diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi | 45 |
1 files changed, 42 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi index 142244d52706..4203b335a263 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -83,9 +83,7 @@ /* On-module TI DP83825I PHY but no connector, enable in carrierboard */ &gmac { - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; + phy-handle = <&dp83825>; phy-supply = <&vcc_3v3>; clock_in_out = "output"; }; @@ -344,6 +342,18 @@ status = "okay"; }; +&mdio { + dp83825: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&phy_rst>; + reset-assert-us = <50000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; +}; + &pinctrl { emmc { emmc_reset: emmc-reset { @@ -351,6 +361,12 @@ }; }; + ethernet { + phy_rst: phy-rst { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { module_led_pin: module-led-pin { rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -363,6 +379,18 @@ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + spi1 { + spi1_csn0_gpio_pin: spi1-csn0-gpio-pin { + rockchip,pins = + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + + spi1_csn1_gpio_pin: spi1-csn1-gpio-pin { + rockchip,pins = + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; }; &pmu_io_domains { @@ -380,6 +408,17 @@ vqmmc-supply = <&vccio_sd>; }; +&spi1 { + /* + * Hardware CS has a very slow rise time of about 6us, + * causing transmission errors. + * With cs-gpios we have a rise time of about 20ns. + */ + cs-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>, <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0_gpio_pin &spi1_csn1_gpio_pin &spi1_miso &spi1_mosi>; +}; + &tsadc { status = "okay"; }; |