1 files changed, 45 insertions, 6 deletions

diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index c4edf8355941..564ca6a61985 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -438,14 +438,21 @@ static void carl9170_usb_rx_complete(struct urb *urb)
 
 		if (atomic_read(&ar->rx_anch_urbs) == 0) {
 			/*
-			 * The system is too slow to cope with
-			 * the enormous workload. We have simply
-			 * run out of active rx urbs and this
-			 * unfortunately leads to an unpredictable
-			 * device.
+			 * At this point, either the system is too slow to
+			 * cope with the enormous workload (so we have simply
+			 * run out of active rx urbs and this unfortunately
+			 * leads to an unpredictable device), or the device
+			 * is not fully functional after an unsuccessful
+			 * firmware loading attempts (so it doesn't pass
+			 * ieee80211_register_hw() and there is no internal
+			 * workqueue at all).
 			 */
 
-			ieee80211_queue_work(ar->hw, &ar->ping_work);
+			if (ar->registered)
+				ieee80211_queue_work(ar->hw, &ar->ping_work);
+			else
+				pr_warn_once("device %s is not registered\n",
+					     dev_name(&ar->udev->dev));
 		}
 	} else {
 		/*
@@ -1069,6 +1076,38 @@ static int carl9170_usb_probe(struct usb_interface *intf,
 			ar->usb_ep_cmd_is_bulk = true;
 	}
 
+	/* Verify that all expected endpoints are present */
+	if (ar->usb_ep_cmd_is_bulk) {
+		u8 bulk_ep_addr[] = {
+			AR9170_USB_EP_RX | USB_DIR_IN,
+			AR9170_USB_EP_TX | USB_DIR_OUT,
+			AR9170_USB_EP_CMD | USB_DIR_OUT,
+			0};
+		u8 int_ep_addr[] = {
+			AR9170_USB_EP_IRQ | USB_DIR_IN,
+			0};
+		if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
+		    !usb_check_int_endpoints(intf, int_ep_addr))
+			err = -ENODEV;
+	} else {
+		u8 bulk_ep_addr[] = {
+			AR9170_USB_EP_RX | USB_DIR_IN,
+			AR9170_USB_EP_TX | USB_DIR_OUT,
+			0};
+		u8 int_ep_addr[] = {
+			AR9170_USB_EP_IRQ | USB_DIR_IN,
+			AR9170_USB_EP_CMD | USB_DIR_OUT,
+			0};
+		if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
+		    !usb_check_int_endpoints(intf, int_ep_addr))
+			err = -ENODEV;
+	}
+
+	if (err) {
+		carl9170_free(ar);
+		return err;
+	}
+
 	usb_set_intfdata(intf, ar);
 	SET_IEEE80211_DEV(ar->hw, &intf->dev);