summaryrefslogtreecommitdiff
path: root/drivers/ufs/host/ufs-qcom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ufs/host/ufs-qcom.c')
-rw-r--r--drivers/ufs/host/ufs-qcom.c90
1 files changed, 57 insertions, 33 deletions
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 18a978452001..4bbe4de1679b 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -532,6 +532,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
goto out_disable_phy;
}
+ ret = phy_calibrate(phy);
+ if (ret) {
+ dev_err(hba->dev, "Failed to calibrate PHY: %d\n", ret);
+ goto out_disable_phy;
+ }
+
ufs_qcom_select_unipro_mode(host);
return 0;
@@ -552,11 +558,32 @@ out_disable_phy:
*/
static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
{
+ int err;
+
+ /* Enable UTP internal clock gating */
ufshcd_rmwl(hba, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2_CGC_EN_ALL,
REG_UFS_CFG2);
/* Ensure that HW clock gating is enabled before next operations */
ufshcd_readl(hba, REG_UFS_CFG2);
+
+ /* Enable Unipro internal clock gating */
+ err = ufshcd_dme_rmw(hba, DL_VS_CLK_CFG_MASK,
+ DL_VS_CLK_CFG_MASK, DL_VS_CLK_CFG);
+ if (err)
+ goto out;
+
+ err = ufshcd_dme_rmw(hba, PA_VS_CLK_CFG_REG_MASK,
+ PA_VS_CLK_CFG_REG_MASK, PA_VS_CLK_CFG_REG);
+ if (err)
+ goto out;
+
+ err = ufshcd_dme_rmw(hba, DME_VS_CORE_CLK_CTRL_DME_HW_CGC_EN,
+ DME_VS_CORE_CLK_CTRL_DME_HW_CGC_EN,
+ DME_VS_CORE_CLK_CTRL);
+out:
+ if (err)
+ dev_err(hba->dev, "hw clk gating enabled failed\n");
}
static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
@@ -705,26 +732,17 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- struct phy *phy = host->generic_phy;
if (status == PRE_CHANGE)
return 0;
- if (ufs_qcom_is_link_off(hba)) {
- /*
- * Disable the tx/rx lane symbol clocks before PHY is
- * powered down as the PLL source should be disabled
- * after downstream clocks are disabled.
- */
+ if (!ufs_qcom_is_link_active(hba))
ufs_qcom_disable_lane_clks(host);
- phy_power_off(phy);
- /* reset the connected UFS device during power down */
- ufs_qcom_device_reset_ctrl(hba, true);
- } else if (!ufs_qcom_is_link_active(hba)) {
- ufs_qcom_disable_lane_clks(host);
- }
+ /* reset the connected UFS device during power down */
+ if (ufs_qcom_is_link_off(hba) && host->device_reset)
+ ufs_qcom_device_reset_ctrl(hba, true);
return ufs_qcom_ice_suspend(host);
}
@@ -732,26 +750,11 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- struct phy *phy = host->generic_phy;
int err;
- if (ufs_qcom_is_link_off(hba)) {
- err = phy_power_on(phy);
- if (err) {
- dev_err(hba->dev, "%s: failed PHY power on: %d\n",
- __func__, err);
- return err;
- }
-
- err = ufs_qcom_enable_lane_clks(host);
- if (err)
- return err;
-
- } else if (!ufs_qcom_is_link_active(hba)) {
- err = ufs_qcom_enable_lane_clks(host);
- if (err)
- return err;
- }
+ err = ufs_qcom_enable_lane_clks(host);
+ if (err)
+ return err;
return ufs_qcom_ice_resume(host);
}
@@ -1130,12 +1133,20 @@ static void ufs_qcom_set_caps(struct ufs_hba *hba)
* @on: If true, enable clocks else disable them.
* @status: PRE_CHANGE or POST_CHANGE notify
*
+ * There are certain clocks which comes from the PHY so it needs
+ * to be managed together along with controller clocks which also
+ * provides a better power saving. Hence keep phy_power_off/on calls
+ * in ufs_qcom_setup_clocks, so that PHY's regulators & clks can be
+ * turned on/off along with UFS's clocks.
+ *
* Return: 0 on success, non-zero on failure.
*/
static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy;
+ int err;
/*
* In case ufs_qcom_init() is not yet done, simply ignore.
@@ -1145,6 +1156,8 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
if (!host)
return 0;
+ phy = host->generic_phy;
+
switch (status) {
case PRE_CHANGE:
if (on) {
@@ -1154,10 +1167,22 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
/* disable device ref_clk */
ufs_qcom_dev_ref_clk_ctrl(host, false);
}
+
+ err = phy_power_off(phy);
+ if (err) {
+ dev_err(hba->dev, "phy power off failed, ret=%d\n", err);
+ return err;
+ }
}
break;
case POST_CHANGE:
if (on) {
+ err = phy_power_on(phy);
+ if (err) {
+ dev_err(hba->dev, "phy power on failed, ret = %d\n", err);
+ return err;
+ }
+
/* enable the device ref clock for HS mode*/
if (ufshcd_is_hs_mode(&hba->pwr_info))
ufs_qcom_dev_ref_clk_ctrl(host, true);
@@ -2109,8 +2134,7 @@ static int ufs_qcom_config_esi(struct ufs_hba *hba)
retain_and_null_ptr(qi);
- if (host->hw_ver.major == 6 && host->hw_ver.minor == 0 &&
- host->hw_ver.step == 0) {
+ if (host->hw_ver.major >= 6) {
ufshcd_rmwl(hba, ESI_VEC_MASK, FIELD_PREP(ESI_VEC_MASK, MAX_ESI_VEC - 1),
REG_UFS_CFG3);
}