summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts')
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts253
1 files changed, 239 insertions, 14 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
index 801b40fea4e8..101e2ee9766d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
@@ -196,6 +196,30 @@
vin-supply = <&vcc_12v0_dcin>;
};
+ vcc_5v0_typec0: regulator-vcc-5v0-typec0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg0_pwren>;
+ regulator-name = "vcc_5v0_typec0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_device>;
+ };
+
+ vcc_5v0_usbhost: regulator-vcc-5v0-usbhost {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren>;
+ regulator-name = "vcc_5v0_usbhost";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_device>;
+ };
+
vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_ufs_s0";
@@ -205,6 +229,19 @@
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_5v0_sys>;
};
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on>;
+ reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&combphy1_psu {
+ status = "okay";
};
&combphy0_ps {
@@ -246,30 +283,20 @@
&gmac0 {
phy-mode = "rgmii-id";
clock_in_out = "output";
-
- snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 20000 100000>;
-
+ phy-handle = <&rgmii_phy0>;
pinctrl-names = "default";
pinctrl-0 = <&eth0m0_miim
&eth0m0_tx_bus2
&eth0m0_rx_bus2
&eth0m0_rgmii_clk
&eth0m0_rgmii_bus>;
-
- phy-handle = <&rgmii_phy0>;
status = "okay";
};
&gmac1 {
phy-mode = "rgmii-id";
clock_in_out = "output";
-
- snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 20000 100000>;
-
+ phy-handle = <&rgmii_phy1>;
pinctrl-names = "default";
pinctrl-0 = <&eth1m0_miim
&eth1m0_tx_bus2
@@ -277,8 +304,6 @@
&eth1m0_rgmii_clk
&eth1m0_rgmii_bus
&ethm0_clk1_25m_out>;
-
- phy-handle = <&rgmii_phy1>;
status = "okay";
};
@@ -671,6 +696,58 @@
&i2c2 {
status = "okay";
+ usbc0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_interrupt>;
+ vbus-supply = <&vcc_5v0_typec0>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ /* fusb302 supports PD Rev 2.0 Ver 1.2 */
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+ power-role = "source";
+ source-pdos = <PDO_FIXED(5000, 2000,
+ PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
+
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0xffffffff>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs_ep: endpoint {
+ remote-endpoint = <&usb_drd0_hs_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usbc0_ss_ep: endpoint {
+ remote-endpoint = <&usb_drd0_ss_ep>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usbc0_dp_ep: endpoint {
+ remote-endpoint = <&usbdp_phy_ep>;
+ };
+ };
+ };
+ };
+ };
+
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -708,6 +785,11 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
};
};
@@ -716,6 +798,11 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
};
};
@@ -728,6 +815,15 @@
};
&pinctrl {
+ gmac {
+ gmac0_rst: gmac0-rst {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ gmac1_rst: gmac1-rst {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
headphone {
hp_det: hp-det {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -757,6 +853,48 @@
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ usb {
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ usb_otg0_pwren: usb-otg0-pwren {
+ rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ usbc0_interrupt: usbc0-interrupt {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ usbc0_sbu1: usbc0-sbu1 {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ usbc0_sbu2: usbc0-sbu2 {
+ rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wireless-bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wireless-wlan {
+ wifi_wake_host: wifi-wake-host {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ wifi_reg_on: wifi-reg-on {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&sai1 {
@@ -784,6 +922,23 @@
status = "okay";
};
+&sdio {
+ bus-width = <4>;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-sd;
+ no-mmc;
+ non-removable;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc_1v8_s3>;
+ wakeup-source;
+ status = "okay";
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -798,11 +953,81 @@
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc_5v0_usbhost>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-0 = <&uart0m0_xfer>;
status = "okay";
};
+/* Used by Bluetooth modules, enabled in a version specific overlay */
+&uart4 {
+ pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&usb_drd0_dwc3 {
+ usb-role-switch;
+ dr_mode = "otg";
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_drd0_hs_ep: endpoint {
+ remote-endpoint = <&usbc0_hs_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usb_drd0_ss_ep: endpoint {
+ remote-endpoint = <&usbc0_ss_ep>;
+ };
+ };
+ };
+};
+
+&usb_drd1_dwc3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbdp_phy {
+ mode-switch;
+ orientation-switch;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>;
+ sbu1-dc-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ usbdp_phy_ep: endpoint {
+ remote-endpoint = <&usbc0_dp_ep>;
+ };
+ };
+};
+
&vop {
status = "okay";
};
generated by cgit (git 2.34.1) at 2025-08-02 18:08:26 +0000