diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 719 |
1 files changed, 708 insertions, 11 deletions
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h index 92248224b713..3f2a0ed02c59 100644 --- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h @@ -485,7 +485,19 @@ union replay_debug_flags { */ uint32_t enable_visual_confirm_debug : 1; - uint32_t reserved : 18; + /** + * 0x4000 (bit 14) + * @debug_log_enabled: Debug Log Enabled + */ + uint32_t debug_log_enabled : 1; + + /** + * 0x8000 (bit 15) + * @enable_sub_feature_visual_confirm: Enable Sub Feature Visual Confirm + */ + uint32_t enable_sub_feature_visual_confirm : 1; + + uint32_t reserved : 16; } bitfields; uint32_t u32All; @@ -593,6 +605,104 @@ union replay_hw_flags { uint32_t u32All; }; +/** + * Flags that can be set by driver to change some Panel Replay behaviour. + */ +union pr_debug_flags { + struct { + /** + * 0x1 (bit 0) + * Enable visual confirm in FW. + */ + uint32_t visual_confirm : 1; + + /** + * 0x2 (bit 1) + * @skip_crc: Set if need to skip CRC. + */ + uint32_t skip_crc : 1; + + /** + * 0x4 (bit 2) + * @force_link_power_on: Force disable ALPM control + */ + uint32_t force_link_power_on : 1; + + /** + * 0x8 (bit 3) + * @force_phy_power_on: Force phy power on + */ + uint32_t force_phy_power_on : 1; + + /** + * 0x10 (bit 4) + * @skip_crtc_disabled: CRTC disable skipped + */ + uint32_t skip_crtc_disabled : 1; + + /* + * 0x20 (bit 5) + * @visual_confirm_rate_control: Enable Visual Confirm rate control detection + */ + uint32_t visual_confirm_rate_control : 1; + + uint32_t reserved : 26; + } bitfields; + + uint32_t u32All; +}; + +union pr_hw_flags { + struct { + /** + * @allow_alpm_fw_standby_mode: To indicate whether the + * ALPM FW standby mode is allowed + */ + uint32_t allow_alpm_fw_standby_mode : 1; + + /* + * @dsc_enable_status: DSC enable status in driver + */ + uint32_t dsc_enable_status : 1; + + /** + * @fec_enable_status: receive fec enable/disable status from driver + */ + uint32_t fec_enable_status : 1; + + /* + * @smu_optimizations_en: SMU power optimization. + * Only when active display is Replay capable and display enters Replay. + * Trigger interrupt to SMU to powerup/down. + */ + uint32_t smu_optimizations_en : 1; + + /** + * @phy_power_state: Indicates current phy power state + */ + uint32_t phy_power_state : 1; + + /** + * @link_power_state: Indicates current link power state + */ + uint32_t link_power_state : 1; + /** + * Use TPS3 signal when restore main link. + */ + uint32_t force_wakeup_by_tps3 : 1; + /** + * @is_alpm_initialized: Indicates whether ALPM is initialized + */ + uint32_t is_alpm_initialized : 1; + /** + * @alpm_mode: Indicates ALPM mode selected + */ + uint32_t alpm_mode : 2; + } bitfields; + + uint32_t u32All; +}; + union fw_assisted_mclk_switch_version { struct { uint8_t minor : 5; @@ -617,6 +727,7 @@ struct dmub_feature_caps { uint8_t replay_supported; uint8_t replay_reserved[3]; uint8_t abm_aux_backlight_support; + uint8_t lsdma_support_in_dmu; }; struct dmub_visual_confirm_color { @@ -629,6 +740,112 @@ struct dmub_visual_confirm_color { uint16_t panel_inst; }; +/** + * struct dmub_cursor_offload_pipe_data_dcn30_v1 - DCN30+ per pipe data. + */ +struct dmub_cursor_offload_pipe_data_dcn30_v1 { + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS; + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS_HIGH; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_WIDTH : 16; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_HEIGHT : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_X_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_Y_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_X : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_Y : 16; + uint32_t CURSOR0_0_CURSOR_DST_OFFSET__CURSOR_DST_X_OFFSET : 13; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_ENABLE : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_MODE : 3; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_2X_MAGNIFY : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_PITCH : 2; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_LINES_PER_CHUNK : 5; + uint32_t reserved0[4]; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_ENABLE : 1; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_MODE : 3; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_EXPANSION_MODE : 1; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_ROM_EN : 1; + uint32_t CNVC_CUR0_CURSOR0_COLOR0__CUR0_COLOR0 : 24; + uint32_t CNVC_CUR0_CURSOR0_COLOR1__CUR0_COLOR1 : 24; + uint32_t CNVC_CUR0_CURSOR0_FP_SCALE_BIAS__CUR0_FP_BIAS : 16; + uint32_t CNVC_CUR0_CURSOR0_FP_SCALE_BIAS__CUR0_FP_SCALE, : 16; + uint32_t reserved1[5]; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_DST_Y_OFFSET : 8; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_CHUNK_HDL_ADJUST : 8; + uint32_t reserved2[3]; +}; + +/** + * struct dmub_cursor_offload_pipe_data_dcn401_v1 - DCN401 per pipe data. + */ +struct dmub_cursor_offload_pipe_data_dcn401_v1 { + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS; + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS_HIGH; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_WIDTH : 16; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_HEIGHT : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_X_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_Y_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_X : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_Y : 16; + uint32_t CURSOR0_0_CURSOR_DST_OFFSET__CURSOR_DST_X_OFFSET : 13; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_ENABLE : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_MODE : 3; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_2X_MAGNIFY : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_PITCH : 2; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_LINES_PER_CHUNK : 5; + uint32_t reserved0[4]; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_ENABLE : 1; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_MODE : 3; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_EXPANSION_MODE : 1; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_ROM_EN : 1; + uint32_t CM_CUR0_CURSOR0_COLOR0__CUR0_COLOR0 : 24; + uint32_t CM_CUR0_CURSOR0_COLOR1__CUR0_COLOR1 : 24; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_G_Y__CUR0_FP_BIAS_G_Y : 16; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_G_Y__CUR0_FP_SCALE_G_Y, : 16; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_RB_CRCB__CUR0_FP_BIAS_RB_CRCB : 16; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_RB_CRCB__CUR0_FP_SCALE_RB_CRCB : 16; + uint32_t reserved1[4]; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_DST_Y_OFFSET : 8; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_CHUNK_HDL_ADJUST : 8; + uint32_t HUBP0_DCHUBP_MALL_CONFIG__USE_MALL_FOR_CURSOR : 1; + uint32_t reserved2[3]; +}; + +/** + * struct dmub_cursor_offload_pipe_data_v1 - Per pipe data for cursor offload. + */ +struct dmub_cursor_offload_pipe_data_v1 { + union { + struct dmub_cursor_offload_pipe_data_dcn30_v1 dcn30; /**< DCN30 cursor data. */ + struct dmub_cursor_offload_pipe_data_dcn401_v1 dcn401; /**< DCN401 cursor data. */ + uint8_t payload[96]; /**< Guarantees the cursor pipe data size per-pipe. */ + }; +}; + +/** + * struct dmub_cursor_offload_payload_data_v1 - A payload of stream data. + */ +struct dmub_cursor_offload_payload_data_v1 { + uint32_t write_idx_start; /**< Write index, updated before pipe_data is written. */ + uint32_t write_idx_finish; /**< Write index, updated after pipe_data is written. */ + uint32_t pipe_mask; /**< Mask of pipes to update. */ + uint32_t reserved; /**< Reserved for future use. */ + struct dmub_cursor_offload_pipe_data_v1 pipe_data[6]; /**< Per-pipe cursor data. */ +}; + +/** + * struct dmub_cursor_offload_stream_v1 - Per-stream data for cursor offload. + */ +struct dmub_cursor_offload_stream_v1 { + struct dmub_cursor_offload_payload_data_v1 payloads[4]; /**< A small buffer of cursor payloads. */ + uint32_t write_idx; /**< The index of the last written payload. */ +}; + +/** + * struct dmub_cursor_offload_v1 - Cursor offload feature state. + */ +struct dmub_cursor_offload_v1 { + struct dmub_cursor_offload_stream_v1 offload_streams[6]; /**< Per-stream cursor offload data */ +}; + //============================================================================== //</DMUB_TYPES>================================================================= //============================================================================== @@ -648,7 +865,8 @@ struct dmub_visual_confirm_color { union dmub_fw_meta_feature_bits { struct { uint32_t shared_state_link_detection : 1; /**< 1 supports link detection via shared state */ - uint32_t reserved : 31; + uint32_t cursor_offload_v1_support: 1; /**< 1 supports cursor offload */ + uint32_t reserved : 30; } bits; /**< status bits */ uint32_t all; /**< 32-bit access to status bits */ }; @@ -814,6 +1032,28 @@ enum dmub_ips_comand_type { }; /** + * enum dmub_cursor_offload_comand_type - Cursor offload subcommands. + */ +enum dmub_cursor_offload_comand_type { + /** + * Initializes the cursor offload feature. + */ + DMUB_CMD__CURSOR_OFFLOAD_INIT = 0, + /** + * Enables cursor offloading for a stream and updates the timing parameters. + */ + DMUB_CMD__CURSOR_OFFLOAD_STREAM_ENABLE = 1, + /** + * Disables cursor offloading for a given stream. + */ + DMUB_CMD__CURSOR_OFFLOAD_STREAM_DISABLE = 2, + /** + * Programs the latest data for a given stream. + */ + DMUB_CMD__CURSOR_OFFLOAD_STREAM_PROGRAM = 3, +}; + +/** * union dmub_fw_boot_options - Boot option definitions for SCRATCH14 */ union dmub_fw_boot_options { @@ -844,7 +1084,8 @@ union dmub_fw_boot_options { uint32_t disable_sldo_opt: 1; /**< 1 to disable SLDO optimizations */ uint32_t lower_hbr3_phy_ssc: 1; /**< 1 to lower hbr3 phy ssc to 0.125 percent */ uint32_t override_hbr3_pll_vco: 1; /**< 1 to override the hbr3 pll vco to 0 */ - uint32_t reserved : 5; /**< reserved */ + uint32_t disable_dpia_bw_allocation: 1; /**< 1 to disable the USB4 DPIA BW allocation */ + uint32_t reserved : 4; /**< reserved */ } bits; /**< boot bits */ uint32_t all; /**< 32-bit access to bits */ }; @@ -877,6 +1118,7 @@ enum dmub_shared_state_feature_id { DMUB_SHARED_SHARE_FEATURE__IPS_FW = 1, DMUB_SHARED_SHARE_FEATURE__IPS_DRIVER = 2, DMUB_SHARED_SHARE_FEATURE__DEBUG_SETUP = 3, + DMUB_SHARED_STATE_FEATURE__CURSOR_OFFLOAD_V1 = 4, DMUB_SHARED_STATE_FEATURE__LAST, /* Total number of features. */ }; @@ -958,6 +1200,22 @@ struct dmub_shared_state_ips_driver { }; /* 248-bytes, fixed */ /** + * struct dmub_shared_state_cursor_offload_v1 - Header metadata for cursor offload. + */ +struct dmub_shared_state_cursor_offload_stream_v1 { + uint32_t last_write_idx; /**< Last write index */ + uint8_t reserved[28]; /**< Reserved bytes. */ +}; /* 32-bytes, fixed */ + +/** + * struct dmub_shared_state_cursor_offload_v1 - Header metadata for cursor offload. + */ +struct dmub_shared_state_cursor_offload_v1 { + struct dmub_shared_state_cursor_offload_stream_v1 offload_streams[6]; /**< stream state, 32-bytes each */ + uint8_t reserved[56]; /**< reserved for future use */ +}; /* 248-bytes, fixed */ + +/** * enum dmub_shared_state_feature_common - Generic payload. */ struct dmub_shared_state_feature_common { @@ -983,6 +1241,7 @@ struct dmub_shared_state_feature_block { struct dmub_shared_state_ips_fw ips_fw; /**< IPS firmware state */ struct dmub_shared_state_ips_driver ips_driver; /**< IPS driver state */ struct dmub_shared_state_debug_setup debug_setup; /**< Debug setup */ + struct dmub_shared_state_cursor_offload_v1 cursor_offload_v1; /**< Cursor offload */ } data; /**< Shared state data. */ }; /* 256-bytes, fixed */ @@ -1572,6 +1831,25 @@ enum dmub_cmd_type { */ DMUB_CMD__IPS = 91, + /** + * Command type use for Cursor offload. + */ + DMUB_CMD__CURSOR_OFFLOAD = 92, + + /** + * Command type used for all SMART_POWER_OLED commands. + */ + DMUB_CMD__SMART_POWER_OLED = 93, + + /** + * Command type use for all Panel Replay commands. + */ + DMUB_CMD__PR = 94, + + + /** + * Command type use for VBIOS shared commands. + */ DMUB_CMD__VBIOS = 128, }; @@ -2369,6 +2647,7 @@ struct dmub_cmd_fams2_global_config { union dmub_cmd_fams2_config { struct dmub_cmd_fams2_global_config global; +// coverity[cert_dcl37_c_violation:FALSE] errno.h, stddef.h, stdint.h not included in atombios.h struct dmub_fams2_stream_static_state stream; //v0 union { struct dmub_fams2_cmd_stream_static_base_state base; @@ -3981,6 +4260,33 @@ enum replay_state { }; /** + * Definition of a panel replay state + */ +enum pr_state { + PR_STATE_0 = 0x00, // State 0 steady state + // Pending SDP and Unlock before back to State 0 + PR_STATE_0_PENDING_SDP_AND_UNLOCK = 0x01, + PR_STATE_1 = 0x10, // State 1 + PR_STATE_2 = 0x20, // State 2 steady state + // Pending frame transmission before transition to State 2 + PR_STATE_2_PENDING_FRAME_TRANSMISSION = 0x30, + // Active and Powered Up + PR_STATE_2_POWERED = 0x31, + // Active and Powered Down, but need to blank HUBP after DPG_EN latch + PR_STATE_2_PENDING_HUBP_BLANK = 0x32, + // Active and Pending Power Up + PR_STATE_2_PENDING_POWER_UP = 0x33, + // Active and Powered Up, Pending DPG latch + PR_STATE_2_PENDING_LOCK_FOR_DPG_POWER_ON = 0x34, + // Active and Powered Up, Pending SDP and Unlock + PR_STATE_2_PENDING_SDP_AND_UNLOCK = 0x35, + // Pending transmission of AS SDP for timing sync, but no rfb update + PR_STATE_2_PENDING_AS_SDP = 0x36, + // Invalid + PR_STATE_INVALID = 0xFF, +}; + +/** * Replay command sub-types. */ enum dmub_cmd_replay_type { @@ -4030,6 +4336,25 @@ enum dmub_cmd_replay_type { DMUB_CMD__REPLAY_SET_GENERAL_CMD = 16, }; +/* + * Panel Replay sub-types + */ +enum dmub_cmd_panel_replay_type { + DMUB_CMD__PR_ENABLE = 0, + DMUB_CMD__PR_COPY_SETTINGS = 1, + DMUB_CMD__PR_UPDATE_STATE = 2, + DMUB_CMD__PR_GENERAL_CMD = 3, +}; + +enum dmub_cmd_panel_replay_state_update_subtype { + PR_STATE_UPDATE_COASTING_VTOTAL = 0x1, + PR_STATE_UPDATE_SYNC_MODE = 0x2, +}; + +enum dmub_cmd_panel_replay_general_subtype { + PR_GENERAL_CMD_DEBUG_OPTION = 0x1, +}; + /** * Replay general command sub-types. */ @@ -4045,6 +4370,7 @@ enum dmub_cmd_replay_general_subtype { REPLAY_GENERAL_CMD_DISABLED_DESYNC_ERROR_DETECTION, REPLAY_GENERAL_CMD_UPDATE_ERROR_STATUS, REPLAY_GENERAL_CMD_SET_LOW_RR_ACTIVATE, + REPLAY_GENERAL_CMD_VIDEO_CONFERENCING, }; struct dmub_alpm_auxless_data { @@ -4182,17 +4508,13 @@ struct dmub_cmd_replay_set_version_data { */ uint8_t panel_inst; /** - * PSR version that FW should implement. + * Replay version that FW should implement. */ enum replay_version version; /** - * PSR control version. - */ - uint8_t cmd_version; - /** * Explicit padding to 4 byte boundary. */ - uint8_t pad[2]; + uint8_t pad[3]; }; /** @@ -4238,6 +4560,45 @@ enum replay_enable { }; /** + * Data passed from driver to FW in a DMUB_CMD__SMART_POWER_OLED_ENABLE command. + */ +struct dmub_rb_cmd_smart_power_oled_enable_data { + /** + * SMART_POWER_OLED enable or disable. + */ + uint8_t enable; + /** + * Panel Instance. + * Panel isntance to identify which replay_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + + uint16_t peak_nits; + /** + * OTG HW instance. + */ + uint8_t otg_inst; + /** + * DIG FE HW instance. + */ + uint8_t digfe_inst; + /** + * DIG BE HW instance. + */ + uint8_t digbe_inst; + uint8_t debugcontrol; + /* + * vertical interrupt trigger line + */ + uint32_t triggerline; + + uint16_t fixed_max_cll; + + uint8_t pad[2]; +}; + +/** * Data passed from driver to FW in a DMUB_CMD__REPLAY_ENABLE command. */ struct dmub_rb_cmd_replay_enable_data { @@ -4408,9 +4769,9 @@ struct dmub_cmd_replay_set_coasting_vtotal_data { */ uint16_t coasting_vtotal_high; /** - * Explicit padding to 4 byte boundary. + * frame skip number. */ - uint8_t pad[2]; + uint16_t frame_skip_number; }; /** @@ -4571,6 +4932,58 @@ union dmub_replay_cmd_set { }; /** + * SMART POWER OLED command sub-types. + */ +enum dmub_cmd_smart_power_oled_type { + + /** + * Enable/Disable SMART_POWER_OLED. + */ + DMUB_CMD__SMART_POWER_OLED_ENABLE = 1, + /** + * Get current MaxCLL value if SMART POWER OLED is enabled. + */ + DMUB_CMD__SMART_POWER_OLED_GETMAXCLL = 2, +}; + +/** + * Definition of a DMUB_CMD__SMART_POWER_OLED command. + */ +struct dmub_rb_cmd_smart_power_oled_enable { + /** + * Command header. + */ + struct dmub_cmd_header header; + + struct dmub_rb_cmd_smart_power_oled_enable_data data; +}; + +struct dmub_cmd_smart_power_oled_getmaxcll_input { + uint8_t panel_inst; + uint8_t pad[3]; +}; + +struct dmub_cmd_smart_power_oled_getmaxcll_output { + uint16_t current_max_cll; + uint8_t pad[2]; +}; + +/** + * Definition of a DMUB_CMD__SMART_POWER_OLED command. + */ +struct dmub_rb_cmd_smart_power_oled_getmaxcll { + struct dmub_cmd_header header; /**< Command header */ + /** + * Data passed from driver to FW in a DMUB_CMD__SMART_POWER_OLED_GETMAXCLL command. + */ + union dmub_cmd_smart_power_oled_getmaxcll_data { + struct dmub_cmd_smart_power_oled_getmaxcll_input input; /**< Input */ + struct dmub_cmd_smart_power_oled_getmaxcll_output output; /**< Output */ + uint32_t output_raw; /**< Raw data output */ + } data; +}; + +/** * Set of HW components that can be locked. * * Note: If updating with more HW components, fields @@ -4652,6 +5065,7 @@ enum hw_lock_client { */ HW_LOCK_CLIENT_REPLAY = 4, HW_LOCK_CLIENT_FAMS2 = 5, + HW_LOCK_CLIENT_CURSOR_OFFLOAD = 6, /** * Invalid client. */ @@ -6064,6 +6478,257 @@ struct dmub_rb_cmd_ips_query_residency_info { }; /** + * struct dmub_cmd_cursor_offload_init_data - Payload for cursor offload init command. + */ +struct dmub_cmd_cursor_offload_init_data { + union dmub_addr state_addr; /**< State address for dmub_cursor_offload */ + uint32_t state_size; /**< State size for dmub_cursor_offload */ +}; + +/** + * struct dmub_rb_cmd_cursor_offload_init - Data for initializing cursor offload. + */ +struct dmub_rb_cmd_cursor_offload_init { + struct dmub_cmd_header header; + struct dmub_cmd_cursor_offload_init_data init_data; +}; + +/** + * struct dmub_cmd_cursor_offload_stream_data - Payload for cursor offload stream command. + */ +struct dmub_cmd_cursor_offload_stream_data { + uint32_t otg_inst: 4; /**< OTG instance to control */ + uint32_t reserved: 28; /**< Reserved for future use */ + uint32_t line_time_in_ns; /**< Line time in ns for the OTG */ + uint32_t v_total_max; /**< OTG v_total_max */ +}; + +/** + * struct dmub_rb_cmd_cursor_offload_stream_cntl - Controls a stream for cursor offload. + */ +struct dmub_rb_cmd_cursor_offload_stream_cntl { + struct dmub_cmd_header header; + struct dmub_cmd_cursor_offload_stream_data data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__PR_ENABLE command. + */ +struct dmub_cmd_pr_enable_data { + /** + * Panel Replay enable or disable. + */ + uint8_t enable; + /** + * Panel Instance. + * Panel isntance to identify which replay_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Phy state to enter. + * Values to use are defined in dmub_phy_fsm_state + */ + uint8_t phy_fsm_state; + /** + * Phy rate for DP - RBR/HBR/HBR2/HBR3. + * Set this using enum phy_link_rate. + * This does not support HDMI/DP2 for now. + */ + uint8_t phy_rate; + /** + * @hpo_stream_enc_inst: HPO stream encoder instance + */ + uint8_t hpo_stream_enc_inst; + /** + * @hpo_link_enc_inst: HPO link encoder instance + */ + uint8_t hpo_link_enc_inst; + /** + * @pad: Align structure to 4 byte boundary. + */ + uint8_t pad[2]; +}; + +/** + * Definition of a DMUB_CMD__PR_ENABLE command. + * Panel Replay enable/disable is controlled using action in data. + */ +struct dmub_rb_cmd_pr_enable { + /** + * Command header. + */ + struct dmub_cmd_header header; + + struct dmub_cmd_pr_enable_data data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__PR_COPY_SETTINGS command. + */ +struct dmub_cmd_pr_copy_settings_data { + /** + * Flags that can be set by driver to change some replay behaviour. + */ + union pr_debug_flags debug; + + /** + * @flags: Flags used to determine feature functionality. + */ + union pr_hw_flags flags; + + /** + * DPP HW instance. + */ + uint8_t dpp_inst; + /** + * OTG HW instance. + */ + uint8_t otg_inst; + /** + * DIG FE HW instance. + */ + uint8_t digfe_inst; + /** + * DIG BE HW instance. + */ + uint8_t digbe_inst; + /** + * AUX HW instance. + */ + uint8_t aux_inst; + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Length of each horizontal line in ns. + */ + uint32_t line_time_in_ns; + /** + * PHY instance. + */ + uint8_t dpphy_inst; + /** + * Determines if SMU optimzations are enabled/disabled. + */ + uint8_t smu_optimizations_en; + /* + * Use FSM state for Replay power up/down + */ + uint8_t use_phy_fsm; + /* + * Use FSFT afftet pixel clk + */ + uint32_t pix_clk_100hz; + /* + * Use Original pixel clock + */ + uint32_t sink_pix_clk_100hz; + /** + * Use for AUX-less ALPM LFPS wake operation + */ + struct dmub_alpm_auxless_data auxless_alpm_data; + /** + * @hpo_stream_enc_inst: HPO stream encoder instance + */ + uint8_t hpo_stream_enc_inst; + /** + * @hpo_link_enc_inst: HPO link encoder instance + */ + uint8_t hpo_link_enc_inst; + /** + * @pad: Align structure to 4 byte boundary. + */ + uint8_t pad[2]; +}; + +/** + * Definition of a DMUB_CMD__PR_COPY_SETTINGS command. + */ +struct dmub_rb_cmd_pr_copy_settings { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__PR_COPY_SETTINGS command. + */ + struct dmub_cmd_pr_copy_settings_data data; +}; + +struct dmub_cmd_pr_update_state_data { + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + + uint8_t pad[3]; // align to 4-byte boundary + /* + * Update flags to control the update behavior. + */ + uint32_t update_flag; + /** + * state/data to set. + */ + uint32_t coasting_vtotal; + uint32_t sync_mode; +}; + +struct dmub_cmd_pr_general_cmd_data { + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * subtype: PR general cmd sub type + */ + uint8_t subtype; + + uint8_t pad[2]; + /** + * config data by different subtypes + */ + union { + uint32_t u32All; + } data; +}; + +/** + * Definition of a DMUB_CMD__PR_UPDATE_STATE command. + */ +struct dmub_rb_cmd_pr_update_state { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__PR_UPDATE_STATE command. + */ + struct dmub_cmd_pr_update_state_data data; +}; + +/** + * Definition of a DMUB_CMD__PR_GENERAL_CMD command. + */ +struct dmub_rb_cmd_pr_general_cmd { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__PR_GENERAL_CMD command. + */ + struct dmub_cmd_pr_general_cmd_data data; +}; + +/** * union dmub_rb_cmd - DMUB inbox command. */ union dmub_rb_cmd { @@ -6392,6 +7057,38 @@ union dmub_rb_cmd { struct dmub_rb_cmd_ips_residency_cntl ips_residency_cntl; struct dmub_rb_cmd_ips_query_residency_info ips_query_residency_info; + /** + * Definition of a DMUB_CMD__CURSOR_OFFLOAD_INIT command. + */ + struct dmub_rb_cmd_cursor_offload_init cursor_offload_init; + /** + * Definition of a DMUB_CMD__CURSOR_OFFLOAD control commands. + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_ENABLE + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_DISABLE + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_PROGRAM + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_UPDATE_DRR + */ + struct dmub_rb_cmd_cursor_offload_stream_cntl cursor_offload_stream_ctnl; + /** + * Definition of a DMUB_CMD__SMART_POWER_OLED_ENABLE command. + */ + struct dmub_rb_cmd_smart_power_oled_enable smart_power_oled_enable; + /** + * Definition of a DMUB_CMD__DMUB_CMD__SMART_POWER_OLED_GETMAXCLL command. + */ + struct dmub_rb_cmd_smart_power_oled_getmaxcll smart_power_oled_getmaxcll; + /* + * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. + */ + struct dmub_rb_cmd_pr_copy_settings pr_copy_settings; + /** + * Definition of a DMUB_CMD__REPLAY_ENABLE command. + */ + struct dmub_rb_cmd_pr_enable pr_enable; + + struct dmub_rb_cmd_pr_update_state pr_update_state; + + struct dmub_rb_cmd_pr_general_cmd pr_general_cmd; }; /** |