summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig4
-rw-r--r--drivers/spi/spi-amlogic-spifc-a1.c4
-rw-r--r--drivers/spi/spi-bcm63xx.c14
-rw-r--r--drivers/spi/spi-cadence-quadspi.c18
-rw-r--r--drivers/spi/spi-fsl-lpspi.c8
-rw-r--r--drivers/spi/spi-imx.c15
-rw-r--r--drivers/spi/spi-nxp-fspi.c10
-rw-r--r--drivers/spi/spi-xilinx.c2
-rw-r--r--drivers/spi/spi.c12
9 files changed, 63 insertions, 24 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4d8f00c850c1..55675750182e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -1181,10 +1181,10 @@ config SPI_TEGRA210_QUAD
config SPI_TEGRA114
tristate "NVIDIA Tegra114 SPI Controller"
- depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+ depends on ARCH_TEGRA || COMPILE_TEST
depends on RESET_CONTROLLER
help
- SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
+ SPI controller driver for NVIDIA Tegra114 and later SoCs. This controller
is different than the older SoCs SPI controller and also register interface
get changed with this controller.
diff --git a/drivers/spi/spi-amlogic-spifc-a1.c b/drivers/spi/spi-amlogic-spifc-a1.c
index 18c9aa2cbc29..eb503790017b 100644
--- a/drivers/spi/spi-amlogic-spifc-a1.c
+++ b/drivers/spi/spi-amlogic-spifc-a1.c
@@ -353,7 +353,9 @@ static int amlogic_spifc_a1_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(spifc->dev, 500);
pm_runtime_use_autosuspend(spifc->dev);
- devm_pm_runtime_enable(spifc->dev);
+ ret = devm_pm_runtime_enable(spifc->dev);
+ if (ret)
+ return ret;
ctrl->num_chipselect = 1;
ctrl->dev.of_node = pdev->dev.of_node;
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index b56210734caa..2e3c62f12bef 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -247,6 +247,20 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
if (t->rx_buf) {
do_rx = true;
+
+ /*
+ * In certain hardware implementations, there appears to be a
+ * hidden accumulator that tracks the number of bytes written into
+ * the hardware FIFO, and this accumulator overrides the length in
+ * the SPI_MSG_CTL register.
+ *
+ * Therefore, for read-only transfers, we need to write some dummy
+ * value into the FIFO to keep the accumulator tracking the correct
+ * length.
+ */
+ if (!t->tx_buf)
+ memset_io(bs->tx_io + len, 0xFF, t->len);
+
/* prepend is half-duplex write only */
if (t == first)
prepend_len = 0;
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 81017402bc56..af6d050da1c8 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1981,6 +1981,13 @@ static int cqspi_probe(struct platform_device *pdev)
cqspi->current_cs = -1;
cqspi->sclk = 0;
+ if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM))) {
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, CQSPI_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_get_noresume(dev);
+ }
+
ret = cqspi_setup_flash(cqspi);
if (ret) {
dev_err(dev, "failed to setup flash parameters %d\n", ret);
@@ -1995,14 +2002,7 @@ static int cqspi_probe(struct platform_device *pdev)
if (cqspi->use_direct_mode) {
ret = cqspi_request_mmap_dma(cqspi);
if (ret == -EPROBE_DEFER)
- goto probe_dma_failed;
- }
-
- if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM))) {
- pm_runtime_enable(dev);
- pm_runtime_set_autosuspend_delay(dev, CQSPI_AUTOSUSPEND_TIMEOUT);
- pm_runtime_use_autosuspend(dev);
- pm_runtime_get_noresume(dev);
+ goto probe_setup_failed;
}
ret = spi_register_controller(host);
@@ -2012,7 +2012,6 @@ static int cqspi_probe(struct platform_device *pdev)
}
if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM))) {
- pm_runtime_put_autosuspend(dev);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
@@ -2021,7 +2020,6 @@ static int cqspi_probe(struct platform_device *pdev)
probe_setup_failed:
if (!(ddata && (ddata->quirks & CQSPI_DISABLE_RUNTIME_PM)))
pm_runtime_disable(dev);
-probe_dma_failed:
cqspi_controller_enable(cqspi, 0);
probe_reset_failed:
if (cqspi->is_jh7110)
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 8da66e101386..065456aba2ae 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -486,7 +486,13 @@ static int fsl_lpspi_setup_transfer(struct spi_controller *controller,
fsl_lpspi->tx = fsl_lpspi_buf_tx_u32;
}
- fsl_lpspi->watermark = min_t(typeof(fsl_lpspi->watermark),
+ /*
+ * t->len is 'unsigned' and txfifosize and watermrk is 'u8', force
+ * type cast is inevitable. When len > 255, len will be truncated in min_t(),
+ * it caused wrong watermark set. 'unsigned int' is as the designated type
+ * for min_t() to avoid truncation.
+ */
+ fsl_lpspi->watermark = min_t(unsigned int,
fsl_lpspi->txfifosize,
t->len);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 155ddeb8fcd4..bbf1fd4fe1e9 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -519,9 +519,15 @@ static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx)
{
u32 reg;
- reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
- reg |= MX51_ECSPI_CTRL_XCH;
- writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
+ if (spi_imx->usedma) {
+ reg = readl(spi_imx->base + MX51_ECSPI_DMA);
+ reg |= MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN;
+ writel(reg, spi_imx->base + MX51_ECSPI_DMA);
+ } else {
+ reg = readl(spi_imx->base + MX51_ECSPI_CTRL);
+ reg |= MX51_ECSPI_CTRL_XCH;
+ writel(reg, spi_imx->base + MX51_ECSPI_CTRL);
+ }
}
static void mx51_ecspi_disable(struct spi_imx_data *spi_imx)
@@ -759,7 +765,6 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
MX51_ECSPI_DMA_TX_WML(tx_wml) |
MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
- MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
}
@@ -1520,6 +1525,8 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
reinit_completion(&spi_imx->dma_tx_completion);
dma_async_issue_pending(controller->dma_tx);
+ spi_imx->devtype_data->trigger(spi_imx);
+
transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
/* Wait SDMA to finish the data transfer.*/
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index b6c79e50d842..50a7e4916a60 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -1287,7 +1287,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
{
struct spi_controller *ctlr;
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
struct resource *res;
struct nxp_fspi *f;
int ret, irq;
@@ -1309,7 +1309,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, f);
/* find the resources - configuration register address space */
- if (is_acpi_node(dev_fwnode(f->dev)))
+ if (is_acpi_node(fwnode))
f->iobase = devm_platform_ioremap_resource(pdev, 0);
else
f->iobase = devm_platform_ioremap_resource_byname(pdev, "fspi_base");
@@ -1317,7 +1317,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
return PTR_ERR(f->iobase);
/* find the resources - controller memory mapped space */
- if (is_acpi_node(dev_fwnode(f->dev)))
+ if (is_acpi_node(fwnode))
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
else
res = platform_get_resource_byname(pdev,
@@ -1330,7 +1330,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
f->memmap_phy_size = resource_size(res);
/* find the clocks */
- if (dev_of_node(&pdev->dev)) {
+ if (is_of_node(fwnode)) {
f->clk_en = devm_clk_get(dev, "fspi_en");
if (IS_ERR(f->clk_en))
return PTR_ERR(f->clk_en);
@@ -1383,7 +1383,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
else
ctlr->mem_caps = &nxp_fspi_mem_caps;
- ctlr->dev.of_node = np;
+ device_set_node(&ctlr->dev, fwnode);
ret = devm_add_action_or_reset(dev, nxp_fspi_cleanup, f);
if (ret)
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index d59cc8a18484..c86dc56f38b4 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -300,7 +300,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
/* Read out all the data from the Rx FIFO */
rx_words = n_words;
- stalled = 10;
+ stalled = 32;
while (rx_words) {
if (rx_words == n_words && !(stalled--) &&
!(sr & XSPI_SR_TX_EMPTY_MASK) &&
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 2e0647a06890..e25df9990f82 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2851,6 +2851,18 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
sizeof(spi->modalias));
+ /*
+ * This gets re-tried in spi_probe() for -EPROBE_DEFER handling in case
+ * the GPIO controller does not have a driver yet. This needs to be done
+ * here too, because this call sets the GPIO direction and/or bias.
+ * Setting these needs to be done even if there is no driver, in which
+ * case spi_probe() will never get called.
+ * TODO: ideally the setup of the GPIO should be handled in a generic
+ * manner in the ACPI/gpiolib core code.
+ */
+ if (spi->irq < 0)
+ spi->irq = acpi_dev_gpio_irq_get(adev, 0);
+
acpi_device_set_enumerated(adev);
adev->power.flags.ignore_parent = true;
generated by cgit (git 2.34.1) at 2025-11-30 20:14:12 +0000