 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8173-mdp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8173 Media Data Path + +maintainers: + - Ariel D'Alessandro <ariel.dalessandro@collabora.com> + +description: + Media Data Path is used for scaling and color space conversion. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-mdp-rdma + - mediatek,mt8173-mdp-rsz + - mediatek,mt8173-mdp-wdma + - mediatek,mt8173-mdp-wrot + - items: + - const: mediatek,mt8173-mdp-rdma + - const: mediatek,mt8173-mdp + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + mediatek,vpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to Mediatek Video Processor Unit for HW Codec encode/decode and + image processing. + +required: + - compatible + - reg + - clocks + - power-domains + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8173-mdp-rdma + then: + properties: + clocks: + items: + - description: Main clock + - description: Mutex clock + else: + properties: + clocks: + items: + - description: Main clock + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8173-mdp-rdma + - mediatek,mt8173-mdp-wdma + - mediatek,mt8173-mdp-wrot + then: + required: + - iommus + + - if: + properties: + compatible: + contains: + const: mediatek,mt8173-mdp + then: + required: + - mediatek,vpu + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/memory/mt8173-larb-port.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mdp_rdma0: rdma@14001000 { + compatible = "mediatek,mt8173-mdp-rdma", + "mediatek,mt8173-mdp"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mediatek,vpu = <&vpu>; + }; + + mdp_rdma1: rdma@14002000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA1>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA1>; + }; + + mdp_rsz0: rsz@14003000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz1: rsz@14004000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz2: rsz@14005000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ2>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + }; + + mdp_wdma0: wdma@14006000 { + compatible = "mediatek,mt8173-mdp-wdma"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WDMA>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WDMA>; + }; + + mdp_wrot0: wrot@14007000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + }; + + mdp_wrot1: wrot@14008000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14008000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT1>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt deleted file mode 100644 index 253a93eabb5e..000000000000 --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt +++ /dev/null @@ -1,96 +0,0 @@ -* Mediatek Media Data Path - -Media Data Path is used for scaling and color space conversion. - -Required properties (controller node): -- compatible: "mediatek,mt8173-mdp" -- mediatek,vpu: the node of video processor unit, see - Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml for - details. - -Required properties (all function blocks, child node): -- compatible: Should be one of - "mediatek,mt8173-mdp-rdma" - read DMA - "mediatek,mt8173-mdp-rsz" - resizer - "mediatek,mt8173-mdp-wdma" - write DMA - "mediatek,mt8173-mdp-wrot" - write DMA with rotation -- reg: Physical base address and length of the function block register space -- clocks: device clocks, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- power-domains: a phandle to the power domain, see - Documentation/devicetree/bindings/power/power_domain.txt for details. - -Required properties (DMA function blocks, child node): -- compatible: Should be one of - "mediatek,mt8173-mdp-rdma" - "mediatek,mt8173-mdp-wdma" - "mediatek,mt8173-mdp-wrot" -- iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml - for details. - -Example: - mdp_rdma0: rdma@14001000 { - compatible = "mediatek,mt8173-mdp-rdma"; - "mediatek,mt8173-mdp"; - reg = <0 0x14001000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RDMA0>, - <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_RDMA0>; - mediatek,vpu = <&vpu>; - }; - - mdp_rdma1: rdma@14002000 { - compatible = "mediatek,mt8173-mdp-rdma"; - reg = <0 0x14002000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RDMA1>, - <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_RDMA1>; - }; - - mdp_rsz0: rsz@14003000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14003000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; - - mdp_rsz1: rsz@14004000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14004000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; - - mdp_rsz2: rsz@14005000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14005000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ2>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; - - mdp_wdma0: wdma@14006000 { - compatible = "mediatek,mt8173-mdp-wdma"; - reg = <0 0x14006000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WDMA>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WDMA>; - }; - - mdp_wrot0: wrot@14007000 { - compatible = "mediatek,mt8173-mdp-wrot"; - reg = <0 0x14007000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WROT0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WROT0>; - }; - - mdp_wrot1: wrot@14008000 { - compatible = "mediatek,mt8173-mdp-wrot"; - reg = <0 0x14008000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WROT1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WROT1>; - }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml index 4cba42ba7cf7..b5aca3d2cc5c 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml @@ -79,7 +79,6 @@ allOf: power-domains: minItems: 2 # Wrapper and 1 slot - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml index d195f1bfb23d..c99fe4106eee 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml @@ -484,7 +484,6 @@ examples: "gcc_axi_hf", "gcc_axi_sf"; - iommus = <&apps_smmu 0x2000 0x4e0>, <&apps_smmu 0x2020 0x4e0>, <&apps_smmu 0x2040 0x4e0>, diff --git a/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml b/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml index c9a0fcafe53f..c42d3470bdac 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8750 SoC Iris video encoder and decoder maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The Iris video processing unit on Qualcomm SM8750 SoC is a video encode and diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml index dd6cc7ac1f7c..2ddca4167b0b 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> properties: diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml index 2ba27b230559..17ece4eb300c 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> description: diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml index 71d63bb9abb5..c8894358c46c 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> description: @@ -111,7 +111,6 @@ patternProperties: reg: maxItems: 1 - clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml index f80eca0a4f41..bda724897293 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC series camera host interface (FIMC-LITE) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> description: diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml index 2a54379d9509..1bfba84f8854 100644 --- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> description: | diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml index 1b75390fdaac..1af5d7ac382c 100644 --- a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml +++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5C73M3 8Mp camera ISP maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Sylwester Nawrocki <s.nawrocki@samsung.com> description: diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml index e28d6ec56c0b..5c969e764d4f 100644 --- a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml +++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml @@ -42,7 +42,6 @@ properties: reg: maxItems: 1 - required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml index 4afa4a24b868..b9f7d84f38c2 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml @@ -21,7 +21,6 @@ description: format and copy the result into a part or the whole of a destination image with a different color format. (TODO) - maintainers: - Dillon Min <dillon.minfei@gmail.com> diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml index 3ad1590b0496..a81d2a155fe6 100644 --- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml +++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml @@ -128,7 +128,6 @@ properties: 0 degrees camera rotation: - Y-Rp ^ Y-Rc ! @@ -145,7 +144,6 @@ properties: 0 +-------------------------------------> 0 X-Rc - X-Rc 0 <------------------------------------+ 0 X-Rp 0 ! @@ -228,7 +226,6 @@ properties: V X-Rc - Example one - Webcam A camera module installed on the user facing part of a laptop screen @@ -273,7 +270,6 @@ properties: optical inversion, the two reference systems will not be aligned, with 'Rp' being rotated 180 degrees relatively to 'Rc': - X-Rc 0 <------------------------------------+ 0 ! diff --git a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml index 29f8c30e8a88..aec88cd2df76 100644 --- a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml @@ -62,7 +62,6 @@ properties: minimum: 0 maximum: 15 - # FAST chip selects qcom,xmem-address-hold-enable: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml index f329223cec07..cbc3a2485a2f 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml @@ -48,16 +48,16 @@ properties: reg: maxItems: 1 - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 1 ranges: true patternProperties: - "^lpc-ctrl@[0-9a-f]+$": + '^lpc-ctrl@[0-9a-f]+$': type: object additionalProperties: false @@ -92,7 +92,7 @@ patternProperties: - compatible - clocks - "^reset-controller@[0-9a-f]+$": + '^reset-controller@[0-9a-f]+$': type: object additionalProperties: false @@ -118,7 +118,7 @@ patternProperties: - compatible - '#reset-cells' - "^lpc-snoop@[0-9a-f]+$": + '^lpc-snoop@[0-9a-f]+$': type: object additionalProperties: false @@ -152,15 +152,15 @@ patternProperties: - interrupts - snoop-ports - "^uart-routing@[0-9a-f]+$": + '^uart-routing@[0-9a-f]+$': $ref: /schemas/soc/aspeed/uart-routing.yaml# description: The UART routing control under LPC register space required: - compatible - reg - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' - ranges additionalProperties: diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt deleted file mode 100644 index 07c69c0c6624..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Dialog DA9052/53 Power Management Integrated Circuit (PMIC) - -Required properties: -- compatible : Should be "dlg,da9052", "dlg,da9053-aa", - "dlg,da9053-ab", or "dlg,da9053-bb" - -Optional properties: -- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen - input lines are used as general purpose analogue - input. -- tsiref-supply: Phandle to the regulator, which provides the reference - voltage for the TSIREF pin. Must be provided when the - touchscreen pins are used for ADC purposes. - -Sub-nodes: -- regulators : Contain the regulator nodes. The DA9052/53 regulators are - bound using their names as listed below: - - buck1 : regulator BUCK CORE - buck2 : regulator BUCK PRO - buck3 : regulator BUCK MEM - buck4 : regulator BUCK PERI - ldo1 : regulator LDO1 - ldo2 : regulator LDO2 - ldo3 : regulator LDO3 - ldo4 : regulator LDO4 - ldo5 : regulator LDO5 - ldo6 : regulator LDO6 - ldo7 : regulator LDO7 - ldo8 : regulator LDO8 - ldo9 : regulator LDO9 - ldo10 : regulator LDO10 - - The bindings details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -Examples: - -i2c@63fc8000 { /* I2C1 */ - - pmic: dialog@48 { - compatible = "dlg,da9053-aa"; - reg = <0x48>; - - regulators { - buck1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - }; - - buck2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - }; - - buck3 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - }; - - buck4 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml new file mode 100644 index 000000000000..1103a8cc5cea --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/dlg,da9052.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9052/53 Power Management Integrated Circuit (PMIC) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - dlg,da9053-aa + - dlg,da9053-ab + - dlg,da9053-bb + - dlg,da9053-bc + - dlg,da9052 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dlg,tsi-as-adc: + type: boolean + description: + if set the X+, X-, Y+, Y- touchscreen input lines are used as general + purpose analogue input. + + tsiref-supply: + description: The reference voltage for the TSIREF pin. + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^(ldo([1-9]|10)|buck[1-4])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - regulators + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "dlg,da9053-aa"; + reg = <0x48>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + buck4 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index 51612dc22748..4f08e9ac7e56 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -81,6 +81,8 @@ properties: watchdog: $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml + wakeup-source: true + patternProperties: "^(.+-hog(-[0-9]+)?)$": type: object diff --git a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml index d2886f2686a8..cfa69f1f380a 100644 --- a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml +++ b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml @@ -93,38 +93,14 @@ properties: leds: type: object - $ref: /schemas/leds/common.yaml# + additionalProperties: false properties: - reg: - description: | - One of - MC13783 LED IDs - 0: Main display - 1: AUX display - 2: Keypad - 3: Red 1 - 4: Green 1 - 5: Blue 1 - 6: Red 2 - 7: Green 2 - 8: Blue 2 - 9: Red 3 - 10: Green 3 - 11: Blue 3 - - MC13892 LED IDs - 0: Main display - 1: AUX display - 2: Keypad - 3: Red - 4: Green - 5: Blue - - MC34708 LED IDs - 0: Charger Red - 1: Charger Green - maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 led-control: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -132,6 +108,42 @@ properties: Setting for LED-Control register array length depends on model, mc13783: 6, mc13892: 4, mc34708: 1 + patternProperties: + '^led@[0-9a-b]$': + $ref: /schemas/leds/common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: | + One of + MC13783 LED IDs + 0: Main display + 1: AUX display + 2: Keypad + 3: Red 1 + 4: Green 1 + 5: Blue 1 + 6: Red 2 + 7: Green 2 + 8: Blue 2 + 9: Red 3 + 10: Green 3 + 11: Blue 3 + + MC13892 LED IDs + 0: Main display + 1: AUX display + 2: Keypad + 3: Red + 4: Green + 5: Blue + + MC34708 LED IDs + 0: Charger Red + 1: Charger Green + maxItems: 1 + regulators: type: object @@ -262,7 +274,7 @@ examples: #size-cells = <0>; led-control = <0x000 0x000 0x0e0 0x000>; - sysled@3 { + led@3 { reg = <3>; label = "system:red:live"; linux,default-trigger = "heartbeat"; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml index 0ec89f0adc64..8b62aadb4213 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml @@ -26,6 +26,18 @@ properties: interrupts: maxItems: 1 + interrupt-controller: + description: + The driver implements an interrupt controller for the sub devices. + The interrupt number mapping is as follows + 0 - charger + 1 - topsys + 2 - fuelgauge + 3 - usb type-c management block. + + '#interrupt-cells': + const: 1 + haptic: type: object additionalProperties: false @@ -118,8 +130,10 @@ examples: pmic@66 { compatible = "maxim,max77705"; reg = <0x66>; + #interrupt-cells = <1>; interrupt-parent = <&pm8998_gpios>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; pinctrl-0 = <&chg_int_default>; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/mfd/nxp,pf1550.yaml b/Documentation/devicetree/bindings/mfd/nxp,pf1550.yaml new file mode 100644 index 000000000000..e50dc44252c6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/nxp,pf1550.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/nxp,pf1550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PF1550 Power Management IC + +maintainers: + - Samuel Kayode <samuel.kayode@savoirfairelinux.com> + +description: + PF1550 PMIC provides battery charging and power supply for low power IoT and + wearable applications. This device consists of an i2c controlled MFD that + includes regulators, battery charging and an onkey/power button. + +$ref: /schemas/power/supply/power-supply.yaml + +properties: + compatible: + const: nxp,pf1550 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: true + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^(ldo[1-3]|sw[1-3]|vrefddr)$": + type: object + $ref: /schemas/regulator/regulator.yaml + description: + regulator configuration for ldo1-3, buck converters(sw1-3) + and DDR termination reference voltage (vrefddr) + unevaluatedProperties: false + + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid value + for: + constant-charge-voltage-max-microvolt. + + nxp,thermal-regulation-celsius: + description: + Temperature threshold for thermal regulation of charger in celsius. + enum: [ 80, 95, 110, 125 ] + + nxp,min-system-microvolt: + description: + System specific lower limit voltage. + enum: [ 3500000, 3700000, 4300000 ] + + nxp,disable-key-power: + type: boolean + description: + Disable power-down using a long key-press. The onkey driver will remove + support for the KEY_POWER key press when triggered using a long press of + the onkey. + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + + battery: battery-cell { + compatible = "simple-battery"; + constant-charge-voltage-max-microvolt = <4400000>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "nxp,pf1550"; + reg = <0x8>; + + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + monitored-battery = <&battery>; + nxp,min-system-microvolt = <4300000>; + nxp,thermal-regulation-celsius = <80>; + + regulators { + sw1_reg: sw1 { + regulator-name = "sw1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1387500>; + regulator-always-on; + regulator-ramp-delay = <6250>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1270000>; + }; + }; + + sw2_reg: sw2 { + regulator-name = "sw2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1387500>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + sw3_reg: sw3 { + regulator-name = "sw3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vldo1_reg: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vldo2_reg: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vldo3_reg: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 078a6886f8b1..65c80e3b4500 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -43,6 +43,7 @@ properties: - qcom,pm7250b - qcom,pm7550ba - qcom,pm7325 + - qcom,pm7550 - qcom,pm8004 - qcom,pm8005 - qcom,pm8009 @@ -84,6 +85,7 @@ properties: - qcom,pmi8994 - qcom,pmi8998 - qcom,pmih0108 + - qcom,pmiv0104 - qcom,pmk8002 - qcom,pmk8350 - qcom,pmk8550 diff --git a/Documentation/devicetree/bindings/mfd/renesas,r2a11302ft.yaml b/Documentation/devicetree/bindings/mfd/renesas,r2a11302ft.yaml new file mode 100644 index 000000000000..7b96619ebd8c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/renesas,r2a11302ft.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/renesas,r2a11302ft.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R2A11302FT Power Supply ICs for R-Car + +maintainers: + - Wolfram Sang <wsa+renesas@sang-engineering.com> + +description: | + The Renesas R2A11302FT PMIC is used with Renesas R-Car Gen1/Gen2 + based SoCs. + + FIXME: The binding is incomplete and resembles the information gathered + so far. + +properties: + compatible: + const: renesas,r2a11302ft + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 6000000 + + spi-cpol: true + + spi-cpha: true + +required: + - compatible + - reg + - spi-cpol + - spi-cpha + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml index ee0be32ac020..4f829fe75d41 100644 --- a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml @@ -32,6 +32,17 @@ properties: Specifying the power good GPIOs. maxItems: 1 + enable-gpios: + maxItems: 1 + + vcom-en-gpios: + maxItems: 1 + + vin-supply: + description: + Supply for the whole chip. Some vendor kernels and devicetrees + declare this as a non-existing GPIO named "pwrall". + regulators: type: object diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml index b2cfa4120b8a..ce5e845ab5c5 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -444,7 +444,6 @@ properties: additionalProperties: false - regulator-external: description: Node describing the AB8500 external regulators. This concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3 diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 657c38175fba..55efb83b1495 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -85,6 +85,7 @@ select: - mediatek,mt2701-pctl-a-syscfg - mediatek,mt2712-pctl-a-syscfg - mediatek,mt6397-pctl-pmic-syscfg + - mediatek,mt7981-topmisc - mediatek,mt7988-topmisc - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg @@ -133,111 +134,126 @@ select: properties: compatible: - items: - - enum: - - airoha,en7581-pbus-csr - - al,alpine-sysfabric-service - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller - - altr,l3regs - - altr,sdr-ctl - - amd,pensando-elba-syscon - - amlogic,meson-mx-assist - - amlogic,meson-mx-bootrom - - amlogic,meson8-analog-top - - amlogic,meson8b-analog-top - - amlogic,meson8-pmu - - amlogic,meson8b-pmu - - apm,merlin-poweroff-mailbox - - apm,mustang-poweroff-mailbox - - apm,xgene-csw - - apm,xgene-efuse - - apm,xgene-mcb - - apm,xgene-rb - - apm,xgene-scu - - atmel,sama5d2-sfrbu - - atmel,sama5d3-nfc-io - - atmel,sama5d3-sfrbu - - atmel,sama5d4-sfrbu - - axis,artpec6-syscon - - brcm,cru-clkset - - brcm,sr-cdru - - brcm,sr-mhb - - cirrus,ep7209-syscon1 - - cirrus,ep7209-syscon2 - - cirrus,ep7209-syscon3 - - cnxt,cx92755-uc - - freecom,fsg-cs2-system-controller - - fsl,imx93-aonmix-ns-syscfg - - fsl,imx93-wakeupmix-syscfg - - fsl,ls1088a-reset - - fsl,vf610-anatop - - fsl,vf610-mscm-cpucfg - - hisilicon,dsa-subctrl - - hisilicon,hi6220-sramctrl - - hisilicon,hip04-ppe - - hisilicon,pcie-sas-subctrl - - hisilicon,peri-subctrl - - hpe,gxp-sysreg - - loongson,ls1b-syscon - - loongson,ls1c-syscon - - lsi,axxia-syscon - - marvell,armada-3700-cpu-misc - - marvell,armada-3700-nb-pm - - marvell,armada-3700-avs - - marvell,armada-3700-usb2-host-device-misc - - marvell,armada-3700-usb2-host-misc - - marvell,dove-global-config - - mediatek,mt2701-pctl-a-syscfg - - mediatek,mt2712-pctl-a-syscfg - - mediatek,mt6397-pctl-pmic-syscfg - - mediatek,mt7988-topmisc - - mediatek,mt8135-pctl-a-syscfg - - mediatek,mt8135-pctl-b-syscfg - - mediatek,mt8173-pctl-a-syscfg - - mediatek,mt8365-infracfg-nao - - mediatek,mt8365-syscfg - - microchip,lan966x-cpu-syscon - - microchip,mpfs-control-scb - - microchip,mpfs-sysreg-scb - - microchip,sam9x60-sfr - - microchip,sama7d65-ddr3phy - - microchip,sama7d65-sfrbu - - microchip,sama7g5-ddr3phy - - mscc,ocelot-cpu-syscon - - mstar,msc313-pmsleep - - nuvoton,ma35d1-sys - - nuvoton,wpcm450-shm - - qcom,apq8064-mmss-sfpb - - qcom,apq8064-sps-sic - - rockchip,px30-qos - - rockchip,rk3036-qos - - rockchip,rk3066-qos - - rockchip,rk3128-qos - - rockchip,rk3228-qos - - rockchip,rk3288-qos - - rockchip,rk3368-qos - - rockchip,rk3399-qos - - rockchip,rk3528-qos - - rockchip,rk3562-qos - - rockchip,rk3568-qos - - rockchip,rk3576-qos - - rockchip,rk3588-qos - - rockchip,rv1126-qos - - st,spear1340-misc - - stericsson,nomadik-pmu - - starfive,jh7100-sysmain - - ti,am62-opp-efuse-table - - ti,am62-usb-phy-ctrl - - ti,am625-dss-oldi-io-ctrl - - ti,am62p-cpsw-mac-efuse - - ti,am654-dss-oldi-io-ctrl - - ti,j784s4-acspcie-proxy-ctrl - - ti,j784s4-pcie-ctrl - - ti,keystone-pllctrl - - const: syscon + oneOf: + - items: + - enum: + - airoha,en7581-pbus-csr + - al,alpine-sysfabric-service + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - altr,l3regs + - altr,sdr-ctl + - amd,pensando-elba-syscon + - amlogic,meson-mx-assist + - amlogic,meson-mx-bootrom + - amlogic,meson8-analog-top + - amlogic,meson8b-analog-top + - amlogic,meson8-pmu + - amlogic,meson8b-pmu + - apm,merlin-poweroff-mailbox + - apm,mustang-poweroff-mailbox + - apm,xgene-csw + - apm,xgene-efuse + - apm,xgene-mcb + - apm,xgene-rb + - apm,xgene-scu + - atmel,sama5d2-sfrbu + - atmel,sama5d3-nfc-io + - atmel,sama5d3-sfrbu + - atmel,sama5d4-sfrbu + - axis,artpec6-syscon + - brcm,cru-clkset + - brcm,sr-cdru + - brcm,sr-mhb + - cirrus,ep7209-syscon1 + - cirrus,ep7209-syscon2 + - cirrus,ep7209-syscon3 + - cnxt,cx92755-uc + - freecom,fsg-cs2-system-controller + - fsl,imx93-aonmix-ns-syscfg + - fsl,imx93-wakeupmix-syscfg + - fsl,ls1088a-reset + - fsl,vf610-anatop + - fsl,vf610-mscm-cpucfg + - hisilicon,dsa-subctrl + - hisilicon,hi6220-sramctrl + - hisilicon,hip04-ppe + - hisilicon,pcie-sas-subctrl + - hisilicon,peri-subctrl + - hpe,gxp-sysreg + - loongson,ls1b-syscon + - loongson,ls1c-syscon + - lsi,axxia-syscon + - marvell,armada-3700-cpu-misc + - marvell,armada-3700-nb-pm + - marvell,armada-3700-avs + - marvell,armada-3700-usb2-host-device-misc + - marvell,armada-3700-usb2-host-misc + - marvell,dove-global-config + - mediatek,mt2701-pctl-a-syscfg + - mediatek,mt2712-pctl-a-syscfg + - mediatek,mt6397-pctl-pmic-syscfg + - mediatek,mt7988-topmisc + - mediatek,mt8135-pctl-a-syscfg + - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8173-pctl-a-syscfg + - mediatek,mt8365-infracfg-nao + - mediatek,mt8365-syscfg + - microchip,lan966x-cpu-syscon + - microchip,mpfs-control-scb + - microchip,mpfs-sysreg-scb + - microchip,sam9x60-sfr + - microchip,sama7d65-ddr3phy + - microchip,sama7d65-sfrbu + - microchip,sama7g5-ddr3phy + - mscc,ocelot-cpu-syscon + - mstar,msc313-pmsleep + - nuvoton,ma35d1-sys + - nuvoton,wpcm450-shm + - qcom,apq8064-mmss-sfpb + - qcom,apq8064-sps-sic + - rockchip,px30-qos + - rockchip,rk3036-qos + - rockchip,rk3066-qos + - rockchip,rk3128-qos + - rockchip,rk3228-qos + - rockchip,rk3288-qos + - rockchip,rk3368-qos + - rockchip,rk3399-qos + - rockchip,rk3528-qos + - rockchip,rk3562-qos + - rockchip,rk3568-qos + - rockchip,rk3576-qos + - rockchip,rk3588-qos + - rockchip,rv1126-qos + - st,spear1340-misc + - stericsson,nomadik-pmu + - starfive,jh7100-sysmain + - ti,am62-opp-efuse-table + - ti,am62-usb-phy-ctrl + - ti,am625-dss-oldi-io-ctrl + - ti,am62p-cpsw-mac-efuse + - ti,am654-dss-oldi-io-ctrl + - ti,j784s4-acspcie-proxy-ctrl + - ti,j784s4-pcie-ctrl + - ti,keystone-pllctrl + - const: syscon + - items: + - enum: + - microchip,sama7g5-sfrbu + - microchip,sama7d65-sfrbu + - const: atmel,sama5d2-sfrbu + - const: syscon + - items: + - const: microchip,pic64gx-control-scb + - const: microchip,mpfs-control-scb + - const: syscon + - items: + - const: microchip,pic64gx-sysreg-scb + - const: microchip,mpfs-sysreg-scb + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml index a2668fc30a7b..f1a76f88fc0c 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml @@ -166,9 +166,6 @@ patternProperties: required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - gpio-controller - '#gpio-cells' - regulators diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml index 776b04e182cb..9cc3e4721612 100644 --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -55,6 +55,15 @@ allOf: gpadc: false + pwrbutton: + properties: + compatible: + const: ti,twl4030-pwrbutton + interrupts: + items: + - items: + const: 8 + usb-comparator: false - if: @@ -95,7 +104,14 @@ allOf: compatible: const: ti,twl6030-gpadc - pwrbutton: false + pwrbutton: + properties: + compatible: + const: ti,twl6030-pwrbutton + interrupts: + items: + - items: + const: 0 madc: false @@ -146,7 +162,14 @@ allOf: compatible: const: ti,twl6032-gpadc - pwrbutton: false + pwrbutton: + properties: + compatible: + const: ti,twl6030-pwrbutton + interrupts: + items: + - items: + const: 0 madc: false @@ -226,11 +249,11 @@ properties: properties: compatible: - const: ti,twl4030-pwrbutton + enum: + - ti,twl4030-pwrbutton + - ti,twl6030-pwrbutton interrupts: - items: - - items: - const: 8 + maxItems: 1 watchdog: type: object @@ -400,7 +423,7 @@ properties: - '#pwm-cells' patternProperties: - "^regulator-": + '^regulator-': type: object unevaluatedProperties: false $ref: /schemas/regulator/regulator.yaml @@ -429,7 +452,7 @@ required: - reg - interrupts - interrupt-controller - - "#interrupt-cells" + - '#interrupt-cells' examples: - | @@ -459,6 +482,11 @@ examples: #io-channel-cells = <1>; }; + pwrbutton { + compatible = "ti,twl6030-pwrbutton"; + interrupts = <0>; + }; + rtc { compatible = "ti,twl4030-rtc"; interrupts = <8>; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml index 493655a38b37..0936bfef8c75 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -21,9 +21,11 @@ properties: - items: - enum: - brcm,bcm2712-sdhci + - brcm,bcm72116-sdhci - brcm,bcm74165b0-sdhci - brcm,bcm7445-sdhci - brcm,bcm7425-sdhci + - brcm,bcm74371-sdhci - const: brcm,sdhci-brcmstb reg: diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt deleted file mode 100644 index 516fb0143d4c..000000000000 --- a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt +++ /dev/null @@ -1,32 +0,0 @@ -* TI Highspeed MMC host controller for DaVinci - -The Highspeed MMC Host Controller on TI DaVinci family -provides an interface for MMC, SD and SDIO types of memory cards. - -This file documents the properties used by the davinci_mmc driver. - -Required properties: -- compatible: - Should be "ti,da830-mmc": for da830, da850, dm365 - Should be "ti,dm355-mmc": for dm355, dm644x - -Optional properties: -- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1> -- max-frequency: Maximum operating clock frequency, default 25MHz. -- dmas: List of DMA specifiers with the controller specific format - as described in the generic DMA client binding. A tx and rx - specifier is required. -- dma-names: RX and TX DMA request names. These strings correspond - 1:1 with the DMA specifiers listed in dmas. - -Example: -mmc0: mmc@1c40000 { - compatible = "ti,da830-mmc", - reg = <0x40000 0x1000>; - interrupts = <16>; - bus-width = <4>; - max-frequency = <50000000>; - dmas = <&edma 16 - &edma 17>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index bf273115235b..acb9fb9a92cd 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -38,6 +38,7 @@ properties: - rockchip,rk3328-dw-mshc - rockchip,rk3368-dw-mshc - rockchip,rk3399-dw-mshc + - rockchip,rk3506-dw-mshc - rockchip,rk3528-dw-mshc - rockchip,rk3562-dw-mshc - rockchip,rk3568-dw-mshc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index 676a74695389..242a3c6b925c 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -50,8 +50,7 @@ properties: - const: clk_ahb - const: clk_xin - dma-coherent: - type: boolean + dma-coherent: true # PHY output tap delays: # Used to delay the data valid window and align it to the sampling clock. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt deleted file mode 100644 index 627ee89c125b..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt +++ /dev/null @@ -1,30 +0,0 @@ -* SOCIONEXT Milbeaut SDHCI controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci_milbeaut driver. - -Required properties: -- compatible: "socionext,milbeaut-m10v-sdhci-3.0" -- clocks: Must contain an entry for each entry in clock-names. It is a - list of phandles and clock-specifier pairs. - See ../clocks/clock-bindings.txt for details. -- clock-names: Should contain the following two entries: - "iface" - clock used for sdhci interface - "core" - core clock for sdhci controller - -Optional properties: -- fujitsu,cmd-dat-delay-select: boolean property indicating that this host - requires the CMD_DAT_DELAY control to be enabled. - -Example: - sdhci3: mmc@1b010000 { - compatible = "socionext,milbeaut-m10v-sdhci-3.0"; - reg = <0x1b010000 0x10000>; - interrupts = <0 265 0x4>; - voltage-ranges = <3300 3300>; - bus-width = <4>; - clocks = <&clk 7>, <&ahb_clk>; - clock-names = "core", "iface"; - cap-sdio-irq; - fujitsu,cmd-dat-delay-select; - }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 594bd174ff21..938be8228d66 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -42,6 +42,7 @@ properties: - qcom,ipq5424-sdhci - qcom,ipq6018-sdhci - qcom,ipq9574-sdhci + - qcom,kaanapali-sdhci - qcom,milos-sdhci - qcom,qcm2290-sdhci - qcom,qcs404-sdhci @@ -70,6 +71,7 @@ properties: - qcom,sm8450-sdhci - qcom,sm8550-sdhci - qcom,sm8650-sdhci + - qcom,sm8750-sdhci - qcom,x1e80100-sdhci - const: qcom,sdhci-msm-v5 # for sdcc version 5.0 diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml index f882219a0a26..7e7c55dc2440 100644 --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -30,6 +30,7 @@ properties: - sophgo,sg2002-dwcmshc - sophgo,sg2042-dwcmshc - thead,th1520-dwcmshc + - eswin,eic7700-dwcmshc reg: maxItems: 1 @@ -52,17 +53,30 @@ properties: maxItems: 5 reset-names: - items: - - const: core - - const: bus - - const: axi - - const: block - - const: timer + maxItems: 5 rockchip,txclk-tapnum: description: Specify the number of delay for tx sampling. $ref: /schemas/types.yaml#/definitions/uint8 + eswin,hsp-sp-csr: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to HSP(High-Speed Peripheral) device + - description: Offset of the stability status register for internal + clock. + - description: Offset of the stability register for host regulator + voltage. + description: + HSP CSR is to control and get status of different high-speed peripherals + (such as Ethernet, USB, SATA, etc.) via register, which can tune + board-level's parameters of PHY, etc. + + eswin,drive-impedance-ohms: + description: Specifies the drive impedance in Ohm. + enum: [33, 40, 50, 66, 100] + required: - compatible - reg @@ -114,6 +128,37 @@ allOf: properties: compatible: contains: + const: eswin,eic7700-dwcmshc + then: + properties: + resets: + minItems: 4 + maxItems: 4 + reset-names: + items: + - const: axi + - const: phy + - const: prstn + - const: txrx + required: + - eswin,hsp-sp-csr + - eswin,drive-impedance-ohms + else: + properties: + resets: + maxItems: 5 + reset-names: + items: + - const: core + - const: bus + - const: axi + - const: block + - const: timer + + - if: + properties: + compatible: + contains: const: rockchip,rk3576-dwcmshc then: diff --git a/Documentation/devicetree/bindings/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml b/Documentation/devicetree/bindings/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml new file mode 100644 index 000000000000..2ba53626a959 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SOCIONEXT Milbeaut SDHCI controller + +maintainers: + - Taichi Sugaya <sugaya.taichi@socionext.com> + - Takao Orito <orito.takao@socionext.com> + +description: + The SOCIONEXT Milbeaut SDHCI controller is a specialized SD Host + Controller found in some of Socionext's Milbeaut image processing SoCs. + It features a dedicated "bridge controller." This bridge controller + implements special functions like reset control, clock management for + various SDR modes (SDR12, SDR25, SDR50) and physical pin property settings. + +allOf: + - $ref: sdhci-common.yaml# + +properties: + compatible: + const: socionext,milbeaut-m10v-sdhci-3.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + fujitsu,cmd-dat-delay-select: + description: + Its presence indicates that the controller requires a specific command + and data line delay selection mechanism for proper operation, particularly + when dealing with high-speed SD/eMMC modes. + type: boolean + + voltage-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: minimum slot voltage (mV). + - description: maximum slot voltage (mV). + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mmc@1b010000 { + compatible = "socionext,milbeaut-m10v-sdhci-3.0"; + reg = <0x1b010000 0x10000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + voltage-ranges = <3300 3300>; + bus-width = <4>; + clocks = <&clk 7>, <&ahb_clk>; + clock-names = "core", "iface"; + cap-sdio-irq; + fujitsu,cmd-dat-delay-select; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/ti,da830-mmc.yaml b/Documentation/devicetree/bindings/mmc/ti,da830-mmc.yaml new file mode 100644 index 000000000000..36b33dde086b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti,da830-mmc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/ti,da830-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Highspeed MMC host controller for DaVinci + +description: + The Highspeed MMC Host Controller on TI DaVinci family + provides an interface for MMC, SD and SDIO types of memory cards. + +allOf: + - $ref: mmc-controller.yaml + +maintainers: + - Kishon Vijay Abraham I <kishon@kernel.org> + +properties: + compatible: + enum: + - ti,da830-mmc + - ti,dm355-mmc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 2 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + mmc@1c40000 { + compatible = "ti,da830-mmc"; + reg = <0x40000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + max-frequency = <50000000>; + dmas = <&edma 16>, <&edma 17>; + dma-names = "rx", "tx"; + }; +... diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 054b6b8bf9b9..9d061e2216cb 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A10 NAND Controller -allOf: - - $ref: nand-controller.yaml - maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> @@ -18,6 +15,8 @@ properties: enum: - allwinner,sun4i-a10-nand - allwinner,sun8i-a23-nand-controller + - allwinner,sun50i-h616-nand-controller + reg: maxItems: 1 @@ -25,14 +24,20 @@ properties: maxItems: 1 clocks: + minItems: 2 items: - description: Bus Clock - description: Module Clock + - description: ECC Clock + - description: MBus Clock clock-names: + minItems: 2 items: - const: ahb - const: mod + - const: ecc + - const: mbus resets: maxItems: 1 @@ -85,6 +90,36 @@ required: unevaluatedProperties: false +allOf: + - $ref: nand-controller.yaml + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-nand + - allwinner,sun8i-a23-nand-controller + then: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-h616-nand-controller + then: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml index 284f0f882c32..fa2aa29be794 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml @@ -88,7 +88,6 @@ patternProperties: amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"] amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"] - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml index 1ecea848e8b9..bc89cbf8193a 100644 --- a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml @@ -145,7 +145,6 @@ allOf: clock-names: minItems: 1 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml index 1b375dee83b0..a9ec3ca002c7 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml @@ -69,6 +69,16 @@ properties: minItems: 1 maxItems: 8 + clocks: + description: | + Chips may need clocks to be enabled for themselves or for transparent + bridges. + + power-domains: + description: | + Chips may need power domains to be enabled for themselves or for + transparent bridges. + bank-width: description: Width (in bytes) of the bank. Equal to the device width times the number of interleaved chips. diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml index 571ad9e13ecf..78340bbe4df6 100644 --- a/Documentation/devicetree/bindings/mux/mux-controller.yaml +++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml @@ -20,7 +20,6 @@ description: | space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer, 0-7 for an 8-way multiplexer, etc. - Mux controller nodes -------------------- diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index fc62fb2a68ac..323a669fa982 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -201,7 +201,6 @@ allOf: - clocks - resets - mdio@2: $ref: mdio.yaml# unevaluatedProperties: false @@ -251,7 +250,6 @@ allOf: maxItems: 1 power-domains: false - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml index 0e3fb4e42e3f..a1119c47e29b 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -31,7 +31,6 @@ properties: - description: RX and TX rings interrupt line - description: Wake-on-LAN interrupt line - clocks: minItems: 1 items: diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml index 3f27746d9a56..d544f785e6b9 100644 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml @@ -29,7 +29,6 @@ properties: maxItems: 1 description: core clock driving the MDIO block - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml index 44fd23a5fa2b..a930358f6a66 100644 --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml @@ -100,7 +100,6 @@ examples: }; }; - ethernet@60000000 { compatible = "cortina,gemini-ethernet"; reg = <0x60000000 0x4000>, /* Global registers, queue */ diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index b3b7e1a1b127..6bb68f7dbc7f 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -35,14 +35,14 @@ allOf: then: properties: $nodename: - pattern: "switch[0-3]@[0-3]+$" + pattern: 'switch[0-3]@[0-3]+$' else: properties: $nodename: - pattern: "^(ethernet-)?switch(@.*)?$" + pattern: '^(ethernet-)?switch(@.*)?$' patternProperties: - "^(ethernet-)?ports$": + '^(ethernet-)?ports$': type: object unevaluatedProperties: false @@ -53,13 +53,13 @@ patternProperties: const: 0 patternProperties: - "^(ethernet-)?port@[0-9a-f]+$": + '^(ethernet-)?port@[0-9a-f]+$': type: object description: Ethernet switch ports required: - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' oneOf: - required: @@ -75,9 +75,9 @@ $defs: $ref: '#' patternProperties: - "^(ethernet-)?ports$": + '^(ethernet-)?ports$': patternProperties: - "^(ethernet-)?port@[0-9a-f]+$": + '^(ethernet-)?port@[0-9a-f]+$': description: Ethernet switch ports $ref: ethernet-switch-port.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml index f92f284aa05b..0d8909770ccb 100644 --- a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml +++ b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml @@ -167,8 +167,6 @@ allOf: - description: Receive interrupt - description: Error interrupt - - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml index 282987074ee4..23947ba6aeaf 100644 --- a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml +++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml @@ -14,7 +14,6 @@ description: |+ of a mux producer device. The mux producer can be of any type like mmio mux producer, gpio mux producer or generic register based mux producer. - allOf: - $ref: /schemas/net/mdio-mux.yaml# diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index b4a79912d473..c7f5f2ef7452 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -24,7 +24,6 @@ description: iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU bindings. - - | -------- --------- | | | | diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index d14ca81f70e0..8b5da602a2e8 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -156,7 +156,6 @@ patternProperties: CPSW MDIO bus. $ref: ti,davinci-mdio.yaml# - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index 75c9489f319b..9de5fdefcbcc 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -50,7 +50,6 @@ properties: Points to the node of the regulator that powers/enable the wl12xx/wl18xx chip. This is required when connected via SPI. - ref-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. diff --git a/Documentation/devicetree/bindings/npu/arm,ethos.yaml b/Documentation/devicetree/bindings/npu/arm,ethos.yaml new file mode 100644 index 000000000000..716c4997f976 --- /dev/null +++ b/Documentation/devicetree/bindings/npu/arm,ethos.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/npu/arm,ethos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ethos U65/U85 + +maintainers: + - Rob Herring <robh@kernel.org> + +description: > + The Arm Ethos-U NPUs are designed for IoT inference applications. The NPUs + can accelerate 8-bit and 16-bit integer quantized networks: + + Transformer networks (U85 only) + Convolutional Neural Networks (CNN) + Recurrent Neural Networks (RNN) + + Further documentation is available here: + + U65 TRM: https://developer.arm.com/documentation/102023/ + U85 TRM: https://developer.arm.com/documentation/102685/ + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx93-npu + - const: arm,ethos-u65 + - items: + - {} + - const: arm,ethos-u85 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: apb + + power-domains: + maxItems: 1 + + sram: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx93-clock.h> + + npu@4a900000 { + compatible = "fsl,imx93-npu", "arm,ethos-u65"; + reg = <0x4a900000 0x1000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mlmix>; + clocks = <&clk IMX93_CLK_ML>, <&clk IMX93_CLK_ML_APB>; + clock-names = "core", "apb"; + sram = <&sram>; + }; +... diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt deleted file mode 100644 index 0415265c215a..000000000000 --- a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt +++ /dev/null @@ -1,17 +0,0 @@ -Broadcom OTP memory controller - -Required Properties: -- compatible: "brcm,ocotp" for the first generation Broadcom OTPC which is used - in Cygnus and supports 32 bit read/write. Use "brcm,ocotp-v2" for the second - generation Broadcom OTPC which is used in SoC's such as Stingray and supports - 64-bit read/write. -- reg: Base address of the OTP controller. -- brcm,ocotp-size: Amount of memory available, in 32 bit words - -Example: - -otp: otp@301c800 { - compatible = "brcm,ocotp"; - reg = <0x0301c800 0x2c>; - brcm,ocotp-size = <2048>; -}; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.yaml b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.yaml new file mode 100644 index 000000000000..ffad28417488 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/brcm,ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom OTP memory controller + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +properties: + compatible: + enum: + - brcm,ocotp + - brcm,ocotp-v2 + + reg: + maxItems: 1 + + brcm,ocotp-size: + description: Amount of memory available, in 32-bit words + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - brcm,ocotp-size + +additionalProperties: false + +examples: + - | + otp@301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; + }; diff --git a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml index 5d3f48a001b7..f516db47ab20 100644 --- a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml +++ b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml @@ -93,7 +93,6 @@ allOf: reg-names: minItems: 3 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml index 79a21ba0f9fd..d67cb7a850a3 100644 --- a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml @@ -20,9 +20,10 @@ allOf: select: properties: compatible: - enum: - - amlogic,axg-pcie - - amlogic,g12a-pcie + contains: + enum: + - amlogic,axg-pcie + - amlogic,g12a-pcie required: - compatible @@ -36,13 +37,13 @@ properties: reg: items: - - description: External local bus interface registers + - description: Data Bus Interface registers - description: Meson designed configuration registers - description: PCIe configuration space reg-names: items: - - const: elbi + - const: dbi - const: cfg - const: config @@ -51,15 +52,15 @@ properties: clocks: items: + - description: PCIe PHY clock - description: PCIe GEN 100M PLL clock - description: PCIe RC clock gate - - description: PCIe PHY clock clock-names: items: + - const: general - const: pclk - const: port - - const: general phys: maxItems: 1 @@ -88,7 +89,7 @@ required: - reg - reg-names - interrupts - - clock + - clocks - clock-names - "#address-cells" - "#size-cells" @@ -113,10 +114,10 @@ examples: pcie: pcie@f9800000 { compatible = "amlogic,axg-pcie", "snps,dw-pcie"; reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; - clocks = <&pclk>, <&clk_port>, <&clk_phy>; - clock-names = "pclk", "port", "general"; + clocks = <&clk_phy>, <&pclk>, <&clk_port>; + clock-names = "general", "pclk", "port"; resets = <&reset_pcie_port>, <&reset_pcie_apb>; reset-names = "port", "apb"; phys = <&pcie_phy>; diff --git a/Documentation/devicetree/bindings/pci/cix,sky1-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cix,sky1-pcie-host.yaml new file mode 100644 index 000000000000..b910a42e0843 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cix,sky1-pcie-host.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/cix,sky1-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CIX Sky1 PCIe Root Complex + +maintainers: + - Hans Zhang <hans.zhang@cixtech.com> + +description: + PCIe root complex controller based on the Cadence PCIe core. + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + const: cix,sky1-pcie-host + + reg: + items: + - description: PCIe controller registers. + - description: ECAM registers. + - description: Remote CIX System Unit strap registers. + - description: Remote CIX System Unit status registers. + - description: Region for sending messages registers. + + reg-names: + items: + - const: reg + - const: cfg + - const: rcsu_strap + - const: rcsu_status + - const: msg + + ranges: + maxItems: 3 + +required: + - compatible + - ranges + - bus-range + - device_type + - interrupt-map + - interrupt-map-mask + - msi-map + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@a010000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a010000 0x00 0x10000>, + <0x00 0x2c000000 0x00 0x4000000>, + <0x00 0x0a000300 0x00 0x100>, + <0x00 0x0a000400 0x00 0x100>, + <0x00 0x60000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x00 0x60100000 0x00 0x60100000 0x00 0x00100000>, + <0x02000000 0x00 0x60200000 0x00 0x60200000 0x00 0x1fe00000>, + <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0xc0 0xff>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0xc000 &gic_its 0xc000 0x4000>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml index 1988465e73a1..e5bba63aa947 100644 --- a/Documentation/devicetree/bindings/pci/loongson.yaml +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -32,7 +32,6 @@ properties: minItems: 1 maxItems: 3 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml new file mode 100644 index 000000000000..e33bcc216e30 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-mt7623.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe controller on MediaTek SoCs + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +properties: + compatible: + enum: + - mediatek,mt2701-pcie + - mediatek,mt7623-pcie + + reg: + minItems: 4 + maxItems: 4 + + reg-names: + items: + - const: subsys + - const: port0 + - const: port1 + - const: port2 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: free_ck + - const: sys_ck0 + - const: sys_ck1 + - const: sys_ck2 + + resets: + minItems: 3 + maxItems: 3 + + reset-names: + items: + - const: pcie-rst0 + - const: pcie-rst1 + - const: pcie-rst2 + + phys: + minItems: 3 + maxItems: 3 + + phy-names: + items: + - const: pcie-phy0 + - const: pcie-phy1 + - const: pcie-phy2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - resets + - reset-names + - phys + - phy-names + - power-domains + - pcie@0,0 + - pcie@1,0 + - pcie@2,0 + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +unevaluatedProperties: false + +examples: + # MT7623 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/reset/mt2701-resets.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mt2701-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, + <&pcie2_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000>, /* I/O space */ + <0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt deleted file mode 100644 index 684227522267..000000000000 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ /dev/null @@ -1,289 +0,0 @@ -MediaTek Gen2 PCIe controller - -Required properties: -- compatible: Should contain one of the following strings: - "mediatek,mt2701-pcie" - "mediatek,mt2712-pcie" - "mediatek,mt7622-pcie" - "mediatek,mt7623-pcie" - "mediatek,mt7629-pcie" - "airoha,en7523-pcie" -- device_type: Must be "pci" -- reg: Base addresses and lengths of the root ports. -- reg-names: Names of the above areas to use during resource lookup. -- #address-cells: Address representation for root ports (must be 3) -- #size-cells: Size representation for root ports (must be 2) -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: - Mandatory entries: - - sys_ckN :transaction layer and data link layer clock - Required entries for MT2701/MT7623: - - free_ck :for reference clock of PCIe subsys - Required entries for MT2712/MT7622: - - ahb_ckN :AHB slave interface operating clock for CSR access and RC - initiated MMIO access - Required entries for MT7622: - - axi_ckN :application layer MMIO channel operating clock - - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when - pcie_mac_ck/pcie_pipe_ck is turned off - - obff_ckN :OBFF functional block operating clock - - pipe_ckN :LTSSM and PHY/MAC layer operating clock - where N starting from 0 to one less than the number of root ports. -- phys: List of PHY specifiers (used by generic PHY framework). -- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the - number of PHYs as specified in *phys* property. -- power-domains: A phandle and power domain specifier pair to the power domain - which is responsible for collapsing and restoring power to the peripheral. -- bus-range: Range of bus numbers associated with this controller. -- ranges: Ranges for the PCI memory and I/O regions. - -Required properties for MT7623/MT2701: -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the - number of root ports. - -Required properties for MT2712/MT7622/MT7629: --interrupts: A list of interrupt outputs of the controller, must have one - entry for each PCIe port -- interrupt-names: Must include the following entries: - - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received -- linux,pci-domain: PCI domain ID. Should be unique for each host controller - -In addition, the device tree node must have sub-nodes describing each -PCIe port interface, having the following mandatory properties: - -Required properties: -- device_type: Must be "pci" -- reg: Only the first four bytes are used to refer to the correct bus number - and device number. -- #address-cells: Must be 3 -- #size-cells: Must be 2 -- #interrupt-cells: Must be 1 -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- ranges: Sub-ranges distributed from the PCIe controller node. An empty - property is sufficient. - -Examples for MT7623: - - hifsys: syscon@1a000000 { - compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pcie: pcie@1a140000 { - compatible = "mediatek,mt7623-pcie"; - device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ - <0 0x1a142000 0 0x1000>, /* Port0 registers */ - <0 0x1a143000 0 0x1000>, /* Port1 registers */ - <0 0x1a144000 0 0x1000>; /* Port2 registers */ - reg-names = "subsys", "port0", "port1", "port2"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 0>; - interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, - <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, - <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <&hifsys CLK_HIFSYS_PCIE0>, - <&hifsys CLK_HIFSYS_PCIE1>, - <&hifsys CLK_HIFSYS_PCIE2>; - clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; - resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, - <&hifsys MT2701_HIFSYS_PCIE1_RST>, - <&hifsys MT2701_HIFSYS_PCIE2_RST>; - reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, - <&pcie2_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; - bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ - 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ - - pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - - pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - - pcie@2,0 { - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - }; - -Examples for MT2712: - - pcie1: pcie@112ff000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; - reg = <0 0x112ff000 0 0x1000>; - reg-names = "port1"; - linux,pci-domain = <1>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pcie_irq"; - clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck1", "ahb_ck1"; - phys = <&u3port1 PHY_TYPE_PCIE>; - phy-names = "pcie-phy1"; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie0: pcie@11700000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; - reg = <0 0x11700000 0 0x1000>; - reg-names = "port0"; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pcie_irq"; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&pericfg CLK_PERI_PCIE0>; - clock-names = "sys_ck0", "ahb_ck0"; - phys = <&u3port0 PHY_TYPE_PCIE>; - phy-names = "pcie-phy0"; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - -Examples for MT7622: - - pcie0: pcie@1a143000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; - reg = <0 0x1a143000 0 0x1000>; - reg-names = "port0"; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>; - clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", - "axi_ck0", "obff_ck0", "pipe_ck0"; - - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie1: pcie@1a145000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; - reg = <0 0x1a145000 0 0x1000>; - reg-names = "port1"; - linux,pci-domain = <1>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, - /* designer has connect RC1 with p0_ahb clock */ - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", - "axi_ck1", "obff_ck1", "pipe_ck1"; - - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml new file mode 100644 index 000000000000..0b8c78ec4f91 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml @@ -0,0 +1,438 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe controller on MediaTek SoCs + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +properties: + compatible: + oneOf: + - enum: + - airoha,an7583-pcie + - mediatek,mt2712-pcie + - mediatek,mt7622-pcie + - mediatek,mt7629-pcie + - items: + - const: airoha,en7523-pcie + - const: mediatek,mt7622-pcie + + reg: + maxItems: 1 + + reg-names: + enum: [ port0, port1 ] + + clocks: + minItems: 1 + maxItems: 6 + + clock-names: + minItems: 1 + items: + - enum: [ sys_ck0, sys_ck1 ] + - enum: [ ahb_ck0, ahb_ck1 ] + - enum: [ aux_ck0, aux_ck1 ] + - enum: [ axi_ck0, axi_ck1 ] + - enum: [ obff_ck0, obff_ck1 ] + - enum: [ pipe_ck0, pipe_ck1 ] + + resets: + maxItems: 1 + + reset-names: + const: pcie-rst1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: pcie_irq + + phys: + maxItems: 1 + + phy-names: + enum: [ pcie-phy0, pcie-phy1 ] + + power-domains: + maxItems: 1 + + mediatek,pbus-csr: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to pbus-csr syscon + - description: offset of pbus-csr base address register + - description: offset of pbus-csr base address mask register + description: + Phandle with two arguments to the syscon node used to detect if + a given address is accessible on PCIe controller. + + '#interrupt-cells': + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + '#address-cells': + const: 0 + '#interrupt-cells': + const: 1 + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - interrupts + - interrupt-names + - interrupt-controller + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + + - if: + properties: + compatible: + const: airoha,an7583-pcie + then: + properties: + reg-names: + const: port1 + + clocks: + maxItems: 1 + + clock-names: + const: sys_ck1 + + phy-names: + const: pcie-phy1 + + power-domain: false + + required: + - resets + - reset-names + - phys + - phy-names + - mediatek,pbus-csr + + - if: + properties: + compatible: + const: mediatek,mt2712-pcie + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + minItems: 2 + maxItems: 2 + + reset: false + + reset-names: false + + power-domains: false + + mediatek,pbus-csr: false + + required: + - phys + - phy-names + + - if: + properties: + compatible: + const: mediatek,mt7622-pcie + then: + properties: + clocks: + minItems: 6 + + reset: false + + reset-names: false + + phys: false + + phy-names: false + + mediatek,pbus-csr: false + + required: + - power-domains + + - if: + properties: + compatible: + const: mediatek,mt7629-pcie + then: + properties: + clocks: + minItems: 6 + + reset: false + + reset-names: false + + mediatek,pbus-csr: false + + required: + - power-domains + + - if: + properties: + compatible: + contains: + const: airoha,en7523-pcie + then: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + reset: false + + reset-names: false + + phys: false + + phy-names: false + + power-domain: false + + mediatek,pbus-csr: false + +unevaluatedProperties: false + +examples: + # MT2712 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + + soc_1 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@112ff000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P1_SEL */ + <&pericfg>; /* CLK_PERI_PCIE1 */ + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P0_SEL */ + <&pericfg>; /* CLK_PERI_PCIE0 */ + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + # MT7622 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt7622-power.h> + + soc_2 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1a143000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; + clocks = <&pciesys>, /* CLK_PCIE_P0_MAC_EN */ + <&pciesys>, /* CLK_PCIE_P0_AHB_EN */ + <&pciesys>, /* CLK_PCIE_P0_AUX_EN */ + <&pciesys>, /* CLK_PCIE_P0_AXI_EN */ + <&pciesys>, /* CLK_PCIE_P0_OBFF_EN */ + <&pciesys>; /* CLK_PCIE_P0_PIPE_EN */ + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0_1 0>, + <0 0 0 2 &pcie_intc0_1 1>, + <0 0 0 3 &pcie_intc0_1 2>, + <0 0 0 4 &pcie_intc0_1 3>; + pcie_intc0_1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; + clocks = <&pciesys>, /* CLK_PCIE_P1_MAC_EN */ + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys>, /* CLK_PCIE_P0_AHB_EN */ + <&pciesys>, /* CLK_PCIE_P1_AUX_EN */ + <&pciesys>, /* CLK_PCIE_P1_AXI_EN */ + <&pciesys>, /* CLK_PCIE_P1_OBFF_EN */ + <&pciesys>; /* CLK_PCIE_P1_PIPE_EN */ + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1_1 0>, + <0 0 0 2 &pcie_intc1_1 1>, + <0 0 0 3 &pcie_intc1_1 2>, + <0 0 0 4 &pcie_intc1_1 3>; + pcie_intc1_1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + # AN7583 + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/en7523-clk.h> + + soc_3 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1fa92000 { + compatible = "airoha,an7583-pcie"; + device_type = "pci"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + + reg = <0x0 0x1fa92000 0x0 0x1670>; + reg-names = "port1"; + + clocks = <&scuclk EN7523_CLK_PCIE>; + clock-names = "sys_ck1"; + + phys = <&pciephy>; + phy-names = "pcie-phy1"; + + ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>; + + resets = <&scuclk>; /* AN7583_PCIE1_RST */ + reset-names = "pcie-rst1"; + + mediatek,pbus-csr = <&pbus_csr 0x8 0xc>; + + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + + pcie_intc1_4: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml new file mode 100644 index 000000000000..66a050028278 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nxp,s32g-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP S32G2xxx/S32G3xxx PCIe Root Complex controller + +maintainers: + - Bogdan Hamciuc <bogdan.hamciuc@nxp.com> + - Ionut Vicovan <ionut.vicovan@nxp.com> + +description: + This PCIe controller is based on the Synopsys DesignWare PCIe IP. + The S32G SoC family has two PCIe controllers, which can be configured as + either Root Complex or Endpoint. + +properties: + compatible: + oneOf: + - enum: + - nxp,s32g2-pcie + - items: + - const: nxp,s32g3-pcie + - const: nxp,s32g2-pcie + + reg: + maxItems: 6 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: atu + - const: dma + - const: ctrl + - const: config + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: msi + - const: dma + minItems: 1 + + pcie@0: + description: + Describe the S32G Root Port. + type: object + $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + reg: + maxItems: 1 + + phys: + maxItems: 1 + + required: + - reg + - phys + + unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - ranges + - pcie@0 + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@40400000 { + compatible = "nxp,s32g3-pcie", "nxp,s32g2-pcie"; + reg = <0x00 0x40400000 0x0 0x00001000>, /* dbi registers */ + <0x00 0x40420000 0x0 0x00001000>, /* dbi2 registers */ + <0x00 0x40460000 0x0 0x00001000>, /* atu registers */ + <0x00 0x40470000 0x0 0x00001000>, /* dma registers */ + <0x00 0x40481000 0x0 0x000000f8>, /* ctrl registers */ + <0x5f 0xffffe000 0x0 0x00002000>; /* config space */ + reg-names = "dbi", "dbi2", "atu", "dma", "ctrl", "config"; + dma-coherent; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = + <0x01000000 0x0 0x00000000 0x5f 0xfffe0000 0x0 0x00010000>, + <0x02000000 0x0 0x00000000 0x58 0x00000000 0x0 0x80000000>, + <0x02000000 0x1 0x00000000 0x59 0x00000000 0x6 0xfffe0000>; + + bus-range = <0x0 0xff>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "dma"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + device_type = "pci"; + phys = <&serdes0 PHY_TYPE_PCIE 0 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 1868a10d5b10..baeb583e0bcd 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -11,7 +11,7 @@ description: | maintainers: - Kishon Vijay Abraham I <kishon@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> properties: $nodename: diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml index 039eecdbd6aa..fe2e8beb5bab 100644 --- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml @@ -72,7 +72,7 @@ required: - reg-names - interrupts - msi-controller - - "#interrupt-cells" + - '#interrupt-cells' - interrupt-map-mask - interrupt-map diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml index ab2509ec1c4b..77f8faf54737 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -8,7 +8,7 @@ title: Qualcomm PCI Express Root Complex Common Properties maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> properties: reg: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index ac3414203d38..bed9a40b186b 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PCIe Endpoint Controller maintainers: - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml index bdddd4f499d1..1f2d098b8638 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml @@ -8,7 +8,7 @@ title: Qualcomm SA8255p based firmware managed and ECAM compliant PCIe Root Comp maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SA8255p SoC PCIe root complex controller is based on the Synopsys diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml index 19afe2a03409..63630a814f28 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml @@ -8,7 +8,7 @@ title: Qualcomm SA8775p PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys @@ -78,6 +78,9 @@ properties: required: - interconnects - interconnect-names + - power-domains + - resets + - reset-names allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml index 4d0a91556603..1f942b3075f1 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC7280 PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys @@ -76,6 +76,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml index 34a4d7b2c845..6a7c410c9fc3 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC8180x PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml index 15ba2385eb73..bc0e71dc06a3 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC8280XP PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys @@ -61,6 +61,9 @@ properties: required: - interconnects - interconnect-names + - power-domains + - resets + - reset-names allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml index 26b247a41785..6a5421e4f19d 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8150 PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys @@ -74,6 +74,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml index af4dae68d508..adbeaa8f2c13 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8250 PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys @@ -83,6 +83,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml index dde3079adbb3..5744d5e969fb 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8350 PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys @@ -73,6 +73,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml index 6e0a6d8f0ed0..28b8ffb74124 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8450 PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys @@ -77,6 +77,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml index 38b561e23c1f..3a94a9c1bb15 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8550 PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on @@ -20,6 +20,7 @@ properties: - const: qcom,pcie-sm8550 - items: - enum: + - qcom,kaanapali-pcie - qcom,sar2130p-pcie - qcom,pcie-sm8650 - qcom,pcie-sm8750 @@ -83,6 +84,11 @@ properties: - const: pci # PCIe core reset - const: link_down # PCIe link down reset +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml index 61581ffbfb24..62c674ca0cf7 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml @@ -8,7 +8,7 @@ title: Qualcomm X1E80100 PCI Express Root Complex maintainers: - Bjorn Andersson <andersson@kernel.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on @@ -73,6 +73,11 @@ properties: - const: pci # PCIe core reset - const: link_down # PCIe link down reset +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index 0e1808105a81..c61930441be0 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -8,7 +8,7 @@ title: Qualcomm PCI express root complex maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> - - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Manivannan Sadhasivam <mani@kernel.org> description: | Qualcomm PCIe root complex controller is based on the Synopsys DesignWare diff --git a/Documentation/devicetree/bindings/pci/renesas,r9a08g045-pcie.yaml b/Documentation/devicetree/bindings/pci/renesas,r9a08g045-pcie.yaml new file mode 100644 index 000000000000..d668782546a2 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/renesas,r9a08g045-pcie.yaml @@ -0,0 +1,249 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/renesas,r9a08g045-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G3S PCIe host controller + +maintainers: + - Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> + +description: + Renesas RZ/G3S PCIe host controller complies with PCIe Base Specification + 4.0 and supports up to 5 GT/s (Gen2). + +properties: + compatible: + const: renesas,r9a08g045-pcie # RZ/G3S + + reg: + maxItems: 1 + + interrupts: + items: + - description: System error interrupt + - description: System error on correctable error interrupt + - description: System error on non-fatal error interrupt + - description: System error on fatal error interrupt + - description: AXI error interrupt + - description: INTA interrupt + - description: INTB interrupt + - description: INTC interrupt + - description: INTD interrupt + - description: MSI interrupt + - description: Link bandwidth interrupt + - description: PME interrupt + - description: DMA interrupt + - description: PCIe event interrupt + - description: Message interrupt + - description: All interrupts + + interrupt-names: + items: + - description: serr + - description: ser_cor + - description: serr_nonfatal + - description: serr_fatal + - description: axi_err + - description: inta + - description: intb + - description: intc + - description: intd + - description: msi + - description: link_bandwidth + - description: pm_pme + - description: dma + - description: pcie_evt + - description: msg + - description: all + + interrupt-controller: true + + clocks: + items: + - description: System clock + - description: PM control clock + + clock-names: + items: + - description: aclk + - description: pm + + resets: + items: + - description: AXI2PCIe Bridge reset + - description: Data link layer/transaction layer reset + - description: Transaction layer (ACLK domain) reset + - description: Transaction layer (PCLK domain) reset + - description: Physical layer reset + - description: Configuration register reset + - description: Configuration register reset + + reset-names: + items: + - description: aresetn + - description: rst_b + - description: rst_gp_b + - description: rst_ps_b + - description: rst_rsm_b + - description: rst_cfg_b + - description: rst_load_b + + power-domains: + maxItems: 1 + + dma-ranges: + description: + A single range for the inbound memory region. + maxItems: 1 + + renesas,sysc: + description: | + System controller registers control and monitor various PCIe + functionalities. + + Control: + - transition to L1 state + - receiver termination settings + - RST_RSM_B signal + + Monitor: + - clkl1pm clock request state + - power off information in L2 state + - errors (fatal, non-fatal, correctable) + $ref: /schemas/types.yaml#/definitions/phandle + +patternProperties: + "^pcie@0,[0-0]$": + type: object + allOf: + - $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + reg: + maxItems: 1 + + vendor-id: + const: 0x1912 + + device-id: + const: 0x0033 + + clocks: + items: + - description: Reference clock + + clock-names: + items: + - const: ref + + required: + - device_type + - vendor-id + - device-id + - clocks + - clock-names + + unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interrupt-names + - interrupt-map + - interrupt-map-mask + - interrupt-controller + - power-domains + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + - renesas,sysc + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a08g045-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@11e40000 { + compatible = "renesas,r9a08g045-pcie"; + reg = <0 0x11e40000 0 0x10000>; + ranges = <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>; + /* Map all possible DRAM ranges (4 GB). */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 1 0x00000000>; + bus-range = <0x0 0xff>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "serr", "serr_cor", "serr_nonfatal", + "serr_fatal", "axi_err", "inta", + "intb", "intc", "intd", "msi", + "link_bandwidth", "pm_pme", "dma", + "pcie_evt", "msg", "all"; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie 0 0 0 0>, /* INTA */ + <0 0 0 2 &pcie 0 0 0 1>, /* INTB */ + <0 0 0 3 &pcie 0 0 0 2>, /* INTC */ + <0 0 0 4 &pcie 0 0 0 3>; /* INTD */ + clocks = <&cpg CPG_MOD R9A08G045_PCI_ACLK>, + <&cpg CPG_MOD R9A08G045_PCI_CLKL1PM>; + clock-names = "aclk", "pm"; + resets = <&cpg R9A08G045_PCI_ARESETN>, + <&cpg R9A08G045_PCI_RST_B>, + <&cpg R9A08G045_PCI_RST_GP_B>, + <&cpg R9A08G045_PCI_RST_PS_B>, + <&cpg R9A08G045_PCI_RST_RSM_B>, + <&cpg R9A08G045_PCI_RST_CFG_B>, + <&cpg R9A08G045_PCI_RST_LOAD_B>; + reset-names = "aresetn", "rst_b", "rst_gp_b", "rst_ps_b", + "rst_rsm_b", "rst_cfg_b", "rst_load_b"; + power-domains = <&cpg>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + renesas,sysc = <&sysc>; + + pcie@0,0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges; + clocks = <&versa3 5>; + clock-names = "ref"; + device_type = "pci"; + vendor-id = <0x1912>; + device-id = <0x0033>; + #address-cells = <3>; + #size-cells = <2>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 6c6d828ce964..355c4a46bd31 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -22,6 +22,7 @@ properties: - const: rockchip,rk3568-pcie - items: - enum: + - rockchip,rk3528-pcie - rockchip,rk3562-pcie - rockchip,rk3576-pcie - rockchip,rk3588-pcie @@ -78,6 +79,7 @@ allOf: compatible: contains: enum: + - rockchip,rk3528-pcie - rockchip,rk3562-pcie - rockchip,rk3576-pcie then: @@ -89,6 +91,7 @@ allOf: compatible: contains: enum: + - rockchip,rk3528-pcie - rockchip,rk3562-pcie - rockchip,rk3576-pcie then: @@ -121,7 +124,6 @@ allOf: - const: dma2 - const: dma3 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index 34594972d8db..6339a76499b2 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -115,11 +115,11 @@ properties: above for new bindings. oneOf: - description: See native 'dbi' clock for details - enum: [ pcie, pcie_apb_sys, aclk_dbi, reg ] + enum: [ pcie, pcie_apb_sys, aclk_dbi, reg, port ] - description: See native 'mstr/slv' clock for details enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ] - description: See native 'pipe' clock for details - enum: [ pcie_phy, pcie_phy_ref, link ] + enum: [ pcie_phy, pcie_phy_ref, link, general ] - description: See native 'aux' clock for details enum: [ pcie_aux ] - description: See native 'ref' clock for details. @@ -176,7 +176,7 @@ properties: - description: See native 'phy' reset for details enum: [ pciephy, link ] - description: See native 'pwr' reset for details - enum: [ turnoff ] + enum: [ turnoff, port ] phys: description: diff --git a/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml new file mode 100644 index 000000000000..c4c00b5fcdc0 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/spacemit,k1-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT K1 PCI Express Host Controller + +maintainers: + - Alex Elder <elder@riscstar.com> + +description: > + The SpacemiT K1 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP. The controller uses the DesignWare built-in MSI interrupt + controller, and supports 256 MSIs. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: spacemit,k1-pcie + + reg: + items: + - description: DesignWare PCIe registers + - description: ATU address space + - description: PCIe configuration space + - description: Link control registers + + reg-names: + items: + - const: dbi + - const: atu + - const: config + - const: link + + clocks: + items: + - description: DWC PCIe Data Bus Interface (DBI) clock + - description: DWC PCIe application AXI-bus master interface clock + - description: DWC PCIe application AXI-bus slave interface clock + + clock-names: + items: + - const: dbi + - const: mstr + - const: slv + + resets: + items: + - description: DWC PCIe Data Bus Interface (DBI) reset + - description: DWC PCIe application AXI-bus master interface reset + - description: DWC PCIe application AXI-bus slave interface reset + + reset-names: + items: + - const: dbi + - const: mstr + - const: slv + + interrupts: + items: + - description: Interrupt used for MSIs + + interrupt-names: + const: msi + + spacemit,apmu: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A phandle that refers to the APMU system controller, whose regmap is + used in managing resets and link state, along with and offset of its + reset control register. + items: + - items: + - description: phandle to APMU system controller + - description: register offset + +patternProperties: + '^pcie@': + type: object + $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + phys: + maxItems: 1 + + vpcie3v3-supply: + description: + A phandle for 3.3v regulator to use for PCIe + + required: + - phys + - vpcie3v3-supply + + unevaluatedProperties: false + +required: + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interrupt-names + - spacemit,apmu + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/spacemit,k1-syscon.h> + pcie@ca400000 { + device_type = "pci"; + compatible = "spacemit,k1-pcie"; + reg = <0xca400000 0x00001000>, + <0xca700000 0x0001ff24>, + <0x9f000000 0x00002000>, + <0xc0c20000 0x00001000>; + reg-names = "dbi", + "atu", + "config", + "link"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x9f002000 0x0 0x00100000>, + <0x02000000 0x0 0x90000000 0x90000000 0x0 0x0f000000>; + interrupts = <142>; + interrupt-names = "msi"; + clocks = <&syscon_apmu CLK_PCIE1_DBI>, + <&syscon_apmu CLK_PCIE1_MASTER>, + <&syscon_apmu CLK_PCIE1_SLAVE>; + clock-names = "dbi", + "mstr", + "slv"; + resets = <&syscon_apmu RESET_PCIE1_DBI>, + <&syscon_apmu RESET_PCIE1_MASTER>, + <&syscon_apmu RESET_PCIE1_SLAVE>; + reset-names = "dbi", + "mstr", + "slv"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_3_cfg>; + spacemit,apmu = <&syscon_apmu 0x3d4>; + + pcie@0 { + device_type = "pci"; + compatible = "pciclass,0604"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie1_phy>; + vpcie3v3-supply = <&pcie_vcc_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml index 5f432452c815..33c80626e8ec 100644 --- a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml @@ -16,7 +16,6 @@ properties: compatible: const: starfive,jh7110-pcie - reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml new file mode 100644 index 000000000000..fae466064780 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC9563 PCIe switch + +maintainers: + - Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> + +description: | + Toshiba TC9563 PCIe switch has one upstream and three downstream ports. + The 3rd downstream port has integrated endpoint device of Ethernet MAC. + Other two downstream ports are supposed to connect to external device. + + The TC9563 PCIe switch can be configured through I2C interface before + PCIe link is established to change FTS, ASPM related entry delays, + tx amplitude etc for better power efficiency and functionality. + +properties: + compatible: + enum: + - pci1179,0623 + + reg: + maxItems: 1 + + resx-gpios: + maxItems: 1 + description: + GPIO controlling the RESX# pin. + + vdd18-supply: true + + vdd09-supply: true + + vddc-supply: true + + vddio1-supply: true + + vddio2-supply: true + + vddio18-supply: true + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A phandle to the parent I2C node and the slave address of the device + used to configure tc9563 to change FTS, tx amplitude etc. + items: + - description: Phandle to the I2C controller node + - description: I2C slave address + +patternProperties: + "^pcie@[1-3],0$": + description: + child nodes describing the internal downstream ports of + the tc9563 switch. + type: object + allOf: + - $ref: "#/$defs/tc9563-node" + - $ref: /schemas/pci/pci-pci-bridge.yaml# + unevaluatedProperties: false + +$defs: + tc9563-node: + type: object + + properties: + toshiba,tx-amplitude-microvolt: + description: + Change Tx Margin setting for low power consumption. + + toshiba,no-dfe-support: + type: boolean + description: + Disable DFE (Decision Feedback Equalizer), which mitigates + intersymbol interference and some reflections caused by + impedance mismatches. + +required: + - resx-gpios + - vdd18-supply + - vdd09-supply + - vddc-supply + - vddio1-supply + - vddio2-supply + - vddio18-supply + - i2c-parent + +allOf: + - $ref: "#/$defs/tc9563-node" + - $ref: /schemas/pci/pci-bus-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + bus-range = <0x01 0xff>; + + pcie@0,0 { + compatible = "pci1179,0623"; + + reg = <0x10000 0x0 0x0 0x0 0x0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + bus-range = <0x02 0xff>; + + i2c-parent = <&qup_i2c 0x77>; + + vdd18-supply = <&vdd>; + vdd09-supply = <&vdd>; + vddc-supply = <&vdd>; + vddio1-supply = <&vdd>; + vddio2-supply = <&vdd>; + vddio18-supply = <&vdd>; + + resx-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + + pcie@1,0 { + compatible = "pciclass,0604"; + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x03 0xff>; + + toshiba,no-dfe-support; + }; + + pcie@2,0 { + compatible = "pciclass,0604"; + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x04 0xff>; + }; + + pcie@3,0 { + compatible = "pciclass,0604"; + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x05 0xff>; + + toshiba,tx-amplitude-microvolt = <10>; + + ethernet@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + }; + + ethernet@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml index 294c7cd84b37..d30b8849db91 100644 --- a/Documentation/devicetree/bindings/pci/versatile.yaml +++ b/Documentation/devicetree/bindings/pci/versatile.yaml @@ -90,5 +90,4 @@ examples: <0x0000 0 0 4 &sic 28>; }; - ... diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml index 0febd04a61f4..dd345cbd0a0b 100644 --- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml @@ -67,8 +67,8 @@ properties: mode-gpios: description: Optional GPIOs for configuring alternate modes items: - - description: "mode selection GPIO #0" - - description: "mode selection GPIO #1" + - description: mode selection GPIO#0 + - description: mode selection GPIO#1 required: - compatible diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index a1b55168e050..863a1a446739 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -35,7 +35,6 @@ properties: - qcom,sm8350-qmp-usb3-uni-phy - qcom,x1e80100-qmp-usb3-uni-phy - reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml index 1283a588416d..a2e609b066ee 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml @@ -116,7 +116,6 @@ patternProperties: input-schmitt-enable: false input-schmitt-disable: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml index a438db8884f2..96e7b6995273 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml @@ -58,7 +58,6 @@ patternProperties: - description: | "pad_setting" indicates the pad configuration value to be applied. - required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ap806-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ap806-pinctrl.yaml new file mode 100644 index 000000000000..00a7e358a8c9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ap806-pinctrl.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,ap806-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell AP806 pin controller + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + const: marvell,ap806-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + properties: + marvell,function: + $ref: /schemas/types.yaml#/definitions/string + description: + Indicates the function to select. + enum: [ gpio, i2c0, sdio, spi0, uart0, uart1 ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + maxItems: 20 + items: + enum: [ + mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9, mpp10, + mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19 + ] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-7k-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,armada-7k-pinctrl.yaml new file mode 100644 index 000000000000..88910ad170e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-7k-pinctrl.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,armada-7k-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 7K/8K pin controller + +maintainers: + - Gregory Clement <gregory.clement@bootlin.com> + - Miquel Raynal <miquel.raynal@bootlin.com> + +properties: + compatible: + enum: + - marvell,armada-7k-pinctrl + - marvell,armada-8k-cpm-pinctrl + - marvell,armada-8k-cps-pinctrl + - marvell,cp115-standalone-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins(-.+)?$': + type: object + additionalProperties: false + + properties: + marvell,function: + $ref: /schemas/types.yaml#/definitions/string + description: + Indicates the function to select. + enum: [ + au, dev, ge, ge0, ge1, gpio, i2c0, i2c1, led, link, mii, mss_gpio0, + mss_gpio1, mss_gpio2, mss_gpio3, mss_gpio4, mss_gpio5, mss_gpio6, + mss_gpio7, mss_i2c, mss_spi, mss_uart, nf, pcie, pcie0, pcie1, pcie2, + ptp, rei, sata0, sata1, sdio, sdio_cd, sdio_wp, sei, spi0, spi1, + synce1, synce2, tdm, uart0, uart1, uart2, uart3, wakeup, xg + ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + maxItems: 63 + items: + pattern: '^mpp([1-5]?[0-9]|6[0-2])$' + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "marvell,armada-7k-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml index 0df4e114fdd6..fa47732d7cef 100644 --- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml @@ -18,7 +18,7 @@ description: | properties: $nodename: - pattern: "^gpio@[0-9a-f]+$" + pattern: '^gpio@[0-9a-f]+$' compatible: enum: @@ -26,10 +26,10 @@ properties: - mscc,ocelot-sgpio - mscc,luton-sgpio - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 0 reg: @@ -76,7 +76,7 @@ properties: - const: switch patternProperties: - "^gpio@[0-1]$": + '^gpio@[0-1]$': type: object properties: compatible: @@ -132,8 +132,8 @@ required: - reg - clocks - microchip,sgpio-port-ranges - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml index 23300606547c..96635b2f6a27 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml @@ -8,7 +8,7 @@ title: Qualcomm IPQ5018 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml index e571cd64418f..22685c479983 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml @@ -8,7 +8,7 @@ title: Qualcomm IPQ5332 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: | Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml index 6f90dbbdbdcc..40def3ac3bf7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm IPQ8074 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml index bca903b5da6d..7afec315b63e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -8,7 +8,7 @@ title: Qualcomm Technologies, Inc. IPQ9574 TLMM block maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml index 3b5045730471..619341dd637c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml @@ -9,7 +9,7 @@ title: Qualcomm SoC LPASS LPI TLMM Common Properties maintainers: - Bjorn Andersson <andersson@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Common properties for the Top Level Mode Multiplexer pin controllers in the diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml index 61f5be21f30c..203ad69e99e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8660 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml index 904af87f9eaf..9bf098cf18ee 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8916 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml index 46618740bd31..435f0dc7a82e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8960 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml index 840fdaabde12..a9aff442824c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8974 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml index d4391c194ff7..501329bff905 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8976 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml index fa90981db40b..2ec10908d556 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8994 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml index c5010c175b23..496f38009c7d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8996 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml index bcaa231adaf7..3b098a226a67 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8998 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 5e6dfcc3fe9b..6632bcd037ba 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -424,13 +424,13 @@ allOf: patternProperties: '-state$': oneOf: - - $ref: "#/$defs/qcom-pmic-gpio-state" + - $ref: '#/$defs/qcom-pmic-gpio-state' - patternProperties: - "(pinconf|-pins)$": - $ref: "#/$defs/qcom-pmic-gpio-state" + '(pinconf|-pins)$': + $ref: '#/$defs/qcom-pmic-gpio-state' additionalProperties: false - "-hog(-[0-9]+)?$": + '-hog(-[0-9]+)?$': type: object required: - gpio-hog @@ -503,7 +503,7 @@ $defs: - gpio1-gpio12 for pmxr2230 items: - pattern: "^gpio([0-9]+)$" + pattern: '^gpio([0-9]+)$' function: items: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index 9364ae05f3e6..daf4c1c03712 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -74,10 +74,10 @@ required: patternProperties: '-state$': oneOf: - - $ref: "#/$defs/qcom-pmic-mpp-state" + - $ref: '#/$defs/qcom-pmic-mpp-state' - patternProperties: '-pins$': - $ref: "#/$defs/qcom-pmic-mpp-state" + $ref: '#/$defs/qcom-pmic-mpp-state' additionalProperties: false $defs: @@ -100,7 +100,7 @@ $defs: - mpp1-mpp4 for pma8084 items: - pattern: "^mpp([0-9]+)$" + pattern: '^mpp([0-9]+)$' function: items: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml index 4009501b3414..91b8dcec3f08 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm QCS404 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC. @@ -142,7 +142,6 @@ examples: interrupt-controller; #interrupt-cells = <2>; - blsp1-i2c1-default-state { pins = "gpio24", "gpio25"; function = "blsp_i2c1"; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml index 5606f2136ad1..ec0bf4fdfa4f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC7180 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml index a00cb43df144..80627a1ad663 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SDM630 and SDM660 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml index 0f331844608c..4fcac2e55b55 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SDM845 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml index f4cf2ce86fcd..d3e4926034a7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -66,7 +66,6 @@ $defs: Specify the alternative function to be configured for the specified pins. - allOf: - $ref: qcom,lpass-lpi-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index ddeaeaa9a450..5a57a59cc1e5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -88,7 +88,6 @@ $defs: uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] - required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml index bdb7ed4be026..c4542e2d7108 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8150 TLMM pin controller maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml index 9d782f910b31..46aec0713775 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8350 SoC LPASS LPI TLMM maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml index bf4a72facae1..89821871c606 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8550 SoC LPASS LPI TLMM maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml index e90a5274647d..74df912e60ad 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8650 SoC LPASS LPI TLMM maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index cfe004573366..075f3abdfbec 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -129,7 +129,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml index 2bd7d47d0fdb..8203c3c46cc7 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -65,7 +65,6 @@ patternProperties: - '#gpio-cells' - gpio-ranges - additionalProperties: anyOf: - type: object @@ -118,7 +117,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' examples: - | @@ -150,7 +149,6 @@ examples: pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; }; - /* * I2c master: both SDA and SCL pins need bi-directional operations * Pin #4 on port #1 is configured as alternate function #1. @@ -162,7 +160,6 @@ examples: pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; }; - /* * Multi-function timer input and output compare pins. */ diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 5156d54b240b..00c05243b9a4 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -135,7 +135,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index 5fa5d31f8866..88b2fa5e684d 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -88,7 +88,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml index f3258f2fd3a4..3f14eab01c54 100644 --- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml @@ -32,7 +32,6 @@ description: | | | | | | | ------- UART0 UART1 -- - The big MUX in the diagram only has 7 different ways of mapping peripherals on the left to pins on the right. StarFive calls the 7 configurations "signal groups". diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt deleted file mode 100644 index a3571937b019..000000000000 --- a/Documentation/devicetree/bindings/power/actions,owl-sps.txt +++ /dev/null @@ -1,21 +0,0 @@ -Actions Semi Owl Smart Power System (SPS) - -Required properties: -- compatible : "actions,s500-sps" for S500 - "actions,s700-sps" for S700 - "actions,s900-sps" for S900 -- reg : Offset and length of the register set for the device. -- #power-domain-cells : Must be 1. - See macros in: - include/dt-bindings/power/owl-s500-powergate.h for S500 - include/dt-bindings/power/owl-s700-powergate.h for S700 - include/dt-bindings/power/owl-s900-powergate.h for S900 - - -Example: - - sps: power-controller@b01b0100 { - compatible = "actions,s500-sps"; - reg = <0xb01b0100 0x100>; - #power-domain-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/power/actions,s500-sps.yaml b/Documentation/devicetree/bindings/power/actions,s500-sps.yaml new file mode 100644 index 000000000000..bb942817b3db --- /dev/null +++ b/Documentation/devicetree/bindings/power/actions,s500-sps.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/actions,s500-sps.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl Smart Power System (SPS) + +maintainers: + - Andreas Färber <afaerber@suse.de> + - Manivannan Sadhasivam <mani@kernel.org> + +properties: + compatible: + enum: + - actions,s500-sps + - actions,s700-sps + - actions,s900-sps + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + power-controller@b01b0100 { + compatible = "actions,s500-sps"; + reg = <0xb01b0100 0x100>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/mediatek,mt8196-gpufreq.yaml b/Documentation/devicetree/bindings/power/mediatek,mt8196-gpufreq.yaml new file mode 100644 index 000000000000..b9e43abaf8a4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/mediatek,mt8196-gpufreq.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/mediatek,mt8196-gpufreq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MFlexGraphics Power and Frequency Controller + +maintainers: + - Nicolas Frattaroli <nicolas.frattaroli@collabora.com> + +description: + A special-purpose embedded MCU to control power and frequency of GPU devices + using MediaTek Flexible Graphics integration hardware. + +properties: + $nodename: + pattern: '^power-controller@[a-f0-9]+$' + + compatible: + enum: + - mediatek,mt8196-gpufreq + + reg: + items: + - description: GPR memory area + - description: RPC memory area + - description: SoC variant ID register + + reg-names: + items: + - const: gpr + - const: rpc + - const: hw-revision + + clocks: + items: + - description: main clock of the embedded controller (EB) + - description: core PLL + - description: stack 0 PLL + - description: stack 1 PLL + + clock-names: + items: + - const: eb + - const: core + - const: stack0 + - const: stack1 + + mboxes: + items: + - description: FastDVFS events + - description: frequency control + - description: sleep control + - description: timer control + - description: frequency hopping control + - description: hardware voter control + - description: FastDVFS control + + mbox-names: + items: + - const: fast-dvfs-event + - const: gpufreq + - const: sleep + - const: timer + - const: fhctl + - const: ccf + - const: fast-dvfs + + memory-region: + items: + - description: phandle to the GPUEB shared memory + + "#clock-cells": + const: 1 + + "#power-domain-cells": + const: 0 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - mboxes + - mbox-names + - memory-region + - "#clock-cells" + - "#power-domain-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mediatek,mt8196-clock.h> + + power-controller@4b09fd00 { + compatible = "mediatek,mt8196-gpufreq"; + reg = <0x4b09fd00 0x80>, + <0x4b800000 0x1000>, + <0x4b860128 0x4>; + reg-names = "gpr", "rpc", "hw-revision"; + clocks = <&topckgen CLK_TOP_MFG_EB>, + <&mfgpll CLK_MFG_AO_MFGPLL>, + <&mfgpll_sc0 CLK_MFGSC0_AO_MFGPLL_SC0>, + <&mfgpll_sc1 CLK_MFGSC1_AO_MFGPLL_SC1>; + clock-names = "eb", "core", "stack0", "stack1"; + mboxes = <&gpueb_mbox 0>, <&gpueb_mbox 1>, <&gpueb_mbox 2>, + <&gpueb_mbox 3>, <&gpueb_mbox 4>, <&gpueb_mbox 5>, + <&gpueb_mbox 7>; + mbox-names = "fast-dvfs-event", "gpufreq", "sleep", "timer", "fhctl", + "ccf", "fast-dvfs"; + memory-region = <&gpueb_shared_memory>; + #clock-cells = <1>; + #power-domain-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index 500d98921581..f8a13928f615 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -33,6 +33,9 @@ properties: - mediatek,mt8188-power-controller - mediatek,mt8192-power-controller - mediatek,mt8195-power-controller + - mediatek,mt8196-hwv-hfrp-power-controller + - mediatek,mt8196-hwv-scp-power-controller + - mediatek,mt8196-power-controller - mediatek,mt8365-power-controller '#power-domain-cells': @@ -157,6 +160,7 @@ allOf: contains: enum: - mediatek,mt8183-power-controller + - mediatek,mt8196-power-controller then: properties: access-controllers: diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index af5fef872529..27af5b8aa134 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -18,6 +18,7 @@ properties: oneOf: - enum: - qcom,glymur-rpmhpd + - qcom,kaanapali-rpmhpd - qcom,mdm9607-rpmpd - qcom,milos-rpmhpd - qcom,msm8226-rpmpd diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml index fba6914ec40d..948a9da111df 100644 --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml @@ -45,7 +45,7 @@ properties: const: 0 additionalProperties: - $ref: "#/$defs/pd-node" + $ref: '#/$defs/pd-node' required: - compatible @@ -83,7 +83,7 @@ $defs: - '#power-domain-cells' additionalProperties: - $ref: "#/$defs/pd-node" + $ref: '#/$defs/pd-node' examples: - | diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml index a884e49c995f..b41db576f95d 100644 --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -46,6 +46,7 @@ properties: - rockchip,rk3576-power-controller - rockchip,rk3588-power-controller - rockchip,rv1126-power-controller + - rockchip,rv1126b-power-controller "#power-domain-cells": const: 1 @@ -126,6 +127,7 @@ $defs: "include/dt-bindings/power/rk3568-power.h" "include/dt-bindings/power/rk3588-power.h" "include/dt-bindings/power/rockchip,rv1126-power.h" + "include/dt-bindings/power/rockchip,rv1126b-power-controller.h" clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml index 4c74cc78729e..3e8689019251 100644 --- a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml @@ -21,7 +21,6 @@ properties: description: Maximum CHGIN regulation voltage in uV. enum: [ 5500000, 6500000, 11000000, 14500000 ] - usb-otg-vbus-regulator: type: object description: OTG boost regulator. diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9756.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9756.yaml new file mode 100644 index 000000000000..a88bf6cd1927 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9756.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt9756.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9756 Smart Cap Divider Charger + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT9756/RT9757 is a high efficiency and high charge current charger. + + The efficiency is up to 98.2% when VBAT = 4V, IBAT = 2A in DIV2 mode and 99.1% + when VBAT=4V, IBAT=1A in bypass mode. The maximum charger current is up to 8A + in DIV2 mode and 5A in bypass mode. The device integrates smart cap divider + topology, direct charging mode, external over-voltage protection control, an + input reverse blocking NFET and 2-way regulation, a dual phase charge pump + core, 8-Channel high speed ADCs and USB BC 1.2 detection. + + RT9770 is almost the same with RT9756/57, only BC 1.2 detection function is + removed to shrink the die size. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - enum: + - richtek,rt9756 + - richtek,rt9770 + - items: + - enum: + - richtek,rt9757 + - const: richtek,rt9756 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: Battery current sense resistor mounted. + default: 2000 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@6f { + compatible = "richtek,rt9756"; + reg = <0x6f>; + wakeup-source; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>; + shunt-resistor-micro-ohms = <5000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml index 994fac12c8da..4f19744844e9 100644 --- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml @@ -65,7 +65,6 @@ properties: - const: vbus_v - const: usb_charger_c - required: - compatible - monitored-battery diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 1b192e197b11..1197858e431f 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -55,7 +55,6 @@ properties: resets: maxItems: 1 - allOf: - $ref: pwm.yaml# diff --git a/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml b/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml new file mode 100644 index 000000000000..855aec59ac53 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/thead,th1520-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD TH1520 PWM controller + +maintainers: + - Michal Wilczynski <m.wilczynski@samsung.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: thead,th1520-pwm + + reg: + maxItems: 1 + + clocks: + items: + - description: SoC PWM clock + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/thead,th1520-clk-ap.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + pwm@ffec01c000 { + compatible = "thead,th1520-pwm"; + reg = <0xff 0xec01c000 0x0 0x4000>; + clocks = <&clk CLK_PWM>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt deleted file mode 100644 index eb871447d508..000000000000 --- a/Documentation/devicetree/bindings/regulator/da9211.txt +++ /dev/null @@ -1,205 +0,0 @@ -* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 - Voltage Regulator - -Required properties: -- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223" - or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225" -- reg: I2C slave address, usually 0x68. -- interrupts: the interrupt outputs of the controller -- regulators: A node that houses a sub-node for each regulator within the - device. Each sub-node is identified using the node's name, with valid - values listed below. The content of each sub-node is defined by the - standard binding for regulators; see regulator.txt. - BUCKA and BUCKB. - -Optional properties: -- enable-gpios: platform gpio for control of BUCKA/BUCKB. -- Any optional property defined in regulator.txt - - regulator-initial-mode and regulator-allowed-modes may be specified using - mode values from dt-bindings/regulator/dlg,da9211-regulator.h - -Example 1) DA9211 - pmic: da9211@68 { - compatible = "dlg,da9211"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <5000000>; - enable-gpios = <&gpio 27 0>; - regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC - DA9211_BUCK_MODE_AUTO>; - }; - }; - }; - -Example 2) DA9212 - pmic: da9212@68 { - compatible = "dlg,da9212"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <5000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <5000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 3) DA9213 - pmic: da9213@68 { - compatible = "dlg,da9213"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - }; - }; - -Example 4) DA9223 - pmic: da9223@68 { - compatible = "dlg,da9223"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - }; - }; - -Example 5) DA9214 - pmic: da9214@68 { - compatible = "dlg,da9214"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 6) DA9224 - pmic: da9224@68 { - compatible = "dlg,da9224"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 7) DA9215 - pmic: da9215@68 { - compatible = "dlg,da9215"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 8) DA9225 - pmic: da9225@68 { - compatible = "dlg,da9225"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml new file mode 100644 index 000000000000..4d7e495a6f59 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,da9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Dialog Semiconductor DA9211-9215, DA9223-9225 Voltage Regulators + +maintainers: + - Ariel D'Alessandro <ariel.dalessandro@collabora.com> + +properties: + compatible: + enum: + - dlg,da9211 + - dlg,da9212 + - dlg,da9213 + - dlg,da9214 + - dlg,da9215 + - dlg,da9223 + - dlg,da9224 + - dlg,da9225 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + description: + List of regulators provided by the device + + patternProperties: + "^BUCK([AB])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for a single BUCK regulator + + properties: + regulator-initial-mode: + items: + enum: [ 1, 2, 3 ] + description: + Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h + + regulator-allowed-modes: + items: + enum: [ 1, 2, 3 ] + description: + Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h + + enable-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/regulator/dlg,da9211-regulator.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@68 { + compatible = "dlg,da9212"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml b/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml new file mode 100644 index 000000000000..c6585e3bacbe --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/fitipower,fp9931.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FitiPower FP9931/JD9930 Power Management Integrated Circuit + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: + FP9931 is a Power Management IC to provide Power for EPDs with one 3.3V + switch, 2 symmetric LDOs behind 2 DC/DC converters, and one unsymmetric + regulator for a compensation voltage. + JD9930 has in addition some kind of night mode. + +properties: + compatible: + oneOf: + - const: fitipower,fp9931 + + - items: + - const: fitipower,jd9930 + - const: fitipower,fp9931 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + pg-gpios: + maxItems: 1 + + en-ts-gpios: + maxItems: 1 + + xon-gpios: + maxItems: 1 + + vin-supply: + description: + Supply for the whole chip. Some vendor kernels and devicetrees + declare this as a non-existing GPIO named "pwrall". + + fitipower,tdly-ms: + description: + Power up soft start delay settings tDLY1-4 bitfields in the + POWERON_DELAY register + items: + - enum: [0, 1, 2, 4] + - enum: [0, 1, 2, 4] + - enum: [0, 1, 2, 4] + - enum: [0, 1, 2, 4] + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(vcom|vposneg|v3p3)$": + unevaluatedProperties: false + type: object + $ref: /schemas/regulator/regulator.yaml + +required: + - compatible + - reg + - pg-gpios + - enable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "fitipower,fp9931"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fp9931_gpio>; + vin-supply = <&epd_pmic_supply>; + pg-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + en-ts-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + fitipower,tdly-ms = <2 2 4 4>; + + regulators { + vcom { + regulator-name = "vcom"; + regulator-min-microvolt = <2352840>; + regulator-max-microvolt = <2352840>; + }; + + vposneg { + regulator-name = "vposneg"; + regulator-min-microvolt = <15060000>; + regulator-max-microvolt = <15060000>; + }; + + v3p3 { + regulator-name = "v3p3"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6316b-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6316b-regulator.yaml new file mode 100644 index 000000000000..ea595935f4c4 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6316b-regulator.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6316b-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6316 BP/VP SPMI PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The MediaTek MT6316BP/VP PMICs are fully controlled by SPMI interface, both + feature four step-down DC/DC (buck) converters, and provides 2+2 Phases, + joining Buck 1+2 for the first phase, and Buck 3+4 for the second phase. + +properties: + compatible: + const: mediatek,mt6316b-regulator + + reg: + maxItems: 1 + +patternProperties: + "^vbuck(12|34)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, will shut down unnecessary IP + blocks and secondary phases to reduce quiescent current. + This mode does not limit the maximum output current but unless + only a light load is applied, there will be regulation accuracy + and efficiency losses. + minItems: 1 + maxItems: 3 + items: + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@8 { + compatible = "mediatek,mt6316b-regulator"; + reg = <0x8 SPMI_USID>; + + vbuck12 { + regulator-name = "dvdd_core"; + regulator-min-microvolt = <450000>; + regulator-max-microvolt = <965000>; + regulator-allowed-modes = <0 1 2>; + regulator-enable-ramp-delay = <256>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6316c-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6316c-regulator.yaml new file mode 100644 index 000000000000..186dcd3f11ed --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6316c-regulator.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6316c-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6316 CP/HP/KP SPMI PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The MediaTek MT6316CP/HP/KP PMICs are fully controlled by SPMI interface, + features four step-down DC/DC (buck) converters, and provides 3+1 Phases, + joining Buck 1+2+4 for the first phase, and uses Buck 3 for the second. + +properties: + compatible: + const: mediatek,mt6316c-regulator + + reg: + maxItems: 1 + +patternProperties: + "^vbuck(124|3)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, will shut down unnecessary IP + blocks and secondary phases to reduce quiescent current. + This mode does not limit the maximum output current but unless + only a light load is applied, there will be regulation accuracy + and efficiency losses. + minItems: 1 + maxItems: 3 + items: + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@6 { + compatible = "mediatek,mt6316c-regulator"; + reg = <0x6 SPMI_USID>; + + vbuck124 { + regulator-name = "dvdd_proc_m"; + regulator-min-microvolt = <450000>; + regulator-max-microvolt = <1277500>; + regulator-allowed-modes = <0 1 2>; + regulator-enable-ramp-delay = <256>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6316d-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6316d-regulator.yaml new file mode 100644 index 000000000000..aa9e9ef3b52d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6316d-regulator.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6316d-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6316 DP/TP SPMI PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The MediaTek MT6316DP/TP PMICs are fully controlled by SPMI interface, both + feature four step-down DC/DC (buck) converters, and provides a single Phase, + joining Buck 1+2+3+4. + +properties: + compatible: + const: mediatek,mt6316d-regulator + + reg: + maxItems: 1 + + vbuck1234: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, will shut down unnecessary IP + blocks and secondary phases to reduce quiescent current. + This mode does not limit the maximum output current but unless + only a light load is applied, there will be regulation accuracy + and efficiency losses. + minItems: 1 + maxItems: 3 + items: + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@7 { + compatible = "mediatek,mt6316d-regulator"; + reg = <0x7 SPMI_USID>; + + vbuck1234 { + regulator-name = "dvdd_gpustack"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1277500>; + regulator-allowed-modes = <0 1 2>; + regulator-enable-ramp-delay = <256>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6363-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6363-regulator.yaml new file mode 100644 index 000000000000..4f79d4f81d49 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6363-regulator.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6363-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6363 PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The MT6363 SPMI PMIC provides 10 BUCK and 25 LDO (Low DropOut) regulators + and can optionally provide overcurrent warnings with one ocp interrupt + for each voltage regulator. + +properties: + compatible: + const: mediatek,mt6363-regulator + + reg: + maxItems: 1 + + vsys-vbuck1-supply: + description: Input supply for vbuck1 + + vsys-vbuck2-supply: + description: Input supply for vbuck2 + + vsys-vbuck3-supply: + description: Input supply for vbuck3 + + vsys-vbuck4-supply: + description: Input supply for vbuck4 + + vsys-vbuck5-supply: + description: Input supply for vbuck5 + + vsys-vbuck6-supply: + description: Input supply for vbuck6 + + vsys-vbuck7-supply: + description: Input supply for vbuck7 + + vsys-vs1-supply: + description: Input supply for vs1 + + vsys-vs2-supply: + description: Input supply for vs2 + + vsys-vs3-supply: + description: Input supply for vs3 + + vs1-ldo1-supply: + description: Input supply for va15, vio0p75, vm18, vrf18, vrf-io18 + + vs1-ldo2-supply: + description: Input supply for vcn15, vio18, vufs18 + + vs2-ldo1-supply: + description: Input supply for vsram-cpub, vsram-cpum, vrf12, vrf13, vufs12 + + vs2-ldo2-supply: + description: Input supply for va12-1, va12-2, vcn13, vsram-cpul + + vs3-ldo1-supply: + description: Input supply for vsram-apu, vsram-digrf, vsram-mdfe + + vs3-ldo2-supply: + description: Input supply for vsram-modem, vrf0p9 + + vsys-ldo1-supply: + description: Input supply for vaux18, vemc, vtref18 + +patternProperties: + "^v(buck[1-7]|s[1-3])$": + description: Buck regulators + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, does not limit the maximum out + current but unless only a light load is applied, there will be + regulation accuracy and efficiency losses. + 3 - Forced Ultra Low Power mode for ultra low load, this greatly + reduces the maximum output power, makes the regulator to be + efficient only for ultra light load, and greatly reduces the + quiescent current (Iq) of the buck. + maxItems: 3 + items: + enum: [ 0, 1, 2, 3 ] + + "^va(12-1|12-2|15)$": + $ref: "#/$defs/ldo-common" + + "^v(aux|m|rf-io|tref)18$": + $ref: "#/$defs/ldo-common" + + "^v(cn13|cn15|emc)$": + $ref: "#/$defs/ldo-common" + + "^vio(0p75|18)$": + $ref: "#/$defs/ldo-common" + + "^vrf(0p9|12|13|18)$": + $ref: "#/$defs/ldo-common" + + "^vsram-(apu|cpub|cpum|cpul|digrf|mdfe|modem)$": + $ref: "#/$defs/ldo-common" + + "^vufs(12|18)$": + $ref: "#/$defs/ldo-common" + +$defs: + ldo-common: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed LDO regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, does not limit the maximum out + current but unless only a light load is applied, there will be + regulation accuracy and efficiency losses. + maxItems: 2 + items: + enum: [ 0, 2 ] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index a5486c36830f..ec04adfb9d1c 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -41,6 +41,21 @@ properties: interrupts: maxItems: 1 + inl1-supply: + description: Regulator supply for the INL1 pin group, powering LDOx + + inb13-supply: + description: + Regulator supply for the INB13 pin group, powering BUCK1 and BUCK3. + + inb26-supply: + description: + Regulator supply for the INB26 pin group, powering BUCK2 and BUCK6. + + inb45-supply: + description: + Regulator supply for the INB45 pin group, powering BUCK4 and BUCK5. + regulators: type: object description: | @@ -124,6 +139,30 @@ properties: When WDOG_B signal is asserted a warm reset will be done instead of cold reset. + nxp,pmic-on-req-on-debounce-us: + enum: [ 120, 20000, 100000, 750000 ] + description: Debounce time for PMIC_ON_REQ high. + + nxp,pmic-on-req-off-debounce-us: + enum: [ 120, 2000 ] + description: Debounce time for PMIC_ON_REQ is asserted low + + nxp,power-on-step-ms: + enum: [ 1, 2, 4, 8] + description: Time step configuration during power on sequence + + nxp,power-down-step-ms: + enum: [ 2, 4, 8, 16 ] + description: Time step configuration during power down sequence + + nxp,restart-ms: + enum: [ 250, 500 ] + description: Time to stay off regulators during Cold reset + + npx,pmic-rst-b-debounce-ms: + enum: [ 10, 50, 100, 500, 1000, 2000, 4000, 8000 ] + description: PMIC_RST_B debounce time + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 4c5b0629aa3e..58bb0ad5dda4 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -8,7 +8,7 @@ title: Qualcomm Technologies, Inc. RPMh Regulators maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: | rpmh-regulator devices support PMIC regulator management via the Voltage @@ -51,10 +51,15 @@ description: | For PM8450, smps1 - smps6, ldo1 - ldo4 For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2 For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 + For PMH0101, ldo1 - ldo18, bob1 - bob2 + For PMH0104, smps1 - smps4 + For PMH0110, smps1 - smps10, ldo1 - ldo4 For PMI8998, bob For PMC8380, smps1 - smps8, ldo1 - lodo3 + For PMCX0102, smps1 - smps10, ldo1 - ldo4 For PMR735A, smps1 - smps3, ldo1 - ldo7 For PMR735B, ldo1 - ldo12 + For PMR735D, ldo1 - ldo7 For PMX55, smps1 - smps7, ldo1 - ldo16 For PMX65, smps1 - smps8, ldo1 - ldo21 For PMX75, smps1 - smps10, ldo1 - ldo21 @@ -85,12 +90,17 @@ properties: - qcom,pmc8180-rpmh-regulators - qcom,pmc8180c-rpmh-regulators - qcom,pmc8380-rpmh-regulators + - qcom,pmcx0102-rpmh-regulators - qcom,pmg1110-rpmh-regulators + - qcom,pmh0101-rpmh-regulators + - qcom,pmh0104-rpmh-regulators + - qcom,pmh0110-rpmh-regulators - qcom,pmi8998-rpmh-regulators - qcom,pmm8155au-rpmh-regulators - qcom,pmm8654au-rpmh-regulators - qcom,pmr735a-rpmh-regulators - qcom,pmr735b-rpmh-regulators + - qcom,pmr735d-rpmh-regulators - qcom,pmx55-rpmh-regulators - qcom,pmx65-rpmh-regulators - qcom,pmx75-rpmh-regulators @@ -100,7 +110,7 @@ properties: RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n] + pattern: "^[a-n]|[A-N]_E[0-3]+$" qcom,always-wait-for-ack: description: | @@ -246,6 +256,7 @@ allOf: compatible: enum: - qcom,pm8005-rpmh-regulators + - qcom,pmh0104-rpmh-regulators then: patternProperties: "^vdd-s[1-4]-supply$": true @@ -426,6 +437,34 @@ allOf: properties: compatible: enum: + - qcom,pmh0101-rpmh-regulators + then: + properties: + vdd-l1-l4-l10-supply: true + vdd-l2-l13-l14-supply: true + vdd-l3-l11-supply: true + vdd-l5-l16-supply: true + vdd-l6-l7-supply: true + vdd-l8-l9-supply: true + patternProperties: + "^vdd-l(1[2578])-supply$": true + "^vdd-bob[1-2]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmcx0102-rpmh-regulators + - qcom,pmh0110-rpmh-regulators + then: + patternProperties: + "^vdd-l[1-4]-supply$": true + "^vdd-s([1-9]|10)-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pmi8998-rpmh-regulators then: properties: @@ -463,6 +502,18 @@ allOf: properties: compatible: enum: + - qcom,pmr735d-rpmh-regulators + then: + properties: + vdd-l1-l2-l5-supply: true + vdd-l3-l4-supply: true + patternProperties: + "^vdd-l[6-7]-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pmx55-rpmh-regulators then: properties: diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml index b73762e151bb..84546fec3b18 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -55,7 +55,6 @@ properties: delay time 0us, 10us, 20us, 40us. If this property is missing then keep in chip default. - richtek,switch-freq-select: $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2] diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index a492f74a8608..a927551356e6 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -79,7 +79,6 @@ properties: It should be set as 3 (Single-Core mode) which is also the default if omitted. - # R5F Processor Child Nodes: # ========================== @@ -167,7 +166,6 @@ patternProperties: - description: region reserved for firmware image sections additionalItems: true - # Optional properties: # -------------------- # The following properties are optional properties for each of the R5F cores: diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml index 1db08ce9ae27..68640abacd95 100644 --- a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml @@ -40,7 +40,6 @@ properties: Please see https://software-dl.ti.com/tisci/esd/latest/index.html for protocol documentation for the values to be used for different devices. - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml index 0877eb44f9ed..f501fc7691c6 100644 --- a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml +++ b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml @@ -44,7 +44,6 @@ properties: - const: core - const: reg - allOf: - if: properties: @@ -58,7 +57,6 @@ allOf: required: - interrupts - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml index ea6abfe2d95e..bc2e48754805 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM SoC Serial UART maintainers: - Bjorn Andersson <andersson@kernel.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The MSM serial UART hardware is designed for low-speed use cases where a diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml index e0fa363ad7e2..788ef5c1c446 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml @@ -9,7 +9,7 @@ title: Qualcomm MSM Serial UARTDM maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: | The MSM serial UARTDM hardware is designed for high-speed use cases where the diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml index abf61c15246e..27a92b79c724 100644 --- a/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml +++ b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml index e28ef198a801..039c8e4a4c51 100644 --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml @@ -13,23 +13,21 @@ description: | maintainers: - Nicolas Saenz Julienne <nsaenz@kernel.org> -allOf: - - $ref: /schemas/watchdog/watchdog.yaml# - properties: compatible: items: - enum: - brcm,bcm2835-pm - brcm,bcm2711-pm + - brcm,bcm2712-pm - const: brcm,bcm2835-pm-wdt reg: - minItems: 2 + minItems: 1 maxItems: 3 reg-names: - minItems: 2 + minItems: 1 items: - const: pm - const: asb @@ -62,7 +60,35 @@ required: - reg - "#power-domain-cells" - "#reset-cells" - - clocks + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm2835-pm + - brcm,bcm2711-pm + then: + required: + - clocks + + properties: + reg: + minItems: 2 + + reg-names: + minItems: 2 + + else: + properties: + reg: + maxItems: 1 + + reg-names: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml index cf0f38dbbe0d..2c06d869fdb5 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml @@ -30,7 +30,6 @@ properties: $ref: /schemas/types.yaml#/definitions/string enum: [host, slave] - patternProperties: '^data\-only@[a-f0-9]+$': type: object diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml index a10326a9683d..5267cfe92572 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml @@ -91,7 +91,6 @@ allOf: required: - clocks - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 2c7275c4503b..668b943db173 100644 --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -57,7 +57,7 @@ properties: const: 0 patternProperties: - "^timer@[0-2]$": + '^timer@[0-2]$': description: The timer block channels that are used as timers or counters. type: object additionalProperties: false @@ -80,7 +80,7 @@ patternProperties: - compatible - reg - "^pwm@[0-2]$": + '^pwm@[0-2]$': description: The timer block channels that are used as PWMs. $ref: /schemas/pwm/pwm.yaml# type: object @@ -92,7 +92,7 @@ patternProperties: TCB channel to use for this PWM. enum: [ 0, 1, 2 ] - "#pwm-cells": + '#pwm-cells': description: The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. @@ -101,11 +101,10 @@ patternProperties: required: - compatible - reg - - "#pwm-cells" + - '#pwm-cells' additionalProperties: false - allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml index c33704333e49..d9f6d34a61c6 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml @@ -9,7 +9,7 @@ title: Qualcomm General Serial Bus Interface (GSBI) maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The GSBI controller is modeled as a node with zero or more child nodes, each diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml index d9fabefc8147..b667f4afdb55 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -9,7 +9,7 @@ title: Qualcomm Shared Memory Driver maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The Qualcomm Shared Memory Driver is a FIFO based communication channel for diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml index 1ba1d419e83b..f91276822858 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -9,7 +9,7 @@ title: Qualcomm Shared Memory Point 2 Point maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The Shared Memory Point to Point (SMP2P) protocol facilitates communication diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml index 4900215f26af..67d4a7cb9eeb 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml @@ -9,7 +9,7 @@ title: Qualcomm Shared Memory State Machine maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The Shared Memory State Machine facilitates broadcasting of single bit state diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index dca5e27b8233..0b8e3294c83e 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -317,7 +317,6 @@ allOf: properties: clocks: false - examples: - | #include <dt-bindings/clock/rk3399-cru.h> diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml index 7140c312d898..f516960dbbef 100644 --- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml @@ -133,12 +133,12 @@ properties: property. The supported-hw is a bitfield indicating SoC speedo or process ID mask. - "#power-domain-cells": + '#power-domain-cells': const: 0 required: - operating-points-v2 - - "#power-domain-cells" + - '#power-domain-cells' i2c-thermtrip: type: object @@ -220,7 +220,7 @@ properties: xusbc USB Partition C Tegra114/124/210 patternProperties: - "^[a-z0-9]+$": + '^[a-z0-9]+$': type: object additionalProperties: false properties: @@ -365,9 +365,9 @@ allOf: additionalProperties: false dependencies: - nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] - nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"] - nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"] + nvidia,suspend-mode: ['nvidia,core-pwr-off-time', 'nvidia,cpu-pwr-off-time'] + nvidia,core-pwr-off-time: ['nvidia,core-pwr-good-time'] + nvidia,cpu-pwr-off-time: ['nvidia,cpu-pwr-good-time'] examples: - | diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index b5336bcbfb01..d97e88433d2f 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -11,7 +11,6 @@ maintainers: - Suman Anna <s-anna@ti.com> description: |+ - The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x, Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC @@ -44,7 +43,6 @@ description: |+ integration within the IP and the SoC. These nodes are described in the following sections. - PRU-ICSS Node ============== Each PRU-ICSS instance is represented as its own node with the individual PRU @@ -54,7 +52,6 @@ description: |+ See ../../mfd/syscon.yaml for generic SysCon binding details. - properties: $nodename: pattern: "^(pruss|icssg)@[0-9a-f]+$" diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml index ea62e51aba90..9a7ff50a0a22 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -4,7 +4,6 @@ $id: http://devicetree.org/schemas/sound/adi,adau1372.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# - title: Analog Devices ADAU1372 CODEC maintainers: diff --git a/Documentation/devicetree/bindings/sound/adi,adau7002.yaml b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml index fcca0fde7d86..7858f3f8ec2f 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7002.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> allOf: - $ref: dai-common.yaml# diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 12f60507aed7..11f59c29b575 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -4,7 +4,6 @@ $id: http://devicetree.org/schemas/sound/adi,adau7118.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# - title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter maintainers: diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml deleted file mode 100644 index c388cda56011..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,max98363.yaml +++ /dev/null @@ -1,60 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/adi,max98363.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Analog Devices MAX98363 SoundWire Amplifier - -maintainers: - - Ryan Lee <ryans.lee@analog.com> - -description: - The MAX98363 is a SoundWire input Class D mono amplifier that - supports MIPI SoundWire v1.2-compatible digital interface for - audio and control data. - SoundWire peripheral device ID of MAX98363 is 0x3*019f836300 - where * is the peripheral device unique ID decoded from pin. - It supports up to 10 peripheral devices(0x0 to 0x9). - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: sdw3019f836300 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - "#sound-dai-cells" - -unevaluatedProperties: false - -examples: - - | - soundwire@3250000 { - #address-cells = <2>; - #size-cells = <0>; - reg = <0x3250000 0x2000>; - - speaker@0,0 { - compatible = "sdw3019f836300"; - reg = <0 0>; - #sound-dai-cells = <0>; - sound-name-prefix = "Speaker Left"; - }; - - speaker@0,1 { - compatible = "sdw3019f836300"; - reg = <0 1>; - #sound-dai-cells = <0>; - sound-name-prefix = "Speaker Right"; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt deleted file mode 100644 index 3b3302fe399b..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt +++ /dev/null @@ -1,19 +0,0 @@ -Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices - -SSM2602 support both I2C and SPI as the configuration interface, -the selection is made by the MODE strap-in pin. -SSM2603 and SSM2604 only support I2C as the configuration interface. - -Required properties: - - - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - - Example: - - ssm2602: ssm2602@1a { - compatible = "adi,ssm2602"; - reg = <0x1a>; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml deleted file mode 100644 index 144450df5869..000000000000 --- a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Analog Devices SSM3515 Audio Amplifier - -maintainers: - - Martin Povišer <povik+lin@cutebit.org> - -description: | - SSM3515 is a mono Class-D audio amplifier with digital input. - - https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - adi,ssm3515 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@14 { - compatible = "adi,ssm3515"; - reg = <0x14>; - #sound-dai-cells = <0>; - sound-name-prefix = "Left Tweeter"; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index 739114fb6549..ae86cb5f0a74 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -33,7 +33,9 @@ properties: - const: allwinner,sun50i-h6-i2s - const: allwinner,sun50i-r329-i2s - items: - - const: allwinner,sun20i-d1-i2s + - enum: + - allwinner,sun20i-d1-i2s + - allwinner,sun55i-a523-i2s - const: allwinner,sun50i-r329-i2s reg: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index aa32dc950e72..1d089ba70f45 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -23,6 +23,7 @@ properties: - const: allwinner,sun8i-h3-spdif - const: allwinner,sun50i-h6-spdif - const: allwinner,sun50i-h616-spdif + - const: allwinner,sun55i-a523-spdif - items: - const: allwinner,sun8i-a83t-spdif - const: allwinner,sun8i-h3-spdif @@ -37,14 +38,12 @@ properties: maxItems: 1 clocks: - items: - - description: Bus Clock - - description: Module Clock + minItems: 2 + maxItems: 3 clock-names: - items: - - const: apb - - const: spdif + minItems: 2 + maxItems: 3 # Even though it only applies to subschemas under the conditionals, # not listing them here will trigger a warning because of the @@ -65,6 +64,7 @@ allOf: - allwinner,sun8i-h3-spdif - allwinner,sun50i-h6-spdif - allwinner,sun50i-h616-spdif + - allwinner,sun55i-a523-spdif then: required: @@ -98,6 +98,38 @@ allOf: - const: rx - const: tx + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun55i-a523-spdif + + then: + properties: + clocks: + items: + - description: Bus Clock + - description: TX Clock + - description: RX Clock + + clock-names: + items: + - const: apb + - const: tx + - const: rx + else: + properties: + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: spdif + required: - "#sound-dai-cells" - compatible diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml index 68fbf5cc208f..d286eb169915 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml @@ -25,6 +25,16 @@ properties: reg: maxItems: 1 + clocks: + items: + - description: + Master clock connected to the MCLK pin if MCLK is an input (i.e. no + crystal used). + + clock-names: + items: + - const: mclk + spi-cpha: true spi-cpol: true diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml index 9582eb8eb418..7600fff0e3b7 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml @@ -15,10 +15,15 @@ description: allOf: - $ref: dai-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: enum: + - cirrus,cs4282 + - cirrus,cs4302 + - cirrus,cs4304 + - cirrus,cs4308 - cirrus,cs5302 - cirrus,cs5304 - cirrus,cs5308 @@ -26,6 +31,9 @@ properties: reg: maxItems: 1 + spi-max-frequency: + maximum: 24000000 + '#sound-dai-cells': const: 1 diff --git a/Documentation/devicetree/bindings/sound/cs4265.txt b/Documentation/devicetree/bindings/sound/cs4265.txt deleted file mode 100644 index 380fff8e4e83..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4265.txt +++ /dev/null @@ -1,29 +0,0 @@ -CS4265 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "cirrus,cs4265" - - - reg : the I2C address of the device for I2C. The I2C address depends on - the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f. - If it is low, the i2c address is 0x4e. - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. - -Examples: - -codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ - compatible = "cirrus,cs4265"; - reg = <0x4f>; -}; - - -codec_ad0_low: cs4265@4e { /* AD0 Pin is low */ - compatible = "cirrus,cs4265"; - reg = <0x4e>; -}; diff --git a/Documentation/devicetree/bindings/sound/cs4341.txt b/Documentation/devicetree/bindings/sound/cs4341.txt deleted file mode 100644 index c1d5c8ad1a36..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4341.txt +++ /dev/null @@ -1,22 +0,0 @@ -Cirrus Logic CS4341 audio DAC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - compatible: "cirrus,cs4341a" - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -For required properties on I2C-bus, please consult -dtschema schemas/i2c/i2c-controller.yaml -For required properties on SPI-bus, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - codec: cs4341@0 { - #sound-dai-cells = <0>; - compatible = "cirrus,cs4341a"; - reg = <0>; - spi-max-frequency = <6000000>; - }; diff --git a/Documentation/devicetree/bindings/sound/cs4349.txt b/Documentation/devicetree/bindings/sound/cs4349.txt deleted file mode 100644 index 54c117b59dba..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4349.txt +++ /dev/null @@ -1,19 +0,0 @@ -CS4349 audio CODEC - -Required properties: - - - compatible : "cirrus,cs4349" - - - reg : the I2C address of the device for I2C - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. - -Example: - -codec: cs4349@48 { - compatible = "cirrus,cs4349"; - reg = <0x48>; - reset-gpios = <&gpio 54 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/da9055.txt b/Documentation/devicetree/bindings/sound/da9055.txt deleted file mode 100644 index 75c6338b6ae2..000000000000 --- a/Documentation/devicetree/bindings/sound/da9055.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Dialog DA9055 Audio CODEC - -DA9055 provides Audio CODEC support (I2C only). - -The Audio CODEC device in DA9055 has its own I2C address which is configurable, -so the device is instantiated separately from the PMIC (MFD) device. - -For details on accompanying PMIC I2C device, see the following: -Documentation/devicetree/bindings/mfd/da9055.txt - -Required properties: - - - compatible: "dlg,da9055-codec" - - reg: Specifies the I2C slave address - - -Example: - - codec: da9055-codec@1a { - compatible = "dlg,da9055-codec"; - reg = <0x1a>; - }; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98090.yaml b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml index 65e4c516912f..9df1296aacb7 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98090.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX98090/MAX98091 audio codecs maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: | Pins on the device (for linking into audio routes): diff --git a/Documentation/devicetree/bindings/sound/maxim,max98095.yaml b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml index 77544a9e1587..76ea4fe711de 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98095.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX98095 audio codec maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> allOf: - $ref: dai-common.yaml# diff --git a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml index 23f19a9d2c06..6d33bb4a98ae 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX98504 class D mono speaker amplifier maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: Maxim Integrated MAX98504 speaker amplifier supports I2C control interface diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml new file mode 100644 index 000000000000..9c9f21652af9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8189-afe-pcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Audio Front End PCM controller for MT8189 + +maintainers: + - Darren Ye <darren.ye@mediatek.com> + - Cyril Chao <cyril.chao@mediatek.com> + +properties: + compatible: + const: mediatek,mt8189-afe-pcm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + memory-region: + maxItems: 1 + + mediatek,apmixedsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: To set up the apll12 tuner + + power-domains: + maxItems: 1 + + clocks: + items: + - description: mux for audio intbus + - description: mux for audio engen1 + - description: mux for audio engen2 + - description: mux for audio h + - description: audio apll1 clock + - description: audio apll2 clock + - description: audio apll1 divide4 + - description: audio apll2 divide4 + - description: audio apll12 divide for i2sin0 + - description: audio apll12 divide for i2sin1 + - description: audio apll12 divide for i2sout0 + - description: audio apll12 divide for i2sout1 + - description: audio apll12 divide for fmi2s + - description: audio apll12 divide for tdmout mck + - description: audio apll12 divide for tdmout bck + - description: mux for audio apll1 + - description: mux for audio apll2 + - description: mux for i2sin0 mck + - description: mux for i2sin1 mck + - description: mux for i2sout0 mck + - description: mux for i2sout1 mck + - description: mux for fmi2s mck + - description: mux for tdmout mck + - description: 26m clock + - description: audio slv clock + - description: audio mst clock + - description: audio intbus clock + + clock-names: + items: + - const: top_aud_intbus + - const: top_aud_eng1 + - const: top_aud_eng2 + - const: top_aud_h + - const: apll1 + - const: apll2 + - const: apll1_d4 + - const: apll2_d4 + - const: apll12_div_i2sin0 + - const: apll12_div_i2sin1 + - const: apll12_div_i2sout0 + - const: apll12_div_i2sout1 + - const: apll12_div_fmi2s + - const: apll12_div_tdmout_m + - const: apll12_div_tdmout_b + - const: top_apll1 + - const: top_apll2 + - const: top_i2sin0 + - const: top_i2sin1 + - const: top_i2sout0 + - const: top_i2sout1 + - const: top_fmi2s + - const: top_dptx + - const: clk26m + - const: aud_slv_ck_peri + - const: aud_mst_ck_peri + - const: aud_intbus_ck_peri + +required: + - compatible + - reg + - interrupts + - memory-region + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + afe@11050000 { + compatible = "mediatek,mt8189-afe-pcm"; + reg = <0 0x11050000 0 0x10000>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + memory-region = <&afe_dma_mem_reserved>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + power-domains = <&scpsys 1>; //MT8189_POWER_DOMAIN_AUDIO + clocks = <&topckgen_clk 23>, //CLK_TOP_AUD_INTBUS_SEL + <&topckgen_clk 39>, //CLK_TOP_AUD_ENGEN1_SEL + <&topckgen_clk 40>, //CLK_TOP_AUD_ENGEN2_SEL + <&topckgen_clk 49>, //CLK_TOP_AUDIO_H_SEL + <&topckgen_clk 146>, //CLK_TOP_APLL1 + <&topckgen_clk 151>, //CLK_TOP_APLL2 + <&topckgen_clk 148>, //CLK_TOP_APLL1_D4 + <&topckgen_clk 153>, //CLK_TOP_APLL2_D4 + <&topckgen_clk 93>, //CLK_TOP_APLL12_CK_DIV_I2SIN0 + <&topckgen_clk 94>, //CLK_TOP_APLL12_CK_DIV_I2SIN1 + <&topckgen_clk 95>, //CLK_TOP_APLL12_CK_DIV_I2SOUT0 + <&topckgen_clk 96>, //CLK_TOP_APLL12_CK_DIV_I2SOUT1 + <&topckgen_clk 97>, //CLK_TOP_APLL12_CK_DIV_FMI2S + <&topckgen_clk 98>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_M + <&topckgen_clk 99>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_B + <&topckgen_clk 44>, //CLK_TOP_AUD_1_SEL + <&topckgen_clk 45>, //CLK_TOP_AUD_2_SEL + <&topckgen_clk 78>, //CLK_TOP_APLL_I2SIN0_MCK_SEL + <&topckgen_clk 79>, //CLK_TOP_APLL_I2SIN1_MCK_SEL + <&topckgen_clk 84>, //CLK_TOP_APLL_I2SOUT0_MCK_SEL + <&topckgen_clk 85>, //CLK_TOP_APLL_I2SOUT1_MCK_SEL + <&topckgen_clk 90>, //CLK_TOP_APLL_FMI2S_MCK_SEL + <&topckgen_clk 91>, //CLK_TOP_APLL_TDMOUT_MCK_SEL + <&topckgen_clk 191>, //CLK_TOP_TCK_26M_MX9 + <&pericfg_ao_clk 77>, //CLK_PERAO_AUDIO0 + <&pericfg_ao_clk 78>, //CLK_PERAO_AUDIO1 + <&pericfg_ao_clk 79>; //CLK_PERAO_AUDIO2 + clock-names = "top_aud_intbus", + "top_aud_eng1", + "top_aud_eng2", + "top_aud_h", + "apll1", + "apll2", + "apll1_d4", + "apll2_d4", + "apll12_div_i2sin0", + "apll12_div_i2sin1", + "apll12_div_i2sout0", + "apll12_div_i2sout1", + "apll12_div_fmi2s", + "apll12_div_tdmout_m", + "apll12_div_tdmout_b", + "top_apll1", + "top_apll2", + "top_i2sin0", + "top_i2sin1", + "top_i2sout0", + "top_i2sout1", + "top_fmi2s", + "top_dptx", + "clk26m", + "aud_slv_ck_peri", + "aud_mst_ck_peri", + "aud_intbus_ck_peri"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml new file mode 100644 index 000000000000..dd9ee0a3b292 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8189-nau8825.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8189 ASoC sound card + +maintainers: + - Darren Ye <darren.ye@mediatek.com> + - Cyril Chao <cyril.chao@mediatek.com> + +allOf: + - $ref: sound-card-common.yaml# + +properties: + compatible: + enum: + - mediatek,mt8189-nau8825 + - mediatek,mt8189-rt5650 + - mediatek,mt8189-rt5682s + - mediatek,mt8189-rt5682i + - mediatek,mt8189-es8326 + + mediatek,platform: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of MT8189 ASoC platform. + +patternProperties: + "^dai-link-[0-9]+$": + type: object + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: + This property corresponds to the name of the BE dai-link to which + we are going to update parameters in this node. + enum: + - TDM_DPTX_BE + - I2SOUT0_BE + - I2SIN0_BE + - I2SOUT1_BE + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format. + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + enum: + - cpu + - codec + + additionalProperties: false + + required: + - link-name + +required: + - compatible + - mediatek,platform + +unevaluatedProperties: false + +examples: + - | + sound { + compatible = "mediatek,mt8189-nau8825"; + model = "mt8189_rt9123_8825"; + mediatek,platform = <&afe>; + dai-link-0 { + link-name = "I2SOUT1_BE"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&nau8825>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml deleted file mode 100644 index 7ccfbb8d8b04..000000000000 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Nuvoton Technology Corporation NAU85L40 Audio CODEC - -maintainers: - - John Hsu <KCHSU0@nuvoton.com> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nuvoton,nau8540 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1c { - compatible = "nuvoton,nau8540"; - reg = <0x1c>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml deleted file mode 100644 index d9696f6c75ed..000000000000 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NAU8810/NAU8812/NAU8814 audio CODEC - -maintainers: - - David Lin <CTLIN0@nuvoton.com> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - nuvoton,nau8810 - - nuvoton,nau8812 - - nuvoton,nau8814 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - #sound-dai-cells = <0>; - compatible = "nuvoton,nau8810"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index b32f33214ba6..2ce4049f94ac 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -67,46 +67,72 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false -if: - properties: - compatible: - contains: - const: nvidia,tegra210-admaif - -then: - properties: - dmas: - description: - DMA channel specifiers, equally divided for Tx and Rx. - minItems: 1 - maxItems: 20 - dma-names: - items: - pattern: "^[rt]x(10|[1-9])$" - description: - Should be "rx1", "rx2" ... "rx10" for DMA Rx channel - Should be "tx1", "tx2" ... "tx10" for DMA Tx channel - minItems: 1 - maxItems: 20 - interconnects: false - interconnect-names: false - iommus: false - -else: - properties: - dmas: - description: - DMA channel specifiers, equally divided for Tx and Rx. - minItems: 1 - maxItems: 40 - dma-names: - items: - pattern: "^[rt]x(1[0-9]|[1-9]|20)$" - description: - Should be "rx1", "rx2" ... "rx20" for DMA Rx channel - Should be "tx1", "tx2" ... "tx20" for DMA Tx channel - minItems: 1 - maxItems: 40 +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 20 + dma-names: + items: + pattern: "^[rt]x(10|[1-9])$" + description: + Should be "rx1", "rx2" ... "rx10" for DMA Rx channel + Should be "tx1", "tx2" ... "tx10" for DMA Tx channel + minItems: 1 + maxItems: 20 + interconnects: false + interconnect-names: false + iommus: false + + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 40 + dma-names: + items: + pattern: "^[rt]x(1[0-9]|[1-9]|20)$" + description: + Should be "rx1", "rx2" ... "rx20" for DMA Rx channel + Should be "tx1", "tx2" ... "tx20" for DMA Tx channel + minItems: 1 + maxItems: 40 + + - if: + properties: + compatible: + contains: + const: nvidia,tegra264-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 64 + dma-names: + items: + pattern: "^[rt]x(3[0-2]|[1-2][0-9]|[1-9])$" + description: + Should be "rx1", "rx2" ... "rx32" for DMA Rx channel + Should be "tx1", "tx2" ... "tx32" for DMA Tx channel + minItems: 1 + maxItems: 64 required: - compatible diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml deleted file mode 100644 index df26248573ad..000000000000 --- a/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml +++ /dev/null @@ -1,44 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nxp,tfa9879.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP TFA9879 class-D audio amplifier - -maintainers: - - Peter Rosin <peda@axentia.se> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nxp,tfa9879 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c1 { - #address-cells = <1>; - #size-cells = <0>; - amplifier@6c { - compatible = "nxp,tfa9879"; - reg = <0x6c>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml b/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml deleted file mode 100644 index 71c6a5a2f5bc..000000000000 --- a/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nxp,uda1342.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP uda1342 audio CODECs - -maintainers: - - Binbin Zhou <zhoubinbin@loongson.cn> - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nxp,uda1342 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "nxp,uda1342"; - reg = <0x1a>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm1789.txt b/Documentation/devicetree/bindings/sound/pcm1789.txt deleted file mode 100644 index 3c74ed220ac2..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm1789.txt +++ /dev/null @@ -1,22 +0,0 @@ -Texas Instruments pcm1789 DT bindings - -PCM1789 is a simple audio codec that can be connected via -I2C or SPI. Currently, only I2C bus is supported. - -Required properties: - - - compatible: "ti,pcm1789" - -Required properties on I2C: - - - reg: the I2C address - - reset-gpios: GPIO to control the RESET pin - -Examples: - - audio-codec@4c { - compatible = "ti,pcm1789"; - reg = <0x4c>; - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm179x.txt b/Documentation/devicetree/bindings/sound/pcm179x.txt deleted file mode 100644 index 436c2b247693..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm179x.txt +++ /dev/null @@ -1,27 +0,0 @@ -Texas Instruments pcm179x DT bindings - -This driver supports both the I2C and SPI bus. - -Required properties: - - - compatible: "ti,pcm1792a" - -For required properties on SPI, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Required properties on I2C: - - - reg: the I2C address - - -Examples: - - codec_spi: 1792a@0 { - compatible = "ti,pcm1792a"; - spi-max-frequency = <600000>; - }; - - codec_i2c: 1792a@4c { - compatible = "ti,pcm1792a"; - reg = <0x4c>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm186x.txt b/Documentation/devicetree/bindings/sound/pcm186x.txt deleted file mode 100644 index 1087f4855980..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm186x.txt +++ /dev/null @@ -1,42 +0,0 @@ -Texas Instruments PCM186x Universal Audio ADC - -These devices support both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "ti,pcm1862", - "ti,pcm1863", - "ti,pcm1864", - "ti,pcm1865" - - - reg : The I2C address of the device for I2C, the chip select - number for SPI. - - - avdd-supply: Analog core power supply (3.3v) - - dvdd-supply: Digital core power supply - - iovdd-supply: Digital IO power supply - See regulator/regulator.txt for more information - -CODEC input pins: - * VINL1 - * VINR1 - * VINL2 - * VINR2 - * VINL3 - * VINR3 - * VINL4 - * VINR4 - -The pins can be used in referring sound node's audio-routing property. - -Example: - - pcm186x: audio-codec@4a { - compatible = "ti,pcm1865"; - reg = <0x4a>; - - avdd-supply = <®_3v3_analog>; - dvdd-supply = <®_3v3>; - iovdd-supply = <®_1v8>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm5102a.txt b/Documentation/devicetree/bindings/sound/pcm5102a.txt deleted file mode 100644 index c63ab0b6ee19..000000000000 --- a/Documentation/devicetree/bindings/sound/pcm5102a.txt +++ /dev/null @@ -1,13 +0,0 @@ -PCM5102a audio CODECs - -These devices does not use I2C or SPI. - -Required properties: - - - compatible : set as "ti,pcm5102a" - -Examples: - - pcm5102a: pcm5102a { - compatible = "ti,pcm5102a"; - }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 92f95eb74b19..2eed2277511f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -14,12 +14,14 @@ properties: oneOf: - enum: - qcom,sc7280-lpass-rx-macro + - qcom,sm6115-lpass-rx-macro - qcom,sm8250-lpass-rx-macro - qcom,sm8450-lpass-rx-macro - qcom,sm8550-lpass-rx-macro - qcom,sc8280xp-lpass-rx-macro - items: - enum: + - qcom,kaanapali-lpass-rx-macro - qcom,sm8650-lpass-rx-macro - qcom,sm8750-lpass-rx-macro - qcom,x1e80100-lpass-rx-macro @@ -84,6 +86,23 @@ allOf: properties: compatible: enum: + - qcom,sm6115-lpass-rx-macro + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: mclk + - const: npl + - const: dcodec + - const: fsgen + + - if: + properties: + compatible: + enum: - qcom,sc8280xp-lpass-rx-macro - qcom,sm8250-lpass-rx-macro - qcom,sm8450-lpass-rx-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 914798a89878..e5e65e226a02 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -21,6 +21,7 @@ properties: - qcom,sc8280xp-lpass-tx-macro - items: - enum: + - qcom,kaanapali-lpass-tx-macro - qcom,sm8650-lpass-tx-macro - qcom,sm8750-lpass-tx-macro - qcom,x1e80100-lpass-tx-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 1c0d78af3c05..5c42b2b323ee 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -14,6 +14,7 @@ properties: oneOf: - enum: - qcom,sc7280-lpass-va-macro + - qcom,sm6115-lpass-va-macro - qcom,sm8250-lpass-va-macro - qcom,sm8450-lpass-va-macro - qcom,sm8550-lpass-va-macro @@ -21,6 +22,7 @@ properties: - items: - enum: - qcom,glymur-lpass-va-macro + - qcom,kaanapali-lpass-va-macro - qcom,sm8650-lpass-va-macro - qcom,sm8750-lpass-va-macro - qcom,x1e80100-lpass-va-macro @@ -41,11 +43,7 @@ properties: clock-names: minItems: 1 - items: - - const: mclk - - const: macro - - const: dcodec - - const: npl + maxItems: 4 clock-output-names: maxItems: 1 @@ -90,29 +88,48 @@ allOf: clocks: maxItems: 1 clock-names: - maxItems: 1 + items: + - const: mclk else: properties: clocks: minItems: 3 maxItems: 3 clock-names: - minItems: 3 - maxItems: 3 - + items: + - const: mclk + - const: macro + - const: dcodec - if: properties: compatible: contains: - const: qcom,sm8250-lpass-va-macro + const: qcom,sm6115-lpass-va-macro then: properties: clocks: minItems: 3 maxItems: 3 clock-names: + items: + - const: mclk + - const: dcodec + - const: npl + - if: + properties: + compatible: + contains: + const: qcom,sm8250-lpass-va-macro + then: + properties: + clocks: minItems: 3 maxItems: 3 + clock-names: + items: + - const: mclk + - const: macro + - const: dcodec - if: properties: @@ -127,8 +144,11 @@ allOf: minItems: 4 maxItems: 4 clock-names: - minItems: 4 - maxItems: 4 + items: + - const: mclk + - const: macro + - const: dcodec + - const: npl - if: properties: @@ -142,8 +162,10 @@ allOf: minItems: 3 maxItems: 3 clock-names: - minItems: 3 - maxItems: 3 + items: + - const: mclk + - const: macro + - const: dcodec unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index b6f5ba5d1320..d5f22b5cf021 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,glymur-lpass-wsa-macro + - qcom,kaanapali-lpass-wsa-macro - qcom,sm8650-lpass-wsa-macro - qcom,sm8750-lpass-wsa-macro - qcom,x1e80100-lpass-wsa-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml index 3f11d2e183e1..26fe8cc66b3c 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Device Manager (Q6ADM) routing maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml index fe14a97ea616..3c32c5b0fad8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Device Manager (Q6ADM) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml index 268f7073d797..4624b3d461d5 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio FrontEnd (Q6AFE) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml index 894e653d37d7..2fb95544db8b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS (Low Power Audio SubSystem) Audio Ports maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml index ef1965aca254..ec06769a2b63 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Process Manager (Q6APM) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml index ce811942a9f1..47a105a97ecf 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Stream Manager (Q6ASM) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml index cb49f9667cca..a6f88ce92299 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Stream Manager (Q6ASM) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.yaml b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml index e240712de9ca..8642ef9f9142 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6core.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Core (Q6Core) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml index f6dbb1267bfe..3eafe189e699 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Proxy Resource Manager (Q6PRM) maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index b49a920af704..15f38622b98b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -23,6 +23,7 @@ properties: - const: qcom,sdm845-sndcard - items: - enum: + - qcom,kaanapali-sndcard - qcom,sm8550-sndcard - qcom,sm8650-sndcard - qcom,sm8750-sndcard @@ -38,6 +39,7 @@ properties: - qcom,qcs8275-sndcard - qcom,qcs9075-sndcard - qcom,qcs9100-sndcard + - qcom,qrb2210-sndcard - qcom,qrb4210-rb2-sndcard - qcom,qrb5165-rb5-sndcard - qcom,sc7180-qdsp6-sndcard diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index a65b1d1d5fdd..3a7334e41fd6 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -132,7 +132,7 @@ properties: $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml# patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object additionalProperties: true description: | diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml index 83e0360301e1..866c5e780fb0 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> description: diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml index 7bb6c5dff786..9435f395403a 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml @@ -135,7 +135,6 @@ properties: the direction (input/output) needs to be dynamically adjusted. type: boolean - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml index 5cdb8bcc687b..52e3f1f900c4 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -8,10 +8,10 @@ title: Rockchip rk3328 internal codec maintainers: - Heiko Stuebner <heiko@sntech.de> + allOf: - $ref: dai-common.yaml# - properties: compatible: const: rockchip,rk3328-codec diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml index cbc7ba37362a..67586ba3e0a0 100644 --- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml @@ -30,7 +30,6 @@ properties: - items: - description: Phandle to the HDMI transmitter node. - samsung,audio-routing: description: | List of the connections between audio components; each entry is diff --git a/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml b/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml new file mode 100644 index 000000000000..55bd0b307d22 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/spacemit,k1-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: K1 I2S controller + +description: + The I2S bus (Inter-IC sound bus) is a serial link for digital + audio data transfer between devices in the system. + +maintainers: + - Troy Mitchell <troy.mitchell@linux.spacemit.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: spacemit,k1-i2s + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for I2S sysclk + - description: clock for I2S bclk + - description: clock for I2S bus + - description: clock for I2S controller + + clock-names: + items: + - const: sysclk + - const: bclk + - const: bus + - const: func + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + items: + - const: tx + - const: rx + + resets: + maxItems: 1 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - dmas + - dma-names + - resets + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/spacemit,k1-syscon.h> + i2s@d4026000 { + compatible = "spacemit,k1-i2s"; + reg = <0xd4026000 0x30>; + clocks = <&syscon_mpmu CLK_I2S_SYSCLK>, + <&syscon_mpmu CLK_I2S_BCLK>, + <&syscon_apbc CLK_SSPA0_BUS>, + <&syscon_apbc CLK_SSPA0>; + clock-names = "sysclk", "bclk", "bus", "func"; + dmas = <&pdma0 21>, <&pdma0 22>; + dma-names = "tx", "rx"; + resets = <&syscon_apbc RESET_SSPA0>; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml b/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml new file mode 100644 index 000000000000..0f0e254a2420 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,pcm1862.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments PCM186x Universal Audio ADC + +maintainers: + - Ranganath V N <vnranganath.20@gmail.com> + +description: | + The Texas Instruments PCM186x family are multi-channel audio ADCs + that support both I2C and SPI control interfaces, selected by + pin strapping. These devices include on-chip programmable gain + amplifiers and support differential or single-ended analog inputs. + + CODEC input pins: + * VINL1 + * VINR1 + * VINL2 + * VINR2 + * VINL3 + * VINR3 + * VINL4 + * VINR4 + + The pins can be used in referring sound node's audio-routing property. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,pcm1862 + - ti,pcm1863 + - ti,pcm1864 + - ti,pcm1865 + + reg: + maxItems: 1 + + avdd-supply: true + + dvdd-supply: true + + iovdd-supply: true + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - iovdd-supply + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@4a { + compatible = "ti,pcm1865"; + reg = <0x4a>; + + avdd-supply = <®_3v3_analog>; + dvdd-supply = <®_3v3>; + iovdd-supply = <®_1v8>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index 7f84f506013c..f3a5638f4239 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -24,21 +24,26 @@ description: | Instruments Smart Amp speaker protection algorithm. The integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. - The TAS5802/TAS5815/TAS5825/TAS5827/TAS5828 is a stereo, digital input - Class-D audio amplifier optimized for efficiently driving high peak - power into small loudspeakers. An integrated on-chip DSP supports - Texas Instruments Smart Amp speaker protection algorithm. + The TAS5802/TAS5815/TAS5822/TAS5825/TAS5827/TAS5828 is a stereo, + digital input Class-D audio amplifier optimized for efficiently driving + high peak power into small loudspeakers. An integrated on-chip DSP + supports Texas Instruments Smart Amp speaker protection algorithm. Specifications about the audio amplifier can be found at: https://www.ti.com/lit/gpn/tas2120 https://www.ti.com/lit/gpn/tas2320 https://www.ti.com/lit/gpn/tas2563 https://www.ti.com/lit/gpn/tas2572 + https://www.ti.com/lit/gpn/tas2574 https://www.ti.com/lit/gpn/tas2781 + https://www.ti.com/lit/gpn/tas5806m + https://www.ti.com/lit/gpn/tas5806md https://www.ti.com/lit/gpn/tas5815 + https://www.ti.com/lit/gpn/tas5822m https://www.ti.com/lit/gpn/tas5825m https://www.ti.com/lit/gpn/tas5827 https://www.ti.com/lit/gpn/tas5828m + https://www.ti.com/lit/gpn/tas5830 properties: compatible: @@ -57,12 +62,18 @@ properties: ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM. + ti,tas2568: 5.3-W Digital Input Smart Amp with I/V Sense and Integrated + 10.75-V Class-H Boost + ti,tas2570: 5.8-W Digital Input smart amp with I/V sense and integrated 11-V Class-H Boost ti,tas2572: 6.6-W Digital Input smart amp with I/V sense and integrated 13-V Class-H Boost + ti,tas2574: 8.5-W Digital Input smart amp with I/V sense and integrated + 15-V Class-H Boost + ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker Protection and Audio Processing, 16/20/24/32bit stereo I2S or multichannel TDM. @@ -71,9 +82,20 @@ properties: Audio Amplifier with 96-Khz Extended Processing and Low Idle Power Dissipation. + ti,tas5806m: 23-W, Inductor-Less, Digital Input, Stereo, Closed-Loop + Class-D Audio Amplifier with Enhanced Processing and Low Power + Dissipation. + + ti,tas5806md: 23-W, Inductor-Less, Digital Input, Stereo, Closed-Loop + Class-D Audio Amplifier with Enhanced Processing and DirectPath(TM) + HP Driver + ti,tas5815: 30-W, Digital Input, Stereo, Closed-loop Class-D Audio Amplifier with 96 kHz Enhanced Processing + ti,tas5822: 35-W, Digital Input, Stereo, Closed-Loop Class-D Audio + Amplifier with 96 kHz Enhanced Processing + ti,tas5825: 38-W Stereo, Inductor-Less, Digital Input, Closed-Loop 4.5V to 26.4V Class-D Audio Amplifier with 192-kHz Extended Audio Processing. @@ -82,6 +104,9 @@ properties: ti,tas5828: 50-W Stereo, Digital Input, High Efficiency Closed-Loop Class-D Amplifier with Hybrid-Pro Algorithm + + ti,tas5830: 65-W Stereo, Digital Input, High Efficiency Closed-Loop + Class-D Amplifier with Class-H Algorithm oneOf: - items: - enum: @@ -90,13 +115,19 @@ properties: - ti,tas2120 - ti,tas2320 - ti,tas2563 + - ti,tas2568 - ti,tas2570 - ti,tas2572 + - ti,tas2574 - ti,tas5802 + - ti,tas5806m + - ti,tas5806md - ti,tas5815 + - ti,tas5822 - ti,tas5825 - ti,tas5827 - ti,tas5828 + - ti,tas5830 - const: ti,tas2781 - enum: - ti,tas2781 @@ -132,6 +163,8 @@ allOf: - ti,tas2118 - ti,tas2120 - ti,tas2320 + - ti,tas2568 + - ti,tas2574 then: properties: reg: @@ -212,8 +245,25 @@ allOf: compatible: contains: enum: + - ti,tas5806m + - ti,tas5806md + - ti,tas5822 + then: + properties: + reg: + maxItems: 4 + items: + minimum: 0x2c + maximum: 0x2f + + - if: + properties: + compatible: + contains: + enum: - ti,tas5827 - ti,tas5828 + - ti,tas5830 then: properties: reg: diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml index 85e937e34962..10299064cbc6 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml @@ -84,7 +84,6 @@ properties: description: gpio pin number used for codec reset deprecated: true - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/trivial-codec.yaml b/Documentation/devicetree/bindings/sound/trivial-codec.yaml new file mode 100644 index 000000000000..9a35dfb17349 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/trivial-codec.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/trivial-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial Audio Codec + +maintainers: + - Rob Herring <robh@kernel.org> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + # Analog Devices SSM2602 I2S audio CODEC devices + - adi,ssm2602 + - adi,ssm2603 + - adi,ssm2604 + - adi,ssm3515 + # Cirrus Logic CS4265 audio DAC + - cirrus,cs4265 + - cirrus,cs4341a + - cirrus,cs4349 + - dlg,da9055-codec + # Nuvoton Technology Corporation NAU85L40 Audio CODEC + - nuvoton,nau8540 + - nuvoton,nau8810 + - nuvoton,nau8812 + - nuvoton,nau8814 + # NXP TFA9879 class-D audio amplifier + - nxp,tfa9879 + - nxp,uda1342 + - sdw3019f836300 + - ti,pcm1789 + - ti,pcm1792a + - ti,pcm5102a + - wlf,wm8510 + - wlf,wm8523 + - wlf,wm8580 + - wlf,wm8581 + - wlf,wm8711 + - wlf,wm8728 + - wlf,wm8737 + - wlf,wm8750 + - wlf,wm8753 + - wlf,wm8770 + - wlf,wm8776 + - wlf,wm8961 + - wlf,wm8974 + - wlf,wm8987 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "wlf,wm8523"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml deleted file mode 100644 index 6d12b0ac37e2..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8510.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8510 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8510 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8510"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml deleted file mode 100644 index decc395bb873..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8523.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8523 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8523 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8523"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml deleted file mode 100644 index 2f27852cdc20..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8580.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8580 and WM8581 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - wlf,wm8580 - - wlf,wm8581 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8580"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml deleted file mode 100644 index ecaac2818b44..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8711.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8711 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8711 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8711"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml deleted file mode 100644 index fc89475a051e..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8728.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8728 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8728 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8728"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml deleted file mode 100644 index 12d8765726d8..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8737.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8737 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8737 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8737"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml deleted file mode 100644 index 96859e38315b..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8750.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8750 and WM8987 audio CODECs - -description: | - These devices support both I2C and SPI (configured with pin strapping - on the board). - -maintainers: - - Mark Brown <broonie@kernel.org> - -properties: - compatible: - enum: - - wlf,wm8750 - - wlf,wm8987 - - reg: - description: - The I2C address of the device for I2C, the chip select number for SPI - maxItems: 1 - -additionalProperties: false - -required: - - reg - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8750"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml deleted file mode 100644 index 9eebe7d7f0b7..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml +++ /dev/null @@ -1,62 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8753.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8753 audio CODEC - -description: | - Pins on the device (for linking into audio routes): - * LOUT1 - * LOUT2 - * ROUT1 - * ROUT2 - * MONO1 - * MONO2 - * OUT3 - * OUT4 - * LINE1 - * LINE2 - * RXP - * RXN - * ACIN - * ACOP - * MIC1N - * MIC1 - * MIC2N - * MIC2 - * Mic Bias - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8753 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8753"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml deleted file mode 100644 index 7bbc96ee81be..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8776.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8776 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8776 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8776"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml index 4cfa66f62681..089b67384797 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml @@ -75,7 +75,6 @@ properties: DCVDD-supply: description: Digital core supply regulator for the DCVDD pin. - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml deleted file mode 100644 index f58078545569..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml +++ /dev/null @@ -1,43 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8961.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Wolfson WM8961 Ultra-Low Power Stereo CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8961 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - wm8961: codec@4a { - compatible = "wlf,wm8961"; - reg = <0x4a>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml deleted file mode 100644 index d27300207c67..000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8974.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8974 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8974 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8974"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml index 8f045de02850..0db04a90ac6b 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Wolfson WM1811/WM8994/WM8958 audio codecs maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> - patches@opensource.cirrus.com description: | diff --git a/Documentation/devicetree/bindings/sound/wm8770.txt b/Documentation/devicetree/bindings/sound/wm8770.txt deleted file mode 100644 index cac762a1105d..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8770.txt +++ /dev/null @@ -1,16 +0,0 @@ -WM8770 audio CODEC - -This device supports SPI. - -Required properties: - - - compatible : "wlf,wm8770" - - - reg : the chip select number. - -Example: - -wm8770: codec@1 { - compatible = "wlf,wm8770"; - reg = <1>; -}; diff --git a/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml b/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml index b820c5613dcc..855aa08995b9 100644 --- a/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml +++ b/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml @@ -14,7 +14,12 @@ allOf: properties: compatible: - const: airoha,en7581-snand + oneOf: + - const: airoha,en7581-snand + - items: + - enum: + - airoha,en7523-snand + - const: airoha,en7581-snand reg: items: diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml index 57d932af4506..80e542624cc6 100644 --- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml @@ -12,7 +12,7 @@ maintainers: description: | This binding describes the Aspeed Static Memory Controllers (FMC and - SPI) of the AST2400, AST2500 and AST2600 SOCs. + SPI) of the AST2400, AST2500, AST2600 and AST2700 SOCs. allOf: - $ref: spi-controller.yaml# @@ -20,6 +20,8 @@ allOf: properties: compatible: enum: + - aspeed,ast2700-fmc + - aspeed,ast2700-spi - aspeed,ast2600-fmc - aspeed,ast2600-spi - aspeed,ast2500-fmc diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml index f2dd20370dbb..1d10cfbad86c 100644 --- a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml @@ -9,9 +9,6 @@ title: Freescale Quad Serial Peripheral Interface (QuadSPI) maintainers: - Han Xu <han.xu@nxp.com> -allOf: - - $ref: spi-controller.yaml# - properties: compatible: oneOf: @@ -22,6 +19,7 @@ properties: - fsl,imx6ul-qspi - fsl,ls1021a-qspi - fsl,ls2080a-qspi + - spacemit,k1-qspi - items: - enum: - fsl,ls1043a-qspi @@ -54,6 +52,11 @@ properties: - const: qspi_en - const: qspi + resets: + items: + - description: SoC QSPI reset + - description: SoC QSPI bus reset + required: - compatible - reg @@ -62,6 +65,18 @@ required: - clocks - clock-names +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + not: + contains: + const: spacemit,k1-qspi + then: + properties: + resets: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml index 62a568bdbfa0..636338d24bdf 100644 --- a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml +++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml @@ -21,11 +21,13 @@ properties: - microchip,mpfs-qspi - microchip,pic64gx-qspi - const: microchip,coreqspi-rtl-v2 - - const: microchip,coreqspi-rtl-v2 # FPGA QSPI + - enum: + - microchip,coreqspi-rtl-v2 # FPGA QSPI + - microchip,corespi-rtl-v5 # FPGA CoreSPI + - microchip,mpfs-spi - items: - const: microchip,pic64gx-spi - const: microchip,mpfs-spi - - const: microchip,mpfs-spi reg: maxItems: 1 @@ -39,6 +41,45 @@ properties: clocks: maxItems: 1 + microchip,apb-datawidth: + description: APB bus data width in bits. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 32] + default: 8 + + microchip,frame-size: + description: | + Number of bits per SPI frame, as configured in Libero. + In Motorola and TI modes, this corresponds directly + to the requested frame size. For NSC mode this is set + to 9 + the required data frame size. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4 + maximum: 32 + default: 8 + + microchip,protocol-configuration: + description: CoreSPI protocol selection. Determines operating mode + $ref: /schemas/types.yaml#/definitions/string + enum: + - motorola + - ti + - nsc + default: motorola + + microchip,motorola-mode: + description: Motorola SPI mode selection + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 + + microchip,ssel-active: + description: | + Keep SSEL asserted between frames when using the Motorola protocol. + When present, the controller keeps SSEL active across contiguous + transfers and deasserts only when the overall transfer completes. + type: boolean + required: - compatible - reg @@ -71,6 +112,31 @@ allOf: num-cs: maximum: 1 + - if: + properties: + compatible: + contains: + const: microchip,corespi-rtl-v5 + then: + properties: + num-cs: + minimum: 1 + maximum: 8 + default: 8 + + fifo-depth: + minimum: 1 + maximum: 32 + default: 4 + + else: + properties: + microchip,apb-datawidth: false + microchip,frame-size: false + microchip,protocol-configuration: false + microchip,motorola-mode: false + microchip,ssel-active: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt deleted file mode 100644 index a4e72e52af59..000000000000 --- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt +++ /dev/null @@ -1,36 +0,0 @@ -Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver - -Nuvoton NPCM7xx SOC support two PSPI channels. - -Required properties: - - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX. - "nuvoton,npcm845-pspi" for Arbel NPCM8XX. - - #address-cells : should be 1. see spi-bus.txt - - #size-cells : should be 0. see spi-bus.txt - - specifies physical base address and size of the register. - - interrupts : contain PSPI interrupt. - - clocks : phandle of PSPI reference clock. - - clock-names: Should be "clk_apb5". - - pinctrl-names : a pinctrl state named "default" must be defined. - - pinctrl-0 : phandle referencing pin configuration of the device. - - resets : phandle to the reset control for this device. - - cs-gpios: Specifies the gpio pins to be used for chipselects. - See: Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: -- clock-frequency : Input clock frequency to the PSPI block in Hz. - Default is 25000000 Hz. - -spi0: spi@f0200000 { - compatible = "nuvoton,npcm750-pspi"; - reg = <0xf0200000 0x1000>; - pinctrl-names = "default"; - pinctrl-0 = <&pspi1_pins>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk NPCM7XX_CLK_APB5>; - clock-names = "clk_apb5"; - resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1> - cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml new file mode 100644 index 000000000000..db0fb872020a --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nuvoton,npcm-pspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Peripheral SPI (PSPI) Controller + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +allOf: + - $ref: spi-controller.yaml# + +description: + Nuvoton NPCM Peripheral Serial Peripheral Interface (PSPI) controller. + Nuvoton NPCM7xx SOC supports two PSPI channels. + Nuvoton NPCM8xx SOC support one PSPI channel. + +properties: + compatible: + enum: + - nuvoton,npcm750-pspi # Poleg NPCM7XX + - nuvoton,npcm845-pspi # Arbel NPCM8XX + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: PSPI reference clock. + + clock-names: + items: + - const: clk_apb5 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + #include "dt-bindings/gpio/gpio.h" + spi0: spi@f0200000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0xf0200000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi1_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml index d12c5a060ed0..edf399681d7a 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -9,7 +9,7 @@ title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interfac maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The QUP v3 core is a GENI based AHB slave that provides a common data path diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml index cb1f15224b45..7d0571feb46d 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml @@ -25,6 +25,8 @@ properties: - items: - enum: - qcom,ipq5018-snand + - qcom,ipq5332-snand + - qcom,ipq5424-snand - const: qcom,ipq9574-snand - const: qcom,ipq9574-snand diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml index 88be13268962..7df21b15a0d4 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -9,7 +9,7 @@ title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) maintainers: - Andy Gross <agross@kernel.org> - Bjorn Andersson <bjorn.andersson@linaro.org> - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> description: The QUP core is an AHB slave that provides a common data path (an output FIFO diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml index ab27fefc3c3a..069557a587b5 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml @@ -9,12 +9,18 @@ title: Renesas RZ/V2H(P) Renesas Serial Peripheral Interface (RSPI) maintainers: - Fabrizio Castro <fabrizio.castro.jz@renesas.com> -allOf: - - $ref: spi-controller.yaml# - properties: compatible: - const: renesas,r9a09g057-rspi # RZ/V2H(P) + oneOf: + - enum: + - renesas,r9a09g057-rspi # RZ/V2H(P) + - renesas,r9a09g077-rspi # RZ/T2H + - items: + - const: renesas,r9a09g056-rspi # RZ/V2N + - const: renesas,r9a09g057-rspi + - items: + - const: renesas,r9a09g087-rspi # RZ/N2H + - const: renesas,r9a09g077-rspi # RZ/T2H reg: maxItems: 1 @@ -36,13 +42,12 @@ properties: - const: tx clocks: + minItems: 2 maxItems: 3 clock-names: - items: - - const: pclk - - const: pclk_sfr - - const: tclk + minItems: 2 + maxItems: 3 resets: maxItems: 2 @@ -62,12 +67,52 @@ required: - interrupt-names - clocks - clock-names - - resets - - reset-names - power-domains - '#address-cells' - '#size-cells' +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a09g057-rspi + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: pclk + - const: pclk_sfr + - const: tclk + + required: + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a09g077-rspi + then: + properties: + clocks: + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: pclkspi + + resets: false + reset-names: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 0543c526b783..5c87fc8a845d 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -153,7 +153,7 @@ properties: provides an interface to override the native DWC SSI CS control. patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index 27414b78d61d..347bed0c4956 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -21,6 +21,7 @@ properties: - enum: - xlnx,zynqmp-spi-r1p6 - xlnx,versal-net-spi-r1p6 + - cix,sky1-spi-r1p6 - const: cdns,spi-r1p6 reg: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 82d051f7bd6e..3b8e990e30c4 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -111,7 +111,7 @@ properties: - compatible patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object $ref: spi-peripheral-props.yaml additionalProperties: true diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt deleted file mode 100644 index 12fc4ef04837..000000000000 --- a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt +++ /dev/null @@ -1,33 +0,0 @@ -Amazon's Annapurna Labs Thermal Sensor - -Simple thermal device that allows temperature reading by a single MMIO -transaction. - -Required properties: -- compatible: "amazon,al-thermal". -- reg: The physical base address and length of the sensor's registers. -- #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Example: - thermal: thermal { - compatible = "amazon,al-thermal"; - reg = <0x0 0x05002860 0x0 0x1>; - #thermal-sensor-cells = <0x1>; - }; - - thermal-zones { - thermal-z0 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal 0>; - trips { - critical { - temperature = <105000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - }; - }; - diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.yaml b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.yaml new file mode 100644 index 000000000000..6b5884d74dd6 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/amazon,al-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amazon Annapurna Labs Thermal Sensor + +maintainers: + - Talel Shenhar <talel@amazon.com> + +description: + Simple thermal device that allows temperature reading by a single MMIO + transaction. + +properties: + compatible: + items: + - const: amazon,al-thermal + + reg: + maxItems: 1 + + '#thermal-sensor-cells': + const: 1 + +additionalProperties: false + +examples: + - | + thermal: thermal@5002860 { + compatible = "amazon,al-thermal"; + reg = <0x05002860 0x1>; + #thermal-sensor-cells = <0x1>; + }; + + thermal-zones { + z0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal 0>; + trips { + critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt deleted file mode 100644 index 3ab330219d45..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt +++ /dev/null @@ -1,105 +0,0 @@ -* Broadcom Stingray Thermal - -This binding describes thermal sensors that is part of Stingray SoCs. - -Required properties: -- compatible : Must be "brcm,sr-thermal" -- reg : Memory where tmon data will be available. -- brcm,tmon-mask: A one cell bit mask of valid TMON sources. - Each bit represents single TMON source. -- #thermal-sensor-cells : Thermal sensor phandler -- polling-delay: Max number of milliseconds to wait between polls. -- thermal-sensors: A list of thermal sensor phandles and specifier. - specifier value is tmon ID and it should be - in correspond with brcm,tmon-mask. -- temperature: trip temperature threshold in millicelsius. - -Example: - tmons { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x8f100000 0x100>; - - tmon: tmon@0 { - compatible = "brcm,sr-thermal"; - reg = <0x0 0x40>; - brcm,tmon-mask = <0x3f>; - #thermal-sensor-cells = <1>; - }; - }; - - thermal-zones { - ihost0_thermal: ihost0-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 0>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - ihost1_thermal: ihost1-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 1>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - ihost2_thermal: ihost2-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 2>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - ihost3_thermal: ihost3-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 3>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - crmu_thermal: crmu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 4>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - nitro_thermal: nitro-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 5>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.yaml new file mode 100644 index 000000000000..576a627cd599 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,sr-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray Thermal Sensors + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + const: brcm,sr-thermal + + reg: + maxItems: 1 + + brcm,tmon-mask: + description: + A one-cell bit mask of valid TMON sources. Each bit represents a single + TMON source. + $ref: /schemas/types.yaml#/definitions/uint32 + + '#thermal-sensor-cells': + const: 1 + +required: + - compatible + - reg + - brcm,tmon-mask + +additionalProperties: false + +examples: + - | + tmon: thermal-sensor@0 { + compatible = "brcm,sr-thermal"; + reg = <0x0 0x40>; + brcm,tmon-mask = <0x3f>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + ihost0_thermal: ihost0-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 0>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost1_thermal: ihost1-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 1>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost2_thermal: ihost2-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 2>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost3_thermal: ihost3-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 3>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + crmu_thermal: crmu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 4>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + nitro_thermal: nitro-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 5>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt deleted file mode 100644 index 2e1c06fad81f..000000000000 --- a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt +++ /dev/null @@ -1,44 +0,0 @@ -* ST-Ericsson DB8500 Thermal - -** Thermal node properties: - -- compatible : "stericsson,db8500-thermal"; -- reg : address range of the thermal sensor registers; -- interrupts : interrupts generated from PRCMU; -- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; -- num-trips : number of total trip points, this is required, set it 0 if none, - if greater than 0, the following properties must be defined; -- tripN-temp : temperature of trip point N, should be in ascending order; -- tripN-type : type of trip point N, should be one of "active" "passive" "hot" - "critical"; -- tripN-cdev-num : number of the cooling devices which can be bound to trip - point N, this is required if trip point N is defined, set it 0 if none, - otherwise the following cooling device names must be defined; -- tripN-cdev-nameM : name of the No. M cooling device of trip point N; - -Usually the num-trips and tripN-*** are separated in board related dts files. - -Example: -thermal@801573c0 { - compatible = "stericsson,db8500-thermal"; - reg = <0x801573c0 0x40>; - interrupts = <21 0x4>, <22 0x4>; - interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; - - num-trips = <3>; - - trip0-temp = <75000>; - trip0-type = "active"; - trip0-cdev-num = <1>; - trip0-cdev-name0 = "thermal-cpufreq-0"; - - trip1-temp = <80000>; - trip1-type = "active"; - trip1-cdev-num = <2>; - trip1-cdev-name0 = "thermal-cpufreq-0"; - trip1-cdev-name1 = "thermal-fan"; - - trip2-temp = <85000>; - trip2-type = "critical"; - trip2-cdev-num = <0>; -} diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml index 9ea2ea3a7599..adf208b7a5b9 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml @@ -100,7 +100,6 @@ properties: items: - const: timer - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml index 76516e18e042..1d0bd36907ed 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml @@ -15,7 +15,6 @@ description: > reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be programmed to generate one-shot, periodic, or watchdog interrupts. - properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 58ff948d93c9..057b32048f53 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -43,8 +43,14 @@ properties: - adi,ad5110 # Temperature sensor with integrated fan control - adi,adm1027 + # Analog Devices ADT7410 High Accuracy Digital Temperature Sensor + - adi,adt7410 # Analog Devices ADT7411 Temperature Sensor and 8-channel ADC - adi,adt7411 + # Analog Devices ADT7420 High Accuracy Digital Temperature Sensor + - adi,adt7420 + # Analog Devices ADT7422 High Accuracy Digital Temperature Sensor + - adi,adt7422 # Temperature sensor with integrated fan control - adi,adt7463 # Temperature sensor with integrated fan control @@ -53,6 +59,8 @@ properties: - adi,lt7182s # AMS iAQ-Core VOC Sensor - ams,iaq-core + # Arduino microcontroller interface over SPI on UnoQ board + - arduino,unoq-mcu # Temperature monitoring of Astera Labs PT5161L PCIe retimer - asteralabs,pt5161l # i2c h/w elliptic curve crypto module @@ -297,6 +305,10 @@ properties: - mps,mp2888 # Monolithic Power Systems Inc. multi-phase controller mp2891 - mps,mp2891 + # Monolithic Power Systems Inc. multi-phase controller mp2925 + - mps,mp2925 + # Monolithic Power Systems Inc. multi-phase controller mp2929 + - mps,mp2929 # Monolithic Power Systems Inc. multi-phase controller mp29502 - mps,mp29502 # Monolithic Power Systems Inc. multi-phase controller mp29608 @@ -317,6 +329,8 @@ properties: - mps,mp5998 # Monolithic Power Systems Inc. digital step-down converter mp9941 - mps,mp9941 + # Monolithic Power Systems Inc. digital step-down converter mp9945 + - mps,mp9945 # Temperature sensor with integrated fan control - national,lm63 # Temperature sensor with integrated fan control diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml index 6d3ef364672e..6d3fa2bc9cee 100644 --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -28,7 +28,6 @@ properties: - qcom,pm4125-typec - const: qcom,pmi632-typec - connector: type: object $ref: /schemas/connector/usb-connector.yaml# diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index beab81e462d2..2bac488d2a9a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -176,6 +176,8 @@ patternProperties: description: All Sensors Corporation "^asix,.*": description: ASIX Electronics Corporation + "^asl-tek,.*": + description: ASL Xiamen Technology Co., Ltd. "^aspeed,.*": description: ASPEED Technology Inc. "^asrock,.*": @@ -570,6 +572,8 @@ patternProperties: description: Foxconn Industrial Internet "^firefly,.*": description: Firefly + "^fitipower,.*": + description: Fitipower Integrated Technology Inc. "^flipkart,.*": description: Flipkart Inc. "^focaltech,.*": @@ -835,6 +839,8 @@ patternProperties: description: JOZ BV "^jty,.*": description: JTY + "^jutouch,.*": + description: JuTouch Technology Co., Ltd. "^kam,.*": description: Kamstrup A/S "^karo,.*": @@ -1323,6 +1329,8 @@ patternProperties: description: Raumfeld GmbH "^raydium,.*": description: Raydium Semiconductor Corp. + "^raystar,.*": + description: Raystar Optronics, Inc. "^rda,.*": description: Unisoc Communications, Inc. "^realtek,.*": diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml index dc6af204e8af..a519422c371c 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PM8916 watchdog timer controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> allOf: - $ref: watchdog.yaml# diff --git a/Documentation/driver-api/cxl/allocation/page-allocator.rst b/Documentation/driver-api/cxl/allocation/page-allocator.rst index 7b8fe1b8d5bb..3fa584a248bd 100644 --- a/Documentation/driver-api/cxl/allocation/page-allocator.rst +++ b/Documentation/driver-api/cxl/allocation/page-allocator.rst @@ -41,37 +41,6 @@ To simplify this, the page allocator will prefer :code:`ZONE_MOVABLE` over will fallback to allocate from :code:`ZONE_NORMAL`. -Zone and Node Quirks -==================== -Let's consider a configuration where the local DRAM capacity is largely onlined -into :code:`ZONE_NORMAL`, with no :code:`ZONE_MOVABLE` capacity present. The -CXL capacity has the opposite configuration - all onlined in -:code:`ZONE_MOVABLE`. - -Under the default allocation policy, the page allocator will completely skip -:code:`ZONE_MOVABLE` as a valid allocation target. This is because, as of -Linux v6.15, the page allocator does (approximately) the following: :: - - for (each zone in local_node): - - for (each node in fallback_order): - - attempt_allocation(gfp_flags); - -Because the local node does not have :code:`ZONE_MOVABLE`, the CXL node is -functionally unreachable for direct allocation. As a result, the only way -for CXL capacity to be used is via `demotion` in the reclaim path. - -This configuration also means that if the DRAM ndoe has :code:`ZONE_MOVABLE` -capacity - when that capacity is depleted, the page allocator will actually -prefer CXL :code:`ZONE_MOVABLE` pages over DRAM :code:`ZONE_NORMAL` pages. - -We may wish to invert this priority in future Linux versions. - -If `demotion` and `swap` are disabled, Linux will begin to cause OOM crashes -when the DRAM nodes are depleted. See the reclaim section for more details. - - CGroups and CPUSets =================== Finally, assuming CXL memory is reachable via the page allocation (i.e. onlined diff --git a/Documentation/driver-api/firmware/efi/index.rst b/Documentation/driver-api/firmware/efi/index.rst index 4fe8abba9fc6..5a6b6229592c 100644 --- a/Documentation/driver-api/firmware/efi/index.rst +++ b/Documentation/driver-api/firmware/efi/index.rst @@ -1,11 +1,16 @@ .. SPDX-License-Identifier: GPL-2.0 -============ -UEFI Support -============ +==================================================== +Unified Extensible Firmware Interface (UEFI) Support +==================================================== UEFI stub library functions =========================== .. kernel-doc:: drivers/firmware/efi/libstub/mem.c :internal: + +UEFI Common Platform Error Record (CPER) functions +================================================== + +.. kernel-doc:: drivers/firmware/efi/cper.c diff --git a/Documentation/driver-api/generic_pt.rst b/Documentation/driver-api/generic_pt.rst new file mode 100644 index 000000000000..fd29d1b525e5 --- /dev/null +++ b/Documentation/driver-api/generic_pt.rst @@ -0,0 +1,137 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +Generic Radix Page Table +======================== + +.. kernel-doc:: include/linux/generic_pt/common.h + :doc: Generic Radix Page Table + +.. kernel-doc:: drivers/iommu/generic_pt/pt_defs.h + :doc: Generic Page Table Language + +Usage +===== + +Generic PT is structured as a multi-compilation system. Since each format +provides an API using a common set of names there can be only one format active +within a compilation unit. This design avoids function pointers around the low +level API. + +Instead the function pointers can end up at the higher level API (i.e. +map/unmap, etc.) and the per-format code can be directly inlined into the +per-format compilation unit. For something like IOMMU each format will be +compiled into a per-format IOMMU operations kernel module. + +For this to work the .c file for each compilation unit will include both the +format headers and the generic code for the implementation. For instance in an +implementation compilation unit the headers would normally be included as +follows: + +generic_pt/fmt/iommu_amdv1.c:: + + #include <linux/generic_pt/common.h> + #include "defs_amdv1.h" + #include "../pt_defs.h" + #include "amdv1.h" + #include "../pt_common.h" + #include "../pt_iter.h" + #include "../iommu_pt.h" /* The IOMMU implementation */ + +iommu_pt.h includes definitions that will generate the operations functions for +map/unmap/etc. using the definitions provided by AMDv1. The resulting module +will have exported symbols named like pt_iommu_amdv1_init(). + +Refer to drivers/iommu/generic_pt/fmt/iommu_template.h for an example of how the +IOMMU implementation uses multi-compilation to generate per-format ops structs +pointers. + +The format code is written so that the common names arise from #defines to +distinct format specific names. This is intended to aid debuggability by +avoiding symbol clashes across all the different formats. + +Exported symbols and other global names are mangled using a per-format string +via the NS() helper macro. + +The format uses struct pt_common as the top-level struct for the table, +and each format will have its own struct pt_xxx which embeds it to store +format-specific information. + +The implementation will further wrap struct pt_common in its own top-level +struct, such as struct pt_iommu_amdv1. + +Format functions at the struct pt_common level +---------------------------------------------- + +.. kernel-doc:: include/linux/generic_pt/common.h + :identifiers: +.. kernel-doc:: drivers/iommu/generic_pt/pt_common.h + +Iteration Helpers +----------------- + +.. kernel-doc:: drivers/iommu/generic_pt/pt_iter.h + +Writing a Format +---------------- + +It is best to start from a simple format that is similar to the target. x86_64 +is usually a good reference for something simple, and AMDv1 is something fairly +complete. + +The required inline functions need to be implemented in the format header. +These should all follow the standard pattern of:: + + static inline pt_oaddr_t amdv1pt_entry_oa(const struct pt_state *pts) + { + [..] + } + #define pt_entry_oa amdv1pt_entry_oa + +where a uniquely named per-format inline function provides the implementation +and a define maps it to the generic name. This is intended to make debug symbols +work better. inline functions should always be used as the prototypes in +pt_common.h will cause the compiler to validate the function signature to +prevent errors. + +Review pt_fmt_defaults.h to understand some of the optional inlines. + +Once the format compiles then it should be run through the generic page table +kunit test in kunit_generic_pt.h using kunit. For example:: + + $ tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig amdv1_fmt_test.* + [...] + [11:15:08] Testing complete. Ran 9 tests: passed: 9 + [11:15:09] Elapsed time: 3.137s total, 0.001s configuring, 2.368s building, 0.311s running + +The generic tests are intended to prove out the format functions and give +clearer failures to speed up finding the problems. Once those pass then the +entire kunit suite should be run. + +IOMMU Invalidation Features +--------------------------- + +Invalidation is how the page table algorithms synchronize with a HW cache of the +page table memory, typically called the TLB (or IOTLB for IOMMU cases). + +The TLB can store present PTEs, non-present PTEs and table pointers, depending +on its design. Every HW has its own approach on how to describe what has changed +to have changed items removed from the TLB. + +PT_FEAT_FLUSH_RANGE +~~~~~~~~~~~~~~~~~~~ + +PT_FEAT_FLUSH_RANGE is the easiest scheme to understand. It tries to generate a +single range invalidation for each operation, over-invalidating if there are +gaps of VA that don't need invalidation. This trades off impacted VA for number +of invalidation operations. It does not keep track of what is being invalidated; +however, if pages have to be freed then page table pointers have to be cleaned +from the walk cache. The range can start/end at any page boundary. + +PT_FEAT_FLUSH_RANGE_NO_GAPS +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +PT_FEAT_FLUSH_RANGE_NO_GAPS is similar to PT_FEAT_FLUSH_RANGE; however, it tries +to minimize the amount of impacted VA by issuing extra flush operations. This is +useful if the cost of processing VA is very high, for instance because a +hypervisor is processing the page table with a shadowing algorithm. diff --git a/Documentation/driver-api/gpio/index.rst b/Documentation/driver-api/gpio/index.rst index 87929840e85a..bee58f709b9a 100644 --- a/Documentation/driver-api/gpio/index.rst +++ b/Documentation/driver-api/gpio/index.rst @@ -15,6 +15,7 @@ Contents: legacy-boards drivers-on-gpio bt8xxgpio + pca953x Core ==== diff --git a/Documentation/driver-api/gpio/pca953x.rst b/Documentation/driver-api/gpio/pca953x.rst new file mode 100644 index 000000000000..4bd7cf1120cb --- /dev/null +++ b/Documentation/driver-api/gpio/pca953x.rst @@ -0,0 +1,552 @@ +============================================ +PCA953x I²C GPIO expander compatibility list +============================================ + +:Author: Levente Révész <levente.revesz@eilabs.com> + +I went through all the datasheets and created this note listing +chip functions and register layouts. + +Overview of chips +================= + +Chips with the basic 4 registers +-------------------------------- + +These chips have 4 register banks: input, output, invert and direction. +Each of these banks contains (lines/8) registers, one for each GPIO port. + +Banks offset is always a power of 2: + +- 4 lines -> bank offset is 1 +- 8 lines -> bank offset is 1 +- 16 lines -> bank offset is 2 +- 24 lines -> bank offset is 4 +- 32 lines -> bank offset is 4 +- 40 lines -> bank offset is 8 + +For example, register layout of GPIO expander with 24 lines: + ++------+-----------------+--------+ +| addr | function | bank | ++======+=================+========+ +| 00 | input port0 | | ++------+-----------------+ | +| 01 | input port1 | bank 0 | ++------+-----------------+ | +| 02 | input port2 | | ++------+-----------------+--------+ +| 03 | n/a | | ++------+-----------------+--------+ +| 04 | output port0 | | ++------+-----------------+ | +| 05 | output port1 | bank 1 | ++------+-----------------+ | +| 06 | output port2 | | ++------+-----------------+--------+ +| 07 | n/a | | ++------+-----------------+--------+ +| 08 | invert port0 | | ++------+-----------------+ | +| 09 | invert port1 | bank 2 | ++------+-----------------+ | +| 0A | invert port2 | | ++------+-----------------+--------+ +| 0B | n/a | | ++------+-----------------+--------+ +| 0C | direction port0 | | ++------+-----------------+ | +| 0D | direction port1 | bank 3 | ++------+-----------------+ | +| 0E | direction port2 | | ++------+-----------------+--------+ +| 0F | n/a | | ++------+-----------------+--------+ + +.. note:: + This is followed by all supported chips, except by pcal6534. + +The table below shows the offsets for each of the compatible chips: + +========== ===== ========= ===== ====== ====== ========= +compatible lines interrupt input output invert direction +========== ===== ========= ===== ====== ====== ========= +pca9536 4 no 00 01 02 03 +pca9537 4 yes 00 01 02 03 +pca6408 8 yes 00 01 02 03 +tca6408 8 yes 00 01 02 03 +pca9534 8 yes 00 01 02 03 +pca9538 8 yes 00 01 02 03 +pca9554 8 yes 00 01 02 03 +tca9554 8 yes 00 01 02 03 +pca9556 8 no 00 01 02 03 +pca9557 8 no 00 01 02 03 +pca6107 8 yes 00 01 02 03 +pca6416 16 yes 00 02 04 06 +tca6416 16 yes 00 02 04 06 +pca9535 16 yes 00 02 04 06 +pca9539 16 yes 00 02 04 06 +tca9539 16 yes 00 02 04 06 +pca9555 16 yes 00 02 04 06 +max7318 16 yes 00 02 04 06 +tca6424 24 yes 00 04 08 0C +========== ===== ========= ===== ====== ====== ========= + +Chips with additional timeout_en register +----------------------------------------- + +These Maxim chips have a bus timeout function which can be enabled in +the timeout_en register. This is present in only two chips. Defaults to +timeout disabled. + +========== ===== ========= ===== ====== ====== ========= ========== +compatible lines interrupt input output invert direction timeout_en +========== ===== ========= ===== ====== ====== ========= ========== +max7310 8 no 00 01 02 03 04 +max7312 16 yes 00 02 04 06 08 +========== ===== ========= ===== ====== ====== ========= ========== + +Chips with additional int_mask register +--------------------------------------- + +These chips have an interrupt mask register in addition to the 4 basic +registers. The interrupt masks default to all interrupts disabled. To +use interrupts with these chips, the driver has to set the int_mask +register. + +========== ===== ========= ===== ====== ====== ========= ======== +compatible lines interrupt input output invert direction int_mask +========== ===== ========= ===== ====== ====== ========= ======== +pca9505 40 yes 00 08 10 18 20 +pca9506 40 yes 00 08 10 18 20 +========== ===== ========= ===== ====== ====== ========= ======== + +Chips with additional int_mask and out_conf registers +----------------------------------------------------- + +This chip has an interrupt mask register, and an output port +configuration register, which can select between push-pull and +open-drain modes. Each bit controls two lines. Both of these registers +are present in PCAL chips as well, albeit the out_conf works +differently. + +========== ===== ========= ===== ====== ====== ========= ======== ======== +compatible lines interrupt input output invert direction int_mask out_conf +========== ===== ========= ===== ====== ====== ========= ======== ======== +pca9698 40 yes 00 08 10 18 20 28 +========== ===== ========= ===== ====== ====== ========= ======== ======== + +pca9698 also has a "master output" register for setting all outputs per +port to the same value simultaneously, and a chip specific mode register +for various additional chip settings. + +========== ============= ==== +compatible master_output mode +========== ============= ==== +pca9698 29 2A +========== ============= ==== + +Chips with LED blink and intensity control +------------------------------------------ + +These Maxim chips have no invert register. + +They have two sets of output registers (output0 and output1). An internal +timer alternates the effective output between the values set in these +registers, if blink mode is enabled in the blink register. The +master_intensity register and the intensity registers together define +the PWM intensity value for each pair of outputs. + +These chips can be used as simple GPIO expanders if the driver handles the +input, output0 and direction registers. + +========== ===== ========= ===== ======= ========= ======= ================ ===== ========= +compatible lines interrupt input output0 direction output1 master_intensity blink intensity +========== ===== ========= ===== ======= ========= ======= ================ ===== ========= +max7315 8 yes 00 01 03 09 0E 0F 10 +max7313 16 yes 00 02 06 0A 0E 0F 10 +========== ===== ========= ===== ======= ========= ======= ================ ===== ========= + +Basic PCAL chips +---------------- + +========== ===== ========= ===== ====== ====== ========= +compatible lines interrupt input output invert direction +========== ===== ========= ===== ====== ====== ========= +pcal6408 8 yes 00 01 02 03 +pcal9554b 8 yes 00 01 02 03 +pcal6416 16 yes 00 02 04 06 +pcal9535 16 yes 00 02 04 06 +pcal9555a 16 yes 00 02 04 06 +========== ===== ========= ===== ====== ====== ========= + +These chips have several additional features: + + 1. output drive strength setting (out_strength) + 2. input latch (in_latch) + 3. pull-up/pull-down (pull_in, pull_sel) + 4. push-pull/open-drain outputs (out_conf) + 5. interrupt mask and interrupt status (int_mask, int_status) + +========== ============ ======== ======= ======== ======== ========== ======== +compatible out_strength in_latch pull_en pull_sel int_mask int_status out_conf +========== ============ ======== ======= ======== ======== ========== ======== +pcal6408 40 42 43 44 45 46 4F +pcal9554b 40 42 43 44 45 46 4F +pcal6416 40 44 46 48 4A 4C 4F +pcal9535 40 44 46 48 4A 4C 4F +pcal9555a 40 44 46 48 4A 4C 4F +========== ============ ======== ======= ======== ======== ========== ======== + +Currently the driver has support for the input latch, pull-up/pull-down +and uses int_mask and int_status for interrupts. + +PCAL chips with extended interrupt and output configuration functions +--------------------------------------------------------------------- + +========== ===== ========= ===== ====== ====== ========= +compatible lines interrupt input output invert direction +========== ===== ========= ===== ====== ====== ========= +pcal6524 24 yes 00 04 08 0C +pcal6534 34 yes 00 05 0A 0F +========== ===== ========= ===== ====== ====== ========= + +These chips have the full PCAL register set, plus the following functions: + + 1. interrupt event selection: level, rising, falling, any edge + 2. clear interrupt status per line + 3. read input without clearing interrupt status + 4. individual output config (push-pull/open-drain) per output line + 5. debounce inputs + +========== ============ ======== ======= ======== ======== ========== ======== +compatible out_strength in_latch pull_en pull_sel int_mask int_status out_conf +========== ============ ======== ======= ======== ======== ========== ======== +pcal6524 40 48 4C 50 54 58 5C +pcal6534 30 3A 3F 44 49 4E 53 +========== ============ ======== ======= ======== ======== ========== ======== + +========== ======== ========= ============ ============== ======== ============== +compatible int_edge int_clear input_status indiv_out_conf debounce debounce_count +========== ======== ========= ============ ============== ======== ============== +pcal6524 60 68 6C 70 74 76 +pcal6534 54 5E 63 68 6D 6F +========== ======== ========= ============ ============== ======== ============== + +As can be seen in the table above, pcal6534 does not follow the usual +bank spacing rule. Its banks are closely packed instead. + +PCA957X chips with a completely different register layout +--------------------------------------------------------- + +These chips have the basic 4 registers, but at unusual addresses. + +Additionally, they have: + + 1. pull-up/pull-down (pull_sel) + 2. a global pull enable, defaults to disabled (config) + 3. interrupt mask, interrupt status (int_mask, int_status) + +========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ========== +compatible lines interrupt input invert config pull_sel direction output int_mask int_status +========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ========== +pca9574 8 yes 00 01 02 03 04 05 06 07 +pca9575 16 yes 00 02 04 06 08 0A 0C 0E +========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ========== + +Currently the driver supports none of the advanced features. + +XRA1202 +------- + +Basic 4 registers, plus advanced features: + + 1. interrupt mask, defaults to interrupts disabled + 2. interrupt status + 3. interrupt event selection, level, rising, falling, any edge + (int_mask, rising_mask, falling_mask) + 4. pull-up (no pull-down) + 5. tri-state + 6. debounce + +========== ===== ========= ===== ====== ====== ========= ========= +compatible lines interrupt input output invert direction pullup_en +========== ===== ========= ===== ====== ====== ========= ========= +xra1202 8 yes 00 01 02 03 04 +========== ===== ========= ===== ====== ====== ========= ========= + +========== ======== ======== ========== =========== ============ ======== +compatible int_mask tristate int_status rising_mask falling_mask debounce +========== ======== ======== ========== =========== ============ ======== +xra1202 05 06 07 08 09 0A +========== ======== ======== ========== =========== ============ ======== + +Overview of functions +===================== + +This section lists chip functions that are supported by the driver +already, or are at least common in multiple chips. + +Input, Output, Invert, Direction +-------------------------------- + +The basic 4 GPIO functions are present in all but one chip category, i.e. +`Chips with LED blink and intensity control`_ are missing the invert +register. + +3 different layouts are used for these registers: + + 1. banks 0, 1, 2, 3 with bank offsets of 2^n + - all other chips + + 2. banks 0, 1, 2, 3 with closely packed banks + - pcal6534 + + 3. banks 0, 5, 1, 4 with bank offsets of 2^n + - pca9574 + - pca9575 + +Interrupts +---------- + +Only an interrupt mask register +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The same layout is used for all of these: + + 1. bank 5 with bank offsets of 2^n + - pca9505 + - pca9506 + - pca9698 + +Interrupt mask and interrupt status registers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +These work the same way in all of the chips: mask and status have +one bit per line, 1 in the mask means interrupt enabled. + +Layouts: + + 1. base offset 0x40, bank 5 and bank 6, bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 5 and 6, closely packed banks + - pcal6534 + + 3. bank 6 and 7, bank offsets of 2^n + - pca9574 + - pca9575 + + 4. bank 5 and 7, bank offsets of 2^n + - xra1202 + +Interrupt on specific edges +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +`PCAL chips with extended interrupt and output configuration functions`_ +have an int_edge register. This contains 2 bits per line, one of 4 events +can be selected for each line: + + 0: level, 1: rising edge, 2: falling edge, 3: any edge + +Layouts: + + 1. base offset 0x40, bank 7, bank offsets of 2^n + + - pcal6524 + + 2. base offset 0x30, bank 7 + offset 0x01, closely packed banks + (out_conf is 1 byte, not (lines/8) bytes, hence the 0x01 offset) + + - pcal6534 + +`XRA1202`_ chips have a different mechanism for the same thing: they have +a rising mask and a falling mask, with one bit per line. + +Layout: + + 1. bank 5, bank offsets of 2^n + +Input latch +----------- + +Only `Basic PCAL chips`_ and +`PCAL chips with extended interrupt and output configuration functions`_ +have this function. When the latch is enabled, the interrupt is not cleared +until the input port is read. When the latch is disabled, the interrupt +is cleared even if the input register is not read, if the input pin returns +to the logic value it had before generating the interrupt. Defaults to latch +disabled. + +Currently the driver enables the latch for each line with interrupt +enabled. + + 1. base offset 0x40, bank 2, bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 2, closely packed banks + - pcal6534 + +Pull-up and pull-down +--------------------- + +`Basic PCAL chips`_ and +`PCAL chips with extended interrupt and output configuration functions`_ +use the same mechanism: their pull_en register enables the pull-up or pull-down +function, and their pull_sel register chooses the direction. They all use one +bit per line. + + 0: pull-down, 1: pull-up + +Layouts: + + 1. base offset 0x40, bank 3 (en) and 4 (sel), bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 3 (en) and 4 (sel), closely packed banks + - pcal6534 + +`PCA957X chips with a completely different register layout`_ have a pull_sel +register with one bit per line, and a global pull_en bit in their config +register. + +Layout: + + 1. bank 2 (config), bank 3 (sel), bank offsets of 2^n + - pca9574 + - pca9575 + +`XRA1202`_ chips can only pull-up. They have a pullup_en register. + +Layout: + + 1. bank 4, bank offsets of 2^n + - xra1202 + +Push-pull and open-drain +------------------------ + +`Chips with additional int_mask and out_conf registers`_ have this function, +but only for select IO ports. Register has 1 bit per 2 lines. In pca9698, +only port0 and port1 have this function. + + 0: open-drain, 1: push-pull + +Layout: + + 1. base offset 5*bankoffset + - pca9698 + +`Basic PCAL chips`_ have 1 bit per port in one single out_conf register. +Only whole ports can be configured. + + 0: push-pull, 1: open-drain + +Layout: + + 1. base offset 0x4F + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + +`PCAL chips with extended interrupt and output configuration functions`_ +can set this for each line individually. They have the same per-port out_conf +register as `Basic PCAL chips`_, but they also have an indiv_out_conf register +with one bit per line, which inverts the effect of the port-wise setting. + + 0: push-pull, 1: open-drain + +Layouts: + + 1. base offset 0x40 + 7*bankoffset (out_conf), + base offset 0x60, bank 4 (indiv_out_conf) with bank offset of 2^n + + - pcal6524 + + 2. base offset 0x30 + 7*banksize (out_conf), + base offset 0x54, bank 4 (indiv_out_conf), closely packed banks + + - pcal6534 + +This function is currently not supported by the driver. + +Output drive strength +--------------------- + +Only PCAL chips have this function. 2 bits per line. + +==== ============== +bits drive strength +==== ============== + 00 0.25x + 01 0.50x + 10 0.75x + 11 1.00x +==== ============== + + 1. base offset 0x40, bank 0 and 1, bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 0 and 1, closely packed banks + - pcal6534 + +Currently not supported by the driver. + +Datasheets +========== + +- MAX7310: https://datasheets.maximintegrated.com/en/ds/MAX7310.pdf +- MAX7312: https://datasheets.maximintegrated.com/en/ds/MAX7312.pdf +- MAX7313: https://datasheets.maximintegrated.com/en/ds/MAX7313.pdf +- MAX7315: https://datasheets.maximintegrated.com/en/ds/MAX7315.pdf +- MAX7318: https://datasheets.maximintegrated.com/en/ds/MAX7318.pdf +- PCA6107: https://pdf1.alldatasheet.com/datasheet-pdf/view/161780/TI/PCA6107.html +- PCA6408A: https://www.nxp.com/docs/en/data-sheet/PCA6408A.pdf +- PCA6416A: https://www.nxp.com/docs/en/data-sheet/PCA6416A.pdf +- PCA9505: https://www.nxp.com/docs/en/data-sheet/PCA9505_9506.pdf +- PCA9505: https://www.nxp.com/docs/en/data-sheet/PCA9505_9506.pdf +- PCA9534: https://www.nxp.com/docs/en/data-sheet/PCA9534.pdf +- PCA9535: https://www.nxp.com/docs/en/data-sheet/PCA9535_PCA9535C.pdf +- PCA9536: https://www.nxp.com/docs/en/data-sheet/PCA9536.pdf +- PCA9537: https://www.nxp.com/docs/en/data-sheet/PCA9537.pdf +- PCA9538: https://www.nxp.com/docs/en/data-sheet/PCA9538.pdf +- PCA9539: https://www.nxp.com/docs/en/data-sheet/PCA9539_PCA9539R.pdf +- PCA9554: https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf +- PCA9555: https://www.nxp.com/docs/en/data-sheet/PCA9555.pdf +- PCA9556: https://www.nxp.com/docs/en/data-sheet/PCA9556.pdf +- PCA9557: https://www.nxp.com/docs/en/data-sheet/PCA9557.pdf +- PCA9574: https://www.nxp.com/docs/en/data-sheet/PCA9574.pdf +- PCA9575: https://www.nxp.com/docs/en/data-sheet/PCA9575.pdf +- PCA9698: https://www.nxp.com/docs/en/data-sheet/PCA9698.pdf +- PCAL6408A: https://www.nxp.com/docs/en/data-sheet/PCAL6408A.pdf +- PCAL6416A: https://www.nxp.com/docs/en/data-sheet/PCAL6416A.pdf +- PCAL6524: https://www.nxp.com/docs/en/data-sheet/PCAL6524.pdf +- PCAL6534: https://www.nxp.com/docs/en/data-sheet/PCAL6534.pdf +- PCAL9535A: https://www.nxp.com/docs/en/data-sheet/PCAL9535A.pdf +- PCAL9554B: https://www.nxp.com/docs/en/data-sheet/PCAL9554B_PCAL9554C.pdf +- PCAL9555A: https://www.nxp.com/docs/en/data-sheet/PCAL9555A.pdf +- TCA6408A: https://www.ti.com/lit/gpn/tca6408a +- TCA6416: https://www.ti.com/lit/gpn/tca6416 +- TCA6424: https://www.ti.com/lit/gpn/tca6424 +- TCA9539: https://www.ti.com/lit/gpn/tca9539 +- TCA9554: https://www.ti.com/lit/gpn/tca9554 +- XRA1202: https://assets.maxlinear.com/web/documents/xra1202_1202p_101_042213.pdf diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 3e2a270bd828..baff96b5cf0b 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -93,6 +93,7 @@ Subsystem-specific APIs frame-buffer aperture generic-counter + generic_pt gpio/index hsi hte/index diff --git a/Documentation/driver-api/pci/p2pdma.rst b/Documentation/driver-api/pci/p2pdma.rst index d0b241628cf1..280673b50350 100644 --- a/Documentation/driver-api/pci/p2pdma.rst +++ b/Documentation/driver-api/pci/p2pdma.rst @@ -9,22 +9,48 @@ between two devices on the bus. This type of transaction is henceforth called Peer-to-Peer (or P2P). However, there are a number of issues that make P2P transactions tricky to do in a perfectly safe way. -One of the biggest issues is that PCI doesn't require forwarding -transactions between hierarchy domains, and in PCIe, each Root Port -defines a separate hierarchy domain. To make things worse, there is no -simple way to determine if a given Root Complex supports this or not. -(See PCIe r4.0, sec 1.3.1). Therefore, as of this writing, the kernel -only supports doing P2P when the endpoints involved are all behind the -same PCI bridge, as such devices are all in the same PCI hierarchy -domain, and the spec guarantees that all transactions within the -hierarchy will be routable, but it does not require routing -between hierarchies. - -The second issue is that to make use of existing interfaces in Linux, -memory that is used for P2P transactions needs to be backed by struct -pages. However, PCI BARs are not typically cache coherent so there are -a few corner case gotchas with these pages so developers need to -be careful about what they do with them. +For PCIe the routing of Transaction Layer Packets (TLPs) is well-defined up +until they reach a host bridge or root port. If the path includes PCIe switches +then based on the ACS settings the transaction can route entirely within +the PCIe hierarchy and never reach the root port. The kernel will evaluate +the PCIe topology and always permit P2P in these well-defined cases. + +However, if the P2P transaction reaches the host bridge then it might have to +hairpin back out the same root port, be routed inside the CPU SOC to another +PCIe root port, or routed internally to the SOC. + +The PCIe specification doesn't define the forwarding of transactions between +hierarchy domains and kernel defaults to blocking such routing. There is an +allow list to allow detecting known-good HW, in which case P2P between any +two PCIe devices will be permitted. + +Since P2P inherently is doing transactions between two devices it requires two +drivers to be co-operating inside the kernel. The providing driver has to convey +its MMIO to the consuming driver. To meet the driver model lifecycle rules the +MMIO must have all DMA mapping removed, all CPU accesses prevented, all page +table mappings undone before the providing driver completes remove(). + +This requires the providing and consuming driver to actively work together to +guarantee that the consuming driver has stopped using the MMIO during a removal +cycle. This is done by either a synchronous invalidation shutdown or waiting +for all usage refcounts to reach zero. + +At the lowest level the P2P subsystem offers a naked struct p2p_provider that +delegates lifecycle management to the providing driver. It is expected that +drivers using this option will wrap their MMIO memory in DMABUF and use DMABUF +to provide an invalidation shutdown. These MMIO addresess have no struct page, and +if used with mmap() must create special PTEs. As such there are very few +kernel uAPIs that can accept pointers to them; in particular they cannot be used +with read()/write(), including O_DIRECT. + +Building on this, the subsystem offers a layer to wrap the MMIO in a ZONE_DEVICE +pgmap of MEMORY_DEVICE_PCI_P2PDMA to create struct pages. The lifecycle of +pgmap ensures that when the pgmap is destroyed all other drivers have stopped +using the MMIO. This option works with O_DIRECT flows, in some cases, if the +underlying subsystem supports handling MEMORY_DEVICE_PCI_P2PDMA through +FOLL_PCI_P2PDMA. The use of FOLL_LONGTERM is prevented. As this relies on pgmap +it also relies on architecture support along with alignment and minimum size +limitations. Driver Writer's Guide @@ -114,14 +140,39 @@ allocating scatter-gather lists with P2P memory. Struct Page Caveats ------------------- -Driver writers should be very careful about not passing these special -struct pages to code that isn't prepared for it. At this time, the kernel -interfaces do not have any checks for ensuring this. This obviously -precludes passing these pages to userspace. +While the MEMORY_DEVICE_PCI_P2PDMA pages can be installed in VMAs, +pin_user_pages() and related will not return them unless FOLL_PCI_P2PDMA is set. -P2P memory is also technically IO memory but should never have any side -effects behind it. Thus, the order of loads and stores should not be important -and ioreadX(), iowriteX() and friends should not be necessary. +The MEMORY_DEVICE_PCI_P2PDMA pages require care to support in the kernel. The +KVA is still MMIO and must still be accessed through the normal +readX()/writeX()/etc helpers. Direct CPU access (e.g. memcpy) is forbidden, just +like any other MMIO mapping. While this will actually work on some +architectures, others will experience corruption or just crash in the kernel. +Supporting FOLL_PCI_P2PDMA in a subsystem requires scrubbing it to ensure no CPU +access happens. + + +Usage With DMABUF +================= + +DMABUF provides an alternative to the above struct page-based +client/provider/orchestrator system and should be used when struct page +doesn't exist. In this mode the exporting driver will wrap +some of its MMIO in a DMABUF and give the DMABUF FD to userspace. + +Userspace can then pass the FD to an importing driver which will ask the +exporting driver to map it to the importer. + +In this case the initiator and target pci_devices are known and the P2P subsystem +is used to determine the mapping type. The phys_addr_t-based DMA API is used to +establish the dma_addr_t. + +Lifecycle is controlled by DMABUF move_notify(). When the exporting driver wants +to remove() it must deliver an invalidation shutdown to all DMABUF importing +drivers through move_notify() and synchronously DMA unmap all the MMIO. + +No importing driver can continue to have a DMA map to the MMIO after the +exporting driver has destroyed its p2p_provider. P2P DMA Support Library diff --git a/Documentation/driver-api/pci/pci.rst b/Documentation/driver-api/pci/pci.rst index 59d86e827198..99a1bbaaec5d 100644 --- a/Documentation/driver-api/pci/pci.rst +++ b/Documentation/driver-api/pci/pci.rst @@ -37,6 +37,9 @@ PCI Support Library .. kernel-doc:: drivers/pci/slot.c :export: +.. kernel-doc:: drivers/pci/rebar.c + :export: + .. kernel-doc:: drivers/pci/rom.c :export: diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 5139705089f2..781129f78b06 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -92,6 +92,18 @@ GEM Atomic Helper Reference .. kernel-doc:: drivers/gpu/drm/drm_gem_atomic_helper.c :export: +VBLANK Helper Reference +----------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_vblank_helper.c + :doc: overview + +.. kernel-doc:: include/drm/drm_vblank_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_vblank_helper.c + :export: + Simple KMS Helper Reference =========================== diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index abfe220764e1..2292e65f044c 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -413,6 +413,21 @@ Plane Panic Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_panic.c :export: +Colorop Abstraction +=================== + +.. kernel-doc:: drivers/gpu/drm/drm_colorop.c + :doc: overview + +Colorop Functions Reference +--------------------------- + +.. kernel-doc:: include/drm/drm_colorop.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_colorop.c + :export: + Display Modes Function Reference ================================ diff --git a/Documentation/gpu/nova/core/todo.rst b/Documentation/gpu/nova/core/todo.rst index 0972cb905f7a..35cc7c31d423 100644 --- a/Documentation/gpu/nova/core/todo.rst +++ b/Documentation/gpu/nova/core/todo.rst @@ -44,25 +44,6 @@ automatically generates the corresponding mappings between a value and a number. | Complexity: Beginner | Link: https://docs.rs/num/latest/num/trait.FromPrimitive.html -Conversion from byte slices for types implementing FromBytes [TRSM] -------------------------------------------------------------------- - -We retrieve several structures from byte streams coming from the BIOS or loaded -firmware. At the moment converting the bytes slice into the proper type require -an inelegant `unsafe` operation; this will go away once `FromBytes` implements -a proper `from_bytes` method. - -| Complexity: Beginner - -CoherentAllocation improvements [COHA] --------------------------------------- - -`CoherentAllocation` needs a safe way to write into the allocation, and to -obtain slices within the allocation. - -| Complexity: Beginner -| Contact: Abdiel Janulgue - Generic register abstraction [REGA] ----------------------------------- @@ -153,17 +134,6 @@ A `num` core kernel module is being designed to provide these operations. | Complexity: Intermediate | Contact: Alexandre Courbot -Delay / Sleep abstractions [DLAY] ---------------------------------- - -Rust abstractions for the kernel's delay() and sleep() functions. - -FUJITA Tomonori plans to work on abstractions for read_poll_timeout_atomic() -(and friends) [1]. - -| Complexity: Beginner -| Link: https://lore.kernel.org/netdev/20250228.080550.354359820929821928.fujita.tomonori@gmail.com/ [1] - IRQ abstractions ---------------- diff --git a/Documentation/gpu/rfc/color_pipeline.rst b/Documentation/gpu/rfc/color_pipeline.rst new file mode 100644 index 000000000000..cd1cc2d0f988 --- /dev/null +++ b/Documentation/gpu/rfc/color_pipeline.rst @@ -0,0 +1,378 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +Linux Color Pipeline API +======================== + +What problem are we solving? +============================ + +We would like to support pre-, and post-blending complex color +transformations in display controller hardware in order to allow for +HW-supported HDR use-cases, as well as to provide support to +color-managed applications, such as video or image editors. + +It is possible to support an HDR output on HW supporting the Colorspace +and HDR Metadata drm_connector properties, but that requires the +compositor or application to render and compose the content into one +final buffer intended for display. Doing so is costly. + +Most modern display HW offers various 1D LUTs, 3D LUTs, matrices, and other +operations to support color transformations. These operations are often +implemented in fixed-function HW and therefore much more power efficient than +performing similar operations via shaders or CPU. + +We would like to make use of this HW functionality to support complex color +transformations with no, or minimal CPU or shader load. The switch between HW +fixed-function blocks and shaders/CPU must be seamless with no visible +difference when fallback to shaders/CPU is neceesary at any time. + + +How are other OSes solving this problem? +======================================== + +The most widely supported use-cases regard HDR content, whether video or +gaming. + +Most OSes will specify the source content format (color gamut, encoding transfer +function, and other metadata, such as max and average light levels) to a driver. +Drivers will then program their fixed-function HW accordingly to map from a +source content buffer's space to a display's space. + +When fixed-function HW is not available the compositor will assemble a shader to +ask the GPU to perform the transformation from the source content format to the +display's format. + +A compositor's mapping function and a driver's mapping function are usually +entirely separate concepts. On OSes where a HW vendor has no insight into +closed-source compositor code such a vendor will tune their color management +code to visually match the compositor's. On other OSes, where both mapping +functions are open to an implementer they will ensure both mappings match. + +This results in mapping algorithm lock-in, meaning that no-one alone can +experiment with or introduce new mapping algorithms and achieve +consistent results regardless of which implementation path is taken. + +Why is Linux different? +======================= + +Unlike other OSes, where there is one compositor for one or more drivers, on +Linux we have a many-to-many relationship. Many compositors; many drivers. +In addition each compositor vendor or community has their own view of how +color management should be done. This is what makes Linux so beautiful. + +This means that a HW vendor can now no longer tune their driver to one +compositor, as tuning it to one could make it look fairly different from +another compositor's color mapping. + +We need a better solution. + + +Descriptive API +=============== + +An API that describes the source and destination colorspaces is a descriptive +API. It describes the input and output color spaces but does not describe +how precisely they should be mapped. Such a mapping includes many minute +design decision that can greatly affect the look of the final result. + +It is not feasible to describe such mapping with enough detail to ensure the +same result from each implementation. In fact, these mappings are a very active +research area. + + +Prescriptive API +================ + +A prescriptive API describes not the source and destination colorspaces. It +instead prescribes a recipe for how to manipulate pixel values to arrive at the +desired outcome. + +This recipe is generally an ordered list of straight-forward operations, +with clear mathematical definitions, such as 1D LUTs, 3D LUTs, matrices, +or other operations that can be described in a precise manner. + + +The Color Pipeline API +====================== + +HW color management pipelines can significantly differ between HW +vendors in terms of availability, ordering, and capabilities of HW +blocks. This makes a common definition of color management blocks and +their ordering nigh impossible. Instead we are defining an API that +allows user space to discover the HW capabilities in a generic manner, +agnostic of specific drivers and hardware. + + +drm_colorop Object +================== + +To support the definition of color pipelines we define the DRM core +object type drm_colorop. Individual drm_colorop objects will be chained +via the NEXT property of a drm_colorop to constitute a color pipeline. +Each drm_colorop object is unique, i.e., even if multiple color +pipelines have the same operation they won't share the same drm_colorop +object to describe that operation. + +Note that drivers are not expected to map drm_colorop objects statically +to specific HW blocks. The mapping of drm_colorop objects is entirely a +driver-internal detail and can be as dynamic or static as a driver needs +it to be. See more in the Driver Implementation Guide section below. + +Each drm_colorop has three core properties: + +TYPE: An enumeration property, defining the type of transformation, such as +* enumerated curve +* custom (uniform) 1D LUT +* 3x3 matrix +* 3x4 matrix +* 3D LUT +* etc. + +Depending on the type of transformation other properties will describe +more details. + +BYPASS: A boolean property that can be used to easily put a block into +bypass mode. The BYPASS property is not mandatory for a colorop, as long +as the entire pipeline can get bypassed by setting the COLOR_PIPELINE on +a plane to '0'. + +NEXT: The ID of the next drm_colorop in a color pipeline, or 0 if this +drm_colorop is the last in the chain. + +An example of a drm_colorop object might look like one of these:: + + /* 1D enumerated curve */ + Color operation 42 + ├─ "TYPE": immutable enum {1D enumerated curve, 1D LUT, 3x3 matrix, 3x4 matrix, 3D LUT, etc.} = 1D enumerated curve + ├─ "BYPASS": bool {true, false} + ├─ "CURVE_1D_TYPE": enum {sRGB EOTF, sRGB inverse EOTF, PQ EOTF, PQ inverse EOTF, …} + └─ "NEXT": immutable color operation ID = 43 + + /* custom 4k entry 1D LUT */ + Color operation 52 + ├─ "TYPE": immutable enum {1D enumerated curve, 1D LUT, 3x3 matrix, 3x4 matrix, 3D LUT, etc.} = 1D LUT + ├─ "BYPASS": bool {true, false} + ├─ "SIZE": immutable range = 4096 + ├─ "DATA": blob + └─ "NEXT": immutable color operation ID = 0 + + /* 17^3 3D LUT */ + Color operation 72 + ├─ "TYPE": immutable enum {1D enumerated curve, 1D LUT, 3x3 matrix, 3x4 matrix, 3D LUT, etc.} = 3D LUT + ├─ "BYPASS": bool {true, false} + ├─ "SIZE": immutable range = 17 + ├─ "DATA": blob + └─ "NEXT": immutable color operation ID = 73 + +drm_colorop extensibility +------------------------- + +Unlike existing DRM core objects, like &drm_plane, drm_colorop is not +extensible. This simplifies implementations and keeps all functionality +for managing &drm_colorop objects in the DRM core. + +If there is a need one may introduce a simple &drm_colorop_funcs +function table in the future, for example to support an IN_FORMATS +property on a &drm_colorop. + +If a driver requires the ability to create a driver-specific colorop +object they will need to add &drm_colorop func table support with +support for the usual functions, like destroy, atomic_duplicate_state, +and atomic_destroy_state. + + +COLOR_PIPELINE Plane Property +============================= + +Color Pipelines are created by a driver and advertised via a new +COLOR_PIPELINE enum property on each plane. Values of the property +always include object id 0, which is the default and means all color +processing is disabled. Additional values will be the object IDs of the +first drm_colorop in a pipeline. A driver can create and advertise none, +one, or more possible color pipelines. A DRM client will select a color +pipeline by setting the COLOR PIPELINE to the respective value. + +NOTE: Many DRM clients will set enumeration properties via the string +value, often hard-coding it. Since this enumeration is generated based +on the colorop object IDs it is important to perform the Color Pipeline +Discovery, described below, instead of hard-coding color pipeline +assignment. Drivers might generate the enum strings dynamically. +Hard-coded strings might only work for specific drivers on a specific +pieces of HW. Color Pipeline Discovery can work universally, as long as +drivers implement the required color operations. + +The COLOR_PIPELINE property is only exposed when the +DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE is set. Drivers shall ignore any +existing pre-blend color operations when this cap is set, such as +COLOR_RANGE and COLOR_ENCODING. If drivers want to support COLOR_RANGE +or COLOR_ENCODING functionality when the color pipeline client cap is +set, they are expected to expose colorops in the pipeline to allow for +the appropriate color transformation. + +Setting of the COLOR_PIPELINE plane property or drm_colorop properties +is only allowed for userspace that sets this client cap. + +An example of a COLOR_PIPELINE property on a plane might look like this:: + + Plane 10 + ├─ "TYPE": immutable enum {Overlay, Primary, Cursor} = Primary + ├─ … + └─ "COLOR_PIPELINE": enum {0, 42, 52} = 0 + + +Color Pipeline Discovery +======================== + +A DRM client wanting color management on a drm_plane will: + +1. Get the COLOR_PIPELINE property of the plane +2. iterate all COLOR_PIPELINE enum values +3. for each enum value walk the color pipeline (via the NEXT pointers) + and see if the available color operations are suitable for the + desired color management operations + +If userspace encounters an unknown or unsuitable color operation during +discovery it does not need to reject the entire color pipeline outright, +as long as the unknown or unsuitable colorop has a "BYPASS" property. +Drivers will ensure that a bypassed block does not have any effect. + +An example of chained properties to define an AMD pre-blending color +pipeline might look like this:: + + Plane 10 + ├─ "TYPE" (immutable) = Primary + └─ "COLOR_PIPELINE": enum {0, 44} = 0 + + Color operation 44 + ├─ "TYPE" (immutable) = 1D enumerated curve + ├─ "BYPASS": bool + ├─ "CURVE_1D_TYPE": enum {sRGB EOTF, PQ EOTF} = sRGB EOTF + └─ "NEXT" (immutable) = 45 + + Color operation 45 + ├─ "TYPE" (immutable) = 3x4 Matrix + ├─ "BYPASS": bool + ├─ "DATA": blob + └─ "NEXT" (immutable) = 46 + + Color operation 46 + ├─ "TYPE" (immutable) = 1D enumerated curve + ├─ "BYPASS": bool + ├─ "CURVE_1D_TYPE": enum {sRGB Inverse EOTF, PQ Inverse EOTF} = sRGB EOTF + └─ "NEXT" (immutable) = 47 + + Color operation 47 + ├─ "TYPE" (immutable) = 1D LUT + ├─ "SIZE": immutable range = 4096 + ├─ "DATA": blob + └─ "NEXT" (immutable) = 48 + + Color operation 48 + ├─ "TYPE" (immutable) = 3D LUT + ├─ "DATA": blob + └─ "NEXT" (immutable) = 49 + + Color operation 49 + ├─ "TYPE" (immutable) = 1D enumerated curve + ├─ "BYPASS": bool + ├─ "CURVE_1D_TYPE": enum {sRGB EOTF, PQ EOTF} = sRGB EOTF + └─ "NEXT" (immutable) = 0 + + +Color Pipeline Programming +========================== + +Once a DRM client has found a suitable pipeline it will: + +1. Set the COLOR_PIPELINE enum value to the one pointing at the first + drm_colorop object of the desired pipeline +2. Set the properties for all drm_colorop objects in the pipeline to the + desired values, setting BYPASS to true for unused drm_colorop blocks, + and false for enabled drm_colorop blocks +3. Perform (TEST_ONLY or not) atomic commit with all the other KMS + states it wishes to change + +To configure the pipeline for an HDR10 PQ plane and blending in linear +space, a compositor might perform an atomic commit with the following +property values:: + + Plane 10 + └─ "COLOR_PIPELINE" = 42 + + Color operation 42 + └─ "BYPASS" = true + + Color operation 44 + └─ "BYPASS" = true + + Color operation 45 + └─ "BYPASS" = true + + Color operation 46 + └─ "BYPASS" = true + + Color operation 47 + ├─ "DATA" = Gamut mapping + tone mapping + night mode + └─ "BYPASS" = false + + Color operation 48 + ├─ "CURVE_1D_TYPE" = PQ EOTF + └─ "BYPASS" = false + + +Driver Implementer's Guide +========================== + +What does this all mean for driver implementations? As noted above the +colorops can map to HW directly but don't need to do so. Here are some +suggestions on how to think about creating your color pipelines: + +- Try to expose pipelines that use already defined colorops, even if + your hardware pipeline is split differently. This allows existing + userspace to immediately take advantage of the hardware. + +- Additionally, try to expose your actual hardware blocks as colorops. + Define new colorop types where you believe it can offer significant + benefits if userspace learns to program them. + +- Avoid defining new colorops for compound operations with very narrow + scope. If you have a hardware block for a special operation that + cannot be split further, you can expose that as a new colorop type. + However, try to not define colorops for "use cases", especially if + they require you to combine multiple hardware blocks. + +- Design new colorops as prescriptive, not descriptive; by the + mathematical formula, not by the assumed input and output. + +A defined colorop type must be deterministic. The exact behavior of the +colorop must be documented entirely, whether via a mathematical formula +or some other description. Its operation can depend only on its +properties and input and nothing else, allowed error tolerance +notwithstanding. + + +Driver Forward/Backward Compatibility +===================================== + +As this is uAPI drivers can't regress color pipelines that have been +introduced for a given HW generation. New HW generations are free to +abandon color pipelines advertised for previous generations. +Nevertheless, it can be beneficial to carry support for existing color +pipelines forward as those will likely already have support in DRM +clients. + +Introducing new colorops to a pipeline is fine, as long as they can be +bypassed or are purely informational. DRM clients implementing support +for the pipeline can always skip unknown properties as long as they can +be confident that doing so will not cause unexpected results. + +If a new colorop doesn't fall into one of the above categories +(bypassable or informational) the modified pipeline would be unusable +for user space. In this case a new pipeline should be defined. + + +References +========== + +1. https://lore.kernel.org/dri-devel/QMers3awXvNCQlyhWdTtsPwkp5ie9bze_hD5nAccFW7a_RXlWjYB7MoUW_8CKLT2bSQwIXVi5H6VULYIxCdgvryZoAoJnC5lZgyK1QWn488=@emersion.fr/
\ No newline at end of file diff --git a/Documentation/gpu/rfc/index.rst b/Documentation/gpu/rfc/index.rst index 396e535377fb..ef19b0ba2a3e 100644 --- a/Documentation/gpu/rfc/index.rst +++ b/Documentation/gpu/rfc/index.rst @@ -35,3 +35,6 @@ host such documentation: .. toctree:: i915_vm_bind.rst + +.. toctree:: + color_pipeline.rst
\ No newline at end of file diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index b5f58b4274b1..9013ced318cb 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -623,6 +623,43 @@ Contact: Thomas Zimmermann <tzimmermann@suse.de>, Simona Vetter Level: Advanced +Implement a new DUMB_CREATE2 ioctl +---------------------------------- + +The current DUMB_CREATE ioctl is not well defined. Instead of a pixel and +framebuffer format, it only accepts a color mode of vague semantics. Assuming +a linear framebuffer, the color mode gives an idea of the supported pixel +format. But userspace effectively has to guess the correct values. It really +only works reliably with framebuffers in XRGB8888. Userspace has begun to +workaround these limitations by computing arbitrary format's buffer sizes and +calculating their sizes in terms of XRGB8888 pixels. + +One possible solution is a new ioctl DUMB_CREATE2. It should accept a DRM +format and a format modifier to resolve the color mode's ambiguity. As +framebuffers can be multi-planar, the new ioctl has to return the buffer size, +pitch and GEM handle for each individual color plane. + +In the first step, the new ioctl can be limited to the current features of +the existing DUMB_CREATE. Individual drivers can then be extended to support +multi-planar formats. Rockchip might require this and would be a good candidate. + +It might also be helpful to userspace to query information about the size of +a potential buffer, if allocated. Userspace would supply geometry and format; +the kernel would return minimal allocation sizes and scanline pitch. There is +interest to allocate that memory from another device and provide it to the +DRM driver (say via dma-buf). + +Another requested feature is the ability to allocate a buffer by size, without +format. Accelators use this for their buffer allocation and it could likely be +generalized. + +In addition to the kernel implementation, there must be user-space support +for the new ioctl. There's code in Mesa that might be able to use the new +call. + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Advanced Better Testing ============== diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst index 8a8b1002931f..1e79e62a6bc4 100644 --- a/Documentation/gpu/vkms.rst +++ b/Documentation/gpu/vkms.rst @@ -51,6 +51,97 @@ To disable the driver, use :: sudo modprobe -r vkms +Configuring With Configfs +========================= + +It is possible to create and configure multiple VKMS instances via configfs. + +Start by mounting configfs and loading VKMS:: + + sudo mount -t configfs none /config + sudo modprobe vkms + +Once VKMS is loaded, ``/config/vkms`` is created automatically. Each directory +under ``/config/vkms`` represents a VKMS instance, create a new one:: + + sudo mkdir /config/vkms/my-vkms + +By default, the instance is disabled:: + + cat /config/vkms/my-vkms/enabled + 0 + +And directories are created for each configurable item of the display pipeline:: + + tree /config/vkms/my-vkms + ├── connectors + ├── crtcs + ├── enabled + ├── encoders + └── planes + +To add items to the display pipeline, create one or more directories under the +available paths. + +Start by creating one or more planes:: + + sudo mkdir /config/vkms/my-vkms/planes/plane0 + +Planes have 1 configurable attribute: + +- type: Plane type: 0 overlay, 1 primary, 2 cursor (same values as those + exposed by the "type" property of a plane) + +Continue by creating one or more CRTCs:: + + sudo mkdir /config/vkms/my-vkms/crtcs/crtc0 + +CRTCs have 1 configurable attribute: + +- writeback: Enable or disable writeback connector support by writing 1 or 0 + +Next, create one or more encoders:: + + sudo mkdir /config/vkms/my-vkms/encoders/encoder0 + +Last but not least, create one or more connectors:: + + sudo mkdir /config/vkms/my-vkms/connectors/connector0 + +Connectors have 1 configurable attribute: + +- status: Connection status: 1 connected, 2 disconnected, 3 unknown (same values + as those exposed by the "status" property of a connector) + +To finish the configuration, link the different pipeline items:: + + sudo ln -s /config/vkms/my-vkms/crtcs/crtc0 /config/vkms/my-vkms/planes/plane0/possible_crtcs + sudo ln -s /config/vkms/my-vkms/crtcs/crtc0 /config/vkms/my-vkms/encoders/encoder0/possible_crtcs + sudo ln -s /config/vkms/my-vkms/encoders/encoder0 /config/vkms/my-vkms/connectors/connector0/possible_encoders + +Since at least one primary plane is required, make sure to set the right type:: + + echo "1" | sudo tee /config/vkms/my-vkms/planes/plane0/type + +Once you are done configuring the VKMS instance, enable it:: + + echo "1" | sudo tee /config/vkms/my-vkms/enabled + +Finally, you can remove the VKMS instance disabling it:: + + echo "0" | sudo tee /config/vkms/my-vkms/enabled + +And removing the top level directory and its subdirectories:: + + sudo rm /config/vkms/my-vkms/planes/*/possible_crtcs/* + sudo rm /config/vkms/my-vkms/encoders/*/possible_crtcs/* + sudo rm /config/vkms/my-vkms/connectors/*/possible_encoders/* + sudo rmdir /config/vkms/my-vkms/planes/* + sudo rmdir /config/vkms/my-vkms/crtcs/* + sudo rmdir /config/vkms/my-vkms/encoders/* + sudo rmdir /config/vkms/my-vkms/connectors/* + sudo rmdir /config/vkms/my-vkms + Testing With IGT ================ @@ -68,26 +159,23 @@ To return to graphical mode, do:: sudo systemctl isolate graphical.target -Once you are in text only mode, you can run tests using the --device switch -or IGT_DEVICE variable to specify the device filter for the driver we want -to test. IGT_DEVICE can also be used with the run-test.sh script to run the +Once you are in text only mode, you can run tests using the IGT_FORCE_DRIVER +variable to specify the device filter for the driver we want to test. +IGT_FORCE_DRIVER can also be used with the run-tests.sh script to run the tests for a specific driver:: - sudo ./build/tests/<name of test> --device "sys:/sys/devices/platform/vkms" - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/<name of test> - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t <name of test> + sudo IGT_FORCE_DRIVER="vkms" ./build/tests/<name of test> + sudo IGT_FORCE_DRIVER="vkms" ./scripts/run-tests.sh -t <name of test> For example, to test the functionality of the writeback library, we can run the kms_writeback test:: - sudo ./build/tests/kms_writeback --device "sys:/sys/devices/platform/vkms" - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_writeback - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t kms_writeback + sudo IGT_FORCE_DRIVER="vkms" ./build/tests/kms_writeback + sudo IGT_FORCE_DRIVER="vkms" ./scripts/run-tests.sh -t kms_writeback You can also run subtests if you do not want to run the entire test:: - sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms" - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip + sudo IGT_FORCE_DRIVER="vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip Testing With KUnit ================== @@ -147,21 +235,14 @@ Runtime Configuration --------------------- We want to be able to reconfigure vkms instance without having to reload the -module. Use/Test-cases: +module through configfs. Use/Test-cases: - Hotplug/hotremove connectors on the fly (to be able to test DP MST handling of compositors). -- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of - them first). - - Change output configuration: Plug/unplug screens, change EDID, allow changing the refresh rate. -The currently proposed solution is to expose vkms configuration through -configfs. All existing module options should be supported through configfs -too. - Writeback support ----------------- diff --git a/Documentation/gpu/xe/index.rst b/Documentation/gpu/xe/index.rst index 88b22fad880e..bc432c95d1a3 100644 --- a/Documentation/gpu/xe/index.rst +++ b/Documentation/gpu/xe/index.rst @@ -14,6 +14,7 @@ DG2, etc is provided to prototype the driver. xe_mm xe_map xe_migrate + xe_exec_queue xe_cs xe_pm xe_gt_freq diff --git a/Documentation/gpu/xe/xe_exec_queue.rst b/Documentation/gpu/xe/xe_exec_queue.rst new file mode 100644 index 000000000000..6076569e311c --- /dev/null +++ b/Documentation/gpu/xe/xe_exec_queue.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +=============== +Execution Queue +=============== + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue.c + :doc: Execution Queue + +Internal API +============ + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue_types.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue.c + :internal: diff --git a/Documentation/gpu/xe/xe_gt_freq.rst b/Documentation/gpu/xe/xe_gt_freq.rst index c0811200e327..182d6aabeee1 100644 --- a/Documentation/gpu/xe/xe_gt_freq.rst +++ b/Documentation/gpu/xe/xe_gt_freq.rst @@ -7,6 +7,9 @@ Xe GT Frequency Management .. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c :doc: Xe GT Frequency Management +.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_throttle.c + :doc: Xe GT Throttle + Internal API ============ diff --git a/Documentation/hid/hid-alps.rst b/Documentation/hid/hid-alps.rst index 94382bb0ada4..4a22a357f00c 100644 --- a/Documentation/hid/hid-alps.rst +++ b/Documentation/hid/hid-alps.rst @@ -69,6 +69,7 @@ To read/write to RAM, need to send a command to the device. The command format is as below. DataByte(SET_REPORT) +~~~~~~~~~~~~~~~~~~~~ ===== ====================== Byte1 Command Byte @@ -89,6 +90,7 @@ Value Byte is writing data when you send the write commands. When you read RAM, there is no meaning. DataByte(GET_REPORT) +~~~~~~~~~~~~~~~~~~~~ ===== ====================== Byte1 Response Byte @@ -104,8 +106,10 @@ Read value is stored in Value Byte. Packet Format +------------- + Touchpad data byte ------------------- +~~~~~~~~~~~~~~~~~~ ======= ======= ======= ======= ======= ======= ======= ======= ===== @@ -156,7 +160,7 @@ Zsn_6-0(7bit): StickPointer data byte ----------------------- +~~~~~~~~~~~~~~~~~~~~~~ ======= ======= ======= ======= ======= ======= ======= ======= ===== - b7 b6 b5 b4 b3 b2 b1 b0 diff --git a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst index 213644b4ecba..7903b6434326 100644 --- a/Documentation/hwmon/aht10.rst +++ b/Documentation/hwmon/aht10.rst @@ -20,6 +20,14 @@ Supported chips: English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf + * Aosong DHT20 + + Prefix: 'dht20' + + Addresses scanned: None + + Datasheet: https://www.digikey.co.nz/en/htmldatasheets/production/9184855/0/0/1/101020932 + Author: Johannes Cornelis Draaijer <jcdra1@gmail.com> @@ -33,7 +41,7 @@ The address of this i2c device may only be 0x38 Special Features ---------------- -AHT20 has additional CRC8 support which is sent as the last byte of the sensor +AHT20, DHT20 has additional CRC8 support which is sent as the last byte of the sensor values. Usage Notes diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst index a5a58c00c322..232885f24430 100644 --- a/Documentation/hwmon/asus_ec_sensors.rst +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -9,6 +9,7 @@ Supported boards: * PRIME X570-PRO * PRIME X670E-PRO WIFI * PRIME Z270-A + * Pro WS TRX50-SAGE WIFI * Pro WS X570-ACE * Pro WS WRX90E-SAGE SE * ProArt X570-CREATOR WIFI @@ -29,14 +30,17 @@ Supported boards: * ROG STRIX B550-I GAMING * ROG STRIX B650E-I GAMING WIFI * ROG STRIX B850-I GAMING WIFI + * ROG STRIX X470-I GAMING * ROG STRIX X570-E GAMING * ROG STRIX X570-E GAMING WIFI II * ROG STRIX X570-F GAMING * ROG STRIX X570-I GAMING * ROG STRIX X670E-E GAMING WIFI * ROG STRIX X670E-I GAMING WIFI + * ROG STRIX X870-F GAMING WIFI * ROG STRIX X870-I GAMING WIFI * ROG STRIX X870E-E GAMING WIFI + * ROG STRIX X870E-H GAMING WIFI7 * ROG STRIX Z390-F GAMING * ROG STRIX Z490-F GAMING * ROG STRIX Z690-A GAMING WIFI D4 diff --git a/Documentation/hwmon/ds1621.rst b/Documentation/hwmon/ds1621.rst index 552b37e9dd34..d0808720aa07 100644 --- a/Documentation/hwmon/ds1621.rst +++ b/Documentation/hwmon/ds1621.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1621.pdf * Dallas Semiconductor DS1625 @@ -17,7 +17,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.datasheetarchive.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1620.pdf * Maxim Integrated DS1631 @@ -25,7 +25,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1631-DS1731.pdf * Maxim Integrated DS1721 @@ -33,7 +33,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1721.pdf * Maxim Integrated DS1731 @@ -41,7 +41,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1631-DS1731.pdf Authors: - Christian W. Zuckschwerdt <zany@triq.net> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 51a5bdf75b08..85d7a686883e 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -144,6 +144,7 @@ Hardware Monitoring Kernel Drivers ltc4261 ltc4282 ltc4286 + macsmc-hwmon max127 max15301 max16064 @@ -151,6 +152,7 @@ Hardware Monitoring Kernel Drivers max1619 max16601 max1668 + max17616 max197 max20730 max20751 @@ -177,6 +179,7 @@ Hardware Monitoring Kernel Drivers mp2869 mp2888 mp2891 + mp2925 mp29502 mp2975 mp2993 @@ -184,6 +187,7 @@ Hardware Monitoring Kernel Drivers mp5920 mp5990 mp9941 + mp9945 mpq8785 nct6683 nct6775 @@ -253,6 +257,7 @@ Hardware Monitoring Kernel Drivers tps40422 tps53679 tps546d24 + tsc1641 twl4030-madc-hwmon ucd9000 ucd9200 diff --git a/Documentation/hwmon/isl68137.rst b/Documentation/hwmon/isl68137.rst index 5bc029c98383..e77f582c2850 100644 --- a/Documentation/hwmon/isl68137.rst +++ b/Documentation/hwmon/isl68137.rst @@ -414,6 +414,16 @@ Supported chips: Publicly available (after August 2020 launch) at the Renesas website + * Renesas RAA229141 + + Prefix: 'raa229141' + + Addresses scanned: - + + Datasheet: + + Provided by Renesas upon request and NDA + Authors: - Maxim Sloyko <maxims@google.com> - Robert Lippert <rlippert@google.com> diff --git a/Documentation/hwmon/jc42.rst b/Documentation/hwmon/jc42.rst index 19d10512f6c0..3736e63db2a8 100644 --- a/Documentation/hwmon/jc42.rst +++ b/Documentation/hwmon/jc42.rst @@ -33,7 +33,7 @@ Supported chips: Datasheets: - http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6604.pdf * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843 diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst index 908b3a9df06e..4269da04508e 100644 --- a/Documentation/hwmon/lm75.rst +++ b/Documentation/hwmon/lm75.rst @@ -23,15 +23,17 @@ Supported chips: http://www.national.com/ - * Dallas Semiconductor (now Maxim) DS75, DS1775, DS7505 + * Dallas Semiconductor (now Analog Devices) DS75, DS1775, DS7505 Prefixes: 'ds75', 'ds1775', 'ds7505' Addresses scanned: none - Datasheet: Publicly available at the Maxim website + Datasheets: - https://www.maximintegrated.com/ + https://www.analog.com/media/en/technical-documentation/data-sheets/DS75.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS1775.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS7505.pdf * Maxim MAX6625, MAX6626, MAX31725, MAX31726 @@ -39,9 +41,10 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available at the Maxim website + Datasheets: - http://www.maxim-ic.com/ + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6625-MAX6626.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31725-MAX31726.pdf * Microchip (TelCom) TCN75 diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst index 98452eed16d5..79c023521d39 100644 --- a/Documentation/hwmon/lm90.rst +++ b/Documentation/hwmon/lm90.rst @@ -9,7 +9,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website + + https://www.ti.com/lit/ds/symlink/lm84.pdf * National Semiconductor LM90 @@ -17,9 +19,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/pf/LM/LM90.html + https://www.ti.com/lit/ds/symlink/lm90.pdf * National Semiconductor LM89 @@ -27,9 +29,9 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/mpf/LM/LM89.html + https://www.ti.com/lit/ds/symlink/lm89.pdf * National Semiconductor LM99 @@ -37,9 +39,9 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/pf/LM/LM99.html + https://www.ti.com/lit/ds/symlink/lm99.pdf * National Semiconductor LM86 @@ -47,9 +49,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/mpf/LM/LM86.html + https://www.ti.com/lit/ds/symlink/lm86.pdf * Analog Devices ADM1020 @@ -57,7 +59,9 @@ Supported chips: Addresses scanned: I2C 0x4c - 0x4e - Datasheet: Publicly available at the Analog Devices website + Datasheet: Publicly available at the DigiKey website + + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1020.pdf * Analog Devices ADM1021 @@ -65,7 +69,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Analog Devices website + Datasheet: Publicly available at the DigiKey website + + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1021.pdf * Analog Devices ADM1021A/ADM1023 @@ -75,15 +81,18 @@ Supported chips: Datasheet: Publicly available at the Analog Devices website + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1021A.pdf + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1023.pdf + * Analog Devices ADM1032 Prefix: 'adm1032' Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the ON Semiconductor website + Datasheet: Publicly available at the DigiKey website - https://www.onsemi.com/PowerSolutions/product.do?id=ADM1032 + https://www.digikey.com/htmldatasheets/production/53140/0/0/1/ADM1032.pdf * Analog Devices ADT7461 @@ -111,9 +120,9 @@ Supported chips: Addresses scanned: I2C 0x4b and 0x4c - Datasheet: Publicly available at the ON Semiconductor website + Datasheet: Publicly available at the DigiKey website - https://www.onsemi.com/PowerSolutions/product.do?id=ADT7481 + https://www.digikey.com/htmldatasheets/production/234607/0/0/1/ADT7481.pdf * Analog Devices ADT7482 @@ -191,7 +200,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website + + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1617.pdf * Maxim MAX1617A @@ -199,7 +210,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website + + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1617A.pdf * Maxim MAX6642 @@ -207,9 +220,9 @@ Supported chips: Addresses scanned: I2C 0x48-0x4f - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6642.pdf * Maxim MAX6646 @@ -217,9 +230,9 @@ Supported chips: Addresses scanned: I2C 0x4d - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6646-MAX6649.pdf * Maxim MAX6647 @@ -227,9 +240,9 @@ Supported chips: Addresses scanned: I2C 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6646-MAX6649.pdf * Maxim MAX6648 @@ -237,9 +250,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6648-MAX6692.pdf * Maxim MAX6649 @@ -247,9 +260,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1617.pdf * Maxim MAX6654 @@ -259,9 +272,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - https://www.maximintegrated.com/en/products/sensors/MAX6654.html + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6654.pdf * Maxim MAX6657 @@ -269,9 +282,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6657-MAX6659.pdf * Maxim MAX6658 @@ -279,9 +292,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6657-MAX6659.pdf * Maxim MAX6659 @@ -289,9 +302,9 @@ Supported chips: Addresses scanned: I2C 0x4c, 0x4d, 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6657-MAX6659.pdf * Maxim MAX6680 @@ -301,9 +314,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6680-MAX6681.pdf * Maxim MAX6681 @@ -313,9 +326,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6680-MAX6681.pdf * Maxim MAX6692 @@ -323,9 +336,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6648-MAX6692.pdf * Maxim MAX6695 @@ -333,9 +346,9 @@ Supported chips: Addresses scanned: I2C 0x18 - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6695-MAX6696.pdf * Maxim MAX6696 @@ -345,9 +358,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6695-MAX6696.pdf * Winbond/Nuvoton W83L771W/G @@ -355,7 +368,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: No longer available + Datasheet: Publicly available at the DigiKey website + + https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/1128/W83L771W%2CW83L771G.pdf * Winbond/Nuvoton W83L771AWG/ASG @@ -381,7 +396,7 @@ Supported chips: Datasheet: Publicly available at Nuvoton website - https://www.nuvoton.com/resource-files/Nuvoton_NCT7717U_Datasheet_V111.pdf + https://www.nuvoton.com/resource-files/Nuvoton_NCT7717U_Datasheet_V111.pdf * Nuvoton NCT7718 @@ -391,7 +406,7 @@ Supported chips: Datasheet: Publicly available at Nuvoton website - https://www.nuvoton.com/resource-files/Nuvoton_NCT7718W_Datasheet_V11.pdf + https://www.nuvoton.com/resource-files/Nuvoton_NCT7718W_Datasheet_V11.pdf * Philips/NXP SA56004X @@ -401,7 +416,7 @@ Supported chips: Datasheet: Publicly available at NXP website - http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf + https://www.nxp.com/docs/en/data-sheet/SA56004X.pdf * GMT G781 @@ -437,7 +452,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheets: Publicly available at the Philips website + Datasheets: Publicly available at the DigiKey website + + https://www.digikey.com/htmldatasheets/production/97606/0/0/1/ne1617.pdf * Philips NE1618 @@ -445,7 +462,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheets: Publicly available at the Philips website + Datasheets: Publicly available at the DigiKey website + + https://media.digikey.com/pdf/Data%20Sheets/NXP%20PDFs/NE1618.pdf * Genesys Logic GL523SM @@ -453,7 +472,7 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: + Datasheet: No longer available at Genesys Logic website * TI THMC10 @@ -461,7 +480,7 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the TI website + Datasheet: No longer available at the TI website * Onsemi MC1066 @@ -469,7 +488,7 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Onsemi website + Datasheet: No longer available at the Onsemi website Author: Jean Delvare <jdelvare@suse.de> diff --git a/Documentation/hwmon/macsmc-hwmon.rst b/Documentation/hwmon/macsmc-hwmon.rst new file mode 100644 index 000000000000..6903f76df62b --- /dev/null +++ b/Documentation/hwmon/macsmc-hwmon.rst @@ -0,0 +1,71 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver macsmc-hwmon +========================== + +Supported hardware + + * Apple Silicon Macs (M1 and up) + +Author: James Calligeros <jcalligeros99@gmail.com> + +Description +----------- + +macsmc-hwmon exposes the Apple System Management controller's +temperature, voltage, current and power sensors, as well as +fan speed and control capabilities, via hwmon. + +Because each Apple Silicon Mac exposes a different set of sensors +(e.g. the MacBooks expose battery telemetry that is not present on +the desktop Macs), sensors present on any given machine are described +via Devicetree. The driver picks these up and registers them with +hwmon when probed. + +Manual fan speed is supported via the fan_control module parameter. This +is disabled by default and marked as unsafe, as it cannot be proven that +the system will fail safe if overheating due to manual fan control being +used. + +sysfs interface +--------------- + +currX_input + Ammeter value + +currX_label + Ammeter label + +fanX_input + Current fan speed + +fanX_label + Fan label + +fanX_min + Minimum possible fan speed + +fanX_max + Maximum possible fan speed + +fanX_target + Current fan setpoint + +inX_input + Voltmeter value + +inX_label + Voltmeter label + +powerX_input + Power meter value + +powerX_label + Power meter label + +tempX_input + Temperature sensor value + +tempX_label + Temperature sensor label + diff --git a/Documentation/hwmon/max127.rst b/Documentation/hwmon/max127.rst index dc192dd9c37c..09204b45f27b 100644 --- a/Documentation/hwmon/max127.rst +++ b/Documentation/hwmon/max127.rst @@ -13,7 +13,7 @@ Supported chips: Prefix: 'max127' - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX127-MAX128.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max127-max128.pdf Description ----------- diff --git a/Documentation/hwmon/max15301.rst b/Documentation/hwmon/max15301.rst index e2222e98304f..a0a993195cd1 100644 --- a/Documentation/hwmon/max15301.rst +++ b/Documentation/hwmon/max15301.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max15301.pdf * Maxim MAX15303 diff --git a/Documentation/hwmon/max16064.rst b/Documentation/hwmon/max16064.rst index c06249292557..2a8a76d7b230 100644 --- a/Documentation/hwmon/max16064.rst +++ b/Documentation/hwmon/max16064.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf + Datasheet: https://www.digikey.com/en/htmldatasheets/production/701833/0/0/1/max16064 Author: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/max16065.rst b/Documentation/hwmon/max16065.rst index 45f69f334f25..ac3dc6f023dd 100644 --- a/Documentation/hwmon/max16065.rst +++ b/Documentation/hwmon/max16065.rst @@ -12,7 +12,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16065-max16066.pdf * Maxim MAX16067 @@ -22,7 +22,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16067.pdf * Maxim MAX16068 @@ -32,7 +32,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16068.pdf * Maxim MAX16070/MAX16071 @@ -42,7 +42,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16070-max16071.pdf Author: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/max1619.rst b/Documentation/hwmon/max1619.rst index b5fc175ae18d..f134d0fa9bfd 100644 --- a/Documentation/hwmon/max1619.rst +++ b/Documentation/hwmon/max1619.rst @@ -9,9 +9,9 @@ Supported chips: Addresses scanned: I2C 0x18-0x1a, 0x29-0x2b, 0x4c-0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: - http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1619.pdf Authors: - Oleksij Rempel <bug-track@fisher-privat.net>, diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst index c8c63a053e40..3b1392bf547e 100644 --- a/Documentation/hwmon/max16601.rst +++ b/Documentation/hwmon/max16601.rst @@ -35,7 +35,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX16602.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max16602.pdf Author: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/max1668.rst b/Documentation/hwmon/max1668.rst index 417f17d750e6..e2b8a4056abe 100644 --- a/Documentation/hwmon/max1668.rst +++ b/Documentation/hwmon/max1668.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX1668-MAX1989.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1668-MAX1989.pdf Author: diff --git a/Documentation/hwmon/max17616.rst b/Documentation/hwmon/max17616.rst new file mode 100644 index 000000000000..a3dc429048ae --- /dev/null +++ b/Documentation/hwmon/max17616.rst @@ -0,0 +1,62 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver max17616 +====================== + +Supported chips: + + * Analog Devices MAX17616/MAX17616A + + Prefix: 'max17616' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max17616-max17616a.pdf + +Author: + + - Kim Seer Paller <kimseer.paller@analog.com> + + +Description +----------- + +This driver supports hardware monitoring for Analog Devices MAX17616/MAX17616A +Current-Limiter with OV/Surge, UV, Reverse Polarity, Loss of Ground Protection +with PMBus Interface. + +The MAX17616/MAX17616A is a 3V to 80V, 7A current-limiter with overvoltage, +surge, undervoltage, reverse polarity, and loss of ground protection. Through +the PMBus interface, the device can monitor input/output voltages, output current +and temperature. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate +the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst +for details. + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + +Sysfs entries +------------- + +================= ======================================== +in1_label "vin" +in1_input Measured input voltage +in1_alarm Input voltage alarm +in2_label "vout1" +in2_input Measured output voltage +curr1_label "iout1" +curr1_input Measured output current. +curr1_alarm Output current alarm +temp1_input Measured temperature +temp1_alarm Chip temperature alarm +================= ======================================== diff --git a/Documentation/hwmon/max197.rst b/Documentation/hwmon/max197.rst index 02fe19bc3428..00e16056823f 100644 --- a/Documentation/hwmon/max197.rst +++ b/Documentation/hwmon/max197.rst @@ -11,13 +11,13 @@ Supported chips: Prefix: 'max197' - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX197.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX197.pdf * Maxim MAX199 Prefix: 'max199' - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX199.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX199.pdf Description ----------- diff --git a/Documentation/hwmon/max20730.rst b/Documentation/hwmon/max20730.rst index cb0c95b2b1f6..0ce473bca889 100644 --- a/Documentation/hwmon/max20730.rst +++ b/Documentation/hwmon/max20730.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20710.pdf * Maxim MAX20730 @@ -19,7 +19,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20730.pdf * Maxim MAX20734 @@ -27,7 +27,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20734.pdf * Maxim MAX20743 @@ -35,7 +35,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20743.pdf Author: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/max31722.rst b/Documentation/hwmon/max31722.rst index 0ab15c00b226..b9d176ee7a69 100644 --- a/Documentation/hwmon/max31722.rst +++ b/Documentation/hwmon/max31722.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31722-max31723.pdf * Maxim Integrated MAX31723 @@ -21,7 +21,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31722-max31723.pdf Author: Tiberiu Breana <tiberiu.a.breana@intel.com> diff --git a/Documentation/hwmon/max31730.rst b/Documentation/hwmon/max31730.rst index def0de19dbd2..1c5a32b64187 100644 --- a/Documentation/hwmon/max31730.rst +++ b/Documentation/hwmon/max31730.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: 0x1c, 0x1d, 0x1e, 0x1f, 0x4c, 0x4d, 0x4e, 0x4f - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31730.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31730.pdf Author: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/max31785.rst b/Documentation/hwmon/max31785.rst index c8c6756d0ee1..92817436759e 100644 --- a/Documentation/hwmon/max31785.rst +++ b/Documentation/hwmon/max31785.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31785.pdf Author: Andrew Jeffery <andrew@aj.id.au> diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst index 33c5c7330efc..b8af2d907b6e 100644 --- a/Documentation/hwmon/max31790.rst +++ b/Documentation/hwmon/max31790.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://pdfserv.maximintegrated.com/en/ds/MAX31790.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31790.pdf Author: Il Han <corone.il.han@gmail.com> diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst index 6cc5088b26b7..ddd039529077 100644 --- a/Documentation/hwmon/max31827.rst +++ b/Documentation/hwmon/max31827.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: I2C 0x40 - 0x5f - Datasheet: Publicly available at the Analog Devices website + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf * Maxim MAX31828 @@ -19,7 +19,7 @@ Supported chips: Addresses scanned: I2C 0x40 - 0x5f - Datasheet: Publicly available at the Analog Devices website + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf * Maxim MAX31829 @@ -27,7 +27,7 @@ Supported chips: Addresses scanned: I2C 0x40 - 0x5f - Datasheet: Publicly available at the Analog Devices website + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf Authors: diff --git a/Documentation/hwmon/max34440.rst b/Documentation/hwmon/max34440.rst index 8591a7152ce5..d6d4fbc863d9 100644 --- a/Documentation/hwmon/max34440.rst +++ b/Documentation/hwmon/max34440.rst @@ -11,13 +11,21 @@ Supported chips: Datasheet: - + * ADI ADPM12200 + + Prefixes: 'adpm12200' + + Addresses scanned: - + + Datasheet: - + * Maxim MAX34440 Prefixes: 'max34440' Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34440.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34440.pdf * Maxim MAX34441 @@ -27,7 +35,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34441.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34441.pdf * Maxim MAX34446 @@ -37,7 +45,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34446.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34446.pdf * Maxim MAX34451 @@ -47,7 +55,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34451.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34451.pdf * Maxim MAX34460 @@ -57,7 +65,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34460.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34460.pdf * Maxim MAX34461 @@ -67,7 +75,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34461.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34461.pdf Author: Guenter Roeck <linux@roeck-us.net> @@ -79,10 +87,11 @@ This driver supports multiple devices: hardware monitoring for Maxim MAX34440 PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and -MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring -voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12 -voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260 -also monitors both input and output of voltage and current. +MAX34461; PMBus DC/DC Power Module ADPM12160, and ADPM12200. The MAX34451 +supports monitoring voltage or current of 12 channels based on GIN pins. The +MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage +channels. The ADPM12160, and ADPM12200 also monitors both input and output +of voltage and current. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. @@ -140,7 +149,8 @@ in[1-6]_reset_history Write any value to reset history. .. note:: - MAX34446 only supports in[1-4]. - - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively. + - ADPM12160, and ADPM12200 only supports in[1-2]. Label is "vin1" + and "vout1" respectively. Curr ~~~~ @@ -162,7 +172,8 @@ curr[1-6]_reset_history Write any value to reset history. - in6 and curr6 attributes only exist for MAX34440. - MAX34446 only supports curr[1-4]. - - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5]. + - For ADPM12160, and ADPM12200, curr[1] is "iin1" and curr[2-6] + are "iout[1-5]". Power ~~~~~ @@ -198,7 +209,7 @@ temp[1-8]_reset_history Write any value to reset history. .. note:: - temp7 and temp8 attributes only exist for MAX34440. - MAX34446 only supports temp[1-3]. - - ADPM12160 only supports temp[1]. + - ADPM12160, and ADPM12200 only supports temp[1]. .. note:: diff --git a/Documentation/hwmon/max6639.rst b/Documentation/hwmon/max6639.rst index c85d285a3489..492c13a5880d 100644 --- a/Documentation/hwmon/max6639.rst +++ b/Documentation/hwmon/max6639.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: I2C 0x2c, 0x2e, 0x2f - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6639-max6639f.pdf Authors: - He Changqing <hechangqing@semptian.com> diff --git a/Documentation/hwmon/max6650.rst b/Documentation/hwmon/max6650.rst index 7952b6ecaa2d..427f353c5e9c 100644 --- a/Documentation/hwmon/max6650.rst +++ b/Documentation/hwmon/max6650.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: none - Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6650-MAX6651.pdf * Maxim MAX6651 @@ -17,7 +17,7 @@ Supported chips: Addresses scanned: none - Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6650-MAX6651.pdf Authors: - Hans J. Koch <hjk@hansjkoch.de> diff --git a/Documentation/hwmon/max6697.rst b/Documentation/hwmon/max6697.rst index 90ca224c446a..5b37ff08ff44 100644 --- a/Documentation/hwmon/max6697.rst +++ b/Documentation/hwmon/max6697.rst @@ -7,61 +7,61 @@ Supported chips: Prefix: 'max6581' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6581.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6581.pdf * Maxim MAX6602 Prefix: 'max6602' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6602.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6602.pdf * Maxim MAX6622 Prefix: 'max6622' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6622.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6622.pdf * Maxim MAX6636 Prefix: 'max6636' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6636.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6636.pdf * Maxim MAX6689 Prefix: 'max6689' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6689.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6689.pdf * Maxim MAX6693 Prefix: 'max6693' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6693.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6693.pdf * Maxim MAX6694 Prefix: 'max6694' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6694.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6694.pdf * Maxim MAX6697 Prefix: 'max6697' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6697.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6697.pdf * Maxim MAX6698 Prefix: 'max6698' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6698.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6698.pdf * Maxim MAX6699 Prefix: 'max6699' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6699.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6699.pdf Author: diff --git a/Documentation/hwmon/max77705.rst b/Documentation/hwmon/max77705.rst index 4a7680a340e1..5202de614647 100644 --- a/Documentation/hwmon/max77705.rst +++ b/Documentation/hwmon/max77705.rst @@ -11,7 +11,9 @@ Supported chips: Addresses scanned: none - Datasheet: Not available + Datasheet: + + https://www.analog.com/media/en/technical-documentation/data-sheets/max77505.pdf Authors: - Dzmitry Sankouski <dsankouski@gmail.com> diff --git a/Documentation/hwmon/max8688.rst b/Documentation/hwmon/max8688.rst index 71e7f2cbe2e2..71b6b9ee90ab 100644 --- a/Documentation/hwmon/max8688.rst +++ b/Documentation/hwmon/max8688.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max8688.pdf Author: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/mp2925.rst b/Documentation/hwmon/mp2925.rst new file mode 100644 index 000000000000..63eda215b6cb --- /dev/null +++ b/Documentation/hwmon/mp2925.rst @@ -0,0 +1,151 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2925 +==================== + +Supported chips: + + * MPS mp2925 + + Prefix: 'mp2925' + + * MPS mp2929 + + Prefix: 'mp2929' + +Author: + + Wensheng Wang <wenswang@yeah.net> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2925 Dual Loop Digital Multi-phase Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +**curr2_crit** + +**curr2_crit_alarm** + +**curr2_max** + +**curr2_max_alarm** + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power2_input** + +**power2_label** + +The driver provides the following attributes for output power: + +**power3_input** + +**power3_label** + +**power4_input** + +**power4_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/Documentation/hwmon/mp9945.rst b/Documentation/hwmon/mp9945.rst new file mode 100644 index 000000000000..f406f96efcf9 --- /dev/null +++ b/Documentation/hwmon/mp9945.rst @@ -0,0 +1,117 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp9945 +===================== + +Supported chips: + + * MPS mp9945 + + Prefix: 'mp9945' + +Author: + + Cosmo Chou <chou.cosmo@gmail.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP9945 Digital Single-phase Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_min** + +**in2_min_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +**curr2_crit** + +**curr2_crit_alarm** + +**curr2_max** + +**curr2_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +The driver provides the following attributes for output power: + +**power2_input** + +**power2_label** + +**power2_max** + +**power2_max_alarm** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst index d477124cf67f..a8e01a5b96da 100644 --- a/Documentation/hwmon/pmbus.rst +++ b/Documentation/hwmon/pmbus.rst @@ -74,7 +74,7 @@ Supported chips: Datasheet: - Not published + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX20796.pdf * Generic PMBus devices diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst index c85db7b32941..0143ce0e5db7 100644 --- a/Documentation/hwmon/sy7636a-hwmon.rst +++ b/Documentation/hwmon/sy7636a-hwmon.rst @@ -17,10 +17,10 @@ the Silergy SY7636A PMIC. The following sensors are supported * Temperature - - SoC on-die temperature in milli-degree C + - Temperature of external NTC in milli-degree C sysfs-Interface --------------- temp0_input - - SoC on-die temperature (milli-degree C) + - Temperature of external NTC (milli-degree C) diff --git a/Documentation/hwmon/tsc1641.rst b/Documentation/hwmon/tsc1641.rst new file mode 100644 index 000000000000..425e25f7a7d1 --- /dev/null +++ b/Documentation/hwmon/tsc1641.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver tsc1641 +===================== + +Supported chips: + + * ST TSC1641 + + Prefix: 'tsc1641' + + Addresses scanned: - + + Datasheet: + https://www.st.com/resource/en/datasheet/tsc1641.pdf + +Author: + - Igor Reznichenko <igor@reznichenko.net> + + +Description +----------- + +The TSC1641 is a high-precision current, voltage, power, and temperature +monitoring analog front-end (AFE). It monitors bidirectional current into a +shunt resistor and load voltage up to 60 V in a synchronized way. Digital bus +interface is I2C/SMbus. The TSC1641 allows the assertion of several alerts +regarding the voltage, current, power and temperature. + +Usage Notes +----------- + +The TSC1641 driver requires the value of the external shunt resistor to +correctly compute current and power measurements. The resistor value, in +micro-ohms, should be provided either through the device tree property +"shunt-resistor-micro-ohms" or via writable sysfs attribute "shunt_resistor". +Please refer to the Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml +for bindings if the device tree is used. + +Supported range of shunt resistor values is from 100 uOhm to 655.35 mOhm, in +10 uOhm steps. +When selecting the value keep in mind device maximum DC power measurement is +1600W. See datasheet p.22 for ST recommendations on selecting shunt value. + +If the shunt resistor value is not specified in the device tree, the driver +initializes it to 1000 uOhm by default. Users may configure the correct shunt +resistor value at runtime by writing to the "shunt_resistor" sysfs attribute. + +The driver only supports continuous operating mode. +Measurement ranges: + +================ =============================================================== +Current Bidirectional, dependent on shunt +Bus voltage 0-60V +Maximum DC power 1600W +Temperature -40C to +125C +================ =============================================================== + +Sysfs entries +------------- + +==================== =========================================================== +in0_input bus voltage (mV) +in0_max bus voltage max alarm limit (mV) +in0_max_alarm bus voltage max alarm limit exceeded +in0_min bus voltage min alarm limit (mV) +in0_min_alarm bus voltage min alarm limit exceeded + +curr1_input current measurement (mA) +curr1_max current max alarm limit (mA) +curr1_max_alarm current max alarm limit exceeded +curr1_min current min alarm limit (mA) +curr1_min_alarm current min alarm limit exceeded + +power1_input power measurement (uW) +power1_max power max alarm limit (uW) +power1_max_alarm power max alarm limit exceeded + +shunt_resistor shunt resistor value (uOhms) + +temp1_input temperature measurement (mdegC) +temp1_max temperature max alarm limit (mdegC) +temp1_max_alarm temperature max alarm limit exceeded + +update_interval data conversion time (1 - 33ms), longer conversion time + corresponds to higher effective resolution in bits +==================== ===========================================================
\ No newline at end of file diff --git a/Documentation/hwmon/zl6100.rst b/Documentation/hwmon/zl6100.rst index d42ed9d3ac69..1513c9d2d461 100644 --- a/Documentation/hwmon/zl6100.rst +++ b/Documentation/hwmon/zl6100.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet * Renesas / Intersil / Zilker Labs ZL2005 @@ -17,7 +17,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet * Renesas / Intersil / Zilker Labs ZL2006 @@ -25,7 +25,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet * Renesas / Intersil / Zilker Labs ZL2008 @@ -33,7 +33,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet * Renesas / Intersil / Zilker Labs ZL2105 @@ -41,7 +41,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet * Renesas / Intersil / Zilker Labs ZL2106 @@ -49,7 +49,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2106-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2106-datasheet * Renesas / Intersil / Zilker Labs ZL6100 @@ -57,7 +57,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl6100-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl6100-datasheet * Renesas / Intersil / Zilker Labs ZL6105 @@ -65,7 +65,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl6105-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl6105-datasheet * Renesas / Intersil / Zilker Labs ZL8802 diff --git a/Documentation/leds/leds-lp5521.rst b/Documentation/leds/leds-lp5521.rst index 0432615b083d..4c838c88820e 100644 --- a/Documentation/leds/leds-lp5521.rst +++ b/Documentation/leds/leds-lp5521.rst @@ -22,7 +22,7 @@ More details of the instructions can be found from the public data sheet. LP5521 has the internal program memory for running various LED patterns. There are two ways to run LED patterns. -1) Legacy interface - enginex_mode and enginex_load +1) sysfs interface - enginex_mode and enginex_load Control interface for the engines: x is 1 .. 3 diff --git a/Documentation/leds/leds-lp5523.rst b/Documentation/leds/leds-lp5523.rst index 7d7362a1dd57..f5a87b07514a 100644 --- a/Documentation/leds/leds-lp5523.rst +++ b/Documentation/leds/leds-lp5523.rst @@ -35,7 +35,7 @@ If both fields are NULL, 'lp5523' is used by default. LP5523 has the internal program memory for running various LED patterns. There are two ways to run LED patterns. -1) Legacy interface - enginex_mode, enginex_load and enginex_leds +1) sysfs interface - enginex_mode, enginex_load and enginex_leds Control interface for the engines: diff --git a/Documentation/power/power_supply_class.rst b/Documentation/power/power_supply_class.rst index da8e275a14ff..6d11f8c594a0 100644 --- a/Documentation/power/power_supply_class.rst +++ b/Documentation/power/power_supply_class.rst @@ -7,35 +7,35 @@ Synopsis Power supply class used to represent battery, UPS, AC or DC power supply properties to user-space. -It defines core set of attributes, which should be applicable to (almost) +It defines a core set of attributes which should be applicable to (almost) every power supply out there. Attributes are available via sysfs and uevent interfaces. -Each attribute has well defined meaning, up to unit of measure used. While +Each attribute has a well-defined meaning, up to the unit of measure used. While the attributes provided are believed to be universally applicable to any power supply, specific monitoring hardware may not be able to provide them all, so any of them may be skipped. -Power supply class is extensible, and allows to define drivers own attributes. -The core attribute set is subject to the standard Linux evolution (i.e. -if it will be found that some attribute is applicable to many power supply -types or their drivers, it can be added to the core set). +The power supply class is extensible and allows drivers to define their own +attributes. The core attribute set is subject to the standard Linux evolution +(i.e., if some attribute is found to be applicable to many power +supply types or their drivers, it can be added to the core set). -It also integrates with LED framework, for the purpose of providing +It also integrates with the LED framework, for the purpose of providing typically expected feedback of battery charging/fully charged status and AC/USB power supply online status. (Note that specific details of the indication (including whether to use it at all) are fully controllable by -user and/or specific machine defaults, per design principles of LED -framework). +user and/or specific machine defaults, per design principles of the LED +framework.) Attributes/properties ~~~~~~~~~~~~~~~~~~~~~ -Power supply class has predefined set of attributes, this eliminates code -duplication across drivers. Power supply class insist on reusing its +The power supply class has a predefined set of attributes. This eliminates code +duplication across drivers. The power supply class insists on reusing its predefined attributes *and* their units. -So, userspace gets predictable set of attributes and their units for any +So, userspace gets a predictable set of attributes and their units for any kind of power supply, and can process/present them to a user in consistent manner. Results for different power supplies and machines are also directly comparable. @@ -61,7 +61,7 @@ Attributes/properties detailed | **Charge/Energy/Capacity - how to not confuse** | +--------------------------------------------------------------------------+ | **Because both "charge" (µAh) and "energy" (µWh) represents "capacity" | -| of battery, this class distinguish these terms. Don't mix them!** | +| of battery, this class distinguishes these terms. Don't mix them!** | | | | - `CHARGE_*` | | attributes represents capacity in µAh only. | @@ -81,7 +81,7 @@ _NOW STATUS this attribute represents operating status (charging, full, - discharging (i.e. powering a load), etc.). This corresponds to + discharging (i.e., powering a load), etc.). This corresponds to `BATTERY_STATUS_*` values, as defined in battery.h. CHARGE_TYPE @@ -92,10 +92,10 @@ CHARGE_TYPE AUTHENTIC indicates the power supply (battery or charger) connected - to the platform is authentic(1) or non authentic(0). + to the platform is authentic(1) or non-authentic(0). HEALTH - represents health of the battery, values corresponds to + represents health of the battery. Values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. VOLTAGE_OCV @@ -103,11 +103,11 @@ VOLTAGE_OCV VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN design values for maximal and minimal power supply voltages. - Maximal/minimal means values of voltages when battery considered + Maximal/minimal means values of voltages when battery is considered "full"/"empty" at normal conditions. Yes, there is no direct relation between voltage and battery capacity, but some dumb batteries use voltage for very approximated calculation of capacity. - Battery driver also can use this attribute just to inform userspace + A battery driver also can use this attribute just to inform userspace about maximal and minimal voltage thresholds of a given battery. VOLTAGE_MAX, VOLTAGE_MIN @@ -122,16 +122,16 @@ CURRENT_BOOT Reports the current measured during boot CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN - design charge values, when battery considered full/empty. + design charge values, when battery is considered full/empty. ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN same as above but for energy. CHARGE_FULL, CHARGE_EMPTY - These attributes means "last remembered value of charge when battery - became full/empty". It also could mean "value of charge when battery + These attributes mean "last remembered value of charge when battery + became full/empty". They also could mean "value of charge when battery is considered full/empty at given conditions (temperature, age)". - I.e. these attributes represents real thresholds, not design values. + I.e., these attributes represents real thresholds, not design values. ENERGY_FULL, ENERGY_EMPTY same as above but for energy. @@ -153,12 +153,12 @@ CHARGE_TERM_CURRENT CONSTANT_CHARGE_CURRENT constant charge current programmed by charger. - CONSTANT_CHARGE_CURRENT_MAX maximum charge current supported by the power supply object. CONSTANT_CHARGE_VOLTAGE constant charge voltage programmed by charger. + CONSTANT_CHARGE_VOLTAGE_MAX maximum charge voltage supported by the power supply object. @@ -208,10 +208,10 @@ TEMP_MAX TIME_TO_EMPTY seconds left for battery to be considered empty - (i.e. while battery powers a load) + (i.e., while battery powers a load) TIME_TO_FULL seconds left for battery to be considered full - (i.e. while battery is charging) + (i.e., while battery is charging) Battery <-> external power supply interaction @@ -220,13 +220,13 @@ Often power supplies are acting as supplies and supplicants at the same time. Batteries are good example. So, batteries usually care if they're externally powered or not. -For that case, power supply class implements notification mechanism for +For that case, the power supply class implements a notification mechanism for batteries. -External power supply (AC) lists supplicants (batteries) names in +An external power supply (AC) lists supplicants (batteries) names in "supplied_to" struct member, and each power_supply_changed() call -issued by external power supply will notify supplicants via -external_power_changed callback. +issued by an external power supply will notify supplicants via +the external_power_changed callback. Devicetree battery characteristics @@ -241,14 +241,14 @@ battery node have names corresponding to elements in enum power_supply_property, for naming consistency between sysfs attributes and battery node properties. -QA -~~ +Q&A +~~~ Q: Where is POWER_SUPPLY_PROP_XYZ attribute? A: - If you cannot find attribute suitable for your driver needs, feel free - to add it and send patch along with your driver. + If you cannot find an attribute suitable for your driver needs, feel free + to add it and send a patch along with your driver. The attributes available currently are the ones currently provided by the drivers written. @@ -258,18 +258,18 @@ A: Q: - I have some very specific attribute (e.g. battery color), should I add + I have some very specific attribute (e.g., battery color). Should I add this attribute to standard ones? A: Most likely, no. Such attribute can be placed in the driver itself, if - it is useful. Of course, if the attribute in question applicable to - large set of batteries, provided by many drivers, and/or comes from + it is useful. Of course, if the attribute in question is applicable to + a large set of batteries, provided by many drivers, and/or comes from some general battery specification/standard, it may be a candidate to be added to the core attribute set. Q: - Suppose, my battery monitoring chip/firmware does not provides capacity + Suppose my battery monitoring chip/firmware does not provide capacity in percents, but provides charge_{now,full,empty}. Should I calculate percentage capacity manually, inside the driver, and register CAPACITY attribute? The same question about time_to_empty/time_to_full. @@ -278,11 +278,11 @@ A: directly measurable by the specific hardware available. Inferring not available properties using some heuristics or mathematical - model is not subject of work for a battery driver. Such functionality + model is not a subject of work for a battery driver. Such functionality should be factored out, and in fact, apm_power, the driver to serve - legacy APM API on top of power supply class, uses a simple heuristic of + legacy APM API on top of the power supply class, uses a simple heuristic of approximating remaining battery capacity based on its charge, current, - voltage and so on. But full-fledged battery model is likely not subject - for kernel at all, as it would require floating point calculation to deal - with things like differential equations and Kalman filters. This is + voltage and so on. But a full-fledged battery model is likely not a subject + for the kernel at all, as it would require floating point calculations to + deal with things like differential equations and Kalman filters. This is better be handled by batteryd/libbattery, yet to be written. diff --git a/Documentation/userspace-api/dma-buf-heaps.rst b/Documentation/userspace-api/dma-buf-heaps.rst index 1dfe5e7acd5a..05445c83b79a 100644 --- a/Documentation/userspace-api/dma-buf-heaps.rst +++ b/Documentation/userspace-api/dma-buf-heaps.rst @@ -16,13 +16,52 @@ following heaps: - The ``system`` heap allocates virtually contiguous, cacheable, buffers. - - The ``cma`` heap allocates physically contiguous, cacheable, - buffers. Only present if a CMA region is present. Such a region is - usually created either through the kernel commandline through the - ``cma`` parameter, a memory region Device-Tree node with the - ``linux,cma-default`` property set, or through the ``CMA_SIZE_MBYTES`` or - ``CMA_SIZE_PERCENTAGE`` Kconfig options. The heap's name in devtmpfs is - ``default_cma_region``. For backwards compatibility, when the - ``DMABUF_HEAPS_CMA_LEGACY`` Kconfig option is set, a duplicate node is - created following legacy naming conventions; the legacy name might be - ``reserved``, ``linux,cma``, or ``default-pool``. + - The ``default_cma_region`` heap allocates physically contiguous, + cacheable, buffers. Only present if a CMA region is present. Such a + region is usually created either through the kernel commandline + through the ``cma`` parameter, a memory region Device-Tree node with + the ``linux,cma-default`` property set, or through the + ``CMA_SIZE_MBYTES`` or ``CMA_SIZE_PERCENTAGE`` Kconfig options. Prior + to Linux 6.17, its name wasn't stable and could be called + ``reserved``, ``linux,cma``, or ``default-pool``, depending on the + platform. + + - A heap will be created for each reusable region in the device tree + with the ``shared-dma-pool`` compatible, using the full device tree + node name as its name. The buffer semantics are identical to + ``default-cma-region``. + +Naming Convention +================= + +``dma-buf`` heaps name should meet a number of constraints: + +- The name must be stable, and must not change from one version to the other. + Userspace identifies heaps by their name, so if the names ever change, we + would be likely to introduce regressions. + +- The name must describe the memory region the heap will allocate from, and + must uniquely identify it in a given platform. Since userspace applications + use the heap name as the discriminant, it must be able to tell which heap it + wants to use reliably if there's multiple heaps. + +- The name must not mention implementation details, such as the allocator. The + heap driver will change over time, and implementation details when it was + introduced might not be relevant in the future. + +- The name should describe properties of the buffers that would be allocated. + Doing so will make heap identification easier for userspace. Such properties + are: + + - ``contiguous`` for physically contiguous buffers; + + - ``protected`` for encrypted buffers not accessible the OS; + +- The name may describe intended usage. Doing so will make heap identification + easier for userspace applications and users. + +For example, assuming a platform with a reserved memory region located +at the RAM address 0x42000000, intended to allocate video framebuffers, +physically contiguous, and backed by the CMA kernel allocator, good +names would be ``memory@42000000-contiguous`` or ``video@42000000``, but +``cma-video`` wouldn't. |