diff options
Diffstat (limited to 'drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c')
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 79 |
1 files changed, 76 insertions, 3 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c index 4c10cafded4e..8a5ed50f2da0 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -43,6 +43,8 @@ #define USB_CTRL_SETUP_tca_drv_sel_MASK BIT(24) #define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK BIT(25) #define USB_CTRL_USB_PM 0x04 +#define USB_CTRL_USB_PM_REF_S2_CLK_SWITCH_EN_MASK BIT(1) +#define USB_CTRL_USB_PM_UTMI_S2_CLK_SWITCH_EN_MASK BIT(2) #define USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK BIT(3) #define USB_CTRL_USB_PM_XHC_PME_EN_MASK BIT(4) #define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK BIT(22) @@ -61,6 +63,13 @@ #define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK BIT(18) #define USB_CTRL_P0_U2PHY_CFG1 0x68 #define USB_CTRL_P0_U2PHY_CFG1_COMMONONN_MASK BIT(10) +#define USB_CTRL_P0_U2PHY_CFG2 0x6c +#define USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_MASK GENMASK(20, 17) +#define USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_SHIFT 17 +#define USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_MASK GENMASK(24, 23) +#define USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_SHIFT 23 +#define USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_MASK GENMASK(26, 25) +#define USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_SHIFT 25 /* Register definitions for the USB_PHY block in 7211b0 */ #define USB_PHY_PLL_CTL 0x00 @@ -153,7 +162,9 @@ static void xhci_soft_reset(struct brcm_usb_init_params *params, } else { USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB); /* Required for COMMONONN to be set */ - USB_XHCI_GBL_UNSET(xhci_gbl, GUSB2PHYCFG, U2_FREECLK_EXISTS); + if (params->supported_port_modes != USB_CTLR_MODE_DRD) + USB_XHCI_GBL_UNSET(xhci_gbl, GUSB2PHYCFG, + U2_FREECLK_EXISTS); } } @@ -323,13 +334,23 @@ static void usb_init_common_7216(struct brcm_usb_init_params *params) void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; USB_CTRL_UNSET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN); + + /* + * The PHY might be in a bad state if it is already powered + * up. Toggle the power just in case. + */ + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); /* 1 millisecond - for USB clocks to settle down */ usleep_range(1000, 2000); - /* Disable PHY when port is suspended */ - USB_CTRL_SET(ctrl, P0_U2PHY_CFG1, COMMONONN); + /* + * Disable PHY when port is suspended + * Does not work in DRD mode + */ + if (params->supported_port_modes != USB_CTLR_MODE_DRD) + USB_CTRL_SET(ctrl, P0_U2PHY_CFG1, COMMONONN); usb_wake_enable_7216(params, false); usb_init_common(params); @@ -357,6 +378,42 @@ static void usb_uninit_common_7216(struct brcm_usb_init_params *params) } } +static void usb_init_common_74110(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM)); + reg &= ~(USB_CTRL_MASK(USB_PM, REF_S2_CLK_SWITCH_EN) | + USB_CTRL_MASK(USB_PM, UTMI_S2_CLK_SWITCH_EN)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM)); + + usb_init_common_7216(params); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, P0_U2PHY_CFG2)); + reg &= ~(USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_MASK | + USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_MASK | + USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_MASK); + reg |= (0x6 << USB_CTRL_P0_U2PHY_CFG2_TXVREFTUNE0_SHIFT) | + (0x3 << USB_CTRL_P0_U2PHY_CFG2_TXRESTUNE0_SHIFT) | + (0x2 << USB_CTRL_P0_U2PHY_CFG2_TXPREEMPAMPTUNE0_SHIFT); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, P0_U2PHY_CFG2)); +} + +static void usb_uninit_common_74110(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + if (params->wake_enabled) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM)); + reg |= (USB_CTRL_MASK(USB_PM, REF_S2_CLK_SWITCH_EN) | + USB_CTRL_MASK(USB_PM, UTMI_S2_CLK_SWITCH_EN)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM)); + } + usb_uninit_common_7216(params); +} + static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params) { void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; @@ -414,6 +471,16 @@ static void usb_set_dual_select(struct brcm_usb_init_params *params) brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); } +static const struct brcm_usb_init_ops bcm74110_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_74110, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common_74110, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + static const struct brcm_usb_init_ops bcm7216_ops = { .init_ipp = usb_init_ipp, .init_common = usb_init_common_7216, @@ -434,6 +501,12 @@ static const struct brcm_usb_init_ops bcm7211b0_ops = { .set_dual_select = usb_set_dual_select, }; +void brcm_usb_dvr_init_74110(struct brcm_usb_init_params *params) +{ + params->family_name = "74110"; + params->ops = &bcm74110_ops; +} + void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) { |