diff options
Diffstat (limited to 'arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts')
-rw-r--r-- | arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts b/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts new file mode 100644 index 000000000000..fed3d9a384a0 --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Inochi Amaoto <inochiama@gmail.com> + */ + +/dts-v1/; + +#include "sg2044.dtsi" + +/ { + model = "Sophgo SG2044 SRD3-10"; + compatible = "sophgo,srd3-10", "sophgo,sg2044"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&osc { + clock-frequency = <25000000>; +}; + +&emmc { + bus-width = <4>; + no-sdio; + no-sd; + non-removable; + wp-inverted; + status = "okay"; +}; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&porta 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + rx-internal-delay-ps = <2050>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + mcu: syscon@17 { + compatible = "sophgo,sg2044-hwmon-mcu", "sophgo,sg2042-hwmon-mcu"; + reg = <0x17>; + #thermal-sensor-cells = <1>; + }; +}; + +&msi { + status = "okay"; +}; + +&pcie0 { + bus-range = <0x00 0xff>; + linux,pci-domain = <1>; + status = "okay"; +}; + +&pcie1 { + bus-range = <0x00 0xff>; + linux,pci-domain = <0>; + status = "okay"; +}; + +&pcie2 { + bus-range = <0x00 0xff>; + linux,pci-domain = <3>; + status = "okay"; +}; + +&pcie3 { + bus-range = <0x00 0xff>; + linux,pci-domain = <2>; + status = "okay"; +}; + +&pcie4 { + bus-range = <0x00 0xff>; + linux,pci-domain = <4>; + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&sd { + bus-width = <4>; + no-sdio; + no-mmc; + wp-inverted; + status = "okay"; +}; + +&uart0 { + /* for firmware */ + status = "reserved"; +}; + +&uart1 { + status = "okay"; +}; |