diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h | 134 |
1 files changed, 7 insertions, 127 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h b/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h index e90f3187e55c..4644fc1aa1ec 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/nvm-reg.h @@ -18,13 +18,8 @@ enum iwl_regulatory_and_nvm_subcmd_ids { /** * @LARI_CONFIG_CHANGE: &struct iwl_lari_config_change_cmd_v1, - * &struct iwl_lari_config_change_cmd_v2, - * &struct iwl_lari_config_change_cmd_v3, - * &struct iwl_lari_config_change_cmd_v4, - * &struct iwl_lari_config_change_cmd_v5, * &struct iwl_lari_config_change_cmd_v6, - * &struct iwl_lari_config_change_cmd_v7, - * &struct iwl_lari_config_change_cmd_v10 or + * &struct iwl_lari_config_change_cmd_v8, * &struct iwl_lari_config_change_cmd */ LARI_CONFIG_CHANGE = 0x1, @@ -565,74 +560,6 @@ struct iwl_lari_config_change_cmd_v1 { } __packed; /* LARI_CHANGE_CONF_CMD_S_VER_1 */ /** - * struct iwl_lari_config_change_cmd_v2 - change LARI configuration - * @config_bitmap: bit map of the config commands. each bit will trigger a - * different predefined FW config operation - * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets - */ -struct iwl_lari_config_change_cmd_v2 { - __le32 config_bitmap; - __le32 oem_uhb_allow_bitmap; -} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_2 */ - -/** - * struct iwl_lari_config_change_cmd_v3 - change LARI configuration - * @config_bitmap: bit map of the config commands. each bit will trigger a - * different predefined FW config operation - * @oem_uhb_allow_bitmap: bitmap of UHB enabled MCC sets - * @oem_11ax_allow_bitmap: bitmap of 11ax allowed MCCs. - * For each supported country, a pair of regulatory override bit and 11ax mode exist - * in the bit field. - */ -struct iwl_lari_config_change_cmd_v3 { - __le32 config_bitmap; - __le32 oem_uhb_allow_bitmap; - __le32 oem_11ax_allow_bitmap; -} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_3 */ - -/** - * struct iwl_lari_config_change_cmd_v4 - change LARI configuration - * @config_bitmap: Bitmap of the config commands. Each bit will trigger a - * different predefined FW config operation. - * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. - * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits - * per country, one to indicate whether to override and the other to - * indicate the value to use. - * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits - * per country, one to indicate whether to override and the other to - * indicate allow/disallow unii4 channels. - */ -struct iwl_lari_config_change_cmd_v4 { - __le32 config_bitmap; - __le32 oem_uhb_allow_bitmap; - __le32 oem_11ax_allow_bitmap; - __le32 oem_unii4_allow_bitmap; -} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_4 */ - -/** - * struct iwl_lari_config_change_cmd_v5 - change LARI configuration - * @config_bitmap: Bitmap of the config commands. Each bit will trigger a - * different predefined FW config operation. - * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. - * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits - * per country, one to indicate whether to override and the other to - * indicate the value to use. - * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits - * per country, one to indicate whether to override and the other to - * indicate allow/disallow unii4 channels. - * @chan_state_active_bitmap: Bitmap for overriding channel state to active. - * Each bit represents a country or region to activate, according to the BIOS - * definitions. - */ -struct iwl_lari_config_change_cmd_v5 { - __le32 config_bitmap; - __le32 oem_uhb_allow_bitmap; - __le32 oem_11ax_allow_bitmap; - __le32 oem_unii4_allow_bitmap; - __le32 chan_state_active_bitmap; -} __packed; /* LARI_CHANGE_CONF_CMD_S_VER_5 */ - -/** * struct iwl_lari_config_change_cmd_v6 - change LARI configuration * @config_bitmap: Bitmap of the config commands. Each bit will trigger a * different predefined FW config operation. @@ -659,8 +586,7 @@ struct iwl_lari_config_change_cmd_v6 { } __packed; /* LARI_CHANGE_CONF_CMD_S_VER_6 */ /** - * struct iwl_lari_config_change_cmd_v7 - change LARI configuration - * This structure is used also for lari cmd version 8 and 9. + * struct iwl_lari_config_change_cmd_v8 - change LARI configuration * @config_bitmap: Bitmap of the config commands. Each bit will trigger a * different predefined FW config operation. * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. @@ -670,21 +596,19 @@ struct iwl_lari_config_change_cmd_v6 { * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits * per country, one to indicate whether to override and the other to * indicate allow/disallow unii4 channels. - * For LARI cmd version 4 to 8 - bits 0:3 are supported. - * For LARI cmd version 9 - bits 0:5 are supported. + * bit 0 - 3: supported. * @chan_state_active_bitmap: Bitmap to enable different bands per country * or region. * Each bit represents a country or region, and a band to activate * according to the BIOS definitions. - * For LARI cmd version 7 - bits 0:3 are supported. - * For LARI cmd version 8 - bits 0:4 are supported. + * bit 0 - 4: supported. * @force_disable_channels_bitmap: Bitmap of disabled bands/channels. * Each bit represents a set of channels in a specific band that should be * disabled * @edt_bitmap: Bitmap of energy detection threshold table. * Disable/enable the EDT optimization method for different band. */ -struct iwl_lari_config_change_cmd_v7 { +struct iwl_lari_config_change_cmd_v8 { __le32 config_bitmap; __le32 oem_uhb_allow_bitmap; __le32 oem_11ax_allow_bitmap; @@ -693,48 +617,8 @@ struct iwl_lari_config_change_cmd_v7 { __le32 force_disable_channels_bitmap; __le32 edt_bitmap; } __packed; -/* LARI_CHANGE_CONF_CMD_S_VER_7 */ /* LARI_CHANGE_CONF_CMD_S_VER_8 */ -/* LARI_CHANGE_CONF_CMD_S_VER_9 */ -/** - * struct iwl_lari_config_change_cmd_v10 - change LARI configuration - * @config_bitmap: Bitmap of the config commands. Each bit will trigger a - * different predefined FW config operation. - * @oem_uhb_allow_bitmap: Bitmap of UHB enabled MCC sets. - * @oem_11ax_allow_bitmap: Bitmap of 11ax allowed MCCs. There are two bits - * per country, one to indicate whether to override and the other to - * indicate the value to use. - * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits - * per country, one to indicate whether to override and the other to - * indicate allow/disallow unii4 channels. - * For LARI cmd version 10 - bits 0:5 are supported. - * @chan_state_active_bitmap: Bitmap to enable different bands per country - * or region. - * Each bit represents a country or region, and a band to activate - * according to the BIOS definitions. - * For LARI cmd version 10 - bits 0:4 are supported. - * @force_disable_channels_bitmap: Bitmap of disabled bands/channels. - * Each bit represents a set of channels in a specific band that should be - * disabled - * @edt_bitmap: Bitmap of energy detection threshold table. - * Disable/enable the EDT optimization method for different band. - * @oem_320mhz_allow_bitmap: 320Mhz bandwidth enablement bitmap per MCC. - * bit0: enable 320Mhz in Japan. - * bit1: enable 320Mhz in South Korea. - * bit 2 - 31: reserved. - */ -struct iwl_lari_config_change_cmd_v10 { - __le32 config_bitmap; - __le32 oem_uhb_allow_bitmap; - __le32 oem_11ax_allow_bitmap; - __le32 oem_unii4_allow_bitmap; - __le32 chan_state_active_bitmap; - __le32 force_disable_channels_bitmap; - __le32 edt_bitmap; - __le32 oem_320mhz_allow_bitmap; -} __packed; -/* LARI_CHANGE_CONF_CMD_S_VER_10 */ /** * struct iwl_lari_config_change_cmd - change LARI configuration @@ -747,14 +631,11 @@ struct iwl_lari_config_change_cmd_v10 { * @oem_unii4_allow_bitmap: Bitmap of unii4 allowed MCCs.There are two bits * per country, one to indicate whether to override and the other to * indicate allow/disallow unii4 channels. - * For LARI cmd version 11 - bits 0:5 are supported. * @chan_state_active_bitmap: Bitmap to enable different bands per country * or region. * Each bit represents a country or region, and a band to activate * according to the BIOS definitions. - * For LARI cmd version 11 - bits 0:4 are supported. - * For LARI cmd version 12 - bits 0:6 are supported and bits 7:31 are - * reserved. + * bit 0 - 6: supported. * @force_disable_channels_bitmap: Bitmap of disabled bands/channels. * Each bit represents a set of channels in a specific band that should be * disabled @@ -781,12 +662,11 @@ struct iwl_lari_config_change_cmd { __le32 oem_320mhz_allow_bitmap; __le32 oem_11be_allow_bitmap; } __packed; -/* LARI_CHANGE_CONF_CMD_S_VER_11 */ /* LARI_CHANGE_CONF_CMD_S_VER_12 */ /* Activate UNII-1 (5.2GHz) for World Wide */ #define ACTIVATE_5G2_IN_WW_MASK BIT(4) -#define CHAN_STATE_ACTIVE_BITMAP_CMD_V11 0x1F +#define CHAN_STATE_ACTIVE_BITMAP_CMD_V8 0x1F #define CHAN_STATE_ACTIVE_BITMAP_CMD_V12 0x7F /** |