diff options
Diffstat (limited to 'arch/arm64')
369 files changed, 29191 insertions, 8105 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 393d71124f5d..7c456aa838b9 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -21,8 +21,6 @@ config ARM64 select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE select ARCH_HAS_CACHE_LINE_SIZE select ARCH_HAS_CC_PLATFORM - select ARCH_HAS_CRC32 - select ARCH_HAS_CRC_T10DIF if KERNEL_MODE_NEON select ARCH_HAS_CURRENT_STACK_POINTER select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEBUG_VM_PGTABLE @@ -187,12 +185,12 @@ config ARM64 select HAVE_ARCH_KCSAN if EXPERT select HAVE_ARCH_KFENCE select HAVE_ARCH_KGDB + select HAVE_ARCH_KSTACK_ERASE select HAVE_ARCH_MMAP_RND_BITS select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT select HAVE_ARCH_PREL32_RELOCATIONS select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET select HAVE_ARCH_SECCOMP_FILTER - select HAVE_ARCH_STACKLEAK select HAVE_ARCH_THREAD_STRUCT_WHITELIST select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index a541bb029aa4..90d6b028fbbb 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -40,6 +40,12 @@ config ARCH_APPLE This enables support for Apple's in-house ARM SoC family, such as the Apple M1. +config ARCH_AXIADO + bool "Axiado SoC Family" + select GPIOLIB + help + This enables support for Axiado SoC family like AX3000 + menuconfig ARCH_BCM bool "Broadcom SoC Support" @@ -106,6 +112,12 @@ config ARCH_BLAIZE help This enables support for the Blaize SoC family +config ARCH_CIX + bool "Cixtech SoC family" + help + This enables support for the Cixtech SoC family, + like P1(sky1). + config ARCH_EXYNOS bool "Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG @@ -135,11 +147,7 @@ config ARCH_SPARX5 config ARCH_K3 bool "Texas Instruments Inc. K3 multicore SoC architecture" - select PM_GENERIC_DOMAINS if PM - select MAILBOX select SOC_TI - select TI_MESSAGE_MANAGER - select TI_SCI_PROTOCOL select TI_K3_SOCINFO help This enables support for Texas Instruments' K3 multicore SoC @@ -178,6 +186,14 @@ config ARCH_MESON This enables support for the arm64 based Amlogic SoCs such as the s905, S905X/D, S912, A113X/D or S905X/D2 +config ARCH_MMP + bool "Marvell MMP SoC Family" + select PINCTRL + select PINCTRL_SINGLE + help + This enables support for Marvell MMP SoC family, currently + supporting PXA1908 aka IAP140. + config ARCH_MVEBU bool "Marvell EBU SoC Family" select ARMADA_AP806_SYSCON @@ -307,6 +323,12 @@ config ARCH_INTEL_SOCFPGA Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, Agilex and eASIC N5X. +config ARCH_SOPHGO + bool "Sophgo SoCs" + select ARCH_HAS_RESET_CONTROLLER + help + This enables support for Sophgo SoC platform hardware. + config ARCH_STM32 bool "STMicroelectronics STM32 SoC Family" select GPIOLIB diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 79b73a21ddc2..b0844404eda1 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -9,10 +9,12 @@ subdir-y += amlogic subdir-y += apm subdir-y += apple subdir-y += arm +subdir-y += axiado subdir-y += bitmain subdir-y += blaize subdir-y += broadcom subdir-y += cavium +subdir-y += cix subdir-y += exynos subdir-y += freescale subdir-y += hisilicon @@ -28,6 +30,7 @@ subdir-y += realtek subdir-y += renesas subdir-y += rockchip subdir-y += socionext +subdir-y += sophgo subdir-y += sprd subdir-y += st subdir-y += synaptics diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts index 99d2c4f1fc5a..dae9968a4ff6 100644 --- a/arch/arm64/boot/dts/airoha/en7581-evb.dts +++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts @@ -98,3 +98,11 @@ &i2c0 { status = "okay"; }; + +ð { + status = "okay"; +}; + +&gdm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi index 536ece69b935..ff6908a76e8e 100644 --- a/arch/arm64/boot/dts/airoha/en7581.dtsi +++ b/arch/arm64/boot/dts/airoha/en7581.dtsi @@ -346,5 +346,54 @@ status = "disabled"; }; + + eth: ethernet@1fb50000 { + compatible = "airoha,en7581-eth"; + reg = <0 0x1fb50000 0 0x2600>, + <0 0x1fb54000 0 0x2000>, + <0 0x1fb56000 0 0x2000>; + reg-names = "fe", "qdma0", "qdma1"; + + resets = <&scuclk EN7581_FE_RST>, + <&scuclk EN7581_FE_PDMA_RST>, + <&scuclk EN7581_FE_QDMA_RST>, + <&scuclk EN7581_XSI_MAC_RST>, + <&scuclk EN7581_DUAL_HSI0_MAC_RST>, + <&scuclk EN7581_DUAL_HSI1_MAC_RST>, + <&scuclk EN7581_HSI_MAC_RST>, + <&scuclk EN7581_XFP_MAC_RST>; + reset-names = "fe", "pdma", "qdma", + "xsi-mac", "hsi0-mac", "hsi1-mac", + "hsi-mac", "xfp-mac"; + + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + gdm1: ethernet@1 { + compatible = "airoha,eth-mac"; + reg = <1>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <10000>; + full-duplex; + pause; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 773cc02a13d0..780aeba0f3a4 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-orangepi-4a.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index bd366389b238..bb5f9e4f3d42 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -236,6 +236,21 @@ bias-pull-up; }; + rgmii0_pins: rgmii0-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH9", "PH10", + "PH14", "PH15", "PH16", "PH17", "PH18"; + function = "emac0"; + drive-strength = <40>; + }; + + rmii0_pins: rmii0-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH9", "PH10"; + function = "emac0"; + drive-strength = <40>; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; function = "uart0"; @@ -405,6 +420,26 @@ #size-cells = <0>; }; + emac0: ethernet@5020000 { + compatible = "allwinner,sun50i-a100-emac", + "allwinner,sun50i-a64-emac"; + reg = <0x5020000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + syscon = <&syscon>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + ths: thermal-sensor@5070400 { compatible = "allwinner,sun50i-a100-ths"; reg = <0x05070400 0x100>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts index fe77178d3e33..90a50910f07b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts @@ -65,6 +65,25 @@ status = "okay"; }; +&emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&rmii0_pins>; + phy-handle = <&rmii_phy>; + phy-mode = "rmii"; + status = "okay"; +}; + +&mdio0 { + reset-gpios = <&pio 7 12 GPIO_ACTIVE_LOW>; /* PH12 */ + reset-delay-us = <2000>; + reset-post-delay-us = <2000>; + + rmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi index 8b7cbc2e78f5..6b6f2296bdff 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi @@ -7,6 +7,8 @@ #include <dt-bindings/clock/sun55i-a523-r-ccu.h> #include <dt-bindings/reset/sun55i-a523-ccu.h> #include <dt-bindings/reset/sun55i-a523-r-ccu.h> +#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h> +#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h> / { interrupt-parent = <&gic>; @@ -106,6 +108,21 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + gpu: gpu@1800000 { + compatible = "allwinner,sun55i-a523-mali", + "arm,mali-valhall-jm"; + reg = <0x1800000 0x10000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + power-domains = <&pck600 PD_GPU>; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + pio: pinctrl@2000000 { compatible = "allwinner,sun55i-a523-pinctrl"; reg = <0x2000000 0x800>; @@ -126,16 +143,6 @@ interrupt-controller; #interrupt-cells = <3>; - rgmii0_pins: rgmii0-pins { - pins = "PH0", "PH1", "PH2", "PH3", "PH4", - "PH5", "PH6", "PH7", "PH9", "PH10", - "PH14", "PH15", "PH16", "PH17", "PH18"; - allwinner,pinmux = <5>; - function = "emac0"; - drive-strength = <40>; - bias-disable; - }; - mmc0_pins: mmc0-pins { pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5"; allwinner,pinmux = <2>; @@ -163,11 +170,35 @@ bias-pull-up; }; + rgmii0_pins: rgmii0-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH9", "PH10", + "PH14", "PH15", "PH16", "PH17", "PH18"; + allwinner,pinmux = <5>; + function = "gmac0"; + drive-strength = <40>; + bias-disable; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; allwinner,pinmux = <2>; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + allwinner,pinmux = <2>; + }; + + /omit-if-no-ref/ + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + allwinner,pinmux = <2>; + }; }; ccu: clock-controller@2001000 { @@ -181,69 +212,6 @@ #reset-cells = <1>; }; - mmc0: mmc@4020000 { - compatible = "allwinner,sun55i-a523-mmc", - "allwinner,sun20i-d1-mmc"; - reg = <0x04020000 0x1000>; - clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC0>; - reset-names = "ahb"; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - status = "disabled"; - - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@4021000 { - compatible = "allwinner,sun55i-a523-mmc", - "allwinner,sun20i-d1-mmc"; - reg = <0x04021000 0x1000>; - clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC1>; - reset-names = "ahb"; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - status = "disabled"; - - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@4022000 { - compatible = "allwinner,sun55i-a523-mmc", - "allwinner,sun20i-d1-mmc"; - reg = <0x04022000 0x1000>; - clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC2>; - reset-names = "ahb"; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - status = "disabled"; - - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - wdt: watchdog@2050000 { compatible = "allwinner,sun55i-a523-wdt"; reg = <0x2050000 0x20>; @@ -428,6 +396,14 @@ ranges; }; + sid: efuse@3006000 { + compatible = "allwinner,sun55i-a523-sid", + "allwinner,sun50i-a64-sid"; + reg = <0x03006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + gic: interrupt-controller@3400000 { compatible = "arm,gic-v3"; #address-cells = <1>; @@ -449,6 +425,69 @@ }; }; + mmc0: mmc@4020000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + usb_otg: usb@4100000 { compatible = "allwinner,sun55i-a523-musb", "allwinner,sun8i-a33-musb"; @@ -540,8 +579,8 @@ status = "disabled"; }; - emac0: ethernet@4500000 { - compatible = "allwinner,sun55i-a523-emac0", + gmac0: ethernet@4500000 { + compatible = "allwinner,sun55i-a523-gmac0", "allwinner,sun50i-a64-emac"; reg = <0x04500000 0x10000>; clocks = <&ccu CLK_BUS_EMAC0>; @@ -562,6 +601,14 @@ }; }; + ppu: power-controller@7001400 { + compatible = "allwinner,sun55i-a523-ppu"; + reg = <0x07001400 0x400>; + clocks = <&r_ccu CLK_BUS_R_PPU1>; + resets = <&r_ccu RST_BUS_R_PPU1>; + #power-domain-cells = <1>; + }; + r_ccu: clock-controller@7010000 { compatible = "allwinner,sun55i-a523-r-ccu"; reg = <0x7010000 0x250>; @@ -608,6 +655,14 @@ }; }; + pck600: power-controller@7060000 { + compatible = "allwinner,sun55i-a523-pck-600"; + reg = <0x07060000 0x8000>; + clocks = <&r_ccu CLK_BUS_R_PPU0>; + resets = <&r_ccu RST_BUS_R_PPU0>; + #power-domain-cells = <1>; + }; + r_i2c0: i2c@7081400 { compatible = "allwinner,sun55i-a523-i2c", "allwinner,sun8i-v536-i2c", diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts index 0f58d92a6adc..553ad774ed13 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts @@ -12,7 +12,7 @@ compatible = "radxa,cubie-a5e", "allwinner,sun55i-a527"; aliases { - ethernet0 = &emac0; + ethernet0 = &gmac0; serial0 = &uart0; }; @@ -55,7 +55,7 @@ status = "okay"; }; -&emac0 { +&gmac0 { phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_cldo3>; @@ -66,6 +66,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + &mdio0 { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts index 59db103546f6..a96927fbdadd 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts @@ -54,6 +54,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts index 08127f0cdd35..b9eeb6753e9e 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts @@ -12,7 +12,7 @@ compatible = "yuzukihd,avaota-a1", "allwinner,sun55i-t527"; aliases { - ethernet0 = &emac0; + ethernet0 = &gmac0; serial0 = &uart0; }; @@ -65,7 +65,7 @@ status = "okay"; }; -&emac0 { +&gmac0 { phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dcdc4>; @@ -76,6 +76,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + &mdio0 { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts new file mode 100644 index 000000000000..d07bb9193b43 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org> + */ + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "OrangePi 4A"; + compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + leds { + compatible = "gpio-leds"; + + /* PWM capable pin, but PWM isn't supported yet. */ + led { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ + }; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */ + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_vcc5v>; + gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + enable-active-high; + }; + + reg_pcie_vcc3v3: regulator-pcie-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-pcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_vcc5v>; + gpio = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ + enable-active-high; + }; + + reg_vcc5v: regulator-vcc5v { + /* board wide 5V supply from USB type-C port */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_cldo3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + vmmc-supply = <®_dldo1_323>; + vqmmc-supply = <®_bldo1>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + bus-width = <8>; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <®_cldo3>; + vqmmc-supply = <®_cldo1>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_cldo3>; /* via VCC-IO */ + vcc-pc-supply = <®_cldo1>; + vcc-pd-supply = <®_cldo3>; + vcc-pe-supply = <®_aldo2>; + vcc-pf-supply = <®_cldo3>; /* VCC-IO for 3.3v; VCC-MCSI for 1.8v */ + vcc-pg-supply = <®_bldo1>; + vcc-ph-supply = <®_cldo3>; /* via VCC-IO */ + vcc-pi-supply = <®_cldo3>; + vcc-pj-supply = <®_cldo1>; + vcc-pk-supply = <®_cldo1>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@35 { + compatible = "x-powers,axp717"; + reg = <0x35>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts-extended = <&nmi_intc 0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + vin4-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + /* Supplies the "little" cluster (1.4 GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1160000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vcc-dram"; + }; + + reg_dcdc4: dcdc4 { + /* feeds 3.3V pin on GPIO header */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vdd-io"; + }; + + aldo1 { + /* not actually connected */ + regulator-name = "avdd-csi"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_aldo3: aldo3 { + /* supplies the I2C pins for this PMIC */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-usb"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg-wifi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-lpddr"; + }; + + bldo3 { + /* not actually connected */ + regulator-name = "afvcc-csi"; + }; + + bldo4 { + /* not actually connected */ + regulator-name = "dvdd-csi"; + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-cvp-pc-lvds-mcsi-pk-efuse-pcie-edp-1v8"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-csi"; + }; + + reg_cldo3: cldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-mmc-nand-pd-pi-usb"; + }; + + reg_cldo4: cldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-phy1-lcd"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus-usb-0v9"; + }; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + status = "okay"; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + reg_aldo1_323: aldo1 { + /* less capable and shares load with dldo1 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo1_323: dldo1 { + /* more capable and shares load with aldo1 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi2"; + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1150000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + /* Some RISC-V management core related voltage */ + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-dnr"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <®_aldo3>; + */ + vcc-pm-supply = <®_bldo2>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "lpo"; + vbat-supply = <®_aldo1_323>; + vddio-supply = <®_bldo1>; + device-wakeup-gpios = <&r_pio 1 3 GPIO_ACTIVE_HIGH>; /* PM3 */ + host-wakeup-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + shutdown-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + }; +}; + +&usb_otg { + /* + * The OTG controller is connected to one of the type-A ports. + * There is a regulator, controlled by a GPIO, to provide VBUS power + * to the port, and a VBUSDET GPIO, to detect externally provided + * power. But without ID or CC pins there is no real way to do a + * runtime role detection. + */ + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_otg_vbus>; + usb0_vbus_det-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + usb1_vbus-supply = <®_usb_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 0def0b0daaf7..effd242f6bf7 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -130,16 +130,19 @@ cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <150000000>; }; cb_intosc_ls_clk: cb-intosc-ls-clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <300000000>; }; f2s_free_clk: f2s-free-clk { #clock-cells = <0>; compatible = "fixed-clock"; + status = "disabled"; }; osc1: osc1 { @@ -395,7 +398,7 @@ rst: rstmgr@ffd11000 { #reset-cells = <1>; - compatible = "altr,stratix10-rst-mgr"; + compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr"; reg = <0xffd11000 0x1000>; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts index 34ccf8138f7b..ad52e8a0b9ba 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts @@ -68,7 +68,6 @@ &gmac1 { status = "okay"; phy-mode = "rgmii"; - phy-addr = <0xffffffff>; }; &gmac2 { @@ -103,12 +102,7 @@ status = "okay"; }; -&rst { - altr,modrst-offset = <0x20>; -}; - &sysmgr { reg = <0xffd12000 0x1000>; interrupts = <0x0 0x10 0x4>; - cpu1-start-addr = <0xffd06230>; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 15e7901c1268..619dce79b020 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi index a8c90245c42a..5f602f1170c0 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/amlogic,pinctrl.h> / { cpus { #address-cells = <2>; @@ -92,6 +93,102 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-s6"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>; + + gpioz: gpio@c0 { + reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>; + }; + + gpiox: gpio@100 { + reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpioh: gpio@140 { + reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 9>; + }; + + gpiod: gpio@180 { + reg = <0 0x180 0 0x20>, <0 0x8 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 7>; + }; + + gpiof: gpio@1a0 { + reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_F<<8) 5>; + }; + + gpioe: gpio@1c0 { + reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 3>; + }; + + gpioc: gpio@200 { + reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>; + }; + + gpiob: gpio@240 { + reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + gpioa: gpio@280 { + reg = <0 0x280 0 0x20>, <0 0x40 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 16>; + }; + + test_n: gpio@2c0 { + reg = <0 0x2c0 0 0x20>; + reg-names = "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = + <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + + gpiocc: gpio@300 { + reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi index f0c172681bd1..260918b37b9a 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/amlogic,pinctrl.h> / { cpus { @@ -94,6 +95,86 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-s7"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>; + + gpioz: gpio@c0 { + reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>; + }; + + gpiox: gpio@100 { + reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpioh: gpio@140 { + reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>; + }; + + gpiod: gpio@180 { + reg = <0 0x180 0 0x20>, <0 0x40 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 12>; + }; + + gpioe: gpio@1c0 { + reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>; + }; + + gpioc: gpio@200 { + reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>; + }; + + gpiob: gpio@240 { + reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + test_n: gpio@2c0 { + reg = <0 0x2c0 0 0x20>; + reg-names = "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = + <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + + gpiocc: gpio@300 { + reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi index e1099bc1535d..c4d260d5bb58 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/amlogic,pinctrl.h> / { cpus { @@ -94,6 +95,95 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-s7d", + "amlogic,pinctrl-s7"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>; + + gpioz: gpio@c0 { + reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>; + }; + + gpiox: gpio@100 { + reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpioh: gpio@140 { + reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>; + }; + + gpiod: gpio@180 { + reg = <0 0x180 0 0x20>, <0 0x40 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 5>; + }; + + gpioe: gpio@1c0 { + reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>; + }; + + gpioc: gpio@200 { + reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>; + }; + + gpiob: gpio@240 { + reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + gpiodv: gpio@280 { + reg = <0 0x280 0 0x20>, <0 0x8 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_DV<<8) 7>; + }; + + test_n: gpio@2c0 { + reg = <0 0x2c0 0 0x20>; + reg-names = "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = + <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + + gpiocc: gpio@300 { + reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts index 124a80901084..9fd68195be3f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts @@ -39,3 +39,7 @@ phy-names = "usb2-phy0", "usb2-phy1"; }; */ + +&npu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts index 415248931ab1..82546b738977 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts @@ -111,3 +111,7 @@ &pwm_ab { pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>; }; + +&npu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 6da1316d97c6..b4f88ed6273b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -97,7 +97,7 @@ clock-names = "ext_clock"; }; - cvbs-connector { + cvbs_connector: cvbs-connector { compatible = "composite-video-connector"; port { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index ecaf678b23dd..9d5a481b309f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -217,7 +217,7 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - brcmf: brcmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts new file mode 100644 index 000000000000..ba871f3f53bb --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net> + * + * Debug UART (3.3V, 115200 baud) at the corner of the board: + * (4) (3) (2) [1] + * Vcc RXD TXD GND + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h> + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "ugoos,am3", "amlogic,s912", "amlogic,meson-gxm"; + model = "Ugoos AM3"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; +}; + +&cvbs_connector { + /* Not used on this board */ + status = "disabled"; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; + + status = "okay"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c_B { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_b_pins>; + + rtc: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +/* WLAN: Atheros 10k (QCA9377) */ +&sd_emmc_a { + max-frequency = <200000000>; +}; + +/* eMMC */ +&sd_emmc_c { + max-frequency = <100000000>; +}; diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi index 89c3b211b116..0ad77c98073f 100644 --- a/arch/arm64/boot/dts/apple/t6000.dtsi +++ b/arch/arm64/boot/dts/apple/t6000.dtsi @@ -16,3 +16,7 @@ }; /delete-node/ &pmgr_south; + +&gpu { + compatible = "apple,agx-g13s"; +}; diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi index d2cf81926f28..ffbe823b71bc 100644 --- a/arch/arm64/boot/dts/apple/t6001.dtsi +++ b/arch/arm64/boot/dts/apple/t6001.dtsi @@ -62,3 +62,7 @@ }; }; }; + +&gpu { + compatible = "apple,agx-g13c", "apple,agx-g13s"; +}; diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi index e36f422d257d..8fb648836b53 100644 --- a/arch/arm64/boot/dts/apple/t6002.dtsi +++ b/arch/arm64/boot/dts/apple/t6002.dtsi @@ -300,3 +300,7 @@ // On t6002, the die0 GPU power domain needs both AFR power domains power-domains = <&ps_afr>, <&ps_afr_die1>; }; + +&gpu { + compatible = "apple,agx-g13d", "apple,agx-g13s"; +}; diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi index 87dfc13d7417..e20234ef2135 100644 --- a/arch/arm64/boot/dts/apple/t600x-common.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi @@ -11,6 +11,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + gpu = &gpu; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -378,4 +382,34 @@ #clock-cells = <0>; clock-output-names = "nco_ref"; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpu_globals: globals { + status = "disabled"; + }; + + gpu_hw_cal_a: hw-cal-a { + status = "disabled"; + }; + + gpu_hw_cal_b: hw-cal-b { + status = "disabled"; + }; + + uat_handoff: uat-handoff { + status = "disabled"; + }; + + uat_pagetables: uat-pagetables { + status = "disabled"; + }; + + uat_ttbs: uat-ttbs { + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi index 110bc6719512..1563b3ce1ff6 100644 --- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi @@ -72,12 +72,12 @@ reg = <0x6001 0x1>; }; - boot_error_count: boot-error-count@6002 { + boot_error_count: boot-error-count@6002,0 { reg = <0x6002 0x1>; bits = <0 4>; }; - panic_count: panic-count@6002 { + panic_count: panic-count@6002,4 { reg = <0x6002 0x1>; bits = <4 4>; }; @@ -86,7 +86,7 @@ reg = <0x6003 0x1>; }; - shutdown_flag: shutdown-flag@600f { + shutdown_flag: shutdown-flag@600f,3 { reg = <0x600f 0x1>; bits = <3 1>; }; @@ -302,6 +302,34 @@ #sound-dai-cells = <1>; }; + gpu: gpu@406400000 { + compatible = "apple,agx-g13s"; + reg = <0x4 0x6400000 0 0x40000>, + <0x4 0x4000000 0 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; + + agx_mbox: mbox@406408000 { + compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x4 0x6408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 0 1059 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 0 1060 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 0 1061 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 0 1062 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + pcie0_dart_0: iommu@581008000 { compatible = "apple,t6000-dart"; reg = <0x5 0x81008000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/apple/t8012-j132.dts b/arch/arm64/boot/dts/apple/t8012-j132.dts index 778a69be18dd..7dcac51703ff 100644 --- a/arch/arm64/boot/dts/apple/t8012-j132.dts +++ b/arch/arm64/boot/dts/apple/t8012-j132.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "t8012-jxxx.dtsi" +#include "t8012-touchbar.dtsi" / { model = "Apple T2 MacBookPro15,2 (j132)"; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index 3a204845b85b..589ddc039799 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -19,6 +19,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + gpu = &gpu; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -351,6 +355,36 @@ clock-output-names = "nco_ref"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpu_globals: globals { + status = "disabled"; + }; + + gpu_hw_cal_a: hw-cal-a { + status = "disabled"; + }; + + gpu_hw_cal_b: hw-cal-b { + status = "disabled"; + }; + + uat_handoff: uat-handoff { + status = "disabled"; + }; + + uat_pagetables: uat-pagetables { + status = "disabled"; + }; + + uat_ttbs: uat-ttbs { + status = "disabled"; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -359,6 +393,34 @@ ranges; nonposted-mmio; + gpu: gpu@206400000 { + compatible = "apple,agx-g13g"; + reg = <0x2 0x6400000 0 0x40000>, + <0x2 0x4000000 0 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; + + agx_mbox: mbox@206408000 { + compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x2 0x6408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 575 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 576 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 577 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 578 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + cpufreq_e: performance-controller@210e20000 { compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq"; reg = <0x2 0x10e20000 0 0x1000>; @@ -759,12 +821,12 @@ reg = <0x9f01 0x1>; }; - boot_error_count: boot-error-count@9f02 { + boot_error_count: boot-error-count@9f02,0 { reg = <0x9f02 0x1>; bits = <0 4>; }; - panic_count: panic-count@9f02 { + panic_count: panic-count@9f02,4 { reg = <0x9f02 0x1>; bits = <4 4>; }; @@ -773,7 +835,7 @@ reg = <0x9f03 0x1>; }; - shutdown_flag: shutdown-flag@9f0f { + shutdown_flag: shutdown-flag@9f0f,3 { reg = <0x9f0f 0x1>; bits = <3 1>; }; diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi index f68354194355..b36b345861b6 100644 --- a/arch/arm64/boot/dts/apple/t8112.dtsi +++ b/arch/arm64/boot/dts/apple/t8112.dtsi @@ -19,6 +19,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + gpu = &gpu; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -366,6 +370,36 @@ clock-output-names = "nco_ref"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpu_globals: globals { + status = "disabled"; + }; + + gpu_hw_cal_a: hw-cal-a { + status = "disabled"; + }; + + gpu_hw_cal_b: hw-cal-b { + status = "disabled"; + }; + + uat_handoff: uat-handoff { + status = "disabled"; + }; + + uat_pagetables: uat-pagetables { + status = "disabled"; + }; + + uat_ttbs: uat-ttbs { + status = "disabled"; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -374,6 +408,34 @@ ranges; nonposted-mmio; + gpu: gpu@206400000 { + compatible = "apple,agx-g14g"; + reg = <0x2 0x6400000 0 0x40000>, + <0x2 0x4000000 0 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; + + agx_mbox: mbox@206408000 { + compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x2 0x6408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 709 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 710 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 711 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 712 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + cpufreq_e: cpufreq@210e20000 { compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq"; reg = <0x2 0x10e20000 0 0x1000>; @@ -807,12 +869,12 @@ reg = <0xf701 0x1>; }; - boot_error_count: boot-error-count@f702 { + boot_error_count: boot-error-count@f702,0 { reg = <0xf702 0x1>; bits = <0 4>; }; - panic_count: panic-count@f702 { + panic_count: panic-count@f702,4 { reg = <0xf702 0x1>; bits = <4 4>; }; @@ -821,7 +883,7 @@ reg = <0xf703 0x1>; }; - shutdown_flag: shutdown-flag@f70f { + shutdown_flag: shutdown-flag@f70f,3 { reg = <0xf70f 0x1>; bits = <3 1>; }; diff --git a/arch/arm64/boot/dts/axiado/Makefile b/arch/arm64/boot/dts/axiado/Makefile new file mode 100644 index 000000000000..6676ad07db61 --- /dev/null +++ b/arch/arm64/boot/dts/axiado/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_AXIADO) += ax3000-evk.dtb diff --git a/arch/arm64/boot/dts/axiado/ax3000-evk.dts b/arch/arm64/boot/dts/axiado/ax3000-evk.dts new file mode 100644 index 000000000000..92101c5b534b --- /dev/null +++ b/arch/arm64/boot/dts/axiado/ax3000-evk.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved. + */ + +/dts-v1/; + +#include "ax3000.dtsi" + +/ { + model = "Axiado AX3000 EVK"; + compatible = "axiado,ax3000-evk", "axiado,ax3000"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200"; + }; + + memory@0 { + device_type = "memory"; + /* Cortex-A53 will use following memory map */ + reg = <0x00000000 0x3d000000 0x00000000 0x23000000>, + <0x00000004 0x00000000 0x00000000 0x80000000>; + }; +}; + +/* GPIO bank 0 - 7 */ +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&gpio6 { + status = "okay"; +}; + +&gpio7 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/axiado/ax3000.dtsi b/arch/arm64/boot/dts/axiado/ax3000.dtsi new file mode 100644 index 000000000000..792f52e0c7dd --- /dev/null +++ b/arch/arm64/boot/dts/axiado/ax3000.dtsi @@ -0,0 +1,520 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x3c0013a0 0x00000008; /* cpu-release-addr */ +/ { + model = "Axiado AX3000"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x3c0013a0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x3c0013a0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x3c0013a0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x3c0013a0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x100000>; + cache-unified; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + }; + + clocks { + clk_xin: clock-200000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "clk_xin"; + }; + + refclk: clock-125000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic500>; + + gic500: interrupt-controller@80300000 { + compatible = "arm,gic-v3"; + reg = <0x00 0x80300000 0x00 0x10000>, + <0x00 0x80380000 0x00 0x80000>; + ranges; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + #redistributor-regions = <1>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* GPIO Controller banks 0 - 7 */ + gpio0: gpio-controller@80500000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80500000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio-controller@80580000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80580000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio-controller@80600000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80600000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio3: gpio-controller@80680000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80680000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio4: gpio-controller@80700000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80700000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio5: gpio-controller@80780000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80780000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio6: gpio-controller@80800000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80800000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio7: gpio-controller@80880000 { + compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02"; + reg = <0x00 0x80880000 0x00 0x400>; + clocks = <&refclk>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + /* I3C Controller 0 - 16 */ + i3c0: i3c@80500400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80500400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c1: i3c@80500800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80500800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c2: i3c@80580400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80580400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c3: i3c@80580800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80580800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c4: i3c@80600400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80600400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c5: i3c@80600800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80600800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c6: i3c@80680400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80680400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c7: i3c@80680800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80680800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c8: i3c@80700400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80700400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c9: i3c@80700800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80700800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c10: i3c@80780400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80780400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c11: i3c@80780800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80780800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c12: i3c@80800400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80800400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c13: i3c@80800800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80800800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c14: i3c@80880400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80880400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c15: i3c@80880800 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80880800 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + i3c16: i3c@80620400 { + compatible = "axiado,ax3000-i3c", "cdns,i3c-master"; + reg = <0x00 0x80620400 0x00 0x400>; + clocks = <&refclk &clk_xin>; + clock-names = "pclk", "sysclk"; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + i2c-scl-hz = <100000>; + i3c-scl-hz = <400000>; + #address-cells = <3>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@80520000 { + compatible = "axiado,ax3000-uart", "cdns,uart-r1p12"; + reg = <0x00 0x80520000 0x00 0x100>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "uart_clk", "pclk"; + clocks = <&refclk &refclk>; + status = "disabled"; + }; + + uart1: serial@805a0000 { + compatible = "axiado,ax3000-uart", "cdns,uart-r1p12"; + reg = <0x00 0x805A0000 0x00 0x100>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "uart_clk", "pclk"; + clocks = <&refclk &refclk>; + status = "disabled"; + }; + + uart2: serial@80620000 { + compatible = "axiado,ax3000-uart", "cdns,uart-r1p12"; + reg = <0x00 0x80620000 0x00 0x100>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "uart_clk", "pclk"; + clocks = <&refclk &refclk>; + status = "disabled"; + }; + + uart3: serial@80520800 { + compatible = "axiado,ax3000-uart", "cdns,uart-r1p12"; + reg = <0x00 0x80520800 0x00 0x100>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "uart_clk", "pclk"; + clocks = <&refclk &refclk>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic500>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 01ecfa304184..83d45afc6588 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -7,13 +7,15 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ bcm2712-rpi-5-b.dtb \ + bcm2712-rpi-5-b-ovl-rp1.dtb \ bcm2712-d-rpi-5-b.dtb \ bcm2837-rpi-2-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ - bcm2837-rpi-zero-2-w.dtb + bcm2837-rpi-zero-2-w.dtb \ + rp1.dtbo subdir-y += bcmbca subdir-y += northstar2 diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts new file mode 100644 index 000000000000..6ea3c102e0d6 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "bcm2712.dtsi" + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5"; + + aliases { + serial10 = &uart10; + }; + + chosen: chosen { + stdout-path = "serial10:115200n8"; + }; + + clk_rp1_xosc: clock-50000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "rp1-xosc"; + clock-frequency = <50000000>; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0 0x28000000>; + }; + + sd_io_1v8_reg: sd-io-1v8-reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 1>, + <3300000 0>; + }; + + sd_vcc_reg: sd-vcc-reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector + * labeled "UART", i.e. the interface with the system console. + */ +&uart10 { + status = "okay"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; +}; + +&soc { + firmware: firmware { + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + + mboxes = <&mailbox>; + dma-ranges; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; + }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; +}; + +&hvs { + clocks = <&firmware_clocks 4>, <&firmware_clocks 16>; + clock-names = "core", "disp"; +}; + +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index 34470e3d7171..a70a9b158df3 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -1,108 +1,19 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include "bcm2712.dtsi" - -/ { - compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; - model = "Raspberry Pi 5"; - - aliases { - serial10 = &uart10; - }; - - chosen: chosen { - stdout-path = "serial10:115200n8"; - }; - - /* Will be filled by the bootloader */ - memory@0 { - device_type = "memory"; - reg = <0 0 0 0x28000000>; - }; - - sd_io_1v8_reg: sd-io-1v8-reg { - compatible = "regulator-gpio"; - regulator-name = "vdd-sd-io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-settling-time-us = <5000>; - gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; - states = <1800000 1>, - <3300000 0>; - }; - - sd_vcc_reg: sd-vcc-reg { - compatible = "regulator-fixed"; - regulator-name = "vcc-sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; - }; -}; - -/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector - * labeled "UART", i.e. the interface with the system console. +/* + * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make + * the RP1 driver to load the RP1 dtb overlay at runtime, while + * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it + * already contains RP1 node, so no overlay is loaded nor needed). + * This file is not intended to be modified, nodes should be added + * to the included bcm2712-rpi-5-b-ovl-rp1.dts. */ -&uart10 { - status = "okay"; -}; -/* SDIO1 is used to drive the SD card */ -&sdio1 { - vqmmc-supply = <&sd_io_1v8_reg>; - vmmc-supply = <&sd_vcc_reg>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-ddr50; - sd-uhs-sdr104; -}; - -&soc { - firmware: firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - - mboxes = <&mailbox>; - dma-ranges; - - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; - }; - - reset: reset { - compatible = "raspberrypi,firmware-reset"; - #reset-cells = <1>; - }; - }; - - power: power { - compatible = "raspberrypi,bcm2835-power"; - firmware = <&firmware>; - #power-domain-cells = <1>; - }; -}; - -&hvs { - clocks = <&firmware_clocks 4>, <&firmware_clocks 16>; - clock-names = "core", "disp"; -}; +/dts-v1/; -&hdmi0 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; -}; +#include "bcm2712-rpi-5-b-ovl-rp1.dts" -&hdmi1 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; +&pcie2 { + #include "rp1-nexus.dtsi" }; &pcie1 { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi index 613ba7ee43d6..3b7595fd4e81 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -323,11 +323,12 @@ }; }; + /* PERF Peripherals */ bus@ff800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00 0x00 0xff800000 0x3000>; + ranges = <0x00 0x00 0xff800000 0x400000>; twd: timer-mfd@400 { compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; @@ -348,13 +349,103 @@ }; }; - gpio0: gpio-controller@500 { + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x528 0x04>; reg-names = "dirout", "dat"; - reg = <0x500 0x28>, <0x528 0x28>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x540 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x544 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 256 .. 287 */ + gpio8: gpio@520 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x520 0x04>, <0x548 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 288 .. 319 */ + gpio9: gpio@524 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x524 0x04>, <0x54c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; }; pinctrl@560 { @@ -584,6 +675,12 @@ #size-cells = <0>; }; + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -636,6 +733,19 @@ #reset-cells = <1>; }; }; + + pl081_dma: dma-controller@59000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x59000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; }; reboot { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi index 48d618e75866..a441388c0cd2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2022 Broadcom Ltd. + * This DTSI is for the B0 and later revision of the SoC */ #include <dt-bindings/interrupt-controller/irq.h> @@ -125,6 +126,101 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + + leds: led-controller@800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -151,6 +247,21 @@ }; }; + /* B0 AHB Peripherals */ + pl081_dma: dma-controller@11000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x11000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; + + /* B0 ARM UART Peripheral block */ uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; @@ -159,5 +270,23 @@ clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; + + uart1: serial@13000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x13000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@14000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x14000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi index 00c62c1e5df0..dcbd0fdd33d2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -93,11 +93,103 @@ }; }; + /* PERF Peripherals */ bus@ff800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; + ranges = <0x0 0x0 0xff800000 0x400000>; + + watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x10>; + }; + + watchdog@4c0 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x4c0 0x10>; + status = "disabled"; + }; + + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; uart0: serial@640 { compatible = "brcm,bcm6345-uart"; @@ -108,6 +200,29 @@ status = "disabled"; }; + uart1: serial@660 { + compatible = "brcm,bcm6345-uart"; + reg = <0x660 0x18>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + + leds: led-controller@800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -133,5 +248,18 @@ reg = <0>; }; }; + + pl081_dma: dma-controller@59000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x59000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi index caeaf428dc15..c105a734a648 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -111,11 +111,12 @@ }; }; + /* PERF Peripherals */ bus@ff800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x62000>; + ranges = <0x0 0x0 0xff800000 0x400000>; twd: timer-mfd@400 { compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; @@ -136,6 +137,86 @@ }; }; + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + uart0: serial@640 { compatible = "brcm,bcm6345-uart"; reg = <0x640 0x18>; @@ -145,6 +226,29 @@ status = "disabled"; }; + uart1: serial@660 { + compatible = "brcm,bcm6345-uart"; + reg = <0x660 0x18>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + + leds: led-controller@800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -170,5 +274,18 @@ reg = <0>; }; }; + + pl081_dma: dma-controller@59000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x59000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 5a4b81faff20..9888a1fabd5c 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -367,7 +367,6 @@ v2m0: v2m@0 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x00000 0x1000>; arm,msi-base-spi = <72>; @@ -376,7 +375,6 @@ v2m1: v2m@10000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x10000 0x1000>; arm,msi-base-spi = <88>; @@ -385,7 +383,6 @@ v2m2: v2m@20000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x20000 0x1000>; arm,msi-base-spi = <104>; @@ -394,7 +391,6 @@ v2m3: v2m@30000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x30000 0x1000>; arm,msi-base-spi = <120>; @@ -403,7 +399,6 @@ v2m4: v2m@40000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x40000 0x1000>; arm,msi-base-spi = <136>; @@ -412,7 +407,6 @@ v2m5: v2m@50000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x50000 0x1000>; arm,msi-base-spi = <152>; @@ -421,7 +415,6 @@ v2m6: v2m@60000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x60000 0x1000>; arm,msi-base-spi = <168>; @@ -430,7 +423,6 @@ v2m7: v2m@70000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x70000 0x1000>; arm,msi-base-spi = <184>; diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi new file mode 100644 index 000000000000..5002a375eb0b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/raspberrypi,rp1-clocks.h> + +pci_ep_bus: pci-ep-bus@1 { + compatible = "simple-bus"; + ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; + dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@40018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0x00 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>, + <&rp1_clocks RP1_PLL_SYS>, + <&rp1_clocks RP1_PLL_SYS_SEC>, + <&rp1_clocks RP1_CLK_SYS>; + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE + <200000000>, // RP1_PLL_SYS + <125000000>, // RP1_PLL_SYS_SEC + <200000000>; // RP1_CLK_SYS + }; + + rp1_gpio: pinctrl@400d0000 { + compatible = "raspberrypi,rp1-gpio"; + reg = <0x00 0x400d0000 0x0 0xc000>, + <0x00 0x400e0000 0x0 0xc000>, + <0x00 0x400f0000 0x0 0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi new file mode 100644 index 000000000000..0ef30d7f1c35 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +rp1_nexus { + compatible = "pci1de4,1"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01 0x00 0x00000000 + 0x02000000 0x00 0x00000000 + 0x0 0x400000>; + interrupt-controller; + #interrupt-cells = <2>; + + #include "rp1-common.dtsi" +}; diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso new file mode 100644 index 000000000000..ab4f146d22c0 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/rp1.dtso @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +/plugin/; + +&pcie2 { + #address-cells = <3>; + #size-cells = <2>; + + #include "rp1-nexus.dtsi" +}; diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index 6dfe78a7d4ab..966fb57280f3 100644 --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -136,8 +136,8 @@ reg = <0x04 0x02020000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk125mhz>; - clock-names = "apb_pclk"; + clocks = <&clk125mhz>, <&clk125mhz>; + clock-names = "uartclk", "apb_pclk"; }; }; diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile new file mode 100644 index 000000000000..ed3713982012 --- /dev/null +++ b/arch/arm64/boot/dts/cix/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts new file mode 100644 index 000000000000..d74964d53c3b --- /dev/null +++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright 2025 Cix Technology Group Co., Ltd. + * + */ + +/dts-v1/; + +#include "sky1.dtsi" +/ { + model = "Radxa Orion O6"; + compatible = "radxa,orion-o6", "cix,sky1"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = &uart2; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x28000000>; + linux,cma-default; + }; + }; + +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi new file mode 100644 index 000000000000..7dfe7677e649 --- /dev/null +++ b/arch/arm64/boot/dts/cix/sky1.dtsi @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright 2025 Cix Technology Group Co., Ltd. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/cix,sky1.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a520"; + enable-method = "psci"; + reg = <0x0 0x0>; + device_type = "cpu"; + capacity-dmips-mhz = <403>; + }; + + cpu1: cpu@100 { + compatible = "arm,cortex-a520"; + enable-method = "psci"; + reg = <0x0 0x100>; + device_type = "cpu"; + capacity-dmips-mhz = <403>; + }; + + cpu2: cpu@200 { + compatible = "arm,cortex-a520"; + enable-method = "psci"; + reg = <0x0 0x200>; + device_type = "cpu"; + capacity-dmips-mhz = <403>; + }; + + cpu3: cpu@300 { + compatible = "arm,cortex-a520"; + enable-method = "psci"; + reg = <0x0 0x300>; + device_type = "cpu"; + capacity-dmips-mhz = <403>; + }; + + cpu4: cpu@400 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0x400>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu5: cpu@500 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0x500>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu6: cpu@600 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0x600>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu7: cpu@700 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0x700>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu8: cpu@800 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0x800>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu9: cpu@900 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0x900>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu10: cpu@a00 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0xa00>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu11: cpu@b00 { + compatible = "arm,cortex-a720"; + enable-method = "psci"; + reg = <0x0 0xb00>; + device_type = "cpu"; + capacity-dmips-mhz = <1024>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + core4 { + cpu = <&cpu4>; + }; + core5 { + cpu = <&cpu5>; + }; + core6 { + cpu = <&cpu6>; + }; + core7 { + cpu = <&cpu7>; + }; + core8 { + cpu = <&cpu8>; + }; + core9 { + cpu = <&cpu9>; + }; + core10 { + cpu = <&cpu10>; + }; + core11 { + cpu = <&cpu11>; + }; + }; + }; + }; + + firmware { + ap_to_pm_scmi: scmi { + compatible = "arm,scmi"; + mbox-names = "tx", "rx"; + mboxes = <&mbox_ap2pm 8>, <&mbox_pm2ap 8>; + shmem = <&ap2pm_scmi_mem>, <&pm2ap_scmi_mem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + + pmu-a520 { + compatible = "arm,cortex-a520-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>; + }; + + pmu-a720 { + compatible = "arm,cortex-a720-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0 0x20 0>; + dma-ranges; + #address-cells = <2>; + #size-cells = <2>; + + uart0: serial@40b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x040b0000 0x0 0x1000>; + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&scmi_clk CLK_TREE_FCH_UART0_FUNC>, <&scmi_clk CLK_TREE_FCH_UART0_APB>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart1: serial@40c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x040c0000 0x0 0x1000>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&scmi_clk CLK_TREE_FCH_UART1_FUNC>, <&scmi_clk CLK_TREE_FCH_UART1_APB>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@40d0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x040d0000 0x0 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&scmi_clk CLK_TREE_FCH_UART2_FUNC>, <&scmi_clk CLK_TREE_FCH_UART2_APB>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart3: serial@40e0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x040e0000 0x0 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&scmi_clk CLK_TREE_FCH_UART3_FUNC>, <&scmi_clk CLK_TREE_FCH_UART3_APB>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + mbox_ap2se: mailbox@5060000 { + compatible = "cix,sky1-mbox"; + reg = <0x0 0x05060000 0x0 0x10000>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "tx"; + }; + + mbox_se2ap: mailbox@5070000 { + compatible = "cix,sky1-mbox"; + reg = <0x0 0x05070000 0x0 0x10000>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "rx"; + }; + + ap2pm_scmi_mem: shmem@6590000 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x06590000 0x0 0x80>; + reg-io-width = <4>; + }; + + mbox_ap2pm: mailbox@6590080 { + compatible = "cix,sky1-mbox"; + reg = <0x0 0x06590080 0x0 0xff80>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "tx"; + }; + + pm2ap_scmi_mem: shmem@65a0000 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x065a0000 0x0 0x80>; + reg-io-width = <4>; + }; + + mbox_pm2ap: mailbox@65a0080 { + compatible = "cix,sky1-mbox"; + reg = <0x0 0x065a0080 0x0 0xff80>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "rx"; + }; + + mbox_sfh2ap: mailbox@8090000 { + compatible = "cix,sky1-mbox"; + reg = <0x0 0x08090000 0x0 0x10000>; + interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "rx"; + }; + + mbox_ap2sfh: mailbox@80a0000 { + compatible = "cix,sky1-mbox"; + reg = <0x0 0x080a0000 0x0 0x10000>; + interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "tx"; + }; + + gic: interrupt-controller@e010000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0e010000 0 0x10000>, /* GICD */ + <0x0 0x0e090000 0 0x300000>; /* GICR * 12 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>; + #interrupt-cells = <4>; + interrupt-controller; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@e050000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x0e050000 0x0 0x30000>; + msi-controller; + #msi-cells = <1>; + }; + + ppi-partitions { + ppi_partition0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_partition1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7 &cpu8 &cpu9 &cpu10 &cpu11>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 89c90564c3d8..bdb9e9813e50 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -2,6 +2,7 @@ subdir-y += google dtb-$(CONFIG_ARCH_EXYNOS) += \ + exynos2200-g0s.dtb \ exynos5433-tm2.dtb \ exynos5433-tm2e.dtb \ exynos7-espresso.dtb \ diff --git a/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts new file mode 100644 index 000000000000..0e348c5cf7df --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung Galaxy S22+ (g0s/SM-S906B) device tree source + * + * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + */ + +/dts-v1/; +#include "exynos2200.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung Galaxy S22+ (SM-S906B)"; + compatible = "samsung,g0s", "samsung,exynos2200"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&cont_splash_mem>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + /* + * RTC clock (XrtcXTI); external, must be 32.768 kHz. + * + * TODO: Remove this once RTC clock is implemented properly as part of + * PMIC driver. + */ + rtcclk: clock-rtcclk { + compatible = "fixed-clock"; + clock-output-names = "rtcclk"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&key_volup>; + pinctrl-names = "default"; + + volup-key { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpa3 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>, + <0x8 0x80000000 0x1 0x7e000000>; + }; + + /* TODO: Remove this once PMIC is implemented */ + reg_dummy: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "dummy_reg"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cont_splash_mem: framebuffer@f6200000 { + reg = <0x0 0xf6200000 0x0 (1080 * 2340 * 4)>; + no-map; + }; + + debug_kinfo_reserved: debug-kinfo-reserved@fcfff000 { + reg = <0x0 0xfcfff000 0x0 0x1000>; + no-map; + }; + + log_itmon: log-itmon@fffe0000 { + reg = <0x0 0xfffe0000 0x0 0x20000>; + no-map; + }; + }; +}; + +&cmu_hsi0 { + clocks = <&xtcxo>, + <&rtcclk>, + <&cmu_top CLK_DOUT_CMU_HSI0_NOC>, + <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>, + <&cmu_top CLK_DOUT_CMU_HSI0_DPOSC>, + <&cmu_top CLK_DOUT_CMU_HSI0_USB32DRD>; + clock-names = "oscclk", "rtcclk", "noc", "dpgtc", "dposc", "usb"; +}; + +/* + * cpu2 and cpu3 fail to come up consistently, which leads to a hang later + * in the boot process. Disable them until the issue is figured out. + */ +&cpu2 { + status = "fail"; +}; + +&cpu3 { + status = "fail"; +}; + +&ext_26m { + clock-frequency = <26000000>; +}; + +&ext_200m { + clock-frequency = <200000000>; +}; + +&mct_peris { + status = "okay"; +}; + +&pinctrl_alive { + key_volup: key-volup-pins { + samsung,pins = "gpa3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; + }; +}; + +&ppi_cluster0 { + affinity = <&cpu0 &cpu1>; +}; + +&usb { + /* TODO: Replace these once PMIC is implemented */ + vdd10-supply = <®_dummy>; + vdd33-supply = <®_dummy>; + status = "okay"; +}; + +&usb32drd { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "peripheral"; + maximum-speed = "high-speed"; +}; + +&usb_hsphy { + /* TODO: Replace these once PMIC is implemented */ + vdda12-supply = <®_dummy>; + vdd-supply = <®_dummy>; + status = "okay"; +}; + +&xtcxo { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi new file mode 100644 index 000000000000..f618ff290604 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi @@ -0,0 +1,1765 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung's Exynos 2200 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "exynos-pinctrl.h" + +&pinctrl_alive { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa3: gpa3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa4: gpa4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpq0: gpq0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + gpq1: gpq1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + gpq2: gpq2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + bt_hostwake: bt-hostwake-pins { + samsung,pins = "gpa0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + uart1_bus: uart1-bus-pins { + samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + }; + + wlan_host_wake: wlan-host-wake-pins { + samsung,pins = "gpa0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&pinctrl_cmgp { + gpm0: gpm0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm1: gpm1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm2: gpm2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm3: gpm3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm4: gpm4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm5: gpm5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm6: gpm6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm7: gpm7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm8: gpm8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm9: gpm9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm10: gpm10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm11: gpm11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm12: gpm12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm13: gpm13-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm14: gpm14-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm15: gpm15-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm16: gpm16-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm17: gpm17-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm20: gpm20-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm21: gpm21-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm22: gpm22-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm23: gpm23-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpm24: gpm24-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + hsi2c24_bus: hsi2c24-bus-pins { + samsung,pins = "gpm0-0", "gpm0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c25_bus: hsi2c25-bus-pins { + samsung,pins = "gpm1-0", "gpm1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c26_bus: hsi2c26-bus-pins { + samsung,pins = "gpm2-0", "gpm2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c27_bus: hsi2c27-bus-pins { + samsung,pins = "gpm3-0", "gpm3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c28_bus: hsi2c28-bus-pins { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c29_bus: hsi2c29-bus-pins { + samsung,pins = "gpm5-0", "gpm5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c30_bus: hsi2c30-bus-pins { + samsung,pins = "gpm6-0", "gpm6-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c31_bus: hsi2c31-bus-pins { + samsung,pins = "gpm7-0", "gpm7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c32_bus: hsi2c32-bus-pins { + samsung,pins = "gpm8-0", "gpm8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c33_bus: hsi2c33-bus-pins { + samsung,pins = "gpm9-0", "gpm9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c34_bus: hsi2c34-bus-pins { + samsung,pins = "gpm10-0", "gpm10-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c35_bus: hsi2c35-bus-pins { + samsung,pins = "gpm11-0", "gpm11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c36_bus: hsi2c36-bus-pins { + samsung,pins = "gpm12-0", "gpm12-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c37_bus: hsi2c37-bus-pins { + samsung,pins = "gpm13-0", "gpm13-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c38_bus: hsi2c38-bus-pins { + samsung,pins = "gpm23-0", "gpm24-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi12_bus: spi12-bus-pins { + samsung,pins = "gpm0-0", "gpm0-1", "gpm1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi12_cs: spi12-cs-pins { + samsung,pins = "gpm1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpm1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi13_bus: spi13-bus-pins { + samsung,pins = "gpm2-0", "gpm2-1", "gpm3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi13_cs: spi13-cs-pins { + samsung,pins = "gpm3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpm3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi14_bus: spi14-bus-pins { + samsung,pins = "gpm4-0", "gpm4-1", "gpm5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi14_cs: spi14-cs-pins { + samsung,pins = "gpm5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpm5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi15_bus: spi15-bus-pins { + samsung,pins = "gpm6-0", "gpm6-1", "gpm7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi15_cs: spi15-cs-pins { + samsung,pins = "gpm7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi15_cs_func: spi15-cs-func-pins { + samsung,pins = "gpm7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi16_bus: spi16-bus-pins { + samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi16_cs: spi16-cs-pins { + samsung,pins = "gpm9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi16_cs_func: spi16-cs-func-pins { + samsung,pins = "gpm9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi17_bus: spi17-bus-pins { + samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi17_cs: spi17-cs-pins { + samsung,pins = "gpm11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi17_cs_func: spi17-cs-func-pins { + samsung,pins = "gpm11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi18_bus: spi18-bus-pins { + samsung,pins = "gpm12-0", "gpm12-1", "gpm13-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi18_cs: spi18-cs-pins { + samsung,pins = "gpm13-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi18_cs_func: spi18-cs-func-pins { + samsung,pins = "gpm13-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + uart14_bus_single: uart14-bus-single-pins { + samsung,pins = "gpm0-0", "gpm0-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart14_bus_dual: uart14-bus-dual-pins { + samsung,pins = "gpm0-0", "gpm0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart15_bus_single: uart15-bus-single-pins { + samsung,pins = "gpm3-0", "gpm3-1", "gpm4-0", "gpm4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart15_bus_dual: uart15-bus-dual-pins { + samsung,pins = "gpm3-0", "gpm3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart16_bus_single: uart16-bus-single-pins { + samsung,pins = "gpm5-0", "gpm5-1", "gpm6-0", "gpm6-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart16_bus_dual: uart16-bus-dual-pins { + samsung,pins = "gpm5-0", "gpm5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart17_bus_single: uart17-bus-single-pins { + samsung,pins = "gpm7-0", "gpm7-1", "gpm8-0", "gpm8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart17_bus_dual: uart17-bus-dual-pins { + samsung,pins = "gpm7-0", "gpm7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart18_bus_single: uart18-bus-single-pins { + samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0", "gpm9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart18_bus_dual: uart18-bus-dual-pins { + samsung,pins = "gpm8-0", "gpm8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart19_bus_single: uart19-bus-single-pins { + samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0", "gpm11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart19_bus_dual: uart19-bus-dual-pins { + samsung,pins = "gpm12-0", "gpm12-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart20_bus_single: uart20-bus-single-pins { + samsung,pins = "gpm13-0", "gpm13-1", "gpm14-0", "gpm14-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart20_bus_dual: uart20-bus-dual-pins { + samsung,pins = "gpm13-0", "gpm13-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + +}; + +&pinctrl_hsi1 { + gpf0: gpf0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie0_clkreq: pcie0-clkreq-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie0_perst: pcie0-perst-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie1_clkreq: pcie1-clkreq-pins { + samsung,pins = "gpf0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie1_perst: pcie1-perst-pins { + samsung,pins = "gpf0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; +}; + +&pinctrl_hsi1ufs { + gpf2: gpf2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gpf2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gpf2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_peric0 { + gpb0: gpb0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_i2s0_bus: aud-i2s0-bus-pins { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + aud_i2s1_bus: aud-i2s1-bus-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + aud_i2s2_bus: aud-i2s2-bus-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + aud_i2s3_bus: aud-i2s3-bus-pins { + samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + aud_i2s3_pci: aud-i2s3-pci-pins { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + aud_dsd_bus: aud-dsd-bus-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + decon_0_te: decon-0-te-pins { + samsung,pins = "gpg2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + }; + + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c0_bus: i3c0-bus-pins { + samsung,pins = "gpc0-0", "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c1_bus: i3c1-bus-pins { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c2_bus: i3c2-bus-pins { + samsung,pins = "gpc2-0", "gpc2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + uart6_bus_single: uart6-bus-single-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart6_bus_dual: uart6-bus-dual-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_peric1 { + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c15_bus: hsi2c15-bus-pins { + samsung,pins = "gpp7-2", "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c16_bus: hsi2c16-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c17_bus: hsi2c17-bus-pins { + samsung,pins = "gpp8-2", "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c18_bus: hsi2c18-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c19_bus: hsi2c19-bus-pins { + samsung,pins = "gpp9-2", "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c20_bus: hsi2c20-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c21_bus: hsi2c21-bus-pins { + samsung,pins = "gpp10-2", "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp10-2", "gpp10-1", "gpp10-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + uart9_bus_single: uart9-bus-single-pins { + samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart9_bus_dual: uart9-bus-dual-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart10_bus_single: uart10-bus-single-pins { + samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart10_bus_dual: uart10-bus-dual-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart11_bus_single: uart11-bus-single-pins { + samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart11_bus_dual: uart11-bus-dual-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart12_bus_single: uart12-bus-single-pins { + samsung,pins = "gpp10-3", "gpp10-2", "gpp10-1", "gpp10-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart12_bus_dual: uart12-bus-dual-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + +}; + +&pinctrl_peric2 { + gpc3: gpc3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc5: gpc5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc6: gpc6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc7: gpc7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc8: gpc8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc9: gpc9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp5-2", "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp6-2", "gpp6-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi2c22_bus: hsi2c22-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c3_bus: i3c3-bus-pins { + samsung,pins = "gpc3-0", "gpc3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c4_bus: i3c4-bus-pins { + samsung,pins = "gpc4-0", "gpc4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c5_bus: i3c5-bus-pins { + samsung,pins = "gpc5-0", "gpc5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c6_bus: i3c6-bus-pins { + samsung,pins = "gpc6-0", "gpc6-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c7_bus: i3c7-bus-pins { + samsung,pins = "gpc7-0", "gpc7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c8_bus: i3c8-bus-pins { + samsung,pins = "gpc8-0", "gpc8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c9_bus: i3c9-bus-pins { + samsung,pins = "gpc9-0", "gpc9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c10_bus: i3c10-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + i3c11_bus: i3c11-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + hsi223_bus: hsi2c23-bus-pins { + samsung,pins = "gpp11-2", "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi5_cs: spi5-cs-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp11-2", "gpp11-1", "gpp11-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>; + }; + + uart0_bus_single: uart0-bus-single-pins { + samsung,pins = "gpg0-2", "gpg0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + }; + + uart2_bus_single: uart2-bus-single-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart2_bus_dual: uart2-bus-dual-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart3_bus_single: uart3-bus-single-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart3_bus_dual: uart3-bus-dual-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart4_bus_single: uart4-bus-single-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart4_bus_dual: uart4-bus-dual-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart5_bus_single: uart5-bus-single-pins { + samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart5_bus_dual: uart5-bus-dual-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart7_bus_single: uart7-bus-single-pins { + samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart7_bus_dual: uart7-bus-dual-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart8_bus_single: uart8-bus-single-pins { + samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart8_bus_dual: uart8-bus-dual-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart13_bus_single: uart13-bus-single-pins { + samsung,pins = "gpp11-3", "gpp11-2", "gpp11-1", "gpp11-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart13_bus_dual: uart13-bus-dual-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_ufs { + gpf1: gpf1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_vts { + gpv0: gpv0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + amic_pdm0_bus: amic-pdm0-bus-pins { + samsung,pins = "gpv0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + amic_pdm1_bus: amic-pdm1-bus-pins { + samsung,pins = "gpv0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + amic_pdm2_bus: amic-pdm2-bus-pins { + samsung,pins = "gpv0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + dmic_bus_clk0: dmic-bus-clk0-pins { + samsung,pins = "gpv0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + dmic_bus_clk1: dmic-bus-clk1-pins { + samsung,pins = "gpv0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + dmic_bus_clk2: dmic-bus-clk2-pins { + samsung,pins = "gpv0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + dmic_pdm0_bus: dmic-pdm0-bus-pins { + samsung,pins = "gpv0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + dmic_pdm1_bus: dmic-pdm1-bus-pins { + samsung,pins = "gpv0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; + + dmic_pdm2_bus: dmic-pdm2-bus-pins { + samsung,pins = "gpv0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi new file mode 100644 index 000000000000..6b5ac02d010f --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi @@ -0,0 +1,561 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung's Exynos 2200 SoC device tree source + * + * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + */ + +#include <dt-bindings/clock/samsung,exynos2200-cmu.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "samsung,exynos2200"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_cmgp; + pinctrl2 = &pinctrl_hsi1; + pinctrl3 = &pinctrl_ufs; + pinctrl4 = &pinctrl_hsi1ufs; + pinctrl5 = &pinctrl_peric0; + pinctrl6 = &pinctrl_peric1; + pinctrl7 = &pinctrl_peric2; + pinctrl8 = &pinctrl_vts; + }; + + xtcxo: clock-1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "oscclk"; + }; + + ext_26m: clock-2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ext-26m"; + }; + + ext_200m: clock-3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ext-200m"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0x100>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0x200>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0x300>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0x400>; + capacity-dmips-mhz = <380>; + dynamic-power-coefficient = <560>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0x500>; + capacity-dmips-mhz = <380>; + dynamic-power-coefficient = <560>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0x600>; + capacity-dmips-mhz = <380>; + dynamic-power-coefficient = <560>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x2"; + reg = <0x700>; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <765>; + enable-method = "psci"; + cpu-idle-states = <&prime_cpu_sleep>; + }; + + idle-states { + entry-method = "psci"; + + little_cpu_sleep: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "c2"; + entry-latency-us = <70>; + exit-latency-us = <170>; + min-residency-us = <2000>; + arm,psci-suspend-param = <0x10000>; + }; + + big_cpu_sleep: cpu-sleep-1 { + compatible = "arm,idle-state"; + idle-state-name = "c2"; + entry-latency-us = <235>; + exit-latency-us = <220>; + min-residency-us = <3500>; + arm,psci-suspend-param = <0x10000>; + }; + + prime_cpu_sleep: cpu-sleep-2 { + compatible = "arm,idle-state"; + idle-state-name = "c2"; + entry-latency-us = <150>; + exit-latency-us = <190>; + min-residency-us = <2500>; + arm,psci-suspend-param = <0x10000>; + }; + }; + }; + + pmu-a510 { + compatible = "arm,cortex-a510-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a710 { + compatible = "arm,cortex-a710-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + pmu-x2 { + compatible = "arm,cortex-x2-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + ranges; + + #address-cells = <2>; + #size-cells = <2>; + + chipid@10000000 { + compatible = "samsung,exynos2200-chipid", + "samsung,exynos850-chipid"; + reg = <0x0 0x10000000 0x0 0x24>; + }; + + cmu_peris: clock-controller@10020000 { + compatible = "samsung,exynos2200-cmu-peris"; + reg = <0x0 0x10020000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, + <&cmu_top CLK_DOUT_CMU_PERIS_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIS_GIC>; + clock-names = "tcxo_div3", + "noc", + "gic"; + }; + + mct_peris: timer@10040000 { + compatible = "samsung,exynos2200-mct-peris", + "samsung,exynos4210-mct"; + reg = <0x0 0x10040000 0x0 0x800>; + clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>; + clock-names = "fin_pll", "mct"; + interrupts = <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 944 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 947 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 948 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 949 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + + gic: interrupt-controller@10200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x10200000 0x0 0x10000>, /* GICD */ + <0x0 0x10240000 0x0 0x200000>; /* GICR * 8 */ + + #interrupt-cells = <4>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6>; + }; + + ppi_cluster2: interrupt-partition-2 { + affinity = <&cpu7>; + }; + }; + }; + + cmu_peric0: clock-controller@10400000 { + compatible = "samsung,exynos2200-cmu-peric0"; + reg = <0x0 0x10400000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_PERIC0_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIC0_IP0>, + <&cmu_top CLK_DOUT_CMU_PERIC0_IP1>; + clock-names = "oscclk", "noc", "ip0", "ip1"; + }; + + syscon_peric0: syscon@10420000 { + compatible = "samsung,exynos2200-peric0-sysreg", "syscon"; + reg = <0x0 0x10420000 0x0 0x2000>; + }; + + pinctrl_peric0: pinctrl@10430000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x10430000 0x0 0x1000>; + }; + + cmu_peric1: clock-controller@10700000 { + compatible = "samsung,exynos2200-cmu-peric1"; + reg = <0x0 0x10700000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_PERIC1_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIC1_IP0>, + <&cmu_top CLK_DOUT_CMU_PERIC1_IP1>; + clock-names = "oscclk", "noc", "ip0", "ip1"; + }; + + syscon_peric1: syscon@10720000 { + compatible = "samsung,exynos2200-peric1-sysreg", "syscon"; + reg = <0x0 0x10720000 0x0 0x2000>; + }; + + pinctrl_peric1: pinctrl@10730000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x10730000 0x0 0x1000>; + }; + + cmu_hsi0: clock-controller@10a00000 { + compatible = "samsung,exynos2200-cmu-hsi0"; + reg = <0x0 0x10a00000 0x0 0x8000>; + #clock-cells = <1>; + }; + + usb32drd: phy@10aa0000 { + compatible = "samsung,exynos2200-usb32drd-phy"; + reg = <0x0 0x10aa0000 0x0 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>; + clock-names = "phy"; + + #phy-cells = <1>; + phys = <&usb_hsphy>; + phy-names = "hs"; + + samsung,pmu-syscon = <&pmu_system_controller>; + + status = "disabled"; + }; + + usb_hsphy: phy@10ab0000 { + compatible = "samsung,exynos2200-eusb2-phy"; + reg = <0x0 0x10ab0000 0x0 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>, + <&cmu_hsi0 CLK_MOUT_HSI0_NOC>, + <&cmu_hsi0 CLK_DOUT_DIV_CLK_HSI0_EUSB>; + clock-names = "ref", "bus", "ctrl"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb: usb@10b00000 { + compatible = "samsung,exynos2200-dwusb3"; + ranges = <0x0 0x0 0x10b00000 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>; + clock-names = "link_aclk"; + + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + usb_dwc3: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>; + clock-names = "ref"; + + interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH 0>; + + phys = <&usb32drd 0>; + phy-names = "usb2-phy"; + + snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; + snps,has-lpm-erratum; + snps,quirk-frame-length-adjustment = <0x20>; + snps,usb3_lpm_capable; + }; + }; + + cmu_ufs: clock-controller@11000000 { + compatible = "samsung,exynos2200-cmu-ufs"; + reg = <0x0 0x11000000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_UFS_NOC>, + <&cmu_top CLK_MOUT_CMU_UFS_MMC_CARD>, + <&cmu_top CLK_DOUT_CMU_UFS_UFS_EMBD>; + clock-names = "oscclk", "noc", "mmc", "ufs"; + }; + + syscon_ufs: syscon@11020000 { + compatible = "samsung,exynos2200-ufs-sysreg", "syscon"; + reg = <0x0 0x11020000 0x0 0x2000>; + }; + + pinctrl_ufs: pinctrl@11040000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11040000 0x0 0x1000>; + }; + + pinctrl_hsi1ufs: pinctrl@11060000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11060000 0x0 0x1000>; + }; + + pinctrl_hsi1: pinctrl@11240000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11240000 0x0 0x1000>; + }; + + cmu_peric2: clock-controller@11c00000 { + compatible = "samsung,exynos2200-cmu-peric2"; + reg = <0x0 0x11c00000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_PERIC2_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIC2_IP0>, + <&cmu_top CLK_DOUT_CMU_PERIC2_IP1>; + clock-names = "oscclk", "noc", "ip0", "ip1"; + }; + + syscon_peric2: syscon@11c20000 { + compatible = "samsung,exynos2200-peric2-sysreg", "syscon"; + reg = <0x0 0x11c20000 0x0 0x4000>; + }; + + pinctrl_peric2: pinctrl@11c30000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11c30000 0x0 0x1000>; + }; + + cmu_cmgp: clock-controller@14e00000 { + compatible = "samsung,exynos2200-cmu-cmgp"; + reg = <0x0 0x14e00000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_alive CLK_DOUT_ALIVE_CMGP_NOC>, + <&cmu_alive CLK_DOUT_ALIVE_CMGP_PERI>; + clock-names = "oscclk", "noc", "peri"; + }; + + syscon_cmgp: syscon@14e20000 { + compatible = "samsung,exynos2200-cmgp-sysreg", "syscon"; + reg = <0x0 0x14e20000 0x0 0x2000>; + }; + + pinctrl_cmgp: pinctrl@14e30000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x14e30000 0x0 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos2200-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + cmu_vts: clock-controller@15300000 { + compatible = "samsung,exynos2200-cmu-vts"; + reg = <0x0 0x15300000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_VTS_DMIC>; + clock-names = "oscclk", "dmic"; + }; + + pinctrl_vts: pinctrl@15320000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x15320000 0x0 0x1000>; + }; + + cmu_alive: clock-controller@15800000 { + compatible = "samsung,exynos2200-cmu-alive"; + reg = <0x0 0x15800000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_ALIVE_NOC>; + clock-names = "oscclk", "noc"; + }; + + pinctrl_alive: pinctrl@15850000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x15850000 0x0 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos2200-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + pmu_system_controller: system-controller@15860000 { + compatible = "samsung,exynos2200-pmu", + "samsung,exynos7-pmu", "syscon"; + reg = <0x0 0x15860000 0x0 0x10000>; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x3c00>; /* SYSTEM_CONFIGURATION */ + mask = <0x2>; /* SWRESET_SYSTEM */ + value = <0x2>; /* reset value */ + }; + }; + + cmu_top: clock-controller@1a320000 { + compatible = "samsung,exynos2200-cmu-top"; + reg = <0x0 0x1a320000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>; + clock-names = "oscclk"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + /* + * Non-updatable, broken stock Samsung bootloader does not + * configure CNTFRQ_EL0 + */ + clock-frequency = <25600000>; + }; +}; + +#include "exynos2200-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 8f02de8480b6..a1fb354dea9f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -85,7 +85,7 @@ }; }; - i2c_max98504: i2c-gpio-0 { + i2c_max98504: i2c-13 { compatible = "i2c-gpio"; sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>; scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts index 61eec1aff32e..b8ce433b93b1 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts @@ -89,7 +89,7 @@ memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0x3d800000>, - <0x0 0x80000000 0x7d800000>; + <0x0 0x80000000 0x40000000>; }; pwrseq_mmc1: pwrseq-mmc1 { diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts index eb97dcc41542..b1d9eff5a827 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts @@ -78,7 +78,7 @@ memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0x3e400000>, - <0x0 0x80000000 0xbe400000>; + <0x0 0x80000000 0x80000000>; }; pwrseq_mmc1: pwrseq-mmc1 { diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi index 5cba8c9bb403..d5d347623b90 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi @@ -327,6 +327,7 @@ phys = <&usbdrd_phy 0>; usb-role-switch; + snps,usb2-gadget-lpm-disable; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index 2cb8041c8a9f..0fdf2062930a 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -455,6 +455,26 @@ samsung,uart-fifosize = <256>; status = "disabled"; }; + + spi_0: spi@10880000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10880000 0x30>; + interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus &spi0_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 1>, <&pdma0 0>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <256>; + status = "disabled"; + }; }; usi_1: usi@108a00c0 { @@ -484,6 +504,26 @@ samsung,uart-fifosize = <256>; status = "disabled"; }; + + spi_1: spi@108a0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x108a0000 0x30>; + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus &spi1_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 3>, <&pdma0 2>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <256>; + status = "disabled"; + }; }; usi_2: usi@108c00c0 { @@ -513,6 +553,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_2: spi@108c0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x108c0000 0x30>; + interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus &spi2_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 5>, <&pdma0 4>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_3: usi@108e00c0 { @@ -542,6 +602,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_3: spi@108e0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x108e0000 0x30>; + interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_bus &spi3_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_4: usi@109000c0 { @@ -571,6 +651,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_4: spi@10900000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10900000 0x30>; + interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_bus &spi4_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_5: usi@109200c0 { @@ -600,6 +700,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_5: spi@10920000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10920000 0x30>; + interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_bus &spi5_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_6: usi@109400c0 { @@ -629,6 +749,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_6: spi@10940000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10940000 0x30>; + interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi6_bus &spi6_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 13>, <&pdma0 12>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_7: usi@109600c0 { @@ -658,6 +798,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_7: spi@10960000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10960000 0x30>; + interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi7_bus &spi7_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 15>, <&pdma0 14>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_8: usi@109800c0 { @@ -687,6 +847,27 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_8: spi@10980000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10980000 0x30>; + interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi8_bus &spi8_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 17>, <&pdma0 16>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; + }; pwm: pwm@109b0000 { @@ -752,6 +933,26 @@ samsung,uart-fifosize = <256>; status = "disabled"; }; + + spi_9: spi@10c80000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10c80000 0x30>; + interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi9_bus &spi9_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 1>, <&pdma1 0>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <256>; + status = "disabled"; + }; }; usi_10: usi@10ca00c0 { @@ -781,6 +982,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_10: spi@10ca0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10ca0000 0x30>; + interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi10_bus &spi10_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 3>, <&pdma1 2>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_11: usi@10cc00c0 { @@ -810,6 +1031,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_11: spi@10cc0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10cc0000 0x30>; + interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi11_bus &spi11_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 5>, <&pdma1 4>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_12: usi@10ce00c0 { @@ -839,6 +1080,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_12: spi@10ce0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10ce0000 0x30>; + interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi12_bus &spi12_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_13: usi@10d000c0 { @@ -868,6 +1129,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_13: spi@10d00000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d00000 0x30>; + interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi13_bus &spi13_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 9>, <&pdma1 8>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_14: usi@10d200c0 { @@ -897,6 +1178,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_14: spi@10d20000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d20000 0x30>; + interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi14_bus &spi14_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 11>, <&pdma1 10>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_15: usi@10d400c0 { @@ -926,6 +1227,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_15: spi@10d40000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d40000 0x30>; + interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi15_bus &spi15_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 13>, <&pdma1 12>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_16: usi@10d600c0 { @@ -955,6 +1276,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_16: spi@10d60000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d60000 0x30>; + interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi16_bus &spi16_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 15>, <&pdma1 14>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_17: usi@10d800c0 { @@ -984,6 +1325,26 @@ samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_17: spi@10d80000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d80000 0x30>; + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi17_bus &spi17_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 17>, <&pdma1 16>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; cmu_top: clock-controller@11000000 { @@ -1048,6 +1409,23 @@ interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; }; + cmu_hsi2: clock-controller@16b00000 { + compatible = "samsung,exynosautov920-cmu-hsi2"; + reg = <0x16b00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_HSI2_NOC>, + <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>, + <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>; + clock-names = "oscclk", + "noc", + "ufs", + "embd", + "ethernet"; + }; + pinctrl_hsi2: pinctrl@16c10000 { compatible = "samsung,exynosautov920-pinctrl"; reg = <0x16c10000 0x10000>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi index d6ddcc13f7b2..84ff3e047d3b 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi @@ -60,6 +60,21 @@ }; }; + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&nvmem_reboot_mode>; + nvmem-cell-names = "reboot-mode"; + mode-bootloader = <0x800000fc>; + mode-charge = <0x8000000a>; + mode-dm-verity-device-corrupted = <0x80000050>; + mode-fastboot = <0x800000fa>; + mode-reboot-ab-update = <0x80000052>; + mode-recovery = <0x800000ff>; + mode-rescue = <0x800000f9>; + mode-shutdown-thermal = <0x80000051>; + mode-shutdown-thermal-battery = <0x80000051>; + }; + /* TODO: Remove this once PMIC is implemented */ reg_placeholder: regulator-0 { compatible = "regulator-fixed"; @@ -85,6 +100,20 @@ }; }; +&acpm_ipc { + pmic { + compatible = "samsung,s2mpg10-pmic"; + interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + system-power-controller; + wakeup-source; + + regulators { + }; + }; +}; + &ext_24_5m { clock-frequency = <24576000>; }; @@ -188,6 +217,60 @@ }; }; }; + + pmic@66 { + compatible = "maxim,max77759"; + reg = <0x66>; + + pinctrl-0 = <&if_pmic_int>; + pinctrl-names = "default"; + interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio { + compatible = "maxim,max77759-gpio"; + + gpio-controller; + #gpio-cells = <2>; + /* + * "Human-readable name [SIGNAL_LABEL]" where the + * latter comes from the schematic + */ + gpio-line-names = "OTG boost [OTG_BOOST_EN]", + "max20339 IRQ [MW_OVP_INT_L]"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + nvmem-0 { + compatible = "maxim,max77759-nvmem"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + nvmem_reboot_mode: reboot-mode@0 { + reg = <0x0 0x4>; + }; + + boot-reason@4 { + reg = <0x4 0x4>; + }; + + shutdown-user-flag@8 { + reg = <0x8 0x1>; + }; + + rsoc@a { + reg = <0xa 0x2>; + }; + }; + }; + }; }; &pinctrl_far_alive { @@ -211,9 +294,22 @@ samsung,pin-pud = <GS101_PIN_PULL_UP>; samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; }; + + if_pmic_int: if-pmic-int-pins { + samsung,pins = "gpa8-3"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; }; &pinctrl_gpio_alive { + pmic_int: pmic-int-pins { + samsung,pins = "gpa0-6"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + key_power: key-power-pins { samsung,pins = "gpa10-1"; samsung,pin-function = <GS101_PIN_FUNC_EINT>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index 48c691fd0a3a..c0f8c25861a9 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -155,6 +155,7 @@ idle-state-name = "c2"; compatible = "arm,idle-state"; arm,psci-suspend-param = <0x0010000>; + local-timer-stop; entry-latency-us = <70>; exit-latency-us = <160>; min-residency-us = <2000>; @@ -164,6 +165,7 @@ idle-state-name = "c2"; compatible = "arm,idle-state"; arm,psci-suspend-param = <0x0010000>; + local-timer-stop; entry-latency-us = <150>; exit-latency-us = <190>; min-residency-us = <2500>; @@ -173,6 +175,7 @@ idle-state-name = "c2"; compatible = "arm,idle-state"; arm,psci-suspend-param = <0x0010000>; + local-timer-stop; entry-latency-us = <235>; exit-latency-us = <220>; min-residency-us = <3500>; @@ -1368,6 +1371,7 @@ <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>; clock-names = "core_clk", "sclk_unipro_main", "fmp", "aclk", "pclk", "sysreg"; + dma-coherent; freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>; pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; pinctrl-names = "default"; @@ -1415,10 +1419,7 @@ }; reboot: syscon-reboot { - compatible = "syscon-reboot"; - offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ - mask = <0x2>; /* SWRESET_SYSTEM */ - value = <0x2>; /* reset value */ + compatible = "google,gs101-reboot"; }; reboot-mode { @@ -1426,6 +1427,7 @@ offset = <0x0810>; /* EXYNOS_PMU_SYSIP_DAT0 */ mode-bootloader = <0xfc>; mode-charge = <0x0a>; + mode-dm-verity-device-corrupted = <0x50>; mode-fastboot = <0xfa>; mode-reboot-ab-update = <0x52>; mode-recovery = <0xff>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 0b473a23d120..23535ed47631 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -229,6 +229,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb + +imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \ + imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtbo +imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \ + imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb @@ -260,16 +268,16 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-lvds-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie-ep.dtb -imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo +imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo -imx8mp-tqma8mpql-mba8mp-ras314-lvds-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo -imx8mp-tqma8mpql-mba8mp-ras314-lvds-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo -dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb +imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo +imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-imx219.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb imx8mq-evk-pcie1-ep-dtbs += imx8mq-evk.dtb imx-pcie1-ep.dtbo @@ -301,6 +309,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb + +imx8qm-mek-ov5640-csi0-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi0.dtb +imx8qm-mek-ov5640-csi1-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi1.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi1.dtb +imx8qm-mek-ov5640-dual-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo imx8qm-mek-ov5640-csi1.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-dual.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb @@ -311,6 +327,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb imx8qxp-mek-pcie-ep-dtbs += imx8qxp-mek.dtb imx-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek-pcie-ep.dtb +imx8qxp-mek-ov5640-csi-dtbs := imx8qxp-mek.dtb imx8qxp-mek-ov5640-csi.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qxp-mek-ov5640-csi.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb @@ -324,6 +343,16 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb + +imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo +imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo +imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo +imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb + dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb @@ -339,6 +368,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts index 03748a7f657b..e04483fdb908 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts @@ -41,9 +41,21 @@ wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; }; +&sfp1 { + status = "okay"; +}; + +&sfp1_i2c { + status = "okay"; +}; + &usb2 { status = "okay"; }; #include "fsl-ls1043-post.dtsi" #include "tqmls104xa-mbls10xxa-fman.dtsi" + +&enet6 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi index 12d5f3938e5d..257d90bb9c20 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi @@ -17,11 +17,10 @@ qflash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index c0e3e8fa1e79..26bea88cb967 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -550,6 +550,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 36>, + <&edma0 1 37>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -563,6 +566,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 34>, + <&edma0 1 35>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -576,6 +582,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 40>, + <&edma0 1 41>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -717,6 +726,9 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg"; + dmas = <&edma0 1 32>, + <&edma0 1 33>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -727,6 +739,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 30>, + <&edma0 1 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -737,6 +752,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 28>, + <&edma0 1 29>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -747,6 +765,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 26>, + <&edma0 1 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -757,6 +778,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 24>, + <&edma0 1 25>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -767,6 +791,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 22>, + <&edma0 1 23>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts index 37834ae3deac..43261cda3fcf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts @@ -44,6 +44,22 @@ wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; }; +&sfp1 { + status = "okay"; +}; + +&sfp2 { + status = "okay"; +}; + +&sfp1_i2c { + status = "okay"; +}; + +&sfp2_i2c { + status = "okay"; +}; + &usb2 { status = "okay"; }; @@ -51,6 +67,10 @@ #include "fsl-ls1046-post.dtsi" #include "tqmls104xa-mbls10xxa-fman.dtsi" +&enet6 { + status = "okay"; +}; + &enet7 { - status = "disabled"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi index 4a8f8bc688f5..fa543db99def 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi @@ -17,11 +17,10 @@ qflash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; partitions { compatible = "fixed-partitions"; @@ -38,5 +37,6 @@ spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 983b2f0e8797..4a22fde38bea 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -523,6 +523,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 36>, + <&edma0 1 37>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -535,6 +538,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 34>, + <&edma0 1 35>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -547,6 +553,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 40>, + <&edma0 1 41>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -633,6 +642,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 32>, + <&edma0 1 33>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -643,6 +655,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 30>, + <&edma0 1 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -653,6 +668,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 28>, + <&edma0 1 29>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -663,6 +681,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 26>, + <&edma0 1 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -673,6 +694,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 24>, + <&edma0 1 25>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -683,6 +707,9 @@ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 22>, + <&edma0 1 23>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts index e567918f6afc..181eeab55aa0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts @@ -53,6 +53,14 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; }; +&sfp1 { + status = "okay"; +}; + +&sfp2 { + status = "okay"; +}; + &sfp1_i2c { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi index 9a0f21484be9..b8a213df238a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi @@ -17,11 +17,10 @@ qflash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; partitions { compatible = "fixed-partitions"; @@ -38,5 +37,6 @@ spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 4d721197d837..2d01e20b47e7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -43,12 +43,22 @@ reg = <0x00>; #address-cells = <1>; #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; }; mdio@8 { /* On-board PHY #2 RGMI2*/ reg = <0x8>; #address-cells = <1>; #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x2>; + }; }; mdio@18 { /* Slot #1 */ @@ -169,6 +179,16 @@ status = "okay"; }; +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + &dspi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi index d39242c1b9f7..2cf0f7208350 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -10,12 +10,264 @@ img_ipg_clk: clock-img-ipg { clock-output-names = "img_ipg_clk"; }; +img_pxl_clk: clock-img-pxl { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + clock-output-names = "img_pxl_clk"; +}; + img_subsys: bus@58000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x58000000 0x0 0x58000000 0x1000000>; + isi: isi@58100000 { + reg = <0x58100000 0x80000>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>, + <&pdma1_lpcg IMX_LPCG_CLK_0>, + <&pdma2_lpcg IMX_LPCG_CLK_0>, + <&pdma3_lpcg IMX_LPCG_CLK_0>, + <&pdma4_lpcg IMX_LPCG_CLK_0>, + <&pdma5_lpcg IMX_LPCG_CLK_0>, + <&pdma6_lpcg IMX_LPCG_CLK_0>, + <&pdma7_lpcg IMX_LPCG_CLK_0>; + clock-names = "per0", "per1", "per2", "per3", + "per4", "per5", "per6", "per7"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_ISI_CH0>, + <&pd IMX_SC_R_ISI_CH1>, + <&pd IMX_SC_R_ISI_CH2>, + <&pd IMX_SC_R_ISI_CH3>, + <&pd IMX_SC_R_ISI_CH4>, + <&pd IMX_SC_R_ISI_CH5>, + <&pd IMX_SC_R_ISI_CH6>, + <&pd IMX_SC_R_ISI_CH7>; + status = "disabled"; + }; + + irqsteer_csi0: irqsteer@58220000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x58220000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&img_ipg_clk>; + clock-names = "ipg"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_CSI_0>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + status = "disabled"; + }; + + gpio0_mipi_csi0: gpio@58222000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x58222000 0x1000>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&irqsteer_csi0>; + power-domains = <&pd IMX_SC_R_CSI_0>; + }; + + csi0_core_lpcg: clock-controller@58223018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58223018 0x4>; + clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "csi0_lpcg_core_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + csi0_esc_lpcg: clock-controller@5822301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5822301c 0x4>; + clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "csi0_lpcg_esc_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + i2c_mipi_csi0: i2c@58226000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x58226000 0x1000>; + interrupts = <8>; + clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>, + <&img_ipg_clk>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + interrupt-parent = <&irqsteer_csi0>; + power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>; + status = "disabled"; + }; + + mipi_csi_0: csi@58227000 { + compatible = "fsl,imx8qxp-mipi-csi2"; + reg = <0x58227000 0x1000>, + <0x58221000 0x1000>; + clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>, + <&csi0_esc_lpcg IMX_LPCG_CLK_4>, + <&csi0_pxl_lpcg IMX_LPCG_CLK_0>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>, + <&csi0_esc_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <360000000>, <72000000>; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + resets = <&scu_reset IMX_SC_R_CSI_0>; + status = "disabled"; + }; + + irqsteer_csi1: irqsteer@58240000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x58240000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&img_ipg_clk>; + clock-names = "ipg"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_CSI_1>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + status = "disabled"; + }; + + gpio0_mipi_csi1: gpio@58242000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x58242000 0x1000>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&irqsteer_csi1>; + power-domains = <&pd IMX_SC_R_CSI_1>; + }; + + csi1_core_lpcg: clock-controller@58243018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58243018 0x4>; + clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "csi1_lpcg_core_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + csi1_esc_lpcg: clock-controller@5824301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5824301c 0x4>; + clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "csi1_lpcg_esc_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + i2c_mipi_csi1: i2c@58246000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x58246000 0x1000>; + interrupts = <8>; + clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>, + <&img_ipg_clk>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + interrupt-parent = <&irqsteer_csi1>; + power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>; + status = "disabled"; + }; + + mipi_csi_1: csi@58247000 { + compatible = "fsl,imx8qxp-mipi-csi2"; + reg = <0x58247000 0x1000>, + <0x58241000 0x1000>; + clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>, + <&csi1_esc_lpcg IMX_LPCG_CLK_4>, + <&csi1_pxl_lpcg IMX_LPCG_CLK_0>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>, + <&csi1_esc_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <360000000>, <72000000>; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + resets = <&scu_reset IMX_SC_R_CSI_1>; + status = "disabled"; + }; + + irqsteer_parallel: irqsteer@58260000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x58260000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_dummy>; + clock-names = "ipg"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_PI_0>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + status = "disabled"; + }; + + pi0_ipg_lpcg: clock-controller@58263004 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58263004 0x4>; + clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_4>; + clock-output-names = "pi0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + pi0_pxl_lpcg: clock-controller@58263018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58263018 0x4>; + clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pi0_lpcg_pxl_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + pi0_misc_lpcg: clock-controller@5826301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5826301c 0x4>; + clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pi0_lpcg_misc_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + i2c0_parallel: i2c@58266000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x58266000 0x1000>; + interrupts = <8>; + clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>, + <&img_ipg_clk>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + interrupt-parent = <&irqsteer_parallel>; + power-domains = <&pd IMX_SC_R_PI_0_I2C_0>; + status = "disabled"; + }; + jpegdec: jpegdec@58400000 { reg = <0x58400000 0x00050000>; interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; @@ -40,6 +292,116 @@ img_subsys: bus@58000000 { <&pd IMX_SC_R_MJPEG_ENC_S0>; }; + pdma0_lpcg: clock-controller@58500000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58500000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + pdma1_lpcg: clock-controller@58510000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58510000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH1>; + }; + + pdma2_lpcg: clock-controller@58520000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58520000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma2_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH2>; + }; + + pdma3_lpcg: clock-controller@58530000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58530000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma3_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH3>; + }; + + pdma4_lpcg: clock-controller@58540000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58540000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma4_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH4>; + }; + + pdma5_lpcg: clock-controller@58550000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58550000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma5_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH5>; + }; + + pdma6_lpcg: clock-controller@58560000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58560000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma6_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH6>; + }; + + pdma7_lpcg: clock-controller@58570000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58570000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "pdma7_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH7>; + }; + + csi0_pxl_lpcg: clock-controller@58580000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58580000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "csi0_lpcg_pxl_clk"; + power-domains = <&pd IMX_SC_R_CSI_0>; + }; + + csi1_pxl_lpcg: clock-controller@58590000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58590000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "csi1_lpcg_pxl_clk"; + power-domains = <&pd IMX_SC_R_CSI_1>; + }; + + hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585a0000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>; + clock-output-names = "hdmi_rx_lpcg_pxl_link_clk"; + power-domains = <&pd IMX_SC_R_HDMI_RX>; + }; + img_jpeg_dec_lpcg: clock-controller@585d0000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x585d0000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi new file mode 100644 index 000000000000..3e04142aca5c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/firmware/imx/rsrc.h> + +security_subsys: bus@31400000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x31400000 0x0 0x31400000 0x90000>; + + crypto: crypto@31400000 { + compatible = "fsl,imx8qm-caam", "fsl,sec-v4.0"; + reg = <0x31400000 0x90000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x31400000 0x90000>; + power-domains = <&pd IMX_SC_R_CAAM_JR2>; + fsl,sec-era = <9>; + + sec_jr2: jr@30000 { + compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_CAAM_JR2>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_CAAM_JR3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index 21bcd82fd092..8287a7f66ed3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -294,6 +294,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 5a3b1142ddf4..37db4f0dd505 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -418,6 +418,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index d8b67e12f7d7..272c2b223d16 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -833,6 +833,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 46d1ee0a4ee8..c09b40fc6dec 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -743,6 +743,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index c0aadff4e25b..636daa3d6ca2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -621,6 +621,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts index 86a610de84fe..99572961d9e1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -682,6 +682,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index cfebaa01217e..ded89b046970 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -915,6 +915,8 @@ clocks = <&clk IMX8MM_CLK_UART2_ROOT>, <&clk IMX8MM_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index 67a99383a632..917b7d0007a7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -305,6 +305,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MN_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts index dc94d73f7106..d7f7f9aafb7d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts @@ -79,6 +79,10 @@ <&clk IMX8MN_AUDIO_PLL2_OUT>; }; +&sound { + audio-asrc = <&easrc>; +}; + &tlv320aic3x04 { clock-names = "mclk"; clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi index 640c41b51af9..1d23814e11cd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -52,6 +52,10 @@ cpu-supply = <&buck2_reg>; }; +&easrc { + status = "okay"; +}; + &flexspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 30c286b34aa5..a5f52f60169e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -693,6 +693,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MN_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 848ba5e46ee6..b98b3d0ddf25 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -860,6 +860,8 @@ clocks = <&clk IMX8MN_CLK_UART2_ROOT>, <&clk IMX8MN_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 1ba3018c621e..c0cc5611048e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -168,37 +168,6 @@ #sound-dai-cells = <1>; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "wm8960-audio"; - simple-audio-card,format = "i2s"; - simple-audio-card,frame-master = <&cpudai>; - simple-audio-card,bitclock-master = <&cpudai>; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Speaker", "External Speaker", - "Microphone", "Mic Jack"; - simple-audio-card,routing = - "Headphone Jack", "HP_L", - "Headphone Jack", "HP_R", - "External Speaker", "SPK_LP", - "External Speaker", "SPK_LN", - "External Speaker", "SPK_RP", - "External Speaker", "SPK_RN", - "LINPUT1", "Mic Jack", - "LINPUT3", "Mic Jack", - "Mic Jack", "MICB"; - - cpudai: simple-audio-card,cpu { - sound-dai = <&sai3>; - }; - - simple-audio-card,codec { - sound-dai = <&wm8960>; - }; - - }; - sound-bt-sco { compatible = "simple-audio-card"; simple-audio-card,name = "bt-sco-audio"; @@ -239,6 +208,26 @@ }; }; + sound-wm8960 { + compatible = "fsl,imx-audio-wm8960"; + audio-asrc = <&easrc>; + audio-codec = <&wm8960>; + audio-cpu = <&sai3>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "Mic Jack", "MICB"; + hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + model = "wm8960-audio"; + pinctrl-0 = <&pinctrl_hpdet>; + pinctrl-names = "default"; + }; + sound-xcvr { compatible = "fsl,imx-audio-card"; model = "imx-audio-xcvr"; @@ -319,6 +308,11 @@ status = "okay"; }; +&easrc { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; @@ -952,6 +946,12 @@ >; }; + pinctrl_hpdet: hpdetgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0xd6 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi index 2ce1860b244d..f269f7a004fc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi @@ -89,4 +89,22 @@ <1039500000>; }; +&vpu_g1 { + assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>; +}; + +&vpu_g2 { + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <500000000>; +}; + +&vpumix_blk_ctrl { + assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>; + assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>, <600000000>; +}; + /delete-node/ &{noc_opp_table/opp-1000000000}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h index 0fef066471ba..16f5899de415 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h @@ -6,6 +6,39 @@ #ifndef __DTS_IMX8MP_PINFUNC_H #define __DTS_IMX8MP_PINFUNC_H +/* Drive Strength */ +#define MX8MP_DSE_X1 0x0 +#define MX8MP_DSE_X2 0x4 +#define MX8MP_DSE_X4 0x2 +#define MX8MP_DSE_X6 0x6 + +/* Slew Rate */ +#define MX8MP_FSEL_FAST 0x10 +#define MX8MP_FSEL_SLOW 0x0 + +/* Open Drain */ +#define MX8MP_ODE_ENABLE 0x20 +#define MX8MP_ODE_DISABLE 0x0 + +#define MX8MP_PULL_DOWN 0x0 +#define MX8MP_PULL_UP 0x40 + +/* Hysteresis */ +#define MX8MP_HYS_CMOS 0x0 +#define MX8MP_HYS_SCHMITT 0x80 + +#define MX8MP_PULL_ENABLE 0x100 +#define MX8MP_PULL_DISABLE 0x0 + +/* SION force input mode */ +#define MX8MP_SION 0x40000000 + +/* long defaults */ +#define MX8MP_USDHC_DATA_DEFAULT (MX8MP_FSEL_FAST | MX8MP_PULL_UP | \ + MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) +#define MX8MP_I2C_DEFAULT (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | \ + MX8MP_PULL_ENABLE | MX8MP_SION) + /* * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts index 55b8c5c14fb4..6f9dcd3a75c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts @@ -102,11 +102,6 @@ <&pinctrl_gpio13>; }; -&gpio3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lvds_dsi_sel>; -}; - &gpio4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_gpio6>; @@ -213,6 +208,7 @@ #pwm-cells = <2>; fan { + cooling-levels = <255>; pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi index 22f6daabdb90..bebe19eb360f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi @@ -320,6 +320,8 @@ }; &gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_dsi_sel>; gpio-line-names = "ETH_0_INT#", /* 0 */ "SLEEP#", "", @@ -349,14 +351,6 @@ "", "", "SMARC_I2C_PM_CK"; - - lvds_dsi_mux_hog: lvds-dsi-mux-hog { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - line-name = "LVDS_DSI_SEL"; - /* LVDS_DSI_SEL as DSI */ - output-low; - }; }; &gpio4 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso index ea44d605342b..ea44d605342b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 23c612e80dd3..33cd92e63c5d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -235,6 +235,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; model = "tqm-tlv320aic32"; + audio-asrc = <&easrc>; audio-cpu = <&sai3>; audio-codec = <&tlv320aic3x04>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index 6067ca3be814..fd70b686e7ef 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -30,6 +30,10 @@ cpu-supply = <&buck2_reg>; }; +&easrc { + status = "okay"; +}; + &flexspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso new file mode 100644 index 000000000000..e3965caca6be --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2025 GOcontroll B.V. + * Author: Maud Spierings <maudspierings@gocontroll.com> + */ + +#include <dt-bindings/clock/imx8mp-clock.h> +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mp-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + model = "GOcontroll Moduline Display with BOE av101hdt-a10 display"; + + panel { + compatible = "boe,av101hdt-a10"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_panel>; + pinctrl-names = "default"; + power-supply = <®_3v3_per>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + + port { + panel_lvds_in: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; + + reg_vbus: regulator-vbus { + compatible = "regulator-fixed"; + power-supply = <®_6v4>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-c-vbus"; + }; +}; + +&iomuxc { + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 + MX8MP_DSE_X1 + >; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */ + assigned-clock-rates = <0>, <1054620000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&panel_lvds_in>; + }; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + pd-disable; + vbus-supply = <®_vbus>; + + port { + high_speed_ep: endpoint { + remote-endpoint = <&usb1_hs_ep>; + }; + }; + }; + + port { + usb1_hs_ep: endpoint { + remote-endpoint = <&high_speed_ep>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso new file mode 100644 index 000000000000..3eb665ce9d5d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2025 GOcontroll B.V. + * Author: Maud Spierings <maudspierings@gocontroll.com> + */ + +#include <dt-bindings/gpio/gpio.h> + +#include "imx8mp-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + model = "GOcontroll Moduline Display with BOE av123z7m-n17 display"; + + panel { + compatible = "boe,av123z7m-n17"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_panel>; + pinctrl-names = "default"; + power-supply = <®_3v3_per>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + + panel_in0: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + + panel_in1: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + /* sn65dsi85 */ + bridge@2d { + compatible = "ti,sn65dsi84"; + reg = <0x2d>; + enable-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_lvds_bridge>; + pinctrl-names = "default"; + vcc-supply = <®_1v8_per>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_lvds_bridge_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + + port@3 { + reg = <3>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + }; + }; + + /* max25014 @ 0x6f */ +}; + +&iomuxc { + pinctrl_lvds_bridge: lvdsbridgegrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 + MX8MP_DSE_X1 + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 + MX8MP_DSE_X1 + >; + }; +}; + +&lcdif1 { + status = "okay"; +}; + +&mipi_dsi { + /* + * burst has to be at least 2x dsi clock that the sn65dsi85 expects + * display pixelclock * bpp / lanes / 2 = dsi clock + * 88.000.000 * 24 / 4 / 2 = 264.000.000 + * range gets rounded up to 265.000.000 - 270.000.000 + * 267.500.000 * 2 = 535.000.000 + */ + samsung,burst-clock-frequency = <535000000>; + samsung,esc-clock-frequency = <12000000>; + status = "okay"; + + ports { + port@1 { + mipi_dsi_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = < &dsi_lvds_bridge_in>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts new file mode 100644 index 000000000000..afd886dd590f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2025 GOcontroll B.V. + * Author: Maud Spierings <maudspierings@gocontroll.com> + */ + +/dts-v1/; + +#include "imx8mp-tx8p-ml81.dtsi" + +/ { + compatible = "gocontroll,moduline-display", "fsl,imx8mp"; + chassis-type = "embedded"; + hardware = "Moduline Display V1.06"; + model = "GOcontroll Moduline Display baseboard"; + + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &eqos; + ethernet1 = &fec; + mmc0 = &usdhc3; + mmc1 = &usdhc2; + rtc0 = &rtc_pcf; /* i2c rtc is the main rtc */ + rtc1 = &snvs_rtc; + spi0 = &ecspi2; /* spidev number compatibility */ + spi1 = &ecspi1; /* spidev number compatibility */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + external-sensor-supply { + compatible = "regulator-output"; + vout-supply = <®_5v0_sensor>; + }; + + reg_1v8_per: regulator-1v8-per { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_reg_1v8>; + pinctrl-names = "default"; + power-supply = <®_3v3_per>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "1v8-per"; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3v3_per: regulator-3v3-per { + compatible = "regulator-fixed"; + power-supply = <®_6v4>; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3-per"; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + power-supply = <®_6v4>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "5v0"; + }; + + reg_5v0_sensor: regulator-5v0-sensor { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_reg_5v0_sensor>; + pinctrl-names = "default"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "5v0-supply-external-sensor"; + gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_6v4: regulator-6v4 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <6400000>; + regulator-min-microvolt = <6400000>; + regulator-name = "6v4"; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can1-stby"; + gpio = <&gpio4 3 GPIO_ACTIVE_LOW>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can2-stby"; + gpio = <&gpio5 9 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,name = "tas2505-audio"; + simple-audio-card,routing = "Speaker", "DAC"; + simple-audio-card,widgets = "Speaker", "Speaker External"; + + simple-audio-card,codec { + sound-dai = <&tas2505>; + }; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai6>; + }; + }; + + wifi_powerseq: wifi-powerseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&pinctrl_wl_reg>; + pinctrl-names = "default"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <500000>; + reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + }; +}; + +&ecspi1 { + cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>, + <&gpio1 11 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_ecspi1>; + pinctrl-names = "default"; + status = "okay"; + + connector@0 { + compatible = "gocontroll,moduline-module-slot"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + i2c-bus = <&i2c2>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + slot-number = <1>; + spi-max-frequency = <54000000>; + sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + vddhpp-supply = <®_6v4>; + vddp-supply = <®_5v0>; + vdd-supply = <®_3v3_per>; + }; + + connector@1 { + compatible = "gocontroll,moduline-module-slot"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + i2c-bus = <&i2c2>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + slot-number = <2>; + spi-max-frequency = <54000000>; + sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + vddhpp-supply = <®_6v4>; + vddp-supply = <®_5v0>; + vdd-supply = <®_3v3_per>; + }; + + adc@2 { + compatible = "microchip,mcp3004"; + reg = <2>; + spi-max-frequency = <2300000>; + vref-supply = <®_vdd_3v3>; + }; +}; + +&flexcan1 { + pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default"; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default"; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + tas2505: audio-codec@18 { + compatible = "ti,tas2505"; + reg = <0x18>; + clocks = <&clk IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + aic32x4-gpio-func = <0xff 0xff 0xff 0xff 0xff>; + av-supply = <®_1v8_per>; + dv-supply = <®_1v8_per>; + iov-supply = <®_vdd_3v3>; + pinctrl-0 = <&pinctrl_tas_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + }; + + rtc_pcf: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 + MX8MP_DSE_X1 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI + MX8MP_DSE_X4 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO + (MX8MP_DSE_X4 | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK + MX8MP_DSE_X4 + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 + MX8MP_DSE_X1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_TXD__CAN2_RX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_UART3_RXD__CAN2_TX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_usdhc2: pinctrlusdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + >; + }; + + pinctrl_reg_1v8: reg-1v8-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 + MX8MP_DSE_X1 + >; + }; + + pinctrl_reg_5v0_sensor: reg-5v0-sensorgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 + MX8MP_DSE_X1 + >; + }; + + pinctrl_sai6: sai6grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + >; + }; + + pinctrl_tas_reset: tasresetgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 + MX8MP_DSE_X1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B + (MX8MP_DSE_X6 | MX8MP_HYS_SCHMITT) + >; + }; + + pinctrl_wl_int: wlintgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 + (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_wl_reg: wlreggrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 + MX8MP_DSE_X1 + >; + }; +}; + +&sai6 { + assigned-clocks = <&clk IMX8MP_CLK_SAI6>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + pinctrl-0 = <&pinctrl_sai6>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&pinctrl_uart1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&pinctrl_uart2>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt"; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + max-speed = <921600>; + pinctrl-0 = <&pinctrl_bt>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + vbat-supply = <®_3v3_per>; + vddio-supply = <®_3v3_per>; + }; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "peripheral"; +}; + +&usdhc2 { + #address-cells = <1>; + #size-cells = <0>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <50000000>; + cap-power-off-card; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&wifi_powerseq>; + non-removable; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default"; + sd-uhs-sdr25; + vmmc-supply = <®_3v3_per>; + status = "okay"; + + wifi@1 { + compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + pinctrl-0 = <&pinctrl_wl_int>; + pinctrl-names = "default"; + brcm,board-type = "GOcontroll,moduline"; + }; +}; + +&wdog1 { + pinctrl-0 = <&pinctrl_wdog>; + pinctrl-names = "default"; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi new file mode 100644 index 000000000000..fe8ba16eb40e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020 Lothar Waßmann <LW@KARO-electronics.de> + * 2025 Maud Spierings <maudspierings@gocontroll.com> + */ + +#include "imx8mp.dtsi" + +/ { + /* PHY regulator */ + regulator-3v3-etn { + compatible = "regulator-fixed"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&pinctrl_reg_3v3_etn>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3-etn"; + vin-supply = <®_vdd_3v3>; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&eqos { + assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_50M>; + assigned-clock-rates = <266000000>, <100000000>, <50000000>; + phy-handle = <ðphy0>; + phy-mode = "rmii"; + pinctrl-0 = <&pinctrl_eqos>; + pinctrl-1 = <&pinctrl_eqos_sleep>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pinctrl_ethphy_rst_b>; + pinctrl-names = "default"; + reset-delay-us = <25000>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk IMX8MP_CLK_ENET_QOS>; + pinctrl-0 = <&pinctrl_ethphy_int_b>; + pinctrl-names = "default"; + smsc,disable-energy-detect; + }; + }; +}; + +&gpio1 { + gpio-line-names = "SODIMM_152", + "SODIMM_42", + "PMIC_WDOG_B SODIMM_153", + "PMIC_IRQ_B", + "SODIMM_154", + "SODIMM_155", + "SODIMM_156", + "SODIMM_157", + "SODIMM_158", + "SODIMM_159", + "SODIMM_161", + "SODIMM_162", + "SODIMM_34", + "SODIMM_36", + "SODIMM_27", + "SODIMM_28", + "ENET_MDC", + "ENET_MDIO", + "", + "ENET_XTAL1/CLKIN", + "ENET_TXD1", + "ENET_TXD0", + "ENET_TXEN", + "ENET_POWER", + "ENET_COL/CRS_DV", + "ENET_RXER", + "ENET_RXD0", + "ENET_RXD1", + "", + "", + "", + ""; +}; + +&gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_51", + "SODIMM_57", + "SODIMM_56", + "SODIMM_52", + "SODIMM_53", + "SODIMM_54", + "SODIMM_55", + "SODIMM_15", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&gpio3 { + gpio-line-names = "", + "", + "EMMC_DS", + "EMMC_DAT5", + "EMMC_DAT6", + "EMMC_DAT7", + "", + "", + "", + "", + "EMMC_DAT0", + "EMMC_DAT1", + "EMMC_DAT2", + "EMMC_DAT3", + "", + "EMMC_DAT4", + "", + "EMMC_CLK", + "EMMC_CMD", + "SODIMM_75", + "SODIMM_145", + "SODIMM_163", + "SODIMM_164", + "SODIMM_165", + "SODIMM_143", + "SODIMM_144", + "SODIMM_72", + "SODIMM_73", + "SODIMM_74", + "SODIMM_93", + "", + ""; +}; + +&gpio4 { + gpio-line-names = "SODIMM_98", + "SODIMM_99", + "SODIMM_100", + "SODIMM_101", + "SODIMM_45", + "SODIMM_43", + "SODIMM_105", + "SODIMM_106", + "SODIMM_107", + "SODIMM_108", + "SODIMM_104", + "SODIMM_103", + "SODIMM_115", + "SODIMM_114", + "SODIMM_113", + "SODIMM_112", + "SODIMM_109", + "SODIMM_110", + "SODIMM_95", + "SODIMM_96", + "SODIMM_97", + "ENET_nINT", + "ENET_nRST", + "SODIMM_84", + "SODIMM_87", + "SODIMM_86", + "SODIMM_85", + "SODIMM_83", + "", + "SODIMM_66", + "SODIMM_65", + ""; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "SODIMM_76", + "SODIMM_81", + "SODIMM_146", + "SODIMM_48", + "SODIMM_46", + "SODIMM_47", + "SODIMM_44", + "SODIMM_49", + "", + "SODIMM_70", + "SODIMM_69", + "PMIC_SCL", + "PMIC_SDA", + "SODIMM_41", + "SODIMM_40", + "SODIMM_148", + "SODIMM_149", + "SODIMM_150", + "SODIMM_151", + "SODIMM_60", + "SODIMM_59", + "SODIMM_64", + "SODIMM_63", + "SODIMM_62", + "SODIMM_61", + "SODIMM_68", + "SODIMM_67", + "", + ""; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <805000>; + regulator-name = "vdd-soc"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <805000>; + regulator-name = "vdd-core"; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3"; + }; + + reg_nvcc_nand: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "nvcc-nand"; + }; + + reg_nvcc_dram: BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "nvcc-dram"; + }; + + reg_snvs_1v8: LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "snvs-1v8"; + }; + + ldo2_reg: LDO2 { + regulator-always-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <800000>; + regulator-name = "LDO2"; + }; + + reg_vdda_1v8: LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vdda-1v8"; + }; + + ldo4_reg: LDO4 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <800000>; + regulator-name = "LDO4"; + }; + + ldo5_reg: LDO5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "LDO5"; + }; + }; + }; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_SION) + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER + (MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + >; + }; + + pinctrl_eqos_sleep: eqos-sleep-grp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_ethphy_int_b: ethphy-int-bgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + >; + }; + + pinctrl_ethphy_rst_b: ethphy-rst-bgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 + (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_reg_3v3_etn: reg-3v3-etngrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <200000000>; + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + vmmc-supply = <®_vdd_3v3>; + voltage-ranges = <3300 3300>; + vqmmc-supply = <®_nvcc_nand>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi index b59da91fdd04..29f080904482 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi @@ -55,6 +55,24 @@ states = <3300000 0x0 1800000 0x1>; vin-supply = <&ldo5>; }; + + reg_phy_supply: regulator-phy-supply { + compatible = "regulator-fixed"; + regulator-name = "phy-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_phy_vddio: regulator-phy-vddio { + compatible = "regulator-fixed"; + regulator-name = "vddio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; &A53_0 { @@ -73,6 +91,53 @@ cpu-supply = <&buck2>; }; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100000>; + vddio-supply = <®_phy_vddio>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; + }; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -239,6 +304,27 @@ &iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x10 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x150 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi index 10713c34ff39..cbf0c9a740fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -434,6 +434,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 568d24265ddf..12de7cf1e853 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -301,7 +301,7 @@ &gpio3 { gpio-line-names = "", "", "", "", "", "", "m2_rst", "", - "", "", "", "", "", "", "m2_gpio10", "", + "", "", "", "", "", "", "m2_wdis2#", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; @@ -310,7 +310,7 @@ gpio-line-names = "", "", "m2_off#", "", "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "m2_wdis#", "", "", "", "", "", + "", "", "m2_wdis1#", "", "", "", "", "", "", "", "", "", "", "", "", "rs485_en"; }; @@ -811,14 +811,14 @@ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40000040 /* M2SKT_OFF# */ - MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */ + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS1# */ MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40000040 /* M2SKT_PIN20 */ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000040 /* M2SKT_PIN22 */ MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x40000150 /* PCIE1_WDIS# */ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */ - MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_GPIO10 */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000150 /* M2KST_WDIS2# */ MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */ MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */ MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 948b88cf5e9d..bb24dba7338e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -320,7 +320,10 @@ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -350,7 +353,10 @@ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -876,24 +882,17 @@ pgc_vpu_g1: power-domain@11 { #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; reg = <IMX8MP_POWER_DOMAIN_VPU_G1>; - clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; }; pgc_vpu_g2: power-domain@12 { #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; reg = <IMX8MP_POWER_DOMAIN_VPU_G2>; - clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; - }; pgc_vpu_vc8000e: power-domain@13 { #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>; - clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; }; pgc_hdmimix: power-domain@14 { @@ -2235,6 +2234,7 @@ <&clk IMX8MP_CLK_GPU_ROOT>, <&clk IMX8MP_CLK_GPU_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>, <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, @@ -2251,6 +2251,7 @@ <&clk IMX8MP_CLK_GPU_ROOT>, <&clk IMX8MP_CLK_GPU_AHB>; clock-names = "core", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; assigned-clock-rates = <1000000000>; @@ -2263,8 +2264,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; - assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; - assigned-clock-rates = <600000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; }; @@ -2273,9 +2274,9 @@ reg = <0x38310000 0x10000>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; - assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; - assigned-clock-rates = <500000000>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>, <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <700000000>, <700000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; }; @@ -2290,9 +2291,9 @@ <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; - assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>; - assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; - assigned-clock-rates = <600000000>, <600000000>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>; @@ -2308,6 +2309,7 @@ <&clk IMX8MP_CLK_ML_AXI>, <&clk IMX8MP_CLK_ML_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; power-domains = <&pgc_mlmix>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso new file mode 100644 index 000000000000..ceb63c28b21a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 NXP + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/media/video-interfaces.h> + +&i2c_mipi_csi0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c_mipi_csi0>; + pinctrl-names = "default"; + status = "okay"; + + ov5640_mipi_0: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&xtal24m>; + clock-names = "xclk"; + pinctrl-0 = <&pinctrl_mipi_csi0>; + pinctrl-names = "default"; + powerdown-gpios = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; + + port { + ov5640_mipi_0_ep: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi0_in>; + }; + }; + }; +}; + +&irqsteer_csi0 { + status = "okay"; +}; + +&isi { + status = "okay"; +}; + +&mipi_csi_0 { + status = "okay"; + + ports { + port@0 { + mipi_csi0_in: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&ov5640_mipi_0_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso new file mode 100644 index 000000000000..9e6d33c0315e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 NXP + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/media/video-interfaces.h> + +&i2c_mipi_csi1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c_mipi_csi1>; + pinctrl-names = "default"; + status = "okay"; + + ov5640_mipi_1: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&xtal24m>; + clock-names = "xclk"; + pinctrl-0 = <&pinctrl_mipi_csi1>; + pinctrl-names = "default"; + powerdown-gpios = <&lsio_gpio1 31 GPIO_ACTIVE_HIGH>; + reset-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; + + port { + ov5640_mipi_1_ep: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi1_in>; + }; + }; + }; +}; + +&irqsteer_csi1 { + status = "okay"; +}; + +&isi { + status = "okay"; +}; + +&mipi_csi_1 { + status = "okay"; + + ports { + port@0 { + mipi_csi1_in: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&ov5640_mipi_1_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 353f825a8ac5..95523c538135 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -32,6 +32,13 @@ reg = <0x00000000 0x80000000 0 0x40000000>; }; + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -113,6 +120,15 @@ reg = <0 0x94300000 0 0x100000>; no-map; }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0xc0000000 0 0x3c000000>; + size = <0 0x3c000000>; + linux,cma-default; + reusable; + }; }; lvds_backlight0: backlight-lvds0 { @@ -131,6 +147,72 @@ default-brightness-level = <80>; }; + i2c-mux { + compatible = "i2c-mux-gpio"; + mux-gpios = <&lsio_gpio5 3 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */ + i2c-parent = <&i2c1>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + wm8960: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + wm8962: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + DCVDD-supply = <®_audio_1v8>; + DBVDD-supply = <®_audio_1v8>; + AVDD-supply = <®_audio_1v8>; + CPVDD-supply = <®_audio_1v8>; + MICVDD-supply = <®_audio_3v3>; + PLLVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + + }; + mux-controller { compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; @@ -146,6 +228,27 @@ }; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_2v8: regulator-2v8 { + compatible = "regulator-fixed"; + regulator-name = "2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + reg_usdhc2_vmmc: usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -314,6 +417,21 @@ "Mic Jack", "MICB"; }; + sound-wm8962 { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8962>; + hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + audio-routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN1R", "AMIC", + "IN3R", "AMIC"; + }; + imx8qm-cm4-0 { compatible = "fsl,imx8qm-cm4"; clocks = <&clk_dummy>; @@ -511,26 +629,6 @@ scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>; sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>; status = "okay"; - - wm8960: audio-codec@1a { - compatible = "wlf,wm8960"; - reg = <0x1a>; - clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; - clock-names = "mclk"; - assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, - <&mclkout0_lpcg IMX_LPCG_CLK_0>; - assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>; - wlf,shared-lrclk; - wlf,hp-cfg = <2 2 3>; - wlf,gpio-cfg = <1 3>; - AVDD-supply = <®_audio_3v3>; - DBVDD-supply = <®_audio_1v8>; - DCVDD-supply = <®_audio_1v8>; - SPKVDD1-supply = <®_audio_5v>; - SPKVDD2-supply = <®_audio_5v>; - }; }; &i2c1_lvds0 { @@ -815,6 +913,20 @@ >; }; + pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp { + fsl,pins = < + IMX8QM_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020 + IMX8QM_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020 + >; + }; + + pinctrl_i2c_mipi_csi1: i2c-mipi-csi1grp { + fsl,pins = < + IMX8QM_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL 0xc2000020 + IMX8QM_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA 0xc2000020 + >; + }; + pinctrl_i2c0: i2c0grp { fsl,pins = < IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021 @@ -1008,6 +1120,22 @@ >; }; + pinctrl_mipi_csi0: mipi-csi0grp { + fsl,pins = < + IMX8QM_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27 0xC0000041 + IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 0xC0000041 + IMX8QM_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041 + >; + }; + + pinctrl_mipi_csi1: mipi-csi1grp { + fsl,pins = < + IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 0xC0000041 + IMX8QM_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31 0xC0000041 + IMX8QM_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT 0xC0000041 + >; + }; + pinctrl_pciea: pcieagrp { fsl,pins = < IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28 0x04000021 diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi index 2bbdacb1313f..4b7e685daa02 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi @@ -3,6 +3,31 @@ * Copyright 2021 NXP */ +&isi { + compatible = "fsl,imx8qm-isi"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + + isi_in_2: endpoint { + remote-endpoint = <&mipi_csi0_out>; + }; + }; + + port@3 { + reg = <3>; + + isi_in_3: endpoint { + remote-endpoint = <&mipi_csi1_out>; + }; + }; + }; +}; + &jpegdec { compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; }; @@ -10,3 +35,57 @@ &jpegenc { compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc"; }; + +&mipi_csi_0 { + compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi0_out: endpoint { + remote-endpoint = <&isi_in_2>; + }; + }; + }; +}; + +&mipi_csi_1 { + compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi1_out: endpoint { + remote-endpoint = <&isi_in_3>; + }; + }; + }; +}; + +&pi0_ipg_lpcg { + status = "disabled"; +}; + +&pi0_misc_lpcg { + status = "disabled"; +}; + +&pi0_pxl_lpcg { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 6fa31bc9ece8..827e1365b5da 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -333,6 +333,11 @@ compatible = "fsl,imx8qm-iomuxc"; }; + scu_reset: reset-controller { + compatible = "fsl,imx-scu-reset"; + #reset-cells = <1>; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -356,6 +361,11 @@ compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; #thermal-sensor-cells = <1>; }; + + watchdog { + compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; thermal-zones { @@ -612,6 +622,7 @@ }; /* sorted in register address */ + #include "imx8-ss-security.dtsi" #include "imx8-ss-cm41.dtsi" #include "imx8-ss-audio.dtsi" #include "imx8-ss-vpu.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso new file mode 100644 index 000000000000..dd65ed8bb37c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 NXP + */ +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/media/video-interfaces.h> + +&i2c_mipi_csi0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c_mipi_csi0>; + pinctrl-names = "default"; + status = "okay"; + + ov5640_mipi: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&xtal24m>; + clock-names = "xclk"; + pinctrl-0 = <&pinctrl_mipi_csi0>; + pinctrl-names = "default"; + powerdown-gpios = <&lsio_gpio3 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&lsio_gpio3 8 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; + + port { + ov5640_mipi_ep: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi0_in>; + }; + }; + }; +}; + +&irqsteer_csi0 { + status = "okay"; +}; + +&isi { + status = "okay"; +}; + +&mipi_csi_0 { + status = "okay"; + + ports { + port@0 { + mipi_csi0_in: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&ov5640_mipi_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index c93d123670bd..e54be7f649ff 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -64,6 +64,92 @@ }; }; + i2c-mux { + compatible = "i2c-mux-gpio"; + mux-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */ + i2c-parent = <&cm40_i2c>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + wm8960: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + wm8962: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + DCVDD-supply = <®_audio_1v8>; + DBVDD-supply = <®_audio_1v8>; + AVDD-supply = <®_audio_1v8>; + CPVDD-supply = <®_audio_1v8>; + MICVDD-supply = <®_audio_3v3>; + PLLVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + }; + + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_2v8: regulator-2v8 { + compatible = "regulator-fixed"; + regulator-name = "2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + reg_pcieb: regulator-pcie { compatible = "regulator-fixed"; regulator-max-microvolt = <3300000>; @@ -187,6 +273,15 @@ no-map; }; + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0xc0000000 0 0x3c000000>; + size = <0 0x3c000000>; + linux,cma-default; + reusable; + }; + gpu_reserved: memory@880000000 { no-map; reg = <0x8 0x80000000 0 0x10000000>; @@ -248,6 +343,21 @@ "LINPUT1", "Mic Jack", "Mic Jack", "MICB"; }; + + sound-wm8962 { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8962>; + hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>; + audio-routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC", + "IN1R", "AMIC"; + }; }; &amix { @@ -427,29 +537,6 @@ sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; - wm8960: audio-codec@1a { - compatible = "wlf,wm8960"; - reg = <0x1a>; - clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; - clock-names = "mclk"; - assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, - <&mclkout0_lpcg IMX_LPCG_CLK_0>; - assigned-clock-rates = <786432000>, - <49152000>, - <12288000>, - <12288000>; - wlf,shared-lrclk; - wlf,hp-cfg = <2 2 3>; - wlf,gpio-cfg = <1 3>; - AVDD-supply = <®_audio_3v3>; - DBVDD-supply = <®_audio_1v8>; - DCVDD-supply = <®_audio_1v8>; - SPKVDD1-supply = <®_audio_5v>; - SPKVDD2-supply = <®_audio_5v>; - }; - pca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -780,6 +867,13 @@ >; }; + pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020 + IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020 + >; + }; + pinctrl_ioexp_rst: ioexprstgrp { fsl,pins = < IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 @@ -820,6 +914,14 @@ >; }; + pinctrl_mipi_csi0: mipi-csi0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07 0xC0000041 + IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08 0xC0000041 + IMX8QXP_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041 + >; + }; + pinctrl_pcieb: pcieagrp { fsl,pins = < IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x06000021 diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi index 3a087317591d..232cf25dadfc 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi @@ -4,6 +4,86 @@ * Dong Aisheng <aisheng.dong@nxp.com> */ +&csi1_pxl_lpcg { + status = "disabled"; +}; + +&csi1_core_lpcg { + status = "disabled"; +}; + +&csi1_esc_lpcg { + status = "disabled"; +}; + +&gpio0_mipi_csi1 { + status = "disabled"; +}; + +&i2c_mipi_csi1 { + status = "disabled"; +}; + +&irqsteer_csi1 { + status = "disabled"; +}; + +&isi { + compatible = "fsl,imx8qxp-isi"; + reg = <0x58100000 0x60000>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>, + <&pdma1_lpcg IMX_LPCG_CLK_0>, + <&pdma2_lpcg IMX_LPCG_CLK_0>, + <&pdma3_lpcg IMX_LPCG_CLK_0>, + <&pdma4_lpcg IMX_LPCG_CLK_0>, + <&pdma5_lpcg IMX_LPCG_CLK_0>; + clock-names = "per0", "per1", "per2", "per3", "per4", "per5"; + power-domains = <&pd IMX_SC_R_ISI_CH0>, + <&pd IMX_SC_R_ISI_CH1>, + <&pd IMX_SC_R_ISI_CH2>, + <&pd IMX_SC_R_ISI_CH3>, + <&pd IMX_SC_R_ISI_CH4>, + <&pd IMX_SC_R_ISI_CH5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + + isi_in_2: endpoint { + remote-endpoint = <&mipi_csi0_out>; + }; + }; + }; +}; + +&mipi_csi_0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi0_out: endpoint { + remote-endpoint = <&isi_in_2>; + }; + }; + }; +}; + &jpegdec { compatible = "nxp,imx8qxp-jpgdec"; }; @@ -11,3 +91,7 @@ &jpegenc { compatible = "nxp,imx8qxp-jpgenc"; }; + +&mipi_csi_1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi new file mode 100644 index 000000000000..15f1239dab24 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2025 Actia Nordic AB + */ + +&crypto { + compatible = "fsl,imx8qxp-caam", "fsl,sec-v4.0"; +}; + +&sec_jr2 { + compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring"; +}; + +&sec_jr3 { + compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 05138326f0a5..9e46e16a8dc0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -241,6 +241,11 @@ status = "disabled"; }; + scu_reset: reset-controller { + compatible = "fsl,imx-scu-reset"; + #reset-cells = <1>; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -321,6 +326,7 @@ /* sorted in register address */ #include "imx8-ss-img.dtsi" #include "imx8-ss-vpu.dtsi" + #include "imx8-ss-security.dtsi" #include "imx8-ss-cm40.dtsi" #include "imx8-ss-gpu0.dtsi" #include "imx8-ss-adma.dtsi" @@ -332,6 +338,7 @@ #include "imx8qxp-ss-img.dtsi" #include "imx8qxp-ss-vpu.dtsi" +#include "imx8qxp-ss-security.dtsi" #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 2562a35286c2..13b01f3aa2a4 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -686,6 +686,7 @@ <&pcc4 IMX8ULP_CLK_PCTLE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 32 24>; + ngpios = <24>; }; gpiof: gpio@2d010000 { @@ -701,6 +702,7 @@ <&pcc4 IMX8ULP_CLK_PCTLF>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 64 32>; + ngpios = <32>; }; per_bridge5: bus@2d800000 { @@ -855,6 +857,7 @@ <&pcc5 IMX8ULP_CLK_RGPIOD>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 0 24>; + ngpios = <24>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 8491eb53120e..e24e12f04526 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -95,6 +95,15 @@ gpio = <&adp5585 6 GPIO_ACTIVE_LOW>; }; + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -107,6 +116,28 @@ enable-active-high; }; + reg_usdhc3_vmmc: regulator-usdhc3 { + compatible = "regulator-fixed"; + regulator-name = "WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>; + /* + * IW612 wifi chip needs more delay than other wifi chips to complete + * the host interface initialization after power up, otherwise the + * internal state of IW612 may be unstable, resulting in the failure of + * the SDIO3.0 switch voltage. + */ + startup-delay-us = <20000>; + enable-active-high; + }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>; + }; + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&adp5585 0 100000 0>; @@ -217,10 +248,10 @@ ethphy1: ethernet-phy@1 { reg = <1>; - eee-broken-1000t; reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; + realtek,clkout-disable; }; }; }; @@ -245,6 +276,7 @@ reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; + realtek,clkout-disable; }; }; }; @@ -493,6 +525,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; }; &micfil { @@ -594,6 +630,21 @@ no-mmc; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_usdhc3_vmmc>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + &wdog3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -622,13 +673,13 @@ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e - MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e >; }; @@ -660,24 +711,17 @@ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e - MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e - MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e >; }; - pinctrl_lpi2c3: lpi2c3grp { - fsl,pins = < - MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e - MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e - >; - }; - pinctrl_fec_sleep: fecsleepgrp { fsl,pins = < MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e @@ -935,6 +979,59 @@ >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grpsleepgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e + MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e + >; + }; + + pinctrl_usdhc3_wlan: usdhc3wlangrp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts index f556b6569a68..c5d86b54ad33 100644 --- a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts @@ -99,6 +99,15 @@ enable-active-high; }; + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -111,6 +120,23 @@ off-on-delay-us = <12000>; }; + reg_usdhc3_vmmc: regulator-usdhc3 { + compatible = "regulator-fixed"; + regulator-name = "WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>; + /* + * IW612 wifi chip needs more delay than other wifi chips to complete + * the host interface initialization after power up, otherwise the + * internal state of IW612 may be unstable, resulting in the failure of + * the SDIO3.0 switch voltage. + */ + startup-delay-us = <20000>; + enable-active-high; + }; + reg_vdd_12v: regulator-vdd-12v { compatible = "regulator-fixed"; regulator-name = "reg_vdd_12v"; @@ -126,6 +152,11 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>; + }; }; &adc1 { @@ -366,6 +397,21 @@ status = "okay"; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_usdhc3_vmmc>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + &wdog3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -552,6 +598,59 @@ >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grpsleepgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e + MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e + >; + }; + + pinctrl_usdhc3_wlan: usdhc3wlangrp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts index 75e67115d52f..f6f8d105b737 100644 --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts @@ -82,6 +82,15 @@ enable-active-high; }; + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_rpi_3v3: regulator-rpi { compatible = "regulator-fixed"; regulator-name = "VDD_RPI_3V3"; @@ -103,6 +112,23 @@ off-on-delay-us = <12000>; }; + reg_usdhc3_vmmc: regulator-usdhc3 { + compatible = "regulator-fixed"; + regulator-name = "WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>; + /* + * IW612 wifi chip needs more delay than other wifi chips to complete + * the host interface initialization after power up, otherwise the + * internal state of IW612 may be unstable, resulting in the failure of + * the SDIO3.0 switch voltage. + */ + startup-delay-us = <20000>; + enable-active-high; + }; + sound-bt-sco { compatible = "simple-audio-card"; simple-audio-card,name = "bt-sco-audio"; @@ -151,6 +177,11 @@ "IN3R", "AMIC", "IN1R", "AMIC"; }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>; + }; }; &adc1 { @@ -184,7 +215,6 @@ ethphy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - eee-broken-1000t; reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; @@ -265,6 +295,11 @@ interrupt-parent = <&pcal6524>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; + + inertial-meter@6a { + compatible = "st,lsm6dso"; + reg = <0x6a>; + }; }; &lpi2c2 { @@ -380,6 +415,17 @@ status = "okay"; }; +&lpuart5 { + /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + &micfil { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pdm>; @@ -458,6 +504,20 @@ status = "okay"; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_usdhc3_vmmc>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + &wdog3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -650,6 +710,42 @@ >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso new file mode 100644 index 000000000000..7381b87444e8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser <primoz.fiser@norik.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx93-pinfunc.h" + +&{/} { + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; +}; + +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +/* + * NOTE: When uSDHC3 port is multiplexed on GPIO_IO[27:22] pads, it only + * supports 50 MHz mode, due to introduction of potential variations in + * trace impedance, drive strength, and timing skew. Refer to i.MX 93 + * Application Processors Data Sheet, Rev. 3, page 60 for more details. + */ +&usdhc3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>; + pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>; + mmc-pwrseq = <&usdhc3_pwrseq>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x179e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000178e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + pinctrl_usdhc3_sleep: usdhc3sleepgrp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x31e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x31e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x31e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x31e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x31e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x31e + >; + }; + + pinctrl_wlbt: wlbtgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e /* WAKE_DEV */ + MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e /* WAKE_HOST */ + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e /* PDn */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts index 7e9d031a2f0e..475913cf0cb9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts @@ -18,7 +18,6 @@ "fsl,imx93"; aliases { - ethernet0 = &fec; ethernet1 = &eqos; rtc0 = &i2c_rtc; rtc1 = &bbnsm_rtc; @@ -54,18 +53,10 @@ regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; }; - - reg_vref_1v8: regulator-adc-vref { - compatible = "regulator-fixed"; - regulator-name = "VREF_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; }; /* ADC */ &adc1 { - vref-supply = <®_vref_1v8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso new file mode 100644 index 000000000000..a20898734741 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Andrej Picej <andrej.picej@norik.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx93-pinfunc.h" + +&{/} { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + button-s2 { + label = "sleep"; + linux,code = <KEY_SLEEP>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>; + + user-led2 { + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e + >; + }; + + pinctrl_user_leds: userledsgrp { + fsl,pins = < + MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso new file mode 100644 index 000000000000..a7285f009566 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Andrej Picej <andrej.picej@norik.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx93-pinfunc.h" + +&{/} { + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <60>; + reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; +}; + +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + }; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>; + pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>; + mmc-pwrseq = <&usdhc3_pwrseq>; + bus-width = <4>; + non-removable; + no-1-8-v; + status = "okay"; + + brmcf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x179e + MX93_PAD_GPIO_IO23__USDHC3_CMD 0x4000139e + MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x4000139e + MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x4000139e + MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x4000139e + MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x4000139e + >; + }; + + pinctrl_usdhc3_sleep: usdhc3sleepgrp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x31e + MX93_PAD_GPIO_IO23__USDHC3_CMD 0x31e + MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x31e + MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x31e + MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x31e + MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x31e + >; + }; + + pinctrl_wlbt: wlbtgrp { + fsl,pins = < + MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e /* BT ENABLE */ + MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e /* WLAN ENABLE */ + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e /* HOST WAKEUP */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts index 0c55b749c834..6f1374f5757f 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts @@ -18,6 +18,7 @@ "fsl,imx93"; aliases { + ethernet1 = &eqos; rtc0 = &i2c_rtc; rtc1 = &bbnsm_rtc; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso new file mode 100644 index 000000000000..23bede7833f8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser <primoz.fiser@norik.com> + */ + +/dts-v1/; +/plugin/; + +&{/} { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + rsc_table: rsc-table@2021e000 { + reg = <0 0x2021e000 0 0x1000>; + no-map; + }; + + vdev0vring0: vdev0vring0@a4000000 { + reg = <0 0xa4000000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@a4008000 { + reg = <0 0xa4008000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@a4010000 { + reg = <0 0xa4010000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@a4018000 { + reg = <0 0xa4018000 0 0x8000>; + no-map; + }; + + vdevbuffer: vdevbuffer@a4020000 { + compatible = "shared-dma-pool"; + reg = <0 0xa4020000 0 0x100000>; + no-map; + }; + }; +}; + +&cm33 { + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&mu1 0 1>, + <&mu1 1 1>, + <&mu1 3 1>; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; + status = "okay"; +}; + +&mu1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi index 22dbcc89e311..c6f5aa38ebf9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi @@ -16,6 +16,10 @@ model = "PHYTEC phyCORE-i.MX93"; compatible = "phytec,imx93-phycore-som", "fsl,imx93"; + aliases { + ethernet0 = &fec; + }; + reserved-memory { ranges; #address-cells = <2>; @@ -42,6 +46,19 @@ linux,default-trigger = "heartbeat"; }; }; + + reg_vdda_1v8: regulator-vdda-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&buck5>; + }; +}; + +/* ADC */ +&adc1 { + vref-supply = <®_vdda_1v8>; }; /* Ethernet */ @@ -178,6 +195,9 @@ /* Watchdog */ &wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; status = "okay"; }; @@ -266,4 +286,10 @@ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi index 2cabdae24227..82914ca148d3 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* - * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>, + * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, * D-82229 Seefeld, Germany. * Author: Markus Niebel */ @@ -11,6 +11,12 @@ model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM"; compatible = "tq,imx93-tqma9352", "fsl,imx93"; + memory@80000000 { + device_type = "memory"; + /* our minimum RAM config will be 1024 MiB */ + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -70,15 +76,6 @@ }; }; -&gpio1 { - pmic-irq-hog { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - input; - line-name = "PMIC_IRQ#"; - }; -}; - &lpi2c1 { clock-frequency = <400000>; pinctrl-names = "default", "sleep"; @@ -110,11 +107,11 @@ regulator-ramp-delay = <3125>; }; - /* V_DDRQ - 1.1 LPDDR4 or 0.6 LPDDR4X */ + /* V_DDRQ - 0.6 V for LPDDR4X */ buck2: BUCK2 { regulator-name = "BUCK2"; regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <600000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi index 783938245e4f..a5f09487d803 100644 --- a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi @@ -19,26 +19,19 @@ reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ }; - - reg_eqos_phy: regulator-eqos-phy { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_eqos_phy>; - regulator-name = "eth_phy_pwr"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <100000>; - regulator-always-on; - }; }; &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ phy-mode = "rgmii"; phy-handle = <ðphy0>; + snps,clk-csr = <5>; status = "okay"; mdio { @@ -51,6 +44,28 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; eee-broken-1000t; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_YELLOW>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; }; }; }; @@ -75,14 +90,15 @@ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e - MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 64cd0776b43d..8a7f1cd76c76 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -297,7 +297,8 @@ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3 <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1 + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1 + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; // err clocks = <&clk IMX93_CLK_EDMA1_GATE>; clock-names = "dma"; }; @@ -667,7 +668,8 @@ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_EDMA2_GATE>; clock-names = "dma"; }; @@ -1197,6 +1199,7 @@ <&clk IMX93_CLK_GPIO2_GATE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 4 30>; + ngpios = <30>; }; gpio3: gpio@43820000 { @@ -1213,6 +1216,7 @@ clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>, <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; + ngpios = <32>; }; gpio4: gpio@43830000 { @@ -1228,6 +1232,7 @@ <&clk IMX93_CLK_GPIO4_GATE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; + ngpios = <30>; }; gpio1: gpio@47400000 { @@ -1243,6 +1248,7 @@ <&clk IMX93_CLK_GPIO1_GATE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 92 16>; + ngpios = <16>; }; ocotp: efuse@47510000 { diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi index 3661ea48d7d2..44dee2cbd42d 100644 --- a/arch/arm64/boot/dts/freescale/imx94.dtsi +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi @@ -108,6 +108,16 @@ }; }; + mqs1: mqs1 { + compatible = "fsl,imx943-aonmix-mqs"; + status = "disabled"; + }; + + mqs2: mqs2 { + compatible = "fsl,imx943-wakeupmix-mqs"; + status = "disabled"; + }; + pmu { compatible = "arm,cortex-a55-pmu"; interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; @@ -785,6 +795,7 @@ #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 4 32>; + ngpios = <32>; }; gpio3: gpio@43820000 { @@ -797,6 +808,7 @@ #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 36 26>; + ngpios = <26>; }; gpio4: gpio@43840000 { @@ -810,6 +822,7 @@ gpio-controller; gpio-ranges = <&scmi_iomuxc 0 62 4>, <&scmi_iomuxc 4 0 4>, <&scmi_iomuxc 8 140 12>, <&scmi_iomuxc 20 164 12>; + ngpios = <32>; }; gpio5: gpio@43850000 { @@ -822,6 +835,7 @@ #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 108 32>; + ngpios = <32>; }; gpio6: gpio@43860000 { @@ -834,6 +848,7 @@ #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 66 32>; + ngpios = <32>; }; gpio7: gpio@43870000 { @@ -846,6 +861,8 @@ #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 98 10>, <&scmi_iomuxc 16 152 12>; + gpio-reserved-ranges = <10 6>; + ngpios = <28>; }; aips1: bus@44000000 { @@ -1028,6 +1045,13 @@ compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan"; reg = <0x443a0000 0x10000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX94_CLK_BUSAON>, + <&scmi_clk IMX94_CLK_CAN1>; + clock-names = "ipg", "per"; + assigned-clocks = <&scmi_clk IMX94_CLK_CAN1>; + assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <80000000>; + fsl,clk-source = /bits/ 8 <0>; status = "disabled"; }; @@ -1045,6 +1069,26 @@ status = "disabled"; }; + micfil: micfil@44520000 { + compatible = "fsl,imx943-micfil"; + reg = <0x44520000 0x10000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX94_CLK_BUSAON>, + <&scmi_clk IMX94_CLK_PDM>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&dummy>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&edma1 6 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>; + dma-names = "rx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + adc1: adc@44530000 { compatible = "nxp,imx94-adc", "nxp,imx93-adc"; reg = <0x44530000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts index cc8f3e6a1789..c8c3eff9df1a 100644 --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts @@ -12,15 +12,28 @@ model = "NXP i.MX943 EVK board"; aliases { + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c5 = &lpi2c6; mmc0 = &usdhc1; mmc1 = &usdhc2; serial0 = &lpuart1; }; + bt_sco_codec: bt-sco-codec { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + chosen { stdout-path = &lpuart1; }; + dmic: dmic { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; off-on-delay-us = <12000>; @@ -33,6 +46,15 @@ enable-active-high; }; + reg_audio_pwr: regulator-wm8962-pwr { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "audio-pwr"; + gpio = <&pcal6416_i2c3_u171 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reserved-memory { ranges; #address-cells = <2>; @@ -47,19 +69,429 @@ }; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-inversion; + simple-audio-card,bitclock-master = <&btcpu>; + simple-audio-card,format = "dsp_a"; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,name = "bt-sco-audio"; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + + btcpu: simple-audio-card,cpu { + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + sound-dai = <&sai3>; + }; + }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + format = "i2s"; + link-name = "micfil hifi"; + + codec { + sound-dai = <&dmic>; + }; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-wm8962 { + compatible = "fsl,imx-audio-wm8962"; + audio-codec = <&wm8962>; + audio-cpu = <&sai1>; + audio-routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC", + "IN1R", "AMIC"; + hp-det-gpio = <&pcal6416_i2c3_u48 14 GPIO_ACTIVE_HIGH>; + model = "wm8962-audio"; + }; + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; device_type = "memory"; }; }; +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-names = "default"; + status = "okay"; + + pca9670_i2c3: gpio@23 { + compatible = "nxp,pca9670"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + }; + + pca9548_i2c3: i2c-mux@77 { + compatible = "nxp,pca9548"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + wm8962: codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&scmi_clk IMX94_CLK_SAI1>; + AVDD-supply = <®_audio_pwr>; + CPVDD-supply = <®_audio_pwr>; + DBVDD-supply = <®_audio_pwr>; + DCVDD-supply = <®_audio_pwr>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + MICVDD-supply = <®_audio_pwr>; + PLLVDD-supply = <®_audio_pwr>; + SPKVDD1-supply = <®_audio_pwr>; + SPKVDD2-supply = <®_audio_pwr>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c3_u46: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + + sd-card-on-hog { + gpios = <13 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + }; + + pcal6416_i2c3_u171: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + + audio-pwren-hog { + gpios = <12 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + + mqs-mic-sel-hog { + gpios = <11 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-low; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c3_u48: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + pinctrl-0 = <&pinctrl_ioexpander_int>; + pinctrl-names = "default"; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6408_i2c3_u172: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio3>; + /* shared int pin with u48 */ + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; +}; + +&lpi2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lpi2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c6>; + pinctrl-names = "default"; + status = "okay"; + + pca9544_i2c6: i2c-mux@77 { + compatible = "nxp,pca9544"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c6_u50: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6408_i2c6_u170: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + pinctrl-0 = <&pinctrl_ioexpander_int2>; + pinctrl-names = "default"; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c6_u44: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + + /* pdm selection */ + can-pdm-sel-hog { + gpios = <12 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-low; + }; + + sai3-sel-hog { + gpios = <11 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + + /* eMMC IOMUX selection */ + sd1-sel-hog { + gpios = <0 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + + /* SD card IOMUX selection */ + sd2-sel-hog { + gpios = <1 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + }; + }; + }; +}; + &lpuart1 { pinctrl-0 = <&pinctrl_uart1>; pinctrl-names = "default"; status = "okay"; }; +&micfil { + assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&scmi_clk IMX94_CLK_PDM>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <49152000>; + pinctrl-0 = <&pinctrl_pdm>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sai1 { + assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&scmi_clk IMX94_CLK_SAI1>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + pinctrl-0 = <&pinctrl_sai1>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&scmi_clk IMX94_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + pinctrl-0 = <&pinctrl_sai3>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &scmi_iomuxc { + + pinctrl_ioexpander_int2: ioexpanderint2grp { + fsl,pins = < + IMX94_PAD_CCM_CLKO4__GPIO4_IO3 0x31e + >; + }; + + pinctrl_ioexpander_int: ioexpanderintgrp { + fsl,pins = < + IMX94_PAD_GPIO_IO45__GPIO3_IO13 0x31e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX94_PAD_GPIO_IO16__LPI2C3_SDA 0x40000b9e + IMX94_PAD_GPIO_IO17__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = < + IMX94_PAD_GPIO_IO18__LPI2C4_SDA 0x40000b9e + IMX94_PAD_GPIO_IO19__LPI2C4_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c6: lpi2c6grp { + fsl,pins = < + IMX94_PAD_GPIO_IO29__LPI2C6_SDA 0x40000b9e + IMX94_PAD_GPIO_IO28__LPI2C6_SCL 0x40000b9e + >; + }; + + pinctrl_pdm: pdmgrp { + fsl,pins = < + IMX94_PAD_PDM_CLK__PDM_CLK 0x31e + IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x31e + IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x31e + IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x31e + IMX94_PAD_I2C2_SDA__SAI1_MCLK 0x31e + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK 0x31e + IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC 0x31e + IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0 0x31e + IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0 0x31e + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < IMX94_PAD_UART1_TXD__LPUART1_TX 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts index 9f4d0899a94d..46f6e0fbf2b0 100644 --- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts @@ -494,6 +494,14 @@ <0x60 &its 0x66 0x1>, //ENETC1 VF1 <0x80 &its 0x64 0x1>, //ENETC2 PF <0xc0 &its 0x67 0x1>; + iommu-map = <0x0 &smmu 0x20 0x1>, + <0x10 &smmu 0x21 0x1>, + <0x20 &smmu 0x22 0x1>, + <0x40 &smmu 0x23 0x1>, + <0x50 &smmu 0x25 0x1>, + <0x60 &smmu 0x26 0x1>, + <0x80 &smmu 0x24 0x1>, + <0xc0 &smmu 0x27 0x1>; }; &netc_emdio { @@ -1070,7 +1078,10 @@ &usb3_phy { orientation-switch; + fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>; + fsl,phy-pcs-tx-swing-full-percent = <100>; fsl,phy-tx-preemp-amp-tune-microamp = <600>; + fsl,phy-tx-vboost-level-microvolt = <1156>; status = "okay"; port { diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts index d7d845231312..2f949a0d48d2 100644 --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -77,6 +77,29 @@ }; }; + flexcan1_phy: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + max-bitrate = <1000000>; + enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>; + standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_HIGH>; + }; + + flexcan2_phy: can-phy1 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + max-bitrate = <1000000>; + enable-gpios = <&i2c6_pcal6416 4 GPIO_ACTIVE_HIGH>; + standby-gpios = <&i2c6_pcal6416 3 GPIO_ACTIVE_HIGH>; + }; + + reg_vref_1v8: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-max-microvolt = <3300000>; @@ -204,6 +227,11 @@ }; }; +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + &enetc_port0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enetc0>; @@ -212,6 +240,20 @@ status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + phys = <&flexcan1_phy>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + phys = <&flexcan2_phy>; + status = "okay"; +}; + &flexspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi1>; @@ -231,6 +273,37 @@ }; }; +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; + + adp5585: io-expander@34 { + compatible = "adi,adp5585-00", "adi,adp5585"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <5 1>; + #pwm-cells = <3>; + }; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; + + i2c3_gpio_expander_20: gpio@20 { + compatible = "nxp,pcal6408"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x20>; + vcc-supply = <®_3p3v>; + }; +}; + &lpi2c4 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -378,6 +451,24 @@ status = "okay"; }; +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "disabled"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&lpspi7 { + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi7>; + cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &micfil { #sound-dai-cells = <0>; pinctrl-names = "default"; @@ -414,10 +505,17 @@ ethphy0: ethernet-phy@1 { reg = <1>; + reset-gpios = <&i2c5_pcal6408 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; realtek,clkout-disable; }; }; +&netc_timer { + status = "okay"; +}; + &pcie0 { pinctrl-0 = <&pinctrl_pcie0>; pinctrl-names = "default"; @@ -484,6 +582,12 @@ status = "okay"; }; +&tpm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm3>; + status = "okay"; +}; + &usb2 { dr_mode = "host"; disable-over-current; @@ -514,7 +618,10 @@ }; &usb3_phy { + fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>; + fsl,phy-pcs-tx-swing-full-percent = <100>; fsl,phy-tx-preemp-amp-tune-microamp = <600>; + fsl,phy-tx-vboost-level-microvolt = <1156>; orientation-switch; status = "okay"; @@ -588,6 +695,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x39e + IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x39e + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + IMX95_PAD_GPIO_IO25__CAN2_TX 0x39e + IMX95_PAD_GPIO_IO27__CAN2_RX 0x39e + >; + }; + pinctrl_flexspi1: flexspi1grp { fsl,pins = < IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe @@ -628,6 +749,27 @@ >; }; + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e + IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e + IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO00__LPI2C3_SDA 0x40000b9e + IMX95_PAD_GPIO_IO01__LPI2C3_SCL 0x40000b9e + >; + }; + pinctrl_lpi2c4: lpi2c4grp { fsl,pins = < IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e @@ -656,6 +798,15 @@ >; }; + pinctrl_lpspi7: lpspi7grp { + fsl,pins = < + IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4 0x3fe + IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x3fe + IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x3fe + IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x3fe + >; + }; + pinctrl_pcie0: pcie0grp { fsl,pins = < IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e @@ -716,6 +867,12 @@ >; }; + pinctrl_tpm3: tpm3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO12__TPM3_CH2 0x51e + >; + }; + pinctrl_tpm6: tpm6grp { fsl,pins = < IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e @@ -729,6 +886,15 @@ >; }; + pinctrl_uart5: uart5grp { + fsl,pins = < + IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + IMX95_PAD_DAP_TDI__LPUART5_RX 0x31e + IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e @@ -821,12 +987,12 @@ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe - IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe - IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe - IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe - IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe - IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts new file mode 100644 index 000000000000..26c2df9b1b60 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/pwm/pwm.h> + +#include "imx95-phycore-fpsc.dtsi" + +/ { + compatible = "phytec,imx95-libra-rdk-fpsc", + "phytec,imx95-phycore-fpsc", "fsl,imx95"; + model = "PHYTEC Libra i.MX95 RDK FPSC"; + + aliases { + can1 = &flexcan2; + can2 = &flexcan1; + ethernet0 = &enetc_port0; + serial0 = &lpuart7; + serial1 = &lpuart8; + }; + + chosen { + stdout-path = &lpuart7; + }; + + backlight_lvds0: backlight0 { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_lvds0>; + power-supply = <®_vdd_12v0>; + status = "disabled"; + }; + + transceiver1: can-phy { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + enable-gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>; + }; + + transceiver2: can-phy { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + enable-gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>; + }; + + panel0_lvds: panel-lvds0 { + backlight = <&backlight_lvds0>; + power-supply = <®_vdd_3v3>; + status = "disabled"; + }; + + reg_vdd_12v0: regulator-vdd-12v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "VDD_12V0"; + }; + + reg_vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VDD_1V8"; + }; + + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3"; + }; + + reg_vdd_5v0: regulator-vdd-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VDD_5V0"; + }; +}; + +&enetc_port0 { + phy-handle = <ðphy0>; + status = "okay"; +}; + +&enetc_port2 { + managed = "in-band-status"; + phy-handle = <ðphy2>; + phy-mode = "10gbase-r"; +}; + +/* CAN FD */ +&flexcan1 { + phys = <&transceiver1>; + status = "okay"; +}; + +&flexcan2 { + phys = <&transceiver2>; + status = "okay"; +}; + +/* SPI-NOR */ +&flexspi1 { + pinctrl-0 = <&pinctrl_flexspi>; + pinctrl-names = "default"; + status = "okay"; + + spi_nor: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <166000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + vcc-supply = <®_vdd_1v8>; + }; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "RGMII2_nINT", "GPIO4", "RTC_INT", "", + "LVDS1_BL_EN"; +}; + +&lpi2c1 { + temperature-sensor@4f { + compatible = "nxp,p3t1755"; + reg = <0x4f>; + vs-supply = <®_vdd_1v8>; + }; +}; + +&lpi2c3 { + status = "okay"; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-1 { + type = <PCA9532_TYPE_LED>; + }; + + led-2 { + type = <PCA9532_TYPE_LED>; + }; + + led-3 { + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +&lpi2c4 { + status = "okay"; + + gpio_expander: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3", + "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2", + "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV", + "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE", + "PCIE2_nWAKE", "PCIE2_nALERT_3V3", + "UART1_BT_RS_SEL", "UART1_RS232_485_SEL"; + vcc-supply = <®_vdd_1v8>; + + uart1_bt_rs_sel: bt-rs-hog { + gpios = <14 GPIO_ACTIVE_HIGH>; + gpio-hog; + line-name = "UART1_BT_RS_SEL"; + output-low; + }; + }; +}; + +&lpi2c5 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + vcc-supply = <®_vdd_1v8>; + }; +}; + +/* Used for M33 debug */ +&lpuart2 { + pinctrl-0 = <&pinctrl_lpuart2>; + pinctrl-names = "default"; +}; + +/* A-55 debug UART */ +&lpuart7 { + status = "okay"; +}; + +/* RS232/RS485/BT */ +&lpuart8 { + uart-has-rtscts; + status = "okay"; +}; + +&netc_emdio { /* RGMII2 */ + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; + + ethphy2: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + max-speed = <10000>; /* 10Gbit/s */ + status = "disabled"; + }; +}; + +&pcie0 { + reset-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vdd_3v3>; + status = "okay"; +}; + +&pcie1 { + reset-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vdd_3v3>; + status = "okay"; +}; + +&rv3028 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + aux-voltage-chargeable = <1>; + wakeup-source; + trickle-resistor-ohms = <3000>; +}; + +&scmi_iomuxc { + pinctrl_lpuart2: lpuart2grp { /* FPSC proprietary */ + fsl,pins = < + IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x31e + IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x31e + >; + }; + + pinctrl_lvds0: lvds0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20 0x31e + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e + >; + }; + + pinctrl_tpm4: tpm4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO21__TPM4_CH1 0x51e + >; + }; +}; + +&tpm4 { + pinctrl-0 = <&pinctrl_tpm4>; + pinctrl-names = "default"; +}; + +&usb3 { + fsl,over-current-active-low; + fsl,power-active-low; + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb3_phy { + vbus-supply = <®_vdd_5v0>; + status = "okay"; +}; + +/* uSD Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi new file mode 100644 index 000000000000..7519d5bd06ba --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi @@ -0,0 +1,656 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 PHYTEC Messtechnik GmbH + */ + +#include <dt-bindings/net/ti-dp83867.h> +#include "imx95.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX95 FPSC"; + compatible = "phytec,imx95-phycore-fpsc", "fsl,imx95"; + + aliases { + ethernet1 = &enetc_port1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c5; + i2c3 = &lpi2c3; + i2c4 = &lpi2c4; + i2c5 = &lpi2c1; + rtc0 = &rv3028; + rtc1 = &scmi_bbm; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000001 0x00000000>; + }; + + reg_nvcc_aon: regulator-nvcc-aon { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VDD_IO"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + off-on-delay-us = <12000>; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDDSW_SD2"; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x7f000000>; + reusable; + size = <0 0x3c000000>; + linux,cma-default; + }; + }; +}; + +&enetc_port0 { /* FPSC RGMII2 */ + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_enetc0>; + pinctrl-names = "default"; +}; + +&enetc_port1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_enetc1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&flexcan1 { /* FPSC CAN1 */ + pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default"; +}; + +&flexcan2 { /* FPSC CAN2 */ + pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default"; +}; + +&flexspi1 { /* FPSC QSPI */ + pinctrl-0 = <&pinctrl_flexspi>; + pinctrl-names = "default"; +}; + +&gpio1 { /* FPSC GPIO */ + gpio-line-names = "", "", "", "", "GPIO2", + "GPIO1", "", "", "", "", + "PCIE1_nPERST", "USB1_PWR_EN", "GPIO3", "USB2_PWR_EN", "PCIE2_nPERST"; + pinctrl-0 = <&pinctrl_gpio1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpio2 { /* FPSC GPIO */ + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "RGMII2_nINT", "GPIO4"; + pinctrl-0 = <&pinctrl_gpio2>; + pinctrl-names = "default"; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", "", + "", "", "SD2_RESET_B"; +}; + +&gpio4 { + gpio-line-names = "ENET2_nINT"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "USB1_OC", "USB2_OC"; +}; + +&lpi2c1 { /* FPSC I2C5 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-names = "default"; + status = "okay"; + + dram_sense: temperature-sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + #thermal-sensor-cells = <1>; + }; + + emmc_sense: temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + #thermal-sensor-cells = <1>; + }; + + ethphy_sense: temperature-sensor@4a { + compatible = "ti,tmp102"; + reg = <0x4a>; + #thermal-sensor-cells = <1>; + }; + + pmic_sense: temperature-sensor@4b { + compatible = "ti,tmp102"; + reg = <0x4b>; + #thermal-sensor-cells = <1>; + }; + + /* User EEPROM */ + eeprom@50 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <®_nvcc_aon>; + }; + + /* Factory EEPROM */ + eeprom@51 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + vcc-supply = <®_nvcc_aon>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; + + /* User EEPROM ID page */ + eeprom@58 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + vcc-supply = <®_nvcc_aon>; + }; +}; + +&lpi2c2 { /* FPSC I2C1 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-names = "default"; +}; + +&lpi2c3 { /* FPSC I2C3 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-names = "default"; +}; + +&lpi2c4 { /* FPSC I2C4 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c4>; + pinctrl-names = "default"; +}; + +&lpi2c5 { /* FPSC I2C2 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-names = "default"; +}; + +&lpspi3 { /* FPSC SPI2 */ + pinctrl-0 = <&pinctrl_lpspi3>; + pinctrl-names = "default"; +}; + +&lpspi4 { /* FPSC SPI3 */ + pinctrl-0 = <&pinctrl_lpspi4>; + pinctrl-names = "default"; +}; + +&lpspi7 { /* FPSC SPI1 */ + pinctrl-0 = <&pinctrl_lpspi7>; + pinctrl-names = "default"; +}; + +&lpuart5 { /* FPSC UART2 */ + pinctrl-0 = <&pinctrl_lpuart5>; + pinctrl-names = "default"; +}; + +&lpuart7 { /* FPSC UART3 */ + pinctrl-0 = <&pinctrl_lpuart7>; + pinctrl-names = "default"; +}; + +&lpuart8 { /* FPSC UART1 */ + pinctrl-0 = <&pinctrl_lpuart8>; + pinctrl-names = "default"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_emdio { /* FPSC RGMII2 */ + pinctrl-0 = <&pinctrl_emdio>; + pinctrl-names = "default"; + status = "okay"; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio4>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&pcie0 { /* FPSC PCIE1 */ + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; +}; + +&pcie1 { /* FPSC PCIE2 */ + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; +}; + +&sai5 { /* FPSC SAI1 */ + pinctrl-0 = <&pinctrl_sai5>; + pintrc-names = "default"; +}; + +&scmi_iomuxc { + pinctrl_emdio: emdiogrp { + fsl,pins = < + IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e /* RGMII2_MDIO */ + IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x502 /* RGMII2_MDC */ + >; + }; + + pinctrl_enetc0: enetc0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16 0x31e /* RGMII2_nINT */ + IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2 0x31e /* RGMII2_EVENT_IN */ + IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2 0x31e /* RGMII2_EVENT_OUT */ + + IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e /* RGMII2_TX_3 */ + IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e /* RGMII2_TX_2 */ + IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e /* RGMII2_TX_1 */ + IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e /* RGMII2_TX_0 */ + IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e /* RGMII2_TX_CTL */ + IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e /* RGMII2_TXC */ + IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e /* RGMII2_RX_3 */ + IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e /* RGMII2_RX_2 */ + IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e /* RGMII2_RX_1 */ + IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e /* RGMII2_RX_0 */ + IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e /* RGMII2_RX_CTL */ + IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e /* RGMII2_RXC */ + >; + }; + + pinctrl_enetc1: enetc1grp { + fsl,pins = < + IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0 0x31e + IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x57e + IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x57e + IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x57e + IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x57e + IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e + IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e + IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e + IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e + IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e + IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e + IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e + IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x51e /* CAN1_TX */ + IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x51e /* CAN1_RX */ + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + IMX95_PAD_GPIO_IO25__CAN2_TX 0x51e /* CAN2_TX */ + IMX95_PAD_GPIO_IO27__CAN2_RX 0x51e /* CAN2_RX */ + >; + }; + + pinctrl_flexspi: flexspigrp { + fsl,pins = < + IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe /* QSPI_CE */ + IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe /* QSPI_CLK */ + IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe /* QSPI_DATA_0 */ + IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe /* QSPI_DATA_1 */ + IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe /* QSPI_DATA_2 */ + IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe /* QSPI_DATA_3 */ + IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe /* QSPI_DQS */ + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5 0x31e /* GPIO1 */ + IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4 0x31e /* GPIO2 */ + IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12 0x31e /* GPIO3 */ + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17 0x31e /* GPIO4 */ + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e /* I2C5_SCL */ + IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e /* I2C5_SDA */ + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e /* I2C1_SDA_DNU */ + IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e /* I2C1_SCL_DNU */ + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e /* I2C3_SDA */ + IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e /* I2C3_SCL */ + >; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e /* I2C4_SDA */ + IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e /* I2C4_SDL */ + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e /* I2C2_SDA */ + IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e /* I2C2_SCL */ + >; + }; + + pinctrl_lpspi3: lpspi3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO11__LPSPI3_SCK 0x51e /* SPI2_SCLK */ + IMX95_PAD_GPIO_IO10__LPSPI3_SOUT 0x51e /* SPI2_MOSI */ + IMX95_PAD_GPIO_IO09__LPSPI3_SIN 0x51e /* SPI2_MISO */ + IMX95_PAD_GPIO_IO08__LPSPI3_PCS0 0x51e /* SPI2_CS */ + >; + }; + + pinctrl_lpspi4: lpspi4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO21__LPSPI4_SCK 0x51e /* SPI3_SCLK */ + IMX95_PAD_GPIO_IO20__LPSPI4_SOUT 0x51e /* SPI3_MOSI */ + IMX95_PAD_GPIO_IO19__LPSPI4_SIN 0x51e /* SPI3_MISO */ + IMX95_PAD_GPIO_IO18__LPSPI4_PCS0 0x51e /* SPI3_CS */ + >; + }; + + pinctrl_lpspi7: lpspi7grp { + fsl,pins = < + IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x51e /* SPI1_SCLK */ + IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x51e /* SPI1_MOSI */ + IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x51e /* SPI1_MISO */ + IMX95_PAD_GPIO_IO04__LPSPI7_PCS0 0x51e /* SPI1_CS */ + >; + }; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = < + IMX95_PAD_GPIO_IO01__LPUART5_RX 0x51e /* UART2_RXD */ + IMX95_PAD_GPIO_IO00__LPUART5_TX 0x51e /* UART2_TXD */ + IMX95_PAD_GPIO_IO03__LPUART5_RTS_B 0x51e /* UART2_RTS */ + IMX95_PAD_GPIO_IO02__LPUART5_CTS_B 0x51e /* UART2_CTS */ + >; + }; + + pinctrl_lpuart7: lpuart7grp { + fsl,pins = < + IMX95_PAD_GPIO_IO37__LPUART7_RX 0x31e /* UART3_RXD */ + IMX95_PAD_GPIO_IO36__LPUART7_TX 0x31e /* UART3_TXD */ + >; + }; + + pinctrl_lpuart8: lpuart8grp { + fsl,pins = < + IMX95_PAD_GPIO_IO13__LPUART8_RX 0x51e /* UART1_RXD */ + IMX95_PAD_GPIO_IO12__LPUART8_TX 0x51e /* UART1_TXD */ + IMX95_PAD_GPIO_IO15__LPUART8_RTS_B 0x51e /* UART1_RTS */ + IMX95_PAD_GPIO_IO14__LPUART8_CTS_B 0x51e /* UART1_CTS */ + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x31e /* PCIE1_nCLKREQ */ + IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10 0x31e /* PCIE1_nPERST */ + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x31e /* PCIE2_nCLKREQ */ + IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14 0x31e /* PCIE2_nPERST */ + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e + >; + }; + + pinctrl_sai5: sai5grp { + fsl,pins = < + IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC 0x51e /* SAI1_RX_SYNC */ + IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK 0x51e /* SAI1_RX_BCLK */ + IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x51e /* SAI1_RX_DATA */ + IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x51e /* SAI1_TX_SYNC */ + IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x51e /* SAI1_TX_BCLK */ + IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x51e /* SAI1_TX_DATA */ + >; + }; + + pinctrl_tpm3: tpm3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO24__TPM3_CH3 0x51e /* PWM1 */ + >; + }; + + pinctrl_tpm5: tpm5grp { + fsl,pins = < + IMX95_PAD_GPIO_IO26__TPM5_CH3 0x51e /* PWM2 */ + >; + }; + + pinctrl_usbc: usbcgrp { + fsl,pins = < + IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11 0x51e /* USB1_PWR_EN */ + IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x51e /* USB1_OC */ + >; + }; + + pinctrl_usb2: usb2grp { + fsl,pins = < + IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13 0x51e /* USB2_PWR_EN */ + IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x51e /* USB2_OC */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */ + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e /* CLK */ + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e /* CMD */ + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e /* DATA0 */ + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e /* DATA1 */ + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e /* DATA2 */ + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e /* DATA3 */ + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */ + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e /* CLK */ + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e /* CMD */ + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e /* DATA0 */ + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e /* DATA1 */ + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e /* DATA2 */ + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e /* DATA3 */ + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */ + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe /* CLK */ + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe /* CMD */ + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe /* DATA0 */ + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe /* DATA1 */ + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe /* DATA2 */ + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe /* DATA3 */ + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_CLK */ + IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e /* SDIO_CMD */ + IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e /* SDIO_DATA0 */ + IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e /* SDIO_DATA1 */ + IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e /* SDIO_DATA2 */ + IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e /* SDIO_DATA3 */ + >; + }; +}; + +&tpm3 { /* FPSC PWM1 */ + pinctrl-0 = <&pinctrl_tpm3>; + pinctrl-names = "default"; +}; + +&tpm5 { /* FPSC PWM2 */ + pinctrl-0 = <&pinctrl_tpm5>; + pinctrl-names = "default"; +}; + +&usb3 { /* FPSC USB1 */ + pinctrl-0 = <&pinctrl_usbc>; + pinctrl-names = "default"; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + status = "okay"; +}; + +&usdhc2 { /* FPSC SDCARD */ + bus-width = <4>; + disable-wp; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + sd-uhs-sdr104; + vmmc-supply = <®_usdhc2_vmmc>; +}; + +&usdhc3 { /* FPSC SDIO */ + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 5aecdd9b62ff..4ca6a7ea586e 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -3,6 +3,7 @@ * Copyright 2024 NXP */ +#include <dt-bindings/clock/nxp,imx95-clock.h> #include <dt-bindings/dma/fsl-edma.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -688,15 +689,14 @@ }; i3c2: i3c@42520000 { - compatible = "silvaco,i3c-master-v1"; + compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1"; reg = <0x42520000 0x10000>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <3>; #size-cells = <0>; clocks = <&scmi_clk IMX95_CLK_BUSAON>, - <&scmi_clk IMX95_CLK_I3C2>, <&scmi_clk IMX95_CLK_I3C2SLOW>; - clock-names = "pclk", "fast_clk", "slow_clk"; + clock-names = "pclk", "fast_clk"; status = "disabled"; }; @@ -1152,6 +1152,7 @@ <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 4 32>; + ngpios = <32>; }; gpio3: gpio@43820000 { @@ -1168,6 +1169,7 @@ clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>, <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>; + ngpios = <32>; }; gpio4: gpio@43840000 { @@ -1183,6 +1185,7 @@ <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>; + ngpios = <30>; }; gpio5: gpio@43850000 { @@ -1198,6 +1201,7 @@ <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>; + ngpios = <18>; }; aips1: bus@44000000 { @@ -1273,15 +1277,14 @@ }; i3c1: i3c@44330000 { - compatible = "silvaco,i3c-master-v1"; + compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1"; reg = <0x44330000 0x10000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <3>; #size-cells = <0>; clocks = <&scmi_clk IMX95_CLK_BUSAON>, - <&scmi_clk IMX95_CLK_I3C1>, <&scmi_clk IMX95_CLK_I3C1SLOW>; - clock-names = "pclk", "fast_clk", "slow_clk"; + clock-names = "pclk", "fast_clk"; status = "disabled"; }; @@ -1508,6 +1511,7 @@ <&scmi_clk IMX95_CLK_M33>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 112 16>; + ngpios = <16>; status = "disabled"; }; @@ -1801,6 +1805,49 @@ status = "disabled"; }; + vpu_blk_ctrl: clock-controller@4c410000 { + compatible = "nxp,imx95-vpu-csr", "syscon"; + reg = <0x0 0x4c410000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&scmi_clk IMX95_CLK_VPUAPB>; + power-domains = <&scmi_devpd IMX95_PD_VPU>; + assigned-clocks = <&scmi_clk IMX95_CLK_VPUAPB>, + <&scmi_clk IMX95_CLK_VPU>, + <&scmi_clk IMX95_CLK_VPUJPEG>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>; + assigned-clock-rates = <133333333>, <667000000>, <500000000>; + }; + + jpegdec: jpegdec@4c500000 { + compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec"; + reg = <0x0 0x4C500000 0x0 0x00050000>; + interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_VPU>, + <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>; + assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>; + power-domains = <&scmi_devpd IMX95_PD_VPU>; + }; + + jpegenc: jpegenc@4c550000 { + compatible = "nxp,imx95-jpgenc", "nxp,imx8qxp-jpgenc"; + reg = <0x0 0x4C550000 0x0 0x00050000>; + interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk IMX95_CLK_VPU>, + <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>; + assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>; + power-domains = <&scmi_devpd IMX95_PD_VPU>; + }; + netcmix_blk_ctrl: syscon@4c810000 { compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon"; reg = <0x0 0x4c810000 0x0 0x8>; @@ -1861,6 +1908,14 @@ <0x90 &its 0x65 0x1>, //ENETC2 VF0 <0xa0 &its 0x66 0x1>, //ENETC2 VF1 <0xc0 &its 0x67 0x1>; //NETC Timer + iommu-map = <0x0 &smmu 0x20 0x1>, + <0x10 &smmu 0x21 0x1>, + <0x20 &smmu 0x22 0x1>, + <0x40 &smmu 0x23 0x1>, + <0x80 &smmu 0x24 0x1>, + <0x90 &smmu 0x25 0x1>, + <0xa0 &smmu 0x26 0x1>, + <0xc0 &smmu 0x27 0x1>; /* ENETC0~2 and Timer BAR0 - non-prefetchable memory */ ranges = <0x82000000 0x0 0x4cc00000 0x0 0x4cc00000 0x0 0xe0000 /* Timer BAR2 - prefetchable memory */ diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 7ee1228a50f4..79daba930ad6 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -136,7 +136,7 @@ regulator-max-microvolt = <3300000>; }; - sound { + sound: sound { compatible = "fsl,imx-audio-tlv320aic32x4"; model = "tqm-tlv320aic32"; ssi-controller = <&sai3>; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index ea1456d361a3..09d2fbbe1d8c 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -114,6 +114,14 @@ #size-cells = <1>; ranges = <0 0 0 0x80000000>; + rtc0: rtc@40060000 { + compatible = "nxp,s32g2-rtc"; + reg = <0x40060000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 54>, <&clks 55>; + clock-names = "ipg", "source0"; + }; + pinctrl: pinctrl@4009c240 { compatible = "nxp,s32g2-siul2-pinctrl"; /* MSCR0-MSCR101 registers on siul2_0 */ @@ -376,6 +384,68 @@ status = "disabled"; }; + usbmisc: usbmisc@44064200 { + #index-cells = <1>; + compatible = "nxp,s32g2-usbmisc"; + reg = <0x44064200 0x200>; + }; + + usbotg: usb@44064000 { + compatible = "nxp,s32g2-usb"; + reg = <0x44064000 0x200>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */ + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */ + clocks = <&clks 94>, <&clks 95>; + fsl,usbmisc = <&usbmisc 0>; + ahb-burst-config = <0x3>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + phy_type = "ulpi"; + dr_mode = "host"; + maximum-speed = "high-speed"; + status = "disabled"; + }; + + spi0: spi@401d4000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x401d4000 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <8>; + bus-num = <0>; + dmas = <&edma0 0 7>, <&edma0 0 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@401d8000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x401d8000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <1>; + dmas = <&edma0 0 10>, <&edma0 0 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@401dc000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x401dc000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <2>; + dmas = <&edma0 0 13>, <&edma0 0 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c0: i2c@401e4000 { compatible = "nxp,s32g2-i2c"; reg = <0x401e4000 0x1000>; @@ -460,6 +530,45 @@ status = "disabled"; }; + spi3: spi@402c8000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x402c8000 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <3>; + dmas = <&edma0 1 7>, <&edma0 1 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@402cc000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x402cc000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <4>; + dmas = <&edma0 1 10>, <&edma0 1 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@402d0000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x402d0000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <5>; + dmas = <&edma0 1 13>, <&edma0 1 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c3: i2c@402d8000 { compatible = "nxp,s32g2-i2c"; reg = <0x402d8000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi index 991dbfbfa203..39effbe8217c 100644 --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -171,6 +171,15 @@ #size-cells = <1>; ranges = <0 0 0 0x80000000>; + rtc0: rtc@40060000 { + compatible = "nxp,s32g3-rtc", + "nxp,s32g2-rtc"; + reg = <0x40060000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 54>, <&clks 55>; + clock-names = "ipg", "source0"; + }; + pinctrl: pinctrl@4009c240 { compatible = "nxp,s32g2-siul2-pinctrl"; /* MSCR0-MSCR101 registers on siul2_0 */ @@ -435,6 +444,68 @@ status = "disabled"; }; + usbmisc: usbmisc@44064200 { + #index-cells = <1>; + compatible = "nxp,s32g3-usbmisc"; + reg = <0x44064200 0x200>; + }; + + usbotg: usb@44064000 { + compatible = "nxp,s32g3-usb", "nxp,s32g2-usb"; + reg = <0x44064000 0x200>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */ + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */ + clocks = <&clks 94>, <&clks 95>; + fsl,usbmisc = <&usbmisc 0>; + ahb-burst-config = <0x3>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + phy_type = "ulpi"; + dr_mode = "host"; + maximum-speed = "high-speed"; + status = "disabled"; + }; + + spi0: spi@401d4000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x401d4000 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <8>; + bus-num = <0>; + dmas = <&edma0 0 7>, <&edma0 0 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@401d8000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x401d8000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <1>; + dmas = <&edma0 0 10>, <&edma0 0 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@401dc000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x401dc000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <2>; + dmas = <&edma0 0 13>, <&edma0 0 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c0: i2c@401e4000 { compatible = "nxp,s32g3-i2c", "nxp,s32g2-i2c"; @@ -524,6 +595,45 @@ status = "disabled"; }; + spi3: spi@402c8000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x402c8000 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <3>; + dmas = <&edma0 1 7>, <&edma0 1 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@402cc000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x402cc000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <4>; + dmas = <&edma0 1 10>, <&edma0 1 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@402d0000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x402d0000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <5>; + dmas = <&edma0 1 13>, <&edma0 1 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c3: i2c@402d8000 { compatible = "nxp,s32g3-i2c", "nxp,s32g2-i2c"; diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi index d26af0fb8be7..f1969cdcef19 100644 --- a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi +++ b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi @@ -173,6 +173,78 @@ pinmux = <0x2d40>, <0x2d30>; }; }; + + dspi1_pins: dspi1-pins { + dspi1-grp0 { + pinmux = <0x72>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp1 { + pinmux = <0x62>; + output-enable; + slew-rate = <150>; + }; + + dspi1-grp2 { + pinmux = <0x83>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi1-grp3 { + pinmux = <0x5F0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp4 { + pinmux = <0x3D92>, + <0x3DA2>, + <0x3DB2>; + }; + }; + + dspi5_pins: dspi5-pins { + dspi5-grp0 { + pinmux = <0x93>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi5-grp1 { + pinmux = <0xA0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi5-grp2 { + pinmux = <0x3ED2>, + <0x3EE2>, + <0x3EF2>; + }; + + dspi5-grp3 { + pinmux = <0xB3>; + output-enable; + slew-rate = <150>; + }; + + dspi5-grp4 { + pinmux = <0xC3>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + }; }; &can0 { @@ -220,3 +292,15 @@ pinctrl-1 = <&i2c4_gpio_pins>; status = "okay"; }; + +&spi1 { + pinctrl-0 = <&dspi1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi5 { + pinctrl-0 = <&dspi5_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi index 4587e1cb8835..3bc3335c9248 100644 --- a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi @@ -127,6 +127,78 @@ pinmux = <0x2d40>, <0x2d30>; }; }; + + dspi1_pins: dspi1-pins { + dspi1-grp0 { + pinmux = <0x72>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp1 { + pinmux = <0x62>; + output-enable; + slew-rate = <150>; + }; + + dspi1-grp2 { + pinmux = <0x83>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi1-grp3 { + pinmux = <0x5F0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp4 { + pinmux = <0x3D92>, + <0x3DA2>, + <0x3DB2>; + }; + }; + + dspi5_pins: dspi5-pins { + dspi5-grp0 { + pinmux = <0x93>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi5-grp1 { + pinmux = <0xA0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi5-grp2 { + pinmux = <0x3ED2>, + <0x3EE2>, + <0x3EF2>; + }; + + dspi5-grp3 { + pinmux = <0xB3>; + output-enable; + slew-rate = <150>; + }; + + dspi5-grp4 { + pinmux = <0xC3>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + }; }; &can0 { @@ -160,6 +232,18 @@ }; }; +&spi1 { + pinctrl-0 = <&dspi1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi5 { + pinctrl-0 = <&dspi5_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c2_pins>; diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi index 2471bb109e8e..9d44f488c083 100644 --- a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi +++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi @@ -10,23 +10,7 @@ #include <dt-bindings/net/ti-dp83867.h> / { - sfp1: sfp1 { - compatible = "sff,sfp"; - i2c-bus = <&sfp1_i2c>; - mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>; - los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>; - }; - sfp2: sfp2 { - compatible = "sff,sfp"; - i2c-bus = <&sfp2_i2c>; - mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>; - los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>; - }; }; &dpmac1 { diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi index 65b4ed28a3d4..444bbf511596 100644 --- a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi @@ -47,6 +47,26 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + sfp2: sfp2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; }; &duart0 { @@ -69,6 +89,7 @@ reg = <0x70>; #address-cells = <1>; #size-cells = <0>; + vdd-supply = <®_3v3>; i2c@0 { reg = <0x0>; diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi index 138f8778afde..7da1bfd83cca 100644 --- a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi @@ -8,6 +8,14 @@ */ / { + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + reg_vcc3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index a77a504effea..c1e66db0f4c5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -126,6 +126,7 @@ f2s_free_clk: f2s-free-clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <100000000>; }; osc1: osc1 { diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index bb0bcc6875dc..e83fdc92621e 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -5,103 +5,12 @@ * Copyright (C) 2016, LG Electronics */ -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -/ { - #address-cells = <2>; - #size-cells = <2>; +#include "lg131x.dtsi" +/ { compatible = "lge,lg1312"; - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - L2_0: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; - }; - - gic: interrupt-controller@c0001000 { - #interrupt-cells = <3>; - compatible = "arm,gic-400"; - interrupt-controller; - reg = <0x0 0xc0001000 0x1000>, - <0x0 0xc0002000 0x2000>, - <0x0 0xc0004000 0x2000>, - <0x0 0xc0006000 0x2000>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, - <&cpu1>, - <&cpu2>, - <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>; - }; - - clk_bus: clk_bus { - #clock-cells = <0>; - - compatible = "fixed-clock"; - clock-frequency = <198000000>; - clock-output-names = "BUSCLK"; - }; soc { #address-cells = <2>; @@ -122,233 +31,4 @@ mac-address = [ 00 00 00 00 00 00 ]; }; }; - - amba { - #address-cells = <2>; - #size-cells = <1>; - - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - timers: timer@fd100000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x0 0xfd100000 0x1000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; - clock-names = "timer0clk", "timer1clk", "apb_pclk"; - }; - wdog: watchdog@fd200000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0 0xfd200000 0x1000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "wdog_clk", "apb_pclk"; - }; - uart0: serial@fe000000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe000000 0x1000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart1: serial@fe100000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe100000 0x1000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart2: serial@fe200000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe200000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - spi0: spi@fe800000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe800000 0x1000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - spi1: spi@fe900000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe900000 0x1000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - dmac0: dma-controller@c1128000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xc1128000 0x1000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - gpio0: gpio@fd400000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd400000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio1: gpio@fd410000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd410000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio2: gpio@fd420000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd420000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio3: gpio@fd430000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd430000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio4: gpio@fd440000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd440000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio5: gpio@fd450000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd450000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio6: gpio@fd460000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd460000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio7: gpio@fd470000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd470000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio8: gpio@fd480000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd480000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio9: gpio@fd490000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd490000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio10: gpio@fd4a0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4a0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio11: gpio@fd4b0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4b0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio12: gpio@fd4c0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4c0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio13: gpio@fd4d0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4d0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio14: gpio@fd4e0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4e0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio15: gpio@fd4f0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4f0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio16: gpio@fd500000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd500000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio17: gpio@fd510000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd510000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - }; }; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index c07d670bc465..92fa5694cad1 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -5,103 +5,12 @@ * Copyright (C) 2016, LG Electronics */ -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -/ { - #address-cells = <2>; - #size-cells = <2>; +#include "lg131x.dtsi" +/ { compatible = "lge,lg1313"; - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - L2_0: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; - }; - - gic: interrupt-controller@c0001000 { - #interrupt-cells = <3>; - compatible = "arm,gic-400"; - interrupt-controller; - reg = <0x0 0xc0001000 0x1000>, - <0x0 0xc0002000 0x2000>, - <0x0 0xc0004000 0x2000>, - <0x0 0xc0006000 0x2000>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, - <&cpu1>, - <&cpu2>, - <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) | - IRQ_TYPE_LEVEL_LOW)>; - }; - - clk_bus: clk_bus { - #clock-cells = <0>; - - compatible = "fixed-clock"; - clock-frequency = <198000000>; - clock-output-names = "BUSCLK"; - }; soc { #address-cells = <2>; @@ -122,233 +31,4 @@ mac-address = [ 00 00 00 00 00 00 ]; }; }; - - amba { - #address-cells = <2>; - #size-cells = <1>; - - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - timers: timer@fd100000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x0 0xfd100000 0x1000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; - clock-names = "timer0clk", "timer1clk", "apb_pclk"; - }; - wdog: watchdog@fd200000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0 0xfd200000 0x1000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "wdog_clk", "apb_pclk"; - }; - uart0: serial@fe000000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe000000 0x1000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart1: serial@fe100000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe100000 0x1000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart2: serial@fe200000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe200000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - spi0: spi@fe800000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe800000 0x1000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - spi1: spi@fe900000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe900000 0x1000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - dmac0: dma-controller@c1128000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xc1128000 0x1000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - gpio0: gpio@fd400000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd400000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio1: gpio@fd410000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd410000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio2: gpio@fd420000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd420000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio3: gpio@fd430000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd430000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio4: gpio@fd440000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd440000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio5: gpio@fd450000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd450000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio6: gpio@fd460000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd460000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio7: gpio@fd470000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd470000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio8: gpio@fd480000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd480000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio9: gpio@fd490000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd490000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio10: gpio@fd4a0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4a0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio11: gpio@fd4b0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4b0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio12: gpio@fd4c0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4c0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio13: gpio@fd4d0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4d0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio14: gpio@fd4e0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4e0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio15: gpio@fd4f0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4f0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio16: gpio@fd500000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd500000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio17: gpio@fd510000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd510000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - }; }; diff --git a/arch/arm64/boot/dts/lg/lg131x.dtsi b/arch/arm64/boot/dts/lg/lg131x.dtsi new file mode 100644 index 000000000000..4cb1e4510897 --- /dev/null +++ b/arch/arm64/boot/dts/lg/lg131x.dtsi @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for lg131x SoCs + * + * Copyright (C) 2016, LG Electronics + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + gic: interrupt-controller@c0001000 { + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + interrupt-controller; + reg = <0x0 0xc0001000 0x1000>, + <0x0 0xc0002000 0x2000>, + <0x0 0xc0004000 0x2000>, + <0x0 0xc0006000 0x2000>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + clk_bus: clk_bus { + #clock-cells = <0>; + + compatible = "fixed-clock"; + clock-frequency = <198000000>; + clock-output-names = "BUSCLK"; + }; + + amba { + #address-cells = <2>; + #size-cells = <1>; + + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + timers: timer@fd100000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xfd100000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; + }; + wdog: watchdog@fd200000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xfd200000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "wdog_clk", "apb_pclk"; + }; + uart0: serial@fe000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe000000 0x1000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + uart1: serial@fe100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe100000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + uart2: serial@fe200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe200000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + spi0: spi@fe800000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe800000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "sspclk", "apb_pclk"; + }; + spi1: spi@fe900000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe900000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "sspclk", "apb_pclk"; + }; + dmac0: dma-controller@c1128000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xc1128000 0x1000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + gpio0: gpio@fd400000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd400000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio1: gpio@fd410000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd410000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio2: gpio@fd420000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd420000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio3: gpio@fd430000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd430000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio4: gpio@fd440000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd440000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio5: gpio@fd450000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd450000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio6: gpio@fd460000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd460000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio7: gpio@fd470000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd470000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio8: gpio@fd480000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd480000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio9: gpio@fd490000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd490000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio10: gpio@fd4a0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4a0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio11: gpio@fd4b0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4b0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio12: gpio@fd4c0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4c0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio13: gpio@fd4d0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4d0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio14: gpio@fd4e0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4e0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio15: gpio@fd4f0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4f0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio16: gpio@fd500000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd500000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio17: gpio@fd510000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd510000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index ce751b5028e2..40e5ac6cd468 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -32,3 +32,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-base.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-cf-pro.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9131-cf-solidwan.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9132-clearfog.dtb + +subdir-y += mmp diff --git a/arch/arm64/boot/dts/marvell/mmp/Makefile b/arch/arm64/boot/dts/marvell/mmp/Makefile new file mode 100644 index 000000000000..103175ed63b0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/mmp/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts new file mode 100644 index 000000000000..47a4f01a7077 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "pxa1908.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> + +/ { + model = "Samsung Galaxy Core Prime VE LTE"; + compatible = "samsung,coreprimevelte", "marvell,pxa1908"; + + aliases { + mmc0 = &sdh2; /* eMMC */ + mmc1 = &sdh0; /* SD card */ + serial0 = &uart0; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + fb0: framebuffer@17177000 { + compatible = "simple-framebuffer"; + reg = <0 0x17177000 0 (480 * 800 * 4)>; + width = <480>; + height = <800>; + stride = <(480 * 4)>; + format = "a8r8g8b8"; + }; + }; + + /* Bootloader fills this in */ + memory@0 { + device_type = "memory"; + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@17000000 { + reg = <0 0x17000000 0 0x1800000>; + no-map; + }; + + gpu@9000000 { + reg = <0 0x9000000 0 0x1000000>; + }; + + /* Communications processor, aka modem */ + cp@5000000 { + reg = <0 0x5000000 0 0x3000000>; + }; + + cm3@a000000 { + reg = <0 0xa000000 0 0x80000>; + }; + + seclog@8000000 { + reg = <0 0x8000000 0 0x100000>; + }; + + ramoops@8100000 { + compatible = "ramoops"; + reg = <0 0x8100000 0 0x40000>; + record-size = <0x8000>; + console-size = <0x20000>; + max-reason = <5>; + }; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <3>; + i2c-gpio,timeout-ms = <100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_muic_pins>; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + autorepeat; + + key-home { + label = "Home"; + linux,code = <KEY_HOME>; + gpios = <&gpio 50 GPIO_ACTIVE_LOW>; + }; + + key-volup { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + key-voldown { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&smmu { + status = "okay"; +}; + +&pmx { + pinctrl-single,gpio-range = <&range 55 55 0>, + <&range 110 32 0>, + <&range 52 1 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>; + + board_pins_0: board-pins-0 { + pinctrl-single,pins = < + 0x160 0 + 0x164 0 + 0x168 0 + 0x16c 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + board_pins_1: board-pins-1 { + pinctrl-single,pins = < + 0x44 1 + 0x48 1 + 0x20 1 + 0x18 1 + 0x14 1 + 0x10 1 + 0xc 1 + 0x8 1 + 0x68 1 + 0x58 0 + 0x54 0 + 0x7c 0 + 0x6c 0 + 0x70 0 + 0x4c 1 + 0x50 1 + 0xac 0 + 0x90 0 + 0x8c 0 + 0x88 0 + 0x84 0 + 0xc8 0 + 0x128 0 + 0x190 0 + 0x194 0 + 0x1a0 0 + 0x114 0 + 0x118 0 + 0x1d8 0 + 0x1e4 0 + 0xe8 0 + 0x100 0 + 0x204 0 + 0x210 0 + 0x218 0 + >; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + board_pins_2: board-pins-2 { + pinctrl-single,pins = < + 0x260 0 + 0x264 0 + 0x268 0 + 0x26c 0 + 0x270 0 + 0x274 0 + 0x78 0 + 0x74 0 + 0xb0 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + uart0_pins: uart0-pins { + pinctrl-single,pins = < + 0x198 6 + 0x19c 6 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + gpio_keys_pins: gpio-keys-pins { + pinctrl-single,pins = < + 0x11c 0 + 0x120 0 + 0x1a4 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + i2c_muic_pins: i2c-muic-pins { + pinctrl-single,pins = < + 0x154 0 + 0x150 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + sdh0_pins_0: sdh0-pins-0 { + pinctrl-single,pins = < + 0x108 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh0_pins_1: sdh0-pins-1 { + pinctrl-single,pins = < + 0x94 0 + 0x98 0 + 0x9c 0 + 0xa0 0 + 0xa4 0 + >; + pinctrl-single,drive-strength = <0x800 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh0_pins_2: sdh0-pins-2 { + pinctrl-single,pins = < + 0xa8 0 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&twsi0 { + status = "okay"; +}; + +&twsi1 { + status = "okay"; +}; + +&twsi2 { + status = "okay"; +}; + +&twsi3 { + status = "okay"; +}; + +&usb { + extcon = <&muic>, <&muic>; +}; + +&sdh2 { + /* Disabled for now because initialization fails with -ETIMEDOUT. */ + status = "disabled"; + bus-width = <8>; + non-removable; + mmc-ddr-1_8v; +}; + +&sdh0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>; + cd-gpios = <&gpio 11 0>; + cd-inverted; + bus-width = <4>; + wp-inverted; +}; diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi new file mode 100644 index 000000000000..cf2b9109688c --- /dev/null +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/marvell,pxa1908.h> + +/ { + model = "Marvell Armada PXA1908"; + compatible = "marvell,pxa1908"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0 3>; + enable-method = "psci"; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smmu: iommu@c0010000 { + compatible = "arm,mmu-400"; + reg = <0 0xc0010000 0 0x10000>; + #global-interrupts = <1>; + #iommu-cells = <1>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@d1df9000 { + compatible = "arm,gic-400"; + reg = <0 0xd1df9000 0 0x1000>, + <0 0xd1dfa000 0 0x2000>, + /* The subsequent registers are guesses. */ + <0 0xd1dfc000 0 0x2000>, + <0 0xd1dfe000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apb@d4000000 { + compatible = "simple-bus"; + reg = <0 0xd4000000 0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xd4000000 0x200000>; + + pdma: dma-controller@0 { + compatible = "marvell,pdma-1.0"; + reg = <0 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <30>; + #dma-cells = <2>; + }; + + twsi1: i2c@10800 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10800 0x64>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbc PXA1908_CLK_TWSI1>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi0: i2c@11000 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11000 0x64>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbc PXA1908_CLK_TWSI0>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi3: i2c@13800 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x13800 0x64>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbc PXA1908_CLK_TWSI3>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + apbc: clock-controller@15000 { + compatible = "marvell,pxa1908-apbc"; + reg = <0x15000 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@17000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; + reg = <0x17000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbc PXA1908_CLK_UART0>; + reg-shift = <2>; + }; + + uart1: serial@18000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; + reg = <0x18000 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbc PXA1908_CLK_UART1>; + reg-shift = <2>; + }; + + gpio: gpio@19000 { + compatible = "marvell,mmp-gpio"; + reg = <0x19000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&apbc PXA1908_CLK_GPIO>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <2>; + ranges = <0 0x19000 0x800>; + + gpio@0 { + reg = <0x0 0x4>; + }; + + gpio@4 { + reg = <0x4 0x4>; + }; + + gpio@8 { + reg = <0x8 0x4>; + }; + + gpio@100 { + reg = <0x100 0x4>; + }; + }; + + pmx: pinmux@1e000 { + compatible = "marvell,pxa1908-padconf", "pinconf-single"; + reg = <0x1e000 0x330>; + + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + uart2: serial@36000 { + compatible = "mrvl,mmp-uart", "intel,xscale-uart"; + reg = <0x36000 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbcp PXA1908_CLK_UART2>; + reg-shift = <2>; + }; + + twsi2: i2c@37000 { + compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x37000 0x64>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apbcp PXA1908_CLK_TWSI2>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + apbcp: clock-controller@3b000 { + compatible = "marvell,pxa1908-apbcp"; + reg = <0x3b000 0x1000>; + #clock-cells = <1>; + }; + + mpmu: clock-controller@50000 { + compatible = "marvell,pxa1908-mpmu"; + reg = <0x50000 0x1000>; + #clock-cells = <1>; + }; + }; + + axi@d4200000 { + compatible = "simple-bus"; + reg = <0 0xd4200000 0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xd4200000 0x200000>; + + usbphy: phy@7000 { + compatible = "marvell,pxa1928-usb-phy"; + reg = <0x7000 0x200>; + clocks = <&apmu PXA1908_CLK_USB>; + #phy-cells = <0>; + }; + + usb: usb@8000 { + compatible = "chipidea,usb2"; + reg = <0x8000 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apmu PXA1908_CLK_USB>; + phys = <&usbphy>; + phy-names = "usb-phy"; + }; + + sdh0: mmc@80000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x80000 0x120>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apmu PXA1908_CLK_SDH0>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + sdh1: mmc@80800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x80800 0x120>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apmu PXA1908_CLK_SDH1>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + sdh2: mmc@81000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0x81000 0x120>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apmu PXA1908_CLK_SDH2>; + clock-names = "io"; + mrvl,clk-delay-cycles = <31>; + }; + + apmu: clock-controller@82800 { + compatible = "marvell,pxa1908-apmu"; + reg = <0x82800 0x400>; + #clock-cells = <1>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index f68865d06edd..a4df4c21399e 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393218.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-squirtle.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb @@ -76,8 +77,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb -dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589824.dtb -dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589825.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku0.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi index 81ba045e0e0e..5fd222df440d 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi @@ -3,6 +3,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/richtek,rt5190a-regulator.h> #include "mt7988a.dtsi" @@ -21,6 +22,25 @@ status = "okay"; }; + gpio-leds { + compatible = "gpio-leds"; + + led_green: led-green { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 79 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_blue: led-blue { + function = LED_FUNCTION_WPS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 63 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -40,6 +60,10 @@ }; }; +&cci { + proc-supply = <&rt5190_buck3>; +}; + &cpu0 { proc-supply = <&rt5190_buck3>; }; @@ -219,18 +243,6 @@ }; &pio { - mdio0_pins: mdio0-pins { - mux { - function = "eth"; - groups = "mdc_mdio0"; - }; - - conf { - pins = "SMI_0_MDC", "SMI_0_MDIO"; - drive-strength = <8>; - }; - }; - i2c0_pins: i2c0-g0-pins { mux { function = "i2c"; @@ -245,20 +257,6 @@ }; }; - i2c1_sfp_pins: i2c1-sfp-g0-pins { - mux { - function = "i2c"; - groups = "i2c1_sfp"; - }; - }; - - i2c2_0_pins: i2c2-g0-pins { - mux { - function = "i2c"; - groups = "i2c2_0"; - }; - }; - i2c2_1_pins: i2c2-g1-pins { mux { function = "i2c"; @@ -294,34 +292,6 @@ }; }; - gbe0_led1_pins: gbe0-led1-pins { - mux { - function = "led"; - groups = "gbe0_led1"; - }; - }; - - gbe1_led1_pins: gbe1-led1-pins { - mux { - function = "led"; - groups = "gbe1_led1"; - }; - }; - - gbe2_led1_pins: gbe2-led1-pins { - mux { - function = "led"; - groups = "gbe2_led1"; - }; - }; - - gbe3_led1_pins: gbe3-led1-pins { - mux { - function = "led"; - groups = "gbe3_led1"; - }; - }; - i2p5gbe_led0_pins: 2p5gbe-led0-pins { mux { function = "led"; @@ -329,13 +299,6 @@ }; }; - i2p5gbe_led1_pins: 2p5gbe-led1-pins { - mux { - function = "led"; - groups = "2p5gbe_led1"; - }; - }; - mmc0_pins_emmc_45: mmc0-emmc-45-pins { mux { function = "flash"; @@ -357,40 +320,12 @@ }; }; - snfi_pins: snfi-pins { - mux { - function = "flash"; - groups = "snfi"; - }; - }; - - spi0_pins: spi0-pins { - mux { - function = "spi"; - groups = "spi0"; - }; - }; - spi0_flash_pins: spi0-flash-pins { mux { function = "spi"; groups = "spi0", "spi0_wp_hold"; }; }; - - spi2_pins: spi2-pins { - mux { - function = "spi"; - groups = "spi2"; - }; - }; - - spi2_flash_pins: spi2-flash-pins { - mux { - function = "spi"; - groups = "spi2", "spi2_wp_hold"; - }; - }; }; &pwm { diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi index c46b31f8d653..560ec86dbec0 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi @@ -12,6 +12,35 @@ #address-cells = <2>; #size-cells = <2>; + cci: cci { + compatible = "mediatek,mt7988-cci", "mediatek,mt8183-cci"; + clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>, + <&topckgen CLK_TOP_XTAL>; + clock-names = "cci", "intermediate"; + operating-points-v2 = <&cci_opp>; + }; + + cci_opp: opp-table-cci { + compatible = "operating-points-v2"; + opp-shared; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <850000>; + }; + opp-660000000 { + opp-hz = /bits/ 64 <660000000>; + opp-microvolt = <850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <850000>; + }; + opp-1080000000 { + opp-hz = /bits/ 64 <1080000000>; + opp-microvolt = <900000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -25,6 +54,7 @@ <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cpu1: cpu@1 { @@ -36,6 +66,7 @@ <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cpu2: cpu@2 { @@ -47,6 +78,7 @@ <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cpu3: cpu@3 { @@ -58,6 +90,7 @@ <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cluster0_opp: opp-table-0 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 6d1d8877b43f..122a57c3780b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -318,6 +318,14 @@ #address-cells = <2>; #size-cells = <2>; ranges; + + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + vpu_dma_reserved: vpu-dma-mem@b7000000 { compatible = "shared-dma-pool"; reg = <0 0xb7000000 0 0x500000>; @@ -887,6 +895,7 @@ <&topckgen CLK_TOP_AUD_2_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_APLL1>, <&topckgen CLK_TOP_APLL2>; + memory-region = <&afe_dma_mem>; }; mmc0: mmc@11230000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index ecc6c4d6f1cd..400c61d11035 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -85,6 +85,13 @@ #size-cells = <2>; ranges; + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + scp_mem_reserved: memory@50000000 { compatible = "shared-dma-pool"; reg = <0 0x50000000 0 0x2900000>; @@ -199,6 +206,10 @@ }; }; +&afe { + memory-region = <&afe_dma_mem>; +}; + &auxadc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts new file mode 100644 index 000000000000..f721ad4e5c97 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2024 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-voltorb.dtsi" + +/ { + model = "Google squirtle board"; + compatible = "google,squirtle", "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&i2c1 { + touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_s3>; + status = "fail-needs-probe"; + }; + + touchscreen@16 { + compatible = "elan,ekth8d18", "elan,ekth6a12nay"; + reg = <0x16>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_s3>; + status = "fail-needs-probe"; + }; +}; + +&i2c2 { + trackpad@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + hid-descr-addr = <0x20>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + status = "fail-needs-probe"; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + /delete-node/ codec@1a; + + rt5650: codec@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>; + avdd-supply = <&mt6366_vio18_reg>; + cpvdd-supply = <&mt6366_vio18_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_codec_pins_default>; + cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + realtek,dmic1-data-pin = <2>; + realtek,jd-mode = <2>; + }; +}; + +&sound { + compatible = "mediatek,mt8186-mt6366-rt5650-sound"; + model = "mt8186_rt5650"; + + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "HDMI1", "TX"; + + hs-playback-dai-link { + codec { + sound-dai = <&rt5650>; + }; + }; + + hs-capture-dai-link { + codec { + sound-dai = <&rt5650>; + }; + }; + + spk-hdmi-playback-dai-link { + codec { + sound-dai = <&it6505dptx>; + }; + }; +}; + +&speaker_codec { + status = "disabled"; +}; + +&trackpad_steelix { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi index e74e886a00cb..8a196dc9a96b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi @@ -118,13 +118,16 @@ i2c-scl-internal-delay-ns = <22000>; /* second source component */ - trackpad@2c { + trackpad_steelix: trackpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; hid-descr-addr = <0x20>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; vdd-supply = <&pp3300_s3>; wakeup-source; + status = "fail-needs-probe"; }; }; @@ -197,3 +200,7 @@ }; }; }; + +&trackpad { + status = "fail-needs-probe"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts index c3ae6f9616c8..4dbf2cb73a81 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts @@ -17,6 +17,8 @@ compatible = "hid-over-i2c"; reg = <0x15>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; hid-descr-addr = <0x0001>; vdd-supply = <&pp3300_s3>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts index 447b57b12b41..ee5bc2cd9e9f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts @@ -19,6 +19,8 @@ compatible = "hid-over-i2c"; reg = <0x15>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; hid-descr-addr = <0x0001>; vdd-supply = <&pp3300_s3>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts deleted file mode 100644 index d16834eec87a..000000000000 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright 2022 Google LLC - */ - -/dts-v1/; -#include "mt8186-corsola-voltorb.dtsi" - -/ { - model = "Google Voltorb sku589824 board"; - compatible = "google,voltorb-sku589824", "google,voltorb", - "mediatek,mt8186"; -}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts index 45e57f7706cc..cc805408a8b7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts @@ -7,9 +7,8 @@ #include "mt8186-corsola-voltorb.dtsi" / { - model = "Google Voltorb sku589825 board"; - compatible = "google,voltorb-sku589825", "google,voltorb", - "mediatek,mt8186"; + model = "Google Voltorb board"; + compatible = "google,voltorb", "mediatek,mt8186"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi index fc78a79d96e9..ff20376a44d7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi @@ -161,6 +161,13 @@ #size-cells = <2>; ranges; + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + adsp_dma_mem: memory@61000000 { compatible = "shared-dma-pool"; reg = <0 0x61000000 0 0x100000>; @@ -310,6 +317,7 @@ }; &afe { + memory-region = <&afe_dma_mem>; status = "okay"; }; @@ -390,19 +398,17 @@ &i2c2 { pinctrl-names = "default"; - /* - * Trackpad pin put here to work around second source components - * sharing the pinmux in steelix designs. - */ - pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; i2c-scl-internal-delay-ns = <10000>; status = "okay"; - trackpad@15 { + trackpad: trackpad@15 { compatible = "elan,ekth3000"; reg = <0x15>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; vcc-supply = <&pp3300_s3>; wakeup-source; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts index 8c485c3ced2c..163960f58db5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts @@ -85,8 +85,15 @@ trackpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; hid-descr-addr = <0x20>; interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; wakeup-source; + status = "fail-needs-probe"; }; }; + +&trackpad { + status = "fail-needs-probe"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index dd0d07fbe61a..0b4664f044a1 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -199,6 +199,13 @@ #size-cells = <2>; ranges; + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + scp_mem_reserved: scp@50000000 { compatible = "shared-dma-pool"; reg = <0 0x50000000 0 0x2900000>; @@ -276,6 +283,10 @@ }; }; +&afe { + memory-region = <&afe_dma_mem>; +}; + &dsi0 { status = "okay"; }; @@ -335,11 +346,13 @@ clock-frequency = <400000>; clock-stretch-ns = <12600>; pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>, <&trackpad_pins>; + pinctrl-0 = <&i2c2_pins>; - trackpad@15 { + trackpad: trackpad@15 { compatible = "elan,ekth3000"; reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; vcc-supply = <&pp3300_u>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi index eaf45d42cd34..a2cdecd2b903 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi @@ -1161,6 +1161,10 @@ linux,keycodes = <KEY_POWER>; wakeup-source; }; + + home { + linux,keycodes = <KEY_HOME>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index be5e5f339e81..cf8cd37f5708 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -79,9 +79,21 @@ reg = <0 0x54600000 0x0 0x200000>; }; - snd_dma_mem: memory@60000000 { + adsp_mem: memory@60000000 { compatible = "shared-dma-pool"; - reg = <0 0x60000000 0 0x1100000>; + reg = <0 0x60000000 0 0xf00000>; + no-map; + }; + + afe_dma_mem: memory@60f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x60f00000 0 0x100000>; + no-map; + }; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; no-map; }; @@ -179,6 +191,16 @@ }; }; +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + memory-region = <&afe_dma_mem>; + status = "okay"; +}; + &disp_pwm0 { pinctrl-names = "default"; pinctrl-0 = <&disp_pwm0_pins>; @@ -968,6 +990,21 @@ &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + + mt6359keys: keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + + home { + linux,keycodes = <KEY_HOME>; + }; + }; }; &scp { @@ -976,6 +1013,26 @@ status = "okay"; }; +&sound { + compatible = "mediatek,mt8195_mt6359"; + model = "mt8395-evk"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_default_pins>; + audio-routing = + "Headphone", "Headphone L", + "Headphone", "Headphone R"; + mediatek,adsp = <&adsp>; + status = "okay"; + + headphone-dai-link { + link-name = "DL_SRC_BE"; + + codec { + sound-dai = <&pmic 0>; + }; + }; +}; + &spi1 { pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi index fead4dde590d..acd3137d2464 100644 --- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi @@ -32,11 +32,6 @@ #interrupt-cells = <3>; interrupt-controller; #address-cells = <0>; - ppi-partitions { - ppi_cluster0: interrupt-partition-0 { - affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 0fbb8a494dba..171e08c94d5a 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -12,6 +12,7 @@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@ DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@ DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@ DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@ +DTC_FLAGS_tegra264-p3971-0089+p3834-0008 := -@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb @@ -31,3 +32,4 @@ dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb +dtb-$(CONFIG_ARCH_TEGRA_264_SOC) += tegra264-p3971-0089+p3834-0008.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi new file mode 100644 index 000000000000..94ace6784749 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264-p3834.dtsi" + +/ { + compatible = "nvidia,p3834-0008", "nvidia,tegra264"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi new file mode 100644 index 000000000000..06795c82427a --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264.dtsi" + +/ { + compatible = "nvidia,p3834", "nvidia,tegra264"; + + aliases { + }; + + bus@0 { + serial@c4e0000 { + status = "okay"; + }; + + serial@c5a0000 { + status = "okay"; + }; + }; + + bus@8100000000 { + iommu@5000000 { + status = "okay"; + }; + + iommu@6000000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts new file mode 100644 index 000000000000..3a6f4b7e6b75 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +/dts-v1/; + +// module files must be included first +#include "tegra264-p3834-0008.dtsi" +#include "tegra264-p3971-0089+p3834.dtsi" + +/ { + model = "NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform"; + compatible = "nvidia,p3971-0089+p3834-0008", "nvidia,p3834-0008", "nvidia,tegra264"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi new file mode 100644 index 000000000000..46cfa8f1da1c --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264-p3971-0089.dtsi" + +/ { + aliases { + serial0 = &{/bus@0/serial@c4e0000}; + serial1 = &{/bus@0/serial@c5a0000}; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi new file mode 100644 index 000000000000..e8576cf2a0b6 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264-p3971.dtsi" diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi new file mode 100644 index 000000000000..6b6259b7310f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +/ { +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi new file mode 100644 index 000000000000..62c87a387b14 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi @@ -0,0 +1,415 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include <dt-bindings/clock/nvidia,tegra264.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/memory/nvidia,tegra264.h> +#include <dt-bindings/reset/nvidia,tegra264.h> + +/ { + compatible = "nvidia,tegra264"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + numa-node-id = <0>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + shmem_bpmp: shmem@86070000 { + compatible = "nvidia,tegra264-bpmp-shmem"; + reg = <0x0 0x86070000 0x0 0x2000>; + no-map; + }; + }; + + /* SYSTEM MMIO */ + bus@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0x00 0x00000000 0x01 0x00000000>; + + misc@100000 { + compatible = "nvidia,tegra234-misc"; + reg = <0x0 0x00100000 0x0 0x0f000>, + <0x0 0x0c140000 0x0 0x10000>; + }; + + timer@8000000 { + compatible = "nvidia,tegra234-timer"; + reg = <0x0 0x08000000 0x0 0x140000>; + interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gpcdma: dma-controller@8400000 { + compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma"; + reg = <0x0 0x08400000 0x0 0x210000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&smmu1 0x00000800>; + dma-coherent; + dma-channel-mask = <0xfffffffe>; + status = "disabled"; + }; + + hsp_top: hsp@8800000 { + compatible = "nvidia,tegra264-hsp"; + reg = <0x0 0x08800000 0x0 0xd0000>; + interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 624 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 626 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell", "shared0", "shared1", "shared2", + "shared3", "shared4", "shared5", "shared6", + "shared7"; + #mbox-cells = <2>; + }; + + rtc: rtc@c2c0000 { + compatible = "nvidia,tegra264-rtc", "nvidia,tegra20-rtc"; + reg = <0x0 0x0c2c0000 0x0 0x10000>; + interrupt-parent = <&pmc>; + interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA264_CLK_CLK_S>; + clock-names = "rtc"; + status = "disabled"; + }; + + serial@c4e0000 { + compatible = "nvidia,tegra264-utc"; + reg = <0x0 0x0c4e0000 0x0 0x8000>, + <0x0 0x0c4e8000 0x0 0x8000>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>; + rx-threshold = <4>; + tx-threshold = <4>; + status = "disabled"; + }; + + serial@c5a0000 { + compatible = "nvidia,tegra264-utc"; + reg = <0x0 0x0c5a0000 0x0 0x8000>, + <0x0 0x0c5a8000 0x0 0x8000>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>; + rx-threshold = <4>; + tx-threshold = <4>; + status = "disabled"; + }; + + uart0: serial@c5f0000 { + compatible = "arm,sbsa-uart"; + reg = <0x0 0x0c5f0000 0x0 0x10000>; + interrupts = <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pmc: pmc@c800000 { + compatible = "nvidia,tegra264-pmc"; + reg = <0x0 0x0c800000 0x0 0x100000>, + <0x0 0x0c990000 0x0 0x10000>, + <0x0 0x0ca00000 0x0 0x10000>, + <0x0 0x0c980000 0x0 0x10000>, + <0x0 0x0c9c0000 0x0 0x40000>; + reg-names = "pmc", "wake", "aotag", "scratch", "misc"; + #interrupt-cells = <2>; + interrupt-controller; + }; + }; + + /* TOP_MMIO */ + bus@8100000000 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0x81 0x00000000 0x01 0x00000000>, /* MMIO */ + <0x01 0x00000000 0x00 0x20000000 0x00 0x40000000>, /* non-prefetchable memory (32-bit) */ + <0x02 0x00000000 0xd0 0x00000000 0x08 0x80000000>; /* ECAM, prefetchable memory, I/O */ + + smmu1: iommu@5000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0x5000000 0x0 0x200000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 13 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + smmu2: iommu@6000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0x6000000 0x0 0x200000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + mc: memory-controller@8020000 { + compatible = "nvidia,tegra264-mc"; + reg = <0x00 0x8020000 0x0 0x20000>, /* MC broadcast */ + <0x00 0x8040000 0x0 0x20000>, /* MC 0 */ + <0x00 0x8060000 0x0 0x20000>, /* MC 1 */ + <0x00 0x8080000 0x0 0x20000>, /* MC 2 */ + <0x00 0x80a0000 0x0 0x20000>, /* MC 3 */ + <0x00 0x80c0000 0x0 0x20000>, /* MC 4 */ + <0x00 0x80e0000 0x0 0x20000>, /* MC 5 */ + <0x00 0x8100000 0x0 0x20000>, /* MC 6 */ + <0x00 0x8120000 0x0 0x20000>, /* MC 7 */ + <0x00 0x8140000 0x0 0x20000>, /* MC 8 */ + <0x00 0x8160000 0x0 0x20000>, /* MC 9 */ + <0x00 0x8180000 0x0 0x20000>, /* MC 10 */ + <0x00 0x81a0000 0x0 0x20000>, /* MC 11 */ + <0x00 0x81c0000 0x0 0x20000>, /* MC 12 */ + <0x00 0x81e0000 0x0 0x20000>, /* MC 13 */ + <0x00 0x8200000 0x0 0x20000>, /* MC 14 */ + <0x00 0x8220000 0x0 0x20000>; /* MC 15 */ + reg-names = "broadcast", "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", "ch14", + "ch15"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + #interconnect-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + + /* limit the DMA range for memory clients to [39:0] */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + + emc: external-memory-controller@8800000 { + compatible = "nvidia,tegra264-emc"; + reg = <0x00 0x8800000 0x0 0x20000>, + <0x00 0x8890000 0x0 0x20000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA264_CLK_EMC>; + clock-names = "emc"; + + #interconnect-cells = <0>; + nvidia,bpmp = <&bpmp>; + }; + }; + + smmu0: iommu@a000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0xa000000 0x0 0x200000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + smmu4: iommu@b000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0xb000000 0x0 0x200000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + gic: interrupt-controller@46000000 { + compatible = "arm,gic-v3"; + reg = <0x00 0x46000000 0x0 0x010000>, /* GICD */ + <0x00 0x46080000 0x0 0x400000>; /* GICR */ + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + + redistributor-stride = <0x0 0x40000>; + #redistributor-regions = <1>; + #interrupt-cells = <3>; + interrupt-controller; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x0 0x00 0x46000000 0x0 0x1000000>; + + its: msi-controller@40000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x40000 0x0 0x40000>; + #msi-cells = <1>; + msi-controller; + }; + }; + }; + + /* DISP_USB MMIO */ + bus@8800000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0x88 0x00000000 0x01 0x00000000>; + + smmu3: iommu@6000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0x6000000 0x0 0x200000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + }; + + /* UPHY MMIO */ + bus@a800000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0xa8 0x00000000 0x40 0x00000000>, /* MMIO, ECAM, prefetchable memory, I/O */ + <0x80 0x00000000 0x00 0x20000000 0x00 0x40000000>; /* non-prefetchable memory (32-bit) */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,armv8"; + device_type = "cpu"; + reg = <0x00000>; + status = "okay"; + + enable-method = "psci"; + numa-node-id = <0>; + + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + }; + + cpu1: cpu@1 { + compatible = "arm,armv8"; + device_type = "cpu"; + reg = <0x10000>; + status = "okay"; + + enable-method = "psci"; + numa-node-id = <0>; + + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + }; + }; + + bpmp: bpmp { + compatible = "nvidia,tegra264-bpmp", "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + memory-region = <&shmem_bpmp>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 669b888b27a1..4bfa926b6a08 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,12 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb -apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo +apq8016-sbc-d3-camera-mezzanine-dtbs := apq8016-sbc.dtb apq8016-sbc-d3-camera-mezzanine.dtbo +apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo dtb-$(CONFIG_ARCH_QCOM) += sar2130p-qar2130p.dtb -dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-d3-camera-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-schneider-hmibsc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb @@ -77,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8976-longcheer-l9360.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-h815.dtb @@ -309,6 +311,8 @@ x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs := x1e78100-lenovo-thinkpad-t14s-ole dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2.dtb x1e80100-asus-vivobook-s15-el2-dtbs := x1e80100-asus-vivobook-s15.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb x1e80100-asus-vivobook-s15-el2.dtb +x1e80100-asus-zenbook-a14-el2-dtbs := x1e80100-asus-zenbook-a14.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb x1e80100-crd-el2-dtbs := x1e80100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb x1e80100-crd-el2.dtb x1e80100-dell-xps13-9345-el2-dtbs := x1e80100-dell-xps13-9345.dtb x1-el2.dtbo @@ -325,5 +329,7 @@ x1e80100-microsoft-romulus15-el2-dtbs := x1e80100-microsoft-romulus15.dtb x1-el2 dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb +x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso index f9cbf8c1d689..d739ece6b44f 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso @@ -5,10 +5,12 @@ */ /dts-v1/; +/plugin/; -#include "apq8016-sbc.dts" +#include <dt-bindings/clock/qcom,gcc-msm8916.h> +#include <dt-bindings/gpio/gpio.h> -/ { +&{/} { camera_vdddo_1v8: regulator-camera-vdddo { compatible = "regulator-fixed"; regulator-name = "camera_vdddo"; @@ -38,6 +40,9 @@ status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; csiphy0_ep: endpoint { @@ -53,6 +58,9 @@ }; &cci_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + camera@3b { compatible = "ovti,ov5640"; reg = <0x3b>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 7f0faf26b707..bfe59b020841 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -885,8 +885,24 @@ ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 78e1992b7495..fffb47ec2448 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -847,8 +847,24 @@ ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 142 @@ -919,8 +935,24 @@ ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 75 diff --git a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts new file mode 100644 index 000000000000..e524d58cf0a4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, André Apitzsch <git@apitzsch.eu> + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> + +#include "msm8976.dtsi" +#include "pm8004.dtsi" +#include "pm8950.dtsi" + +/ { + model = "BQ Aquaris X5 Plus (Longcheer L9360)"; + compatible = "longcheer,l9360", "qcom,msm8976"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@83200000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x83200000 0x0 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_sensor_default>, <&volume_up_default>; + pinctrl-names = "default"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&tlmm 101 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_WHITE>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-0 = <&button_backlight_default>; + pinctrl-names = "default"; + }; + }; + + reg_ts_vdd: regulator-vdd-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vdd-ts"; + + gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + framebuffer@83000000 { + reg = <0x0 0x83000000 0x0 0x2800000>; + no-map; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + nfc@28 { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupts-extended = <&tlmm 140 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 109 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&nfc_default>; + pinctrl-1 = <&nfc_sleep>; + pinctrl-names = "default", "sleep"; + }; +}; + +&blsp2_i2c2 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + + interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&ts_int_default>, <&ts_reset_default>; + pinctrl-1 = <&ts_int_sleep>, <&ts_reset_sleep>; + pinctrl-names = "default", "sleep"; + + vdd-supply = <&pm8950_l6>; + vio-supply = <®_ts_vdd>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&gcc { + vdd_gfx-supply = <&pm8004_s5>; +}; + +&pm8004_spmi_regulators { + vdd_s2-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + + /* Cluster 1 supply */ + pm8004_s2: s2 { + /* regulator-min-microvolt = <500000>; */ + /* Set .95V to prevent unstabilities until CPR for this SoC is done */ + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-name = "vdd_apc1"; + /* Set always on until the CPU PLL is done */ + regulator-always-on; + regulator-boot-on; + }; + + pm8004_s5: s5 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-enable-ramp-delay = <500>; + regulator-name = "vdd_gfx"; + /* Hack this on until the gpu driver is ready for it */ + regulator-always-on; + }; +}; + +&pm8950_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8950_spmi_regulators { + vdd_s5-supply = <&vph_pwr>; + + /* Cluster 0 supply */ + pm8950_spmi_s5: s5 { + /* Set .95V to prevent unstabilities until CPR for this SoC is done */ + /* regulator-min-microvolt = <500000>; */ + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-name = "vdd_apc0"; + /* Set always on until the CPU PLL is done */ + regulator-always-on; + regulator-boot-on; + }; +}; + +&rpm_requests { + pm8950_regulators: regulators { + compatible = "qcom,rpm-pm8950-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_l1_l19-supply = <&pm8950_s3>; + vdd_l2_l23-supply = <&pm8950_s3>; + vdd_l3-supply = <&pm8950_s3>; + vdd_l5_l6_l7_l16-supply = <&pm8950_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + + pm8950_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1162500>; + }; + + pm8950_s3: s3 { + regulator-min-microvolt = <1325000>; + regulator-max-microvolt = <1325000>; + }; + + pm8950_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8950_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8950_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8950_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8950_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8950_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8950_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8950_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8950_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8950_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8950_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8950_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8950_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdhc_1 { + bus-width = <8>; + non-removable; + vmmc-supply = <&pm8950_l8>; + vqmmc-supply = <&pm8950_l5>; + status = "okay"; +}; + +&sdhc_2 { + bus-width = <4>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8950_l11>; + vqmmc-supply = <&pm8950_l12>; + + pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + button_backlight_default: button-backlight-default-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hall_sensor_default: hall-sensor-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_default: nfc-default-state { + pins = "gpio122", "gpio140"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_sleep: nfc-sleep-state { + int-pins { + pins = "gpio140"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + ven-pins { + pins = "gpio122"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_sleep: sdc2-cd-sleep-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_int_sleep: ts-int-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_reset_default: ts-reset-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_sleep: ts-sleep-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + volume_up_default: volume-up-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index e2ac2fd6882f..f9962512f243 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -782,6 +782,42 @@ bias-disable; }; + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + wcss_wlan_default: wcss-wlan-default-state { wcss-wlan2-pins { pins = "gpio40"; @@ -1331,6 +1367,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; + qcom,controlled-remotely; }; blsp1_uart1: serial@78af000 { @@ -1451,6 +1488,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; + qcom,controlled-remotely; }; blsp2_uart2: serial@7af0000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index ede851fbf628..f91605de4909 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1910,8 +1910,22 @@ device_type = "pci"; - interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1973,8 +1987,22 @@ device_type = "pci"; - interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2034,8 +2062,22 @@ device_type = "pci"; - interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 58cee37cb8ee..0b0a9379cb05 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -936,8 +936,24 @@ <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; #interrupt-cells = <1>; - interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index f49ac1c1f8a3..fa24b77a31a7 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -1628,6 +1628,109 @@ #iommu-cells = <2>; }; + camss: camss@5c6e000 { + compatible = "qcom,qcm2290-camss"; + + reg = <0x0 0x5c6e000 0x0 0x1000>, + <0x0 0x5c75000 0x0 0x1000>, + <0x0 0x5c52000 0x0 0x1000>, + <0x0 0x5c53000 0x0 0x1000>, + <0x0 0x5c66000 0x0 0x400>, + <0x0 0x5c68000 0x0 0x400>, + <0x0 0x5c11000 0x0 0x1000>, + <0x0 0x5c6f000 0x0 0x4000>, + <0x0 0x5c76000 0x0 0x4000>; + reg-names = "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "top", + "vfe0", + "vfe1"; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMSS_AXI_CLK>, + <&gcc GCC_CAMSS_NRT_AXI_CLK>, + <&gcc GCC_CAMSS_RT_AXI_CLK>, + <&gcc GCC_CAMSS_TFE_0_CSID_CLK>, + <&gcc GCC_CAMSS_TFE_1_CSID_CLK>, + <&gcc GCC_CAMSS_CPHY_0_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CPHY_1_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_TFE_0_CLK>, + <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>, + <&gcc GCC_CAMSS_TFE_1_CLK>, + <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ; + clock-names = "ahb", + "axi", + "camnoc_nrt_axi", + "camnoc_rt_axi", + "csi0", + "csi1", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "top_ahb", + "vfe0", + "vfe0_cphy_rx", + "vfe1", + "vfe1_cphy_rx"; + + interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "vfe0", + "vfe1"; + + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>, + <&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "ahb", + "hf_mnoc", + "sf_mnoc"; + + iommus = <&apps_smmu 0x400 0x0>, + <&apps_smmu 0x800 0x0>, + <&apps_smmu 0x820 0x0>, + <&apps_smmu 0x840 0x0>; + + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + }; + }; + mdss: display-subsystem@5e00000 { compatible = "qcom,qcm2290-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 2b5aa3c66867..a6652e4817d1 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -240,6 +240,18 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcs615/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs615/cdsp.mbn"; + + status = "okay"; +}; + &rpmhcc { clocks = <&xo_board_clk>; }; diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi index bb8b6c3ebd03..bfbb21035492 100644 --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi @@ -332,6 +332,50 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + /* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */ + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-shared; @@ -429,6 +473,16 @@ no-map; hwlocks = <&tcsr_mutex 3>; }; + + rproc_cdsp_mem: rproc-cdsp@93b00000 { + reg = <0x0 0x93b00000 0x0 0x1e00000>; + no-map; + }; + + rproc_adsp_mem: rproc-adsp@95900000 { + reg = <0x0 0x95900000 0x0 0x1e00000>; + no-map; + }; }; soc: soc@0 { @@ -1902,6 +1956,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + status = "disabled"; in-ports { port { @@ -2461,6 +2516,9 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + + /* Not all required clocks can be enabled from the OS */ + status = "fail"; }; cti@6c20000 { @@ -3073,6 +3131,44 @@ clock-names = "apb_pclk"; }; + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>; + power-domain-names = "cx"; + + memory-region = <&rproc_cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 4>; + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + pmu@90b6300 { compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x0 0x090b6300 0x0 0x600>; @@ -3245,6 +3341,20 @@ reg = <0x0 0x0c3f0000 0x0 0x400>; }; + sram@14680000 { + compatible = "qcom,qcs615-imem", "syscon", "simple-mfd"; + reg = <0x0 0x14680000 0x0 0x2c000>; + ranges = <0 0 0x14680000 0x2c000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@2a94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x2a94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,qcs615-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x80000>; @@ -3692,6 +3802,44 @@ maximum-speed = "high-speed"; }; }; + + remoteproc_adsp: remoteproc@62400000 { + compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas"; + reg = <0x0 0x62400000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>; + power-domain-names = "cx"; + + memory-region = <&rproc_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink_edge: glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 24>; + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; }; arch_timer: timer { diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index 3ff8f398cad3..8c166ead912c 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -304,6 +304,10 @@ }; }; +&iris { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi index 009f9658a4fa..7ada029c32c1 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi @@ -4211,6 +4211,77 @@ }; }; + iris: video-codec@aa00000 { + compatible = "qcom,qcs8300-iris"; + + reg = <0x0 0x0aa00000 0x0 0xf0000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MX>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "bus"; + + iommus = <&apps_smmu 0x0880 0x0400>, + <&apps_smmu 0x0887 0x0400>; + dma-coherent; + + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + required-opps = <&rpmhpd_opp_turbo_l1>, + <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + videocc: clock-controller@abf0000 { compatible = "qcom,qcs8300-videocc"; reg = <0x0 0x0abf0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso index 5fe331923dd3..771baf7e09e6 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso @@ -9,10 +9,6 @@ #include <dt-bindings/clock/qcom,camcc-sm8250.h> #include <dt-bindings/gpio/gpio.h> -&camcc { - status = "okay"; -}; - &camss { vdda-phy-supply = <&vreg_l5a_0p88>; vdda-pll-supply = <&vreg_l9a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi index 3ae416ab66e8..63b3031cfcc1 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -28,6 +28,64 @@ stdout-path = "serial0:115200n8"; }; + vreg_12p0: vreg-12p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_12P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vreg_5p0: vreg-5p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_5P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vreg_12p0>; + }; + + vreg_1p8: vreg-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_5p0>; + }; + + vreg_1p0: vreg-1p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + vin-supply = <&vreg_1p8>; + }; + + vreg_3p0: vreg-3p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&vreg_12p0>; + }; + vreg_conn_1p8: vreg_conn_1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; @@ -128,6 +186,30 @@ }; }; }; + + dp-dsi0-connector { + compatible = "dp-connector"; + label = "DSI0"; + type = "full-size"; + + port { + dp_dsi0_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge0_out>; + }; + }; + }; + + dp-dsi1-connector { + compatible = "dp-connector"; + label = "DSI1"; + type = "full-size"; + + port { + dp_dsi1_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge1_out>; + }; + }; + }; }; &apps_rsc { @@ -513,6 +595,113 @@ &i2c18 { clock-frequency = <400000>; + + status = "okay"; + + io_expander: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + interrupts-extended = <&tlmm 98 IRQ_TYPE_EDGE_BOTH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&io_expander_intr_active>, + <&io_expander_reset_active>; + pinctrl-names = "default"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + + #size-cells = <0>; + reg = <0x70>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 2 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&io_expander 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge0_in: endpoint { + remote-endpoint = <&mdss0_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge0_out: endpoint { + remote-endpoint = <&dp_dsi0_connector_in>; + }; + }; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 10 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&io_expander 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&io_expander 8 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge1_in: endpoint { + remote-endpoint = <&mdss0_dsi1_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge1_out: endpoint { + remote-endpoint = <&dp_dsi1_connector_in>; + }; + }; + }; + }; + }; + }; + +}; + +&iris { + firmware-name = "qcom/vpu/vpu30_p4_s6.mbn"; + status = "okay"; }; @@ -560,6 +749,40 @@ status = "okay"; }; +&mdss0_dsi0 { + vdda-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&mdss0_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&dsi2dp_bridge0_in>; +}; + +&mdss0_dsi0_phy { + vdds-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&mdss0_dsi1 { + vdda-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&mdss0_dsi1_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&dsi2dp_bridge1_in>; +}; + +&mdss0_dsi1_phy { + vdds-supply = <&vreg_l4a>; + + status = "okay"; +}; + &pmm8654au_0_gpios { gpio-line-names = "DS_EN", "POFF_COMPLETE", @@ -753,6 +976,21 @@ }; }; + io_expander_intr_active: io-expander-intr-active-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + io_expander_reset_active: io-expander-reset-active-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + pcie0_default_state: pcie0-default-state { perst-pins { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 45f536633f64..fed34717460f 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -6,11 +6,14 @@ #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sa8775p-dispcc.h> #include <dt-bindings/clock/qcom,sa8775p-gcc.h> #include <dt-bindings/clock/qcom,sa8775p-gpucc.h> +#include <dt-bindings/clock/qcom,sa8775p-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/firmware/qcom,scm.h> @@ -51,6 +54,11 @@ next-level-cache = <&l2_0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -75,6 +83,11 @@ next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -94,6 +107,11 @@ next-level-cache = <&l2_2>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_2: l2-cache { compatible = "cache"; cache-level = <2>; @@ -113,6 +131,11 @@ next-level-cache = <&l2_3>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_3: l2-cache { compatible = "cache"; cache-level = <2>; @@ -132,6 +155,11 @@ next-level-cache = <&l2_4>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_4: l2-cache { compatible = "cache"; cache-level = <2>; @@ -157,6 +185,11 @@ next-level-cache = <&l2_5>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_5: l2-cache { compatible = "cache"; cache-level = <2>; @@ -176,6 +209,11 @@ next-level-cache = <&l2_6>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_6: l2-cache { compatible = "cache"; cache-level = <2>; @@ -195,6 +233,11 @@ next-level-cache = <&l2_7>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_7: l2-cache { compatible = "cache"; cache-level = <2>; @@ -284,6 +327,176 @@ }; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1939200000 { + opp-hz = /bits/ 64 <1939200000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1939200000 { + opp-hz = /bits/ 64 <1939200000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>; + }; + }; + dummy-sink { compatible = "arm,coresight-dummy-sink"; @@ -4049,6 +4262,76 @@ interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; }; + iris: video-codec@aa00000 { + compatible = "qcom,sa8775p-iris", "qcom,sm8550-iris"; + + reg = <0x0 0x0aa00000 0x0 0xf0000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd SA8775P_MX>, + <&rpmhpd SA8775P_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&pil_video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "bus"; + + iommus = <&apps_smmu 0x0880 0x0400>, + <&apps_smmu 0x0887 0x0400>; + dma-coherent; + + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + required-opps = <&rpmhpd_opp_turbo_l1>, + <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + videocc: clock-controller@abf0000 { compatible = "qcom,sa8775p-videocc"; reg = <0x0 0x0abf0000 0x0 0x10000>; @@ -4156,6 +4439,22 @@ remote-endpoint = <&mdss0_dp1_in>; }; }; + + port@2 { + reg = <2>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss0_dsi0_in>; + }; + }; + + port@3 { + reg = <3>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss0_dsi1_in>; + }; + }; }; mdss0_mdp_opp_table: opp-table { @@ -4183,6 +4482,161 @@ }; }; + mdss0_dsi0: dsi@ae94000 { + compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss0>; + interrupts = <4>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_ESC0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>; + phys = <&mdss0_dsi0_phy>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dsi0_out: endpoint{ }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss0_dsi0_phy: phy@ae94400 { + compatible = "qcom,sa8775p-dsi-phy-5nm"; + reg = <0x0 0x0ae94400 0x0 0x200>, + <0x0 0x0ae94600 0x0 0x280>, + <0x0 0x0ae94900 0x0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss0_dsi1: dsi@ae96000 { + compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae96000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss0>; + interrupts = <5>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_ESC1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>; + phys = <&mdss0_dsi1_phy>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dsi1_out: endpoint { }; + }; + }; + }; + + mdss0_dsi1_phy: phy@ae96400 { + compatible = "qcom,sa8775p-dsi-phy-5nm"; + reg = <0x0 0x0ae96400 0x0 0x200>, + <0x0 0x0ae96600 0x0 0x280>, + <0x0 0x0ae96900 0x0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + mdss0_dp0_phy: phy@aec2a00 { compatible = "qcom,sa8775p-edp-phy"; @@ -4389,7 +4843,10 @@ <&sleep_clk>, <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>, <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>, - <0>, <0>, <0>, <0>; + <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>; power-domains = <&rpmhpd SA8775P_MMCX>; #clock-cells = <1>; #reset-cells = <1>; @@ -5548,6 +6005,15 @@ }; }; + epss_l3_cl0: interconnect@18590000 { + compatible = "qcom,sa8775p-epss-l3", + "qcom,epss-l3"; + reg = <0x0 0x18590000 0x0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@18591000 { compatible = "qcom,sa8775p-cpufreq-epss", "qcom,cpufreq-epss"; @@ -5565,14 +6031,23 @@ #freq-domain-cells = <1>; }; + epss_l3_cl1: interconnect@18592000 { + compatible = "qcom,sa8775p-epss-l3", + "qcom,epss-l3"; + reg = <0x0 0x18592000 0x0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + remoteproc_gpdsp0: remoteproc@20c00000 { compatible = "qcom,sa8775p-gpdsp0-pas"; reg = <0x0 0x20c00000 0x0 0x10000>; interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, <&smp2p_gpdsp0_in 0 0>, - <&smp2p_gpdsp0_in 2 0>, <&smp2p_gpdsp0_in 1 0>, + <&smp2p_gpdsp0_in 2 0>, <&smp2p_gpdsp0_in 3 0>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -5614,8 +6089,8 @@ interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>, <&smp2p_gpdsp1_in 0 0>, - <&smp2p_gpdsp1_in 2 0>, <&smp2p_gpdsp1_in 1 0>, + <&smp2p_gpdsp1_in 2 0>, <&smp2p_gpdsp1_in 3 0>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -5755,8 +6230,8 @@ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -5887,8 +6362,8 @@ interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -6043,8 +6518,8 @@ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -7120,9 +7595,17 @@ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, @@ -7278,9 +7761,17 @@ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi index b0e342810ae7..e400ea4cdee8 100644 --- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi +++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi @@ -1289,7 +1289,8 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1297,7 +1298,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1406,7 +1408,8 @@ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1414,7 +1417,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 01e727b021ec..3afb69921be3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -3526,18 +3526,18 @@ #interrupt-cells = <4>; }; - sram@146aa000 { + sram@14680000 { compatible = "qcom,sc7180-imem", "syscon", "simple-mfd"; - reg = <0 0x146aa000 0 0x2000>; + reg = <0 0x14680000 0 0x2e000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0x146aa000 0x2000>; + ranges = <0 0 0x14680000 0x2e000>; - pil-reloc@94c { + pil-reloc@2a94c { compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; + reg = <0x2a94c 0xc8>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index b1cc3bc1aec8..64a2abd30100 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2227,9 +2227,17 @@ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index b84e47a461a0..f4f1d6a11960 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,gcc-sc8180x.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8180x-camcc.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8180x.h> @@ -1726,7 +1727,8 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1734,7 +1736,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1747,17 +1750,13 @@ <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -1847,7 +1846,8 @@ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1855,7 +1855,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1868,17 +1869,13 @@ <&gcc GCC_PCIE_3_CFG_AHB_CLK>, <&gcc GCC_PCIE_3_MSTR_AXI_CLK>, <&gcc GCC_PCIE_3_SLV_AXI_CLK>, - <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_3_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -1969,7 +1966,8 @@ <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1977,7 +1975,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1990,17 +1989,13 @@ <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2091,7 +2086,8 @@ <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -2099,7 +2095,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2112,17 +2109,13 @@ <&gcc GCC_PCIE_2_CFG_AHB_CLK>, <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_AXI_CLK>, - <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_2_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2934,6 +2927,19 @@ }; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc8180x-camcc"; + reg = <0 0x0ad00000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8180X_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sc8180x-mdss"; reg = <0 0x0ae00000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 3bc8471c658b..c0f466d96630 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2327,8 +2327,24 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2436,8 +2452,24 @@ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -5081,18 +5113,18 @@ #interrupt-cells = <4>; }; - sram@146bf000 { + sram@14680000 { compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; - reg = <0 0x146bf000 0 0x1000>; + reg = <0 0x14680000 0 0x40000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0x146bf000 0x1000>; + ranges = <0 0 0x14680000 0x40000>; - pil-reloc@94c { + pil-reloc@3f94c { compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; + reg = <0x3f94c 0xc8>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 3b28c543fd96..8ef6db3be6e3 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -624,6 +624,12 @@ }; }; +&slpi_pas { + firmware-name = "qcom/sdm850/LENOVO/81JL/qcslpi850.mbn"; + + status = "okay"; +}; + &sound { compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; model = "Lenovo-YOGA-C630-13Q50"; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index c8865779173e..91fc36b59abf 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -721,6 +721,13 @@ bias-pull-up; }; + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; @@ -1565,6 +1572,8 @@ reg = <0x0 0x04a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index f80b21d28a92..ff1eb2c53e7b 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -19,7 +19,9 @@ #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include <dt-bindings/thermal/thermal.h> / { @@ -1320,6 +1322,63 @@ label = "lpass"; qcom,remote-pid = <2>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1001 0x0>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -1953,6 +2012,20 @@ }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm6350-videocc"; + reg = <0x0 0x0aaf0000 0x0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "iface", + "bi_tcxo", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + cci0: cci@ac4a000 { compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; reg = <0x0 0x0ac4a000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index cdb47359c4c8..abf12e10d33f 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1853,7 +1853,8 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1861,7 +1862,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1874,17 +1876,13 @@ <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "tbu", - "ref"; + "slave_q2a"; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1970,7 +1968,8 @@ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1978,7 +1977,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1991,17 +1991,13 @@ <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "tbu", - "ref"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index f0d18fd37aaf..b30aea8b0540 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2150,7 +2150,8 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -2158,7 +2159,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2270,7 +2272,8 @@ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -2278,7 +2281,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2395,7 +2399,8 @@ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -2403,7 +2408,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -4653,7 +4659,6 @@ clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; - status = "disabled"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 971c828a7555..9a4207ead615 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1538,7 +1538,8 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1546,7 +1547,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1647,7 +1649,8 @@ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -1655,7 +1658,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 54c6d0fdb2af..33574ad706b9 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3739,6 +3739,7 @@ sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 71a7e3b57ece..45713d46f3c5 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -3406,6 +3406,216 @@ }; }; + camss: isp@acb7000 { + compatible = "qcom,sm8550-camss"; + + reg = <0x0 0x0acb7000 0x0 0x0d00>, + <0x0 0x0acb9000 0x0 0x0d00>, + <0x0 0x0acbb000 0x0 0x0d00>, + <0x0 0x0acca000 0x0 0x0a00>, + <0x0 0x0acce000 0x0 0x0a00>, + <0x0 0x0acb6000 0x0 0x1000>, + <0x0 0x0ace4000 0x0 0x2000>, + <0x0 0x0ace6000 0x0 0x2000>, + <0x0 0x0ace8000 0x0 0x2000>, + <0x0 0x0acea000 0x0 0x2000>, + <0x0 0x0acec000 0x0 0x2000>, + <0x0 0x0acee000 0x0 0x2000>, + <0x0 0x0acf0000 0x0 0x2000>, + <0x0 0x0acf2000 0x0 0x2000>, + <0x0 0x0ac62000 0x0 0xf000>, + <0x0 0x0ac71000 0x0 0xf000>, + <0x0 0x0ac80000 0x0 0xf000>, + <0x0 0x0accb000 0x0 0x1800>, + <0x0 0x0accf000 0x0 0x1800>; + reg-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csid_wrapper", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csiphy6", + "csiphy7", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>, + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>, + <&camcc CAM_CC_CPAS_IFE_0_CLK>, + <&camcc CAM_CC_CPAS_IFE_1_CLK>, + <&camcc CAM_CC_CPAS_IFE_2_CLK>, + <&camcc CAM_CC_CSID_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY6_CLK>, + <&camcc CAM_CC_CSI6PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY7_CLK>, + <&camcc CAM_CC_CSI7PHYTIMER_CLK>, + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_2_CLK>, + <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cpas_fast_ahb_clk", + "cpas_ife_lite", + "cpas_vfe0", + "cpas_vfe1", + "cpas_vfe2", + "csid", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "csiphy6", + "csiphy6_timer", + "csiphy7", + "csiphy7_timer", + "csiphy_rx", + "gcc_axi_hf", + "vfe0", + "vfe0_fast_ahb", + "vfe1", + "vfe1_fast_ahb", + "vfe2", + "vfe2_fast_ahb", + "vfe_lite", + "vfe_lite_ahb", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csiphy6", + "csiphy7", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ahb", + "hf_0_mnoc"; + + iommus = <&apps_smmu 0x800 0x20>; + + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_IFE_2_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "ife0", + "ife1", + "ife2", + "top"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + }; + + port@5 { + reg = <5>; + }; + + port@6 { + reg = <6>; + }; + + port@7 { + reg = <7>; + }; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,sm8550-camcc"; reg = <0 0x0ade0000 0 0x20000>; @@ -4024,6 +4234,7 @@ sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts index d0912735b54e..259649d7dcd7 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -894,6 +894,10 @@ status = "okay"; }; +&iris { + status = "okay"; +}; + &gpu { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index 76ef43c10f77..8a957adbfb38 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -585,6 +585,10 @@ }; }; +&iris { + status = "okay"; +}; + &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio21"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 71033fba21b5..7552d5d3fb40 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -824,6 +824,10 @@ status = "okay"; }; +&iris { + status = "okay"; +}; + &gpu { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 495ea9bfd008..e14d3d778b71 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -4962,6 +4962,99 @@ }; }; + iris: video-codec@aa00000 { + compatible = "qcom,sm8650-iris"; + reg = <0 0x0aa00000 0 0xf0000>; + + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&videocc VIDEO_CC_XO_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_CLK_ARES>; + reset-names = "bus", + "xo", + "core"; + + iommus = <&apps_smmu 0x1940 0>, + <&apps_smmu 0x1947 0>; + + dma-coherent; + + /* + * IRIS firmware is signed by vendors, only + * enable in boards where the proper signed firmware + * is available. + */ + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-196000000 { + opp-hz = /bits/ 64 <196000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>, + <&rpmhpd_opp_low_svs_d1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs>, + <&rpmhpd_opp_svs>; + }; + + opp-435000000 { + opp-hz = /bits/ 64 <435000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-533333334 { + opp-hz = /bits/ 64 <533333334>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + }; + }; + videocc: clock-controller@aaf0000 { compatible = "qcom,sm8650-videocc"; reg = <0 0x0aaf0000 0 0x10000>; @@ -5732,6 +5825,7 @@ sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { @@ -6868,8 +6962,7 @@ compatible = "qcom,rpmh-rsc"; reg = <0 0x17a00000 0 0x10000>, <0 0x17a10000 0 0x10000>, - <0 0x17a20000 0 0x10000>, - <0 0x17a30000 0 0x10000>; + <0 0x17a20000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts index 72f081a890df..75cfbb510be5 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts @@ -29,6 +29,33 @@ serial0 = &uart7; }; + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + vdd-px-supply = <&vreg_l2i_1p2>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -81,6 +108,89 @@ }; }; + sound { + compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard"; + model = "SM8750-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", /* MIC4 on schematics */ + "VA DMIC1", "MIC BIAS3", /* MIC1 on schematics */ + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "VA DMIC2", "VA MIC BIAS1", + "VA DMIC3", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -702,6 +812,14 @@ }; }; +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + &pm8550_flash { status = "okay"; @@ -806,6 +924,74 @@ status = "fail"; }; +&swr0 { + status = "okay"; + + /* WSA883x, left/front speaker */ + left_spkr: speaker@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_l15b_1p8>; + }; + + /* WSA883x, right/back speaker */ + right_spkr: speaker@0,2 { + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_l15b_1p8>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { /* reserved for secure world */ gpio-reserved-ranges = <36 4>, <74 1>; @@ -814,3 +1000,50 @@ &uart7 { status = "okay"; }; + +/* Pinctrl */ +&lpass_tlmm { + spkr_0_sd_n_active: spkr-0-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&tlmm { + wcd_default: wcd-reset-n-active-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1j_0p91>; + vdda-pll-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1d_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts index 840a6d8f8a24..13c7b9664c89 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts @@ -28,6 +28,37 @@ serial0 = &uart7; }; + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + /* + * Mismatch with schematics - downstream DTS has L15B at 1.8 V, + * schematics L2I at 1.2 V + */ + vdd-px-supply = <&vreg_l15b_1p8>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -80,6 +111,88 @@ }; }; + sound { + compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard"; + model = "SM8750-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT2", "ADC3_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -803,11 +916,141 @@ status = "okay"; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l2i_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l2i_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { /* reserved for secure world */ gpio-reserved-ranges = <36 4>, <74 1>; + + spkr_0_sd_n_active: spkr-0-sd-n-active-state { + pins = "gpio76"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { status = "okay"; }; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1j_0p91>; + vdda-pll-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1d_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index 980ba1ca23c4..4643705021c6 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,sm8750-gcc.h> #include <dt-bindings/clock/qcom,sm8750-tcsr.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -177,7 +178,6 @@ exit-latency-us = <130>; min-residency-us = <686>; }; - }; domain-idle-states { @@ -1986,7 +1986,6 @@ interconnect-names = "qup-core", "qup-config"; - pinctrl-0 = <&qup_uart7_default>; pinctrl-names = "default"; @@ -2027,7 +2026,6 @@ #interconnect-cells = <2>; clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; - }; aggre1_noc: interconnect@16e0000 { @@ -2037,7 +2035,6 @@ #interconnect-cells = <2>; clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; - }; aggre2_noc: interconnect@1700000 { @@ -2257,6 +2254,36 @@ #sound-dai-cells = <1>; }; + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x06ab0000 0x0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_rxmacro: codec@6ac0000 { compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; reg = <0x0 0x06ac0000 0x0 0x1000>; @@ -2274,6 +2301,36 @@ #sound-dai-cells = <1>; }; + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x06ad0000 0x0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <1>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0x31 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0x0f 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0x18 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0x01 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_txmacro: codec@6ae0000 { compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; reg = <0x0 0x06ae0000 0x0 0x1000>; @@ -2308,6 +2365,36 @@ #sound-dai-cells = <1>; }; + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x06b10000 0x0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_ag_noc: interconnect@7e40000 { compatible = "qcom,sm8750-lpass-ag-noc"; reg = <0x0 0x07e40000 0x0 0xe080>; @@ -2329,6 +2416,38 @@ #interconnect-cells = <2>; }; + swr2: soundwire@7630000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x07630000 0x0 0x10000>; + interrupts = <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + label = "TX"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_vamacro: codec@7660000 { compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; reg = <0x0 0x07660000 0x0 0x2000>; @@ -2490,6 +2609,7 @@ sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0x0 0x0c3f0000 0x0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { @@ -3184,6 +3304,108 @@ }; }; + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8750-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsrcc TCSR_UFS_CLKREF_EN>; + + clock-names = "ref", + "ref_aux", + "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8750-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_LN_BB_CLK3>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + operating-points-v2 = <&ufs_opp_table>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0>; + dma-coherent; + + lanes-per-direction = <2>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-403000000 { + opp-hz = /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + apps_rsc: rsc@16500000 { compatible = "qcom,rpmh-rsc"; reg = <0x0 0x16500000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi new file mode 100644 index 000000000000..c771fd1d8029 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi @@ -0,0 +1,1496 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100-pmics.dtsi" + +/ { + model = "ASUS Zenbook A14"; + chassis-type = "laptop"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + label = "lid"; + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Left-side display-adjacent port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* Left-side user-adjacent port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-ASUS-Zenbook-A14"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS1", + "VA DMIC1", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, + <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, + <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, + <&swr0 0>, <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vreg_vph_pwr>; + vdd-bob2-supply = <&vreg_vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vreg_vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vreg_vph_pwr>; + vdd-s2-supply = <&vreg_vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vreg_vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p9: ldo1 { + regulator-name = "vreg_l1j_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + /* ELAN, 04F3:3315 */ + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + /* Left-side display-adjacent port */ + typec-mux@8 { + compatible = "parade,ps8833", "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + status = "okay"; + + /* ASUSTeK, 0B05:4543 */ + hdtl@17 { + compatible = "hid-over-i2c"; + reg = <0x17>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hdtl_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; + + /* EC @0x5b */ +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + /* Left-side user-adjacent port */ + typec-mux@8 { + compatible = "parade,ps8833", "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + /* ASUSTeK, 0B05:0220 */ + keyboard@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + drive-push-pull; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&spi10 { + status = "disabled"; + + /* Unknown device */ +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>, /* SPI11, TZ Protected */ + <90 1>; /* Unknown, TZ Protected */ + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + hdtl_default: hdtl-default-state { + pins = "gpio95"; + function = "gpio"; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcn_bt_en: wcn-bt-en-state { + pins = "gpio116"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_en: wcn-wlan-en-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p9>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts new file mode 100644 index 000000000000..0d0bcc50207d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> + */ + +/dts-v1/; + +#include "x1e80100.dtsi" +#include "x1-asus-zenbook-a14.dtsi" + +/ { + model = "ASUS Zenbook A14 (UX3407RA)"; + compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", + "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", + "qcom/x1e80100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 967f6dba0878..fd00d1bf12e1 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -22,6 +22,7 @@ aliases { serial0 = &uart21; + serial1 = &uart14; }; gpio-keys { @@ -288,6 +289,101 @@ regulator-always-on; regulator-boot-on; }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -744,8 +840,21 @@ &i2c9 { clock-frequency = <400000>; - status = "disabled"; - /* USB3 retimer device @0x4f */ + status = "okay"; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; }; &i2c17 { @@ -848,6 +957,23 @@ status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; @@ -967,6 +1093,14 @@ bias-disable; }; + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + hall_int_n_default: hall-int-n-state { pins = "gpio92"; function = "gpio"; @@ -1102,6 +1236,37 @@ drive-strength = <2>; }; }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; }; &uart21 { @@ -1172,3 +1337,37 @@ &usb_1_ss1_qmpphy_out { remote-endpoint = <&retimer_ss1_ss_in>; }; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index 10b3af5e79fb..8d2a9b7f4730 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -153,6 +153,14 @@ remote-endpoint = <&usb_1_ss1_qmpphy_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_sbu: endpoint { + remote-endpoint = <&usb_1_ss1_sbu_mux>; + }; + }; }; }; }; @@ -477,6 +485,25 @@ }; }; }; + + usb-1-ss1-sbu-mux { + compatible = "onnn,fsusb42", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb_1_ss1_sbu_default>; + pinctrl-names = "default"; + + mode-switch; + orientation-switch; + + port { + usb_1_ss1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_ss1_sbu>; + }; + }; + }; }; &apps_rsc { @@ -877,15 +904,6 @@ }; }; -&i2c1 { - clock-frequency = <400000>; - - status = "okay"; - - /* type-c PS8830 Retimer #2 0x8 */ - /* is active on Windows */ -}; - &i2c3 { clock-frequency = <400000>; @@ -943,14 +961,6 @@ }; }; -&i2c4 { - clock-frequency = <400000>; - - status = "okay"; - - /* is active on Windows */ -}; - &i2c5 { clock-frequency = <400000>; status = "okay"; @@ -991,14 +1001,6 @@ }; }; -&i2c9 { - clock-frequency = <400000>; - - status = "okay"; - - /* is active on Windows */ -}; - &lpass_tlmm { spkr_01_sd_n_active: spkr-01-sd-n-active-state { pins = "gpio12"; @@ -1193,17 +1195,6 @@ }; -&pmk8550_gpios { - edp_bl_pwm: edp-bl-pwm-state { - pins = "gpio5"; - function = "func3"; - }; -}; - -&pmk8550_pwm { - status = "okay"; -}; - &pmc8380_5_gpios { usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { pins = "gpio8"; @@ -1215,6 +1206,17 @@ }; }; +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + &qupv3_0 { status = "okay"; }; @@ -1419,6 +1421,30 @@ }; }; + usb_1_ss1_sbu_default: usb-1-ss1-sbu-state { + mode-pins { + pins = "gpio177"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; + }; + + oe-n-pins { + pins = "gpio179"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + sel-pins { + pins = "gpio178"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio191"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index a8eb4c5fe99f..a9a7bb676c6f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -3378,7 +3378,8 @@ <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -3386,7 +3387,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -3508,7 +3510,8 @@ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -3516,7 +3519,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -3636,7 +3640,8 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -3644,7 +3649,8 @@ "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -8548,7 +8554,7 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; - thermal-zones { + thermal_zones: thermal-zones { aoss0-thermal { thermal-sensors = <&tsens0 0>; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts new file mode 100644 index 000000000000..bd75ff898601 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com> + */ + +/dts-v1/; + +#include "x1p42100.dtsi" +#include "x1-asus-zenbook-a14.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + model = "ASUS Zenbook A14 (UX3407QA)"; + compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + vddaon-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_wcn_1p9>; + vddpcie1p3-supply = <&vreg_wcn_1p9>; + vddpcie1p9-supply = <&vreg_wcn_1p9>; + vddpmu-supply = <&vreg_wcn_0p95>; + vddpmucx-supply = <&vreg_wcn_0p95>; + vddpmumx-supply = <&vreg_wcn_0p95>; + vddrfa0p95-supply = <&vreg_wcn_0p95>; + vddrfa1p3-supply = <&vreg_wcn_1p9>; + vddrfa1p9-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + qcom,calibration-variant = "UX3407Q"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + max-speed = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1p42100.dtsi b/arch/arm64/boot/dts/qcom/x1p42100.dtsi index 27f479010bc3..9af9e707f982 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1p42100.dtsi @@ -18,6 +18,7 @@ /delete-node/ &cpu_pd10; /delete-node/ &cpu_pd11; /delete-node/ &pcie3_phy; +/delete-node/ &thermal_zones; &gcc { compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc"; @@ -79,3 +80,558 @@ status = "disabled"; }; }; + +/* While physically present, this controller is left unconfigured and unused */ +&tsens3 { + status = "disabled"; +}; + +/ { + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-top-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-btm-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-top-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-btm-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-top-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-btm-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-top-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-btm-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-top-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-btm-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-top-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-btm-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-top-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-btm-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-top-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-btm-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-top-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-btm-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-top-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-btm-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp0-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp1-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp2-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp3-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 5>; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 6>; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 7>; + + cooling-maps { + map0 { + trip = <&gpuss2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 8>; + + cooling-maps { + map0 { + trip = <&gpuss3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index aa7f996c0546..6093d5f6e548 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single-ard-audio-da7212.dtb DTC_FLAGS_r8a779g3-sparrow-hawk += -Wno-spi_bus_bridge dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtbo r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb @@ -105,6 +106,8 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single-ard-audio-da7212.dtb dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h0-gray-hawk-single.dtb +dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h2-gray-hawk-single.dtb + dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb r8a779m1-salvator-xs-panel-aa104xd12-dtbs := r8a779m1-salvator-xs.dtb salvator-panel-aa104xd12.dtbo dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs-panel-aa104xd12.dtb @@ -156,10 +159,25 @@ dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc-pmod1-type-3a.dtb dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb +dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc-cru-csi-ov5645.dtbo +r9a09g047e57-smarc-cru-csi-ov5645-dtbs := r9a09g047e57-smarc.dtb r9a09g047e57-smarc-cru-csi-ov5645.dtbo +dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc-cru-csi-ov5645.dtb dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk.dtb +dtb-$(CONFIG_ARCH_R9A09G056) += rzv2-evk-cn15-emmc.dtbo +r9a09g056n48-rzv2n-evk-cn15-emmc-dtbs := r9a09g056n48-rzv2n-evk.dtb rzv2-evk-cn15-emmc.dtbo +dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk-cn15-emmc.dtb +dtb-$(CONFIG_ARCH_R9A09G056) += rzv2-evk-cn15-sd.dtbo +r9a09g056n48-rzv2n-evk-cn15-sd-dtbs := r9a09g056n48-rzv2n-evk.dtb rzv2-evk-cn15-sd.dtbo +dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk-cn15-sd.dtb dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb +dtb-$(CONFIG_ARCH_R9A09G057) += rzv2-evk-cn15-emmc.dtbo +r9a09g057h44-rzv2h-evk-cn15-emmc-dtbs := r9a09g057h44-rzv2h-evk.dtb rzv2-evk-cn15-emmc.dtbo +dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-emmc.dtb +dtb-$(CONFIG_ARCH_R9A09G057) += rzv2-evk-cn15-sd.dtbo +r9a09g057h44-rzv2h-evk-cn15-sd-dtbs := r9a09g057h44-rzv2h-evk.dtb rzv2-evk-cn15-sd.dtbo +dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-sd.dtb dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi index a10584150571..9fe9c722187d 100644 --- a/arch/arm64/boot/dts/renesas/condor-common.dtsi +++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi @@ -174,6 +174,7 @@ &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -230,6 +231,7 @@ compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index 380b857fd273..71d9f277c966 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -308,6 +308,7 @@ &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; ak4613: codec@10 { @@ -449,6 +450,7 @@ compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 4f38b01ae18d..c4c86344fb90 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -327,9 +327,18 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + /* Please only enable canfd or can0 */ + /* status = "okay"; */ +}; + &canfd { pinctrl-0 = <&canfd0_pins>; pinctrl-names = "default"; + /* Please only enable canfd or can0 */ status = "okay"; channel0 { @@ -503,6 +512,7 @@ }; &i2c_dvfs { + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -526,6 +536,7 @@ compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; @@ -579,6 +590,11 @@ function = "avb"; }; + can0_pins: can0 { + groups = "can0_data"; + function = "can0"; + }; + canfd0_pins: canfd0 { groups = "canfd0_data"; function = "canfd0"; diff --git a/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi new file mode 100644 index 000000000000..2edb5cb3407b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi @@ -0,0 +1,866 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the Gray Hawk Single board + * + * Copyright (C) 2023 Renesas Electronics Corp. + * Copyright (C) 2024-2025 Glider bv + */ +/* + * [How to use Sound] + * + * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture + * at the same time. You need to switch the direction which is controlled + * by the GP0_01 pin via amixer. + * + * Playback (CN9500) + * > amixer set "MUX" "Playback" // for GP0_01 + * > amixer set "DAC 1" 85% + * > aplay xxx.wav + * + * Capture (CN9501) + * > amixer set "MUX" "Capture" // for GP0_01 + * > amixer set "Mic 1" 80% + * > amixer set "ADC 1" on + * > amixer set 'ADC 1' 80% + * > arecord xxx hoge.wav + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/video-interfaces.h> + +/ { + model = "Renesas Gray Hawk Single board"; + compatible = "renesas,gray-hawk-single"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &hscif0; + serial1 = &hscif2; + ethernet0 = &avb0; + ethernet1 = &avb1; + ethernet2 = &avb2; + }; + + can_transceiver0: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <5000000>; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:921600n8"; + }; + + sn65dsi86_refclk: clk-x6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x1 0x80000000>; + }; + + pcie_clk: clk-9fgv0841-pci { + compatible = "fixed-clock"; + clock-frequency = <100000000>; + #clock-cells = <0>; + }; + + mini-dp-con { + compatible = "dp-connector"; + label = "CN5"; + type = "mini"; + + port { + mini_dp_con_in: endpoint { + remote-endpoint = <&sn65dsi86_out0>; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sound_mux: sound-mux { + compatible = "simple-audio-mux"; + mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + state-labels = "Playback", "Capture"; + }; + + sound_card: sound { + compatible = "audio-graph-card2"; + label = "rcar-sound"; + aux-devs = <&sound_mux>; // for GP0_01 + + links = <&rsnd_port>; // AK4619 Audio Codec + }; +}; + +&audio_clkin { + clock-frequency = <24576000>; +}; + +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&avb0_phy>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + avb0_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&avb1 { + pinctrl-0 = <&avb1_pins>; + pinctrl-names = "default"; + phy-handle = <&avb1_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + avb1_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&avb2 { + pinctrl-0 = <&avb2_pins>; + pinctrl-names = "default"; + phy-handle = <&avb2_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + avb2_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&can_clk { + clock-frequency = <40000000>; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + phys = <&can_transceiver0>; + }; + + channel1 { + status = "okay"; + }; +}; + +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96724_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi41_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96724_out1>; + }; + }; + }; +}; + +&dsi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi0_out: endpoint { + remote-endpoint = <&sn65dsi86_in0>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&du { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio1 { + audio-power-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "Audio-Power"; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + bootph-all; + + uart-has-rtscts; + status = "okay"; +}; + +&hscif2 { + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander_a: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + io_expander_b: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander_c: gpio@22 { + compatible = "onnn,pca9654"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; + + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; + }; + + eeprom@52 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "csi-dsi-sub-board-id"; + reg = <0x52>; + pagesize = <8>; + }; + + eeprom@53 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "ethernet-sub-board-id"; + reg = <0x53>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + bridge@2c { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + + vccio-supply = <®_1p8v>; + vpll-supply = <®_1p8v>; + vcca-supply = <®_1p2v>; + vcc-supply = <®_1p2v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out0: endpoint { + remote-endpoint = <&mini_dp_con_in>; + }; + }; + }; + }; + + gmsl0: gmsl-deserializer@4e { + compatible = "maxim,max96724"; + reg = <0x4e>; + enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96724_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + + gmsl1: gmsl-deserializer@4f { + compatible = "maxim,max96724"; + reg = <0x4f>; + enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96724_out1: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + codec@10 { + compatible = "asahi-kasei,ak4619"; + reg = <0x10>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + #sound-dai-cells = <0>; + port { + ak4619_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; +}; + +&isp0 { + status = "okay"; +}; + +&isp1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&pcie0_clkref { + compatible = "gpio-gate-clock"; + clocks = <&pcie_clk>; + enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + /delete-property/ clock-frequency; +}; + +&pciec0 { + reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>; + pinctrl-names = "default"; + + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + }; + + avb1_pins: avb1 { + mux { + groups = "avb1_link", "avb1_mdio", "avb1_rgmii", + "avb1_txcrefclk"; + function = "avb1"; + }; + + link { + groups = "avb1_link"; + bias-disable; + }; + + mdio { + groups = "avb1_mdio"; + drive-strength = <24>; + bias-disable; + }; + + rgmii { + groups = "avb1_rgmii"; + drive-strength = <24>; + bias-disable; + }; + }; + + avb2_pins: avb2 { + mux { + groups = "avb2_link", "avb2_mdio", "avb2_rgmii", + "avb2_txcrefclk"; + function = "avb2"; + }; + + link { + groups = "avb2_link"; + bias-disable; + }; + + mdio { + groups = "avb2_mdio"; + drive-strength = <24>; + bias-disable; + }; + + rgmii { + groups = "avb2_rgmii"; + drive-strength = <24>; + bias-disable; + }; + }; + + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data", "hscif2_ctrl"; + function = "hscif2"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + + irq0_pins: irq0_pins { + groups = "intc_ex_irq0_a"; + function = "intc_ex"; + }; + + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif_clk_pins: scif-clk { + groups = "scif_clk"; + function = "scif_clk"; + }; + + scif_clk2_pins: scif-clk2 { + groups = "scif_clk2"; + function = "scif_clk2"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clkin", "audio_clkout"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi_ctrl", "ssi_data"; + function = "ssi"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* audio_clkout */ + clock-frequency = <12288000>; + + ports { + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&ak4619_endpoint>; + bitclock-master; + frame-master; + + /* see above [How to use Sound] */ + playback = <&ssi0>; + capture = <&ssi0>; + }; + }; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x0 0x1200000>; + read-only; + }; + user@1200000 { + reg = <0x1200000 0x2e00000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <24000000>; +}; + +&scif_clk2 { + clock-frequency = <24000000>; +}; + +&vin00 { + status = "okay"; +}; + +&vin01 { + status = "okay"; +}; + +&vin02 { + status = "okay"; +}; + +&vin03 { + status = "okay"; +}; + +&vin04 { + status = "okay"; +}; + +&vin05 { + status = "okay"; +}; + +&vin06 { + status = "okay"; +}; + +&vin07 { + status = "okay"; +}; + +&vin08 { + status = "okay"; +}; + +&vin09 { + status = "okay"; +}; + +&vin10 { + status = "okay"; +}; + +&vin11 { + status = "okay"; +}; + +&vin12 { + status = "okay"; +}; + +&vin13 { + status = "okay"; +}; + +&vin14 { + status = "okay"; +}; + +&vin15 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 6dbf05a55935..8d9ca30c299c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -798,6 +798,16 @@ <0 0 0 4 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; snps,enable-cdm-check; status = "disabled"; + + /* PCIe bridge, Root Port */ + pciec0_rp: pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + ranges; + }; }; pciec1: pcie@e65d8000 { @@ -835,6 +845,16 @@ <0 0 0 4 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; snps,enable-cdm-check; status = "disabled"; + + /* PCIe bridge, Root Port */ + pciec1_rp: pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + ranges; + }; }; pciec0_ep: pcie-ep@e65d0000 { diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts index 6955eafd8d6a..9ba23129e65e 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts @@ -130,6 +130,13 @@ }; }; + /* Page 26 / PCIe.0/1 CLK */ + pcie_refclk: clk-x8 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + reg_1p2v: regulator-1p2v { compatible = "regulator-fixed"; regulator-name = "fixed-1.2V"; @@ -404,6 +411,14 @@ reg = <2>; #address-cells = <1>; #size-cells = <0>; + + /* Page 26 / PCIe.0/1 CLK */ + pcie_clk: clk@68 { + compatible = "renesas,9fgv0441"; + reg = <0x68>; + clocks = <&pcie_refclk>; + #clock-cells = <1>; + }; }; i2c0_mux3: i2c@3 { @@ -487,26 +502,38 @@ /* Page 26 / 2230 Key M M.2 */ &pcie0_clkref { - clock-frequency = <100000000>; + status = "disabled"; }; &pciec0 { + clocks = <&cpg CPG_MOD 624>, <&pcie_clk 0>; reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; +&pciec0_rp { + clocks = <&pcie_clk 1>; + vpcie3v3-supply = <®_3p3v>; +}; + /* Page 25 / PCIe to USB */ &pcie1_clkref { - clock-frequency = <100000000>; + status = "disabled"; }; &pciec1 { + clocks = <&cpg CPG_MOD 625>, <&pcie_clk 2>; /* uPD720201 is PCIe Gen2 x1 device */ num-lanes = <1>; reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; status = "okay"; }; +&pciec1_rp { + clocks = <&pcie_clk 3>; + vpcie3v3-supply = <®_3p3v>; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; @@ -679,19 +706,6 @@ }; }; -/* Page 30 / Audio_Codec */ -&rcar_sound { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - /* It is used for ADG output as DA7212_MCLK */ - - /* audio_clkout */ - clock-frequency = <12288000>; /* 48 kHz groups */ - - status = "okay"; -}; - /* Page 31 / FAN */ &pwm0 { pinctrl-0 = <&pwm0_pins>; @@ -720,6 +734,19 @@ status = "okay"; }; +/* Page 30 / Audio_Codec */ +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + /* It is used for ADG output as DA7212_MCLK */ + + /* audio_clkout */ + clock-frequency = <12288000>; /* 48 kHz groups */ + + status = "okay"; +}; + /* Page 16 / QSPI_FLASH */ &rpc { pinctrl-0 = <&qspi0_pins>; diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts index 4d890e0617af..1be7836c41f4 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts +++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts @@ -5,866 +5,13 @@ * Copyright (C) 2023 Renesas Electronics Corp. * Copyright (C) 2024 Glider bv */ -/* - * [How to use Sound] - * - * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture - * at the same time. You need to switch the direction which is controlled - * by the GP0_01 pin via amixer. - * - * Playback (CN9500) - * > amixer set "MUX" "Playback" // for GP0_01 - * > amixer set "DAC 1" 85% - * > aplay xxx.wav - * - * Capture (CN9501) - * > amixer set "MUX" "Capture" // for GP0_01 - * > amixer set "Mic 1" 80% - * > amixer set "ADC 1" on - * > amixer set 'ADC 1' 80% - * > arecord xxx hoge.wav - */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/media/video-interfaces.h> - #include "r8a779h0.dtsi" +#include "gray-hawk-single.dtsi" / { model = "Renesas Gray Hawk Single board based on r8a779h0"; compatible = "renesas,gray-hawk-single", "renesas,r8a779h0"; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - serial0 = &hscif0; - serial1 = &hscif2; - ethernet0 = &avb0; - ethernet1 = &avb1; - ethernet2 = &avb2; - }; - - can_transceiver0: can-phy0 { - compatible = "nxp,tjr1443"; - #phy-cells = <0>; - enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - max-bitrate = <5000000>; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:921600n8"; - }; - - sn65dsi86_refclk: clk-x6 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW47"; - wakeup-source; - debounce-interval = <20>; - }; - - key-2 { - gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW48"; - wakeup-source; - debounce-interval = <20>; - }; - - key-3 { - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW49"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-1 { - gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; - - led-2 { - gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led-3 { - gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - memory@480000000 { - device_type = "memory"; - reg = <0x4 0x80000000 0x1 0x80000000>; - }; - - pcie_clk: clk-9fgv0841-pci { - compatible = "fixed-clock"; - clock-frequency = <100000000>; - #clock-cells = <0>; - }; - - mini-dp-con { - compatible = "dp-connector"; - label = "CN5"; - type = "mini"; - - port { - mini_dp_con_in: endpoint { - remote-endpoint = <&sn65dsi86_out0>; - }; - }; - }; - - reg_1p2v: regulator-1p2v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sound_mux: sound-mux { - compatible = "simple-audio-mux"; - mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - state-labels = "Playback", "Capture"; - }; - - sound_card: sound { - compatible = "audio-graph-card2"; - label = "rcar-sound"; - aux-devs = <&sound_mux>; // for GP0_01 - - links = <&rsnd_port>; // AK4619 Audio Codec - }; -}; - -&audio_clkin { - clock-frequency = <24576000>; -}; - -&avb0 { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - phy-handle = <&avb0_phy>; - tx-internal-delay-ps = <2000>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - avb0_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id0022.1622", - "ethernet-phy-ieee802.3-c22"; - rxc-skew-ps = <1500>; - reg = <0>; - interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&avb1 { - pinctrl-0 = <&avb1_pins>; - pinctrl-names = "default"; - phy-handle = <&avb1_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; - reset-post-delay-us = <4000>; - - avb1_phy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>; - }; - }; -}; - -&avb2 { - pinctrl-0 = <&avb2_pins>; - pinctrl-names = "default"; - phy-handle = <&avb2_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; - reset-post-delay-us = <4000>; - - avb2_phy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>; - }; - }; -}; - -&can_clk { - clock-frequency = <40000000>; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - phys = <&can_transceiver0>; - }; - - channel1 { - status = "okay"; - }; -}; - -&csi40 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi40_in: endpoint { - bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max96724_out0>; - }; - }; - }; -}; - -&csi41 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi41_in: endpoint { - bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max96724_out1>; - }; - }; - }; -}; - -&dsi0 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - - dsi0_out: endpoint { - remote-endpoint = <&sn65dsi86_in0>; - data-lanes = <1 2 3 4>; - }; - }; - }; -}; - -&du { - status = "okay"; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&gpio1 { - audio-power-hog { - gpio-hog; - gpios = <8 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "Audio-Power"; - }; -}; - -&hscif0 { - pinctrl-0 = <&hscif0_pins>; - pinctrl-names = "default"; - bootph-all; - - uart-has-rtscts; - status = "okay"; -}; - -&hscif2 { - pinctrl-0 = <&hscif2_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - io_expander_a: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - io_expander_b: gpio@21 { - compatible = "onnn,pca9654"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - }; - - io_expander_c: gpio@22 { - compatible = "onnn,pca9654"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - }; - - eeprom@50 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "cpu-board"; - reg = <0x50>; - pagesize = <8>; - }; - - eeprom@51 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "breakout-board"; - reg = <0x51>; - pagesize = <8>; - }; - - eeprom@52 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "csi-dsi-sub-board-id"; - reg = <0x52>; - pagesize = <8>; - }; - - eeprom@53 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "ethernet-sub-board-id"; - reg = <0x53>; - pagesize = <8>; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - bridge@2c { - pinctrl-0 = <&irq0_pins>; - pinctrl-names = "default"; - - compatible = "ti,sn65dsi86"; - reg = <0x2c>; - - clocks = <&sn65dsi86_refclk>; - clock-names = "refclk"; - - interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - - vccio-supply = <®_1p8v>; - vpll-supply = <®_1p8v>; - vcca-supply = <®_1p2v>; - vcc-supply = <®_1p2v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sn65dsi86_in0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - - sn65dsi86_out0: endpoint { - remote-endpoint = <&mini_dp_con_in>; - }; - }; - }; - }; - - gmsl0: gmsl-deserializer@4e { - compatible = "maxim,max96724"; - reg = <0x4e>; - enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@4 { - reg = <4>; - max96724_out0: endpoint { - bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - }; - }; - - gmsl1: gmsl-deserializer@4f { - compatible = "maxim,max96724"; - reg = <0x4f>; - enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@4 { - reg = <4>; - max96724_out1: endpoint { - bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi41_in>; - }; - }; - }; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - codec@10 { - compatible = "asahi-kasei,ak4619"; - reg = <0x10>; - - clocks = <&rcar_sound>; - clock-names = "mclk"; - - #sound-dai-cells = <0>; - port { - ak4619_endpoint: endpoint { - remote-endpoint = <&rsnd_endpoint>; - }; - }; - }; -}; - -&isp0 { - status = "okay"; -}; - -&isp1 { - status = "okay"; -}; - -&mmc0 { - pinctrl-0 = <&mmc_pins>; - pinctrl-1 = <&mmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - full-pwr-cycle-in-suspend; - status = "okay"; -}; - -&pcie0_clkref { - compatible = "gpio-gate-clock"; - clocks = <&pcie_clk>; - enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; - /delete-property/ clock-frequency; -}; - -&pciec0 { - reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>; - pinctrl-names = "default"; - - avb0_pins: avb0 { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_rgmii", - "avb0_txcrefclk"; - function = "avb0"; - }; - - pins_mdio { - groups = "avb0_mdio"; - drive-strength = <21>; - }; - - pins_mii { - groups = "avb0_rgmii"; - drive-strength = <21>; - }; - }; - - avb1_pins: avb1 { - mux { - groups = "avb1_link", "avb1_mdio", "avb1_rgmii", - "avb1_txcrefclk"; - function = "avb1"; - }; - - link { - groups = "avb1_link"; - bias-disable; - }; - - mdio { - groups = "avb1_mdio"; - drive-strength = <24>; - bias-disable; - }; - - rgmii { - groups = "avb1_rgmii"; - drive-strength = <24>; - bias-disable; - }; - }; - - avb2_pins: avb2 { - mux { - groups = "avb2_link", "avb2_mdio", "avb2_rgmii", - "avb2_txcrefclk"; - function = "avb2"; - }; - - link { - groups = "avb2_link"; - bias-disable; - }; - - mdio { - groups = "avb2_mdio"; - drive-strength = <24>; - bias-disable; - }; - - rgmii { - groups = "avb2_rgmii"; - drive-strength = <24>; - bias-disable; - }; - }; - - can_clk_pins: can-clk { - groups = "can_clk"; - function = "can_clk"; - }; - - canfd0_pins: canfd0 { - groups = "canfd0_data"; - function = "canfd0"; - }; - - canfd1_pins: canfd1 { - groups = "canfd1_data"; - function = "canfd1"; - }; - - hscif0_pins: hscif0 { - groups = "hscif0_data", "hscif0_ctrl"; - function = "hscif0"; - }; - - hscif2_pins: hscif2 { - groups = "hscif2_data", "hscif2_ctrl"; - function = "hscif2"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - i2c3_pins: i2c3 { - groups = "i2c3"; - function = "i2c3"; - }; - - irq0_pins: irq0_pins { - groups = "intc_ex_irq0_a"; - function = "intc_ex"; - }; - - keys_pins: keys { - pins = "GP_5_0", "GP_5_1", "GP_5_2"; - bias-pull-up; - }; - - mmc_pins: mmc { - groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; - function = "mmc"; - power-source = <1800>; - }; - - qspi0_pins: qspi0 { - groups = "qspi0_ctrl", "qspi0_data4"; - function = "qspi0"; - }; - - scif_clk_pins: scif-clk { - groups = "scif_clk"; - function = "scif_clk"; - }; - - scif_clk2_pins: scif-clk2 { - groups = "scif_clk2"; - function = "scif_clk2"; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clkin", "audio_clkout"; - function = "audio_clk"; - }; - - sound_pins: sound { - groups = "ssi_ctrl", "ssi_data"; - function = "ssi"; - }; -}; - -&rcar_sound { - pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; - pinctrl-names = "default"; - - status = "okay"; - - /* audio_clkout */ - clock-frequency = <12288000>; - - ports { - rsnd_port: port { - rsnd_endpoint: endpoint { - remote-endpoint = <&ak4619_endpoint>; - bitclock-master; - frame-master; - - /* see above [How to use Sound] */ - playback = <&ssi0>; - capture = <&ssi0>; - }; - }; - }; -}; - -&rpc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - compatible = "spansion,s25fs512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - reg = <0x0 0x1200000>; - read-only; - }; - user@1200000 { - reg = <0x1200000 0x2e00000>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif_clk { - clock-frequency = <24000000>; -}; - -&scif_clk2 { - clock-frequency = <24000000>; -}; - -&vin00 { - status = "okay"; -}; - -&vin01 { - status = "okay"; -}; - -&vin02 { - status = "okay"; -}; - -&vin03 { - status = "okay"; -}; - -&vin04 { - status = "okay"; -}; - -&vin05 { - status = "okay"; -}; - -&vin06 { - status = "okay"; -}; - -&vin07 { - status = "okay"; -}; - -&vin08 { - status = "okay"; -}; - -&vin09 { - status = "okay"; -}; - -&vin10 { - status = "okay"; -}; - -&vin11 { - status = "okay"; -}; - -&vin12 { - status = "okay"; -}; - -&vin13 { - status = "okay"; -}; - -&vin14 { - status = "okay"; -}; - -&vin15 { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts new file mode 100644 index 000000000000..aeb32c77099e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4M-7 Gray Hawk Single board + * + * Copyright (C) 2025 Glider bv + */ + +/dts-v1/; + +#include "r8a779h2.dtsi" +#include "gray-hawk-single.dtsi" + +/ { + model = "Renesas Gray Hawk Single board based on r8a779h2"; + compatible = "renesas,gray-hawk-single", "renesas,r8a779h2", + "renesas,r8a779h0"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779h2.dtsi b/arch/arm64/boot/dts/renesas/r8a779h2.dtsi new file mode 100644 index 000000000000..2707d2d36766 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779h2.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4M-7 (R8A779H2) SoC + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +#include "r8a779h0.dtsi" + +/ { + compatible = "renesas,r8a779h2", "renesas,r8a779h0"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi index 876f70fed433..e4fac7e0d764 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi @@ -280,6 +280,27 @@ resets = <&cpg 0x30>; }; + xspi: spi@11030000 { + compatible = "renesas,r9a09g047-xspi"; + reg = <0 0x11030000 0 0x10000>, + <0 0x20000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 0x9f>, + <&cpg CPG_MOD 0xa0>, + <&cpg CPG_CORE R9A09G047_SPI_CLK_SPI>, + <&cpg CPG_MOD 0xa1>; + clock-names = "ahb", "axi", "spi", "spix2"; + resets = <&cpg 0xa3>, <&cpg 0xa4>; + reset-names = "hresetn", "aresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif0: serial@11c01400 { compatible = "renesas,scif-r9a09g047", "renesas,scif-r9a09g057"; reg = <0 0x11c01400 0 0x400>; @@ -669,6 +690,284 @@ status = "disabled"; }; }; + + eth0: ethernet@15c30000 { + compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c30000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>, + <&cpg CPG_CORE R9A09G047_GBETH_0_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>, + <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + resets = <&cpg 0xb0>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + eth1: ethernet@15c40000 { + compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c40000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>, + <&cpg CPG_CORE R9A09G047_GBETH_1_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>, + <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + resets = <&cpg 0xb1>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + cru: video@16000000 { + compatible = "renesas,r9a09g047-cru"; + reg = <0 0x16000000 0 0x400>; + clocks = <&cpg CPG_MOD 0xd3>, + <&cpg CPG_MOD 0xd4>, + <&cpg CPG_MOD 0xd2>; + clock-names = "video", "apb", "axi"; + interrupts = <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 841 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "axi_mst_err", + "vd_addr_wend", "sd_addr_wend", + "vsd_addr_wend"; + resets = <&cpg 0xc5>, <&cpg 0xc6>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@16000400 { + compatible = "renesas,r9a09g047-csi2", "renesas,r9a09g057-csi2"; + reg = <0 0x16000400 0 0xc00>; + interrupts = <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xd3>, <&cpg CPG_MOD 0xd4>; + clock-names = "video", "apb"; + resets = <&cpg 0xc5>, <&cpg 0xc7>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso new file mode 100644 index 000000000000..0f18f68f8120 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G3E SMARC EVK with OV5645 camera + * connected to CSI and CRU enabled. + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h> + +#define OV5645_PARENT_I2C i2c0 +#include "rz-smarc-cru-csi-ov5645.dtsi" + +&ov5645 { + enable-gpios = <&pinctrl RZG3E_GPIO(D, 6) GPIO_ACTIVE_HIGH>; + reset-gpios = <&pinctrl RZG3E_GPIO(D, 7) GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts index 1f5e61a73c35..1e67f0a2a945 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts @@ -8,6 +8,7 @@ /dts-v1/; /* Switch selection settings */ +#define SW_LCD_EN 0 #define SW_GPIO8_CAN0_STB 0 #define SW_GPIO9_CAN1_STB 0 #define SW_LCD_EN 0 @@ -15,7 +16,16 @@ #define SW_SD0_DEV_SEL 0 #define SW_SDIO_M2E 0 +#define PMOD_GPIO4 0 +#define PMOD_GPIO6 0 +#define PMOD_GPIO7 0 + +#define KEY_1_GPIO RZG3E_GPIO(3, 1) +#define KEY_2_GPIO RZG3E_GPIO(8, 4) +#define KEY_3_GPIO RZG3E_GPIO(8, 5) + #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h> #include "r9a09g047e57.dtsi" #include "rzg3e-smarc-som.dtsi" @@ -74,6 +84,34 @@ }; #endif +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; +}; + +&keys { + key-sleep { + pinctrl-0 = <&nmi_pins>; + pinctrl-names = "default"; + + interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_SLEEP>; + label = "SLEEP"; + debounce-interval = <20>; + }; +#if PMOD_GPIO4 + /delete-node/ key-1; +#endif + +#if SW_LCD_EN || PMOD_GPIO6 + /delete-node/ key-2; +#endif + +#if SW_LCD_EN || PMOD_GPIO7 + /delete-node/ key-3; +#endif +}; + &pinctrl { canfd_pins: canfd { can1_pins: can1 { @@ -87,6 +125,15 @@ }; }; + i2c0_pins: i2c0 { + pinmux = <RZG3E_PORT_PINMUX(D, 4, 4)>, /* SCL0 */ + <RZG3E_PORT_PINMUX(D, 5, 4)>; /* SDA0 */ + }; + + nmi_pins: nmi { + pinmux = <RZG3E_PORT_PINMUX(S, 0, 0)>; /* NMI */ + }; + scif_pins: scif { pins = "SCIF_TXD", "SCIF_RXD"; renesas,output-impedance = <1>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi index 90964bd864cc..10d3b9727ea5 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi @@ -123,6 +123,35 @@ }; }; + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-630000000 { + opp-hz = /bits/ 64 <630000000>; + opp-microvolt = <800000>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-microvolt = <800000>; + }; + + opp-157500000 { + opp-hz = /bits/ 64 <157500000>; + opp-microvolt = <800000>; + }; + + opp-78750000 { + opp-hz = /bits/ 64 <78750000>; + opp-microvolt = <800000>; + }; + + opp-19687500 { + opp-hz = /bits/ 64 <19687500>; + opp-microvolt = <800000>; + }; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -177,6 +206,147 @@ resets = <&cpg 0x30>; }; + xspi: spi@11030000 { + compatible = "renesas,r9a09g056-xspi", "renesas,r9a09g047-xspi"; + reg = <0 0x11030000 0 0x10000>, + <0 0x20000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 0x9f>, + <&cpg CPG_MOD 0xa0>, + <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>, + <&cpg CPG_MOD 0xa1>; + clock-names = "ahb", "axi", "spi", "spix2"; + resets = <&cpg 0xa3>, <&cpg 0xa4>; + reset-names = "hresetn", "aresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ostm0: timer@11800000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x11800000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x43>; + resets = <&cpg 0x6d>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@11801000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x11801000 0x0 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x44>; + resets = <&cpg 0x6e>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@14000000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x14000000 0x0 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x45>; + resets = <&cpg 0x6f>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm3: timer@14001000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x14001000 0x0 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x46>; + resets = <&cpg 0x70>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm4: timer@12c00000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c00000 0x0 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x47>; + resets = <&cpg 0x71>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm5: timer@12c01000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c01000 0x0 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x48>; + resets = <&cpg 0x72>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm6: timer@12c02000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c02000 0x0 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x49>; + resets = <&cpg 0x73>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm7: timer@12c03000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c03000 0x0 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD 0x4a>; + resets = <&cpg 0x74>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt0: watchdog@11c00400 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x11c00400 0 0x400>; + clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x75>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt1: watchdog@14400000 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x14400000 0 0x400>; + clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x76>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt2: watchdog@13000000 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x13000000 0 0x400>; + clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x77>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt3: watchdog@13000400 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x13000400 0 0x400>; + clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x78>; + power-domains = <&cpg>; + status = "disabled"; + }; + scif: serial@11c01400 { compatible = "renesas,scif-r9a09g056", "renesas,scif-r9a09g057"; @@ -199,6 +369,217 @@ status = "disabled"; }; + i2c0: i2c@14400400 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14400400 0 0x400>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 507 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 506 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x94>; + resets = <&cpg 0x98>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@14400800 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14400800 0 0x400>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 508 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x95>; + resets = <&cpg 0x99>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@14400c00 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14400c00 0 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 511 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x96>; + resets = <&cpg 0x9a>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@14401000 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401000 0 0x400>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 512 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x97>; + resets = <&cpg 0x9b>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@14401400 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401400 0 0x400>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 515 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x98>; + resets = <&cpg 0x9c>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@14401800 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401800 0 0x400>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 517 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 516 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x99>; + resets = <&cpg 0x9d>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@14401c00 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401c00 0 0x400>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 519 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 518 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x9a>; + resets = <&cpg 0x9e>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@14402000 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14402000 0 0x400>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 521 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 520 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x9b>; + resets = <&cpg 0x9f>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@11c01000 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x11c01000 0 0x400>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 522 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x93>; + resets = <&cpg 0xa0>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gpu: gpu@14850000 { + compatible = "renesas,r9a09g056-mali", + "arm,mali-bifrost"; + reg = <0x0 0x14850000 0x0 0x10000>; + interrupts = <GIC_SPI 884 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 883 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu", "event"; + clocks = <&cpg CPG_MOD 0xf0>, + <&cpg CPG_MOD 0xf1>, + <&cpg CPG_MOD 0xf2>; + clock-names = "gpu", "bus", "bus_ace"; + resets = <&cpg 0xdd>, + <&cpg 0xde>, + <&cpg 0xdf>; + reset-names = "rst", "axi_rst", "ace_rst"; + power-domains = <&cpg>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + }; + gic: interrupt-controller@14900000 { compatible = "arm,gic-v3"; reg = <0x0 0x14900000 0 0x20000>, @@ -209,6 +590,72 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; + ohci0: usb@15800000 { + compatible = "generic-ohci"; + reg = <0 0x15800000 0 0x100>; + interrupts = <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@15800100 { + compatible = "generic-ehci"; + reg = <0 0x15800100 0 0x100>; + interrupts = <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@15800200 { + compatible = "renesas,usb2-phy-r9a09g056", "renesas,usb2-phy-r9a09g057"; + reg = <0 0x15800200 0 0x700>; + interrupts = <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, + <&cpg CPG_CORE R9A09G056_USB2_0_CLK_CORE0>; + clock-names = "fck", "usb_x1"; + resets = <&usb20phyrst>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@15820000 { + compatible = "renesas,usbhs-r9a09g056", + "renesas,rzg2l-usbhs"; + reg = <0 0x15820000 0 0x10000>; + interrupts = <GIC_SPI 751 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>; + resets = <&usb20phyrst>, + <&cpg 0xae>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb20phyrst: usb20phy-reset@15830000 { + compatible = "renesas,r9a09g056-usb2phy-reset", + "renesas,r9a09g057-usb2phy-reset"; + reg = <0 0x15830000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xb6>; + resets = <&cpg 0xaf>; + power-domains = <&cpg>; + #reset-cells = <0>; + status = "disabled"; + }; + sdhi0: mmc@15c00000 { compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057"; reg = <0x0 0x15c00000 0 0x10000>; @@ -268,6 +715,215 @@ status = "disabled"; }; }; + + eth0: ethernet@15c30000 { + compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c30000 0 0x10000>; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>, + <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>, + <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb0>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + eth1: ethernet@15c40000 { + compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c40000 0 0x10000>; + interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>, + <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>, + <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb1>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts index 24343fce7f53..03aeea781186 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts @@ -15,6 +15,15 @@ compatible = "renesas,rzv2n-evk", "renesas,r9a09g056n48", "renesas,r9a09g056"; aliases { + ethernet0 = ð0; + ethernet1 = ð1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; mmc1 = &sdhi1; serial0 = &scif; }; @@ -30,6 +39,24 @@ reg = <0x0 0x48000000 0x1 0xf8000000>; }; + reg_0p8v: regulator-0p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-0.8V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -48,13 +75,232 @@ gpios-states = <0>; states = <3300000 0>, <1800000 1>; }; + + /* 32.768kHz crystal */ + x6: x6-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &audio_extal_clk { clock-frequency = <22579200>; }; +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <®_0p8v>; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c7 { + pinctrl-0 = <&i2c7_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c8 { + pinctrl-0 = <&i2c8_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + clocks = <&x6>; + clock-names = "xin"; + }; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&mdio1 { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + +&ostm3 { + status = "okay"; +}; + +&ostm4 { + status = "okay"; +}; + +&ostm5 { + status = "okay"; +}; + +&ostm6 { + status = "okay"; +}; + +&ostm7 { + status = "okay"; +}; + &pinctrl { + eth0_pins: eth0 { + pins = "ET0_TXC_TXCLK"; + output-enable; + }; + + eth1_pins: eth1 { + pins = "ET1_TXC_TXCLK"; + output-enable; + }; + + i2c0_pins: i2c0 { + pinmux = <RZV2N_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */ + <RZV2N_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */ + }; + + i2c1_pins: i2c1 { + pinmux = <RZV2N_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */ + <RZV2N_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */ + }; + + i2c2_pins: i2c2 { + pinmux = <RZV2N_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */ + <RZV2N_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */ + }; + + i2c3_pins: i2c3 { + pinmux = <RZV2N_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */ + <RZV2N_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */ + }; + + i2c6_pins: i2c6 { + pinmux = <RZV2N_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */ + <RZV2N_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */ + /* There are no pull-up resistors on the EVK, so enable the internal pull-up */ + bias-pull-up; + }; + + i2c7_pins: i2c7 { + pinmux = <RZV2N_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */ + <RZV2N_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */ + /* There are no pull-up resistors on the EVK, so enable the internal pull-up */ + bias-pull-up; + }; + + i2c8_pins: i2c8 { + pinmux = <RZV2N_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */ + <RZV2N_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */ + }; + scif_pins: scif { pins = "SCIF_TXD", "SCIF_RXD"; renesas,output-impedance = <1>; @@ -85,6 +331,28 @@ slew-rate = <0>; }; }; + + usb20_pins: usb20 { + ovc { + pinmux = <RZV2N_PORT_PINMUX(9, 6, 14)>; /* OVC */ + }; + + vbus { + pinmux = <RZV2N_PORT_PINMUX(9, 5, 14)>; /* VBUS */ + }; + }; + + xspi_pins: xspi0 { + ctrl { + pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP"; + output-enable; + }; + + io { + pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3"; + renesas,output-impedance = <3>; + }; + }; }; &qextal_clk { @@ -112,3 +380,61 @@ sd-uhs-sdr104; status = "okay"; }; + +&usb20phyrst { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb20_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&wdt1 { + status = "okay"; +}; + +&xspi { + pinctrl-0 = <&xspi_pins>; + pinctrl-names = "default"; + /* + * MT25QU512ABB8E12 flash chip is capable of running at 166MHz + * clock frequency. Set the clock frequency to the maximum 133MHz + * supported by the RZ/V2N SoC. + */ + assigned-clocks = <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>; + assigned-clock-rates = <133333334>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_1p8v>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip"; + reg = <0x00060000 0x1fa0000>; + }; + + partition@2000000 { + label = "user"; + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi index 0f3501951409..044f2a22f161 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi @@ -280,6 +280,27 @@ resets = <&cpg 0x30>; }; + xspi: spi@11030000 { + compatible = "renesas,r9a09g057-xspi", "renesas,r9a09g047-xspi"; + reg = <0 0x11030000 0 0x10000>, + <0 0x20000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 0x9f>, + <&cpg CPG_MOD 0xa0>, + <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>, + <&cpg CPG_MOD 0xa1>; + clock-names = "ahb", "axi", "spi", "spix2"; + resets = <&cpg 0xa3>, <&cpg 0xa4>; + reset-names = "hresetn", "aresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@11400000 { compatible = "renesas,r9a09g057-dmac"; reg = <0 0x11400000 0 0x10000>; @@ -807,6 +828,119 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; + ohci0: usb@15800000 { + compatible = "generic-ohci"; + reg = <0 0x15800000 0 0x100>; + interrupts = <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@15810000 { + compatible = "generic-ohci"; + reg = <0 0x15810000 0 0x100>; + interrupts = <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>; + resets = <&usb21phyrst>, <&cpg 0xad>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@15800100 { + compatible = "generic-ehci"; + reg = <0 0x15800100 0 0x100>; + interrupts = <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@15810100 { + compatible = "generic-ehci"; + reg = <0 0x15810100 0 0x100>; + interrupts = <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>; + resets = <&usb21phyrst>, <&cpg 0xad>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@15800200 { + compatible = "renesas,usb2-phy-r9a09g057"; + reg = <0 0x15800200 0 0x700>; + interrupts = <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, + <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE0>; + clock-names = "fck", "usb_x1"; + resets = <&usb20phyrst>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@15810200 { + compatible = "renesas,usb2-phy-r9a09g057"; + reg = <0 0x15810200 0 0x700>; + interrupts = <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb4>, + <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE1>; + clock-names = "fck", "usb_x1"; + resets = <&usb21phyrst>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@15820000 { + compatible = "renesas,usbhs-r9a09g057", + "renesas,rzg2l-usbhs"; + reg = <0 0x15820000 0 0x10000>; + interrupts = <GIC_SPI 751 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>; + resets = <&usb20phyrst>, + <&cpg 0xae>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb20phyrst: usb20phy-reset@15830000 { + compatible = "renesas,r9a09g057-usb2phy-reset"; + reg = <0 0x15830000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xb6>; + resets = <&cpg 0xaf>; + power-domains = <&cpg>; + #reset-cells = <0>; + status = "disabled"; + }; + + usb21phyrst: usb21phy-reset@15840000 { + compatible = "renesas,r9a09g057-usb2phy-reset"; + reg = <0 0x15840000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xb7>; + resets = <&cpg 0xaf>; + power-domains = <&cpg>; + #reset-cells = <0>; + status = "disabled"; + }; + sdhi0: mmc@15c00000 { compatible = "renesas,sdhi-r9a09g057"; reg = <0x0 0x15c00000 0 0x10000>; @@ -866,6 +1000,215 @@ status = "disabled"; }; }; + + eth0: ethernet@15c30000 { + compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c30000 0 0x10000>; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>, + <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>, + <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb0>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + eth1: ethernet@15c40000 { + compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c40000 0 0x10000>; + interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>, + <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>, + <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb1>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts index 063eca0ba3e2..5c3f4e471e3d 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts @@ -16,6 +16,8 @@ compatible = "renesas,rzv2h-evk", "renesas,r9a09g057h44", "renesas,r9a09g057"; aliases { + ethernet0 = ð0; + ethernet1 = ð1; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -43,7 +45,7 @@ reg = <0x2 0x40000000 0x2 0x00000000>; }; - reg_0p8v: regulator0 { + reg_0p8v: regulator-0p8v { compatible = "regulator-fixed"; regulator-name = "fixed-0.8V"; @@ -53,7 +55,16 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -72,17 +83,54 @@ gpios-states = <0>; states = <3300000 0>, <1800000 1>; }; + + /* 32.768kHz crystal */ + x6: x6-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &audio_extal_clk { clock-frequency = <22579200>; }; +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + &gpu { status = "okay"; mali-supply = <®_0p8v>; }; +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -137,6 +185,61 @@ clock-frequency = <400000>; status = "okay"; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + clocks = <&x6>; + clock-names = "xin"; + }; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&mdio1 { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; }; &ostm0 { @@ -172,6 +275,16 @@ }; &pinctrl { + eth0_pins: eth0 { + pins = "ET0_TXC_TXCLK"; + output-enable; + }; + + eth1_pins: eth1 { + pins = "ET1_TXC_TXCLK"; + output-enable; + }; + i2c0_pins: i2c0 { pinmux = <RZV2H_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */ <RZV2H_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */ @@ -237,6 +350,38 @@ pinmux = <RZV2H_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */ }; }; + + usb20_pins: usb20 { + ovc { + pinmux = <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */ + }; + + vbus { + pinmux = <RZV2H_PORT_PINMUX(9, 5, 14)>; /* VBUS */ + }; + }; + + usb21_pins: usb21 { + ovc { + pinmux = <RZV2H_PORT_PINMUX(6, 7, 14)>; /* OVC */ + }; + + vbus { + pinmux = <RZV2H_PORT_PINMUX(6, 6, 14)>; /* VBUS */ + }; + }; + + xspi_pins: xspi0 { + ctrl { + pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP"; + output-enable; + }; + + io { + pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3"; + renesas,output-impedance = <3>; + }; + }; }; &qextal_clk { @@ -266,6 +411,71 @@ status = "okay"; }; +&usb20phyrst { + status = "okay"; +}; + +&usb21phyrst { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb20_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb21_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &wdt1 { status = "okay"; }; + +&xspi { + pinctrl-0 = <&xspi_pins>; + pinctrl-names = "default"; + /* + * MT25QU512ABB8E12 flash chip is capable of running at 166MHz + * clock frequency. Set the clock frequency to the maximum 133MHz + * supported by the RZ/V2H SoC. + */ + assigned-clocks = <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>; + assigned-clock-rates = <133333334>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_1p8v>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip"; + reg = <0x00060000 0x1fa0000>; + }; + + partition@2000000 { + label = "user"; + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi index afdc1940e24a..58561da3007a 100644 --- a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi +++ b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi @@ -23,6 +23,9 @@ * SW_GPIO9_CAN1_STB: * 0 - Connect to GPIO9 PMOD (default) * 1 - Connect to CAN1 transceiver STB pin + * + * GPIO keys are enabled by default. Use PMOD_GPIO macros to disable them + * if needed. */ / { @@ -35,6 +38,7 @@ }; aliases { + i2c0 = &i2c0; serial3 = &scif0; mmc1 = &sdhi1; }; @@ -52,12 +56,45 @@ max-bitrate = <8000000>; status = "disabled"; }; + + keys: keys { + compatible = "gpio-keys"; + + key-1 { + interrupts-extended = <&pinctrl KEY_1_GPIO IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_1>; + label = "USER_SW1"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + interrupts-extended = <&pinctrl KEY_2_GPIO IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_2>; + label = "USER_SW2"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + interrupts-extended = <&pinctrl KEY_3_GPIO IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_3>; + label = "USER_SW3"; + wakeup-source; + debounce-interval = <20>; + }; + }; }; &canfd { status = "okay"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; +}; + &scif0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi index ecea29a76b14..7faa44510d98 100644 --- a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi @@ -26,6 +26,8 @@ compatible = "renesas,rzg3e-smarcm", "renesas,r9a09g047e57", "renesas,r9a09g047"; aliases { + ethernet0 = ð0; + ethernet1 = ð1; i2c2 = &i2c2; mmc0 = &sdhi0; mmc2 = &sdhi2; @@ -77,6 +79,24 @@ clock-frequency = <48000000>; }; +ð0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +ð1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &gpu { status = "okay"; mali-supply = <®_vdd0p8v_others>; @@ -102,7 +122,98 @@ }; }; +&mdio0 { + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupts-extended = <&icu 3 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-psec = <1400>; + txc-skew-psec = <1400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&mdio1 { + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupts-extended = <&icu 16 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-psec = <1400>; + txc-skew-psec = <1400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + &pinctrl { + eth0_pins: eth0 { + clk { + pinmux = <RZG3E_PORT_PINMUX(B, 1, 1)>; /* TXC */ + output-enable; + }; + + ctrl { + pinmux = <RZG3E_PORT_PINMUX(A, 1, 1)>, /* MDC */ + <RZG3E_PORT_PINMUX(A, 0, 1)>, /* MDIO */ + <RZG3E_PORT_PINMUX(C, 2, 15)>, /* PHY_INTR (IRQ2) */ + <RZG3E_PORT_PINMUX(C, 1, 1)>, /* RXD3 */ + <RZG3E_PORT_PINMUX(C, 0, 1)>, /* RXD2 */ + <RZG3E_PORT_PINMUX(B, 7, 1)>, /* RXD1 */ + <RZG3E_PORT_PINMUX(B, 6, 1)>, /* RXD0 */ + <RZG3E_PORT_PINMUX(B, 0, 1)>, /* RXC */ + <RZG3E_PORT_PINMUX(A, 2, 1)>, /* RX_CTL */ + <RZG3E_PORT_PINMUX(B, 5, 1)>, /* TXD3 */ + <RZG3E_PORT_PINMUX(B, 4, 1)>, /* TXD2 */ + <RZG3E_PORT_PINMUX(B, 3, 1)>, /* TXD1 */ + <RZG3E_PORT_PINMUX(B, 2, 1)>, /* TXD0 */ + <RZG3E_PORT_PINMUX(A, 3, 1)>; /* TX_CTL */ + }; + }; + + eth1_pins: eth1 { + clk { + pinmux = <RZG3E_PORT_PINMUX(E, 1, 1)>; /* TXC */ + output-enable; + }; + + ctrl { + + pinmux = <RZG3E_PORT_PINMUX(D, 1, 1)>, /* MDC */ + <RZG3E_PORT_PINMUX(D, 0, 1)>, /* MDIO */ + <RZG3E_PORT_PINMUX(F, 2, 15)>, /* PHY_INTR (IRQ15) */ + <RZG3E_PORT_PINMUX(F, 1, 1)>, /* RXD3 */ + <RZG3E_PORT_PINMUX(F, 0, 1)>, /* RXD2 */ + <RZG3E_PORT_PINMUX(E, 7, 1)>, /* RXD1 */ + <RZG3E_PORT_PINMUX(E, 6, 1)>, /* RXD0 */ + <RZG3E_PORT_PINMUX(E, 0, 1)>, /* RXC */ + <RZG3E_PORT_PINMUX(D, 2, 1)>, /* RX_CTL */ + <RZG3E_PORT_PINMUX(E, 5, 1)>, /* TXD3 */ + <RZG3E_PORT_PINMUX(E, 4, 1)>, /* TXD2 */ + <RZG3E_PORT_PINMUX(E, 3, 1)>, /* TXD1 */ + <RZG3E_PORT_PINMUX(E, 2, 1)>, /* TXD0 */ + <RZG3E_PORT_PINMUX(D, 3, 1)>; /* TX_CTL */ + }; + }; + i2c2_pins: i2c { pinmux = <RZG3E_PORT_PINMUX(3, 4, 1)>, /* SCL2 */ <RZG3E_PORT_PINMUX(3, 5, 1)>; /* SDA2 */ @@ -182,6 +293,15 @@ pinmux = <RZG3E_PORT_PINMUX(K, 2, 1)>; /* SD2PWEN */ }; }; + + xspi_pins: xspi0 { + pinmux = <RZG3E_PORT_PINMUX(M, 0, 0)>, /* XSPI0_IO0 */ + <RZG3E_PORT_PINMUX(M, 1, 0)>, /* XSPI0_IO1 */ + <RZG3E_PORT_PINMUX(M, 2, 0)>, /* XSPI0_IO2 */ + <RZG3E_PORT_PINMUX(M, 3, 0)>, /* XSPI0_IO3 */ + <RZG3E_PORT_PINMUX(L, 0, 0)>, /* XSPI0_CKP */ + <RZG3E_PORT_PINMUX(L, 1, 0)>; /* XSPI0_CS0 */ + }; }; &qextal_clk { @@ -245,3 +365,40 @@ &wdt1 { status = "okay"; }; + +&xspi { + pinctrl-0 = <&xspi_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_1p8v>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip"; + reg = <0x00060000 0x007a0000>; + }; + + partition@800000 { + label = "user"; + reg = <0x800000 0x800000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso new file mode 100644 index 000000000000..eda2b31f6d79 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Shared DT overlay for the eMMC Sub Board (RTK0EF0186B02000BJ), which + * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs. + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&{/} { + aliases { + mmc0 = "/soc/mmc@15c00000"; + }; +}; + +&pinctrl { + sdhi0_emmc_pins: emmc-pins { + sd0-clk { + pins = "SD0CLK"; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + + sd0-dat-cmd { + pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0DAT4", + "SD0DAT5", "SD0DAT6", "SD0DAT7", "SD0CMD"; + input-enable; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso new file mode 100644 index 000000000000..0af1e0a6c7f4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Shared DT overlay for the microSD Sub Board (RTK0EF0186B01000BJ), which + * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs. + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&{/} { + aliases { + mmc0 = "/soc/mmc@15c00000"; + }; + + vqmmc_sdhi0: regulator-vqmmc-sdhi0 { + compatible = "regulator-gpio"; + regulator-name = "SDHI0 VqmmC"; + gpios = <&pinctrl RZG2L_GPIO(10, 0) GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios-states = <0>; + states = <3300000 0>, <1800000 1>; + }; +}; + +&pinctrl { + sdhi0-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(10, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd0_pwr_en"; + }; + + sdhi0_pins: sd0 { + sd0-cd { + pinmux = <RZG2L_PORT_PINMUX(10, 5, 15)>; /* SD0_CD */ + }; + + sd0-clk { + pins = "SD0CLK"; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + + sd0-dat-cmd { + pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD"; + input-enable; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vqmmc_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 68971c870d17..bbb3583372d0 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -592,6 +592,7 @@ }; &i2c_dvfs { + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -625,6 +626,7 @@ compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index fcab957b54f7..8a30908992ab 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -244,6 +244,7 @@ }; &i2c_dvfs { + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -277,6 +278,7 @@ compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 4bf84622db47..099520962ffb 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-s0.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-sakurapi-rk3308b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb @@ -84,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb @@ -143,7 +145,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb @@ -160,6 +165,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-ethernet-switch.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-mnt-reform2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb @@ -174,6 +180,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5t.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb @@ -188,6 +195,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5c.dtb @@ -220,11 +228,23 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \ rk3399-puma-haikou-video-demo.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb +rk3399-rockpro64-screen-dtbs := rk3399-rockpro64.dtb \ + rk3399-rockpro64-screen.dtbo + +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2-screen.dtb +rk3399-rockpro64-v2-screen-dtbs := rk3399-rockpro64-v2.dtb \ + rk3399-rockpro64-screen.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \ rk3568-wolfvision-pf5-display-vz.dtbo \ rk3568-wolfvision-pf5-io-expander.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtb +rk3576-armsom-sige5-v1.2-wifibt-dtbs := rk3576-armsom-sige5.dtb \ + rk3576-armsom-sige5-v1.2-wifibt.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtb rk3588-edgeble-neu6a-wifi-dtbs := rk3588-edgeble-neu6a-io.dtb \ rk3588-edgeble-neu6a-wifi.dtbo @@ -233,6 +253,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-wifi.dtb rk3588-edgeble-neu6b-wifi-dtbs := rk3588-edgeble-neu6b-io.dtb \ rk3588-edgeble-neu6a-wifi.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-ethernet-switch.dtb +rk3588-jaguar-ethernet-switch-dtbs := rk3588-jaguar.dtb \ + rk3588-jaguar-ethernet-switch.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtb rk3588-jaguar-pre-ict-tester-dtbs := rk3588-jaguar.dtb \ rk3588-jaguar-pre-ict-tester.dtbo diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts index 1d26164be7b8..a31c61c8f148 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts @@ -12,6 +12,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts index 82c6acdb4fae..a3c6edfdb37c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts @@ -12,6 +12,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts index 94449132df38..9b5eff392dfa 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts @@ -12,6 +12,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts index d7b639e7ccab..36b7cae49e31 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts @@ -16,6 +16,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index d93aaac7a42f..85d1642eb9be 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -124,6 +124,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { @@ -483,8 +485,7 @@ ports { port@0 { - mipi_in_ucam: endpoint@0 { - reg = <0>; + mipi_in_ucam: endpoint { data-lanes = <1 2>; remote-endpoint = <&ucam_out>; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts index b71929bcb33e..932721ffd470 100644 --- a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts +++ b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts @@ -12,6 +12,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts index a9bd5936c701..70adf091371c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts +++ b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts @@ -12,6 +12,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi index 3f9a133d7373..b4bd4e34747c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi @@ -444,8 +444,7 @@ ports { port@0 { - mipi_in_ucam: endpoint@0 { - reg = <0>; + mipi_in_ucam: endpoint { data-lanes = <1 2>; remote-endpoint = <&ucam_out>; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso index 7d9ea5aa5984..ea5ce919984f 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso @@ -94,6 +94,15 @@ }; }; +&cif_clkout_m0 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none_12ma>; +}; + +&csi_dphy { + status = "okay"; +}; + &display_subsystem { status = "okay"; }; @@ -135,6 +144,12 @@ /* OV5675, GT911, DW9714 are limited to 400KHz */ clock-frequency = <400000>; + focus: focus@c { + compatible = "dongwoon,dw9714"; + reg = <0xc>; + vcc-supply = <&cam_afvdd_2v8>; + }; + touchscreen@14 { compatible = "goodix,gt911"; reg = <0x14>; @@ -157,6 +172,44 @@ pinctrl-names = "default"; reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; }; + + camera@36 { + compatible = "ovti,ov5675"; + reg = <0x36>; + clocks = <&cru SCLK_CIF_OUT>; + assigned-clocks = <&cru SCLK_CIF_OUT>; + /* Only parent to get exactly 19.2MHz */ + assigned-clock-parents = <&cru USB480M>; + assigned-clock-rates = <19200000>; + avdd-supply = <&cam_avdd_2v8>; + dvdd-supply = <&cam_dvdd_1v2>; + dovdd-supply = <&cam_dovdd_1v8>; + lens-focus = <&focus>; + orientation = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + reset-gpios = <&pca9670 6 GPIO_ACTIVE_LOW>; + rotation = <180>; + + port { + cam_out: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + remote-endpoint = <&mipi_in_cam>; + }; + }; + }; +}; + +&isp { + status = "okay"; +}; + +&isp_in { + mipi_in_cam: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&cam_out>; + }; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index feabdadfa440..46f64cd33b9b 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -351,8 +351,6 @@ pmugrf: syscon@ff010000 { compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff010000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; pmu_io_domains: io-domains { compatible = "rockchip,px30-pmu-io-voltage-domain"; @@ -453,8 +451,6 @@ grf: syscon@ff140000 { compatible = "rockchip,px30-grf", "syscon", "simple-mfd"; reg = <0x0 0xff140000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; io_domains: io-domains { compatible = "rockchip,px30-io-voltage-domain"; @@ -1137,8 +1133,6 @@ resets = <&cru SRST_MIPIDSI_HOST_P>; reset-names = "apb"; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; ports { @@ -1269,10 +1263,8 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + isp_in: port@0 { reg = <0>; - #address-cells = <1>; - #size-cells = <0>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts new file mode 100644 index 000000000000..f9f633aebb64 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <akash@openedev.com> + * Copyright (c) 2019 Jagan Teki <jagan@openedev.com> + * Copyright (C) 2024 TheSnowfield <thesnowfield@sakurapi.org> + * Copyright (C) 2025 Hsun Lai <i@chainsx.cn> + */ + +/dts-v1/; +#include "rk3308.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Sakura Pi RK3308B"; + compatible = "sakurapi,rk3308-sakurapi-rk3308b", "rockchip,rk3308"; + + aliases { + mmc0 = &emmc; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_core: regulator-vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: regulator-vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_ddr: regulator-vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_io: regulator-vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_phy: regulator-vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_otg: regulator-vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake: wifi-host-wake { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&pwm3 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + no-mmc; + no-sd; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + card-detect-delay = <800>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&cru SCLK_RTC32K>; + clock-names = "lpo"; + pinctrl-names = "default"; + pinctrl-0 = <&host_wake_bt &bt_wake_host &bt_reg_on>; + device-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + }; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci{ + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi index 150fadcb0b3c..54395a40b087 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi @@ -118,6 +118,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts index 10e6ab724ac4..4d306085646c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts @@ -322,6 +322,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; internal_display: panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi index 446a1a6c12e7..bf4554eff47d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi @@ -220,6 +220,8 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 7d992c3c01ce..6438c969f9d7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -731,11 +731,7 @@ status = "disabled"; vop_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vop_out_hdmi: endpoint@0 { - reg = <0>; + vop_out_hdmi: endpoint { remote-endpoint = <&hdmi_in_vop>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi index 9d5f5b083e3c..4dcceb9136b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi @@ -2071,8 +2071,6 @@ resets = <&cru SRST_P_MIPI_DSI0>; reset-names = "apb"; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; ports { @@ -2112,8 +2110,6 @@ resets = <&cru SRST_P_MIPI_DSI1>; reset-names = "apb"; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; #phy-cells = <0>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index a9ea4b0daa04..9d07353df52c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -250,18 +250,11 @@ */ assigned-clocks = <&cru PCLK_EDP>; assigned-clock-rates = <24000000>; +}; - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; +&edp_out { + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 5e068377a0a2..6aaaf0f7f73f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -627,8 +627,10 @@ camera: &i2c7 { }; &mipi_dsi { - status = "okay"; clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; ports { mipi_out: port@1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index 81c4fcb30f39..352c8efb37e0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -211,7 +211,6 @@ vdd_cpu_b: syr827@40 { compatible = "silergy,syr827"; reg = <0x40>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; @@ -229,7 +228,6 @@ vdd_gpu: syr828@41 { compatible = "silergy,syr828"; reg = <0x41>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 5473070823cb..5a8551d9ffe4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -404,18 +404,11 @@ pinctrl-names = "default"; pinctrl-0 = <&edp_hpd>; status = "okay"; +}; - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; +&edp_out { + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index 04ba4c4565d0..585ef0fd88ef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -104,6 +104,16 @@ regulator-boot-on; }; + avdd2v8_dvp: regulator-avdd2v8-dvp { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -136,6 +146,16 @@ vin-supply = <&vcc3v3_sys>; }; + vcc1v2_dvp: regulator-vcc1v2-dvp { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcca1v8_s3>; + }; + wifi_pwrseq: sdio-wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk818 1>; @@ -312,6 +332,8 @@ vcca1v8_codec: LDO_REG3 { regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -420,6 +442,67 @@ }; }; +&i2c1 { + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <24000000>; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer &cif_clkouta>; + status = "okay"; + + wcam: camera@1a { + compatible = "sony,imx258"; + reg = <0x1a>; + clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK0, derived from CIF_CLKO */ + lens-focus = <&wcam_lens>; + orientation = <1>; /* V4L2_CAMERA_ORIENTATION_BACK */ + pinctrl-names = "default"; + pinctrl-0 = <&camera_rst_l>; + reset-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + rotation = <270>; + /* Note: both cameras also depend on vcca1v8_codec to power the I2C bus. */ + vif-supply = <&vcc1v8_dvp>; + vana-supply = <&avdd2v8_dvp>; + vdig-supply = <&vcc1v2_dvp>; /* DVDD_DVP is the same as VCC1V2_DVP */ + + port { + wcam_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <636000000>; + remote-endpoint = <&mipi_in_wcam>; + }; + }; + }; + + wcam_lens: camera-lens@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + /* Same I2c bus as both cameras, depends on vcca1v8_codec for power. */ + vcc-supply = <&vcc1v8_dvp>; + }; + + ucam: camera@36 { + compatible = "ovti,ov8858"; + reg = <0x36>; + clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK1, derived from CIF_CLK0 */ + clock-names = "xvclk"; + dovdd-supply = <&vcc1v8_dvp>; + orientation = <0>; /* V4L2_CAMERA_ORIENTATION_FRONT */ + pinctrl-names = "default"; + pinctrl-0 = <&camera2_rst_l &dvp_pdn0_h>; + powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + rotation = <90>; + + port { + ucam_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_in_ucam>; + }; + }; + }; +}; + &i2c3 { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; @@ -462,30 +545,61 @@ status = "okay"; }; -&mipi_dsi { +&isp0 { status = "okay"; - clock-master; ports { - mipi_out: port@1 { - #address-cells = <0>; - #size-cells = <0>; - reg = <1>; + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&ucam_out>; + }; + }; + }; +}; + +&isp0_mmu { + status = "okay"; +}; + +&isp1 { + status = "okay"; - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; + ports { + port@0 { + mipi_in_wcam: endpoint@0 { + reg = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&wcam_out>; }; }; }; +}; + +&mipi_dphy_rx0 { + status = "okay"; +}; + +&isp1_mmu { + status = "okay"; +}; + +&mipi_dsi { + clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; panel@0 { - compatible = "hannstar,hsd060bhw4"; + compatible = "hannstar,hsd060bhw4", "himax,hx8394"; reg = <0>; backlight = <&backlight>; - reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; - vcc-supply = <&vcc2v8_lcd>; iovcc-supply = <&vcc1v8_lcd>; pinctrl-names = "default"; + pinctrl-0 = <&lcd1_rst_pin>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; port { mipi_in_panel: endpoint { @@ -495,6 +609,16 @@ }; }; +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&mipi_dsi1 { + status = "okay"; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -507,6 +631,24 @@ }; }; + lcd { + lcd1_rst_pin: lcd1-rst-pin { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cameras { + camera_rst_l: camera-rst-l { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + camera2_rst_l: camera2-rst-l { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + dvp_pdn0_h: dvp-pdn0-h { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { red_led_pin: red-led-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso index 0377ec860d35..d28880b8dd44 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso @@ -124,12 +124,6 @@ }; }; -&mipi_out { - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; -}; - &mipi_dsi { #address-cells = <1>; #size-cells = <0>; @@ -151,6 +145,12 @@ }; }; +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + &pinctrl { pca9670 { pca9670_resetn: pca9670-resetn { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 15da5c80d25d..962b8b231c96 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -421,7 +421,6 @@ compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel1_gpio>; vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; regulator-name = "vdd_cpu_b"; @@ -440,7 +439,6 @@ compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel2_gpio>; vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; regulator-name = "vdd_gpu"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso new file mode 100644 index 000000000000..dabe535f2111 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2025 Peter Robinson <pbrobinson@gmail.com> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> + +&{/} { + avdd: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <11000000>; + regulator-max-microvolt = <11000000>; + vin-supply = <&vcc3v3_s0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + pwms = <&pwm0 0 1000000 0>; + status = "okay"; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + touch: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + +&mipi_dsi { + clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mipi_panel: panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <&avdd>; + backlight = <&backlight>; + dvdd-supply = <&vcc3v3_s0>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&pwm0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index a7e4adf87e7a..8b72ae6449c9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -20,15 +20,6 @@ stdout-path = "serial2:1500000n8"; }; - /* enable for panel backlight support */ - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <5>; - pwms = <&pwm0 0 1000000 0>; - status = "disabled"; - }; - clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -116,14 +107,6 @@ }; }; - avdd: regulator-avdd { - compatible = "regulator-fixed"; - regulator-name = "avdd"; - regulator-min-microvolt = <11000000>; - regulator-max-microvolt = <11000000>; - vin-supply = <&vcc3v3_s0>; - }; - vcc12v_dcin: regulator-vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -590,19 +573,6 @@ vbus-supply = <&vcc5v0_typec>; status = "okay"; }; - - /* enable for pine64 touch screen support */ - touch: touchscreen@5d { - compatible = "goodix,gt911"; - reg = <0x5d>; - interrupt-parent = <&gpio4>; - interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>; - AVDD28-supply = <&vcc3v0_touch>; - VDDIO-supply = <&vcc3v0_touch>; - irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; }; &i2s0 { @@ -638,36 +608,6 @@ gpio1830-supply = <&vcc_3v0>; }; -/* enable for pine64 panel display support */ -&mipi_dsi { - clock-master; - status = "disabled"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - mipi_panel: panel@0 { - compatible = "feiyang,fy07024di26a30d"; - reg = <0>; - avdd-supply = <&avdd>; - backlight = <&backlight>; - dvdd-supply = <&vcc3v3_s0>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - &pcie0 { ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; @@ -782,10 +722,6 @@ }; }; -&pwm0 { - status = "okay"; -}; - &pwm1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index fdaa8472b7a7..a4ceafe6dd7a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -142,21 +142,13 @@ &edp { status = "okay"; +}; - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; +&edp_out { + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; }; }; - &i2c1 { i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi index ea051362fb26..59b75c91bbb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi @@ -98,42 +98,42 @@ fephy { /omit-if-no-ref/ - fephym0_led_dpx: fephym0-led_dpx { + fephym0_led_dpx: fephym0-led-dpx { rockchip,pins = /* fephy_led_dpx_m0 */ <4 RK_PB5 2 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym0_led_link: fephym0-led_link { + fephym0_led_link: fephym0-led-link { rockchip,pins = /* fephy_led_link_m0 */ <4 RK_PC0 2 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym0_led_spd: fephym0-led_spd { + fephym0_led_spd: fephym0-led-spd { rockchip,pins = /* fephy_led_spd_m0 */ <4 RK_PB7 2 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym1_led_dpx: fephym1-led_dpx { + fephym1_led_dpx: fephym1-led-dpx { rockchip,pins = /* fephy_led_dpx_m1 */ <2 RK_PA4 5 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym1_led_link: fephym1-led_link { + fephym1_led_link: fephym1-led-link { rockchip,pins = /* fephy_led_link_m1 */ <2 RK_PA6 5 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym1_led_spd: fephym1-led_spd { + fephym1_led_spd: fephym1-led-spd { rockchip,pins = /* fephy_led_spd_m1 */ <2 RK_PA5 5 &pcfg_pull_none>; @@ -779,7 +779,7 @@ }; /omit-if-no-ref/ - rgmii_rx_bus2: rgmii-rx_bus2 { + rgmii_rx_bus2: rgmii-rx-bus2 { rockchip,pins = /* rgmii_rxd0 */ <3 RK_PA3 2 &pcfg_pull_none>, @@ -790,7 +790,7 @@ }; /omit-if-no-ref/ - rgmii_tx_bus2: rgmii-tx_bus2 { + rgmii_tx_bus2: rgmii-tx-bus2 { rockchip,pins = /* rgmii_txd0 */ <3 RK_PA1 2 &pcfg_pull_none_drv_level_2>, @@ -801,7 +801,7 @@ }; /omit-if-no-ref/ - rgmii_rgmii_clk: rgmii-rgmii_clk { + rgmii_rgmii_clk: rgmii-rgmii-clk { rockchip,pins = /* rgmii_rxclk */ <3 RK_PA5 2 &pcfg_pull_none>, @@ -810,7 +810,7 @@ }; /omit-if-no-ref/ - rgmii_rgmii_bus: rgmii-rgmii_bus { + rgmii_rgmii_bus: rgmii-rgmii-bus { rockchip,pins = /* rgmii_rxd2 */ <3 RK_PA7 2 &pcfg_pull_none>, diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index 9f6ccd9dd1f7..12eec2c1db22 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -198,6 +198,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1m0_xfer>; @@ -278,6 +283,7 @@ &sdhci { bus-width = <8>; cap-mmc-highspeed; + mmc-hs200-1_8v; no-sd; no-sdio; non-removable; diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index d1c72b52aa4e..001a555c83b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -95,6 +95,36 @@ }; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <875000 875000 1000000>; + opp-suspend; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <875000 875000 1000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <875000 875000 1000000>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <900000 900000 1000000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <950000 950000 1000000>; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3528-pinctrl"; rockchip,grf = <&ioc_grf>; @@ -439,13 +469,133 @@ reg = <0x0 0xff540000 0x0 0x40000>; }; + pmu: power-management@ff600000 { + compatible = "rockchip,rk3528-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff600000 0x0 0x2000>; + + power: power-controller { + compatible = "rockchip,rk3528-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_GPU */ + power-domain@4 { + reg = <4>; + clocks = <&cru ACLK_GPU_MALI>, + <&cru PCLK_GPU_ROOT>; + pm_qos = <&qos_gpu_m0>, + <&qos_gpu_m1>; + #power-domain-cells = <0>; + }; + + /* These power domains are grouped by VD_LOGIC */ + power-domain@5 { + reg = <5>; + pm_qos = <&qos_rkvdec>; + #power-domain-cells = <0>; + status = "disabled"; + }; + power-domain@6 { + reg = <6>; + pm_qos = <&qos_rkvenc>; + #power-domain-cells = <0>; + status = "disabled"; + }; + power-domain@7 { + reg = <7>; + pm_qos = <&qos_gmac0>, + <&qos_hdcp>, + <&qos_jpegdec>, + <&qos_rga2_m0ro>, + <&qos_rga2_m0wo>, + <&qos_sdmmc0>, + <&qos_usb2host>, + <&qos_vdpp>, + <&qos_vop>; + #power-domain-cells = <0>; + status = "disabled"; + }; + power-domain@8 { + reg = <8>; + pm_qos = <&qos_emmc>, + <&qos_fspi>, + <&qos_gmac1>, + <&qos_pcie>, + <&qos_sdio0>, + <&qos_sdio1>, + <&qos_tsp>, + <&qos_usb3otg>, + <&qos_vpu>; + #power-domain-cells = <0>; + status = "disabled"; + }; + }; + }; + + gpu: gpu@ff700000 { + compatible = "rockchip,rk3528-mali", "arm,mali-450"; + reg = <0x0 0xff700000 0x0 0x40000>; + assigned-clocks = <&cru ACLK_GPU_MALI>, + <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <297000000>, <300000000>; + clocks = <&cru ACLK_GPU_MALI>, <&scmi_clk SCMI_CLK_GPU>; + clock-names = "bus", "core"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power 4>; + resets = <&cru SRST_A_GPU>; + status = "disabled"; + }; + + spi0: spi@ff9c0000 { + compatible = "rockchip,rk3528-spi", + "rockchip,rk3066-spi"; + reg = <0x0 0xff9c0000 0x0 0x1000>; + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac 25>, <&dmac 24>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff9d0000 { + compatible = "rockchip,rk3528-spi", + "rockchip,rk3066-spi"; + reg = <0x0 0xff9d0000 0x0 0x1000>; + clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac 31>, <&dmac 30>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart0: serial@ff9f0000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xff9f0000 0x0 0x100>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 8>, <&dmac 9>; + dmas = <&dmac 9>, <&dmac 8>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -457,7 +607,7 @@ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 10>, <&dmac 11>; + dmas = <&dmac 11>, <&dmac 10>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -469,7 +619,7 @@ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 12>, <&dmac 13>; + dmas = <&dmac 13>, <&dmac 12>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -481,7 +631,7 @@ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 14>, <&dmac 15>; + dmas = <&dmac 15>, <&dmac 14>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -493,7 +643,7 @@ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 16>, <&dmac 17>; + dmas = <&dmac 17>, <&dmac 16>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -505,7 +655,7 @@ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 18>, <&dmac 19>; + dmas = <&dmac 19>, <&dmac 18>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -517,7 +667,7 @@ clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 20>, <&dmac 21>; + dmas = <&dmac 21>, <&dmac 20>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -529,7 +679,7 @@ clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac 22>, <&dmac 23>; + dmas = <&dmac 23>, <&dmac 22>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3562.dtsi b/arch/arm64/boot/dts/rockchip/rk3562.dtsi index def504ffa326..f84676b47b27 100644 --- a/arch/arm64/boot/dts/rockchip/rk3562.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3562.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/power/rockchip,rk3562-power.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/reset/rockchip,rk3562-cru.h> #include <dt-bindings/soc/rockchip,boot-mode.h> @@ -351,7 +352,7 @@ num-lanes = <1>; phys = <&combphy PHY_TYPE_PCIE>; phy-names = "pcie-phy"; - power-domains = <&power 15>; + power-domains = <&power RK3562_PD_PHP>; ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x100000 0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x1e00000 0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>; @@ -667,48 +668,48 @@ #address-cells = <1>; #size-cells = <0>; - power-domain@8 { - reg = <8>; + power-domain@RK3562_PD_GPU { + reg = <RK3562_PD_GPU>; pm_qos = <&qos_gpu>; #power-domain-cells = <0>; }; - power-domain@7 { - reg = <7>; + power-domain@RK3562_PD_NPU { + reg = <RK3562_PD_NPU>; pm_qos = <&qos_npu>; #power-domain-cells = <0>; }; - power-domain@11 { - reg = <11>; + power-domain@RK3562_PD_VDPU { + reg = <RK3562_PD_VDPU>; pm_qos = <&qos_rkvdec>; #power-domain-cells = <0>; }; - power-domain@12 { - reg = <12>; + power-domain@RK3562_PD_VI { + reg = <RK3562_PD_VI>; pm_qos = <&qos_isp>, <&qos_vicap>; #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - power-domain@10 { - reg = <10>; + power-domain@RK3562_PD_VEPU { + reg = <RK3562_PD_VEPU>; pm_qos = <&qos_vepu>; #power-domain-cells = <0>; }; }; - power-domain@13 { - reg = <13>; + power-domain@RK3562_PD_VO { + reg = <RK3562_PD_VO>; pm_qos = <&qos_vop>; #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - power-domain@14 { - reg = <14>; + power-domain@RK3562_PD_RGA { + reg = <RK3562_PD_RGA>; pm_qos = <&qos_rga_rd>, <&qos_rga_wr>, <&qos_jpeg>; @@ -716,8 +717,8 @@ }; }; - power-domain@15 { - reg = <15>; + power-domain@RK3562_PD_PHP { + reg = <RK3562_PD_PHP>; pm_qos = <&qos_pcie>, <&qos_usb3>; #power-domain-cells = <0>; @@ -737,7 +738,7 @@ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "job", "mmu", "gpu"; operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power 8>; + power-domains = <&power RK3562_PD_GPU>; #cooling-cells = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi index 233eade30f21..645db9d3d297 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -469,7 +469,7 @@ }; &i2c1 { - /* Unknown/unused device at 0x3c */ + /* Unused iSmartWare SW2001 encryption device at 0x3c */ status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index 3613661417b2..5c6f8cc401c9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -55,7 +55,7 @@ label = "cover"; gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; - linux,code = <SW_MACHINE_COVER>; + linux,code = <SW_LID>; linux,can-disable; wakeup-event-action = <EV_ACT_DEASSERTED>; wakeup-source; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi index 3473b1eef5cd..d0e38412d56a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi @@ -282,11 +282,11 @@ reg = <0>; backlight = <&backlight>; enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; - rotation = <90>; power-supply = <&vcc_3v3>; + rotation = <90>; - port@0 { - panel_in_dsi: endpoint@0 { + port { + panel_in_dsi: endpoint { remote-endpoint = <&dsi0_out_con>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index b073a4d03e4f..b01f952b640e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -22,6 +22,15 @@ mmc1 = &sdhci; }; + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <20 220>; + default-brightness-level = <100>; + num-interpolated-steps = <200>; + power-supply = <&vcc3v3_sys>; + pwms = <&pwm4 0 25000 0>; + }; + chosen: chosen { stdout-path = "serial2:1500000n8"; }; @@ -184,6 +193,47 @@ cpu-supply = <&vdd_cpu>; }; +&dsi0 { + clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "wanchanglong,w552793baa", "raydium,rm67200"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc3v3_lcd0_n>; + reset-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd0_n>; + vsn-supply = <&vcc5v0_sys>; + vsp-supply = <&vcc5v0_sys>; + + port { + panel_in_dsi: endpoint { + remote-endpoint = <&dsi0_out_panel>; + }; + }; + }; + +}; + +&dsi0_in { + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; +}; + +&dsi0_out { + dsi0_out_panel: endpoint { + remote-endpoint = <&panel_in_dsi>; + }; +}; + +&dsi_dphy0 { + status = "okay"; +}; + &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; @@ -581,6 +631,10 @@ status = "okay"; }; +&pwm4 { + status = "okay"; +}; + &saradc { vref-supply = <&vcca_1v8>; status = "okay"; @@ -672,8 +726,9 @@ }; &vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + assigned-clocks = <&cru DCLK_VOP0>, <&cru PLL_VPLL>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&xin24m>, <&cru PLL_VPLL>; + assigned-clock-rates = <0>, <132000000>, <132000000>; status = "okay"; }; @@ -687,3 +742,10 @@ remote-endpoint = <&hdmi_in_vp0>; }; }; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts index 3b31f0dd8f3b..718d1a2da8e5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts @@ -17,6 +17,19 @@ ethernet0 = &gmac0; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio4_a0_k1_pin>; + pinctrl-names = "default"; + + button-reset { + debounce-interval = <50>; + gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + label = "RESET"; + linux,code = <KEY_RESTART>; + }; + }; + gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -29,7 +42,6 @@ function-enumerator = <1>; gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; label = "LAN-1"; - linux,default-trigger = "netdev"; }; led-lan2 { @@ -39,7 +51,6 @@ function-enumerator = <2>; gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; label = "LAN-2"; - linux,default-trigger = "netdev"; }; power_led: led-sys { @@ -56,7 +67,6 @@ function = LED_FUNCTION_WAN; gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; label = "WAN"; - linux,default-trigger = "netdev"; }; }; }; @@ -127,6 +137,12 @@ }; }; + gpio-keys { + gpio4_a0_k1_pin: gpio4-a0-k1-pin { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gpio-leds { lan1_led_pin: lan1-led-pin { rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi index a28b4af10d13..e3f44ea4eabe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi @@ -18,12 +18,27 @@ aliases { mmc0 = &sdmmc0; mmc1 = &sdhci; + rtc0 = &hym8563; }; chosen: chosen { stdout-path = "serial2:1500000n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "MASKROM"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <0>; + }; + }; + hdmi-con { compatible = "hdmi-connector"; type = "a"; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso new file mode 100644 index 000000000000..242ccfaf711b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * DT-overlay to enable the onboard WiFi and Bluetooth module present in v1.2 + * boards. Note that v1.1 boards use a different module, so this probably won't + * work there. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + clock-names = "lpo"; + clocks = <&hym8563>; + interrupt-names = "host-wake"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&wifi_wake_host>; + pinctrl-names = "default"; + }; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clock-names = "lpo"; + clocks = <&hym8563>; + device-wakeup-gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wakeup"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&bt_reg_on>, <&bt_wake_host>, <&host_wake_bt>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc_3v3_s3>; + vddio-supply = <&vcc_1v8_s3>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts index 801b40fea4e8..101e2ee9766d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts @@ -196,6 +196,30 @@ vin-supply = <&vcc_12v0_dcin>; }; + vcc_5v0_typec0: regulator-vcc-5v0-typec0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren>; + regulator-name = "vcc_5v0_typec0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_device>; + }; + + vcc_5v0_usbhost: regulator-vcc-5v0-usbhost { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + regulator-name = "vcc_5v0_usbhost"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_device>; + }; + vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 { compatible = "regulator-fixed"; regulator-name = "vcc_3v3_ufs_s0"; @@ -205,6 +229,19 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v0_sys>; }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on>; + reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + }; +}; + +&combphy1_psu { + status = "okay"; }; &combphy0_ps { @@ -246,30 +283,20 @@ &gmac0 { phy-mode = "rgmii-id"; clock_in_out = "output"; - - snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 20000 100000>; - + phy-handle = <&rgmii_phy0>; pinctrl-names = "default"; pinctrl-0 = <ð0m0_miim ð0m0_tx_bus2 ð0m0_rx_bus2 ð0m0_rgmii_clk ð0m0_rgmii_bus>; - - phy-handle = <&rgmii_phy0>; status = "okay"; }; &gmac1 { phy-mode = "rgmii-id"; clock_in_out = "output"; - - snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 20000 100000>; - + phy-handle = <&rgmii_phy1>; pinctrl-names = "default"; pinctrl-0 = <ð1m0_miim ð1m0_tx_bus2 @@ -277,8 +304,6 @@ ð1m0_rgmii_clk ð1m0_rgmii_bus ðm0_clk1_25m_out>; - - phy-handle = <&rgmii_phy1>; status = "okay"; }; @@ -671,6 +696,58 @@ &i2c2 { status = "okay"; + usbc0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_interrupt>; + vbus-supply = <&vcc_5v0_typec0>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + /* fusb302 supports PD Rev 2.0 Ver 1.2 */ + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>; + power-role = "source"; + source-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_hs_ep: endpoint { + remote-endpoint = <&usb_drd0_hs_ep>; + }; + }; + port@1 { + reg = <1>; + usbc0_ss_ep: endpoint { + remote-endpoint = <&usb_drd0_ss_ep>; + }; + }; + port@2 { + reg = <2>; + usbc0_dp_ep: endpoint { + remote-endpoint = <&usbdp_phy_ep>; + }; + }; + }; + }; + }; + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; @@ -708,6 +785,11 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC0_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; }; }; @@ -716,6 +798,11 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; }; }; @@ -728,6 +815,15 @@ }; &pinctrl { + gmac { + gmac0_rst: gmac0-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + gmac1_rst: gmac1-rst { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + headphone { hp_det: hp-det { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -757,6 +853,48 @@ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usb_otg0_pwren: usb-otg0-pwren { + rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usbc0_interrupt: usbc0-interrupt { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + usbc0_sbu1: usbc0-sbu1 { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + usbc0_sbu2: usbc0-sbu2 { + rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-wlan { + wifi_wake_host: wifi-wake-host { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_reg_on: wifi-reg-on { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &sai1 { @@ -784,6 +922,23 @@ status = "okay"; }; +&sdio { + bus-width = <4>; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + wakeup-source; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -798,11 +953,81 @@ status = "okay"; }; +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_usbhost>; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; +/* Used by Bluetooth modules, enabled in a version specific overlay */ +&uart4 { + pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&usb_drd0_dwc3 { + usb-role-switch; + dr_mode = "otg"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_drd0_hs_ep: endpoint { + remote-endpoint = <&usbc0_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + usb_drd0_ss_ep: endpoint { + remote-endpoint = <&usbc0_ss_ep>; + }; + }; + }; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&usbdp_phy { + mode-switch; + orientation-switch; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>; + sbu1-dc-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + usbdp_phy_ep: endpoint { + remote-endpoint = <&usbc0_dp_ep>; + }; + }; +}; + &vop { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts index 0902d694cef4..56527c56830e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts @@ -282,6 +282,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi new file mode 100644 index 000000000000..9187012d6fa4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi @@ -0,0 +1,749 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. + * Copyright (c) 2025 John Clark <inindev@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3576.dtsi" + +/ { + model = "Luckfox Core3576 Module"; + compatible = "luckfox,core3576","rockchip,rk3576"; + + aliases { + mmc0 = &sdhci; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + hdmi-pwr-supply = <&vcc_5v0_hdmi>; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vbus_5v0_typec: regulator-vbus-5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vbus5v0_typec"; + vin-supply = <&vcc_5v0_device>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3_pcie: regulator-vcc-3v3-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_pcie"; + startup-delay-us = <1000>; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_rtc_s5"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_5v0_dcin: regulator-vcc-5v0-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_dcin"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_5v0_device: regulator-vcc-5v0-device { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_device"; + vin-supply = <&vcc_5v0_dcin>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_hdmi: regulator-vcc-5v0-hdmi { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_con_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_hdmi"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_host: regulator-vcc-5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_host"; + vin-supply = <&vcc_5v0_device>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_sys: regulator-vcc-5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_sys"; + vin-supply = <&vcc_5v0_dcin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc_5v0_sys>; + vcc2-supply = <&vcc_5v0_sys>; + vcc3-supply = <&vcc_5v0_sys>; + vcc4-supply = <&vcc_5v0_sys>; + vcc5-supply = <&vcc_5v0_sys>; + vcc6-supply = <&vcc_5v0_sys>; + vcc7-supply = <&vcc_5v0_sys>; + vcc8-supply = <&vcc_5v0_sys>; + vcc9-supply = <&vcc_5v0_sys>; + vcc10-supply = <&vcc_5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + hdmi { + hdmi_con_en: hdmi-con-en { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_reset: pcie-reset { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb_host_pwr_en: usb-host-pwr-en { + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg0_pwr_en: usb-otg0-pwr-en { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&rng { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + full-pwr-cycle-in-suspend; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_host>; + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts new file mode 100644 index 000000000000..6c75959adfe1 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. + * Copyright (c) 2025 John Clark <inindev@gmail.com> + */ + +/dts-v1/; + +#include "rk3576-luckfox-core3576.dtsi" + +/ { + model = "Luckfox Omni3576 Carrier Board"; + compatible = "luckfox,omni3576", "luckfox,core3576", "rockchip,rk3576"; + + aliases { + mmc1 = &sdmmc; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_green_pin>; + + green_led: green-led { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&pinctrl { + leds { + led_green_pin: led-green-pin { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file mode 100644 index 000000000000..cce34c541f7c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts @@ -0,0 +1,941 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd. + * Copyright (c) 2025 John Clark <inindev@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> +#include "rk3576.dtsi" + +/ { + model = "FriendlyElec NanoPi M5"; + compatible = "friendlyarm,nanopi-m5", "rockchip,rk3576"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + hdmi-pwr-supply = <&vcc5v_hdmi_tx>; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + usr_button: key-1 { + debounce-interval = <50>; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + label = "user"; + linux,code = <BTN_1>; + pinctrl-names = "default"; + pinctrl-0 = <&usr_button_l>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; + label = "sys"; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_sys_h>; + }; + + led1: led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + label = "led1"; + linux,default-trigger = "netdev"; + pinctrl-names = "default"; + pinctrl-0 = <&led1_h>; + }; + + led2: led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>; + label = "led2"; + linux,default-trigger = "netdev"; + pinctrl-names = "default"; + pinctrl-0 = <&led2_h>; + }; + }; + + usb3_port2_5v: regulator-usb3-port2-5v { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_host_pwren_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "usb3_port2_5v"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-name = "vcc12v_dcin"; + }; + + vcc3v3_m2_keym: regulator-vcc3v3-m2-keym { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pwren_h>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_m2_keym"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwren_h>; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys_s5"; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_usb_otg0"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v_hdmi_tx"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_l>; + + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "realtek,rt5616-codec"; + + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "IN1P", "Microphone Jack"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack"; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&fspi1m1_pins { + /* gpio1_d5, gpio1_c4-c7 (clk, d0-d4) are for spi nor flash */ + /* gpio1_d0-d4 muxed to sai2 audio functions */ + rockchip,pins = + <1 RK_PD5 3 &pcfg_pull_none>, + <1 RK_PC4 3 &pcfg_pull_none>, + <1 RK_PC5 3 &pcfg_pull_none>, + <1 RK_PC6 3 &pcfg_pull_none>, + <1 RK_PC7 3 &pcfg_pull_none>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð0m0_miim>, + <ð0m0_tx_bus2>, + <ð0m0_rx_bus2>, + <ð0m0_rgmii_clk>, + <ð0m0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð1m0_miim>, + <ð1m0_tx_bus2>, + <ð1m0_rx_bus2>, + <ð1m0_rgmii_clk>, + <ð1m0_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys_s5>; + vcc2-supply = <&vcc5v0_sys_s5>; + vcc3-supply = <&vcc5v0_sys_s5>; + vcc4-supply = <&vcc5v0_sys_s5>; + vcc5-supply = <&vcc5v0_sys_s5>; + vcc6-supply = <&vcc5v0_sys_s5>; + vcc7-supply = <&vcc5v0_sys_s5>; + vcc8-supply = <&vcc5v0_sys_s5>; + vcc9-supply = <&vcc5v0_sys_s5>; + vcc10-supply = <&vcc5v0_sys_s5>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys_s5>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys_s5>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_big_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c5 { + clock-frequency = <200000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5m3_xfer>; + status = "okay"; + + rt5616: audio-codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + assigned-clocks = <&cru CLK_SAI2_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru CLK_SAI2_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&mdio0 { + rgmii_phy0: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC0_OUT>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_int>, <&gmac0_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC1_OUT>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_int>, <&gmac1_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_perstn>; + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_m2_keym>; + status = "okay"; +}; + +&pinctrl { + gmac { + gmac0_int: gmac0-int { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac0_rst: gmac0-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + gmac1_int: gmac1-int { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac1_rst: gmac1-rst { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + usr_button_l: usr-button-l { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + led_sys_h: led-sys-h { + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led1_h: led1-h { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led2_h: led2-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie0_pwren_h: pcie0-pwren-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie0_perstn: pcie0-perstn { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc0_pwren_h: sdmmc0-pwren-h { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sound { + hp_det_l: hp-det-l { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb3_host_pwren_h: usb3-host-pwren-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usb_otg0_pwren_h: usb-otg0-pwren-h { + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_det>, <&sdmmc0_bus4>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc3v3_sd_s0>; + status = "okay"; +}; + +&sfc1 { + pinctrl-names = "default"; + pinctrl-0 = <&fspi1m1_csn0>, <&fspi1m1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + vcc-supply = <&vcc_1v8_s3>; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc5v0_usb_otg0>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&usb3_port2_5v>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "otg"; + extcon = <&u2phy0>; + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts index 6756403111e7..9bc33422ced5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts @@ -37,6 +37,14 @@ }; }; + rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_h>; + radio-type = "wlan"; + shutdown-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; + }; + leds: leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -57,13 +65,13 @@ }; }; - vcc_12v0_dcin: regulator-vcc-12v0-dcin { + vcc_5v0_dcin: regulator-vcc-5v0-dcin { compatible = "regulator-fixed"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-name = "vcc_12v0_dcin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_dcin"; }; vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { @@ -159,6 +167,19 @@ vin-supply = <&vcc_5v0_sys>; }; + vcc_3v3_wifi: regulator-vcc-3v3-wifi { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_wifi_pwr>; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_wifi"; + vin-supply = <&vcc_3v3_s3>; + }; + vcc_5v0_device: regulator-vcc-5v0-device { compatible = "regulator-fixed"; regulator-always-on; @@ -166,7 +187,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "vcc_5v0_device"; - vin-supply = <&vcc_12v0_dcin>; + vin-supply = <&vcc_5v0_sys>; }; vcc_5v0_host: regulator-vcc-5v0-host { @@ -180,7 +201,21 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "vcc5v0_host"; - vin-supply = <&vcc_5v0_device>; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_5v0_otg: regulator-vcc-5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_otg"; + vin-supply = <&vcc_5v0_sys>; }; vcc_5v0_sys: regulator-vcc-5v0-sys { @@ -190,10 +225,14 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "vcc_5v0_sys"; - vin-supply = <&vcc_12v0_dcin>; + vin-supply = <&vcc_5v0_dcin>; }; }; +&combphy0_ps { + status = "okay"; +}; + &combphy1_psu { status = "okay"; }; @@ -265,6 +304,10 @@ }; }; +&hdmi_sound { + status = "okay"; +}; + &hdptxphy { status = "okay"; }; @@ -641,17 +684,27 @@ &mdio0 { rgmii_phy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC0_OUT>; + assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>; + assigned-clock-rates = <25000000>; pinctrl-names = "default"; pinctrl-0 = <&rtl8211f_rst>; reset-assert-us = <20000>; reset-deassert-us = <100000>; - reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; }; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset>; + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie>; + status = "okay"; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { @@ -678,15 +731,35 @@ pcie_pwren: pcie-pwren { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; + pcie_reset: pcie-reset { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; usb { usb_host_pwren: usb-host-pwren { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>; + + }; + }; + + wifi { + usb_wifi_pwr: usb-wifi-pwr { + rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + wifi_en_h: wifi-en-h { + rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; +&sai6 { + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -721,15 +794,38 @@ status = "okay"; }; +&u2phy0_otg { + phy-supply = <&vcc_5v0_otg>; + status = "okay"; +}; + &u2phy1 { status = "okay"; }; +&u2phy1_otg { + phy-supply = <&vcc_5v0_host>; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; +&ufshc { + status = "okay"; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + &usb_drd1_dwc3 { dr_mode = "host"; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 64812e3bcb61..c3cdae8a5494 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -1155,12 +1155,14 @@ <&cru HCLK_VOP>, <&cru DCLK_VP0>, <&cru DCLK_VP1>, - <&cru DCLK_VP2>; + <&cru DCLK_VP2>, + <&hdptxphy>; clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", - "dclk_vp2"; + "dclk_vp2", + "pll_hdmiphy0"; iommus = <&vop_mmu>; power-domains = <&power RK3576_PD_VOP>; rockchip,grf = <&sys_grf>; @@ -1695,6 +1697,22 @@ status = "disabled"; }; + sdio: mmc@2a320000 { + compatible = "rockchip,rk3576-dw-mshc"; + reg = <0x0 0x2a320000 0x0 0x4000>; + clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <200000000>; + pinctrl-0 = <&sdmmc1m0_clk &sdmmc1m0_cmd &sdmmc1m0_bus4>; + pinctrl-names = "default"; + power-domains = <&power RK3576_PD_SDGMAC>; + resets = <&cru SRST_H_SDIO>; + reset-names = "reset"; + status = "disabled"; + }; + sdhci: mmc@2a330000 { compatible = "rockchip,rk3576-dwcmshc", "rockchip,rk3588-dwcmshc"; reg = <0x0 0x2a330000 0x0 0x10000>; @@ -2391,6 +2409,7 @@ reg = <0x0 0x2b000000 0x0 0x2000>; clocks = <&cru CLK_PHY_REF_SRC>, <&cru PCLK_HDPTX_APB>; clock-names = "ref", "apb"; + #clock-cells = <0>; resets = <&cru SRST_P_HDPTX_APB>, <&cru SRST_HDPTX_INIT>, <&cru SRST_HDPTX_CMN>, <&cru SRST_HDPTX_LANE>; reset-names = "apb", "init", "cmn", "lane"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts index ae9274365bed..39197ee19837 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts @@ -373,6 +373,20 @@ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wireless-bluetooth { + bt_reset_pin: bt-reset-pin { + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_pin: bt-wake-pin { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake_host_irq: bt-wake-host-irq { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; }; &pwm1 { @@ -767,6 +781,28 @@ status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&hym8563>; + clock-names = "lpo"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_wake_host_irq &bt_wake_pin &bt_reset_pin>; + vbat-supply = <&vcc_3v3_s3>; + vddio-supply = <&vcc_1v8_s3>; + }; +}; + &usbdp_phy1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 8e912da299a2..ff1ba5ed56ef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -391,6 +391,17 @@ }; }; +&hdmi_receiver_cma { + status = "okay"; +}; + +&hdmi_receiver { + hpd-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; + pinctrl-names = "default"; + status = "okay"; +}; + &hdptxphy0 { status = "okay"; }; @@ -582,6 +593,12 @@ }; + hdmirx { + hdmirx_hpd: hdmirx-5v-detection { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts index 8171fbfd819a..5fbbeb6f5a93 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts @@ -335,6 +335,17 @@ }; }; +&hdmi_receiver_cma { + status = "okay"; +}; + +&hdmi_receiver { + hpd-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; + pinctrl-names = "default"; + status = "okay"; +}; + &hdptxphy0 { status = "okay"; }; @@ -478,6 +489,12 @@ }; }; + hdmirx { + hdmirx_hpd: hdmirx-5v-detection { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pcie { pcie2_0_rst: pcie2-0-rst { rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso new file mode 100644 index 000000000000..7d9b1f080b3f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 Cherry Embedded Solutions GmbH + * + * Device Tree Overlay for the Ethernet Switch adapter for the Mezzanine + * connector on RK3588 Jaguar + * (manual: https://embedded.cherry.de/jaguar-ethernet-switch-user-manual/) + * + * This adapter has a KSZ9896 Ethernet Switch with 4 1GbE Ethernet connectors, + * two user controllable LEDs, and an M12 12-pin connector which exposes the + * following signals: + * - RS232/RS485 (max 250Kbps/500Kbps, RX pin1, TX pin2) + * - two digital inputs (pin4 routed to GPIO3_C5 on SoC, pin5 to GPIO4_B4) + * - two digital outputs (pin7 routed to GPIO3_D3 on SoC, pin8 to GPIO3_D1) + * - two analog inputs (pin10 to channel1 of ADS1015, pin11 to channel2) + * + * RK3588 Jaguar can be powered entirely through the adapter via the M8 3-pin + * connector (12-24V). + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/rockchip,rk3588-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> + +&{/} { + aliases { + ethernet1 = "/ethernet@fe1c0000"; + }; + + mezzanine-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_usr1_pin &led_usr2_pin>; + + led-1 { + gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + label = "USR1"; + }; + + led-2 { + gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + label = "USR2"; + }; + }; +}; + +&gmac1 { + clock_in_out = "output"; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rx_bus2 + &gmac1_tx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus + ð1_pins>; + rx_delay = <0x0>; + tx_delay = <0x0>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c1 { + #address-cells = <1>; + /* + * ADS1015 can handle high-speed (HS) mode (up to 3.4MHz) on I2C bus, + * but SoC can handle only up to 400kHz. + */ + clock-frequency = <400000>; + #size-cells = <0>; + status = "okay"; + + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PC7 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&adc_alert>; + pinctrl-names = "default"; + #io-channel-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <5>; /* Single-ended between AIN1 and GND */ + ti,datarate = <0>; + ti,gain = <5>; + }; + + channel@2 { + reg = <6>; /* Single-ended between AIN2 and GND */ + ti,datarate = <0>; + ti,gain = <5>; + }; + }; + + switch@5f { + compatible = "microchip,ksz9896"; + reg = <0x5f>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; /* ETH_INTRP_N */ + pinctrl-0 = <ð_reset_n ð_intrp_n>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; /* ETH_RESET */ + microchip,synclko-disable; /* CLKO_25_125 only routed to TP1 */ + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + label = "ETH1"; + }; + + lan2: port@1 { + reg = <1>; + label = "ETH2"; + }; + + lan3: port@2 { + reg = <2>; + label = "ETH3"; + }; + + lan4: port@3 { + reg = <3>; + label = "ETH4"; + }; + + port@5 { + reg = <5>; + ethernet = <&gmac1>; + label = "CPU"; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&pinctrl { + adc { + adc_alert: adc-alert-irq { + rockchip,pins = + <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ethernet { + eth_intrp_n: eth-intrp-n { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + eth_reset_n: eth-reset-n { + rockchip,pins = + <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_usr1_pin: led-usr1-pin { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + led_usr2_pin: led-usr2-pin { + rockchip,pins = + <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&uart9 { + /* GPIO3_D0/EN_RS485_MODE for switching between RS232 and RS485 */ + pinctrl-0 = <&uart9m2_xfer &uart9m2_rtsn>; + pinctrl-names = "default"; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts index ebe77cdd24e8..176925d0a1a8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -10,6 +10,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> +#include "rk8xx.h" #include "rk3588.dtsi" / { @@ -693,6 +694,7 @@ vcc13-supply = <&vcc_1v1_nldo_s3>; vcc14-supply = <&vcc_1v1_nldo_s3>; vcca-supply = <&vcc5v0_sys>; + rockchip,reset-mode = <RK806_RESTART>; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi new file mode 100644 index 000000000000..973d39a7e0e0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi @@ -0,0 +1,878 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3588.dtsi" + +/ { + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 120 150 180 210 240 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + rfkill-bt { + compatible = "rfkill-gpio"; + label = "rfkill-m2-bt"; + radio-type = "bluetooth"; + shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc3v3_pcie2x1l0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + status = "disabled"; + }; + + vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: regulator-vcc3v3-pcie30 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_vcc3v3_en>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdmi0_sound { + status = "okay"; +}; + +&hdmi1 { + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdmi1_sound { + status = "okay"; +}; + +&hdmi_receiver_cma { + status = "okay"; +}; + +&hdmi_receiver { + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; + pinctrl-names = "default"; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&hdptxphy1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&i2s5_8ch { + status = "okay"; +}; + +&i2s6_8ch { + status = "okay"; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&package_fan0>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map1 { + trip = <&package_fan1>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&pcie2x1l0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_rst>; + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; + status = "okay"; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_2_rst>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_rst>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie2 { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_2_rst: pcie2-2-rst { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie3 { + pcie3_rst: pcie3-rst { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3_vcc3v3_en: pcie3-vcc3v3-en { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdmmc { + max-frequency = <200000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + vcc-supply = <&vcc_3v3_s3>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + /* connected to USB hub, which is powered by vcc5v0_sys */ + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi index 6052787d2560..e5c474e4d02a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi @@ -2,22 +2,9 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3588.dtsi" +#include "rk3588-rock-5b-5bp-5t.dtsi" / { - aliases { - mmc0 = &sdhci; - mmc1 = &sdmmc; - mmc2 = &sdio; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - analog-sound { compatible = "audio-graph-card"; label = "rk3588-es8316"; @@ -35,28 +22,6 @@ pinctrl-0 = <&hp_detect>; }; - hdmi0-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi0_con_in: endpoint { - remote-endpoint = <&hdmi0_out_con>; - }; - }; - }; - - hdmi1-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi1_con_in: endpoint { - remote-endpoint = <&hdmi1_out_con>; - }; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -70,369 +35,19 @@ }; }; - fan: pwm-fan { - compatible = "pwm-fan"; - cooling-levels = <0 120 150 180 210 240 255>; - fan-supply = <&vcc5v0_sys>; - pwms = <&pwm1 0 50000 0>; - #cooling-cells = <2>; - }; - rfkill { compatible = "rfkill-gpio"; label = "rfkill-m2-wlan"; radio-type = "wlan"; shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; }; - - rfkill-bt { - compatible = "rfkill-gpio"; - label = "rfkill-m2-bt"; - radio-type = "bluetooth"; - shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; - }; - - vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_0_vcc3v3_en>; - regulator-name = "vcc3v3_pcie2x1l0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie2x1l2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <5000>; - vin-supply = <&vcc_3v3_s3>; - }; - - vcc3v3_pcie30: regulator-vcc3v3-pcie30 { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie3_vcc3v3_en>; - regulator-name = "vcc3v3_pcie30"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <5000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_host: regulator-vcc5v0-host { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_host"; - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: regulator-vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc_1v1_nldo_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&combphy0_ps { - status = "okay"; -}; - -&combphy1_ps { - status = "okay"; -}; - -&combphy2_psu { - status = "okay"; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&gpu { - mali-supply = <&vdd_gpu_s0>; - status = "okay"; -}; - -&hdmi0 { - status = "okay"; -}; - -&hdmi0_in { - hdmi0_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi0>; - }; -}; - -&hdmi0_out { - hdmi0_out_con: endpoint { - remote-endpoint = <&hdmi0_con_in>; - }; -}; - -&hdmi0_sound { - status = "okay"; -}; - -&hdmi1 { - pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd - &hdmim1_tx1_scl &hdmim1_tx1_sda>; - status = "okay"; -}; - -&hdmi1_in { - hdmi1_in_vp1: endpoint { - remote-endpoint = <&vp1_out_hdmi1>; - }; -}; - -&hdmi1_out { - hdmi1_out_con: endpoint { - remote-endpoint = <&hdmi1_con_in>; - }; -}; - -&hdmi1_sound { - status = "okay"; -}; - -&hdmi_receiver_cma { - status = "okay"; }; &hdmi_receiver { hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; - pinctrl-names = "default"; - status = "okay"; -}; - -&hdptxphy0 { - status = "okay"; -}; - -&hdptxphy1 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0m2_xfer>; - status = "okay"; - - vdd_cpu_big0_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big0_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_big1_s0: regulator@43 { - compatible = "rockchip,rk8603", "rockchip,rk8602"; - reg = <0x43>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big1_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c6 { - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; - wakeup-source; - }; -}; - -&i2c7 { - status = "okay"; - - es8316: audio-codec@11 { - compatible = "everest,es8316"; - reg = <0x11>; - clocks = <&cru I2S0_8CH_MCLKOUT>; - clock-names = "mclk"; - assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; - assigned-clock-rates = <12288000>; - #sound-dai-cells = <0>; - - port { - es8316_p0_0: endpoint { - remote-endpoint = <&i2s0_8ch_p0_0>; - }; - }; - }; -}; - -&i2s0_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_lrck - &i2s0_mclk - &i2s0_sclk - &i2s0_sdi0 - &i2s0_sdo0>; - status = "okay"; - - i2s0_8ch_p0: port { - i2s0_8ch_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&es8316_p0_0>; - }; - }; -}; - -&i2s5_8ch { - status = "okay"; -}; - -&i2s6_8ch { - status = "okay"; -}; - -&package_thermal { - polling-delay = <1000>; - - trips { - package_fan0: package-fan0 { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - package_fan1: package-fan1 { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map0 { - trip = <&package_fan0>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map1 { - trip = <&package_fan1>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; -}; - -&pcie2x1l0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_0_rst>; - reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; - status = "okay"; -}; - -&pcie2x1l2 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_2_rst>; - reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; - status = "okay"; -}; - -&pcie30phy { - status = "okay"; -}; - -&pcie3x4 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie3_rst>; - reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie30>; - status = "okay"; -}; - -&pd_gpu { - domain-supply = <&vdd_gpu_s0>; -}; - &pinctrl { hdmirx { hdmirx_hpd: hdmirx-5v-detection { @@ -440,506 +55,32 @@ }; }; - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - leds { led_rgb_b: led-rgb-b { rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - sound { - hp_detect: hp-detect { - rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pcie2 { - pcie2_0_rst: pcie2-0-rst { - rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - pcie2_0_vcc3v3_en: pcie2-0-vcc-en { rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; - - pcie2_2_rst: pcie2-2-rst { - rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; - pcie3 { - pcie3_rst: pcie3-rst { - rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie3_vcc3v3_en: pcie3-vcc3v3-en { - rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - vref-supply = <&avcc_1v8_s0>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - max-frequency = <200000000>; - no-sdio; - no-mmc; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3_s3>; - vqmmc-supply = <&vccio_sd_s0>; - status = "okay"; -}; - -&sfc { - pinctrl-names = "default"; - pinctrl-0 = <&fspim2_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - vcc-supply = <&vcc_3v3_s3>; - }; -}; - -&spi2 { - status = "okay"; - assigned-clocks = <&cru CLK_SPI2>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; - num-cs = <1>; - - pmic@0 { - compatible = "rockchip,rk806"; - spi-max-frequency = <1000000>; - reg = <0x0>; - - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, - <&rk806_dvs2_null>, <&rk806_dvs3_null>; - - system-power-controller; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc5v0_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc_2v0_pldo_s3>; - vcc12-supply = <&vcc5v0_sys>; - vcc13-supply = <&vcc_1v1_nldo_s3>; - vcc14-supply = <&vcc_1v1_nldo_s3>; - vcca-supply = <&vcc5v0_sys>; - - gpio-controller; - #gpio-cells = <2>; - - rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl1"; - function = "pin_fun0"; - }; - - rk806_dvs2_null: dvs2-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs3_null: dvs3-null-pins { - pins = "gpio_pwrctrl3"; - function = "pin_fun0"; - }; - - regulators { - vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_gpu_s0"; - regulator-enable-ramp-delay = <400>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_cpu_lit_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_log_s0: dcdc-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <750000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_log_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_vdenc_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_ddr_s0: dcdc-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <900000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - vdd2_ddr_s3: dcdc-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vdd2_ddr_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_2v0_pldo_s3: dcdc-reg7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_2v0_pldo_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2000000>; - }; - }; - - vcc_3v3_s3: dcdc-reg8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vddq_ddr_s0: dcdc-reg9 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vddq_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: dcdc-reg10 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avcc_1v8_s0: pldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "avcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s0: pldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avdd_1v2_s0: pldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "avdd_1v2_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3_s0: pldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "vcc_3v3_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd_s0: pldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "vccio_sd_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - pldo6_s3: pldo-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "pldo6_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_0v75_s3: nldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_ddr_pll_s0: nldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "vdd_ddr_pll_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - avdd_0v75_s0: nldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "avdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v85_s0: nldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "vdd_0v85_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v75_s0: nldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; -&tsadc { - status = "okay"; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; -}; - -&u2phy1 { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&u2phy2 { - status = "okay"; -}; - -&u2phy2_host { - /* connected to USB hub, which is powered by vcc5v0_sys */ - phy-supply = <&vcc5v0_sys>; - status = "okay"; -}; - -&u2phy3 { - status = "okay"; -}; - -&u2phy3_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&usbdp_phy1 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - dr_mode = "host"; - status = "okay"; -}; - &usb_host2_xhci { status = "okay"; }; -&vop { - status = "okay"; -}; - -&vop_mmu { +&vcc3v3_pcie2x1l0 { + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_vcc3v3_en>; status = "okay"; }; - -&vp0 { - vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi0_in_vp0>; - }; -}; - -&vp1 { - vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { - reg = <ROCKCHIP_VOP2_EP_HDMI1>; - remote-endpoint = <&hdmi1_in_vp1>; - }; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts new file mode 100644 index 000000000000..258c7400301d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3588-rock-5b-5bp-5t.dtsi" + +/ { + model = "Radxa ROCK 5T"; + compatible = "radxa,rock-5t", "rockchip,rk3588"; + + analog-sound { + compatible = "audio-graph-card"; + label = "rk3588-es8316"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_b>; + + led_rgb_b { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-m2-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; + }; + + vcc3v3_pcie2x1l1: regulator-vcc3v3-pcie2x1l2 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&hdmi_receiver { + hpd-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie2x1l1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_rst>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l1>; + status = "okay"; +}; + +&pinctrl { + hdmirx { + hdmirx_hpd: hdmirx-5v-detection { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_rgb_b: led-rgb-b { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie2 { + pcie2_1_rst: pcie2-1-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie2_0_vcc3v3_en: pcie2-0-vcc-en { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&vcc3v3_pcie2x1l0 { + gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_vcc3v3_en>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index c4933a08dd1e..b44e89e1bb15 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include "rk8xx.h" #include "rk3588.dtsi" / { @@ -440,6 +441,7 @@ vcc13-supply = <&vcc_1v1_nldo_s3>; vcc14-supply = <&vcc_1v1_nldo_s3>; vcca-supply = <&vcc5v0_sys>; + rockchip,reset-mode = <RK806_RESTART>; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index 60ad272982ad..6daea8961fdd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -398,17 +398,6 @@ regulators { vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { - /* - * RK3588's GPU power domain cannot be enabled - * without this regulator active, but it - * doesn't have to be on when the GPU PD is - * disabled. Because the PD binding does not - * currently allow us to express this - * relationship, we have no choice but to do - * this instead: - */ - regulator-always-on; - regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts index 873a2bd6a6de..55fc7cbef58d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -7,6 +7,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/usb/pd.h> #include "rk3588s.dtsi" @@ -456,6 +457,42 @@ cpu-supply = <&vdd_cpu_big1_s0>; }; +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "huiling,hl055fhav028c", "himax,hx8399c"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc3v3_lcd0_n>; + pinctrl-0 = <&lcd_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + rotation = <90>; + vcc-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_panel_in: endpoint { + remote-endpoint = <&dsi0_out_panel>; + }; + }; + }; +}; + +&dsi0_in { + dsi0_in_vp3: endpoint { + remote-endpoint = <&vp3_out_dsi0>; + }; +}; + +&dsi0_out { + dsi0_out_panel: endpoint { + remote-endpoint = <&mipi_panel_in>; + }; +}; + &gpu { mali-supply = <&vdd_gpu_s0>; status = "okay"; @@ -633,6 +670,10 @@ status = "okay"; }; +&mipidcphy0 { + status = "okay"; +}; + &package_thermal { polling-delay = <1000>; @@ -762,11 +803,16 @@ }; }; - lcd_bl_en { + lcd { lcd_bl_en: lcd-bl-en { rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; }; + + lcd_rst: lcd-rst { + rockchip,pins = + <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; pcie-pins { @@ -1239,3 +1285,21 @@ shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; }; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp3 { + #address-cells = <1>; + #size-cells = <0>; + + vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp3>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file mode 100644 index 000000000000..7434ac39246f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts @@ -0,0 +1,840 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588s.dtsi" + +/ { + model = "Firefly Station M3"; + compatible = "firefly,rk3588s-roc-pc", "rockchip,rk3588s"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "rockchip,es8388"; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,pin-switches = "Headphones"; + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + fan: fan { + compatible = "pwm-fan"; + cooling-levels = <60 100 140 160 185 220 255>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm11 0 50000 1>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + default-state = "off"; + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vbus5v0_typec: regulator-vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie20: regulator-vcc3v3-pcie20 { + compatible = "regulator-fixed"; + gpio = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie20"; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m0_xfer>; + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c3 { + status = "okay"; + + es8388: audio-codec@10 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x10>; + clocks = <&cru I2S1_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + assigned-clocks = <&cru I2S1_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie20>; + status = "okay"; +}; + +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headphone { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_pins: led-pins { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211 { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm11 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm11m3_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart7 { + pinctrl-0 = <&uart7m2_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&u2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk8xx.h b/arch/arm64/boot/dts/rockchip/rk8xx.h new file mode 100644 index 000000000000..a6fbef71c064 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk8xx.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */ +/* + * Device Tree defines for Rockchip RK8xx PMICs + * + * Copyright 2025 Cherry Embedded Solutions GmbH + * + * Author: Quentin Schulz <quentin.schulz@cherry.de> + */ + +#ifndef _DT_MFD_ROCKCHIP_RK8XX_H +#define _DT_MFD_ROCKCHIP_RK8XX_H + +/* For use with rockchip,reset-mode property */ +#define RK806_RESTART 0 +#define RK806_RESET 1 +#define RK806_RESET_NOTIFY 2 + +#endif diff --git a/arch/arm64/boot/dts/sophgo/Makefile b/arch/arm64/boot/dts/sophgo/Makefile new file mode 100644 index 000000000000..94f52cd7d994 --- /dev/null +++ b/arch/arm64/boot/dts/sophgo/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_SOPHGO) += sg2000-milkv-duo-module-01-evb.dtb diff --git a/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts new file mode 100644 index 000000000000..a281fee0d76e --- /dev/null +++ b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "sg2000-milkv-duo-module-01.dtsi" + +/ { + model = "Milk-V Duo Module 01 Evaluation Board"; + compatible = "milkv,duo-module-01-evb", "milkv,duo-module-01", "sophgo,sg2000"; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pinctrl { + sdhci0_cfg: sdhci0-cfg { + sdhci0-cd-pins { + pinmux = <PINMUX(PIN_SD0_CD, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + + sdhci0-clk-pins { + pinmux = <PINMUX(PIN_SD0_CLK, 0)>; + bias-pull-up; + drive-strength-microamp = <16100>; + power-source = <3300>; + }; + + sdhci0-cmd-pins { + pinmux = <PINMUX(PIN_SD0_CMD, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + + sdhci0-data-pins { + pinmux = <PINMUX(PIN_SD0_D0, 0)>, + <PINMUX(PIN_SD0_D1, 0)>, + <PINMUX(PIN_SD0_D2, 0)>, + <PINMUX(PIN_SD0_D3, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + }; + + uart0_cfg: uart0-cfg { + uart0-pins { + pinmux = <PINMUX(PIN_UART0_TX, 0)>, + <PINMUX(PIN_UART0_RX, 0)>; + bias-pull-up; + drive-strength-microamp = <10800>; + power-source = <3300>; + }; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0_cfg>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; + disable-wp; + pinctrl-0 = <&sdhci0_cfg>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi new file mode 100644 index 000000000000..32c988f3c58f --- /dev/null +++ b/arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include <dt-bindings/pinctrl/pinctrl-sg2000.h> +#include "sg2000.dtsi" + +/ { + model = "Milk-V Duo Module 01"; + compatible = "milkv,duo-module-01", "sophgo,sg2000"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; +}; + +&osc { + clock-frequency = <25000000>; +}; + +&emmc { + bus-width = <4>; + no-1-8-v; + cap-mmc-hw-reset; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +/* Wi-Fi */ +&sdhci1 { + bus-width = <4>; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; +}; diff --git a/arch/arm64/boot/dts/sophgo/sg2000.dtsi b/arch/arm64/boot/dts/sophgo/sg2000.dtsi new file mode 100644 index 000000000000..51177dfe9ed2 --- /dev/null +++ b/arch/arm64/boot/dts/sophgo/sg2000.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI (nr) + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <riscv/sophgo/cv180x.dtsi> +#include <riscv/sophgo/cv181x.dtsi> + +/ { + compatible = "sophgo,sg2000"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + i-cache-size = <32768>; + d-cache-size = <32768>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x20000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MiB */ + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_on = <0xc4000003>; + cpu_off = <0x84000002>; + }; + + soc { + gic: interrupt-controller@1f01000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x01f01000 0x1000>, + <0x01f02000 0x2000>; + }; + + pinctrl: pinctrl@3001000 { + compatible = "sophgo,sg2000-pinctrl"; + reg = <0x03001000 0x1000>, + <0x05027000 0x1000>; + reg-names = "sys", "rtc"; + }; + + clk: clock-controller@3002000 { + compatible = "sophgo,sg2000-clk"; + reg = <0x03002000 0x1000>; + clocks = <&osc>; + #clock-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + always-on; + clock-frequency = <25000000>; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi index aba90d555f4e..5ac9e72478dd 100644 --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi @@ -133,6 +133,53 @@ }; }; + pwm3_pins_a: pwm3-0 { + pins { + pinmux = <STM32_PINMUX('B', 15, AF7)>; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 15, ANALOG)>; /* TIM3_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('J', 5, AF8)>, /* TIM8_CH1 */ + <STM32_PINMUX('J', 4, AF8)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('J', 5, ANALOG)>, /* TIM8_CH1 */ + <STM32_PINMUX('J', 4, ANALOG)>; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('B', 11, AF9)>; /* TIM12_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 11, ANALOG)>; /* TIM12_CH2 */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins1 { pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */ @@ -209,6 +256,20 @@ }; }; + tim10_counter_pins_a: tim10-counter-0 { + pins { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* TIM10_CH1 */ + bias-disable; + }; + }; + + tim10_counter_sleep_pins_a: tim10-counter-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* TIM10_CH1 */ + bias-disable; + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */ diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 8d87865850a7..303abf915b8e 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -150,7 +150,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - always-on; + arm,no-tick-in-suspend; }; soc@0 { @@ -291,6 +291,273 @@ #access-controller-cells = <1>; ranges; + timers2: timer@40000000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40000000 0x400>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM2>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 1>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + + timers3: timer@40010000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40010000 0x400>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM3>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 2>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + timers4: timer@40020000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40020000 0x400>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM4>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 3>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + + timers5: timer@40030000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40030000 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM5>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 4>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + + timers6: timer@40040000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40040000 0x400>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM6>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 5>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + timer@5 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + + timers7: timer@40050000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40050000 0x400>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM7>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 6>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + timer@6 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timer@40060000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40060000 0x400>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM12>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 10>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timer@40070000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40070000 0x400>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM13>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 11>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@12 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <12>; + status = "disabled"; + }; + }; + + timers14: timer@40080000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40080000 0x400>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM14>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 12>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@13 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <13>; + status = "disabled"; + }; + }; + lptimer1: timer@40090000 { compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer"; reg = <0x40090000 0x400>; @@ -597,6 +864,136 @@ status = "disabled"; }; + timers10: timer@401c0000 { + compatible = "st,stm32mp25-timers"; + reg = <0x401c0000 0x400>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM10>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 8>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@9 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <9>; + status = "disabled"; + }; + }; + + timers11: timer@401d0000 { + compatible = "st,stm32mp25-timers"; + reg = <0x401d0000 0x400>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM11>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 9>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@10 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <10>; + status = "disabled"; + }; + }; + + timers1: timer@40200000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40200000 0x400>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc CK_KER_TIM1>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 0>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timer@40210000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40210000 0x400>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc CK_KER_TIM8>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 7>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart6: serial@40220000 { compatible = "st,stm32h7-uart"; reg = <0x40220000 0x400>; @@ -654,6 +1051,99 @@ status = "disabled"; }; + timers15: timer@40250000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40250000 0x400>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM15>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 13>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@14 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <14>; + status = "disabled"; + }; + }; + + timers16: timer@40260000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40260000 0x400>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM16>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 14>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@15 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <15>; + status = "disabled"; + }; + }; + + timers17: timer@40270000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40270000 0x400>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM17>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 15>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@16 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <16>; + status = "disabled"; + }; + }; + spi5: spi@40280000 { #address-cells = <1>; #size-cells = <0>; @@ -783,6 +1273,40 @@ status = "disabled"; }; + timers20: timer@40320000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40320000 0x400>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc CK_KER_TIM20>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 16>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@19 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <19>; + status = "disabled"; + }; + }; + usart1: serial@40330000 { compatible = "st,stm32h7-uart"; reg = <0x40330000 0x400>; @@ -1495,7 +2019,6 @@ st,bank-ioport = <11>; status = "disabled"; }; - }; exti2: interrupt-controller@46230000 { diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 2f561ad40665..836b1958ce65 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -293,6 +293,64 @@ status = "disabled"; }; +&timers3 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers8 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm8_pins_a>; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@7 { + status = "okay"; + }; +}; + +&timers10 { + status = "disabled"; + counter { + pinctrl-0 = <&tim10_counter_pins_a>; + pinctrl-1 = <&tim10_counter_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&timers12 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + &usart2 { pinctrl-names = "default", "idle", "sleep"; pinctrl-0 = <&usart2_pins_a>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index c6171de9fe88..aad9177930e6 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -33,6 +33,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-pocketbeagle2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb +# Boards with AM62Dx SoC +dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb + # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb @@ -278,24 +281,4 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-j784s4-evm-usxgmii-exp1-exp2.dtb # Enable support for device-tree overlays -DTC_FLAGS_k3-am625-beagleplay += -@ -DTC_FLAGS_k3-am625-phyboard-lyra-rdk += -@ -DTC_FLAGS_k3-am62a7-phyboard-lyra-rdk += -@ -DTC_FLAGS_k3-am625-sk += -@ -DTC_FLAGS_k3-am62-lp-sk += -@ -DTC_FLAGS_k3-am62a7-sk += -@ -DTC_FLAGS_k3-am62p5-sk += -@ -DTC_FLAGS_k3-am642-evm += -@ -DTC_FLAGS_k3-am642-phyboard-electra-rdk += -@ -DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@ -DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ -DTC_FLAGS_k3-am68-sk-base-board += -@ -DTC_FLAGS_k3-am69-sk += -@ -DTC_FLAGS_k3-j7200-common-proc-board += -@ -DTC_FLAGS_k3-j721e-common-proc-board += -@ -DTC_FLAGS_k3-j721e-evm-pcie0-ep += -@ -DTC_FLAGS_k3-j721e-sk += -@ -DTC_FLAGS_k3-j721s2-common-proc-board += -@ -DTC_FLAGS_k3-j722s-evm += -@ -DTC_FLAGS_k3-j784s4-evm += -@ -DTC_FLAGS_k3-j742s2-evm += -@ +DTC_FLAGS := -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index aafdb90c0eb7..4609f366006e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -74,6 +74,22 @@ }; &main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */ + >; + }; + vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ @@ -144,6 +160,14 @@ }; }; +&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vddshv_sdio>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 9e0b6eee9ac7..120ba8f9dd0e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -553,7 +553,6 @@ clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; clock-names = "clk_ahb", "clk_xin"; bus-width = <8>; - mmc-ddr-1_8v; mmc-hs200-1_8v; ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x0>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index 1ea8f64b1b3b..bc2289d74774 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -507,16 +507,16 @@ /* Verdin I2C_2_DSI */ pinctrl_i2c2: main-i2c2-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ - AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ + AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ + AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ >; }; /* Verdin I2C_4_CSI */ pinctrl_i2c3: main-i2c3-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ - AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ + AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ + AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ >; }; @@ -786,8 +786,8 @@ /* Verdin I2C_3_HDMI */ pinctrl_mcu_i2c0: mcu-i2c0-default-pins { pinctrl-single,pins = < - AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ - AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ + AM62X_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ >; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2fbfa3719345..d240165bda9c 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -106,6 +106,22 @@ }; &main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_rgmii2_pins_default: main-rgmii2-default-pins { bootph-all; pinctrl-single,pins = < @@ -195,6 +211,14 @@ }; }; +&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 63e097ddf988..44e7e459f176 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -51,6 +51,7 @@ compatible = "ti,am654-phy-gmii-sel"; reg = <0x4044 0x8>; #phy-cells = <1>; + bootph-all; }; epwm_tbclk: clock-controller@4130 { @@ -96,6 +97,7 @@ #mbox-cells = <1>; interrupt-names = "rx_012"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + bootph-all; }; inta_main_dmss: interrupt-controller@48000000 { @@ -131,6 +133,7 @@ ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + bootph-all; }; main_pktdma: dma-controller@485c0000 { @@ -147,6 +150,8 @@ "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; + bootph-all; + ti,sci = <&dmsc>; ti,sci-dev-id = <30>; ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ @@ -220,16 +225,19 @@ k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; @@ -254,6 +262,7 @@ * firmware on non-MPU processors */ status = "disabled"; + bootph-all; }; main_pmx0: pinctrl@f4000 { @@ -282,6 +291,7 @@ assigned-clock-parents = <&k3_clks 36 3>; power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; ti,timer-pwm; + bootph-all; }; main_timer1: timer@2410000 { @@ -651,6 +661,7 @@ interrupt-names = "host", "peripheral"; maximum-speed = "high-speed"; dr_mode = "otg"; + bootph-all; snps,usb2-gadget-lpm-disable; snps,usb2-lpm-disable; }; @@ -745,6 +756,7 @@ phys = <&phy_gmii_sel 1>; mac-address = [00 00 00 00 00 00]; ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; + bootph-all; }; cpsw_port2: port@2 { @@ -764,6 +776,7 @@ clocks = <&k3_clks 13 0>; clock-names = "fck"; bus_freq = <1000000>; + bootph-all; }; cpts@3d000 { diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 259ae6ebbfb5..9ef1c829a9df 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -17,6 +17,7 @@ chipid: chipid@14 { compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; opp_efuse_table: syscon@18 { @@ -67,6 +68,7 @@ reg = <0 0x100>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + bootph-pre-ram; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index b27759026014..bceead5e288e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -36,6 +36,7 @@ /* 4G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; }; reserved-memory { @@ -151,6 +152,7 @@ regulator-boot-on; enable-active-high; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + bootph-all; }; vcc_3v3_sys: regulator-4 { @@ -297,12 +299,13 @@ AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < - AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ - AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ + AM62AX_IOPAD(0x01ac, PIN_INPUT, 2) /* (B21) MCASP0_AFSR.UART1_RXD */ + AM62AX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A21) MCASP0_ACLKR.UART1_TXD */ AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ >; @@ -320,6 +323,7 @@ AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ >; + bootph-all; }; main_i2c2_pins_default: main-i2c2-default-pins { @@ -356,6 +360,7 @@ AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ >; + bootph-all; }; usr_led_pins_default: usr-led-default-pins { @@ -375,6 +380,7 @@ AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ >; + bootph-all; }; main_rgmii1_pins_default: main-rgmii1-default-pins { @@ -392,6 +398,7 @@ AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */ AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */ >; + bootph-all; }; main_mcasp1_pins_default: main-mcasp1-default-pins { @@ -572,6 +579,7 @@ #interrupt-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", "BT_EN_SOC", "MMC1_SD_EN", @@ -675,10 +683,12 @@ pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; disable-wp; + bootph-all; }; &main_gpio0 { status = "okay"; + bootph-all; }; &main_gpio1 { @@ -693,6 +703,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; }; /* Main UART1 is used for TIFS firmware logs */ @@ -739,10 +750,15 @@ pinctrl-0 = <&main_rgmii1_pins_default>; }; +&phy_gmii_sel { + bootph-all; +}; + &cpsw_port1 { status = "okay"; phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; + bootph-all; }; &cpsw_port2 { @@ -759,6 +775,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; + bootph-all; }; }; @@ -876,3 +893,45 @@ &main_rti4 { status = "reserved"; }; + +&fss { + status = "okay"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + bootph-all; + }; +}; + +&main_pmx0 { + ospi0_pins_default: ospi0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ + AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ + AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ + AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ + AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ + AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ + AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ + AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ + AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ + AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts new file mode 100644 index 000000000000..daea18b0bc61 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * AM62D2 EVM: https://www.ti.com/lit/zip/sprcal5 + * + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-am62d2.dtsi" + +/ { + compatible = "ti,am62d2-evm", "ti,am62d2"; + model = "Texas Instruments AM62D2 EVM"; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &wkup_rtc0; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x2000000>; + alloc-ranges = <0x00 0xc0000000 0x00 0x2000000>; + linux,cma-default; + }; + + secure_tfa_ddr: tfa@80000000 { + reg = <0x00 0x80000000 0x00 0x80000>; + no-map; + }; + + c7x_0_dma_memory_region: c7x-dma-memory@99800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x99800000 0x00 0x100000>; + no-map; + }; + + c7x_0_memory_region: c7x-memory@99900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x99900000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9b800000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9b900000 0x00 0xf00000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c800000 0x00 0x100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0xf00000>; + no-map; + bootph-pre-ram; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x01000000>; + no-map; + }; + }; + + opp-table { + /* Requires VDD_CORE at 0v85 */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + clock-latency-ns = <6000000>; + }; + }; + + vout_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vout_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vmain_pd: regulator-1 { + /* Output of TPS22811 */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vout_pd>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_5v0: regulator-2 { + /* Output of TPS630702RNMR */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_3v3_main: regulator-3 { + /* output of LM5141-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_main"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_mmc1: regulator-4 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vcc_3v3_sys: regulator-5 { + /* output of TPS222965DSGT */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_main>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vddshv_sdio: regulator-6 { + compatible = "regulator-gpio"; + regulator-name = "vddshv_sdio"; + pinctrl-names = "default"; + pinctrl-0 = <&vddshv_sdio_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpios = <&main_gpio1 31 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + bootph-all; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62d-evm:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; +}; + +&mcu_pmx0 { + status = "okay"; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62DX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM62DX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */ + AM62DX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */ + AM62DX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */ + AM62DX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */ + >; + bootph-all; + }; +}; + +/* WKUP UART0 is used for DM firmware logs */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; + status = "reserved"; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ + AM62DX_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ + >; + bootph-all; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */ + AM62DX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */ + >; + bootph-all; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C17) I2C1_SCL */ + AM62DX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (E17) I2C1_SDA */ + >; + bootph-all; + }; + + main_i2c2_pins_default: main-i2c2-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (M22) GPMC0_CSn2.I2C2_SCL */ + AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */ + AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */ + AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */ + AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */ + AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */ + AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */ + AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */ + AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */ + AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */ + AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */ + AM62DX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (E22) MMC1_CLK */ + AM62DX_IOPAD(0x0230, PIN_INPUT, 0) /* (B22) MMC1_DAT0 */ + AM62DX_IOPAD(0x022c, PIN_INPUT, 0) /* (D21) MMC1_DAT1 */ + AM62DX_IOPAD(0x0228, PIN_INPUT, 0) /* (C22) MMC1_DAT2 */ + AM62DX_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62DX_IOPAD(0x0240, PIN_INPUT, 0) /* (E18) MMC1_SDCD */ + >; + bootph-all; + }; + + main_mdio0_pins_default: main-mdio0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ + AM62DX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ + >; + bootph-all; + }; + + main_rgmii1_pins_default: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ + AM62DX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ + AM62DX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ + AM62DX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ + AM62DX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ + AM62DX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ + AM62DX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */ + AM62DX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */ + AM62DX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */ + AM62DX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */ + AM62DX_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */ + AM62DX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */ + >; + bootph-all; + }; + + main_rgmii2_pins_default: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */ + AM62DX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */ + AM62DX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */ + AM62DX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */ + AM62DX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */ + AM62DX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */ + AM62DX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */ + AM62DX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */ + AM62DX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */ + AM62DX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */ + AM62DX_IOPAD(0x0168, PIN_OUTPUT, 0) /* (AB19) RGMII2_TXC */ + AM62DX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (Y19) RGMII2_TX_CTL */ + >; + bootph-all; + }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */ + >; + }; + + vddshv_sdio_pins_default: vddshv-sdio-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x1f4, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO1_31 */ + >; + bootph-all; + }; + + usr_led_pins_default: usr-led-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ + >; + }; +}; + +&mcu_gpio0 { + status = "okay"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + bootph-all; + status = "okay"; + + typec_pd0: usb-power-controller@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + port { + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; + + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "","MMC1_SD_EN", + "VPP_EN", "GPIO_DIX_RST", + "IO_EXP_OPT_EN", "DIX_INT", + "GPIO_eMMC_RSTn", "CPLD2_DONE", + "CPLD2_INTN", "CPLD1_DONE", + "CPLD1_INTN", "USB_TYPEA_OC_INDICATION", + "PCM1_INT", "PCM2_INT", + "GPIO_PCM1_RST", "TEST_GPIO2", + "GPIO_PCM2_RST", "", + "IO_MCAN0_STB", "IO_MCAN1_STB", + "PD_I2C_IRQ", "IO_EXP_TEST_LED"; + }; + + exp2: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PCM6240_BUF_IO_EN", "", + "CPLD1_JTAGENB", "CPLD1_PROGRAMN", + "CPLD2_JTAGENB", "CPLD2_PROGRAMN", + "", "", + "", "CPLD1_TCK", + "CPLD1_TMS", "CPLD1_TDI", + "CPLD1_TDO", "CPLD2_TCK", + "CPLD2_TMS", "CPLD2_TDI", + "CPLD2_TDO", "ADDR1_IO_EXP", + "SoC_I2C0_SCL", "SoC_I2C0_SDA"; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; + status = "okay"; +}; + +&sdhci0 { + /* eMMC */ + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + bootph-all; + status = "okay"; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vddshv_sdio>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + disable-wp; + bootph-all; + status = "okay"; +}; + +&main_gpio0 { + bootph-all; + status = "okay"; +}; + +&main_gpio1 { + bootph-all; + status = "okay"; +}; + +&main_gpio_intr { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; + status = "okay"; +}; + +&usb0 { + usb-role-switch; + + port { + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>, + <&main_rgmii2_pins_default>; + status = "okay"; + + cpts@3d000 { + /* MAP HW3_TS_PUSH to GENF1 */ + ti,pps = <2 1>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-id"; + phy-handle = <&cpsw3g_phy0>; + status = "okay"; +}; + +&cpsw_port2 { + phy-mode = "rgmii-id"; + phy-handle = <&cpsw3g_phy1>; + status = "okay"; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio0_pins_default>; + status = "okay"; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; + + cpsw3g_phy1: ethernet-phy@3 { + reg = <3>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mailbox0_cluster0 { + status = "okay"; + + mbox_r5_0: mbox-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + + mbox_c7x_0: mbox-c7x-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + + mbox_mcu_r5_0: mbox-mcu-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&wkup_r5fss0 { + status = "okay"; +}; + +&wkup_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_r5_0>; + memory-region = <&wkup_r5fss0_core0_dma_memory_region>, + <&wkup_r5fss0_core0_memory_region>; + bootph-pre-ram; +}; + +&mcu_r5fss0 { + status = "okay"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; + firmware-name = "am62d-mcu-r5f0_0-fw"; + status = "okay"; +}; + +&c7x_0 { + mboxes = <&mailbox0_cluster1 &mbox_c7x_0>; + memory-region = <&c7x_0_dma_memory_region>, + <&c7x_0_memory_region>; + firmware-name = "am62d-c71_0-fw"; + status = "okay"; +}; + +/* main_rti4 is used by C7x DSP */ +&main_rti4 { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62d2.dtsi b/arch/arm64/boot/dts/ti/k3-am62d2.dtsi new file mode 100644 index 000000000000..c7d8ab43c72f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62d2.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source for AM62D2 SoC family in Quad core configuration + * + * TRM: https://www.ti.com/lit/pdf/sprujd4 + * + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am62a7.dtsi" + +/ { + model = "Texas Instruments K3 AM62D SoC"; + compatible = "ti,am62d2"; +}; + +/delete-node/ &vpu; /* Video Codec is disabled in AM62D2 SoC */ +/delete-node/ &e5010; /* JPEG Encoder is disabled in AM62D2 SoC */ diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi index fa55c43ca28d..2e5e25a8ca86 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi @@ -259,7 +259,7 @@ main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; - reg = <0x00 0xf4000 0x00 0x2ac>; + reg = <0x00 0xf4000 0x00 0x2b0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi index c7486fb2a5b4..138b9c395be4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi @@ -12,12 +12,29 @@ thermal_zones: thermal-zones { thermal-sensors = <&wkup_vtm0 0>; trips { + main0_alert: main0-alert { + temperature = <115000>; + hysteresis = <2000>; + type = "passive"; + }; + main0_crit: main0-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main0_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; main1_thermal: main1-thermal { @@ -26,12 +43,29 @@ thermal_zones: thermal-zones { thermal-sensors = <&wkup_vtm0 1>; trips { + main1_alert: main1-alert { + temperature = <115000>; + hysteresis = <2000>; + type = "passive"; + }; + main1_crit: main1-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main1_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; main2_thermal: main2-thermal { @@ -40,11 +74,28 @@ thermal_zones: thermal-zones { thermal-sensors = <&wkup_vtm0 2>; trips { + main2_alert: main2-alert { + temperature = <115000>; + hysteresis = <2000>; + type = "passive"; + }; + main2_crit: main2-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main2_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi index 226398c37fa9..a2fdc6741da2 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi @@ -426,14 +426,14 @@ /* Verdin PWM_3_DSI as GPIO */ pinctrl_pwm3_dsi_gpio: main-gpio1-16-default-pins { pinctrl-single,pins = < - AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */ + AM62PX_IOPAD(0x01b8, PIN_INPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */ >; }; /* Verdin SD_1_CD# */ pinctrl_sd1_cd: main-gpio1-48-default-pins { pinctrl-single,pins = < - AM62PX_IOPAD(0x0240, PIN_INPUT, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */ + AM62PX_IOPAD(0x0240, PIN_INPUT_PULLUP, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */ >; }; @@ -717,8 +717,8 @@ /* Verdin I2C_3_HDMI */ pinctrl_mcu_i2c0: mcu-i2c0-default-pins { pinctrl-single,pins = < - AM62PX_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */ - AM62PX_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */ + AM62PX_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62PX_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */ >; }; @@ -848,6 +848,30 @@ }; }; +&main0_alert { + temperature = <95000>; +}; + +&main0_crit { + temperature = <105000>; +}; + +&main1_alert { + temperature = <95000>; +}; + +&main1_crit { + temperature = <105000>; +}; + +&main2_alert { + temperature = <95000>; +}; + +&main2_crit { + temperature = <105000>; +}; + &main_gpio0 { gpio-line-names = "SODIMM_52", diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index 83c37de7d338..899da7896563 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -214,6 +214,14 @@ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_gpio0 { bootph-all; }; @@ -267,6 +275,7 @@ AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */ AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */ >; + bootph-all; }; main_mmc1_pins_default: main-mmc1-default-pins { @@ -547,6 +556,7 @@ phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; status = "okay"; + bootph-all; }; &cpsw_port2 { @@ -562,6 +572,7 @@ cpsw3g_phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi index 140587d02e88..202378d9d5cf 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi @@ -49,6 +49,7 @@ next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 135 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -65,6 +66,7 @@ next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 136 0>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -81,6 +83,7 @@ next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 137 0>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -97,6 +100,7 @@ next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 138 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index ee8337bfbbfd..13e1d36123d5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -203,22 +203,6 @@ >; }; - main_mmc0_pins_default: main-mmc0-default-pins { - bootph-all; - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ - >; - }; - main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < @@ -457,14 +441,6 @@ clock-frequency = <400000>; }; -&sdhci0 { - bootph-all; - status = "okay"; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; -}; - &sdhci1 { /* SD/MMC */ bootph-all; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso index 432751774853..a7e8d4ea98ac 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso @@ -46,6 +46,7 @@ max-functions = /bits/ 8 <1>; phys = <&serdes0_pcie_link>; phy-names = "pcie-phy"; + bootph-all; ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index f63c101b7d61..129524eb5b91 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -322,6 +322,8 @@ &icssg0_mdio { pinctrl-names = "default"; pinctrl-0 = <&icssg0_mdio_pins_default &clkout0_pins_default>; + assigned-clocks = <&k3_clks 157 123>; + assigned-clock-parents = <&k3_clks 157 125>; status = "okay"; icssg0_phy1: ethernet-phy@1 { diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index b085e7361116..61c11dc92d9c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -655,6 +655,7 @@ <0x00 0x32800000 0x00 0x100000>; interrupt-names = "rx_011"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + bootph-all; }; hwspinlock: spinlock@30e00000 { diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index eee072e44a42..d62a0be767c8 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -21,16 +21,19 @@ k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; @@ -43,6 +46,7 @@ chipid: chipid@14 { compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; }; @@ -107,5 +111,6 @@ reg = <0x42050000 0x25c>; power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index c30425960398..e589690c7c82 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -144,6 +144,7 @@ regulator-boot-on; vin-supply = <&vcc3v3_io>; gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; + bootph-all; }; }; @@ -155,12 +156,14 @@ AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ >; + bootph-all; }; ddr_vtt_pins_default: ddr-vtt-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */ >; + bootph-all; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { @@ -168,6 +171,7 @@ AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; + bootph-all; }; push_button_pins_default: push-button-default-pins { @@ -191,6 +195,7 @@ AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ >; + bootph-all; }; wkup_pca554_default: wkup-pca554-default-pins { @@ -206,6 +211,7 @@ AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */ AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */ >; + bootph-all; }; mcu_cpsw_pins_default: mcu-cpsw-default-pins { @@ -248,6 +254,7 @@ AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ >; + bootph-all; }; main_i2c2_pins_default: main-i2c2-default-pins { @@ -281,6 +288,7 @@ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ >; + bootph-all; }; main_mmc1_pins_default: main-mmc1-default-pins { @@ -294,6 +302,7 @@ AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ >; + bootph-all; }; usb1_pins_default: usb1-default-pins { @@ -343,6 +352,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + bootph-all; }; &wkup_i2c0 { @@ -368,6 +378,7 @@ ti,vsel0-state-high; ti,vsel1-state-high; ti,enable-vout-discharge; + bootph-all; }; gpio@38 { @@ -456,6 +467,7 @@ bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; + bootph-all; }; /* @@ -470,6 +482,7 @@ pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &usb1 { @@ -630,3 +643,7 @@ &dss { status = "disabled"; }; + +&wkup_gpio0 { + bootph-all; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso index c3cb752f8cd7..d04dd7a44008 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso +++ b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso @@ -46,6 +46,7 @@ &dwc3_0 { status = "okay"; + bootph-all; }; &usb0_phy { diff --git a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso index 333e423e8bb6..04393f21d712 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso +++ b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso @@ -45,6 +45,7 @@ <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ phys = <&serdes0 PHY_TYPE_USB3 0>; phy-names = "usb3-phy"; + bootph-all; }; &usb0 { diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 5fa70a874d7b..e84c504c87d2 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -344,6 +344,7 @@ J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ >; + bootph-all; }; mcu_mdio_pins_default: mcu-mdio-default-pins { @@ -351,6 +352,7 @@ J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; + bootph-all; }; mcu_mcan0_pins_default: mcu-mcan0-default-pins { @@ -412,6 +414,14 @@ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_gpio0 { status = "okay"; pinctrl-names = "default"; @@ -626,6 +636,7 @@ &davinci_mdio { phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; @@ -635,6 +646,7 @@ &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; + bootph-all; }; &mcu_mcan0 { diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index f28375629739..612ac27643d2 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -568,6 +568,7 @@ J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ >; + bootph-all; }; mcu_mdio_pins_default: mcu-mdio-default-pins { @@ -575,6 +576,7 @@ J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ >; + bootph-all; }; mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins { @@ -630,6 +632,14 @@ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &mailbox0_cluster0 { status = "okay"; interrupts = <436>; @@ -968,6 +978,7 @@ &davinci_mdio { mcu_phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; @@ -978,6 +989,7 @@ status = "okay"; phy-mode = "rgmii-rxid"; phy-handle = <&mcu_phy0>; + bootph-all; }; &mcu_r5fss0_core0 { @@ -1294,8 +1306,12 @@ &serdes_ln_ctrl { idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>, - <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>, - <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>; + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>, + <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>, + <J784S4_SERDES2_LANE0_IP2_UNUSED>, <J784S4_SERDES2_LANE1_IP2_UNUSED>, + <J784S4_SERDES2_LANE2_QSGMII_LANE1>, <J784S4_SERDES2_LANE3_QSGMII_LANE2>, + <J784S4_SERDES4_LANE0_EDP_LANE0>, <J784S4_SERDES4_LANE1_EDP_LANE1>, + <J784S4_SERDES4_LANE2_EDP_LANE2>, <J784S4_SERDES4_LANE3_EDP_LANE3>; }; &serdes_wiz0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 83cf0adb2cb7..62f45377a2c9 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -2067,4 +2067,94 @@ power-domain-names = "a", "b"; dma-coherent; }; + + mcasp0: mcasp@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 209 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 209 0>; + assigned-clock-parents = <&k3_clks 209 1>; + power-domains = <&k3_pds 209 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: mcasp@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 210 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 210 0>; + assigned-clock-parents = <&k3_clks 210 1>; + power-domains = <&k3_pds 210 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: mcasp@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 211 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 211 0>; + assigned-clock-parents = <&k3_clks 211 1>; + power-domains = <&k3_pds 211 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp3: mcasp@2b30000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b30000 0x00 0x2000>, + <0x00 0x02b38000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 212 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 212 0>; + assigned-clock-parents = <&k3_clks 212 1>; + power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp4: mcasp@2b40000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b40000 0x00 0x2000>, + <0x00 0x02b48000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 213 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 213 0>; + assigned-clock-parents = <&k3_clks 213 1>; + power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index a47852fdca70..9d8abfa9afd2 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -282,6 +282,14 @@ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_pmx0 { main_mcan0_pins_default: main-mcan0-default-pins { @@ -346,6 +354,7 @@ J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ >; + bootph-all; }; ospi0_pins_default: ospi0-default-pins { @@ -380,6 +389,7 @@ J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ >; + bootph-all; }; main_usb1_pins_default: main-usb1-default-pins { @@ -424,6 +434,7 @@ cpsw3g_phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; @@ -434,6 +445,7 @@ phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; status = "okay"; + bootph-all; }; &main_gpio1 { @@ -634,7 +646,7 @@ /* P05 - USB2.0_MUX_SEL */ gpio-hog; gpios = <5 GPIO_ACTIVE_LOW>; - output-high; + output-low; }; p01_hog: p01-hog { diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi index 78d7e800b311..5cfa7bf36641 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi @@ -418,6 +418,15 @@ <0x10 0x3>; /* SERDES1 lane0 select */ }; + audio_refclk0: clock@82e0 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e0 0x4>; + clocks = <&k3_clks 157 0>; + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 15>; + #clock-cells = <0>; + }; + audio_refclk1: clock@82e4 { compatible = "ti,am62-audio-refclk"; reg = <0x82e4 0x4>; diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi index 14c6c6a332ef..cdc8570e54b2 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi @@ -56,6 +56,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 135 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -71,6 +72,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 136 0>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -86,6 +88,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 137 0>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -101,6 +104,7 @@ d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 138 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi index 363d68fec387..7c5b0c69897d 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi @@ -131,6 +131,11 @@ compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon"; reg = <0x1a090 0x4>; }; + + acspcie1_proxy_ctrl: clock-controller@1a094 { + compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon"; + reg = <0x1a094 0x4>; + }; }; main_ehrpwm0: pwm@3000000 { @@ -2675,4 +2680,15 @@ power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + bist_main14: bist@33c0000 { + compatible = "ti,j784s4-bist"; + reg = <0x00 0x033c0000 0x00 0x400>, + <0x00 0x0010c1a0 0x00 0x01c>; + reg-names = "cfg", "ctrl_mmr"; + clocks = <&k3_clks 237 7>; + power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>; + bootph-pre-ram; + ti,sci-dev-id = <234>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h index cac7cccc1112..c0f09be8d3f9 100644 --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -8,6 +8,7 @@ #ifndef DTS_ARM64_TI_K3_PINCTRL_H #define DTS_ARM64_TI_K3_PINCTRL_H +#define ST_EN_SHIFT (14) #define PULLUDEN_SHIFT (16) #define PULLTYPESEL_SHIFT (17) #define RXACTIVE_SHIFT (18) @@ -19,6 +20,10 @@ #define DS_PULLUD_EN_SHIFT (27) #define DS_PULLTYPE_SEL_SHIFT (28) +/* Schmitt trigger configuration */ +#define ST_DISABLE (0 << ST_EN_SHIFT) +#define ST_ENABLE (1 << ST_EN_SHIFT) + #define PULL_DISABLE (1 << PULLUDEN_SHIFT) #define PULL_ENABLE (0 << PULLUDEN_SHIFT) @@ -32,9 +37,13 @@ #define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE) #define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP) #define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN) -#define PIN_INPUT (INPUT_EN | PULL_DISABLE) -#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) +#define PIN_INPUT (INPUT_EN | ST_ENABLE | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | ST_ENABLE | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN | ST_ENABLE | PULL_DOWN) +/* Input configurations with Schmitt Trigger disabled */ +#define PIN_INPUT_NOST (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP_NOST (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN_NOST (INPUT_EN | PULL_DOWN) #define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT) @@ -63,6 +72,9 @@ #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62DX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62DX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + #define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index eb5c17d4c7ec..58f87d09366c 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -38,6 +38,7 @@ CONFIG_ARCH_AIROHA=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_APPLE=y +CONFIG_ARCH_AXIADO=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y CONFIG_ARCH_BCM_IPROC=y @@ -45,6 +46,7 @@ CONFIG_ARCH_BCMBCA=y CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BERLIN=y CONFIG_ARCH_BLAIZE=y +CONFIG_ARCH_CIX=y CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_SPARX5=y CONFIG_ARCH_K3=y @@ -66,6 +68,7 @@ CONFIG_ARCH_RENESAS=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_INTEL_SOCFPGA=y +CONFIG_ARCH_SOPHGO=y CONFIG_ARCH_STM32=y CONFIG_ARCH_SYNQUACER=y CONFIG_ARCH_TEGRA=y @@ -266,6 +269,7 @@ CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE=y CONFIG_QCOM_QSEECOM=y CONFIG_QCOM_QSEECOM_UEFISECAPP=y CONFIG_EXYNOS_ACPM_PROTOCOL=m +CONFIG_TEGRA_BPMP=y CONFIG_GNSS=m CONFIG_GNSS_MTK_SERIAL=m CONFIG_MTD=y @@ -581,6 +585,7 @@ CONFIG_SPI_QUP=y CONFIG_SPI_QCOM_GENI=m CONFIG_SPI_S3C64XX=y CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_STM32_OSPI=m CONFIG_SPI_SUN6I=y CONFIG_SPI_TEGRA210_QUAD=m CONFIG_SPI_TEGRA114=m @@ -622,6 +627,7 @@ CONFIG_PINCTRL_QCS615=y CONFIG_PINCTRL_QCS8300=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QDU1000=y +CONFIG_PINCTRL_RP1=m CONFIG_PINCTRL_SA8775P=y CONFIG_PINCTRL_SC7180=y CONFIG_PINCTRL_SC7280=y @@ -654,6 +660,7 @@ CONFIG_PINCTRL_SM8450_LPASS_LPI=m CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m CONFIG_PINCTRL_SM8550_LPASS_LPI=m CONFIG_PINCTRL_SM8650_LPASS_LPI=m +CONFIG_PINCTRL_SOPHGO_SG2000=y CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y @@ -707,6 +714,7 @@ CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m CONFIG_SENSORS_TMP102=m +CONFIG_MISC_RP1=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y @@ -769,11 +777,13 @@ CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI655X_PMIC=y CONFIG_MFD_MAX77620=y +CONFIG_MFD_MAX77759=m CONFIG_MFD_MT6360=y CONFIG_MFD_MT6397=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK8XX_I2C=y CONFIG_MFD_RK8XX_SPI=y +CONFIG_MFD_SEC_ACPM=m CONFIG_MFD_SEC_I2C=y CONFIG_MFD_SL28CPLD=y CONFIG_RZ_MTU3=y @@ -783,6 +793,7 @@ CONFIG_MFD_TPS65219=y CONFIG_MFD_TPS6594_I2C=m CONFIG_MFD_ROHM_BD718XX=y CONFIG_MFD_STM32_LPTIMER=m +CONFIG_MFD_STM32_TIMERS=m CONFIG_MFD_WCD934X=m CONFIG_MFD_KHADAS_MCU=m CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -865,6 +876,7 @@ CONFIG_VIDEO_RENESAS_FCP=m CONFIG_VIDEO_RENESAS_FDP1=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_VIDEO_RCAR_DRIF=m +CONFIG_VIDEO_ROCKCHIP_RGA=m CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m @@ -977,12 +989,12 @@ CONFIG_BACKLIGHT_LP855X=m CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y +CONFIG_SOUND=m +CONFIG_SND=m CONFIG_SND_ALOOP=m CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_SOC=y +CONFIG_SND_SOC=m CONFIG_SND_BCM2835_SOC_I2S=m CONFIG_SND_SOC_FSL_ASRC=m CONFIG_SND_SOC_FSL_MICFIL=m @@ -1019,12 +1031,12 @@ CONFIG_SND_SOC_ROCKCHIP_SAI=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m CONFIG_SND_SOC_RK3399_GRU_SOUND=m -CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_MSIOF=m CONFIG_SND_SOC_RZ=m +CONFIG_SND_SOC_SAMSUNG=m CONFIG_SND_SOC_SOF_TOPLEVEL=y -CONFIG_SND_SOC_SOF_OF=y +CONFIG_SND_SOC_SOF_OF=m CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y CONFIG_SND_SOC_SOF_MT8186=m CONFIG_SND_SOC_SOF_MT8195=m @@ -1055,7 +1067,6 @@ CONFIG_SND_SOC_DA7213=m CONFIG_SND_SOC_ES7134=m CONFIG_SND_SOC_ES7241=m CONFIG_SND_SOC_ES8316=m -CONFIG_SND_SOC_ES8328=m CONFIG_SND_SOC_ES8328_I2C=m CONFIG_SND_SOC_GTM601=m CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m @@ -1073,7 +1084,6 @@ CONFIG_SND_SOC_TLV320AIC32X4_I2C=m CONFIG_SND_SOC_TLV320AIC3X_I2C=m CONFIG_SND_SOC_WCD9335=m CONFIG_SND_SOC_WCD934X=m -CONFIG_SND_SOC_WCD939X=m CONFIG_SND_SOC_WCD939X_SDW=m CONFIG_SND_SOC_WM8524=m CONFIG_SND_SOC_WM8904=m @@ -1245,6 +1255,7 @@ CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RV3028=m CONFIG_RTC_DRV_RV8803=m +CONFIG_RTC_DRV_S32G=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_PCF2127=m @@ -1317,6 +1328,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_FSL_SAI=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_COMMON_CLK_PWM=y +CONFIG_COMMON_CLK_RP1=m CONFIG_COMMON_CLK_RS9_PCIE=y CONFIG_COMMON_CLK_VC3=y CONFIG_COMMON_CLK_VC5=y @@ -1401,6 +1413,8 @@ CONFIG_SDM_DISPCC_845=y CONFIG_SDM_LPASSCC_845=m CONFIG_SDX_GCC_75=y CONFIG_SM_CAMCC_8250=m +CONFIG_SM_CAMCC_8550=m +CONFIG_SM_CAMCC_8650=m CONFIG_SM_DISPCC_6115=m CONFIG_SM_DISPCC_8250=y CONFIG_SM_DISPCC_8450=m @@ -1428,8 +1442,10 @@ CONFIG_SM_VIDEOCC_8250=y CONFIG_SM_VIDEOCC_8550=m CONFIG_QCOM_HFPLL=y CONFIG_CLK_GFM_LPASS_SM8250=m +CONFIG_SM_VIDEOCC_8450=m CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y CONFIG_CLK_RENESAS_VBATTB=m +CONFIG_CLK_SOPHGO_CV1800=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_OMAP=m CONFIG_HWSPINLOCK_QCOM=y @@ -1445,7 +1461,9 @@ CONFIG_BCM2835_MBOX=y CONFIG_QCOM_APCS_IPC=y CONFIG_MTK_ADSP_MBOX=m CONFIG_QCOM_CPUCP_MBOX=m +CONFIG_TEGRA_HSP_MBOX=y CONFIG_QCOM_IPCC=y +CONFIG_CIX_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARM_SMMU=y @@ -1503,6 +1521,8 @@ CONFIG_ARCH_TEGRA_210_SOC=y CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_ARCH_TEGRA_194_SOC=y CONFIG_ARCH_TEGRA_234_SOC=y +CONFIG_ARCH_TEGRA_241_SOC=y +CONFIG_ARCH_TEGRA_264_SOC=y CONFIG_TI_PRUSS=m CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y @@ -1515,11 +1535,14 @@ CONFIG_TI_SCI_PM_DOMAINS=y CONFIG_ARM_IMX_BUS_DEVFREQ=y CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m +CONFIG_PM_DEVFREQ_EVENT=y +CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m CONFIG_EXTCON_PTN5150=m CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_FSL_IFC=y CONFIG_RENESAS_RPCIF=m +CONFIG_STM32_OMM=m CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_IMX8QXP_ADC=m @@ -1531,6 +1554,7 @@ CONFIG_QCOM_SPMI_VADC=m CONFIG_QCOM_SPMI_ADC5=m CONFIG_ROCKCHIP_SARADC=m CONFIG_RZG2L_ADC=m +CONFIG_SOPHGO_CV1800B_ADC=m CONFIG_TI_ADS1015=m CONFIG_TI_AM335X_ADC=m CONFIG_IIO_CROS_EC_SENSORS_CORE=m @@ -1540,6 +1564,7 @@ CONFIG_IIO_CROS_EC_LIGHT_PROX=m CONFIG_SENSORS_ISL29018=m CONFIG_VCNL4000=m CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_IIO_STM32_TIMER_TRIGGER=m CONFIG_IIO_CROS_EC_BARO=m CONFIG_MPL3115=m CONFIG_PWM=y @@ -1558,6 +1583,7 @@ CONFIG_PWM_RENESAS_TPU=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_SL28CPLD=m +CONFIG_PWM_STM32=m CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m CONFIG_PWM_TIECAP=m @@ -1573,6 +1599,7 @@ CONFIG_RESET_IMX7=y CONFIG_RESET_QCOM_AOSS=y CONFIG_RESET_QCOM_PDC=m CONFIG_RESET_RZG2L_USBPHY_CTRL=y +CONFIG_RESET_RZV2H_USB2PHY=m CONFIG_RESET_TI_SCI=y CONFIG_PHY_SNPS_EUSB2=m CONFIG_PHY_XGENE=y @@ -1663,6 +1690,7 @@ CONFIG_FPGA_BRIDGE=m CONFIG_ALTERA_FREEZE_BRIDGE=m CONFIG_FPGA_REGION=m CONFIG_OF_FPGA_REGION=m +CONFIG_OF_OVERLAY=y CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_MUX_GPIO=m @@ -1704,6 +1732,7 @@ CONFIG_INTERCONNECT_QCOM_X1E80100=y CONFIG_COUNTER=m CONFIG_TI_EQEP=m CONFIG_RZ_MTU3_CNT=m +CONFIG_STM32_TIMER_CNT=m CONFIG_HTE=y CONFIG_HTE_TEGRA194=y CONFIG_HTE_TEGRA194_TEST=m @@ -1744,8 +1773,6 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_SHA1_ARM64_CE=y -CONFIG_CRYPTO_SHA512_ARM64_CE=m CONFIG_CRYPTO_SHA3_ARM64=m CONFIG_CRYPTO_SM3_ARM64_CE=m CONFIG_CRYPTO_AES_ARM64_CE_BLK=y diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index c44b0f202a1f..3bb5b513d5ae 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -25,36 +25,6 @@ config CRYPTO_NHPOLY1305_NEON Architecture: arm64 using: - NEON (Advanced SIMD) extensions -config CRYPTO_SHA1_ARM64_CE - tristate "Hash functions: SHA-1 (ARMv8 Crypto Extensions)" - depends on KERNEL_MODE_NEON - select CRYPTO_HASH - select CRYPTO_SHA1 - help - SHA-1 secure hash algorithm (FIPS 180) - - Architecture: arm64 using: - - ARMv8 Crypto Extensions - -config CRYPTO_SHA512_ARM64 - tristate "Hash functions: SHA-384 and SHA-512" - select CRYPTO_HASH - help - SHA-384 and SHA-512 secure hash algorithms (FIPS 180) - - Architecture: arm64 - -config CRYPTO_SHA512_ARM64_CE - tristate "Hash functions: SHA-384 and SHA-512 (ARMv8 Crypto Extensions)" - depends on KERNEL_MODE_NEON - select CRYPTO_HASH - select CRYPTO_SHA512_ARM64 - help - SHA-384 and SHA-512 secure hash algorithms (FIPS 180) - - Architecture: arm64 using: - - ARMv8 Crypto Extensions - config CRYPTO_SHA3_ARM64 tristate "Hash functions: SHA-3 (ARMv8.2 Crypto Extensions)" depends on KERNEL_MODE_NEON diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index c231c980c514..a8b2cdbe202c 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -5,12 +5,6 @@ # Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org> # -obj-$(CONFIG_CRYPTO_SHA1_ARM64_CE) += sha1-ce.o -sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o - -obj-$(CONFIG_CRYPTO_SHA512_ARM64_CE) += sha512-ce.o -sha512-ce-y := sha512-ce-glue.o sha512-ce-core.o - obj-$(CONFIG_CRYPTO_SHA3_ARM64) += sha3-ce.o sha3-ce-y := sha3-ce-glue.o sha3-ce-core.o @@ -53,9 +47,6 @@ aes-ce-blk-y := aes-glue-ce.o aes-ce.o obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o aes-neon-blk-y := aes-glue-neon.o aes-neon.o -obj-$(CONFIG_CRYPTO_SHA512_ARM64) += sha512-arm64.o -sha512-arm64-y := sha512-glue.o sha512-core.o - obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o @@ -64,11 +55,3 @@ aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o obj-$(CONFIG_CRYPTO_AES_ARM64_BS) += aes-neon-bs.o aes-neon-bs-y := aes-neonbs-core.o aes-neonbs-glue.o - -quiet_cmd_perlasm = PERLASM $@ - cmd_perlasm = $(PERL) $(<) void $(@) - -$(obj)/sha512-core.S: $(src)/../lib/crypto/sha2-armv8.pl - $(call cmd,perlasm) - -clean-files += sha512-core.S diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S deleted file mode 100644 index 9b1f2d82a6fe..000000000000 --- a/arch/arm64/crypto/sha1-ce-core.S +++ /dev/null @@ -1,150 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions - * - * Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org> - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - - .text - .arch armv8-a+crypto - - k0 .req v0 - k1 .req v1 - k2 .req v2 - k3 .req v3 - - t0 .req v4 - t1 .req v5 - - dga .req q6 - dgav .req v6 - dgb .req s7 - dgbv .req v7 - - dg0q .req q12 - dg0s .req s12 - dg0v .req v12 - dg1s .req s13 - dg1v .req v13 - dg2s .req s14 - - .macro add_only, op, ev, rc, s0, dg1 - .ifc \ev, ev - add t1.4s, v\s0\().4s, \rc\().4s - sha1h dg2s, dg0s - .ifnb \dg1 - sha1\op dg0q, \dg1, t0.4s - .else - sha1\op dg0q, dg1s, t0.4s - .endif - .else - .ifnb \s0 - add t0.4s, v\s0\().4s, \rc\().4s - .endif - sha1h dg1s, dg0s - sha1\op dg0q, dg2s, t1.4s - .endif - .endm - - .macro add_update, op, ev, rc, s0, s1, s2, s3, dg1 - sha1su0 v\s0\().4s, v\s1\().4s, v\s2\().4s - add_only \op, \ev, \rc, \s1, \dg1 - sha1su1 v\s0\().4s, v\s3\().4s - .endm - - .macro loadrc, k, val, tmp - movz \tmp, :abs_g0_nc:\val - movk \tmp, :abs_g1:\val - dup \k, \tmp - .endm - - /* - * int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, - * int blocks) - */ -SYM_FUNC_START(__sha1_ce_transform) - /* load round constants */ - loadrc k0.4s, 0x5a827999, w6 - loadrc k1.4s, 0x6ed9eba1, w6 - loadrc k2.4s, 0x8f1bbcdc, w6 - loadrc k3.4s, 0xca62c1d6, w6 - - /* load state */ - ld1 {dgav.4s}, [x0] - ldr dgb, [x0, #16] - - /* load sha1_ce_state::finalize */ - ldr_l w4, sha1_ce_offsetof_finalize, x4 - ldr w4, [x0, x4] - - /* load input */ -0: ld1 {v8.4s-v11.4s}, [x1], #64 - sub w2, w2, #1 - -CPU_LE( rev32 v8.16b, v8.16b ) -CPU_LE( rev32 v9.16b, v9.16b ) -CPU_LE( rev32 v10.16b, v10.16b ) -CPU_LE( rev32 v11.16b, v11.16b ) - -1: add t0.4s, v8.4s, k0.4s - mov dg0v.16b, dgav.16b - - add_update c, ev, k0, 8, 9, 10, 11, dgb - add_update c, od, k0, 9, 10, 11, 8 - add_update c, ev, k0, 10, 11, 8, 9 - add_update c, od, k0, 11, 8, 9, 10 - add_update c, ev, k1, 8, 9, 10, 11 - - add_update p, od, k1, 9, 10, 11, 8 - add_update p, ev, k1, 10, 11, 8, 9 - add_update p, od, k1, 11, 8, 9, 10 - add_update p, ev, k1, 8, 9, 10, 11 - add_update p, od, k2, 9, 10, 11, 8 - - add_update m, ev, k2, 10, 11, 8, 9 - add_update m, od, k2, 11, 8, 9, 10 - add_update m, ev, k2, 8, 9, 10, 11 - add_update m, od, k2, 9, 10, 11, 8 - add_update m, ev, k3, 10, 11, 8, 9 - - add_update p, od, k3, 11, 8, 9, 10 - add_only p, ev, k3, 9 - add_only p, od, k3, 10 - add_only p, ev, k3, 11 - add_only p, od - - /* update state */ - add dgbv.2s, dgbv.2s, dg1v.2s - add dgav.4s, dgav.4s, dg0v.4s - - cbz w2, 2f - cond_yield 3f, x5, x6 - b 0b - - /* - * Final block: add padding and total bit count. - * Skip if the input size was not a round multiple of the block size, - * the padding is handled by the C code in that case. - */ -2: cbz x4, 3f - ldr_l w4, sha1_ce_offsetof_count, x4 - ldr x4, [x0, x4] - movi v9.2d, #0 - mov x8, #0x80000000 - movi v10.2d, #0 - ror x7, x4, #29 // ror(lsl(x4, 3), 32) - fmov d8, x8 - mov x4, #0 - mov v11.d[0], xzr - mov v11.d[1], x7 - b 1b - - /* store new state */ -3: st1 {dgav.4s}, [x0] - str dgb, [x0, #16] - mov w0, w2 - ret -SYM_FUNC_END(__sha1_ce_transform) diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c deleted file mode 100644 index 65b6980817e5..000000000000 --- a/arch/arm64/crypto/sha1-ce-glue.c +++ /dev/null @@ -1,118 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions - * - * Copyright (C) 2014 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org> - */ - -#include <asm/neon.h> -#include <asm/simd.h> -#include <crypto/internal/hash.h> -#include <crypto/internal/simd.h> -#include <crypto/sha1.h> -#include <crypto/sha1_base.h> -#include <linux/cpufeature.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> - -MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions"); -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CRYPTO("sha1"); - -struct sha1_ce_state { - struct sha1_state sst; - u32 finalize; -}; - -extern const u32 sha1_ce_offsetof_count; -extern const u32 sha1_ce_offsetof_finalize; - -asmlinkage int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, - int blocks); - -static void sha1_ce_transform(struct sha1_state *sst, u8 const *src, - int blocks) -{ - while (blocks) { - int rem; - - kernel_neon_begin(); - rem = __sha1_ce_transform(container_of(sst, - struct sha1_ce_state, - sst), src, blocks); - kernel_neon_end(); - src += (blocks - rem) * SHA1_BLOCK_SIZE; - blocks = rem; - } -} - -const u32 sha1_ce_offsetof_count = offsetof(struct sha1_ce_state, sst.count); -const u32 sha1_ce_offsetof_finalize = offsetof(struct sha1_ce_state, finalize); - -static int sha1_ce_update(struct shash_desc *desc, const u8 *data, - unsigned int len) -{ - struct sha1_ce_state *sctx = shash_desc_ctx(desc); - - sctx->finalize = 0; - return sha1_base_do_update_blocks(desc, data, len, sha1_ce_transform); -} - -static int sha1_ce_finup(struct shash_desc *desc, const u8 *data, - unsigned int len, u8 *out) -{ - struct sha1_ce_state *sctx = shash_desc_ctx(desc); - bool finalized = false; - - /* - * Allow the asm code to perform the finalization if there is no - * partial data and the input is a round multiple of the block size. - */ - if (len >= SHA1_BLOCK_SIZE) { - unsigned int remain = len - round_down(len, SHA1_BLOCK_SIZE); - - finalized = !remain; - sctx->finalize = finalized; - sha1_base_do_update_blocks(desc, data, len, sha1_ce_transform); - data += len - remain; - len = remain; - } - if (!finalized) { - sctx->finalize = 0; - sha1_base_do_finup(desc, data, len, sha1_ce_transform); - } - return sha1_base_finish(desc, out); -} - -static struct shash_alg alg = { - .init = sha1_base_init, - .update = sha1_ce_update, - .finup = sha1_ce_finup, - .descsize = sizeof(struct sha1_ce_state), - .statesize = SHA1_STATE_SIZE, - .digestsize = SHA1_DIGEST_SIZE, - .base = { - .cra_name = "sha1", - .cra_driver_name = "sha1-ce", - .cra_priority = 200, - .cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY | - CRYPTO_AHASH_ALG_FINUP_MAX, - .cra_blocksize = SHA1_BLOCK_SIZE, - .cra_module = THIS_MODULE, - } -}; - -static int __init sha1_ce_mod_init(void) -{ - return crypto_register_shash(&alg); -} - -static void __exit sha1_ce_mod_fini(void) -{ - crypto_unregister_shash(&alg); -} - -module_cpu_feature_match(SHA1, sha1_ce_mod_init); -module_exit(sha1_ce_mod_fini); diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S deleted file mode 100644 index 91ef68b15fcc..000000000000 --- a/arch/arm64/crypto/sha512-ce-core.S +++ /dev/null @@ -1,206 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * sha512-ce-core.S - core SHA-384/SHA-512 transform using v8 Crypto Extensions - * - * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - - .irp b,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 - .set .Lq\b, \b - .set .Lv\b\().2d, \b - .endr - - .macro sha512h, rd, rn, rm - .inst 0xce608000 | .L\rd | (.L\rn << 5) | (.L\rm << 16) - .endm - - .macro sha512h2, rd, rn, rm - .inst 0xce608400 | .L\rd | (.L\rn << 5) | (.L\rm << 16) - .endm - - .macro sha512su0, rd, rn - .inst 0xcec08000 | .L\rd | (.L\rn << 5) - .endm - - .macro sha512su1, rd, rn, rm - .inst 0xce608800 | .L\rd | (.L\rn << 5) | (.L\rm << 16) - .endm - - /* - * The SHA-512 round constants - */ - .section ".rodata", "a" - .align 4 -.Lsha512_rcon: - .quad 0x428a2f98d728ae22, 0x7137449123ef65cd - .quad 0xb5c0fbcfec4d3b2f, 0xe9b5dba58189dbbc - .quad 0x3956c25bf348b538, 0x59f111f1b605d019 - .quad 0x923f82a4af194f9b, 0xab1c5ed5da6d8118 - .quad 0xd807aa98a3030242, 0x12835b0145706fbe - .quad 0x243185be4ee4b28c, 0x550c7dc3d5ffb4e2 - .quad 0x72be5d74f27b896f, 0x80deb1fe3b1696b1 - .quad 0x9bdc06a725c71235, 0xc19bf174cf692694 - .quad 0xe49b69c19ef14ad2, 0xefbe4786384f25e3 - .quad 0x0fc19dc68b8cd5b5, 0x240ca1cc77ac9c65 - .quad 0x2de92c6f592b0275, 0x4a7484aa6ea6e483 - .quad 0x5cb0a9dcbd41fbd4, 0x76f988da831153b5 - .quad 0x983e5152ee66dfab, 0xa831c66d2db43210 - .quad 0xb00327c898fb213f, 0xbf597fc7beef0ee4 - .quad 0xc6e00bf33da88fc2, 0xd5a79147930aa725 - .quad 0x06ca6351e003826f, 0x142929670a0e6e70 - .quad 0x27b70a8546d22ffc, 0x2e1b21385c26c926 - .quad 0x4d2c6dfc5ac42aed, 0x53380d139d95b3df - .quad 0x650a73548baf63de, 0x766a0abb3c77b2a8 - .quad 0x81c2c92e47edaee6, 0x92722c851482353b - .quad 0xa2bfe8a14cf10364, 0xa81a664bbc423001 - .quad 0xc24b8b70d0f89791, 0xc76c51a30654be30 - .quad 0xd192e819d6ef5218, 0xd69906245565a910 - .quad 0xf40e35855771202a, 0x106aa07032bbd1b8 - .quad 0x19a4c116b8d2d0c8, 0x1e376c085141ab53 - .quad 0x2748774cdf8eeb99, 0x34b0bcb5e19b48a8 - .quad 0x391c0cb3c5c95a63, 0x4ed8aa4ae3418acb - .quad 0x5b9cca4f7763e373, 0x682e6ff3d6b2b8a3 - .quad 0x748f82ee5defb2fc, 0x78a5636f43172f60 - .quad 0x84c87814a1f0ab72, 0x8cc702081a6439ec - .quad 0x90befffa23631e28, 0xa4506cebde82bde9 - .quad 0xbef9a3f7b2c67915, 0xc67178f2e372532b - .quad 0xca273eceea26619c, 0xd186b8c721c0c207 - .quad 0xeada7dd6cde0eb1e, 0xf57d4f7fee6ed178 - .quad 0x06f067aa72176fba, 0x0a637dc5a2c898a6 - .quad 0x113f9804bef90dae, 0x1b710b35131c471b - .quad 0x28db77f523047d84, 0x32caab7b40c72493 - .quad 0x3c9ebe0a15c9bebc, 0x431d67c49c100d4c - .quad 0x4cc5d4becb3e42b6, 0x597f299cfc657e2a - .quad 0x5fcb6fab3ad6faec, 0x6c44198c4a475817 - - .macro dround, i0, i1, i2, i3, i4, rc0, rc1, in0, in1, in2, in3, in4 - .ifnb \rc1 - ld1 {v\rc1\().2d}, [x4], #16 - .endif - add v5.2d, v\rc0\().2d, v\in0\().2d - ext v6.16b, v\i2\().16b, v\i3\().16b, #8 - ext v5.16b, v5.16b, v5.16b, #8 - ext v7.16b, v\i1\().16b, v\i2\().16b, #8 - add v\i3\().2d, v\i3\().2d, v5.2d - .ifnb \in1 - ext v5.16b, v\in3\().16b, v\in4\().16b, #8 - sha512su0 v\in0\().2d, v\in1\().2d - .endif - sha512h q\i3, q6, v7.2d - .ifnb \in1 - sha512su1 v\in0\().2d, v\in2\().2d, v5.2d - .endif - add v\i4\().2d, v\i1\().2d, v\i3\().2d - sha512h2 q\i3, q\i1, v\i0\().2d - .endm - - /* - * int __sha512_ce_transform(struct sha512_state *sst, u8 const *src, - * int blocks) - */ - .text -SYM_FUNC_START(__sha512_ce_transform) - /* load state */ - ld1 {v8.2d-v11.2d}, [x0] - - /* load first 4 round constants */ - adr_l x3, .Lsha512_rcon - ld1 {v20.2d-v23.2d}, [x3], #64 - - /* load input */ -0: ld1 {v12.2d-v15.2d}, [x1], #64 - ld1 {v16.2d-v19.2d}, [x1], #64 - sub w2, w2, #1 - -CPU_LE( rev64 v12.16b, v12.16b ) -CPU_LE( rev64 v13.16b, v13.16b ) -CPU_LE( rev64 v14.16b, v14.16b ) -CPU_LE( rev64 v15.16b, v15.16b ) -CPU_LE( rev64 v16.16b, v16.16b ) -CPU_LE( rev64 v17.16b, v17.16b ) -CPU_LE( rev64 v18.16b, v18.16b ) -CPU_LE( rev64 v19.16b, v19.16b ) - - mov x4, x3 // rc pointer - - mov v0.16b, v8.16b - mov v1.16b, v9.16b - mov v2.16b, v10.16b - mov v3.16b, v11.16b - - // v0 ab cd -- ef gh ab - // v1 cd -- ef gh ab cd - // v2 ef gh ab cd -- ef - // v3 gh ab cd -- ef gh - // v4 -- ef gh ab cd -- - - dround 0, 1, 2, 3, 4, 20, 24, 12, 13, 19, 16, 17 - dround 3, 0, 4, 2, 1, 21, 25, 13, 14, 12, 17, 18 - dround 2, 3, 1, 4, 0, 22, 26, 14, 15, 13, 18, 19 - dround 4, 2, 0, 1, 3, 23, 27, 15, 16, 14, 19, 12 - dround 1, 4, 3, 0, 2, 24, 28, 16, 17, 15, 12, 13 - - dround 0, 1, 2, 3, 4, 25, 29, 17, 18, 16, 13, 14 - dround 3, 0, 4, 2, 1, 26, 30, 18, 19, 17, 14, 15 - dround 2, 3, 1, 4, 0, 27, 31, 19, 12, 18, 15, 16 - dround 4, 2, 0, 1, 3, 28, 24, 12, 13, 19, 16, 17 - dround 1, 4, 3, 0, 2, 29, 25, 13, 14, 12, 17, 18 - - dround 0, 1, 2, 3, 4, 30, 26, 14, 15, 13, 18, 19 - dround 3, 0, 4, 2, 1, 31, 27, 15, 16, 14, 19, 12 - dround 2, 3, 1, 4, 0, 24, 28, 16, 17, 15, 12, 13 - dround 4, 2, 0, 1, 3, 25, 29, 17, 18, 16, 13, 14 - dround 1, 4, 3, 0, 2, 26, 30, 18, 19, 17, 14, 15 - - dround 0, 1, 2, 3, 4, 27, 31, 19, 12, 18, 15, 16 - dround 3, 0, 4, 2, 1, 28, 24, 12, 13, 19, 16, 17 - dround 2, 3, 1, 4, 0, 29, 25, 13, 14, 12, 17, 18 - dround 4, 2, 0, 1, 3, 30, 26, 14, 15, 13, 18, 19 - dround 1, 4, 3, 0, 2, 31, 27, 15, 16, 14, 19, 12 - - dround 0, 1, 2, 3, 4, 24, 28, 16, 17, 15, 12, 13 - dround 3, 0, 4, 2, 1, 25, 29, 17, 18, 16, 13, 14 - dround 2, 3, 1, 4, 0, 26, 30, 18, 19, 17, 14, 15 - dround 4, 2, 0, 1, 3, 27, 31, 19, 12, 18, 15, 16 - dround 1, 4, 3, 0, 2, 28, 24, 12, 13, 19, 16, 17 - - dround 0, 1, 2, 3, 4, 29, 25, 13, 14, 12, 17, 18 - dround 3, 0, 4, 2, 1, 30, 26, 14, 15, 13, 18, 19 - dround 2, 3, 1, 4, 0, 31, 27, 15, 16, 14, 19, 12 - dround 4, 2, 0, 1, 3, 24, 28, 16, 17, 15, 12, 13 - dround 1, 4, 3, 0, 2, 25, 29, 17, 18, 16, 13, 14 - - dround 0, 1, 2, 3, 4, 26, 30, 18, 19, 17, 14, 15 - dround 3, 0, 4, 2, 1, 27, 31, 19, 12, 18, 15, 16 - dround 2, 3, 1, 4, 0, 28, 24, 12 - dround 4, 2, 0, 1, 3, 29, 25, 13 - dround 1, 4, 3, 0, 2, 30, 26, 14 - - dround 0, 1, 2, 3, 4, 31, 27, 15 - dround 3, 0, 4, 2, 1, 24, , 16 - dround 2, 3, 1, 4, 0, 25, , 17 - dround 4, 2, 0, 1, 3, 26, , 18 - dround 1, 4, 3, 0, 2, 27, , 19 - - /* update state */ - add v8.2d, v8.2d, v0.2d - add v9.2d, v9.2d, v1.2d - add v10.2d, v10.2d, v2.2d - add v11.2d, v11.2d, v3.2d - - cond_yield 3f, x4, x5 - /* handled all input blocks? */ - cbnz w2, 0b - - /* store new state */ -3: st1 {v8.2d-v11.2d}, [x0] - mov w0, w2 - ret -SYM_FUNC_END(__sha512_ce_transform) diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c deleted file mode 100644 index 6fb3001fa2c9..000000000000 --- a/arch/arm64/crypto/sha512-ce-glue.c +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * sha512-ce-glue.c - SHA-384/SHA-512 using ARMv8 Crypto Extensions - * - * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <asm/neon.h> -#include <crypto/internal/hash.h> -#include <crypto/sha2.h> -#include <crypto/sha512_base.h> -#include <linux/cpufeature.h> -#include <linux/kernel.h> -#include <linux/module.h> - -MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash using ARMv8 Crypto Extensions"); -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CRYPTO("sha384"); -MODULE_ALIAS_CRYPTO("sha512"); - -asmlinkage int __sha512_ce_transform(struct sha512_state *sst, u8 const *src, - int blocks); - -static void sha512_ce_transform(struct sha512_state *sst, u8 const *src, - int blocks) -{ - do { - int rem; - - kernel_neon_begin(); - rem = __sha512_ce_transform(sst, src, blocks); - kernel_neon_end(); - src += (blocks - rem) * SHA512_BLOCK_SIZE; - blocks = rem; - } while (blocks); -} - -static int sha512_ce_update(struct shash_desc *desc, const u8 *data, - unsigned int len) -{ - return sha512_base_do_update_blocks(desc, data, len, - sha512_ce_transform); -} - -static int sha512_ce_finup(struct shash_desc *desc, const u8 *data, - unsigned int len, u8 *out) -{ - sha512_base_do_finup(desc, data, len, sha512_ce_transform); - return sha512_base_finish(desc, out); -} - -static struct shash_alg algs[] = { { - .init = sha384_base_init, - .update = sha512_ce_update, - .finup = sha512_ce_finup, - .descsize = SHA512_STATE_SIZE, - .digestsize = SHA384_DIGEST_SIZE, - .base.cra_name = "sha384", - .base.cra_driver_name = "sha384-ce", - .base.cra_priority = 200, - .base.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY | - CRYPTO_AHASH_ALG_FINUP_MAX, - .base.cra_blocksize = SHA512_BLOCK_SIZE, - .base.cra_module = THIS_MODULE, -}, { - .init = sha512_base_init, - .update = sha512_ce_update, - .finup = sha512_ce_finup, - .descsize = SHA512_STATE_SIZE, - .digestsize = SHA512_DIGEST_SIZE, - .base.cra_name = "sha512", - .base.cra_driver_name = "sha512-ce", - .base.cra_priority = 200, - .base.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY | - CRYPTO_AHASH_ALG_FINUP_MAX, - .base.cra_blocksize = SHA512_BLOCK_SIZE, - .base.cra_module = THIS_MODULE, -} }; - -static int __init sha512_ce_mod_init(void) -{ - return crypto_register_shashes(algs, ARRAY_SIZE(algs)); -} - -static void __exit sha512_ce_mod_fini(void) -{ - crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); -} - -module_cpu_feature_match(SHA512, sha512_ce_mod_init); -module_exit(sha512_ce_mod_fini); diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c deleted file mode 100644 index 15aa9d8b7b2c..000000000000 --- a/arch/arm64/crypto/sha512-glue.c +++ /dev/null @@ -1,83 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Linux/arm64 port of the OpenSSL SHA512 implementation for AArch64 - * - * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel@linaro.org> - */ - -#include <crypto/internal/hash.h> -#include <crypto/sha2.h> -#include <crypto/sha512_base.h> -#include <linux/kernel.h> -#include <linux/module.h> - -MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash for arm64"); -MODULE_AUTHOR("Andy Polyakov <appro@openssl.org>"); -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CRYPTO("sha384"); -MODULE_ALIAS_CRYPTO("sha512"); - -asmlinkage void sha512_blocks_arch(u64 *digest, const void *data, - unsigned int num_blks); - -static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src, - int blocks) -{ - sha512_blocks_arch(sst->state, src, blocks); -} - -static int sha512_update(struct shash_desc *desc, const u8 *data, - unsigned int len) -{ - return sha512_base_do_update_blocks(desc, data, len, - sha512_arm64_transform); -} - -static int sha512_finup(struct shash_desc *desc, const u8 *data, - unsigned int len, u8 *out) -{ - sha512_base_do_finup(desc, data, len, sha512_arm64_transform); - return sha512_base_finish(desc, out); -} - -static struct shash_alg algs[] = { { - .digestsize = SHA512_DIGEST_SIZE, - .init = sha512_base_init, - .update = sha512_update, - .finup = sha512_finup, - .descsize = SHA512_STATE_SIZE, - .base.cra_name = "sha512", - .base.cra_driver_name = "sha512-arm64", - .base.cra_priority = 150, - .base.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY | - CRYPTO_AHASH_ALG_FINUP_MAX, - .base.cra_blocksize = SHA512_BLOCK_SIZE, - .base.cra_module = THIS_MODULE, -}, { - .digestsize = SHA384_DIGEST_SIZE, - .init = sha384_base_init, - .update = sha512_update, - .finup = sha512_finup, - .descsize = SHA512_STATE_SIZE, - .base.cra_name = "sha384", - .base.cra_driver_name = "sha384-arm64", - .base.cra_priority = 150, - .base.cra_flags = CRYPTO_AHASH_ALG_BLOCK_ONLY | - CRYPTO_AHASH_ALG_FINUP_MAX, - .base.cra_blocksize = SHA384_BLOCK_SIZE, - .base.cra_module = THIS_MODULE, -} }; - -static int __init sha512_mod_init(void) -{ - return crypto_register_shashes(algs, ARRAY_SIZE(algs)); -} - -static void __exit sha512_mod_fini(void) -{ - crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); -} - -module_init(sha512_mod_init); -module_exit(sha512_mod_fini); diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index a407f9cd549e..c07a58b96329 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -150,7 +150,7 @@ acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor) {} #endif -static inline const char *acpi_get_enable_method(int cpu) +static __always_inline const char *acpi_get_enable_method(int cpu) { if (acpi_psci_present()) return "psci"; diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index ad63457a05c5..c56c21bb1eec 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -41,6 +41,11 @@ /* * Save/restore interrupts. */ + .macro save_and_disable_daif, flags + mrs \flags, daif + msr daifset, #0xf + .endm + .macro save_and_disable_irq, flags mrs \flags, daif msr daifset, #3 diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 99cd6546e72e..09963004ceea 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -87,6 +87,23 @@ int cache_line_size(void); #define dma_get_cache_alignment cache_line_size +/* Compress a u64 MPIDR value into 32 bits. */ +static inline u64 arch_compact_of_hwid(u64 id) +{ + u64 aff3 = MPIDR_AFFINITY_LEVEL(id, 3); + + /* + * These bits are expected to be RES0. If not, return a value with + * the upper 32 bits set to force the caller to give up on 32 bit + * cache ids. + */ + if (FIELD_GET(GENMASK_ULL(63, 40), id)) + return id; + + return (aff3 << 24) | FIELD_GET(GENMASK_ULL(23, 0), id); +} +#define arch_compact_of_hwid arch_compact_of_hwid + /* * Read the effective value of CTR_EL0. * diff --git a/arch/arm64/include/asm/vdso/vsyscall.h b/arch/arm64/include/asm/vdso/vsyscall.h index de58951b8df6..417aae5763a8 100644 --- a/arch/arm64/include/asm/vdso/vsyscall.h +++ b/arch/arm64/include/asm/vdso/vsyscall.h @@ -13,12 +13,11 @@ * Update the vDSO data page to keep in sync with kernel timekeeping. */ static __always_inline -void __arm64_update_vsyscall(struct vdso_time_data *vdata) +void __arch_update_vdso_clock(struct vdso_clock *vc) { - vdata->clock_data[CS_HRES_COARSE].mask = VDSO_PRECISION_MASK; - vdata->clock_data[CS_RAW].mask = VDSO_PRECISION_MASK; + vc->mask = VDSO_PRECISION_MASK; } -#define __arch_update_vsyscall __arm64_update_vsyscall +#define __arch_update_vdso_clock __arch_update_vdso_clock /* The asm-generic header needs to be included after the definitions above */ #include <asm-generic/vdso/vsyscall.h> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 5ae2a34b50bd..fe62218b8e0e 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -614,7 +614,7 @@ SYM_CODE_END(ret_to_kernel) SYM_CODE_START_LOCAL(ret_to_user) ldr x19, [tsk, #TSK_TI_FLAGS] // re-check for single-step enable_step_tsk x19, x2 -#ifdef CONFIG_GCC_PLUGIN_STACKLEAK +#ifdef CONFIG_KSTACK_ERASE bl stackleak_erase_on_task_stack #endif kernel_exit 0 @@ -825,6 +825,7 @@ SYM_CODE_END(__bp_harden_el1_vectors) * */ SYM_FUNC_START(cpu_switch_to) + save_and_disable_daif x11 mov x10, #THREAD_CPU_CONTEXT add x8, x0, x10 mov x9, sp @@ -848,6 +849,7 @@ SYM_FUNC_START(cpu_switch_to) ptrauth_keys_install_kernel x1, x8, x9, x10 scs_save x0 scs_load_current + restore_irq x11 ret SYM_FUNC_END(cpu_switch_to) NOKPROBE(cpu_switch_to) @@ -874,6 +876,7 @@ NOKPROBE(ret_from_fork) * Calls func(regs) using this CPU's irq stack and shadow irq stack. */ SYM_FUNC_START(call_on_irq_stack) + save_and_disable_daif x9 #ifdef CONFIG_SHADOW_CALL_STACK get_current_task x16 scs_save x16 @@ -888,8 +891,10 @@ SYM_FUNC_START(call_on_irq_stack) /* Move to the new stack and call the function there */ add sp, x16, #IRQ_STACK_SIZE + restore_irq x9 blr x1 + save_and_disable_daif x9 /* * Restore the SP from the FP, and restore the FP and LR from the frame * record. @@ -897,6 +902,7 @@ SYM_FUNC_START(call_on_irq_stack) mov sp, x29 ldp x29, x30, [sp], #16 scs_load_current + restore_irq x9 ret SYM_FUNC_END(call_on_irq_stack) NOKPROBE(call_on_irq_stack) diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile index 4d11a8c29181..f440bf57b1a5 100644 --- a/arch/arm64/kernel/pi/Makefile +++ b/arch/arm64/kernel/pi/Makefile @@ -2,7 +2,7 @@ # Copyright 2022 Google LLC KBUILD_CFLAGS := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \ - -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \ + -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_KSTACK_ERASE) \ $(DISABLE_LATENT_ENTROPY_PLUGIN) \ $(call cc-option,-mbranch-protection=none) \ -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \ diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index ee94b72bf8fb..4b001121c72d 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1586,7 +1586,7 @@ enum aarch64_regset { static const struct user_regset aarch64_regsets[] = { [REGSET_GPR] = { - .core_note_type = NT_PRSTATUS, + USER_REGSET_NOTE_TYPE(PRSTATUS), .n = sizeof(struct user_pt_regs) / sizeof(u64), .size = sizeof(u64), .align = sizeof(u64), @@ -1594,7 +1594,7 @@ static const struct user_regset aarch64_regsets[] = { .set = gpr_set }, [REGSET_FPR] = { - .core_note_type = NT_PRFPREG, + USER_REGSET_NOTE_TYPE(PRFPREG), .n = sizeof(struct user_fpsimd_state) / sizeof(u32), /* * We pretend we have 32-bit registers because the fpsr and @@ -1607,7 +1607,7 @@ static const struct user_regset aarch64_regsets[] = { .set = fpr_set }, [REGSET_TLS] = { - .core_note_type = NT_ARM_TLS, + USER_REGSET_NOTE_TYPE(ARM_TLS), .n = 2, .size = sizeof(void *), .align = sizeof(void *), @@ -1616,7 +1616,7 @@ static const struct user_regset aarch64_regsets[] = { }, #ifdef CONFIG_HAVE_HW_BREAKPOINT [REGSET_HW_BREAK] = { - .core_note_type = NT_ARM_HW_BREAK, + USER_REGSET_NOTE_TYPE(ARM_HW_BREAK), .n = sizeof(struct user_hwdebug_state) / sizeof(u32), .size = sizeof(u32), .align = sizeof(u32), @@ -1624,7 +1624,7 @@ static const struct user_regset aarch64_regsets[] = { .set = hw_break_set, }, [REGSET_HW_WATCH] = { - .core_note_type = NT_ARM_HW_WATCH, + USER_REGSET_NOTE_TYPE(ARM_HW_WATCH), .n = sizeof(struct user_hwdebug_state) / sizeof(u32), .size = sizeof(u32), .align = sizeof(u32), @@ -1633,7 +1633,7 @@ static const struct user_regset aarch64_regsets[] = { }, #endif [REGSET_SYSTEM_CALL] = { - .core_note_type = NT_ARM_SYSTEM_CALL, + USER_REGSET_NOTE_TYPE(ARM_SYSTEM_CALL), .n = 1, .size = sizeof(int), .align = sizeof(int), @@ -1641,7 +1641,7 @@ static const struct user_regset aarch64_regsets[] = { .set = system_call_set, }, [REGSET_FPMR] = { - .core_note_type = NT_ARM_FPMR, + USER_REGSET_NOTE_TYPE(ARM_FPMR), .n = 1, .size = sizeof(u64), .align = sizeof(u64), @@ -1650,7 +1650,7 @@ static const struct user_regset aarch64_regsets[] = { }, #ifdef CONFIG_ARM64_SVE [REGSET_SVE] = { /* Scalable Vector Extension */ - .core_note_type = NT_ARM_SVE, + USER_REGSET_NOTE_TYPE(ARM_SVE), .n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX, SVE_PT_REGS_SVE), SVE_VQ_BYTES), @@ -1662,7 +1662,7 @@ static const struct user_regset aarch64_regsets[] = { #endif #ifdef CONFIG_ARM64_SME [REGSET_SSVE] = { /* Streaming mode SVE */ - .core_note_type = NT_ARM_SSVE, + USER_REGSET_NOTE_TYPE(ARM_SSVE), .n = DIV_ROUND_UP(SVE_PT_SIZE(SME_VQ_MAX, SVE_PT_REGS_SVE), SVE_VQ_BYTES), .size = SVE_VQ_BYTES, @@ -1671,7 +1671,7 @@ static const struct user_regset aarch64_regsets[] = { .set = ssve_set, }, [REGSET_ZA] = { /* SME ZA */ - .core_note_type = NT_ARM_ZA, + USER_REGSET_NOTE_TYPE(ARM_ZA), /* * ZA is a single register but it's variably sized and * the ptrace core requires that the size of any data @@ -1687,7 +1687,7 @@ static const struct user_regset aarch64_regsets[] = { .set = za_set, }, [REGSET_ZT] = { /* SME ZT */ - .core_note_type = NT_ARM_ZT, + USER_REGSET_NOTE_TYPE(ARM_ZT), .n = 1, .size = ZT_SIG_REG_BYTES, .align = sizeof(u64), @@ -1697,7 +1697,7 @@ static const struct user_regset aarch64_regsets[] = { #endif #ifdef CONFIG_ARM64_PTR_AUTH [REGSET_PAC_MASK] = { - .core_note_type = NT_ARM_PAC_MASK, + USER_REGSET_NOTE_TYPE(ARM_PAC_MASK), .n = sizeof(struct user_pac_mask) / sizeof(u64), .size = sizeof(u64), .align = sizeof(u64), @@ -1705,7 +1705,7 @@ static const struct user_regset aarch64_regsets[] = { /* this cannot be set dynamically */ }, [REGSET_PAC_ENABLED_KEYS] = { - .core_note_type = NT_ARM_PAC_ENABLED_KEYS, + USER_REGSET_NOTE_TYPE(ARM_PAC_ENABLED_KEYS), .n = 1, .size = sizeof(long), .align = sizeof(long), @@ -1714,7 +1714,7 @@ static const struct user_regset aarch64_regsets[] = { }, #ifdef CONFIG_CHECKPOINT_RESTORE [REGSET_PACA_KEYS] = { - .core_note_type = NT_ARM_PACA_KEYS, + USER_REGSET_NOTE_TYPE(ARM_PACA_KEYS), .n = sizeof(struct user_pac_address_keys) / sizeof(__uint128_t), .size = sizeof(__uint128_t), .align = sizeof(__uint128_t), @@ -1722,7 +1722,7 @@ static const struct user_regset aarch64_regsets[] = { .set = pac_address_keys_set, }, [REGSET_PACG_KEYS] = { - .core_note_type = NT_ARM_PACG_KEYS, + USER_REGSET_NOTE_TYPE(ARM_PACG_KEYS), .n = sizeof(struct user_pac_generic_keys) / sizeof(__uint128_t), .size = sizeof(__uint128_t), .align = sizeof(__uint128_t), @@ -1733,7 +1733,7 @@ static const struct user_regset aarch64_regsets[] = { #endif #ifdef CONFIG_ARM64_TAGGED_ADDR_ABI [REGSET_TAGGED_ADDR_CTRL] = { - .core_note_type = NT_ARM_TAGGED_ADDR_CTRL, + USER_REGSET_NOTE_TYPE(ARM_TAGGED_ADDR_CTRL), .n = 1, .size = sizeof(long), .align = sizeof(long), @@ -1743,7 +1743,7 @@ static const struct user_regset aarch64_regsets[] = { #endif #ifdef CONFIG_ARM64_POE [REGSET_POE] = { - .core_note_type = NT_ARM_POE, + USER_REGSET_NOTE_TYPE(ARM_POE), .n = 1, .size = sizeof(long), .align = sizeof(long), @@ -1753,7 +1753,7 @@ static const struct user_regset aarch64_regsets[] = { #endif #ifdef CONFIG_ARM64_GCS [REGSET_GCS] = { - .core_note_type = NT_ARM_GCS, + USER_REGSET_NOTE_TYPE(ARM_GCS), .n = sizeof(struct user_gcs) / sizeof(u64), .size = sizeof(u64), .align = sizeof(u64), @@ -1943,7 +1943,7 @@ static int compat_tls_set(struct task_struct *target, static const struct user_regset aarch32_regsets[] = { [REGSET_COMPAT_GPR] = { - .core_note_type = NT_PRSTATUS, + USER_REGSET_NOTE_TYPE(PRSTATUS), .n = COMPAT_ELF_NGREG, .size = sizeof(compat_elf_greg_t), .align = sizeof(compat_elf_greg_t), @@ -1951,7 +1951,7 @@ static const struct user_regset aarch32_regsets[] = { .set = compat_gpr_set }, [REGSET_COMPAT_VFP] = { - .core_note_type = NT_ARM_VFP, + USER_REGSET_NOTE_TYPE(ARM_VFP), .n = VFP_STATE_SIZE / sizeof(compat_ulong_t), .size = sizeof(compat_ulong_t), .align = sizeof(compat_ulong_t), @@ -1968,7 +1968,7 @@ static const struct user_regset_view user_aarch32_view = { static const struct user_regset aarch32_ptrace_regsets[] = { [REGSET_GPR] = { - .core_note_type = NT_PRSTATUS, + USER_REGSET_NOTE_TYPE(PRSTATUS), .n = COMPAT_ELF_NGREG, .size = sizeof(compat_elf_greg_t), .align = sizeof(compat_elf_greg_t), @@ -1976,7 +1976,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = { .set = compat_gpr_set }, [REGSET_FPR] = { - .core_note_type = NT_ARM_VFP, + USER_REGSET_NOTE_TYPE(ARM_VFP), .n = VFP_STATE_SIZE / sizeof(compat_ulong_t), .size = sizeof(compat_ulong_t), .align = sizeof(compat_ulong_t), @@ -1984,7 +1984,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = { .set = compat_vfp_set }, [REGSET_TLS] = { - .core_note_type = NT_ARM_TLS, + USER_REGSET_NOTE_TYPE(ARM_TLS), .n = 1, .size = sizeof(compat_ulong_t), .align = sizeof(compat_ulong_t), @@ -1993,7 +1993,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = { }, #ifdef CONFIG_HAVE_HW_BREAKPOINT [REGSET_HW_BREAK] = { - .core_note_type = NT_ARM_HW_BREAK, + USER_REGSET_NOTE_TYPE(ARM_HW_BREAK), .n = sizeof(struct user_hwdebug_state) / sizeof(u32), .size = sizeof(u32), .align = sizeof(u32), @@ -2001,7 +2001,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = { .set = hw_break_set, }, [REGSET_HW_WATCH] = { - .core_note_type = NT_ARM_HW_WATCH, + USER_REGSET_NOTE_TYPE(ARM_HW_WATCH), .n = sizeof(struct user_hwdebug_state) / sizeof(u32), .size = sizeof(u32), .align = sizeof(u32), @@ -2010,7 +2010,7 @@ static const struct user_regset aarch32_ptrace_regsets[] = { }, #endif [REGSET_SYSTEM_CALL] = { - .core_note_type = NT_ARM_SYSTEM_CALL, + USER_REGSET_NOTE_TYPE(ARM_SYSTEM_CALL), .n = 1, .size = sizeof(int), .align = sizeof(int), diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index 5e27e46aa496..7dec05dd33b7 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -36,7 +36,8 @@ ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO # -Wmissing-prototypes and -Wmissing-declarations are removed from # the CFLAGS to make possible to build the kernel with CONFIG_WERROR enabled. CC_FLAGS_REMOVE_VDSO := $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) \ - $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) \ + $(RANDSTRUCT_CFLAGS) $(KSTACK_ERASE_CFLAGS) \ + $(GCC_PLUGINS_CFLAGS) \ $(CC_FLAGS_LTO) $(CC_FLAGS_CFI) \ -Wmissing-prototypes -Wmissing-declarations diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile index a76522d63c3e..0b0a68b663d4 100644 --- a/arch/arm64/kvm/hyp/nvhe/Makefile +++ b/arch/arm64/kvm/hyp/nvhe/Makefile @@ -12,7 +12,7 @@ asflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS ccflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS -D__DISABLE_TRACE_MMIO__ ccflags-y += -fno-stack-protector \ -DDISABLE_BRANCH_PROFILING \ - $(DISABLE_STACKLEAK_PLUGIN) + $(DISABLE_KSTACK_ERASE) hostprogs := gen-hyprel HOST_EXTRACFLAGS += -I$(objtree)/include diff --git a/arch/arm64/lib/.gitignore b/arch/arm64/lib/.gitignore new file mode 100644 index 000000000000..647d7a922e68 --- /dev/null +++ b/arch/arm64/lib/.gitignore @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only + +# This now-removed directory used to contain generated files. +/crypto/ diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index 027bfa9689c6..633e5223d944 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 - -obj-y += crypto/ - lib-y := clear_user.o delay.o copy_from_user.o \ copy_to_user.o copy_page.o \ clear_page.o csum.o insn.o memchr.o memcpy.o \ @@ -16,12 +13,6 @@ endif lib-$(CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE) += uaccess_flushcache.o -obj-$(CONFIG_CRC32_ARCH) += crc32-arm64.o -crc32-arm64-y := crc32.o crc32-core.o - -obj-$(CONFIG_CRC_T10DIF_ARCH) += crc-t10dif-arm64.o -crc-t10dif-arm64-y := crc-t10dif.o crc-t10dif-core.o - obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o obj-$(CONFIG_ARM64_MTE) += mte.o diff --git a/arch/arm64/lib/crc-t10dif-core.S b/arch/arm64/lib/crc-t10dif-core.S deleted file mode 100644 index 87dd6d46224d..000000000000 --- a/arch/arm64/lib/crc-t10dif-core.S +++ /dev/null @@ -1,469 +0,0 @@ -// -// Accelerated CRC-T10DIF using arm64 NEON and Crypto Extensions instructions -// -// Copyright (C) 2016 Linaro Ltd -// Copyright (C) 2019-2024 Google LLC -// -// Authors: Ard Biesheuvel <ardb@google.com> -// Eric Biggers <ebiggers@google.com> -// -// This program is free software; you can redistribute it and/or modify -// it under the terms of the GNU General Public License version 2 as -// published by the Free Software Foundation. -// - -// Derived from the x86 version: -// -// Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions -// -// Copyright (c) 2013, Intel Corporation -// -// Authors: -// Erdinc Ozturk <erdinc.ozturk@intel.com> -// Vinodh Gopal <vinodh.gopal@intel.com> -// James Guilford <james.guilford@intel.com> -// Tim Chen <tim.c.chen@linux.intel.com> -// -// This software is available to you under a choice of one of two -// licenses. You may choose to be licensed under the terms of the GNU -// General Public License (GPL) Version 2, available from the file -// COPYING in the main directory of this source tree, or the -// OpenIB.org BSD license below: -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions are -// met: -// -// * Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// -// * Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the -// distribution. -// -// * Neither the name of the Intel Corporation nor the names of its -// contributors may be used to endorse or promote products derived from -// this software without specific prior written permission. -// -// -// THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY -// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR -// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -// Reference paper titled "Fast CRC Computation for Generic -// Polynomials Using PCLMULQDQ Instruction" -// URL: http://www.intel.com/content/dam/www/public/us/en/documents -// /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf -// - -#include <linux/linkage.h> -#include <asm/assembler.h> - - .text - .arch armv8-a+crypto - - init_crc .req w0 - buf .req x1 - len .req x2 - fold_consts_ptr .req x5 - - fold_consts .req v10 - - t3 .req v17 - t4 .req v18 - t5 .req v19 - t6 .req v20 - t7 .req v21 - t8 .req v22 - - perm .req v27 - - .macro pmull16x64_p64, a16, b64, c64 - pmull2 \c64\().1q, \a16\().2d, \b64\().2d - pmull \b64\().1q, \a16\().1d, \b64\().1d - .endm - - /* - * Pairwise long polynomial multiplication of two 16-bit values - * - * { w0, w1 }, { y0, y1 } - * - * by two 64-bit values - * - * { x0, x1, x2, x3, x4, x5, x6, x7 }, { z0, z1, z2, z3, z4, z5, z6, z7 } - * - * where each vector element is a byte, ordered from least to most - * significant. - * - * This can be implemented using 8x8 long polynomial multiplication, by - * reorganizing the input so that each pairwise 8x8 multiplication - * produces one of the terms from the decomposition below, and - * combining the results of each rank and shifting them into place. - * - * Rank - * 0 w0*x0 ^ | y0*z0 ^ - * 1 (w0*x1 ^ w1*x0) << 8 ^ | (y0*z1 ^ y1*z0) << 8 ^ - * 2 (w0*x2 ^ w1*x1) << 16 ^ | (y0*z2 ^ y1*z1) << 16 ^ - * 3 (w0*x3 ^ w1*x2) << 24 ^ | (y0*z3 ^ y1*z2) << 24 ^ - * 4 (w0*x4 ^ w1*x3) << 32 ^ | (y0*z4 ^ y1*z3) << 32 ^ - * 5 (w0*x5 ^ w1*x4) << 40 ^ | (y0*z5 ^ y1*z4) << 40 ^ - * 6 (w0*x6 ^ w1*x5) << 48 ^ | (y0*z6 ^ y1*z5) << 48 ^ - * 7 (w0*x7 ^ w1*x6) << 56 ^ | (y0*z7 ^ y1*z6) << 56 ^ - * 8 w1*x7 << 64 | y1*z7 << 64 - * - * The inputs can be reorganized into - * - * { w0, w0, w0, w0, y0, y0, y0, y0 }, { w1, w1, w1, w1, y1, y1, y1, y1 } - * { x0, x2, x4, x6, z0, z2, z4, z6 }, { x1, x3, x5, x7, z1, z3, z5, z7 } - * - * and after performing 8x8->16 bit long polynomial multiplication of - * each of the halves of the first vector with those of the second one, - * we obtain the following four vectors of 16-bit elements: - * - * a := { w0*x0, w0*x2, w0*x4, w0*x6 }, { y0*z0, y0*z2, y0*z4, y0*z6 } - * b := { w0*x1, w0*x3, w0*x5, w0*x7 }, { y0*z1, y0*z3, y0*z5, y0*z7 } - * c := { w1*x0, w1*x2, w1*x4, w1*x6 }, { y1*z0, y1*z2, y1*z4, y1*z6 } - * d := { w1*x1, w1*x3, w1*x5, w1*x7 }, { y1*z1, y1*z3, y1*z5, y1*z7 } - * - * Results b and c can be XORed together, as the vector elements have - * matching ranks. Then, the final XOR (*) can be pulled forward, and - * applied between the halves of each of the remaining three vectors, - * which are then shifted into place, and combined to produce two - * 80-bit results. - * - * (*) NOTE: the 16x64 bit polynomial multiply below is not equivalent - * to the 64x64 bit one above, but XOR'ing the outputs together will - * produce the expected result, and this is sufficient in the context of - * this algorithm. - */ - .macro pmull16x64_p8, a16, b64, c64 - ext t7.16b, \b64\().16b, \b64\().16b, #1 - tbl t5.16b, {\a16\().16b}, perm.16b - uzp1 t7.16b, \b64\().16b, t7.16b - bl __pmull_p8_16x64 - ext \b64\().16b, t4.16b, t4.16b, #15 - eor \c64\().16b, t8.16b, t5.16b - .endm - -SYM_FUNC_START_LOCAL(__pmull_p8_16x64) - ext t6.16b, t5.16b, t5.16b, #8 - - pmull t3.8h, t7.8b, t5.8b - pmull t4.8h, t7.8b, t6.8b - pmull2 t5.8h, t7.16b, t5.16b - pmull2 t6.8h, t7.16b, t6.16b - - ext t8.16b, t3.16b, t3.16b, #8 - eor t4.16b, t4.16b, t6.16b - ext t7.16b, t5.16b, t5.16b, #8 - ext t6.16b, t4.16b, t4.16b, #8 - eor t8.8b, t8.8b, t3.8b - eor t5.8b, t5.8b, t7.8b - eor t4.8b, t4.8b, t6.8b - ext t5.16b, t5.16b, t5.16b, #14 - ret -SYM_FUNC_END(__pmull_p8_16x64) - - - // Fold reg1, reg2 into the next 32 data bytes, storing the result back - // into reg1, reg2. - .macro fold_32_bytes, p, reg1, reg2 - ldp q11, q12, [buf], #0x20 - - pmull16x64_\p fold_consts, \reg1, v8 - -CPU_LE( rev64 v11.16b, v11.16b ) -CPU_LE( rev64 v12.16b, v12.16b ) - - pmull16x64_\p fold_consts, \reg2, v9 - -CPU_LE( ext v11.16b, v11.16b, v11.16b, #8 ) -CPU_LE( ext v12.16b, v12.16b, v12.16b, #8 ) - - eor \reg1\().16b, \reg1\().16b, v8.16b - eor \reg2\().16b, \reg2\().16b, v9.16b - eor \reg1\().16b, \reg1\().16b, v11.16b - eor \reg2\().16b, \reg2\().16b, v12.16b - .endm - - // Fold src_reg into dst_reg, optionally loading the next fold constants - .macro fold_16_bytes, p, src_reg, dst_reg, load_next_consts - pmull16x64_\p fold_consts, \src_reg, v8 - .ifnb \load_next_consts - ld1 {fold_consts.2d}, [fold_consts_ptr], #16 - .endif - eor \dst_reg\().16b, \dst_reg\().16b, v8.16b - eor \dst_reg\().16b, \dst_reg\().16b, \src_reg\().16b - .endm - - .macro crc_t10dif_pmull, p - - // For sizes less than 256 bytes, we can't fold 128 bytes at a time. - cmp len, #256 - b.lt .Lless_than_256_bytes_\@ - - adr_l fold_consts_ptr, .Lfold_across_128_bytes_consts - - // Load the first 128 data bytes. Byte swapping is necessary to make - // the bit order match the polynomial coefficient order. - ldp q0, q1, [buf] - ldp q2, q3, [buf, #0x20] - ldp q4, q5, [buf, #0x40] - ldp q6, q7, [buf, #0x60] - add buf, buf, #0x80 -CPU_LE( rev64 v0.16b, v0.16b ) -CPU_LE( rev64 v1.16b, v1.16b ) -CPU_LE( rev64 v2.16b, v2.16b ) -CPU_LE( rev64 v3.16b, v3.16b ) -CPU_LE( rev64 v4.16b, v4.16b ) -CPU_LE( rev64 v5.16b, v5.16b ) -CPU_LE( rev64 v6.16b, v6.16b ) -CPU_LE( rev64 v7.16b, v7.16b ) -CPU_LE( ext v0.16b, v0.16b, v0.16b, #8 ) -CPU_LE( ext v1.16b, v1.16b, v1.16b, #8 ) -CPU_LE( ext v2.16b, v2.16b, v2.16b, #8 ) -CPU_LE( ext v3.16b, v3.16b, v3.16b, #8 ) -CPU_LE( ext v4.16b, v4.16b, v4.16b, #8 ) -CPU_LE( ext v5.16b, v5.16b, v5.16b, #8 ) -CPU_LE( ext v6.16b, v6.16b, v6.16b, #8 ) -CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) - - // XOR the first 16 data *bits* with the initial CRC value. - movi v8.16b, #0 - mov v8.h[7], init_crc - eor v0.16b, v0.16b, v8.16b - - // Load the constants for folding across 128 bytes. - ld1 {fold_consts.2d}, [fold_consts_ptr] - - // Subtract 128 for the 128 data bytes just consumed. Subtract another - // 128 to simplify the termination condition of the following loop. - sub len, len, #256 - - // While >= 128 data bytes remain (not counting v0-v7), fold the 128 - // bytes v0-v7 into them, storing the result back into v0-v7. -.Lfold_128_bytes_loop_\@: - fold_32_bytes \p, v0, v1 - fold_32_bytes \p, v2, v3 - fold_32_bytes \p, v4, v5 - fold_32_bytes \p, v6, v7 - - subs len, len, #128 - b.ge .Lfold_128_bytes_loop_\@ - - // Now fold the 112 bytes in v0-v6 into the 16 bytes in v7. - - // Fold across 64 bytes. - add fold_consts_ptr, fold_consts_ptr, #16 - ld1 {fold_consts.2d}, [fold_consts_ptr], #16 - fold_16_bytes \p, v0, v4 - fold_16_bytes \p, v1, v5 - fold_16_bytes \p, v2, v6 - fold_16_bytes \p, v3, v7, 1 - // Fold across 32 bytes. - fold_16_bytes \p, v4, v6 - fold_16_bytes \p, v5, v7, 1 - // Fold across 16 bytes. - fold_16_bytes \p, v6, v7 - - // Add 128 to get the correct number of data bytes remaining in 0...127 - // (not counting v7), following the previous extra subtraction by 128. - // Then subtract 16 to simplify the termination condition of the - // following loop. - adds len, len, #(128-16) - - // While >= 16 data bytes remain (not counting v7), fold the 16 bytes v7 - // into them, storing the result back into v7. - b.lt .Lfold_16_bytes_loop_done_\@ -.Lfold_16_bytes_loop_\@: - pmull16x64_\p fold_consts, v7, v8 - eor v7.16b, v7.16b, v8.16b - ldr q0, [buf], #16 -CPU_LE( rev64 v0.16b, v0.16b ) -CPU_LE( ext v0.16b, v0.16b, v0.16b, #8 ) - eor v7.16b, v7.16b, v0.16b - subs len, len, #16 - b.ge .Lfold_16_bytes_loop_\@ - -.Lfold_16_bytes_loop_done_\@: - // Add 16 to get the correct number of data bytes remaining in 0...15 - // (not counting v7), following the previous extra subtraction by 16. - adds len, len, #16 - b.eq .Lreduce_final_16_bytes_\@ - -.Lhandle_partial_segment_\@: - // Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first - // 16 bytes are in v7 and the rest are the remaining data in 'buf'. To - // do this without needing a fold constant for each possible 'len', - // redivide the bytes into a first chunk of 'len' bytes and a second - // chunk of 16 bytes, then fold the first chunk into the second. - - // v0 = last 16 original data bytes - add buf, buf, len - ldr q0, [buf, #-16] -CPU_LE( rev64 v0.16b, v0.16b ) -CPU_LE( ext v0.16b, v0.16b, v0.16b, #8 ) - - // v1 = high order part of second chunk: v7 left-shifted by 'len' bytes. - adr_l x4, .Lbyteshift_table + 16 - sub x4, x4, len - ld1 {v2.16b}, [x4] - tbl v1.16b, {v7.16b}, v2.16b - - // v3 = first chunk: v7 right-shifted by '16-len' bytes. - movi v3.16b, #0x80 - eor v2.16b, v2.16b, v3.16b - tbl v3.16b, {v7.16b}, v2.16b - - // Convert to 8-bit masks: 'len' 0x00 bytes, then '16-len' 0xff bytes. - sshr v2.16b, v2.16b, #7 - - // v2 = second chunk: 'len' bytes from v0 (low-order bytes), - // then '16-len' bytes from v1 (high-order bytes). - bsl v2.16b, v1.16b, v0.16b - - // Fold the first chunk into the second chunk, storing the result in v7. - pmull16x64_\p fold_consts, v3, v0 - eor v7.16b, v3.16b, v0.16b - eor v7.16b, v7.16b, v2.16b - b .Lreduce_final_16_bytes_\@ - -.Lless_than_256_bytes_\@: - // Checksumming a buffer of length 16...255 bytes - - adr_l fold_consts_ptr, .Lfold_across_16_bytes_consts - - // Load the first 16 data bytes. - ldr q7, [buf], #0x10 -CPU_LE( rev64 v7.16b, v7.16b ) -CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) - - // XOR the first 16 data *bits* with the initial CRC value. - movi v0.16b, #0 - mov v0.h[7], init_crc - eor v7.16b, v7.16b, v0.16b - - // Load the fold-across-16-bytes constants. - ld1 {fold_consts.2d}, [fold_consts_ptr], #16 - - cmp len, #16 - b.eq .Lreduce_final_16_bytes_\@ // len == 16 - subs len, len, #32 - b.ge .Lfold_16_bytes_loop_\@ // 32 <= len <= 255 - add len, len, #16 - b .Lhandle_partial_segment_\@ // 17 <= len <= 31 - -.Lreduce_final_16_bytes_\@: - .endm - -// -// u16 crc_t10dif_pmull_p8(u16 init_crc, const u8 *buf, size_t len); -// -// Assumes len >= 16. -// -SYM_FUNC_START(crc_t10dif_pmull_p8) - frame_push 1 - - // Compose { 0,0,0,0, 8,8,8,8, 1,1,1,1, 9,9,9,9 } - movi perm.4h, #8, lsl #8 - orr perm.2s, #1, lsl #16 - orr perm.2s, #1, lsl #24 - zip1 perm.16b, perm.16b, perm.16b - zip1 perm.16b, perm.16b, perm.16b - - crc_t10dif_pmull p8 - -CPU_LE( rev64 v7.16b, v7.16b ) -CPU_LE( ext v7.16b, v7.16b, v7.16b, #8 ) - str q7, [x3] - - frame_pop - ret -SYM_FUNC_END(crc_t10dif_pmull_p8) - - .align 5 -// -// u16 crc_t10dif_pmull_p64(u16 init_crc, const u8 *buf, size_t len); -// -// Assumes len >= 16. -// -SYM_FUNC_START(crc_t10dif_pmull_p64) - crc_t10dif_pmull p64 - - // Reduce the 128-bit value M(x), stored in v7, to the final 16-bit CRC. - - movi v2.16b, #0 // init zero register - - // Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'. - ld1 {fold_consts.2d}, [fold_consts_ptr], #16 - - // Fold the high 64 bits into the low 64 bits, while also multiplying by - // x^64. This produces a 128-bit value congruent to x^64 * M(x) and - // whose low 48 bits are 0. - ext v0.16b, v2.16b, v7.16b, #8 - pmull2 v7.1q, v7.2d, fold_consts.2d // high bits * x^48 * (x^80 mod G(x)) - eor v0.16b, v0.16b, v7.16b // + low bits * x^64 - - // Fold the high 32 bits into the low 96 bits. This produces a 96-bit - // value congruent to x^64 * M(x) and whose low 48 bits are 0. - ext v1.16b, v0.16b, v2.16b, #12 // extract high 32 bits - mov v0.s[3], v2.s[0] // zero high 32 bits - pmull v1.1q, v1.1d, fold_consts.1d // high 32 bits * x^48 * (x^48 mod G(x)) - eor v0.16b, v0.16b, v1.16b // + low bits - - // Load G(x) and floor(x^48 / G(x)). - ld1 {fold_consts.2d}, [fold_consts_ptr] - - // Use Barrett reduction to compute the final CRC value. - pmull2 v1.1q, v0.2d, fold_consts.2d // high 32 bits * floor(x^48 / G(x)) - ushr v1.2d, v1.2d, #32 // /= x^32 - pmull v1.1q, v1.1d, fold_consts.1d // *= G(x) - ushr v0.2d, v0.2d, #48 - eor v0.16b, v0.16b, v1.16b // + low 16 nonzero bits - // Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of v0. - - umov w0, v0.h[0] - ret -SYM_FUNC_END(crc_t10dif_pmull_p64) - - .section ".rodata", "a" - .align 4 - -// Fold constants precomputed from the polynomial 0x18bb7 -// G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0 -.Lfold_across_128_bytes_consts: - .quad 0x0000000000006123 // x^(8*128) mod G(x) - .quad 0x0000000000002295 // x^(8*128+64) mod G(x) -// .Lfold_across_64_bytes_consts: - .quad 0x0000000000001069 // x^(4*128) mod G(x) - .quad 0x000000000000dd31 // x^(4*128+64) mod G(x) -// .Lfold_across_32_bytes_consts: - .quad 0x000000000000857d // x^(2*128) mod G(x) - .quad 0x0000000000007acc // x^(2*128+64) mod G(x) -.Lfold_across_16_bytes_consts: - .quad 0x000000000000a010 // x^(1*128) mod G(x) - .quad 0x0000000000001faa // x^(1*128+64) mod G(x) -// .Lfinal_fold_consts: - .quad 0x1368000000000000 // x^48 * (x^48 mod G(x)) - .quad 0x2d56000000000000 // x^48 * (x^80 mod G(x)) -// .Lbarrett_reduction_consts: - .quad 0x0000000000018bb7 // G(x) - .quad 0x00000001f65a57f8 // floor(x^48 / G(x)) - -// For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 - -// len] is the index vector to shift left by 'len' bytes, and is also {0x80, -// ..., 0x80} XOR the index vector to shift right by '16 - len' bytes. -.Lbyteshift_table: - .byte 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87 - .byte 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f - .byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 - .byte 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe , 0x0 diff --git a/arch/arm64/lib/crc-t10dif.c b/arch/arm64/lib/crc-t10dif.c deleted file mode 100644 index c2ffe4fdb59d..000000000000 --- a/arch/arm64/lib/crc-t10dif.c +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Accelerated CRC-T10DIF using arm64 NEON and Crypto Extensions instructions - * - * Copyright (C) 2016 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org> - */ - -#include <linux/cpufeature.h> -#include <linux/crc-t10dif.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <crypto/internal/simd.h> - -#include <asm/neon.h> -#include <asm/simd.h> - -static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_asimd); -static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_pmull); - -#define CRC_T10DIF_PMULL_CHUNK_SIZE 16U - -asmlinkage void crc_t10dif_pmull_p8(u16 init_crc, const u8 *buf, size_t len, - u8 out[16]); -asmlinkage u16 crc_t10dif_pmull_p64(u16 init_crc, const u8 *buf, size_t len); - -u16 crc_t10dif_arch(u16 crc, const u8 *data, size_t length) -{ - if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE) { - if (static_branch_likely(&have_pmull)) { - if (crypto_simd_usable()) { - kernel_neon_begin(); - crc = crc_t10dif_pmull_p64(crc, data, length); - kernel_neon_end(); - return crc; - } - } else if (length > CRC_T10DIF_PMULL_CHUNK_SIZE && - static_branch_likely(&have_asimd) && - crypto_simd_usable()) { - u8 buf[16]; - - kernel_neon_begin(); - crc_t10dif_pmull_p8(crc, data, length, buf); - kernel_neon_end(); - - return crc_t10dif_generic(0, buf, sizeof(buf)); - } - } - return crc_t10dif_generic(crc, data, length); -} -EXPORT_SYMBOL(crc_t10dif_arch); - -static int __init crc_t10dif_arm64_init(void) -{ - if (cpu_have_named_feature(ASIMD)) { - static_branch_enable(&have_asimd); - if (cpu_have_named_feature(PMULL)) - static_branch_enable(&have_pmull); - } - return 0; -} -subsys_initcall(crc_t10dif_arm64_init); - -static void __exit crc_t10dif_arm64_exit(void) -{ -} -module_exit(crc_t10dif_arm64_exit); - -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_DESCRIPTION("CRC-T10DIF using arm64 NEON and Crypto Extensions"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm64/lib/crc32-core.S b/arch/arm64/lib/crc32-core.S deleted file mode 100644 index 68825317460f..000000000000 --- a/arch/arm64/lib/crc32-core.S +++ /dev/null @@ -1,362 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Accelerated CRC32(C) using AArch64 CRC and PMULL instructions - * - * Copyright (C) 2016 - 2018 Linaro Ltd. - * Copyright (C) 2024 Google LLC - * - * Author: Ard Biesheuvel <ardb@kernel.org> - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - - .cpu generic+crc+crypto - - .macro bitle, reg - .endm - - .macro bitbe, reg - rbit \reg, \reg - .endm - - .macro bytele, reg - .endm - - .macro bytebe, reg - rbit \reg, \reg - lsr \reg, \reg, #24 - .endm - - .macro hwordle, reg -CPU_BE( rev16 \reg, \reg ) - .endm - - .macro hwordbe, reg -CPU_LE( rev \reg, \reg ) - rbit \reg, \reg -CPU_BE( lsr \reg, \reg, #16 ) - .endm - - .macro le, regs:vararg - .irp r, \regs -CPU_BE( rev \r, \r ) - .endr - .endm - - .macro be, regs:vararg - .irp r, \regs -CPU_LE( rev \r, \r ) - .endr - .irp r, \regs - rbit \r, \r - .endr - .endm - - .macro __crc32, c, order=le - bit\order w0 - cmp x2, #16 - b.lt 8f // less than 16 bytes - - and x7, x2, #0x1f - and x2, x2, #~0x1f - cbz x7, 32f // multiple of 32 bytes - - and x8, x7, #0xf - ldp x3, x4, [x1] - add x8, x8, x1 - add x1, x1, x7 - ldp x5, x6, [x8] - \order x3, x4, x5, x6 - - tst x7, #8 - crc32\c\()x w8, w0, x3 - csel x3, x3, x4, eq - csel w0, w0, w8, eq - tst x7, #4 - lsr x4, x3, #32 - crc32\c\()w w8, w0, w3 - csel x3, x3, x4, eq - csel w0, w0, w8, eq - tst x7, #2 - lsr w4, w3, #16 - crc32\c\()h w8, w0, w3 - csel w3, w3, w4, eq - csel w0, w0, w8, eq - tst x7, #1 - crc32\c\()b w8, w0, w3 - csel w0, w0, w8, eq - tst x7, #16 - crc32\c\()x w8, w0, x5 - crc32\c\()x w8, w8, x6 - csel w0, w0, w8, eq - cbz x2, 0f - -32: ldp x3, x4, [x1], #32 - sub x2, x2, #32 - ldp x5, x6, [x1, #-16] - \order x3, x4, x5, x6 - crc32\c\()x w0, w0, x3 - crc32\c\()x w0, w0, x4 - crc32\c\()x w0, w0, x5 - crc32\c\()x w0, w0, x6 - cbnz x2, 32b -0: bit\order w0 - ret - -8: tbz x2, #3, 4f - ldr x3, [x1], #8 - \order x3 - crc32\c\()x w0, w0, x3 -4: tbz x2, #2, 2f - ldr w3, [x1], #4 - \order w3 - crc32\c\()w w0, w0, w3 -2: tbz x2, #1, 1f - ldrh w3, [x1], #2 - hword\order w3 - crc32\c\()h w0, w0, w3 -1: tbz x2, #0, 0f - ldrb w3, [x1] - byte\order w3 - crc32\c\()b w0, w0, w3 -0: bit\order w0 - ret - .endm - - .align 5 -SYM_FUNC_START(crc32_le_arm64) - __crc32 -SYM_FUNC_END(crc32_le_arm64) - - .align 5 -SYM_FUNC_START(crc32c_le_arm64) - __crc32 c -SYM_FUNC_END(crc32c_le_arm64) - - .align 5 -SYM_FUNC_START(crc32_be_arm64) - __crc32 order=be -SYM_FUNC_END(crc32_be_arm64) - - in .req x1 - len .req x2 - - /* - * w0: input CRC at entry, output CRC at exit - * x1: pointer to input buffer - * x2: length of input in bytes - */ - .macro crc4way, insn, table, order=le - bit\order w0 - lsr len, len, #6 // len := # of 64-byte blocks - - /* Process up to 64 blocks of 64 bytes at a time */ -.La\@: mov x3, #64 - cmp len, #64 - csel x3, x3, len, hi // x3 := min(len, 64) - sub len, len, x3 - - /* Divide the input into 4 contiguous blocks */ - add x4, x3, x3, lsl #1 // x4 := 3 * x3 - add x7, in, x3, lsl #4 // x7 := in + 16 * x3 - add x8, in, x3, lsl #5 // x8 := in + 32 * x3 - add x9, in, x4, lsl #4 // x9 := in + 16 * x4 - - /* Load the folding coefficients from the lookup table */ - adr_l x5, \table - 12 // entry 0 omitted - add x5, x5, x4, lsl #2 // x5 += 12 * x3 - ldp s0, s1, [x5] - ldr s2, [x5, #8] - - /* Zero init partial CRCs for this iteration */ - mov w4, wzr - mov w5, wzr - mov w6, wzr - mov x17, xzr - -.Lb\@: sub x3, x3, #1 - \insn w6, w6, x17 - ldp x10, x11, [in], #16 - ldp x12, x13, [x7], #16 - ldp x14, x15, [x8], #16 - ldp x16, x17, [x9], #16 - - \order x10, x11, x12, x13, x14, x15, x16, x17 - - /* Apply the CRC transform to 4 16-byte blocks in parallel */ - \insn w0, w0, x10 - \insn w4, w4, x12 - \insn w5, w5, x14 - \insn w6, w6, x16 - \insn w0, w0, x11 - \insn w4, w4, x13 - \insn w5, w5, x15 - cbnz x3, .Lb\@ - - /* Combine the 4 partial results into w0 */ - mov v3.d[0], x0 - mov v4.d[0], x4 - mov v5.d[0], x5 - pmull v0.1q, v0.1d, v3.1d - pmull v1.1q, v1.1d, v4.1d - pmull v2.1q, v2.1d, v5.1d - eor v0.8b, v0.8b, v1.8b - eor v0.8b, v0.8b, v2.8b - mov x5, v0.d[0] - eor x5, x5, x17 - \insn w0, w6, x5 - - mov in, x9 - cbnz len, .La\@ - - bit\order w0 - ret - .endm - - .align 5 -SYM_FUNC_START(crc32c_le_arm64_4way) - crc4way crc32cx, .L0 -SYM_FUNC_END(crc32c_le_arm64_4way) - - .align 5 -SYM_FUNC_START(crc32_le_arm64_4way) - crc4way crc32x, .L1 -SYM_FUNC_END(crc32_le_arm64_4way) - - .align 5 -SYM_FUNC_START(crc32_be_arm64_4way) - crc4way crc32x, .L1, be -SYM_FUNC_END(crc32_be_arm64_4way) - - .section .rodata, "a", %progbits - .align 6 -.L0: .long 0xddc0152b, 0xba4fc28e, 0x493c7d27 - .long 0x0715ce53, 0x9e4addf8, 0xba4fc28e - .long 0xc96cfdc0, 0x0715ce53, 0xddc0152b - .long 0xab7aff2a, 0x0d3b6092, 0x9e4addf8 - .long 0x299847d5, 0x878a92a7, 0x39d3b296 - .long 0xb6dd949b, 0xab7aff2a, 0x0715ce53 - .long 0xa60ce07b, 0x83348832, 0x47db8317 - .long 0xd270f1a2, 0xb9e02b86, 0x0d3b6092 - .long 0x65863b64, 0xb6dd949b, 0xc96cfdc0 - .long 0xb3e32c28, 0xbac2fd7b, 0x878a92a7 - .long 0xf285651c, 0xce7f39f4, 0xdaece73e - .long 0x271d9844, 0xd270f1a2, 0xab7aff2a - .long 0x6cb08e5c, 0x2b3cac5d, 0x2162d385 - .long 0xcec3662e, 0x1b03397f, 0x83348832 - .long 0x8227bb8a, 0xb3e32c28, 0x299847d5 - .long 0xd7a4825c, 0xdd7e3b0c, 0xb9e02b86 - .long 0xf6076544, 0x10746f3c, 0x18b33a4e - .long 0x98d8d9cb, 0x271d9844, 0xb6dd949b - .long 0x57a3d037, 0x93a5f730, 0x78d9ccb7 - .long 0x3771e98f, 0x6b749fb2, 0xbac2fd7b - .long 0xe0ac139e, 0xcec3662e, 0xa60ce07b - .long 0x6f345e45, 0xe6fc4e6a, 0xce7f39f4 - .long 0xa2b73df1, 0xb0cd4768, 0x61d82e56 - .long 0x86d8e4d2, 0xd7a4825c, 0xd270f1a2 - .long 0xa90fd27a, 0x0167d312, 0xc619809d - .long 0xca6ef3ac, 0x26f6a60a, 0x2b3cac5d - .long 0x4597456a, 0x98d8d9cb, 0x65863b64 - .long 0xc9c8b782, 0x68bce87a, 0x1b03397f - .long 0x62ec6c6d, 0x6956fc3b, 0xebb883bd - .long 0x2342001e, 0x3771e98f, 0xb3e32c28 - .long 0xe8b6368b, 0x2178513a, 0x064f7f26 - .long 0x9ef68d35, 0x170076fa, 0xdd7e3b0c - .long 0x0b0bf8ca, 0x6f345e45, 0xf285651c - .long 0x02ee03b2, 0xff0dba97, 0x10746f3c - .long 0x135c83fd, 0xf872e54c, 0xc7a68855 - .long 0x00bcf5f6, 0x86d8e4d2, 0x271d9844 - .long 0x58ca5f00, 0x5bb8f1bc, 0x8e766a0c - .long 0xded288f8, 0xb3af077a, 0x93a5f730 - .long 0x37170390, 0xca6ef3ac, 0x6cb08e5c - .long 0xf48642e9, 0xdd66cbbb, 0x6b749fb2 - .long 0xb25b29f2, 0xe9e28eb4, 0x1393e203 - .long 0x45cddf4e, 0xc9c8b782, 0xcec3662e - .long 0xdfd94fb2, 0x93e106a4, 0x96c515bb - .long 0x021ac5ef, 0xd813b325, 0xe6fc4e6a - .long 0x8e1450f7, 0x2342001e, 0x8227bb8a - .long 0xe0cdcf86, 0x6d9a4957, 0xb0cd4768 - .long 0x613eee91, 0xd2c3ed1a, 0x39c7ff35 - .long 0xbedc6ba1, 0x9ef68d35, 0xd7a4825c - .long 0x0cd1526a, 0xf2271e60, 0x0ab3844b - .long 0xd6c3a807, 0x2664fd8b, 0x0167d312 - .long 0x1d31175f, 0x02ee03b2, 0xf6076544 - .long 0x4be7fd90, 0x363bd6b3, 0x26f6a60a - .long 0x6eeed1c9, 0x5fabe670, 0xa741c1bf - .long 0xb3a6da94, 0x00bcf5f6, 0x98d8d9cb - .long 0x2e7d11a7, 0x17f27698, 0x49c3cc9c - .long 0x889774e1, 0xaa7c7ad5, 0x68bce87a - .long 0x8a074012, 0xded288f8, 0x57a3d037 - .long 0xbd0bb25f, 0x6d390dec, 0x6956fc3b - .long 0x3be3c09b, 0x6353c1cc, 0x42d98888 - .long 0x465a4eee, 0xf48642e9, 0x3771e98f - .long 0x2e5f3c8c, 0xdd35bc8d, 0xb42ae3d9 - .long 0xa52f58ec, 0x9a5ede41, 0x2178513a - .long 0x47972100, 0x45cddf4e, 0xe0ac139e - .long 0x359674f7, 0xa51b6135, 0x170076fa - -.L1: .long 0xaf449247, 0x81256527, 0xccaa009e - .long 0x57c54819, 0x1d9513d7, 0x81256527 - .long 0x3f41287a, 0x57c54819, 0xaf449247 - .long 0xf5e48c85, 0x910eeec1, 0x1d9513d7 - .long 0x1f0c2cdd, 0x9026d5b1, 0xae0b5394 - .long 0x71d54a59, 0xf5e48c85, 0x57c54819 - .long 0x1c63267b, 0xfe807bbd, 0x0cbec0ed - .long 0xd31343ea, 0xe95c1271, 0x910eeec1 - .long 0xf9d9c7ee, 0x71d54a59, 0x3f41287a - .long 0x9ee62949, 0xcec97417, 0x9026d5b1 - .long 0xa55d1514, 0xf183c71b, 0xd1df2327 - .long 0x21aa2b26, 0xd31343ea, 0xf5e48c85 - .long 0x9d842b80, 0xeea395c4, 0x3c656ced - .long 0xd8110ff1, 0xcd669a40, 0xfe807bbd - .long 0x3f9e9356, 0x9ee62949, 0x1f0c2cdd - .long 0x1d6708a0, 0x0c30f51d, 0xe95c1271 - .long 0xef82aa68, 0xdb3935ea, 0xb918a347 - .long 0xd14bcc9b, 0x21aa2b26, 0x71d54a59 - .long 0x99cce860, 0x356d209f, 0xff6f2fc2 - .long 0xd8af8e46, 0xc352f6de, 0xcec97417 - .long 0xf1996890, 0xd8110ff1, 0x1c63267b - .long 0x631bc508, 0xe95c7216, 0xf183c71b - .long 0x8511c306, 0x8e031a19, 0x9b9bdbd0 - .long 0xdb3839f3, 0x1d6708a0, 0xd31343ea - .long 0x7a92fffb, 0xf7003835, 0x4470ac44 - .long 0x6ce68f2a, 0x00eba0c8, 0xeea395c4 - .long 0x4caaa263, 0xd14bcc9b, 0xf9d9c7ee - .long 0xb46f7cff, 0x9a1b53c8, 0xcd669a40 - .long 0x60290934, 0x81b6f443, 0x6d40f445 - .long 0x8e976a7d, 0xd8af8e46, 0x9ee62949 - .long 0xdcf5088a, 0x9dbdc100, 0x145575d5 - .long 0x1753ab84, 0xbbf2f6d6, 0x0c30f51d - .long 0x255b139e, 0x631bc508, 0xa55d1514 - .long 0xd784eaa8, 0xce26786c, 0xdb3935ea - .long 0x6d2c864a, 0x8068c345, 0x2586d334 - .long 0x02072e24, 0xdb3839f3, 0x21aa2b26 - .long 0x06689b0a, 0x5efd72f5, 0xe0575528 - .long 0x1e52f5ea, 0x4117915b, 0x356d209f - .long 0x1d3d1db6, 0x6ce68f2a, 0x9d842b80 - .long 0x3796455c, 0xb8e0e4a8, 0xc352f6de - .long 0xdf3a4eb3, 0xc55a2330, 0xb84ffa9c - .long 0x28ae0976, 0xb46f7cff, 0xd8110ff1 - .long 0x9764bc8d, 0xd7e7a22c, 0x712510f0 - .long 0x13a13e18, 0x3e9a43cd, 0xe95c7216 - .long 0xb8ee242e, 0x8e976a7d, 0x3f9e9356 - .long 0x0c540e7b, 0x753c81ff, 0x8e031a19 - .long 0x9924c781, 0xb9220208, 0x3edcde65 - .long 0x3954de39, 0x1753ab84, 0x1d6708a0 - .long 0xf32238b5, 0xbec81497, 0x9e70b943 - .long 0xbbd2cd2c, 0x0925d861, 0xf7003835 - .long 0xcc401304, 0xd784eaa8, 0xef82aa68 - .long 0x4987e684, 0x6044fbb0, 0x00eba0c8 - .long 0x3aa11427, 0x18fe3b4a, 0x87441142 - .long 0x297aad60, 0x02072e24, 0xd14bcc9b - .long 0xf60c5e51, 0x6ef6f487, 0x5b7fdd0a - .long 0x632d78c5, 0x3fc33de4, 0x9a1b53c8 - .long 0x25b8822a, 0x1e52f5ea, 0x99cce860 - .long 0xd4fc84bc, 0x1af62fb8, 0x81b6f443 - .long 0x5690aa32, 0xa91fdefb, 0x688a110e - .long 0x1357a093, 0x3796455c, 0xd8af8e46 - .long 0x798fdd33, 0xaaa18a37, 0x357b9517 - .long 0xc2815395, 0x54d42691, 0x9dbdc100 - .long 0x21cfc0f7, 0x28ae0976, 0xf1996890 - .long 0xa0decef3, 0x7b4aa8b7, 0xbbf2f6d6 diff --git a/arch/arm64/lib/crc32.c b/arch/arm64/lib/crc32.c deleted file mode 100644 index ed3acd71178f..000000000000 --- a/arch/arm64/lib/crc32.c +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include <linux/crc32.h> -#include <linux/linkage.h> -#include <linux/module.h> - -#include <asm/alternative.h> -#include <asm/cpufeature.h> -#include <asm/neon.h> -#include <asm/simd.h> - -#include <crypto/internal/simd.h> - -// The minimum input length to consider the 4-way interleaved code path -static const size_t min_len = 1024; - -asmlinkage u32 crc32_le_arm64(u32 crc, unsigned char const *p, size_t len); -asmlinkage u32 crc32c_le_arm64(u32 crc, unsigned char const *p, size_t len); -asmlinkage u32 crc32_be_arm64(u32 crc, unsigned char const *p, size_t len); - -asmlinkage u32 crc32_le_arm64_4way(u32 crc, unsigned char const *p, size_t len); -asmlinkage u32 crc32c_le_arm64_4way(u32 crc, unsigned char const *p, size_t len); -asmlinkage u32 crc32_be_arm64_4way(u32 crc, unsigned char const *p, size_t len); - -u32 crc32_le_arch(u32 crc, const u8 *p, size_t len) -{ - if (!alternative_has_cap_likely(ARM64_HAS_CRC32)) - return crc32_le_base(crc, p, len); - - if (len >= min_len && cpu_have_named_feature(PMULL) && crypto_simd_usable()) { - kernel_neon_begin(); - crc = crc32_le_arm64_4way(crc, p, len); - kernel_neon_end(); - - p += round_down(len, 64); - len %= 64; - - if (!len) - return crc; - } - - return crc32_le_arm64(crc, p, len); -} -EXPORT_SYMBOL(crc32_le_arch); - -u32 crc32c_arch(u32 crc, const u8 *p, size_t len) -{ - if (!alternative_has_cap_likely(ARM64_HAS_CRC32)) - return crc32c_base(crc, p, len); - - if (len >= min_len && cpu_have_named_feature(PMULL) && crypto_simd_usable()) { - kernel_neon_begin(); - crc = crc32c_le_arm64_4way(crc, p, len); - kernel_neon_end(); - - p += round_down(len, 64); - len %= 64; - - if (!len) - return crc; - } - - return crc32c_le_arm64(crc, p, len); -} -EXPORT_SYMBOL(crc32c_arch); - -u32 crc32_be_arch(u32 crc, const u8 *p, size_t len) -{ - if (!alternative_has_cap_likely(ARM64_HAS_CRC32)) - return crc32_be_base(crc, p, len); - - if (len >= min_len && cpu_have_named_feature(PMULL) && crypto_simd_usable()) { - kernel_neon_begin(); - crc = crc32_be_arm64_4way(crc, p, len); - kernel_neon_end(); - - p += round_down(len, 64); - len %= 64; - - if (!len) - return crc; - } - - return crc32_be_arm64(crc, p, len); -} -EXPORT_SYMBOL(crc32_be_arch); - -u32 crc32_optimizations(void) -{ - if (alternative_has_cap_likely(ARM64_HAS_CRC32)) - return CRC32_LE_OPTIMIZATION | - CRC32_BE_OPTIMIZATION | - CRC32C_OPTIMIZATION; - return 0; -} -EXPORT_SYMBOL(crc32_optimizations); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("arm64-optimized CRC32 functions"); diff --git a/arch/arm64/lib/crypto/.gitignore b/arch/arm64/lib/crypto/.gitignore deleted file mode 100644 index 12d74d8b03d0..000000000000 --- a/arch/arm64/lib/crypto/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -poly1305-core.S -sha256-core.S diff --git a/arch/arm64/lib/crypto/Kconfig b/arch/arm64/lib/crypto/Kconfig deleted file mode 100644 index 129a7685cb4c..000000000000 --- a/arch/arm64/lib/crypto/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -config CRYPTO_CHACHA20_NEON - tristate - depends on KERNEL_MODE_NEON - default CRYPTO_LIB_CHACHA - select CRYPTO_LIB_CHACHA_GENERIC - select CRYPTO_ARCH_HAVE_LIB_CHACHA - -config CRYPTO_POLY1305_NEON - tristate - depends on KERNEL_MODE_NEON - default CRYPTO_LIB_POLY1305 - select CRYPTO_ARCH_HAVE_LIB_POLY1305 - -config CRYPTO_SHA256_ARM64 - tristate - default CRYPTO_LIB_SHA256 - select CRYPTO_ARCH_HAVE_LIB_SHA256 - select CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD diff --git a/arch/arm64/lib/crypto/Makefile b/arch/arm64/lib/crypto/Makefile deleted file mode 100644 index 946c09903711..000000000000 --- a/arch/arm64/lib/crypto/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o -chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o - -obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o -poly1305-neon-y := poly1305-core.o poly1305-glue.o -AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_block_init_arch -AFLAGS_poly1305-core.o += -Dpoly1305_emit=poly1305_emit_arch - -obj-$(CONFIG_CRYPTO_SHA256_ARM64) += sha256-arm64.o -sha256-arm64-y := sha256.o sha256-core.o -sha256-arm64-$(CONFIG_KERNEL_MODE_NEON) += sha256-ce.o - -quiet_cmd_perlasm = PERLASM $@ - cmd_perlasm = $(PERL) $(<) void $(@) - -$(obj)/%-core.S: $(src)/%-armv8.pl - $(call cmd,perlasm) - -$(obj)/sha256-core.S: $(src)/sha2-armv8.pl - $(call cmd,perlasm) - -clean-files += poly1305-core.S sha256-core.S diff --git a/arch/arm64/lib/crypto/chacha-neon-core.S b/arch/arm64/lib/crypto/chacha-neon-core.S deleted file mode 100644 index 80079586ecc7..000000000000 --- a/arch/arm64/lib/crypto/chacha-neon-core.S +++ /dev/null @@ -1,805 +0,0 @@ -/* - * ChaCha/HChaCha NEON helper functions - * - * Copyright (C) 2016-2018 Linaro, Ltd. <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Originally based on: - * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSSE3 functions - * - * Copyright (C) 2015 Martin Willi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/cache.h> - - .text - .align 6 - -/* - * chacha_permute - permute one block - * - * Permute one 64-byte block where the state matrix is stored in the four NEON - * registers v0-v3. It performs matrix operations on four words in parallel, - * but requires shuffling to rearrange the words after each round. - * - * The round count is given in w3. - * - * Clobbers: w3, x10, v4, v12 - */ -SYM_FUNC_START_LOCAL(chacha_permute) - - adr_l x10, ROT8 - ld1 {v12.4s}, [x10] - -.Ldoubleround: - // x0 += x1, x3 = rotl32(x3 ^ x0, 16) - add v0.4s, v0.4s, v1.4s - eor v3.16b, v3.16b, v0.16b - rev32 v3.8h, v3.8h - - // x2 += x3, x1 = rotl32(x1 ^ x2, 12) - add v2.4s, v2.4s, v3.4s - eor v4.16b, v1.16b, v2.16b - shl v1.4s, v4.4s, #12 - sri v1.4s, v4.4s, #20 - - // x0 += x1, x3 = rotl32(x3 ^ x0, 8) - add v0.4s, v0.4s, v1.4s - eor v3.16b, v3.16b, v0.16b - tbl v3.16b, {v3.16b}, v12.16b - - // x2 += x3, x1 = rotl32(x1 ^ x2, 7) - add v2.4s, v2.4s, v3.4s - eor v4.16b, v1.16b, v2.16b - shl v1.4s, v4.4s, #7 - sri v1.4s, v4.4s, #25 - - // x1 = shuffle32(x1, MASK(0, 3, 2, 1)) - ext v1.16b, v1.16b, v1.16b, #4 - // x2 = shuffle32(x2, MASK(1, 0, 3, 2)) - ext v2.16b, v2.16b, v2.16b, #8 - // x3 = shuffle32(x3, MASK(2, 1, 0, 3)) - ext v3.16b, v3.16b, v3.16b, #12 - - // x0 += x1, x3 = rotl32(x3 ^ x0, 16) - add v0.4s, v0.4s, v1.4s - eor v3.16b, v3.16b, v0.16b - rev32 v3.8h, v3.8h - - // x2 += x3, x1 = rotl32(x1 ^ x2, 12) - add v2.4s, v2.4s, v3.4s - eor v4.16b, v1.16b, v2.16b - shl v1.4s, v4.4s, #12 - sri v1.4s, v4.4s, #20 - - // x0 += x1, x3 = rotl32(x3 ^ x0, 8) - add v0.4s, v0.4s, v1.4s - eor v3.16b, v3.16b, v0.16b - tbl v3.16b, {v3.16b}, v12.16b - - // x2 += x3, x1 = rotl32(x1 ^ x2, 7) - add v2.4s, v2.4s, v3.4s - eor v4.16b, v1.16b, v2.16b - shl v1.4s, v4.4s, #7 - sri v1.4s, v4.4s, #25 - - // x1 = shuffle32(x1, MASK(2, 1, 0, 3)) - ext v1.16b, v1.16b, v1.16b, #12 - // x2 = shuffle32(x2, MASK(1, 0, 3, 2)) - ext v2.16b, v2.16b, v2.16b, #8 - // x3 = shuffle32(x3, MASK(0, 3, 2, 1)) - ext v3.16b, v3.16b, v3.16b, #4 - - subs w3, w3, #2 - b.ne .Ldoubleround - - ret -SYM_FUNC_END(chacha_permute) - -SYM_FUNC_START(chacha_block_xor_neon) - // x0: Input state matrix, s - // x1: 1 data block output, o - // x2: 1 data block input, i - // w3: nrounds - - stp x29, x30, [sp, #-16]! - mov x29, sp - - // x0..3 = s0..3 - ld1 {v0.4s-v3.4s}, [x0] - ld1 {v8.4s-v11.4s}, [x0] - - bl chacha_permute - - ld1 {v4.16b-v7.16b}, [x2] - - // o0 = i0 ^ (x0 + s0) - add v0.4s, v0.4s, v8.4s - eor v0.16b, v0.16b, v4.16b - - // o1 = i1 ^ (x1 + s1) - add v1.4s, v1.4s, v9.4s - eor v1.16b, v1.16b, v5.16b - - // o2 = i2 ^ (x2 + s2) - add v2.4s, v2.4s, v10.4s - eor v2.16b, v2.16b, v6.16b - - // o3 = i3 ^ (x3 + s3) - add v3.4s, v3.4s, v11.4s - eor v3.16b, v3.16b, v7.16b - - st1 {v0.16b-v3.16b}, [x1] - - ldp x29, x30, [sp], #16 - ret -SYM_FUNC_END(chacha_block_xor_neon) - -SYM_FUNC_START(hchacha_block_neon) - // x0: Input state matrix, s - // x1: output (8 32-bit words) - // w2: nrounds - - stp x29, x30, [sp, #-16]! - mov x29, sp - - ld1 {v0.4s-v3.4s}, [x0] - - mov w3, w2 - bl chacha_permute - - st1 {v0.4s}, [x1], #16 - st1 {v3.4s}, [x1] - - ldp x29, x30, [sp], #16 - ret -SYM_FUNC_END(hchacha_block_neon) - - a0 .req w12 - a1 .req w13 - a2 .req w14 - a3 .req w15 - a4 .req w16 - a5 .req w17 - a6 .req w19 - a7 .req w20 - a8 .req w21 - a9 .req w22 - a10 .req w23 - a11 .req w24 - a12 .req w25 - a13 .req w26 - a14 .req w27 - a15 .req w28 - - .align 6 -SYM_FUNC_START(chacha_4block_xor_neon) - frame_push 10 - - // x0: Input state matrix, s - // x1: 4 data blocks output, o - // x2: 4 data blocks input, i - // w3: nrounds - // x4: byte count - - adr_l x10, .Lpermute - and x5, x4, #63 - add x10, x10, x5 - - // - // This function encrypts four consecutive ChaCha blocks by loading - // the state matrix in NEON registers four times. The algorithm performs - // each operation on the corresponding word of each state matrix, hence - // requires no word shuffling. For final XORing step we transpose the - // matrix by interleaving 32- and then 64-bit words, which allows us to - // do XOR in NEON registers. - // - // At the same time, a fifth block is encrypted in parallel using - // scalar registers - // - adr_l x9, CTRINC // ... and ROT8 - ld1 {v30.4s-v31.4s}, [x9] - - // x0..15[0-3] = s0..3[0..3] - add x8, x0, #16 - ld4r { v0.4s- v3.4s}, [x0] - ld4r { v4.4s- v7.4s}, [x8], #16 - ld4r { v8.4s-v11.4s}, [x8], #16 - ld4r {v12.4s-v15.4s}, [x8] - - mov a0, v0.s[0] - mov a1, v1.s[0] - mov a2, v2.s[0] - mov a3, v3.s[0] - mov a4, v4.s[0] - mov a5, v5.s[0] - mov a6, v6.s[0] - mov a7, v7.s[0] - mov a8, v8.s[0] - mov a9, v9.s[0] - mov a10, v10.s[0] - mov a11, v11.s[0] - mov a12, v12.s[0] - mov a13, v13.s[0] - mov a14, v14.s[0] - mov a15, v15.s[0] - - // x12 += counter values 1-4 - add v12.4s, v12.4s, v30.4s - -.Ldoubleround4: - // x0 += x4, x12 = rotl32(x12 ^ x0, 16) - // x1 += x5, x13 = rotl32(x13 ^ x1, 16) - // x2 += x6, x14 = rotl32(x14 ^ x2, 16) - // x3 += x7, x15 = rotl32(x15 ^ x3, 16) - add v0.4s, v0.4s, v4.4s - add a0, a0, a4 - add v1.4s, v1.4s, v5.4s - add a1, a1, a5 - add v2.4s, v2.4s, v6.4s - add a2, a2, a6 - add v3.4s, v3.4s, v7.4s - add a3, a3, a7 - - eor v12.16b, v12.16b, v0.16b - eor a12, a12, a0 - eor v13.16b, v13.16b, v1.16b - eor a13, a13, a1 - eor v14.16b, v14.16b, v2.16b - eor a14, a14, a2 - eor v15.16b, v15.16b, v3.16b - eor a15, a15, a3 - - rev32 v12.8h, v12.8h - ror a12, a12, #16 - rev32 v13.8h, v13.8h - ror a13, a13, #16 - rev32 v14.8h, v14.8h - ror a14, a14, #16 - rev32 v15.8h, v15.8h - ror a15, a15, #16 - - // x8 += x12, x4 = rotl32(x4 ^ x8, 12) - // x9 += x13, x5 = rotl32(x5 ^ x9, 12) - // x10 += x14, x6 = rotl32(x6 ^ x10, 12) - // x11 += x15, x7 = rotl32(x7 ^ x11, 12) - add v8.4s, v8.4s, v12.4s - add a8, a8, a12 - add v9.4s, v9.4s, v13.4s - add a9, a9, a13 - add v10.4s, v10.4s, v14.4s - add a10, a10, a14 - add v11.4s, v11.4s, v15.4s - add a11, a11, a15 - - eor v16.16b, v4.16b, v8.16b - eor a4, a4, a8 - eor v17.16b, v5.16b, v9.16b - eor a5, a5, a9 - eor v18.16b, v6.16b, v10.16b - eor a6, a6, a10 - eor v19.16b, v7.16b, v11.16b - eor a7, a7, a11 - - shl v4.4s, v16.4s, #12 - shl v5.4s, v17.4s, #12 - shl v6.4s, v18.4s, #12 - shl v7.4s, v19.4s, #12 - - sri v4.4s, v16.4s, #20 - ror a4, a4, #20 - sri v5.4s, v17.4s, #20 - ror a5, a5, #20 - sri v6.4s, v18.4s, #20 - ror a6, a6, #20 - sri v7.4s, v19.4s, #20 - ror a7, a7, #20 - - // x0 += x4, x12 = rotl32(x12 ^ x0, 8) - // x1 += x5, x13 = rotl32(x13 ^ x1, 8) - // x2 += x6, x14 = rotl32(x14 ^ x2, 8) - // x3 += x7, x15 = rotl32(x15 ^ x3, 8) - add v0.4s, v0.4s, v4.4s - add a0, a0, a4 - add v1.4s, v1.4s, v5.4s - add a1, a1, a5 - add v2.4s, v2.4s, v6.4s - add a2, a2, a6 - add v3.4s, v3.4s, v7.4s - add a3, a3, a7 - - eor v12.16b, v12.16b, v0.16b - eor a12, a12, a0 - eor v13.16b, v13.16b, v1.16b - eor a13, a13, a1 - eor v14.16b, v14.16b, v2.16b - eor a14, a14, a2 - eor v15.16b, v15.16b, v3.16b - eor a15, a15, a3 - - tbl v12.16b, {v12.16b}, v31.16b - ror a12, a12, #24 - tbl v13.16b, {v13.16b}, v31.16b - ror a13, a13, #24 - tbl v14.16b, {v14.16b}, v31.16b - ror a14, a14, #24 - tbl v15.16b, {v15.16b}, v31.16b - ror a15, a15, #24 - - // x8 += x12, x4 = rotl32(x4 ^ x8, 7) - // x9 += x13, x5 = rotl32(x5 ^ x9, 7) - // x10 += x14, x6 = rotl32(x6 ^ x10, 7) - // x11 += x15, x7 = rotl32(x7 ^ x11, 7) - add v8.4s, v8.4s, v12.4s - add a8, a8, a12 - add v9.4s, v9.4s, v13.4s - add a9, a9, a13 - add v10.4s, v10.4s, v14.4s - add a10, a10, a14 - add v11.4s, v11.4s, v15.4s - add a11, a11, a15 - - eor v16.16b, v4.16b, v8.16b - eor a4, a4, a8 - eor v17.16b, v5.16b, v9.16b - eor a5, a5, a9 - eor v18.16b, v6.16b, v10.16b - eor a6, a6, a10 - eor v19.16b, v7.16b, v11.16b - eor a7, a7, a11 - - shl v4.4s, v16.4s, #7 - shl v5.4s, v17.4s, #7 - shl v6.4s, v18.4s, #7 - shl v7.4s, v19.4s, #7 - - sri v4.4s, v16.4s, #25 - ror a4, a4, #25 - sri v5.4s, v17.4s, #25 - ror a5, a5, #25 - sri v6.4s, v18.4s, #25 - ror a6, a6, #25 - sri v7.4s, v19.4s, #25 - ror a7, a7, #25 - - // x0 += x5, x15 = rotl32(x15 ^ x0, 16) - // x1 += x6, x12 = rotl32(x12 ^ x1, 16) - // x2 += x7, x13 = rotl32(x13 ^ x2, 16) - // x3 += x4, x14 = rotl32(x14 ^ x3, 16) - add v0.4s, v0.4s, v5.4s - add a0, a0, a5 - add v1.4s, v1.4s, v6.4s - add a1, a1, a6 - add v2.4s, v2.4s, v7.4s - add a2, a2, a7 - add v3.4s, v3.4s, v4.4s - add a3, a3, a4 - - eor v15.16b, v15.16b, v0.16b - eor a15, a15, a0 - eor v12.16b, v12.16b, v1.16b - eor a12, a12, a1 - eor v13.16b, v13.16b, v2.16b - eor a13, a13, a2 - eor v14.16b, v14.16b, v3.16b - eor a14, a14, a3 - - rev32 v15.8h, v15.8h - ror a15, a15, #16 - rev32 v12.8h, v12.8h - ror a12, a12, #16 - rev32 v13.8h, v13.8h - ror a13, a13, #16 - rev32 v14.8h, v14.8h - ror a14, a14, #16 - - // x10 += x15, x5 = rotl32(x5 ^ x10, 12) - // x11 += x12, x6 = rotl32(x6 ^ x11, 12) - // x8 += x13, x7 = rotl32(x7 ^ x8, 12) - // x9 += x14, x4 = rotl32(x4 ^ x9, 12) - add v10.4s, v10.4s, v15.4s - add a10, a10, a15 - add v11.4s, v11.4s, v12.4s - add a11, a11, a12 - add v8.4s, v8.4s, v13.4s - add a8, a8, a13 - add v9.4s, v9.4s, v14.4s - add a9, a9, a14 - - eor v16.16b, v5.16b, v10.16b - eor a5, a5, a10 - eor v17.16b, v6.16b, v11.16b - eor a6, a6, a11 - eor v18.16b, v7.16b, v8.16b - eor a7, a7, a8 - eor v19.16b, v4.16b, v9.16b - eor a4, a4, a9 - - shl v5.4s, v16.4s, #12 - shl v6.4s, v17.4s, #12 - shl v7.4s, v18.4s, #12 - shl v4.4s, v19.4s, #12 - - sri v5.4s, v16.4s, #20 - ror a5, a5, #20 - sri v6.4s, v17.4s, #20 - ror a6, a6, #20 - sri v7.4s, v18.4s, #20 - ror a7, a7, #20 - sri v4.4s, v19.4s, #20 - ror a4, a4, #20 - - // x0 += x5, x15 = rotl32(x15 ^ x0, 8) - // x1 += x6, x12 = rotl32(x12 ^ x1, 8) - // x2 += x7, x13 = rotl32(x13 ^ x2, 8) - // x3 += x4, x14 = rotl32(x14 ^ x3, 8) - add v0.4s, v0.4s, v5.4s - add a0, a0, a5 - add v1.4s, v1.4s, v6.4s - add a1, a1, a6 - add v2.4s, v2.4s, v7.4s - add a2, a2, a7 - add v3.4s, v3.4s, v4.4s - add a3, a3, a4 - - eor v15.16b, v15.16b, v0.16b - eor a15, a15, a0 - eor v12.16b, v12.16b, v1.16b - eor a12, a12, a1 - eor v13.16b, v13.16b, v2.16b - eor a13, a13, a2 - eor v14.16b, v14.16b, v3.16b - eor a14, a14, a3 - - tbl v15.16b, {v15.16b}, v31.16b - ror a15, a15, #24 - tbl v12.16b, {v12.16b}, v31.16b - ror a12, a12, #24 - tbl v13.16b, {v13.16b}, v31.16b - ror a13, a13, #24 - tbl v14.16b, {v14.16b}, v31.16b - ror a14, a14, #24 - - // x10 += x15, x5 = rotl32(x5 ^ x10, 7) - // x11 += x12, x6 = rotl32(x6 ^ x11, 7) - // x8 += x13, x7 = rotl32(x7 ^ x8, 7) - // x9 += x14, x4 = rotl32(x4 ^ x9, 7) - add v10.4s, v10.4s, v15.4s - add a10, a10, a15 - add v11.4s, v11.4s, v12.4s - add a11, a11, a12 - add v8.4s, v8.4s, v13.4s - add a8, a8, a13 - add v9.4s, v9.4s, v14.4s - add a9, a9, a14 - - eor v16.16b, v5.16b, v10.16b - eor a5, a5, a10 - eor v17.16b, v6.16b, v11.16b - eor a6, a6, a11 - eor v18.16b, v7.16b, v8.16b - eor a7, a7, a8 - eor v19.16b, v4.16b, v9.16b - eor a4, a4, a9 - - shl v5.4s, v16.4s, #7 - shl v6.4s, v17.4s, #7 - shl v7.4s, v18.4s, #7 - shl v4.4s, v19.4s, #7 - - sri v5.4s, v16.4s, #25 - ror a5, a5, #25 - sri v6.4s, v17.4s, #25 - ror a6, a6, #25 - sri v7.4s, v18.4s, #25 - ror a7, a7, #25 - sri v4.4s, v19.4s, #25 - ror a4, a4, #25 - - subs w3, w3, #2 - b.ne .Ldoubleround4 - - ld4r {v16.4s-v19.4s}, [x0], #16 - ld4r {v20.4s-v23.4s}, [x0], #16 - - // x12 += counter values 0-3 - add v12.4s, v12.4s, v30.4s - - // x0[0-3] += s0[0] - // x1[0-3] += s0[1] - // x2[0-3] += s0[2] - // x3[0-3] += s0[3] - add v0.4s, v0.4s, v16.4s - mov w6, v16.s[0] - mov w7, v17.s[0] - add v1.4s, v1.4s, v17.4s - mov w8, v18.s[0] - mov w9, v19.s[0] - add v2.4s, v2.4s, v18.4s - add a0, a0, w6 - add a1, a1, w7 - add v3.4s, v3.4s, v19.4s - add a2, a2, w8 - add a3, a3, w9 -CPU_BE( rev a0, a0 ) -CPU_BE( rev a1, a1 ) -CPU_BE( rev a2, a2 ) -CPU_BE( rev a3, a3 ) - - ld4r {v24.4s-v27.4s}, [x0], #16 - ld4r {v28.4s-v31.4s}, [x0] - - // x4[0-3] += s1[0] - // x5[0-3] += s1[1] - // x6[0-3] += s1[2] - // x7[0-3] += s1[3] - add v4.4s, v4.4s, v20.4s - mov w6, v20.s[0] - mov w7, v21.s[0] - add v5.4s, v5.4s, v21.4s - mov w8, v22.s[0] - mov w9, v23.s[0] - add v6.4s, v6.4s, v22.4s - add a4, a4, w6 - add a5, a5, w7 - add v7.4s, v7.4s, v23.4s - add a6, a6, w8 - add a7, a7, w9 -CPU_BE( rev a4, a4 ) -CPU_BE( rev a5, a5 ) -CPU_BE( rev a6, a6 ) -CPU_BE( rev a7, a7 ) - - // x8[0-3] += s2[0] - // x9[0-3] += s2[1] - // x10[0-3] += s2[2] - // x11[0-3] += s2[3] - add v8.4s, v8.4s, v24.4s - mov w6, v24.s[0] - mov w7, v25.s[0] - add v9.4s, v9.4s, v25.4s - mov w8, v26.s[0] - mov w9, v27.s[0] - add v10.4s, v10.4s, v26.4s - add a8, a8, w6 - add a9, a9, w7 - add v11.4s, v11.4s, v27.4s - add a10, a10, w8 - add a11, a11, w9 -CPU_BE( rev a8, a8 ) -CPU_BE( rev a9, a9 ) -CPU_BE( rev a10, a10 ) -CPU_BE( rev a11, a11 ) - - // x12[0-3] += s3[0] - // x13[0-3] += s3[1] - // x14[0-3] += s3[2] - // x15[0-3] += s3[3] - add v12.4s, v12.4s, v28.4s - mov w6, v28.s[0] - mov w7, v29.s[0] - add v13.4s, v13.4s, v29.4s - mov w8, v30.s[0] - mov w9, v31.s[0] - add v14.4s, v14.4s, v30.4s - add a12, a12, w6 - add a13, a13, w7 - add v15.4s, v15.4s, v31.4s - add a14, a14, w8 - add a15, a15, w9 -CPU_BE( rev a12, a12 ) -CPU_BE( rev a13, a13 ) -CPU_BE( rev a14, a14 ) -CPU_BE( rev a15, a15 ) - - // interleave 32-bit words in state n, n+1 - ldp w6, w7, [x2], #64 - zip1 v16.4s, v0.4s, v1.4s - ldp w8, w9, [x2, #-56] - eor a0, a0, w6 - zip2 v17.4s, v0.4s, v1.4s - eor a1, a1, w7 - zip1 v18.4s, v2.4s, v3.4s - eor a2, a2, w8 - zip2 v19.4s, v2.4s, v3.4s - eor a3, a3, w9 - ldp w6, w7, [x2, #-48] - zip1 v20.4s, v4.4s, v5.4s - ldp w8, w9, [x2, #-40] - eor a4, a4, w6 - zip2 v21.4s, v4.4s, v5.4s - eor a5, a5, w7 - zip1 v22.4s, v6.4s, v7.4s - eor a6, a6, w8 - zip2 v23.4s, v6.4s, v7.4s - eor a7, a7, w9 - ldp w6, w7, [x2, #-32] - zip1 v24.4s, v8.4s, v9.4s - ldp w8, w9, [x2, #-24] - eor a8, a8, w6 - zip2 v25.4s, v8.4s, v9.4s - eor a9, a9, w7 - zip1 v26.4s, v10.4s, v11.4s - eor a10, a10, w8 - zip2 v27.4s, v10.4s, v11.4s - eor a11, a11, w9 - ldp w6, w7, [x2, #-16] - zip1 v28.4s, v12.4s, v13.4s - ldp w8, w9, [x2, #-8] - eor a12, a12, w6 - zip2 v29.4s, v12.4s, v13.4s - eor a13, a13, w7 - zip1 v30.4s, v14.4s, v15.4s - eor a14, a14, w8 - zip2 v31.4s, v14.4s, v15.4s - eor a15, a15, w9 - - add x3, x2, x4 - sub x3, x3, #128 // start of last block - - subs x5, x4, #128 - csel x2, x2, x3, ge - - // interleave 64-bit words in state n, n+2 - zip1 v0.2d, v16.2d, v18.2d - zip2 v4.2d, v16.2d, v18.2d - stp a0, a1, [x1], #64 - zip1 v8.2d, v17.2d, v19.2d - zip2 v12.2d, v17.2d, v19.2d - stp a2, a3, [x1, #-56] - - subs x6, x4, #192 - ld1 {v16.16b-v19.16b}, [x2], #64 - csel x2, x2, x3, ge - - zip1 v1.2d, v20.2d, v22.2d - zip2 v5.2d, v20.2d, v22.2d - stp a4, a5, [x1, #-48] - zip1 v9.2d, v21.2d, v23.2d - zip2 v13.2d, v21.2d, v23.2d - stp a6, a7, [x1, #-40] - - subs x7, x4, #256 - ld1 {v20.16b-v23.16b}, [x2], #64 - csel x2, x2, x3, ge - - zip1 v2.2d, v24.2d, v26.2d - zip2 v6.2d, v24.2d, v26.2d - stp a8, a9, [x1, #-32] - zip1 v10.2d, v25.2d, v27.2d - zip2 v14.2d, v25.2d, v27.2d - stp a10, a11, [x1, #-24] - - subs x8, x4, #320 - ld1 {v24.16b-v27.16b}, [x2], #64 - csel x2, x2, x3, ge - - zip1 v3.2d, v28.2d, v30.2d - zip2 v7.2d, v28.2d, v30.2d - stp a12, a13, [x1, #-16] - zip1 v11.2d, v29.2d, v31.2d - zip2 v15.2d, v29.2d, v31.2d - stp a14, a15, [x1, #-8] - - tbnz x5, #63, .Lt128 - ld1 {v28.16b-v31.16b}, [x2] - - // xor with corresponding input, write to output - eor v16.16b, v16.16b, v0.16b - eor v17.16b, v17.16b, v1.16b - eor v18.16b, v18.16b, v2.16b - eor v19.16b, v19.16b, v3.16b - - tbnz x6, #63, .Lt192 - - eor v20.16b, v20.16b, v4.16b - eor v21.16b, v21.16b, v5.16b - eor v22.16b, v22.16b, v6.16b - eor v23.16b, v23.16b, v7.16b - - st1 {v16.16b-v19.16b}, [x1], #64 - tbnz x7, #63, .Lt256 - - eor v24.16b, v24.16b, v8.16b - eor v25.16b, v25.16b, v9.16b - eor v26.16b, v26.16b, v10.16b - eor v27.16b, v27.16b, v11.16b - - st1 {v20.16b-v23.16b}, [x1], #64 - tbnz x8, #63, .Lt320 - - eor v28.16b, v28.16b, v12.16b - eor v29.16b, v29.16b, v13.16b - eor v30.16b, v30.16b, v14.16b - eor v31.16b, v31.16b, v15.16b - - st1 {v24.16b-v27.16b}, [x1], #64 - st1 {v28.16b-v31.16b}, [x1] - -.Lout: frame_pop - ret - - // fewer than 192 bytes of in/output -.Lt192: cbz x5, 1f // exactly 128 bytes? - ld1 {v28.16b-v31.16b}, [x10] - add x5, x5, x1 - tbl v28.16b, {v4.16b-v7.16b}, v28.16b - tbl v29.16b, {v4.16b-v7.16b}, v29.16b - tbl v30.16b, {v4.16b-v7.16b}, v30.16b - tbl v31.16b, {v4.16b-v7.16b}, v31.16b - -0: eor v20.16b, v20.16b, v28.16b - eor v21.16b, v21.16b, v29.16b - eor v22.16b, v22.16b, v30.16b - eor v23.16b, v23.16b, v31.16b - st1 {v20.16b-v23.16b}, [x5] // overlapping stores -1: st1 {v16.16b-v19.16b}, [x1] - b .Lout - - // fewer than 128 bytes of in/output -.Lt128: ld1 {v28.16b-v31.16b}, [x10] - add x5, x5, x1 - sub x1, x1, #64 - tbl v28.16b, {v0.16b-v3.16b}, v28.16b - tbl v29.16b, {v0.16b-v3.16b}, v29.16b - tbl v30.16b, {v0.16b-v3.16b}, v30.16b - tbl v31.16b, {v0.16b-v3.16b}, v31.16b - ld1 {v16.16b-v19.16b}, [x1] // reload first output block - b 0b - - // fewer than 256 bytes of in/output -.Lt256: cbz x6, 2f // exactly 192 bytes? - ld1 {v4.16b-v7.16b}, [x10] - add x6, x6, x1 - tbl v0.16b, {v8.16b-v11.16b}, v4.16b - tbl v1.16b, {v8.16b-v11.16b}, v5.16b - tbl v2.16b, {v8.16b-v11.16b}, v6.16b - tbl v3.16b, {v8.16b-v11.16b}, v7.16b - - eor v28.16b, v28.16b, v0.16b - eor v29.16b, v29.16b, v1.16b - eor v30.16b, v30.16b, v2.16b - eor v31.16b, v31.16b, v3.16b - st1 {v28.16b-v31.16b}, [x6] // overlapping stores -2: st1 {v20.16b-v23.16b}, [x1] - b .Lout - - // fewer than 320 bytes of in/output -.Lt320: cbz x7, 3f // exactly 256 bytes? - ld1 {v4.16b-v7.16b}, [x10] - add x7, x7, x1 - tbl v0.16b, {v12.16b-v15.16b}, v4.16b - tbl v1.16b, {v12.16b-v15.16b}, v5.16b - tbl v2.16b, {v12.16b-v15.16b}, v6.16b - tbl v3.16b, {v12.16b-v15.16b}, v7.16b - - eor v28.16b, v28.16b, v0.16b - eor v29.16b, v29.16b, v1.16b - eor v30.16b, v30.16b, v2.16b - eor v31.16b, v31.16b, v3.16b - st1 {v28.16b-v31.16b}, [x7] // overlapping stores -3: st1 {v24.16b-v27.16b}, [x1] - b .Lout -SYM_FUNC_END(chacha_4block_xor_neon) - - .section ".rodata", "a", %progbits - .align L1_CACHE_SHIFT -.Lpermute: - .set .Li, 0 - .rept 128 - .byte (.Li - 64) - .set .Li, .Li + 1 - .endr - -CTRINC: .word 1, 2, 3, 4 -ROT8: .word 0x02010003, 0x06050407, 0x0a09080b, 0x0e0d0c0f diff --git a/arch/arm64/lib/crypto/chacha-neon-glue.c b/arch/arm64/lib/crypto/chacha-neon-glue.c deleted file mode 100644 index d0188f974ca5..000000000000 --- a/arch/arm64/lib/crypto/chacha-neon-glue.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * ChaCha and HChaCha functions (ARM64 optimized) - * - * Copyright (C) 2016 - 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Based on: - * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code - * - * Copyright (C) 2015 Martin Willi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <crypto/chacha.h> -#include <crypto/internal/simd.h> -#include <linux/jump_label.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <asm/simd.h> - -asmlinkage void chacha_block_xor_neon(const struct chacha_state *state, - u8 *dst, const u8 *src, int nrounds); -asmlinkage void chacha_4block_xor_neon(const struct chacha_state *state, - u8 *dst, const u8 *src, - int nrounds, int bytes); -asmlinkage void hchacha_block_neon(const struct chacha_state *state, - u32 out[HCHACHA_OUT_WORDS], int nrounds); - -static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); - -static void chacha_doneon(struct chacha_state *state, u8 *dst, const u8 *src, - int bytes, int nrounds) -{ - while (bytes > 0) { - int l = min(bytes, CHACHA_BLOCK_SIZE * 5); - - if (l <= CHACHA_BLOCK_SIZE) { - u8 buf[CHACHA_BLOCK_SIZE]; - - memcpy(buf, src, l); - chacha_block_xor_neon(state, buf, buf, nrounds); - memcpy(dst, buf, l); - state->x[12] += 1; - break; - } - chacha_4block_xor_neon(state, dst, src, nrounds, l); - bytes -= l; - src += l; - dst += l; - state->x[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE); - } -} - -void hchacha_block_arch(const struct chacha_state *state, - u32 out[HCHACHA_OUT_WORDS], int nrounds) -{ - if (!static_branch_likely(&have_neon) || !crypto_simd_usable()) { - hchacha_block_generic(state, out, nrounds); - } else { - kernel_neon_begin(); - hchacha_block_neon(state, out, nrounds); - kernel_neon_end(); - } -} -EXPORT_SYMBOL(hchacha_block_arch); - -void chacha_crypt_arch(struct chacha_state *state, u8 *dst, const u8 *src, - unsigned int bytes, int nrounds) -{ - if (!static_branch_likely(&have_neon) || bytes <= CHACHA_BLOCK_SIZE || - !crypto_simd_usable()) - return chacha_crypt_generic(state, dst, src, bytes, nrounds); - - do { - unsigned int todo = min_t(unsigned int, bytes, SZ_4K); - - kernel_neon_begin(); - chacha_doneon(state, dst, src, todo, nrounds); - kernel_neon_end(); - - bytes -= todo; - src += todo; - dst += todo; - } while (bytes); -} -EXPORT_SYMBOL(chacha_crypt_arch); - -bool chacha_is_arch_optimized(void) -{ - return static_key_enabled(&have_neon); -} -EXPORT_SYMBOL(chacha_is_arch_optimized); - -static int __init chacha_simd_mod_init(void) -{ - if (cpu_have_named_feature(ASIMD)) - static_branch_enable(&have_neon); - return 0; -} -subsys_initcall(chacha_simd_mod_init); - -static void __exit chacha_simd_mod_exit(void) -{ -} -module_exit(chacha_simd_mod_exit); - -MODULE_DESCRIPTION("ChaCha and HChaCha functions (ARM64 optimized)"); -MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm64/lib/crypto/poly1305-armv8.pl b/arch/arm64/lib/crypto/poly1305-armv8.pl deleted file mode 100644 index 22c9069c0650..000000000000 --- a/arch/arm64/lib/crypto/poly1305-armv8.pl +++ /dev/null @@ -1,917 +0,0 @@ -#!/usr/bin/env perl -# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause -# -# ==================================================================== -# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL -# project. -# ==================================================================== -# -# This module implements Poly1305 hash for ARMv8. -# -# June 2015 -# -# Numbers are cycles per processed byte with poly1305_blocks alone. -# -# IALU/gcc-4.9 NEON -# -# Apple A7 1.86/+5% 0.72 -# Cortex-A53 2.69/+58% 1.47 -# Cortex-A57 2.70/+7% 1.14 -# Denver 1.64/+50% 1.18(*) -# X-Gene 2.13/+68% 2.27 -# Mongoose 1.77/+75% 1.12 -# Kryo 2.70/+55% 1.13 -# ThunderX2 1.17/+95% 1.36 -# -# (*) estimate based on resources availability is less than 1.0, -# i.e. measured result is worse than expected, presumably binary -# translator is not almighty; - -$flavour=shift; -$output=shift; - -if ($flavour && $flavour ne "void") { - $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; - ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or - ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or - die "can't locate arm-xlate.pl"; - - open STDOUT,"| \"$^X\" $xlate $flavour $output"; -} else { - open STDOUT,">$output"; -} - -my ($ctx,$inp,$len,$padbit) = map("x$_",(0..3)); -my ($mac,$nonce)=($inp,$len); - -my ($h0,$h1,$h2,$r0,$r1,$s1,$t0,$t1,$d0,$d1,$d2) = map("x$_",(4..14)); - -$code.=<<___; -#ifndef __KERNEL__ -# include "arm_arch.h" -.extern OPENSSL_armcap_P -#endif - -.text - -// forward "declarations" are required for Apple -.globl poly1305_blocks -.globl poly1305_emit - -.globl poly1305_init -.type poly1305_init,%function -.align 5 -poly1305_init: - cmp $inp,xzr - stp xzr,xzr,[$ctx] // zero hash value - stp xzr,xzr,[$ctx,#16] // [along with is_base2_26] - - csel x0,xzr,x0,eq - b.eq .Lno_key - -#ifndef __KERNEL__ - adrp x17,OPENSSL_armcap_P - ldr w17,[x17,#:lo12:OPENSSL_armcap_P] -#endif - - ldp $r0,$r1,[$inp] // load key - mov $s1,#0xfffffffc0fffffff - movk $s1,#0x0fff,lsl#48 -#ifdef __AARCH64EB__ - rev $r0,$r0 // flip bytes - rev $r1,$r1 -#endif - and $r0,$r0,$s1 // &=0ffffffc0fffffff - and $s1,$s1,#-4 - and $r1,$r1,$s1 // &=0ffffffc0ffffffc - mov w#$s1,#-1 - stp $r0,$r1,[$ctx,#32] // save key value - str w#$s1,[$ctx,#48] // impossible key power value - -#ifndef __KERNEL__ - tst w17,#ARMV7_NEON - - adr $d0,.Lpoly1305_blocks - adr $r0,.Lpoly1305_blocks_neon - adr $d1,.Lpoly1305_emit - - csel $d0,$d0,$r0,eq - -# ifdef __ILP32__ - stp w#$d0,w#$d1,[$len] -# else - stp $d0,$d1,[$len] -# endif -#endif - mov x0,#1 -.Lno_key: - ret -.size poly1305_init,.-poly1305_init - -.type poly1305_blocks,%function -.align 5 -poly1305_blocks: -.Lpoly1305_blocks: - ands $len,$len,#-16 - b.eq .Lno_data - - ldp $h0,$h1,[$ctx] // load hash value - ldp $h2,x17,[$ctx,#16] // [along with is_base2_26] - ldp $r0,$r1,[$ctx,#32] // load key value - -#ifdef __AARCH64EB__ - lsr $d0,$h0,#32 - mov w#$d1,w#$h0 - lsr $d2,$h1,#32 - mov w15,w#$h1 - lsr x16,$h2,#32 -#else - mov w#$d0,w#$h0 - lsr $d1,$h0,#32 - mov w#$d2,w#$h1 - lsr x15,$h1,#32 - mov w16,w#$h2 -#endif - - add $d0,$d0,$d1,lsl#26 // base 2^26 -> base 2^64 - lsr $d1,$d2,#12 - adds $d0,$d0,$d2,lsl#52 - add $d1,$d1,x15,lsl#14 - adc $d1,$d1,xzr - lsr $d2,x16,#24 - adds $d1,$d1,x16,lsl#40 - adc $d2,$d2,xzr - - cmp x17,#0 // is_base2_26? - add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) - csel $h0,$h0,$d0,eq // choose between radixes - csel $h1,$h1,$d1,eq - csel $h2,$h2,$d2,eq - -.Loop: - ldp $t0,$t1,[$inp],#16 // load input - sub $len,$len,#16 -#ifdef __AARCH64EB__ - rev $t0,$t0 - rev $t1,$t1 -#endif - adds $h0,$h0,$t0 // accumulate input - adcs $h1,$h1,$t1 - - mul $d0,$h0,$r0 // h0*r0 - adc $h2,$h2,$padbit - umulh $d1,$h0,$r0 - - mul $t0,$h1,$s1 // h1*5*r1 - umulh $t1,$h1,$s1 - - adds $d0,$d0,$t0 - mul $t0,$h0,$r1 // h0*r1 - adc $d1,$d1,$t1 - umulh $d2,$h0,$r1 - - adds $d1,$d1,$t0 - mul $t0,$h1,$r0 // h1*r0 - adc $d2,$d2,xzr - umulh $t1,$h1,$r0 - - adds $d1,$d1,$t0 - mul $t0,$h2,$s1 // h2*5*r1 - adc $d2,$d2,$t1 - mul $t1,$h2,$r0 // h2*r0 - - adds $d1,$d1,$t0 - adc $d2,$d2,$t1 - - and $t0,$d2,#-4 // final reduction - and $h2,$d2,#3 - add $t0,$t0,$d2,lsr#2 - adds $h0,$d0,$t0 - adcs $h1,$d1,xzr - adc $h2,$h2,xzr - - cbnz $len,.Loop - - stp $h0,$h1,[$ctx] // store hash value - stp $h2,xzr,[$ctx,#16] // [and clear is_base2_26] - -.Lno_data: - ret -.size poly1305_blocks,.-poly1305_blocks - -.type poly1305_emit,%function -.align 5 -poly1305_emit: -.Lpoly1305_emit: - ldp $h0,$h1,[$ctx] // load hash base 2^64 - ldp $h2,$r0,[$ctx,#16] // [along with is_base2_26] - ldp $t0,$t1,[$nonce] // load nonce - -#ifdef __AARCH64EB__ - lsr $d0,$h0,#32 - mov w#$d1,w#$h0 - lsr $d2,$h1,#32 - mov w15,w#$h1 - lsr x16,$h2,#32 -#else - mov w#$d0,w#$h0 - lsr $d1,$h0,#32 - mov w#$d2,w#$h1 - lsr x15,$h1,#32 - mov w16,w#$h2 -#endif - - add $d0,$d0,$d1,lsl#26 // base 2^26 -> base 2^64 - lsr $d1,$d2,#12 - adds $d0,$d0,$d2,lsl#52 - add $d1,$d1,x15,lsl#14 - adc $d1,$d1,xzr - lsr $d2,x16,#24 - adds $d1,$d1,x16,lsl#40 - adc $d2,$d2,xzr - - cmp $r0,#0 // is_base2_26? - csel $h0,$h0,$d0,eq // choose between radixes - csel $h1,$h1,$d1,eq - csel $h2,$h2,$d2,eq - - adds $d0,$h0,#5 // compare to modulus - adcs $d1,$h1,xzr - adc $d2,$h2,xzr - - tst $d2,#-4 // see if it's carried/borrowed - - csel $h0,$h0,$d0,eq - csel $h1,$h1,$d1,eq - -#ifdef __AARCH64EB__ - ror $t0,$t0,#32 // flip nonce words - ror $t1,$t1,#32 -#endif - adds $h0,$h0,$t0 // accumulate nonce - adc $h1,$h1,$t1 -#ifdef __AARCH64EB__ - rev $h0,$h0 // flip output bytes - rev $h1,$h1 -#endif - stp $h0,$h1,[$mac] // write result - - ret -.size poly1305_emit,.-poly1305_emit -___ -my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("v$_.4s",(0..8)); -my ($IN01_0,$IN01_1,$IN01_2,$IN01_3,$IN01_4) = map("v$_.2s",(9..13)); -my ($IN23_0,$IN23_1,$IN23_2,$IN23_3,$IN23_4) = map("v$_.2s",(14..18)); -my ($ACC0,$ACC1,$ACC2,$ACC3,$ACC4) = map("v$_.2d",(19..23)); -my ($H0,$H1,$H2,$H3,$H4) = map("v$_.2s",(24..28)); -my ($T0,$T1,$MASK) = map("v$_",(29..31)); - -my ($in2,$zeros)=("x16","x17"); -my $is_base2_26 = $zeros; # borrow - -$code.=<<___; -.type poly1305_mult,%function -.align 5 -poly1305_mult: - mul $d0,$h0,$r0 // h0*r0 - umulh $d1,$h0,$r0 - - mul $t0,$h1,$s1 // h1*5*r1 - umulh $t1,$h1,$s1 - - adds $d0,$d0,$t0 - mul $t0,$h0,$r1 // h0*r1 - adc $d1,$d1,$t1 - umulh $d2,$h0,$r1 - - adds $d1,$d1,$t0 - mul $t0,$h1,$r0 // h1*r0 - adc $d2,$d2,xzr - umulh $t1,$h1,$r0 - - adds $d1,$d1,$t0 - mul $t0,$h2,$s1 // h2*5*r1 - adc $d2,$d2,$t1 - mul $t1,$h2,$r0 // h2*r0 - - adds $d1,$d1,$t0 - adc $d2,$d2,$t1 - - and $t0,$d2,#-4 // final reduction - and $h2,$d2,#3 - add $t0,$t0,$d2,lsr#2 - adds $h0,$d0,$t0 - adcs $h1,$d1,xzr - adc $h2,$h2,xzr - - ret -.size poly1305_mult,.-poly1305_mult - -.type poly1305_splat,%function -.align 4 -poly1305_splat: - and x12,$h0,#0x03ffffff // base 2^64 -> base 2^26 - ubfx x13,$h0,#26,#26 - extr x14,$h1,$h0,#52 - and x14,x14,#0x03ffffff - ubfx x15,$h1,#14,#26 - extr x16,$h2,$h1,#40 - - str w12,[$ctx,#16*0] // r0 - add w12,w13,w13,lsl#2 // r1*5 - str w13,[$ctx,#16*1] // r1 - add w13,w14,w14,lsl#2 // r2*5 - str w12,[$ctx,#16*2] // s1 - str w14,[$ctx,#16*3] // r2 - add w14,w15,w15,lsl#2 // r3*5 - str w13,[$ctx,#16*4] // s2 - str w15,[$ctx,#16*5] // r3 - add w15,w16,w16,lsl#2 // r4*5 - str w14,[$ctx,#16*6] // s3 - str w16,[$ctx,#16*7] // r4 - str w15,[$ctx,#16*8] // s4 - - ret -.size poly1305_splat,.-poly1305_splat - -#ifdef __KERNEL__ -.globl poly1305_blocks_neon -#endif -.type poly1305_blocks_neon,%function -.align 5 -poly1305_blocks_neon: -.Lpoly1305_blocks_neon: - ldr $is_base2_26,[$ctx,#24] - cmp $len,#128 - b.lo .Lpoly1305_blocks - - .inst 0xd503233f // paciasp - stp x29,x30,[sp,#-80]! - add x29,sp,#0 - - stp d8,d9,[sp,#16] // meet ABI requirements - stp d10,d11,[sp,#32] - stp d12,d13,[sp,#48] - stp d14,d15,[sp,#64] - - cbz $is_base2_26,.Lbase2_64_neon - - ldp w10,w11,[$ctx] // load hash value base 2^26 - ldp w12,w13,[$ctx,#8] - ldr w14,[$ctx,#16] - - tst $len,#31 - b.eq .Leven_neon - - ldp $r0,$r1,[$ctx,#32] // load key value - - add $h0,x10,x11,lsl#26 // base 2^26 -> base 2^64 - lsr $h1,x12,#12 - adds $h0,$h0,x12,lsl#52 - add $h1,$h1,x13,lsl#14 - adc $h1,$h1,xzr - lsr $h2,x14,#24 - adds $h1,$h1,x14,lsl#40 - adc $d2,$h2,xzr // can be partially reduced... - - ldp $d0,$d1,[$inp],#16 // load input - sub $len,$len,#16 - add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) - -#ifdef __AARCH64EB__ - rev $d0,$d0 - rev $d1,$d1 -#endif - adds $h0,$h0,$d0 // accumulate input - adcs $h1,$h1,$d1 - adc $h2,$h2,$padbit - - bl poly1305_mult - - and x10,$h0,#0x03ffffff // base 2^64 -> base 2^26 - ubfx x11,$h0,#26,#26 - extr x12,$h1,$h0,#52 - and x12,x12,#0x03ffffff - ubfx x13,$h1,#14,#26 - extr x14,$h2,$h1,#40 - - b .Leven_neon - -.align 4 -.Lbase2_64_neon: - ldp $r0,$r1,[$ctx,#32] // load key value - - ldp $h0,$h1,[$ctx] // load hash value base 2^64 - ldr $h2,[$ctx,#16] - - tst $len,#31 - b.eq .Linit_neon - - ldp $d0,$d1,[$inp],#16 // load input - sub $len,$len,#16 - add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) -#ifdef __AARCH64EB__ - rev $d0,$d0 - rev $d1,$d1 -#endif - adds $h0,$h0,$d0 // accumulate input - adcs $h1,$h1,$d1 - adc $h2,$h2,$padbit - - bl poly1305_mult - -.Linit_neon: - ldr w17,[$ctx,#48] // first table element - and x10,$h0,#0x03ffffff // base 2^64 -> base 2^26 - ubfx x11,$h0,#26,#26 - extr x12,$h1,$h0,#52 - and x12,x12,#0x03ffffff - ubfx x13,$h1,#14,#26 - extr x14,$h2,$h1,#40 - - cmp w17,#-1 // is value impossible? - b.ne .Leven_neon - - fmov ${H0},x10 - fmov ${H1},x11 - fmov ${H2},x12 - fmov ${H3},x13 - fmov ${H4},x14 - - ////////////////////////////////// initialize r^n table - mov $h0,$r0 // r^1 - add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) - mov $h1,$r1 - mov $h2,xzr - add $ctx,$ctx,#48+12 - bl poly1305_splat - - bl poly1305_mult // r^2 - sub $ctx,$ctx,#4 - bl poly1305_splat - - bl poly1305_mult // r^3 - sub $ctx,$ctx,#4 - bl poly1305_splat - - bl poly1305_mult // r^4 - sub $ctx,$ctx,#4 - bl poly1305_splat - sub $ctx,$ctx,#48 // restore original $ctx - b .Ldo_neon - -.align 4 -.Leven_neon: - fmov ${H0},x10 - fmov ${H1},x11 - fmov ${H2},x12 - fmov ${H3},x13 - fmov ${H4},x14 - -.Ldo_neon: - ldp x8,x12,[$inp,#32] // inp[2:3] - subs $len,$len,#64 - ldp x9,x13,[$inp,#48] - add $in2,$inp,#96 - adrp $zeros,.Lzeros - add $zeros,$zeros,#:lo12:.Lzeros - - lsl $padbit,$padbit,#24 - add x15,$ctx,#48 - -#ifdef __AARCH64EB__ - rev x8,x8 - rev x12,x12 - rev x9,x9 - rev x13,x13 -#endif - and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 - and x5,x9,#0x03ffffff - ubfx x6,x8,#26,#26 - ubfx x7,x9,#26,#26 - add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 - extr x8,x12,x8,#52 - extr x9,x13,x9,#52 - add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 - fmov $IN23_0,x4 - and x8,x8,#0x03ffffff - and x9,x9,#0x03ffffff - ubfx x10,x12,#14,#26 - ubfx x11,x13,#14,#26 - add x12,$padbit,x12,lsr#40 - add x13,$padbit,x13,lsr#40 - add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 - fmov $IN23_1,x6 - add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 - add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 - fmov $IN23_2,x8 - fmov $IN23_3,x10 - fmov $IN23_4,x12 - - ldp x8,x12,[$inp],#16 // inp[0:1] - ldp x9,x13,[$inp],#48 - - ld1 {$R0,$R1,$S1,$R2},[x15],#64 - ld1 {$S2,$R3,$S3,$R4},[x15],#64 - ld1 {$S4},[x15] - -#ifdef __AARCH64EB__ - rev x8,x8 - rev x12,x12 - rev x9,x9 - rev x13,x13 -#endif - and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 - and x5,x9,#0x03ffffff - ubfx x6,x8,#26,#26 - ubfx x7,x9,#26,#26 - add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 - extr x8,x12,x8,#52 - extr x9,x13,x9,#52 - add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 - fmov $IN01_0,x4 - and x8,x8,#0x03ffffff - and x9,x9,#0x03ffffff - ubfx x10,x12,#14,#26 - ubfx x11,x13,#14,#26 - add x12,$padbit,x12,lsr#40 - add x13,$padbit,x13,lsr#40 - add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 - fmov $IN01_1,x6 - add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 - add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 - movi $MASK.2d,#-1 - fmov $IN01_2,x8 - fmov $IN01_3,x10 - fmov $IN01_4,x12 - ushr $MASK.2d,$MASK.2d,#38 - - b.ls .Lskip_loop - -.align 4 -.Loop_neon: - //////////////////////////////////////////////////////////////// - // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2 - // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r - // \___________________/ - // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2 - // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r - // \___________________/ \____________________/ - // - // Note that we start with inp[2:3]*r^2. This is because it - // doesn't depend on reduction in previous iteration. - //////////////////////////////////////////////////////////////// - // d4 = h0*r4 + h1*r3 + h2*r2 + h3*r1 + h4*r0 - // d3 = h0*r3 + h1*r2 + h2*r1 + h3*r0 + h4*5*r4 - // d2 = h0*r2 + h1*r1 + h2*r0 + h3*5*r4 + h4*5*r3 - // d1 = h0*r1 + h1*r0 + h2*5*r4 + h3*5*r3 + h4*5*r2 - // d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1 - - subs $len,$len,#64 - umull $ACC4,$IN23_0,${R4}[2] - csel $in2,$zeros,$in2,lo - umull $ACC3,$IN23_0,${R3}[2] - umull $ACC2,$IN23_0,${R2}[2] - ldp x8,x12,[$in2],#16 // inp[2:3] (or zero) - umull $ACC1,$IN23_0,${R1}[2] - ldp x9,x13,[$in2],#48 - umull $ACC0,$IN23_0,${R0}[2] -#ifdef __AARCH64EB__ - rev x8,x8 - rev x12,x12 - rev x9,x9 - rev x13,x13 -#endif - - umlal $ACC4,$IN23_1,${R3}[2] - and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 - umlal $ACC3,$IN23_1,${R2}[2] - and x5,x9,#0x03ffffff - umlal $ACC2,$IN23_1,${R1}[2] - ubfx x6,x8,#26,#26 - umlal $ACC1,$IN23_1,${R0}[2] - ubfx x7,x9,#26,#26 - umlal $ACC0,$IN23_1,${S4}[2] - add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 - - umlal $ACC4,$IN23_2,${R2}[2] - extr x8,x12,x8,#52 - umlal $ACC3,$IN23_2,${R1}[2] - extr x9,x13,x9,#52 - umlal $ACC2,$IN23_2,${R0}[2] - add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 - umlal $ACC1,$IN23_2,${S4}[2] - fmov $IN23_0,x4 - umlal $ACC0,$IN23_2,${S3}[2] - and x8,x8,#0x03ffffff - - umlal $ACC4,$IN23_3,${R1}[2] - and x9,x9,#0x03ffffff - umlal $ACC3,$IN23_3,${R0}[2] - ubfx x10,x12,#14,#26 - umlal $ACC2,$IN23_3,${S4}[2] - ubfx x11,x13,#14,#26 - umlal $ACC1,$IN23_3,${S3}[2] - add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 - umlal $ACC0,$IN23_3,${S2}[2] - fmov $IN23_1,x6 - - add $IN01_2,$IN01_2,$H2 - add x12,$padbit,x12,lsr#40 - umlal $ACC4,$IN23_4,${R0}[2] - add x13,$padbit,x13,lsr#40 - umlal $ACC3,$IN23_4,${S4}[2] - add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 - umlal $ACC2,$IN23_4,${S3}[2] - add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 - umlal $ACC1,$IN23_4,${S2}[2] - fmov $IN23_2,x8 - umlal $ACC0,$IN23_4,${S1}[2] - fmov $IN23_3,x10 - - //////////////////////////////////////////////////////////////// - // (hash+inp[0:1])*r^4 and accumulate - - add $IN01_0,$IN01_0,$H0 - fmov $IN23_4,x12 - umlal $ACC3,$IN01_2,${R1}[0] - ldp x8,x12,[$inp],#16 // inp[0:1] - umlal $ACC0,$IN01_2,${S3}[0] - ldp x9,x13,[$inp],#48 - umlal $ACC4,$IN01_2,${R2}[0] - umlal $ACC1,$IN01_2,${S4}[0] - umlal $ACC2,$IN01_2,${R0}[0] -#ifdef __AARCH64EB__ - rev x8,x8 - rev x12,x12 - rev x9,x9 - rev x13,x13 -#endif - - add $IN01_1,$IN01_1,$H1 - umlal $ACC3,$IN01_0,${R3}[0] - umlal $ACC4,$IN01_0,${R4}[0] - and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 - umlal $ACC2,$IN01_0,${R2}[0] - and x5,x9,#0x03ffffff - umlal $ACC0,$IN01_0,${R0}[0] - ubfx x6,x8,#26,#26 - umlal $ACC1,$IN01_0,${R1}[0] - ubfx x7,x9,#26,#26 - - add $IN01_3,$IN01_3,$H3 - add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 - umlal $ACC3,$IN01_1,${R2}[0] - extr x8,x12,x8,#52 - umlal $ACC4,$IN01_1,${R3}[0] - extr x9,x13,x9,#52 - umlal $ACC0,$IN01_1,${S4}[0] - add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 - umlal $ACC2,$IN01_1,${R1}[0] - fmov $IN01_0,x4 - umlal $ACC1,$IN01_1,${R0}[0] - and x8,x8,#0x03ffffff - - add $IN01_4,$IN01_4,$H4 - and x9,x9,#0x03ffffff - umlal $ACC3,$IN01_3,${R0}[0] - ubfx x10,x12,#14,#26 - umlal $ACC0,$IN01_3,${S2}[0] - ubfx x11,x13,#14,#26 - umlal $ACC4,$IN01_3,${R1}[0] - add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 - umlal $ACC1,$IN01_3,${S3}[0] - fmov $IN01_1,x6 - umlal $ACC2,$IN01_3,${S4}[0] - add x12,$padbit,x12,lsr#40 - - umlal $ACC3,$IN01_4,${S4}[0] - add x13,$padbit,x13,lsr#40 - umlal $ACC0,$IN01_4,${S1}[0] - add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 - umlal $ACC4,$IN01_4,${R0}[0] - add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 - umlal $ACC1,$IN01_4,${S2}[0] - fmov $IN01_2,x8 - umlal $ACC2,$IN01_4,${S3}[0] - fmov $IN01_3,x10 - fmov $IN01_4,x12 - - ///////////////////////////////////////////////////////////////// - // lazy reduction as discussed in "NEON crypto" by D.J. Bernstein - // and P. Schwabe - // - // [see discussion in poly1305-armv4 module] - - ushr $T0.2d,$ACC3,#26 - xtn $H3,$ACC3 - ushr $T1.2d,$ACC0,#26 - and $ACC0,$ACC0,$MASK.2d - add $ACC4,$ACC4,$T0.2d // h3 -> h4 - bic $H3,#0xfc,lsl#24 // &=0x03ffffff - add $ACC1,$ACC1,$T1.2d // h0 -> h1 - - ushr $T0.2d,$ACC4,#26 - xtn $H4,$ACC4 - ushr $T1.2d,$ACC1,#26 - xtn $H1,$ACC1 - bic $H4,#0xfc,lsl#24 - add $ACC2,$ACC2,$T1.2d // h1 -> h2 - - add $ACC0,$ACC0,$T0.2d - shl $T0.2d,$T0.2d,#2 - shrn $T1.2s,$ACC2,#26 - xtn $H2,$ACC2 - add $ACC0,$ACC0,$T0.2d // h4 -> h0 - bic $H1,#0xfc,lsl#24 - add $H3,$H3,$T1.2s // h2 -> h3 - bic $H2,#0xfc,lsl#24 - - shrn $T0.2s,$ACC0,#26 - xtn $H0,$ACC0 - ushr $T1.2s,$H3,#26 - bic $H3,#0xfc,lsl#24 - bic $H0,#0xfc,lsl#24 - add $H1,$H1,$T0.2s // h0 -> h1 - add $H4,$H4,$T1.2s // h3 -> h4 - - b.hi .Loop_neon - -.Lskip_loop: - dup $IN23_2,${IN23_2}[0] - add $IN01_2,$IN01_2,$H2 - - //////////////////////////////////////////////////////////////// - // multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1 - - adds $len,$len,#32 - b.ne .Long_tail - - dup $IN23_2,${IN01_2}[0] - add $IN23_0,$IN01_0,$H0 - add $IN23_3,$IN01_3,$H3 - add $IN23_1,$IN01_1,$H1 - add $IN23_4,$IN01_4,$H4 - -.Long_tail: - dup $IN23_0,${IN23_0}[0] - umull2 $ACC0,$IN23_2,${S3} - umull2 $ACC3,$IN23_2,${R1} - umull2 $ACC4,$IN23_2,${R2} - umull2 $ACC2,$IN23_2,${R0} - umull2 $ACC1,$IN23_2,${S4} - - dup $IN23_1,${IN23_1}[0] - umlal2 $ACC0,$IN23_0,${R0} - umlal2 $ACC2,$IN23_0,${R2} - umlal2 $ACC3,$IN23_0,${R3} - umlal2 $ACC4,$IN23_0,${R4} - umlal2 $ACC1,$IN23_0,${R1} - - dup $IN23_3,${IN23_3}[0] - umlal2 $ACC0,$IN23_1,${S4} - umlal2 $ACC3,$IN23_1,${R2} - umlal2 $ACC2,$IN23_1,${R1} - umlal2 $ACC4,$IN23_1,${R3} - umlal2 $ACC1,$IN23_1,${R0} - - dup $IN23_4,${IN23_4}[0] - umlal2 $ACC3,$IN23_3,${R0} - umlal2 $ACC4,$IN23_3,${R1} - umlal2 $ACC0,$IN23_3,${S2} - umlal2 $ACC1,$IN23_3,${S3} - umlal2 $ACC2,$IN23_3,${S4} - - umlal2 $ACC3,$IN23_4,${S4} - umlal2 $ACC0,$IN23_4,${S1} - umlal2 $ACC4,$IN23_4,${R0} - umlal2 $ACC1,$IN23_4,${S2} - umlal2 $ACC2,$IN23_4,${S3} - - b.eq .Lshort_tail - - //////////////////////////////////////////////////////////////// - // (hash+inp[0:1])*r^4:r^3 and accumulate - - add $IN01_0,$IN01_0,$H0 - umlal $ACC3,$IN01_2,${R1} - umlal $ACC0,$IN01_2,${S3} - umlal $ACC4,$IN01_2,${R2} - umlal $ACC1,$IN01_2,${S4} - umlal $ACC2,$IN01_2,${R0} - - add $IN01_1,$IN01_1,$H1 - umlal $ACC3,$IN01_0,${R3} - umlal $ACC0,$IN01_0,${R0} - umlal $ACC4,$IN01_0,${R4} - umlal $ACC1,$IN01_0,${R1} - umlal $ACC2,$IN01_0,${R2} - - add $IN01_3,$IN01_3,$H3 - umlal $ACC3,$IN01_1,${R2} - umlal $ACC0,$IN01_1,${S4} - umlal $ACC4,$IN01_1,${R3} - umlal $ACC1,$IN01_1,${R0} - umlal $ACC2,$IN01_1,${R1} - - add $IN01_4,$IN01_4,$H4 - umlal $ACC3,$IN01_3,${R0} - umlal $ACC0,$IN01_3,${S2} - umlal $ACC4,$IN01_3,${R1} - umlal $ACC1,$IN01_3,${S3} - umlal $ACC2,$IN01_3,${S4} - - umlal $ACC3,$IN01_4,${S4} - umlal $ACC0,$IN01_4,${S1} - umlal $ACC4,$IN01_4,${R0} - umlal $ACC1,$IN01_4,${S2} - umlal $ACC2,$IN01_4,${S3} - -.Lshort_tail: - //////////////////////////////////////////////////////////////// - // horizontal add - - addp $ACC3,$ACC3,$ACC3 - ldp d8,d9,[sp,#16] // meet ABI requirements - addp $ACC0,$ACC0,$ACC0 - ldp d10,d11,[sp,#32] - addp $ACC4,$ACC4,$ACC4 - ldp d12,d13,[sp,#48] - addp $ACC1,$ACC1,$ACC1 - ldp d14,d15,[sp,#64] - addp $ACC2,$ACC2,$ACC2 - ldr x30,[sp,#8] - - //////////////////////////////////////////////////////////////// - // lazy reduction, but without narrowing - - ushr $T0.2d,$ACC3,#26 - and $ACC3,$ACC3,$MASK.2d - ushr $T1.2d,$ACC0,#26 - and $ACC0,$ACC0,$MASK.2d - - add $ACC4,$ACC4,$T0.2d // h3 -> h4 - add $ACC1,$ACC1,$T1.2d // h0 -> h1 - - ushr $T0.2d,$ACC4,#26 - and $ACC4,$ACC4,$MASK.2d - ushr $T1.2d,$ACC1,#26 - and $ACC1,$ACC1,$MASK.2d - add $ACC2,$ACC2,$T1.2d // h1 -> h2 - - add $ACC0,$ACC0,$T0.2d - shl $T0.2d,$T0.2d,#2 - ushr $T1.2d,$ACC2,#26 - and $ACC2,$ACC2,$MASK.2d - add $ACC0,$ACC0,$T0.2d // h4 -> h0 - add $ACC3,$ACC3,$T1.2d // h2 -> h3 - - ushr $T0.2d,$ACC0,#26 - and $ACC0,$ACC0,$MASK.2d - ushr $T1.2d,$ACC3,#26 - and $ACC3,$ACC3,$MASK.2d - add $ACC1,$ACC1,$T0.2d // h0 -> h1 - add $ACC4,$ACC4,$T1.2d // h3 -> h4 - - //////////////////////////////////////////////////////////////// - // write the result, can be partially reduced - - st4 {$ACC0,$ACC1,$ACC2,$ACC3}[0],[$ctx],#16 - mov x4,#1 - st1 {$ACC4}[0],[$ctx] - str x4,[$ctx,#8] // set is_base2_26 - - ldr x29,[sp],#80 - .inst 0xd50323bf // autiasp - ret -.size poly1305_blocks_neon,.-poly1305_blocks_neon - -.pushsection .rodata -.align 5 -.Lzeros: -.long 0,0,0,0,0,0,0,0 -.asciz "Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm" -.popsection - -.align 2 -#if !defined(__KERNEL__) && !defined(_WIN64) -.comm OPENSSL_armcap_P,4,4 -.hidden OPENSSL_armcap_P -#endif -___ - -foreach (split("\n",$code)) { - s/\b(shrn\s+v[0-9]+)\.[24]d/$1.2s/ or - s/\b(fmov\s+)v([0-9]+)[^,]*,\s*x([0-9]+)/$1d$2,x$3/ or - (m/\bdup\b/ and (s/\.[24]s/.2d/g or 1)) or - (m/\b(eor|and)/ and (s/\.[248][sdh]/.16b/g or 1)) or - (m/\bum(ul|la)l\b/ and (s/\.4s/.2s/g or 1)) or - (m/\bum(ul|la)l2\b/ and (s/\.2s/.4s/g or 1)) or - (m/\bst[1-4]\s+{[^}]+}\[/ and (s/\.[24]d/.s/g or 1)); - - s/\.[124]([sd])\[/.$1\[/; - s/w#x([0-9]+)/w$1/g; - - print $_,"\n"; -} -close STDOUT; diff --git a/arch/arm64/lib/crypto/poly1305-glue.c b/arch/arm64/lib/crypto/poly1305-glue.c deleted file mode 100644 index c9a74766785b..000000000000 --- a/arch/arm64/lib/crypto/poly1305-glue.c +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * OpenSSL/Cryptogams accelerated Poly1305 transform for arm64 - * - * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org> - */ - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <crypto/internal/poly1305.h> -#include <linux/cpufeature.h> -#include <linux/jump_label.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/unaligned.h> - -asmlinkage void poly1305_block_init_arch( - struct poly1305_block_state *state, - const u8 raw_key[POLY1305_BLOCK_SIZE]); -EXPORT_SYMBOL_GPL(poly1305_block_init_arch); -asmlinkage void poly1305_blocks(struct poly1305_block_state *state, - const u8 *src, u32 len, u32 hibit); -asmlinkage void poly1305_blocks_neon(struct poly1305_block_state *state, - const u8 *src, u32 len, u32 hibit); -asmlinkage void poly1305_emit_arch(const struct poly1305_state *state, - u8 digest[POLY1305_DIGEST_SIZE], - const u32 nonce[4]); -EXPORT_SYMBOL_GPL(poly1305_emit_arch); - -static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); - -void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src, - unsigned int len, u32 padbit) -{ - len = round_down(len, POLY1305_BLOCK_SIZE); - if (static_branch_likely(&have_neon)) { - do { - unsigned int todo = min_t(unsigned int, len, SZ_4K); - - kernel_neon_begin(); - poly1305_blocks_neon(state, src, todo, padbit); - kernel_neon_end(); - - len -= todo; - src += todo; - } while (len); - } else - poly1305_blocks(state, src, len, padbit); -} -EXPORT_SYMBOL_GPL(poly1305_blocks_arch); - -bool poly1305_is_arch_optimized(void) -{ - /* We always can use at least the ARM64 scalar implementation. */ - return true; -} -EXPORT_SYMBOL(poly1305_is_arch_optimized); - -static int __init neon_poly1305_mod_init(void) -{ - if (cpu_have_named_feature(ASIMD)) - static_branch_enable(&have_neon); - return 0; -} -subsys_initcall(neon_poly1305_mod_init); - -static void __exit neon_poly1305_mod_exit(void) -{ -} -module_exit(neon_poly1305_mod_exit); - -MODULE_DESCRIPTION("Poly1305 authenticator (ARM64 optimized)"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm64/lib/crypto/sha2-armv8.pl b/arch/arm64/lib/crypto/sha2-armv8.pl deleted file mode 100644 index 4aebd20c498b..000000000000 --- a/arch/arm64/lib/crypto/sha2-armv8.pl +++ /dev/null @@ -1,786 +0,0 @@ -#! /usr/bin/env perl -# SPDX-License-Identifier: GPL-2.0 - -# This code is taken from the OpenSSL project but the author (Andy Polyakov) -# has relicensed it under the GPLv2. Therefore this program is free software; -# you can redistribute it and/or modify it under the terms of the GNU General -# Public License version 2 as published by the Free Software Foundation. -# -# The original headers, including the original license headers, are -# included below for completeness. - -# Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved. -# -# Licensed under the OpenSSL license (the "License"). You may not use -# this file except in compliance with the License. You can obtain a copy -# in the file LICENSE in the source distribution or at -# https://www.openssl.org/source/license.html - -# ==================================================================== -# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL -# project. The module is, however, dual licensed under OpenSSL and -# CRYPTOGAMS licenses depending on where you obtain it. For further -# details see http://www.openssl.org/~appro/cryptogams/. -# ==================================================================== -# -# SHA256/512 for ARMv8. -# -# Performance in cycles per processed byte and improvement coefficient -# over code generated with "default" compiler: -# -# SHA256-hw SHA256(*) SHA512 -# Apple A7 1.97 10.5 (+33%) 6.73 (-1%(**)) -# Cortex-A53 2.38 15.5 (+115%) 10.0 (+150%(***)) -# Cortex-A57 2.31 11.6 (+86%) 7.51 (+260%(***)) -# Denver 2.01 10.5 (+26%) 6.70 (+8%) -# X-Gene 20.0 (+100%) 12.8 (+300%(***)) -# Mongoose 2.36 13.0 (+50%) 8.36 (+33%) -# -# (*) Software SHA256 results are of lesser relevance, presented -# mostly for informational purposes. -# (**) The result is a trade-off: it's possible to improve it by -# 10% (or by 1 cycle per round), but at the cost of 20% loss -# on Cortex-A53 (or by 4 cycles per round). -# (***) Super-impressive coefficients over gcc-generated code are -# indication of some compiler "pathology", most notably code -# generated with -mgeneral-regs-only is significantly faster -# and the gap is only 40-90%. -# -# October 2016. -# -# Originally it was reckoned that it makes no sense to implement NEON -# version of SHA256 for 64-bit processors. This is because performance -# improvement on most wide-spread Cortex-A5x processors was observed -# to be marginal, same on Cortex-A53 and ~10% on A57. But then it was -# observed that 32-bit NEON SHA256 performs significantly better than -# 64-bit scalar version on *some* of the more recent processors. As -# result 64-bit NEON version of SHA256 was added to provide best -# all-round performance. For example it executes ~30% faster on X-Gene -# and Mongoose. [For reference, NEON version of SHA512 is bound to -# deliver much less improvement, likely *negative* on Cortex-A5x. -# Which is why NEON support is limited to SHA256.] - -$output=pop; -$flavour=pop; - -if ($flavour && $flavour ne "void") { - $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; - ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or - ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or - die "can't locate arm-xlate.pl"; - - open OUT,"| \"$^X\" $xlate $flavour $output"; - *STDOUT=*OUT; -} else { - open STDOUT,">$output"; -} - -if ($output =~ /512/) { - $BITS=512; - $SZ=8; - @Sigma0=(28,34,39); - @Sigma1=(14,18,41); - @sigma0=(1, 8, 7); - @sigma1=(19,61, 6); - $rounds=80; - $reg_t="x"; -} else { - $BITS=256; - $SZ=4; - @Sigma0=( 2,13,22); - @Sigma1=( 6,11,25); - @sigma0=( 7,18, 3); - @sigma1=(17,19,10); - $rounds=64; - $reg_t="w"; -} - -$func="sha${BITS}_blocks_arch"; - -($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30)); - -@X=map("$reg_t$_",(3..15,0..2)); -@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27)); -($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28)); - -sub BODY_00_xx { -my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_; -my $j=($i+1)&15; -my ($T0,$T1,$T2)=(@X[($i-8)&15],@X[($i-9)&15],@X[($i-10)&15]); - $T0=@X[$i+3] if ($i<11); - -$code.=<<___ if ($i<16); -#ifndef __AARCH64EB__ - rev @X[$i],@X[$i] // $i -#endif -___ -$code.=<<___ if ($i<13 && ($i&1)); - ldp @X[$i+1],@X[$i+2],[$inp],#2*$SZ -___ -$code.=<<___ if ($i==13); - ldp @X[14],@X[15],[$inp] -___ -$code.=<<___ if ($i>=14); - ldr @X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`] -___ -$code.=<<___ if ($i>0 && $i<16); - add $a,$a,$t1 // h+=Sigma0(a) -___ -$code.=<<___ if ($i>=11); - str @X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`] -___ -# While ARMv8 specifies merged rotate-n-logical operation such as -# 'eor x,y,z,ror#n', it was found to negatively affect performance -# on Apple A7. The reason seems to be that it requires even 'y' to -# be available earlier. This means that such merged instruction is -# not necessarily best choice on critical path... On the other hand -# Cortex-A5x handles merged instructions much better than disjoint -# rotate and logical... See (**) footnote above. -$code.=<<___ if ($i<15); - ror $t0,$e,#$Sigma1[0] - add $h,$h,$t2 // h+=K[i] - eor $T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]` - and $t1,$f,$e - bic $t2,$g,$e - add $h,$h,@X[$i&15] // h+=X[i] - orr $t1,$t1,$t2 // Ch(e,f,g) - eor $t2,$a,$b // a^b, b^c in next round - eor $t0,$t0,$T0,ror#$Sigma1[1] // Sigma1(e) - ror $T0,$a,#$Sigma0[0] - add $h,$h,$t1 // h+=Ch(e,f,g) - eor $t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]` - add $h,$h,$t0 // h+=Sigma1(e) - and $t3,$t3,$t2 // (b^c)&=(a^b) - add $d,$d,$h // d+=h - eor $t3,$t3,$b // Maj(a,b,c) - eor $t1,$T0,$t1,ror#$Sigma0[1] // Sigma0(a) - add $h,$h,$t3 // h+=Maj(a,b,c) - ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round - //add $h,$h,$t1 // h+=Sigma0(a) -___ -$code.=<<___ if ($i>=15); - ror $t0,$e,#$Sigma1[0] - add $h,$h,$t2 // h+=K[i] - ror $T1,@X[($j+1)&15],#$sigma0[0] - and $t1,$f,$e - ror $T2,@X[($j+14)&15],#$sigma1[0] - bic $t2,$g,$e - ror $T0,$a,#$Sigma0[0] - add $h,$h,@X[$i&15] // h+=X[i] - eor $t0,$t0,$e,ror#$Sigma1[1] - eor $T1,$T1,@X[($j+1)&15],ror#$sigma0[1] - orr $t1,$t1,$t2 // Ch(e,f,g) - eor $t2,$a,$b // a^b, b^c in next round - eor $t0,$t0,$e,ror#$Sigma1[2] // Sigma1(e) - eor $T0,$T0,$a,ror#$Sigma0[1] - add $h,$h,$t1 // h+=Ch(e,f,g) - and $t3,$t3,$t2 // (b^c)&=(a^b) - eor $T2,$T2,@X[($j+14)&15],ror#$sigma1[1] - eor $T1,$T1,@X[($j+1)&15],lsr#$sigma0[2] // sigma0(X[i+1]) - add $h,$h,$t0 // h+=Sigma1(e) - eor $t3,$t3,$b // Maj(a,b,c) - eor $t1,$T0,$a,ror#$Sigma0[2] // Sigma0(a) - eor $T2,$T2,@X[($j+14)&15],lsr#$sigma1[2] // sigma1(X[i+14]) - add @X[$j],@X[$j],@X[($j+9)&15] - add $d,$d,$h // d+=h - add $h,$h,$t3 // h+=Maj(a,b,c) - ldr $t3,[$Ktbl],#$SZ // *K++, $t2 in next round - add @X[$j],@X[$j],$T1 - add $h,$h,$t1 // h+=Sigma0(a) - add @X[$j],@X[$j],$T2 -___ - ($t2,$t3)=($t3,$t2); -} - -$code.=<<___; -#ifndef __KERNEL__ -# include "arm_arch.h" -#endif - -.text - -.extern OPENSSL_armcap_P -.globl $func -.type $func,%function -.align 6 -$func: -___ -$code.=<<___ if ($SZ==4); -#ifndef __KERNEL__ -# ifdef __ILP32__ - ldrsw x16,.LOPENSSL_armcap_P -# else - ldr x16,.LOPENSSL_armcap_P -# endif - adr x17,.LOPENSSL_armcap_P - add x16,x16,x17 - ldr w16,[x16] - tst w16,#ARMV8_SHA256 - b.ne .Lv8_entry - tst w16,#ARMV7_NEON - b.ne .Lneon_entry -#endif -___ -$code.=<<___; - stp x29,x30,[sp,#-128]! - add x29,sp,#0 - - stp x19,x20,[sp,#16] - stp x21,x22,[sp,#32] - stp x23,x24,[sp,#48] - stp x25,x26,[sp,#64] - stp x27,x28,[sp,#80] - sub sp,sp,#4*$SZ - - ldp $A,$B,[$ctx] // load context - ldp $C,$D,[$ctx,#2*$SZ] - ldp $E,$F,[$ctx,#4*$SZ] - add $num,$inp,$num,lsl#`log(16*$SZ)/log(2)` // end of input - ldp $G,$H,[$ctx,#6*$SZ] - adr $Ktbl,.LK$BITS - stp $ctx,$num,[x29,#96] - -.Loop: - ldp @X[0],@X[1],[$inp],#2*$SZ - ldr $t2,[$Ktbl],#$SZ // *K++ - eor $t3,$B,$C // magic seed - str $inp,[x29,#112] -___ -for ($i=0;$i<16;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); } -$code.=".Loop_16_xx:\n"; -for (;$i<32;$i++) { &BODY_00_xx($i,@V); unshift(@V,pop(@V)); } -$code.=<<___; - cbnz $t2,.Loop_16_xx - - ldp $ctx,$num,[x29,#96] - ldr $inp,[x29,#112] - sub $Ktbl,$Ktbl,#`$SZ*($rounds+1)` // rewind - - ldp @X[0],@X[1],[$ctx] - ldp @X[2],@X[3],[$ctx,#2*$SZ] - add $inp,$inp,#14*$SZ // advance input pointer - ldp @X[4],@X[5],[$ctx,#4*$SZ] - add $A,$A,@X[0] - ldp @X[6],@X[7],[$ctx,#6*$SZ] - add $B,$B,@X[1] - add $C,$C,@X[2] - add $D,$D,@X[3] - stp $A,$B,[$ctx] - add $E,$E,@X[4] - add $F,$F,@X[5] - stp $C,$D,[$ctx,#2*$SZ] - add $G,$G,@X[6] - add $H,$H,@X[7] - cmp $inp,$num - stp $E,$F,[$ctx,#4*$SZ] - stp $G,$H,[$ctx,#6*$SZ] - b.ne .Loop - - ldp x19,x20,[x29,#16] - add sp,sp,#4*$SZ - ldp x21,x22,[x29,#32] - ldp x23,x24,[x29,#48] - ldp x25,x26,[x29,#64] - ldp x27,x28,[x29,#80] - ldp x29,x30,[sp],#128 - ret -.size $func,.-$func - -.align 6 -.type .LK$BITS,%object -.LK$BITS: -___ -$code.=<<___ if ($SZ==8); - .quad 0x428a2f98d728ae22,0x7137449123ef65cd - .quad 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc - .quad 0x3956c25bf348b538,0x59f111f1b605d019 - .quad 0x923f82a4af194f9b,0xab1c5ed5da6d8118 - .quad 0xd807aa98a3030242,0x12835b0145706fbe - .quad 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 - .quad 0x72be5d74f27b896f,0x80deb1fe3b1696b1 - .quad 0x9bdc06a725c71235,0xc19bf174cf692694 - .quad 0xe49b69c19ef14ad2,0xefbe4786384f25e3 - .quad 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 - .quad 0x2de92c6f592b0275,0x4a7484aa6ea6e483 - .quad 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 - .quad 0x983e5152ee66dfab,0xa831c66d2db43210 - .quad 0xb00327c898fb213f,0xbf597fc7beef0ee4 - .quad 0xc6e00bf33da88fc2,0xd5a79147930aa725 - .quad 0x06ca6351e003826f,0x142929670a0e6e70 - .quad 0x27b70a8546d22ffc,0x2e1b21385c26c926 - .quad 0x4d2c6dfc5ac42aed,0x53380d139d95b3df - .quad 0x650a73548baf63de,0x766a0abb3c77b2a8 - .quad 0x81c2c92e47edaee6,0x92722c851482353b - .quad 0xa2bfe8a14cf10364,0xa81a664bbc423001 - .quad 0xc24b8b70d0f89791,0xc76c51a30654be30 - .quad 0xd192e819d6ef5218,0xd69906245565a910 - .quad 0xf40e35855771202a,0x106aa07032bbd1b8 - .quad 0x19a4c116b8d2d0c8,0x1e376c085141ab53 - .quad 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 - .quad 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb - .quad 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 - .quad 0x748f82ee5defb2fc,0x78a5636f43172f60 - .quad 0x84c87814a1f0ab72,0x8cc702081a6439ec - .quad 0x90befffa23631e28,0xa4506cebde82bde9 - .quad 0xbef9a3f7b2c67915,0xc67178f2e372532b - .quad 0xca273eceea26619c,0xd186b8c721c0c207 - .quad 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 - .quad 0x06f067aa72176fba,0x0a637dc5a2c898a6 - .quad 0x113f9804bef90dae,0x1b710b35131c471b - .quad 0x28db77f523047d84,0x32caab7b40c72493 - .quad 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c - .quad 0x4cc5d4becb3e42b6,0x597f299cfc657e2a - .quad 0x5fcb6fab3ad6faec,0x6c44198c4a475817 - .quad 0 // terminator -___ -$code.=<<___ if ($SZ==4); - .long 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 - .long 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 - .long 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 - .long 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 - .long 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc - .long 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da - .long 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 - .long 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 - .long 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 - .long 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 - .long 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 - .long 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 - .long 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 - .long 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 - .long 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 - .long 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 - .long 0 //terminator -___ -$code.=<<___; -.size .LK$BITS,.-.LK$BITS -#ifndef __KERNEL__ -.align 3 -.LOPENSSL_armcap_P: -# ifdef __ILP32__ - .long OPENSSL_armcap_P-. -# else - .quad OPENSSL_armcap_P-. -# endif -#endif -.asciz "SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>" -.align 2 -___ - -if ($SZ==4) { -my $Ktbl="x3"; - -my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2)); -my @MSG=map("v$_.16b",(4..7)); -my ($W0,$W1)=("v16.4s","v17.4s"); -my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b"); - -$code.=<<___; -#ifndef __KERNEL__ -.type sha256_block_armv8,%function -.align 6 -sha256_block_armv8: -.Lv8_entry: - stp x29,x30,[sp,#-16]! - add x29,sp,#0 - - ld1.32 {$ABCD,$EFGH},[$ctx] - adr $Ktbl,.LK256 - -.Loop_hw: - ld1 {@MSG[0]-@MSG[3]},[$inp],#64 - sub $num,$num,#1 - ld1.32 {$W0},[$Ktbl],#16 - rev32 @MSG[0],@MSG[0] - rev32 @MSG[1],@MSG[1] - rev32 @MSG[2],@MSG[2] - rev32 @MSG[3],@MSG[3] - orr $ABCD_SAVE,$ABCD,$ABCD // offload - orr $EFGH_SAVE,$EFGH,$EFGH -___ -for($i=0;$i<12;$i++) { -$code.=<<___; - ld1.32 {$W1},[$Ktbl],#16 - add.i32 $W0,$W0,@MSG[0] - sha256su0 @MSG[0],@MSG[1] - orr $abcd,$ABCD,$ABCD - sha256h $ABCD,$EFGH,$W0 - sha256h2 $EFGH,$abcd,$W0 - sha256su1 @MSG[0],@MSG[2],@MSG[3] -___ - ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG)); -} -$code.=<<___; - ld1.32 {$W1},[$Ktbl],#16 - add.i32 $W0,$W0,@MSG[0] - orr $abcd,$ABCD,$ABCD - sha256h $ABCD,$EFGH,$W0 - sha256h2 $EFGH,$abcd,$W0 - - ld1.32 {$W0},[$Ktbl],#16 - add.i32 $W1,$W1,@MSG[1] - orr $abcd,$ABCD,$ABCD - sha256h $ABCD,$EFGH,$W1 - sha256h2 $EFGH,$abcd,$W1 - - ld1.32 {$W1},[$Ktbl] - add.i32 $W0,$W0,@MSG[2] - sub $Ktbl,$Ktbl,#$rounds*$SZ-16 // rewind - orr $abcd,$ABCD,$ABCD - sha256h $ABCD,$EFGH,$W0 - sha256h2 $EFGH,$abcd,$W0 - - add.i32 $W1,$W1,@MSG[3] - orr $abcd,$ABCD,$ABCD - sha256h $ABCD,$EFGH,$W1 - sha256h2 $EFGH,$abcd,$W1 - - add.i32 $ABCD,$ABCD,$ABCD_SAVE - add.i32 $EFGH,$EFGH,$EFGH_SAVE - - cbnz $num,.Loop_hw - - st1.32 {$ABCD,$EFGH},[$ctx] - - ldr x29,[sp],#16 - ret -.size sha256_block_armv8,.-sha256_block_armv8 -#endif -___ -} - -if ($SZ==4) { ######################################### NEON stuff # -# You'll surely note a lot of similarities with sha256-armv4 module, -# and of course it's not a coincidence. sha256-armv4 was used as -# initial template, but was adapted for ARMv8 instruction set and -# extensively re-tuned for all-round performance. - -my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10)); -my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15)); -my $Ktbl="x16"; -my $Xfer="x17"; -my @X = map("q$_",(0..3)); -my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19)); -my $j=0; - -sub AUTOLOAD() # thunk [simplified] x86-style perlasm -{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./; - my $arg = pop; - $arg = "#$arg" if ($arg*1 eq $arg); - $code .= "\t$opcode\t".join(',',@_,$arg)."\n"; -} - -sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; } -sub Dlo { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; } -sub Dhi { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; } - -sub Xupdate() -{ use integer; - my $body = shift; - my @insns = (&$body,&$body,&$body,&$body); - my ($a,$b,$c,$d,$e,$f,$g,$h); - - &ext_8 ($T0,@X[0],@X[1],4); # X[1..4] - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &ext_8 ($T3,@X[2],@X[3],4); # X[9..12] - eval(shift(@insns)); - eval(shift(@insns)); - &mov (&Dscalar($T7),&Dhi(@X[3])); # X[14..15] - eval(shift(@insns)); - eval(shift(@insns)); - &ushr_32 ($T2,$T0,$sigma0[0]); - eval(shift(@insns)); - &ushr_32 ($T1,$T0,$sigma0[2]); - eval(shift(@insns)); - &add_32 (@X[0],@X[0],$T3); # X[0..3] += X[9..12] - eval(shift(@insns)); - &sli_32 ($T2,$T0,32-$sigma0[0]); - eval(shift(@insns)); - eval(shift(@insns)); - &ushr_32 ($T3,$T0,$sigma0[1]); - eval(shift(@insns)); - eval(shift(@insns)); - &eor_8 ($T1,$T1,$T2); - eval(shift(@insns)); - eval(shift(@insns)); - &sli_32 ($T3,$T0,32-$sigma0[1]); - eval(shift(@insns)); - eval(shift(@insns)); - &ushr_32 ($T4,$T7,$sigma1[0]); - eval(shift(@insns)); - eval(shift(@insns)); - &eor_8 ($T1,$T1,$T3); # sigma0(X[1..4]) - eval(shift(@insns)); - eval(shift(@insns)); - &sli_32 ($T4,$T7,32-$sigma1[0]); - eval(shift(@insns)); - eval(shift(@insns)); - &ushr_32 ($T5,$T7,$sigma1[2]); - eval(shift(@insns)); - eval(shift(@insns)); - &ushr_32 ($T3,$T7,$sigma1[1]); - eval(shift(@insns)); - eval(shift(@insns)); - &add_32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4]) - eval(shift(@insns)); - eval(shift(@insns)); - &sli_u32 ($T3,$T7,32-$sigma1[1]); - eval(shift(@insns)); - eval(shift(@insns)); - &eor_8 ($T5,$T5,$T4); - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &eor_8 ($T5,$T5,$T3); # sigma1(X[14..15]) - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &add_32 (@X[0],@X[0],$T5); # X[0..1] += sigma1(X[14..15]) - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &ushr_32 ($T6,@X[0],$sigma1[0]); - eval(shift(@insns)); - &ushr_32 ($T7,@X[0],$sigma1[2]); - eval(shift(@insns)); - eval(shift(@insns)); - &sli_32 ($T6,@X[0],32-$sigma1[0]); - eval(shift(@insns)); - &ushr_32 ($T5,@X[0],$sigma1[1]); - eval(shift(@insns)); - eval(shift(@insns)); - &eor_8 ($T7,$T7,$T6); - eval(shift(@insns)); - eval(shift(@insns)); - &sli_32 ($T5,@X[0],32-$sigma1[1]); - eval(shift(@insns)); - eval(shift(@insns)); - &ld1_32 ("{$T0}","[$Ktbl], #16"); - eval(shift(@insns)); - &eor_8 ($T7,$T7,$T5); # sigma1(X[16..17]) - eval(shift(@insns)); - eval(shift(@insns)); - &eor_8 ($T5,$T5,$T5); - eval(shift(@insns)); - eval(shift(@insns)); - &mov (&Dhi($T5), &Dlo($T7)); - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &add_32 (@X[0],@X[0],$T5); # X[2..3] += sigma1(X[16..17]) - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &add_32 ($T0,$T0,@X[0]); - while($#insns>=1) { eval(shift(@insns)); } - &st1_32 ("{$T0}","[$Xfer], #16"); - eval(shift(@insns)); - - push(@X,shift(@X)); # "rotate" X[] -} - -sub Xpreload() -{ use integer; - my $body = shift; - my @insns = (&$body,&$body,&$body,&$body); - my ($a,$b,$c,$d,$e,$f,$g,$h); - - eval(shift(@insns)); - eval(shift(@insns)); - &ld1_8 ("{@X[0]}","[$inp],#16"); - eval(shift(@insns)); - eval(shift(@insns)); - &ld1_32 ("{$T0}","[$Ktbl],#16"); - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &rev32 (@X[0],@X[0]); - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - eval(shift(@insns)); - &add_32 ($T0,$T0,@X[0]); - foreach (@insns) { eval; } # remaining instructions - &st1_32 ("{$T0}","[$Xfer], #16"); - - push(@X,shift(@X)); # "rotate" X[] -} - -sub body_00_15 () { - ( - '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'. - '&add ($h,$h,$t1)', # h+=X[i]+K[i] - '&add ($a,$a,$t4);'. # h+=Sigma0(a) from the past - '&and ($t1,$f,$e)', - '&bic ($t4,$g,$e)', - '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))', - '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past - '&orr ($t1,$t1,$t4)', # Ch(e,f,g) - '&eor ($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e) - '&eor ($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))', - '&add ($h,$h,$t1)', # h+=Ch(e,f,g) - '&ror ($t0,$t0,"#$Sigma1[0]")', - '&eor ($t2,$a,$b)', # a^b, b^c in next round - '&eor ($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a) - '&add ($h,$h,$t0)', # h+=Sigma1(e) - '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'. - '&ldr ($t1,"[$Ktbl]") if ($j==15);'. - '&and ($t3,$t3,$t2)', # (b^c)&=(a^b) - '&ror ($t4,$t4,"#$Sigma0[0]")', - '&add ($d,$d,$h)', # d+=h - '&eor ($t3,$t3,$b)', # Maj(a,b,c) - '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);' - ) -} - -$code.=<<___; -#ifdef __KERNEL__ -.globl sha256_block_neon -#endif -.type sha256_block_neon,%function -.align 4 -sha256_block_neon: -.Lneon_entry: - stp x29, x30, [sp, #-16]! - mov x29, sp - sub sp,sp,#16*4 - - adr $Ktbl,.LK256 - add $num,$inp,$num,lsl#6 // len to point at the end of inp - - ld1.8 {@X[0]},[$inp], #16 - ld1.8 {@X[1]},[$inp], #16 - ld1.8 {@X[2]},[$inp], #16 - ld1.8 {@X[3]},[$inp], #16 - ld1.32 {$T0},[$Ktbl], #16 - ld1.32 {$T1},[$Ktbl], #16 - ld1.32 {$T2},[$Ktbl], #16 - ld1.32 {$T3},[$Ktbl], #16 - rev32 @X[0],@X[0] // yes, even on - rev32 @X[1],@X[1] // big-endian - rev32 @X[2],@X[2] - rev32 @X[3],@X[3] - mov $Xfer,sp - add.32 $T0,$T0,@X[0] - add.32 $T1,$T1,@X[1] - add.32 $T2,$T2,@X[2] - st1.32 {$T0-$T1},[$Xfer], #32 - add.32 $T3,$T3,@X[3] - st1.32 {$T2-$T3},[$Xfer] - sub $Xfer,$Xfer,#32 - - ldp $A,$B,[$ctx] - ldp $C,$D,[$ctx,#8] - ldp $E,$F,[$ctx,#16] - ldp $G,$H,[$ctx,#24] - ldr $t1,[sp,#0] - mov $t2,wzr - eor $t3,$B,$C - mov $t4,wzr - b .L_00_48 - -.align 4 -.L_00_48: -___ - &Xupdate(\&body_00_15); - &Xupdate(\&body_00_15); - &Xupdate(\&body_00_15); - &Xupdate(\&body_00_15); -$code.=<<___; - cmp $t1,#0 // check for K256 terminator - ldr $t1,[sp,#0] - sub $Xfer,$Xfer,#64 - bne .L_00_48 - - sub $Ktbl,$Ktbl,#256 // rewind $Ktbl - cmp $inp,$num - mov $Xfer, #64 - csel $Xfer, $Xfer, xzr, eq - sub $inp,$inp,$Xfer // avoid SEGV - mov $Xfer,sp -___ - &Xpreload(\&body_00_15); - &Xpreload(\&body_00_15); - &Xpreload(\&body_00_15); - &Xpreload(\&body_00_15); -$code.=<<___; - add $A,$A,$t4 // h+=Sigma0(a) from the past - ldp $t0,$t1,[$ctx,#0] - add $A,$A,$t2 // h+=Maj(a,b,c) from the past - ldp $t2,$t3,[$ctx,#8] - add $A,$A,$t0 // accumulate - add $B,$B,$t1 - ldp $t0,$t1,[$ctx,#16] - add $C,$C,$t2 - add $D,$D,$t3 - ldp $t2,$t3,[$ctx,#24] - add $E,$E,$t0 - add $F,$F,$t1 - ldr $t1,[sp,#0] - stp $A,$B,[$ctx,#0] - add $G,$G,$t2 - mov $t2,wzr - stp $C,$D,[$ctx,#8] - add $H,$H,$t3 - stp $E,$F,[$ctx,#16] - eor $t3,$B,$C - stp $G,$H,[$ctx,#24] - mov $t4,wzr - mov $Xfer,sp - b.ne .L_00_48 - - ldr x29,[x29] - add sp,sp,#16*4+16 - ret -.size sha256_block_neon,.-sha256_block_neon -___ -} - -$code.=<<___; -#ifndef __KERNEL__ -.comm OPENSSL_armcap_P,4,4 -#endif -___ - -{ my %opcode = ( - "sha256h" => 0x5e004000, "sha256h2" => 0x5e005000, - "sha256su0" => 0x5e282800, "sha256su1" => 0x5e006000 ); - - sub unsha256 { - my ($mnemonic,$arg)=@_; - - $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o - && - sprintf ".inst\t0x%08x\t//%s %s", - $opcode{$mnemonic}|$1|($2<<5)|($3<<16), - $mnemonic,$arg; - } -} - -open SELF,$0; -while(<SELF>) { - next if (/^#!/); - last if (!s/^#/\/\// and !/^$/); - print; -} -close SELF; - -foreach(split("\n",$code)) { - - s/\`([^\`]*)\`/eval($1)/ge; - - s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge; - - s/\bq([0-9]+)\b/v$1.16b/g; # old->new registers - - s/\.[ui]?8(\s)/$1/; - s/\.\w?32\b// and s/\.16b/\.4s/g; - m/(ld|st)1[^\[]+\[0\]/ and s/\.4s/\.s/g; - - print $_,"\n"; -} - -close STDOUT; diff --git a/arch/arm64/lib/crypto/sha256-ce.S b/arch/arm64/lib/crypto/sha256-ce.S deleted file mode 100644 index f3e21c6d87d2..000000000000 --- a/arch/arm64/lib/crypto/sha256-ce.S +++ /dev/null @@ -1,136 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * sha2-ce-core.S - core SHA-224/SHA-256 transform using v8 Crypto Extensions - * - * Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org> - */ - -#include <linux/linkage.h> -#include <asm/assembler.h> - - .text - .arch armv8-a+crypto - - dga .req q20 - dgav .req v20 - dgb .req q21 - dgbv .req v21 - - t0 .req v22 - t1 .req v23 - - dg0q .req q24 - dg0v .req v24 - dg1q .req q25 - dg1v .req v25 - dg2q .req q26 - dg2v .req v26 - - .macro add_only, ev, rc, s0 - mov dg2v.16b, dg0v.16b - .ifeq \ev - add t1.4s, v\s0\().4s, \rc\().4s - sha256h dg0q, dg1q, t0.4s - sha256h2 dg1q, dg2q, t0.4s - .else - .ifnb \s0 - add t0.4s, v\s0\().4s, \rc\().4s - .endif - sha256h dg0q, dg1q, t1.4s - sha256h2 dg1q, dg2q, t1.4s - .endif - .endm - - .macro add_update, ev, rc, s0, s1, s2, s3 - sha256su0 v\s0\().4s, v\s1\().4s - add_only \ev, \rc, \s1 - sha256su1 v\s0\().4s, v\s2\().4s, v\s3\().4s - .endm - - /* - * The SHA-256 round constants - */ - .section ".rodata", "a" - .align 4 -.Lsha2_rcon: - .word 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5 - .word 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5 - .word 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3 - .word 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174 - .word 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc - .word 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da - .word 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7 - .word 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967 - .word 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13 - .word 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85 - .word 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3 - .word 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070 - .word 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5 - .word 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3 - .word 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208 - .word 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 - - /* - * size_t __sha256_ce_transform(u32 state[SHA256_STATE_WORDS], - * const u8 *data, size_t nblocks); - */ - .text -SYM_FUNC_START(__sha256_ce_transform) - /* load round constants */ - adr_l x8, .Lsha2_rcon - ld1 { v0.4s- v3.4s}, [x8], #64 - ld1 { v4.4s- v7.4s}, [x8], #64 - ld1 { v8.4s-v11.4s}, [x8], #64 - ld1 {v12.4s-v15.4s}, [x8] - - /* load state */ - ld1 {dgav.4s, dgbv.4s}, [x0] - - /* load input */ -0: ld1 {v16.4s-v19.4s}, [x1], #64 - sub x2, x2, #1 - -CPU_LE( rev32 v16.16b, v16.16b ) -CPU_LE( rev32 v17.16b, v17.16b ) -CPU_LE( rev32 v18.16b, v18.16b ) -CPU_LE( rev32 v19.16b, v19.16b ) - - add t0.4s, v16.4s, v0.4s - mov dg0v.16b, dgav.16b - mov dg1v.16b, dgbv.16b - - add_update 0, v1, 16, 17, 18, 19 - add_update 1, v2, 17, 18, 19, 16 - add_update 0, v3, 18, 19, 16, 17 - add_update 1, v4, 19, 16, 17, 18 - - add_update 0, v5, 16, 17, 18, 19 - add_update 1, v6, 17, 18, 19, 16 - add_update 0, v7, 18, 19, 16, 17 - add_update 1, v8, 19, 16, 17, 18 - - add_update 0, v9, 16, 17, 18, 19 - add_update 1, v10, 17, 18, 19, 16 - add_update 0, v11, 18, 19, 16, 17 - add_update 1, v12, 19, 16, 17, 18 - - add_only 0, v13, 17 - add_only 1, v14, 18 - add_only 0, v15, 19 - add_only 1 - - /* update state */ - add dgav.4s, dgav.4s, dg0v.4s - add dgbv.4s, dgbv.4s, dg1v.4s - - /* return early if voluntary preemption is needed */ - cond_yield 1f, x5, x6 - - /* handled all input blocks? */ - cbnz x2, 0b - - /* store new state */ -1: st1 {dgav.4s, dgbv.4s}, [x0] - mov x0, x2 - ret -SYM_FUNC_END(__sha256_ce_transform) diff --git a/arch/arm64/lib/crypto/sha256.c b/arch/arm64/lib/crypto/sha256.c deleted file mode 100644 index bcf7a3adc0c4..000000000000 --- a/arch/arm64/lib/crypto/sha256.c +++ /dev/null @@ -1,75 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * SHA-256 optimized for ARM64 - * - * Copyright 2025 Google LLC - */ -#include <asm/neon.h> -#include <crypto/internal/sha2.h> -#include <linux/kernel.h> -#include <linux/module.h> - -asmlinkage void sha256_blocks_arch(u32 state[SHA256_STATE_WORDS], - const u8 *data, size_t nblocks); -EXPORT_SYMBOL_GPL(sha256_blocks_arch); -asmlinkage void sha256_block_neon(u32 state[SHA256_STATE_WORDS], - const u8 *data, size_t nblocks); -asmlinkage size_t __sha256_ce_transform(u32 state[SHA256_STATE_WORDS], - const u8 *data, size_t nblocks); - -static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); -static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_ce); - -void sha256_blocks_simd(u32 state[SHA256_STATE_WORDS], - const u8 *data, size_t nblocks) -{ - if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && - static_branch_likely(&have_neon)) { - if (static_branch_likely(&have_ce)) { - do { - size_t rem; - - kernel_neon_begin(); - rem = __sha256_ce_transform(state, - data, nblocks); - kernel_neon_end(); - data += (nblocks - rem) * SHA256_BLOCK_SIZE; - nblocks = rem; - } while (nblocks); - } else { - kernel_neon_begin(); - sha256_block_neon(state, data, nblocks); - kernel_neon_end(); - } - } else { - sha256_blocks_arch(state, data, nblocks); - } -} -EXPORT_SYMBOL_GPL(sha256_blocks_simd); - -bool sha256_is_arch_optimized(void) -{ - /* We always can use at least the ARM64 scalar implementation. */ - return true; -} -EXPORT_SYMBOL_GPL(sha256_is_arch_optimized); - -static int __init sha256_arm64_mod_init(void) -{ - if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && - cpu_have_named_feature(ASIMD)) { - static_branch_enable(&have_neon); - if (cpu_have_named_feature(SHA2)) - static_branch_enable(&have_ce); - } - return 0; -} -subsys_initcall(sha256_arm64_mod_init); - -static void __exit sha256_arm64_mod_exit(void) -{ -} -module_exit(sha256_arm64_mod_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("SHA-256 optimized for ARM64"); diff --git a/arch/arm64/tools/syscall_32.tbl b/arch/arm64/tools/syscall_32.tbl index 0765b3a8d6d6..8d9088bc577d 100644 --- a/arch/arm64/tools/syscall_32.tbl +++ b/arch/arm64/tools/syscall_32.tbl @@ -479,3 +479,5 @@ 465 common listxattrat sys_listxattrat 466 common removexattrat sys_removexattrat 467 common open_tree_attr sys_open_tree_attr +468 common file_getattr sys_file_getattr +469 common file_setattr sys_file_setattr |