diff options
Diffstat (limited to 'drivers/hwmon/pmbus')
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 28 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Makefile | 3 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/isl68137.c | 14 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/max17616.c | 73 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/max34440.c | 44 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/mp2925.c | 316 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/mp9945.c | 243 |
7 files changed, 718 insertions, 3 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index da04ff6df28b..f3fb94cebf1a 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -320,6 +320,15 @@ config SENSORS_MAX16601 This driver can also be built as a module. If so, the module will be called max16601. +config SENSORS_MAX17616 + tristate "Analog Devices MAX17616/MAX17616A" + help + If you say yes here you get hardware monitoring support for Analog + Devices MAX17616/MAX17616A. + + This driver can also be built as a module. If so, the module will + be called max17616. + config SENSORS_MAX20730 tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743" help @@ -352,6 +361,7 @@ config SENSORS_MAX34440 help If you say yes here you get hardware monitoring support for Maxim MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461. + Other compatible are ADPM12160, and ADPM12200. This driver can also be built as a module. If so, the module will be called max34440. @@ -401,6 +411,15 @@ config SENSORS_MP2891 This driver can also be built as a module. If so, the module will be called mp2891. +config SENSORS_MP2925 + tristate "MPS MP2925" + help + If you say yes here you get hardware monitoring support for MPS + MP2925 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2925. + config SENSORS_MP29502 tristate "MPS MP29502" help @@ -471,6 +490,15 @@ config SENSORS_MP9941 This driver can also be built as a module. If so, the module will be called mp9941. +config SENSORS_MP9945 + tristate "MPS MP9945" + help + If you say yes here you get hardware monitoring support for MPS + MP9945. + + This driver can also be built as a module. If so, the module will + be called mp9945. + config SENSORS_MPQ7932_REGULATOR bool "Regulator support for MPQ7932" depends on SENSORS_MPQ7932 && REGULATOR diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 4c5ff3f32c5e..349a89b6d92e 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_SENSORS_LTC4286) += ltc4286.o obj-$(CONFIG_SENSORS_MAX15301) += max15301.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX16601) += max16601.o +obj-$(CONFIG_SENSORS_MAX17616) += max17616.o obj-$(CONFIG_SENSORS_MAX20730) += max20730.o obj-$(CONFIG_SENSORS_MAX20751) += max20751.o obj-$(CONFIG_SENSORS_MAX31785) += max31785.o @@ -40,6 +41,7 @@ obj-$(CONFIG_SENSORS_MP2856) += mp2856.o obj-$(CONFIG_SENSORS_MP2869) += mp2869.o obj-$(CONFIG_SENSORS_MP2888) += mp2888.o obj-$(CONFIG_SENSORS_MP2891) += mp2891.o +obj-$(CONFIG_SENSORS_MP2925) += mp2925.o obj-$(CONFIG_SENSORS_MP29502) += mp29502.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o obj-$(CONFIG_SENSORS_MP2993) += mp2993.o @@ -47,6 +49,7 @@ obj-$(CONFIG_SENSORS_MP5023) += mp5023.o obj-$(CONFIG_SENSORS_MP5920) += mp5920.o obj-$(CONFIG_SENSORS_MP5990) += mp5990.o obj-$(CONFIG_SENSORS_MP9941) += mp9941.o +obj-$(CONFIG_SENSORS_MP9945) += mp9945.o obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o obj-$(CONFIG_SENSORS_MPQ8785) += mpq8785.o obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c index 6bba9b50c51b..97b61836f53a 100644 --- a/drivers/hwmon/pmbus/isl68137.c +++ b/drivers/hwmon/pmbus/isl68137.c @@ -65,6 +65,7 @@ enum chips { raa228246, raa229001, raa229004, + raa229141, raa229621, }; @@ -73,6 +74,7 @@ enum variants { raa_dmpvr2_1rail, raa_dmpvr2_2rail, raa_dmpvr2_2rail_nontc, + raa_dmpvr2_2rail_pmbus, raa_dmpvr2_3rail, raa_dmpvr2_hv, }; @@ -399,6 +401,17 @@ static int isl68137_probe(struct i2c_client *client) info->read_word_data = raa_dmpvr2_read_word_data; info->write_word_data = raa_dmpvr2_write_word_data; break; + case raa_dmpvr2_2rail_pmbus: + info->format[PSC_VOLTAGE_IN] = linear, + info->format[PSC_VOLTAGE_OUT] = linear, + info->format[PSC_CURRENT_IN] = linear; + info->format[PSC_CURRENT_OUT] = linear; + info->format[PSC_POWER] = linear; + info->format[PSC_TEMPERATURE] = linear; + info->pages = 2; + info->read_word_data = raa_dmpvr2_read_word_data; + info->write_word_data = raa_dmpvr2_write_word_data; + break; case raa_dmpvr2_3rail: info->read_word_data = raa_dmpvr2_read_word_data; info->write_word_data = raa_dmpvr2_write_word_data; @@ -469,6 +482,7 @@ static const struct i2c_device_id raa_dmpvr_id[] = { {"raa228246", raa_dmpvr2_2rail_nontc}, {"raa229001", raa_dmpvr2_2rail}, {"raa229004", raa_dmpvr2_2rail}, + {"raa229141", raa_dmpvr2_2rail_pmbus}, {"raa229621", raa_dmpvr2_2rail}, {} }; diff --git a/drivers/hwmon/pmbus/max17616.c b/drivers/hwmon/pmbus/max17616.c new file mode 100644 index 000000000000..1d4a0ddb95bb --- /dev/null +++ b/drivers/hwmon/pmbus/max17616.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Hardware monitoring driver for Analog Devices MAX17616/MAX17616A + * + * Copyright (C) 2025 Analog Devices, Inc. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> + +#include "pmbus.h" + +static struct pmbus_driver_info max17616_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = direct, + .m[PSC_VOLTAGE_IN] = 512, + .b[PSC_VOLTAGE_IN] = -18, + .R[PSC_VOLTAGE_IN] = -1, + + .format[PSC_VOLTAGE_OUT] = direct, + .m[PSC_VOLTAGE_OUT] = 512, + .b[PSC_VOLTAGE_OUT] = -18, + .R[PSC_VOLTAGE_OUT] = -1, + + .format[PSC_CURRENT_OUT] = direct, + .m[PSC_CURRENT_OUT] = 5845, + .b[PSC_CURRENT_OUT] = 80, + .R[PSC_CURRENT_OUT] = -1, + + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 71, + .b[PSC_TEMPERATURE] = 19653, + .R[PSC_TEMPERATURE] = -1, + + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_STATUS_TEMP, +}; + +static int max17616_probe(struct i2c_client *client) +{ + return pmbus_do_probe(client, &max17616_info); +} + +static const struct i2c_device_id max17616_id[] = { + { "max17616" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max17616_id); + +static const struct of_device_id max17616_of_match[] = { + { .compatible = "adi,max17616" }, + { } +}; +MODULE_DEVICE_TABLE(of, max17616_of_match); + +static struct i2c_driver max17616_driver = { + .driver = { + .name = "max17616", + .of_match_table = max17616_of_match, + }, + .probe = max17616_probe, + .id_table = max17616_id, +}; +module_i2c_driver(max17616_driver); + +MODULE_AUTHOR("Kim Seer Paller <kimseer.paller@analog.com>"); +MODULE_DESCRIPTION("PMBus driver for Analog Devices MAX17616/MAX17616A"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("PMBUS"); diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c index ef981ed97da8..8ea4e68d4e9d 100644 --- a/drivers/hwmon/pmbus/max34440.c +++ b/drivers/hwmon/pmbus/max34440.c @@ -17,6 +17,7 @@ enum chips { adpm12160, + adpm12200, max34440, max34441, max34446, @@ -98,7 +99,7 @@ static int max34440_read_word_data(struct i2c_client *client, int page, break; case PMBUS_VIRT_READ_IOUT_AVG: if (data->id != max34446 && data->id != max34451 && - data->id != adpm12160) + data->id != adpm12160 && data->id != adpm12200) return -ENXIO; ret = pmbus_read_word_data(client, page, phase, MAX34446_MFR_IOUT_AVG); @@ -183,7 +184,7 @@ static int max34440_write_word_data(struct i2c_client *client, int page, ret = pmbus_write_word_data(client, page, MAX34440_MFR_IOUT_PEAK, 0); if (!ret && (data->id == max34446 || data->id == max34451 || - data->id == adpm12160)) + data->id == adpm12160 || data->id == adpm12200)) ret = pmbus_write_word_data(client, page, MAX34446_MFR_IOUT_AVG, 0); @@ -364,6 +365,42 @@ static struct pmbus_driver_info max34440_info[] = { .read_word_data = max34440_read_word_data, .write_word_data = max34440_write_word_data, }, + [adpm12200] = { + .pages = 19, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_VOLTAGE_IN] = 125, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = 0, + .m[PSC_VOLTAGE_OUT] = 125, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 0, + .m[PSC_CURRENT_IN] = 250, + .b[PSC_CURRENT_IN] = 0, + .R[PSC_CURRENT_IN] = -1, + .m[PSC_CURRENT_OUT] = 250, + .b[PSC_CURRENT_OUT] = 0, + .R[PSC_CURRENT_OUT] = -1, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 0, + .R[PSC_TEMPERATURE] = 2, + /* absent func below [18] are not for monitoring */ + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT, + .func[4] = PMBUS_HAVE_STATUS_IOUT, + .func[5] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[6] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[7] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[8] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + .func[9] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT, + .func[10] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT, + .func[14] = PMBUS_HAVE_IOUT, + .func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, + .read_word_data = max34440_read_word_data, + .write_word_data = max34440_write_word_data, + }, [max34440] = { .pages = 14, .format[PSC_VOLTAGE_IN] = direct, @@ -600,7 +637,7 @@ static int max34440_probe(struct i2c_client *client) rv = max34451_set_supported_funcs(client, data); if (rv) return rv; - } else if (data->id == adpm12160) { + } else if (data->id == adpm12160 || data->id == adpm12200) { data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT; data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT; } @@ -610,6 +647,7 @@ static int max34440_probe(struct i2c_client *client) static const struct i2c_device_id max34440_id[] = { {"adpm12160", adpm12160}, + {"adpm12200", adpm12200}, {"max34440", max34440}, {"max34441", max34441}, {"max34446", max34446}, diff --git a/drivers/hwmon/pmbus/mp2925.c b/drivers/hwmon/pmbus/mp2925.c new file mode 100644 index 000000000000..6bebd6023021 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2925.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2925) + */ + +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +/* + * Vender specific register MFR_VR_MULTI_CONFIG(0x08). + * This register is used to obtain vid scale. + */ +#define MFR_VR_MULTI_CONFIG 0x08 + +#define MP2925_VOUT_DIV 512 +#define MP2925_VOUT_OVUV_UINT 195 +#define MP2925_VOUT_OVUV_DIV 100 + +#define MP2925_PAGE_NUM 2 + +#define MP2925_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +#define MP2925_RAIL2_FUNC (PMBUS_HAVE_PIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +struct mp2925_data { + struct pmbus_driver_info info; + int vout_scale[MP2925_PAGE_NUM]; +}; + +#define to_mp2925_data(x) container_of(x, struct mp2925_data, info) + +static u16 mp2925_linear_exp_transfer(u16 word, u16 expect_exponent) +{ + s16 exponent, mantissa, target_exponent; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + target_exponent = (s16)((expect_exponent & 0x1f) << 11) >> 11; + + if (exponent > target_exponent) + mantissa = mantissa << (exponent - target_exponent); + else + mantissa = mantissa >> (target_exponent - exponent); + + return (mantissa & 0x7ff) | ((expect_exponent << 11) & 0xf800); +} + +static int mp2925_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_MODE: + /* + * The MP2925 does not follow standard PMBus protocol completely, + * and the calculation of vout in this driver is based on direct + * format. As a result, the format of vout is enforced to direct. + */ + ret = PB_VOUT_MODE_DIRECT; + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int mp2925_read_word_data(struct i2c_client *client, int page, int phase, + int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2925_data *data = to_mp2925_data(info); + int ret; + + switch (reg) { + case PMBUS_READ_VOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(11, 0)) * data->vout_scale[page], + MP2925_VOUT_DIV); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(11, 0)) * MP2925_VOUT_OVUV_UINT, + MP2925_VOUT_OVUV_DIV); + break; + case PMBUS_STATUS_WORD: + case PMBUS_READ_VIN: + case PMBUS_READ_IOUT: + case PMBUS_READ_POUT: + case PMBUS_READ_PIN: + case PMBUS_READ_IIN: + case PMBUS_READ_TEMPERATURE_1: + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2925_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + int ret; + + switch (reg) { + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* + * The PMBUS_VIN_OV_FAULT_LIMIT, PMBUS_VIN_OV_WARN_LIMIT, + * PMBUS_VIN_UV_WARN_LIMIT and PMBUS_VIN_UV_FAULT_LIMIT + * of MP2925 is linear11 format, and the exponent is a + * constant value(5'b11100)， so the exponent of word + * parameter should be converted to 5'b11100(0x1C). + */ + ret = pmbus_write_word_data(client, page, reg, + mp2925_linear_exp_transfer(word, 0x1C)); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + /* + * The bit0-bit11 is the limit value, and bit12-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(11, 0)) | + FIELD_PREP(GENMASK(11, 0), + DIV_ROUND_CLOSEST(word * MP2925_VOUT_OVUV_DIV, + MP2925_VOUT_OVUV_UINT))); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT of + * MP2925 is linear11 format, and the exponent is a + * constant value(5'b00000), so the exponent of word + * parameter should be converted to 5'b00000. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2925_linear_exp_transfer(word, 0x00)); + break; + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + /* + * The PMBUS_IOUT_OC_FAULT_LIMIT and PMBUS_IOUT_OC_WARN_LIMIT + * of MP2925 is linear11 format, and the exponent can not be + * changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + mp2925_linear_exp_transfer(word, + FIELD_GET(GENMASK(15, 11), + ret))); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int +mp2925_identify_vout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2925_data *data = to_mp2925_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(5, 5), ret)) { + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, + page == 0 ? 3 : 4); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VR_MULTI_CONFIG); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(5, 5), ret)) + data->vout_scale[page] = 2560; + else + data->vout_scale[page] = 5120; + } else if (FIELD_GET(GENMASK(4, 4), ret)) { + data->vout_scale[page] = 1; + } else { + data->vout_scale[page] = 512; + } + + return 0; +} + +static int mp2925_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + ret = mp2925_identify_vout_scale(client, info, 0); + if (ret < 0) + return ret; + + return mp2925_identify_vout_scale(client, info, 1); +} + +static const struct pmbus_driver_info mp2925_info = { + .pages = MP2925_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .func[0] = MP2925_RAIL1_FUNC, + .func[1] = MP2925_RAIL2_FUNC, + .read_word_data = mp2925_read_word_data, + .read_byte_data = mp2925_read_byte_data, + .write_word_data = mp2925_write_word_data, + .identify = mp2925_identify, +}; + +static int mp2925_probe(struct i2c_client *client) +{ + struct mp2925_data *data; + + data = devm_kzalloc(&client->dev, sizeof(struct mp2925_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp2925_info, sizeof(mp2925_info)); + + return pmbus_do_probe(client, &data->info); +} + +static const struct i2c_device_id mp2925_id[] = { + {"mp2925"}, + {"mp2929"}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2925_id); + +static const struct of_device_id __maybe_unused mp2925_of_match[] = { + {.compatible = "mps,mp2925"}, + {.compatible = "mps,mp2929"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2925_of_match); + +static struct i2c_driver mp2925_driver = { + .driver = { + .name = "mp2925", + .of_match_table = mp2925_of_match, + }, + .probe = mp2925_probe, + .id_table = mp2925_id, +}; + +module_i2c_driver(mp2925_driver); + +MODULE_AUTHOR("Wensheng Wang <wenswang@yeah.net>"); +MODULE_DESCRIPTION("PMBus driver for MPS MP2925"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("PMBUS"); diff --git a/drivers/hwmon/pmbus/mp9945.c b/drivers/hwmon/pmbus/mp9945.c new file mode 100644 index 000000000000..34822e0de812 --- /dev/null +++ b/drivers/hwmon/pmbus/mp9945.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Single-phase Digital VR Controllers(MP9945) + */ + +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +#define MFR_VR_MULTI_CONFIG_R1 0x08 +#define MFR_SVID_CFG_R1 0xBD + +/* VOUT_MODE register values */ +#define VOUT_MODE_LINEAR16 0x17 +#define VOUT_MODE_VID 0x21 +#define VOUT_MODE_DIRECT 0x40 + +#define MP9945_PAGE_NUM 1 + +#define MP9945_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +enum mp9945_vout_mode { + MP9945_VOUT_MODE_VID, + MP9945_VOUT_MODE_DIRECT, + MP9945_VOUT_MODE_LINEAR16, +}; + +struct mp9945_data { + struct pmbus_driver_info info; + enum mp9945_vout_mode vout_mode; + int vid_resolution; + int vid_offset; +}; + +#define to_mp9945_data(x) container_of(x, struct mp9945_data, info) + +static int mp9945_read_vout(struct i2c_client *client, struct mp9945_data *data) +{ + int ret; + + ret = i2c_smbus_read_word_data(client, PMBUS_READ_VOUT); + if (ret < 0) + return ret; + + ret &= GENMASK(11, 0); + + switch (data->vout_mode) { + case MP9945_VOUT_MODE_VID: + if (ret > 0) + ret = (ret + data->vid_offset) * data->vid_resolution; + break; + case MP9945_VOUT_MODE_DIRECT: + break; + case MP9945_VOUT_MODE_LINEAR16: + /* LSB: 1000 * 2^-9 (mV) */ + ret = DIV_ROUND_CLOSEST(ret * 125, 64); + break; + default: + return -ENODEV; + } + + return ret; +} + +static int mp9945_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); + if (ret < 0) + return ret; + + switch (reg) { + case PMBUS_VOUT_MODE: + /* + * Override VOUT_MODE to DIRECT as the driver handles custom + * VOUT format conversions internally. + */ + return PB_VOUT_MODE_DIRECT; + default: + return -ENODATA; + } +} + +static int mp9945_read_word_data(struct i2c_client *client, int page, int phase, + int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp9945_data *data = to_mp9945_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); + if (ret < 0) + return ret; + + switch (reg) { + case PMBUS_READ_VOUT: + ret = mp9945_read_vout(client, data); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = i2c_smbus_read_word_data(client, reg); + if (ret < 0) + return ret; + + /* LSB: 1.95 (mV) */ + ret = DIV_ROUND_CLOSEST((ret & GENMASK(11, 0)) * 39, 20); + break; + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = i2c_smbus_read_word_data(client, reg); + if (ret < 0) + return ret; + + ret &= GENMASK(9, 0); + if (ret > 0) + ret = (ret + data->vid_offset) * data->vid_resolution; + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int mp9945_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + struct mp9945_data *data = to_mp9945_data(info); + int ret; + + ret = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE); + if (ret < 0) + return ret; + + switch (ret) { + case VOUT_MODE_LINEAR16: + data->vout_mode = MP9945_VOUT_MODE_LINEAR16; + break; + case VOUT_MODE_VID: + data->vout_mode = MP9945_VOUT_MODE_VID; + break; + case VOUT_MODE_DIRECT: + data->vout_mode = MP9945_VOUT_MODE_DIRECT; + break; + default: + return -ENODEV; + } + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 3); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VR_MULTI_CONFIG_R1); + if (ret < 0) + return ret; + + data->vid_resolution = (FIELD_GET(BIT(2), ret)) ? 5 : 10; + + ret = i2c_smbus_read_word_data(client, MFR_SVID_CFG_R1); + if (ret < 0) + return ret; + + data->vid_offset = (FIELD_GET(BIT(15), ret)) ? 19 : 49; + + return i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); +} + +static struct pmbus_driver_info mp9945_info = { + .pages = MP9945_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .format[PSC_TEMPERATURE] = linear, + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + .func[0] = MP9945_RAIL1_FUNC, + .read_word_data = mp9945_read_word_data, + .read_byte_data = mp9945_read_byte_data, + .identify = mp9945_identify, +}; + +static int mp9945_probe(struct i2c_client *client) +{ + struct mp9945_data *data; + int ret; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp9945_info, sizeof(mp9945_info)); + + /* + * Set page 0 before probe. The core reads paged registers which are + * only on page 0 for this device. + */ + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0); + if (ret < 0) + return ret; + + return pmbus_do_probe(client, &data->info); +} + +static const struct i2c_device_id mp9945_id[] = { + {"mp9945"}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp9945_id); + +static const struct of_device_id __maybe_unused mp9945_of_match[] = { + {.compatible = "mps,mp9945"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp9945_of_match); + +static struct i2c_driver mp9945_driver = { + .driver = { + .name = "mp9945", + .of_match_table = of_match_ptr(mp9945_of_match), + }, + .probe = mp9945_probe, + .id_table = mp9945_id, +}; + +module_i2c_driver(mp9945_driver); + +MODULE_AUTHOR("Cosmo Chou <chou.cosmo@gmail.com>"); +MODULE_DESCRIPTION("PMBus driver for MPS MP9945"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("PMBUS"); |