diff options
Diffstat (limited to 'drivers/usb/dwc3/core.h')
| -rw-r--r-- | drivers/usb/dwc3/core.h | 67 |
1 files changed, 48 insertions, 19 deletions
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 7e80dd3d466b..d5b985fa12f4 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -33,6 +33,13 @@ #include <linux/power_supply.h> +/* + * DWC3 Multiport controllers support up to 15 High-Speed PHYs + * and 4 SuperSpeed PHYs. + */ +#define DWC3_USB2_MAX_PORTS 15 +#define DWC3_USB3_MAX_PORTS 4 + #define DWC3_MSG_MAX 500 /* Global constants */ @@ -74,7 +81,7 @@ #define DWC3_GSNPSREV_MASK 0xffff #define DWC3_GSNPS_ID(p) (((p) & DWC3_GSNPSID_MASK) >> 16) -/* DWC3 registers memory space boundries */ +/* DWC3 registers memory space boundaries */ #define DWC3_XHCI_REGS_START 0x0 #define DWC3_XHCI_REGS_END 0x7fff #define DWC3_GLOBALS_REGS_START 0xc100 @@ -172,7 +179,7 @@ #define DWC3_OEVTEN 0xcc0C #define DWC3_OSTS 0xcc10 -#define DWC3_LLUCTL 0xd024 +#define DWC3_LLUCTL(n) (0xd024 + ((n) * 0x80)) /* Bit fields */ @@ -187,6 +194,10 @@ #define DWC3_GSBUSCFG0_INCRBRSTENA (1 << 0) /* undefined length enable */ #define DWC3_GSBUSCFG0_INCRBRST_MASK 0xff +/* Global SoC Bus Configuration Register: AHB-prot/AXI-cache/OCP-ReqInfo */ +#define DWC3_GSBUSCFG0_REQINFO(n) (((n) & 0xffff) << 16) +#define DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED 0xffffffff + /* Global Debug LSP MUX Select */ #define DWC3_GDBGLSPMUX_ENDBC BIT(15) /* Host only */ #define DWC3_GDBGLSPMUX_HOSTSELECT(n) ((n) & 0x3fff) @@ -410,9 +421,11 @@ /* Global User Control Register 2 */ #define DWC3_GUCTL2_RST_ACTBITLATER BIT(14) +#define DWC3_GUCTL2_LC_TIMER BIT(19) /* Global User Control Register 3 */ #define DWC3_GUCTL3_SPLITDISABLE BIT(14) +#define DWC3_GUCTL3_USB20_RETRY_DISABLE BIT(16) /* Device Configuration Register */ #define DWC3_DCFG_NUMLANES(n) (((n) & 0x3) << 30) /* DWC_usb32 only */ @@ -452,6 +465,7 @@ #define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6)) /* These apply for core versions 1.94a and later */ +#define DWC3_DCTL_NYET_THRES_MASK (0xf << 20) #define DWC3_DCTL_NYET_THRES(n) (((n) & 0xf) << 20) #define DWC3_DCTL_KEEP_CONNECT BIT(19) @@ -703,6 +717,7 @@ struct dwc3_event_buffer { /** * struct dwc3_ep - device side endpoint representation * @endpoint: usb endpoint + * @nostream_work: work for handling bulk NoStream * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint @@ -729,6 +744,7 @@ struct dwc3_event_buffer { */ struct dwc3_ep { struct usb_ep endpoint; + struct delayed_work nostream_work; struct list_head cancelled_list; struct list_head pending_list; struct list_head started_list; @@ -751,7 +767,7 @@ struct dwc3_ep { #define DWC3_EP_WAIT_TRANSFER_COMPLETE BIT(7) #define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8) #define DWC3_EP_FORCE_RESTART_STREAM BIT(9) -#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10) +#define DWC3_EP_STREAM_PRIMED BIT(10) #define DWC3_EP_PENDING_CLEAR_STALL BIT(11) #define DWC3_EP_TXFIFO_RESIZED BIT(12) #define DWC3_EP_DELAY_STOP BIT(13) @@ -903,6 +919,7 @@ struct dwc3_hwparams { #define DWC3_MODE(n) ((n) & 0x7) /* HWPARAMS1 */ +#define DWC3_SPRAM_TYPE(n) (((n) >> 23) & 1) #define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15) /* HWPARAMS3 */ @@ -913,6 +930,9 @@ struct dwc3_hwparams { #define DWC3_NUM_IN_EPS(p) (((p)->hwparams3 & \ (DWC3_NUM_IN_EPS_MASK)) >> 18) +/* HWPARAMS6 */ +#define DWC3_RAM0_DEPTH(n) (((n) & (0xffff0000)) >> 16) + /* HWPARAMS7 */ #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) @@ -925,18 +945,14 @@ struct dwc3_hwparams { * @request: struct usb_request to be transferred * @list: a list_head used for request queueing * @dep: struct dwc3_ep owning this request - * @sg: pointer to first incomplete sg * @start_sg: pointer to the sg which should be queued next * @num_pending_sgs: counter to pending sgs - * @num_queued_sgs: counter to the number of sgs which already got queued * @remaining: amount of data remaining * @status: internal dwc3 request status tracking * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb * @trb_dma: DMA address of @trb * @num_trbs: number of TRBs used by this request - * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP - * or unaligned OUT) * @direction: IN or OUT direction flag * @mapped: true when request has been dma-mapped */ @@ -944,11 +960,9 @@ struct dwc3_request { struct usb_request request; struct list_head list; struct dwc3_ep *dep; - struct scatterlist *sg; struct scatterlist *start_sg; unsigned int num_pending_sgs; - unsigned int num_queued_sgs; unsigned int remaining; unsigned int status; @@ -966,7 +980,6 @@ struct dwc3_request { unsigned int num_trbs; - unsigned int needs_extra_trb:1; unsigned int direction:1; unsigned int mapped:1; }; @@ -1037,8 +1050,10 @@ struct dwc3_scratchpad_array { * @usb_psy: pointer to power supply interface. * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY - * @usb2_generic_phy: pointer to USB2 PHY - * @usb3_generic_phy: pointer to USB3 PHY + * @usb2_generic_phy: pointer to array of USB2 PHYs + * @usb3_generic_phy: pointer to array of USB3 PHYs + * @num_usb2_ports: number of USB2 ports + * @num_usb3_ports: number of USB3 ports * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface * @ulpi_ready: flag to indicate that ULPI is initialized @@ -1068,6 +1083,7 @@ struct dwc3_scratchpad_array { * @tx_max_burst_prd: max periodic ESS transmit burst size * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize * @clear_stall_protocol: endpoint number that requires a delayed status phase + * @num_hc_interrupters: number of host controller interrupters * @hsphy_interface: "utmi" or "ulpi" * @connected: true when we're connected to a host, false otherwise * @softconnect: true when gadget connect is called, false when disconnect runs @@ -1136,6 +1152,8 @@ struct dwc3_scratchpad_array { * @sys_wakeup: set if the device may do system wakeup. * @wakeup_configured: set if the device is configured for remote wakeup. * @suspended: set to track suspend event due to U3/L2. + * @susphy_state: state of DWC3_GUSB2PHYCFG_SUSPHY + DWC3_GUSB3PIPECTL_SUSPHY + * before PM suspend. * @imod_interval: set the interrupt moderation interval in 250ns * increments or 0 to disable. * @max_cfg_eps: current max number of IN eps used across all USB configs. @@ -1144,6 +1162,12 @@ struct dwc3_scratchpad_array { * @num_ep_resized: carries the current number endpoints which have had its tx * fifo resized. * @debug_root: root debugfs directory for this device to put its files in. + * @gsbuscfg0_reqinfo: store GSBUSCFG0.DATRDREQINFO, DESRDREQINFO, + * DATWRREQINFO, and DESWRREQINFO value passed from + * glue driver. + * @wakeup_pending_funcs: Indicates whether any interface has requested for + * function wakeup in bitmap format where bit position + * represents interface_id. */ struct dwc3 { struct work_struct drd_work; @@ -1184,8 +1208,11 @@ struct dwc3 { struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; - struct phy *usb2_generic_phy; - struct phy *usb3_generic_phy; + struct phy *usb2_generic_phy[DWC3_USB2_MAX_PORTS]; + struct phy *usb3_generic_phy[DWC3_USB3_MAX_PORTS]; + + u8 num_usb2_ports; + u8 num_usb3_ports; bool phys_ready; @@ -1250,6 +1277,7 @@ struct dwc3 { #define DWC3_REVISION_290A 0x5533290a #define DWC3_REVISION_300A 0x5533300a #define DWC3_REVISION_310A 0x5533310a +#define DWC3_REVISION_320A 0x5533320a #define DWC3_REVISION_330A 0x5533330a #define DWC31_REVISION_ANY 0x0 @@ -1306,6 +1334,7 @@ struct dwc3 { u8 tx_max_burst_prd; u8 tx_fifo_resize_max_num; u8 clear_stall_protocol; + u16 num_hc_interrupters; const char *hsphy_interface; @@ -1361,6 +1390,7 @@ struct dwc3 { unsigned sys_wakeup:1; unsigned wakeup_configured:1; unsigned suspended:1; + unsigned susphy_state:1; u16 imod_interval; @@ -1368,6 +1398,8 @@ struct dwc3 { int last_fifo_depth; int num_ep_resized; struct dentry *debug_root; + u32 gsbuscfg0_reqinfo; + u32 wakeup_pending_funcs; }; #define INCRX_BURST_MODE 0 @@ -1532,7 +1564,7 @@ struct dwc3_gadget_ep_cmd_params { #define DWC3_HAS_OTG BIT(3) /* prototypes */ -void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode); +void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy); void dwc3_set_mode(struct dwc3 *dwc, u32 mode); u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type); @@ -1580,6 +1612,7 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc); void dwc3_event_buffers_cleanup(struct dwc3 *dwc); int dwc3_core_soft_reset(struct dwc3 *dwc); +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable); #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); @@ -1652,7 +1685,6 @@ static inline void dwc3_otg_host_init(struct dwc3 *dwc) #if !IS_ENABLED(CONFIG_USB_DWC3_HOST) int dwc3_gadget_suspend(struct dwc3 *dwc); int dwc3_gadget_resume(struct dwc3 *dwc); -void dwc3_gadget_process_pending_events(struct dwc3 *dwc); #else static inline int dwc3_gadget_suspend(struct dwc3 *dwc) { @@ -1664,9 +1696,6 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc) return 0; } -static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc) -{ -} #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */ #if IS_ENABLED(CONFIG_USB_DWC3_ULPI) |