diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi | 191 |
1 files changed, 180 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi index 88c2657b50e6..c6f5aa38ebf9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi @@ -16,6 +16,10 @@ model = "PHYTEC phyCORE-i.MX93"; compatible = "phytec,imx93-phycore-som", "fsl,imx93"; + aliases { + ethernet0 = &fec; + }; + reserved-memory { ranges; #address-cells = <2>; @@ -42,6 +46,19 @@ linux,default-trigger = "heartbeat"; }; }; + + reg_vdda_1v8: regulator-vdda-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&buck5>; + }; +}; + +/* ADC */ +&adc1 { + vref-supply = <®_vdda_1v8>; }; /* Ethernet */ @@ -72,17 +89,115 @@ }; }; +/* I2C3 */ +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <610000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "VDDQ_0V6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: BUCK4 { + regulator-name = "VDD_3V3_BUCK"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "VDD_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "PMIC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "VDD_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + /* EEPROM */ + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&buck4>; + }; +}; + /* eMMC */ &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <8>; non-removable; + no-1-8-v; status = "okay"; }; /* Watchdog */ &wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; status = "okay"; }; @@ -104,23 +219,77 @@ pinctrl_leds: ledsgrp { fsl,pins = < - MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x11e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX93_PAD_ENET2_RD3__GPIO4_IO27 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x179e - MX93_PAD_SD1_CMD__USDHC1_CMD 0x1386 - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x138e - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x1386 - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x138e - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x1386 - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x1386 - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x1386 - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x1386 - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x1386 + MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001386 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001386 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001386 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001386 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001386 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001386 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001386 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000139e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013be + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000139e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000139e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000139e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000139e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000139e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000139e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013be + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013be + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013be + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013be + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013be + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013be + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013be MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e + >; + }; }; |