diff options
Diffstat (limited to 'include/drm/display')
| -rw-r--r-- | include/drm/display/drm_dp.h | 62 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_dual_mode_helper.h | 2 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_helper.h | 164 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_mst_helper.h | 63 | ||||
| -rw-r--r-- | include/drm/display/drm_dsc.h | 3 | ||||
| -rw-r--r-- | include/drm/display/drm_dsc_helper.h | 3 | ||||
| -rw-r--r-- | include/drm/display/drm_hdmi_audio_helper.h | 22 | ||||
| -rw-r--r-- | include/drm/display/drm_hdmi_helper.h | 10 | ||||
| -rw-r--r-- | include/drm/display/drm_hdmi_state_helper.h | 33 |
9 files changed, 338 insertions, 24 deletions
diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h index 4891bd916d26..3001c0b6e7bb 100644 --- a/include/drm/display/drm_dp.h +++ b/include/drm/display/drm_dp.h @@ -232,6 +232,8 @@ #define DP_RECEIVER_ALPM_CAP 0x02e /* eDP 1.4 */ # define DP_ALPM_CAP (1 << 0) +# define DP_ALPM_PM_STATE_2A_SUPPORT (1 << 1) /* eDP 1.5 */ +# define DP_ALPM_AUX_LESS_CAP (1 << 2) /* eDP 1.5 */ #define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP 0x02f /* eDP 1.4 */ # define DP_AUX_FRAME_SYNC_CAP (1 << 0) @@ -357,6 +359,7 @@ # define DP_DSC_BITS_PER_PIXEL_1_4 0x2 # define DP_DSC_BITS_PER_PIXEL_1_2 0x3 # define DP_DSC_BITS_PER_PIXEL_1_1 0x4 +# define DP_DSC_BITS_PER_PIXEL_MASK 0x7 #define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ # define DP_PSR_IS_SUPPORTED 1 @@ -544,9 +547,16 @@ /* DFP Capability Extension */ #define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0a3 /* 2.0 */ -#define DP_PANEL_REPLAY_CAP 0x0b0 /* DP 2.0 */ -# define DP_PANEL_REPLAY_SUPPORT (1 << 0) -# define DP_PANEL_REPLAY_SU_SUPPORT (1 << 1) +#define DP_PANEL_REPLAY_CAP 0x0b0 /* DP 2.0 */ +# define DP_PANEL_REPLAY_SUPPORT (1 << 0) +# define DP_PANEL_REPLAY_SU_SUPPORT (1 << 1) +# define DP_PANEL_REPLAY_EARLY_TRANSPORT_SUPPORT (1 << 2) /* eDP 1.5 */ + +#define DP_PANEL_PANEL_REPLAY_CAPABILITY 0xb1 +# define DP_PANEL_PANEL_REPLAY_SU_GRANULARITY_REQUIRED (1 << 5) + +#define DP_PANEL_PANEL_REPLAY_X_GRANULARITY 0xb2 +#define DP_PANEL_PANEL_REPLAY_Y_GRANULARITY 0xb4 /* Link Configuration */ #define DP_LINK_BW_SET 0x100 @@ -677,7 +687,8 @@ #define DP_RECEIVER_ALPM_CONFIG 0x116 /* eDP 1.4 */ # define DP_ALPM_ENABLE (1 << 0) -# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE (1 << 1) +# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE (1 << 1) /* eDP 1.5 */ +# define DP_ALPM_MODE_AUX_LESS (1 << 2) /* eDP 1.5 */ #define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF 0x117 /* eDP 1.4 */ # define DP_AUX_FRAME_SYNC_ENABLE (1 << 0) @@ -686,6 +697,9 @@ #define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */ # define DP_PWR_NOT_NEEDED (1 << 0) +#define DP_EXTENDED_DPRX_SLEEP_WAKE_TIMEOUT_GRANT 0x119 /* 1.4a */ +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_GRANTED (1 << 0) + #define DP_FEC_CONFIGURATION 0x120 /* 1.4 */ # define DP_FEC_READY (1 << 0) # define DP_FEC_ERR_COUNT_SEL_MASK (7 << 1) @@ -728,10 +742,20 @@ #define PANEL_REPLAY_CONFIG 0x1b0 /* DP 2.0 */ # define DP_PANEL_REPLAY_ENABLE (1 << 0) +# define DP_PANEL_REPLAY_VSC_SDP_CRC_EN (1 << 1) /* eDP 1.5 */ # define DP_PANEL_REPLAY_UNRECOVERABLE_ERROR_EN (1 << 3) # define DP_PANEL_REPLAY_RFB_STORAGE_ERROR_EN (1 << 4) # define DP_PANEL_REPLAY_ACTIVE_FRAME_CRC_ERROR_EN (1 << 5) # define DP_PANEL_REPLAY_SU_ENABLE (1 << 6) +# define DP_PANEL_REPLAY_ENABLE_SU_REGION_ET (1 << 7) /* DP 2.1 */ + +#define PANEL_REPLAY_CONFIG2 0x1b1 /* eDP 1.5 */ +# define DP_PANEL_REPLAY_SINK_REFRESH_RATE_UNLOCK_GRANTED (1 << 0) +# define DP_PANEL_REPLAY_CRC_VERIFICATION (1 << 1) +# define DP_PANEL_REPLAY_SU_Y_GRANULARITY_EXTENDED_EN (1 << 2) +# define DP_PANEL_REPLAY_SU_Y_GRANULARITY_EXTENDED_VAL_SEL_SHIFT 3 +# define DP_PANEL_REPLAY_SU_Y_GRANULARITY_EXTENDED_VAL_SEL_MASK (0xf << 3) +# define DP_PANEL_REPLAY_SU_REGION_SCANLINE_CAPTURE (1 << 7) #define DP_PAYLOAD_ALLOCATE_SET 0x1c0 #define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1 @@ -976,6 +1000,7 @@ # define DP_EDP_14 0x03 # define DP_EDP_14a 0x04 /* eDP 1.4a */ # define DP_EDP_14b 0x05 /* eDP 1.4b */ +# define DP_EDP_15 0x06 /* eDP 1.5 */ #define DP_EDP_GENERAL_CAP_1 0x701 # define DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP (1 << 0) @@ -1000,6 +1025,7 @@ #define DP_EDP_GENERAL_CAP_2 0x703 # define DP_EDP_OVERDRIVE_ENGINE_ENABLED (1 << 0) # define DP_EDP_PANEL_LUMINANCE_CONTROL_CAPABLE (1 << 4) +# define DP_EDP_SMOOTH_BRIGHTNESS_CAPABLE (1 << 6) /* eDP 2.0 */ #define DP_EDP_GENERAL_CAP_3 0x704 /* eDP 1.4 */ # define DP_EDP_X_REGION_CAP_MASK (0xf << 0) @@ -1148,8 +1174,19 @@ # define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */ # define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */ +#define DP_EXTENDED_DPRX_SLEEP_WAKE_TIMEOUT_REQUEST 0x2211 /* 1.4a */ +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_MASK 0xff +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_1_MS 0x00 +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_20_MS 0x01 +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_40_MS 0x02 +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_60_MS 0x03 +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_80_MS 0x04 +# define DP_DPRX_SLEEP_WAKE_TIMEOUT_PERIOD_100_MS 0x05 + #define DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1 0x2214 /* 2.0 E11 */ # define DP_ADAPTIVE_SYNC_SDP_SUPPORTED (1 << 0) +# define DP_ADAPTIVE_SYNC_SDP_OPERATION_MODE GENMASK(1, 0) +# define DP_ADAPTIVE_SYNC_SDP_LENGTH GENMASK(5, 0) # define DP_AS_SDP_FIRST_HALF_LINE_OR_3840_PIXEL_CYCLE_WINDOW_NOT_SUPPORTED (1 << 1) # define DP_VSC_EXT_SDP_FRAMEWORK_VERSION_1_SUPPORTED (1 << 4) @@ -1451,6 +1488,8 @@ #define DP_MAX_LANE_COUNT_PHY_REPEATER 0xf0004 /* 1.4a */ #define DP_Repeater_FEC_CAPABILITY 0xf0004 /* 1.4 */ #define DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT 0xf0005 /* 1.4a */ +# define DP_EXTENDED_WAKE_TIMEOUT_REQUEST_MASK 0x7f +# define DP_EXTENDED_WAKE_TIMEOUT_GRANT (1 << 7) #define DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER 0xf0006 /* 2.0 */ # define DP_PHY_REPEATER_128B132B_SUPPORTED (1 << 0) /* See DP_128B132B_SUPPORTED_LINK_RATES for values */ @@ -1521,6 +1560,10 @@ enum drm_dp_phy { #define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1 0xf0039 /* 1.3 */ #define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1 0xf003b /* 1.3 */ +#define DP_OUI_PHY_REPEATER1 0xf003d /* 1.3 */ +#define DP_OUI_PHY_REPEATER(dp_phy) \ + DP_LTTPR_REG(dp_phy, DP_OUI_PHY_REPEATER1) + #define __DP_FEC1_BASE 0xf0290 /* 1.4 */ #define __DP_FEC2_BASE 0xf0298 /* 1.4 */ #define DP_FEC_BASE(dp_phy) \ @@ -1629,7 +1672,7 @@ enum drm_dp_phy { #define DP_RECEIVER_CAP_SIZE 0xf #define DP_DSC_RECEIVER_CAP_SIZE 0x10 /* DSC Capabilities 0x60 through 0x6F */ #define EDP_PSR_RECEIVER_CAP_SIZE 2 -#define EDP_DISPLAY_CTL_CAP_SIZE 3 +#define EDP_DISPLAY_CTL_CAP_SIZE 5 #define DP_LTTPR_COMMON_CAP_SIZE 8 #define DP_LTTPR_PHY_CAP_SIZE 3 @@ -1639,10 +1682,12 @@ enum drm_dp_phy { #define DP_SDP_AUDIO_COPYMANAGEMENT 0x05 /* DP 1.2 */ #define DP_SDP_ISRC 0x06 /* DP 1.2 */ #define DP_SDP_VSC 0x07 /* DP 1.2 */ +#define DP_SDP_ADAPTIVE_SYNC 0x22 /* DP 1.4 */ #define DP_SDP_CAMERA_GENERIC(i) (0x08 + (i)) /* 0-7, DP 1.3 */ #define DP_SDP_PPS 0x10 /* DP 1.4 */ #define DP_SDP_VSC_EXT_VESA 0x20 /* DP 1.4 */ #define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */ + /* 0x80+ CEA-861 infoframe types */ #define DP_SDP_AUDIO_INFOFRAME_HB2 0x1b @@ -1798,4 +1843,11 @@ enum dp_content_type { DP_CONTENT_TYPE_GAME = 0x04, }; +enum operation_mode { + DP_AS_SDP_AVT_DYNAMIC_VTOTAL = 0x00, + DP_AS_SDP_AVT_FIXED_VTOTAL = 0x01, + DP_AS_SDP_FAVT_TRR_NOT_REACHED = 0x02, + DP_AS_SDP_FAVT_TRR_REACHED = 0x03 +}; + #endif /* _DRM_DP_H_ */ diff --git a/include/drm/display/drm_dp_dual_mode_helper.h b/include/drm/display/drm_dp_dual_mode_helper.h index 7ee482265087..7ac6969db935 100644 --- a/include/drm/display/drm_dp_dual_mode_helper.h +++ b/include/drm/display/drm_dp_dual_mode_helper.h @@ -117,5 +117,5 @@ const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type); int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapter, enum drm_lspcon_mode *current_mode); int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapter, - enum drm_lspcon_mode reqd_mode); + enum drm_lspcon_mode reqd_mode, int time_out); #endif diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h index a62fcd051d4d..e4ca35143ff9 100644 --- a/include/drm/display/drm_dp_helper.h +++ b/include/drm/display/drm_dp_helper.h @@ -98,9 +98,41 @@ struct drm_dp_vsc_sdp { enum dp_content_type content_type; }; +/** + * struct drm_dp_as_sdp - drm DP Adaptive Sync SDP + * + * This structure represents a DP AS SDP of drm + * It is based on DP 2.1 spec [Table 2-126: Adaptive-Sync SDP Header Bytes] and + * [Table 2-127: Adaptive-Sync SDP Payload for DB0 through DB8] + * + * @sdp_type: Secondary-data packet type + * @revision: Revision Number + * @length: Number of valid data bytes + * @vtotal: Minimum Vertical Vtotal + * @target_rr: Target Refresh + * @duration_incr_ms: Successive frame duration increase + * @duration_decr_ms: Successive frame duration decrease + * @target_rr_divider: Target refresh rate divider + * @mode: Adaptive Sync Operation Mode + */ +struct drm_dp_as_sdp { + unsigned char sdp_type; + unsigned char revision; + unsigned char length; + int vtotal; + int target_rr; + int duration_incr_ms; + int duration_decr_ms; + bool target_rr_divider; + enum operation_mode mode; +}; + +void drm_dp_as_sdp_log(struct drm_printer *p, + const struct drm_dp_as_sdp *as_sdp); void drm_dp_vsc_sdp_log(struct drm_printer *p, const struct drm_dp_vsc_sdp *vsc); bool drm_dp_vsc_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +bool drm_dp_as_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]); int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]); @@ -222,6 +254,12 @@ drm_dp_channel_coding_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) } static inline bool +drm_dp_128b132b_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_128B132B; +} + +static inline bool drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) { return dpcd[DP_EDP_CONFIGURATION_CAP] & @@ -422,7 +460,18 @@ struct drm_dp_aux { * @wait_hpd_asserted: wait for HPD to be asserted * * This is mainly useful for eDP panels drivers to wait for an eDP - * panel to finish powering on. This is an optional function. + * panel to finish powering on. It is optional for DP AUX controllers + * to implement this function. It is required for DP AUX endpoints + * (panel drivers) to call this function after powering up but before + * doing AUX transfers unless the DP AUX endpoint driver knows that + * we're not using the AUX controller's HPD. One example of the panel + * driver not needing to call this is if HPD is hooked up to a GPIO + * that the panel driver can read directly. + * + * If a DP AUX controller does not implement this function then it + * may still support eDP panels that use the AUX controller's built-in + * HPD signal by implementing a long wait for HPD in the transfer() + * callback, though this is deprecated. * * This function will efficiently wait for the HPD signal to be * asserted. The `wait_us` parameter that is passed in says that we @@ -469,6 +518,11 @@ struct drm_dp_aux { * @powered_down: If true then the remote endpoint is powered down. */ bool powered_down; + + /** + * @no_zero_sized: If the hw can't use zero sized transfers (NVIDIA) + */ + bool no_zero_sized; }; int drm_dp_dpcd_probe(struct drm_dp_aux *aux, unsigned int offset); @@ -479,13 +533,72 @@ ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, void *buffer, size_t size); /** + * drm_dp_dpcd_read_data() - read a series of bytes from the DPCD + * @aux: DisplayPort AUX channel (SST or MST) + * @offset: address of the (first) register to read + * @buffer: buffer to store the register values + * @size: number of bytes in @buffer + * + * Returns zero (0) on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +static inline int drm_dp_dpcd_read_data(struct drm_dp_aux *aux, + unsigned int offset, + void *buffer, size_t size) +{ + int ret; + + ret = drm_dp_dpcd_read(aux, offset, buffer, size); + if (ret < 0) + return ret; + if (ret < size) + return -EPROTO; + + return 0; +} + +/** + * drm_dp_dpcd_write_data() - write a series of bytes to the DPCD + * @aux: DisplayPort AUX channel (SST or MST) + * @offset: address of the (first) register to write + * @buffer: buffer containing the values to write + * @size: number of bytes in @buffer + * + * Returns zero (0) on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +static inline int drm_dp_dpcd_write_data(struct drm_dp_aux *aux, + unsigned int offset, + void *buffer, size_t size) +{ + int ret; + + ret = drm_dp_dpcd_write(aux, offset, buffer, size); + if (ret < 0) + return ret; + if (ret < size) + return -EPROTO; + + return 0; +} + +/** * drm_dp_dpcd_readb() - read a single byte from the DPCD * @aux: DisplayPort AUX channel * @offset: address of the register to read * @valuep: location where the value of the register will be stored * * Returns the number of bytes transferred (1) on success, or a negative - * error code on failure. + * error code on failure. In most of the cases you should be using + * drm_dp_dpcd_read_byte() instead. */ static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, unsigned int offset, u8 *valuep) @@ -500,7 +613,8 @@ static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, * @value: value to write to the register * * Returns the number of bytes transferred (1) on success, or a negative - * error code on failure. + * error code on failure. In most of the cases you should be using + * drm_dp_dpcd_write_byte() instead. */ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, unsigned int offset, u8 value) @@ -508,6 +622,34 @@ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, return drm_dp_dpcd_write(aux, offset, &value, 1); } +/** + * drm_dp_dpcd_read_byte() - read a single byte from the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to read + * @valuep: location where the value of the register will be stored + * + * Returns zero (0) on success, or a negative error code on failure. + */ +static inline int drm_dp_dpcd_read_byte(struct drm_dp_aux *aux, + unsigned int offset, u8 *valuep) +{ + return drm_dp_dpcd_read_data(aux, offset, valuep, 1); +} + +/** + * drm_dp_dpcd_write_byte() - write a single byte to the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to write + * @value: value to write to the register + * + * Returns zero (0) on success, or a negative error code on failure. + */ +static inline int drm_dp_dpcd_write_byte(struct drm_dp_aux *aux, + unsigned int offset, u8 value) +{ + return drm_dp_dpcd_write_data(aux, offset, &value, 1); +} + int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux, u8 dpcd[DP_RECEIVER_CAP_SIZE]); @@ -517,6 +659,13 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, enum drm_dp_phy dp_phy, u8 link_status[DP_LINK_STATUS_SIZE]); +int drm_dp_link_power_up(struct drm_dp_aux *aux, unsigned char revision); +int drm_dp_link_power_down(struct drm_dp_aux *aux, unsigned char revision); + +int drm_dp_dpcd_write_payload(struct drm_dp_aux *aux, + int vcpid, u8 start_time_slot, u8 time_slot_count); +int drm_dp_dpcd_clear_payload(struct drm_dp_aux *aux); +int drm_dp_dpcd_poll_act_handled(struct drm_dp_aux *aux, int timeout_ms); bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux, u8 real_edid_checksum); @@ -576,9 +725,12 @@ int drm_dp_read_lttpr_phy_caps(struct drm_dp_aux *aux, u8 caps[DP_LTTPR_PHY_CAP_SIZE]); int drm_dp_lttpr_count(const u8 cap[DP_LTTPR_COMMON_CAP_SIZE]); int drm_dp_lttpr_max_link_rate(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); +int drm_dp_lttpr_set_transparent_mode(struct drm_dp_aux *aux, bool enable); +int drm_dp_lttpr_init(struct drm_dp_aux *aux, int lttpr_count); int drm_dp_lttpr_max_lane_count(const u8 caps[DP_LTTPR_COMMON_CAP_SIZE]); bool drm_dp_lttpr_voltage_swing_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); bool drm_dp_lttpr_pre_emphasis_level_3_supported(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]); +void drm_dp_lttpr_wake_timeout_setup(struct drm_dp_aux *aux, bool transparent_mode); void drm_dp_remote_aux_init(struct drm_dp_aux *aux); void drm_dp_aux_init(struct drm_dp_aux *aux); @@ -609,6 +761,8 @@ struct drm_dp_desc { int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc, bool is_branch); +int drm_dp_dump_lttpr_desc(struct drm_dp_aux *aux, enum drm_dp_phy dp_phy); + /** * enum drm_dp_quirk - Display Port sink/branch device specific quirks * @@ -722,7 +876,7 @@ static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel, #endif -#ifdef CONFIG_DRM_DP_CEC +#ifdef CONFIG_DRM_DISPLAY_DP_AUX_CEC void drm_dp_cec_irq(struct drm_dp_aux *aux); void drm_dp_cec_register_connector(struct drm_dp_aux *aux, struct drm_connector *connector); @@ -822,5 +976,7 @@ int drm_dp_bw_channel_coding_efficiency(bool is_uhbr); int drm_dp_max_dprx_data_rate(int max_link_rate, int max_lanes); ssize_t drm_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc, struct dp_sdp *sdp); +int drm_dp_link_symbol_cycles(int lane_count, int pixels, int dsc_slice_count, + int bpp_x16, int symbol_size, bool is_mst); #endif /* _DRM_DP_HELPER_H_ */ diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h index 9b19d8bd520a..2cfe1d4bfc96 100644 --- a/include/drm/display/drm_dp_mst_helper.h +++ b/include/drm/display/drm_dp_mst_helper.h @@ -83,7 +83,6 @@ struct drm_dp_mst_branch; * @passthrough_aux: parent aux to which DSC pass-through requests should be * sent, only set if DSC pass-through is possible. * @parent: branch device parent of this port - * @vcpi: Virtual Channel Payload info for this port. * @connector: DRM connector this port is connected to. Protected by * &drm_dp_mst_topology_mgr.base.lock. * @mgr: topology manager this port lives under. @@ -223,6 +222,13 @@ struct drm_dp_mst_branch { */ struct list_head destroy_next; + /** + * @rad: Relative Address of the MST branch. + * For &drm_dp_mst_topology_mgr.mst_primary, it's rad[8] are all 0, + * unset and unused. For MST branches connected after mst_primary, + * in each element of rad[] the nibbles are ordered by the most + * signifcant 4 bits first and the least significant 4 bits second. + */ u8 rad[8]; u8 lct; int num_ports; @@ -245,18 +251,18 @@ struct drm_dp_mst_branch { bool link_address_sent; /* global unique identifier to identify branch devices */ - u8 guid[16]; + guid_t guid; }; struct drm_dp_nak_reply { - u8 guid[16]; + guid_t guid; u8 reason; u8 nak_data; }; struct drm_dp_link_address_ack_reply { - u8 guid[16]; + guid_t guid; u8 nports; struct drm_dp_link_addr_reply_port { bool input_port; @@ -266,7 +272,7 @@ struct drm_dp_link_address_ack_reply { bool ddps; bool legacy_device_plug_status; u8 dpcd_revision; - u8 peer_guid[16]; + guid_t peer_guid; u8 num_sdp_streams; u8 num_sdp_stream_sinks; } ports[16]; @@ -349,7 +355,7 @@ struct drm_dp_allocate_payload_ack_reply { }; struct drm_dp_connection_status_notify { - u8 guid[16]; + guid_t guid; u8 port_number; bool legacy_device_plug_status; bool displayport_device_plug_status; @@ -426,7 +432,7 @@ struct drm_dp_query_payload { struct drm_dp_resource_status_notify { u8 port_number; - u8 guid[16]; + guid_t guid; u16 available_pbn; }; @@ -701,6 +707,13 @@ struct drm_dp_mst_topology_mgr { bool payload_id_table_cleared : 1; /** + * @reset_rx_state: The down request's reply and up request message + * receiver state must be reset, after the topology manager got + * removed. Protected by @lock. + */ + bool reset_rx_state : 1; + + /** * @payload_count: The number of currently active payloads in hardware. This value is only * intended to be used internally by MST helpers for payload tracking, and is only safe to * read/write from the atomic commit (not check) context. @@ -818,7 +831,28 @@ int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr, void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr); -bool drm_dp_read_mst_cap(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +/** + * enum drm_dp_mst_mode - sink's MST mode capability + */ +enum drm_dp_mst_mode { + /** + * @DRM_DP_SST: The sink does not support MST nor single stream sideband + * messaging. + */ + DRM_DP_SST, + /** + * @DRM_DP_MST: Sink supports MST, more than one stream and single + * stream sideband messaging. + */ + DRM_DP_MST, + /** + * @DRM_DP_SST_SIDEBAND_MSG: Sink supports only one stream and single + * stream sideband messaging. + */ + DRM_DP_SST_SIDEBAND_MSG, +}; + +enum drm_dp_mst_mode drm_dp_read_mst_cap(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]); int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state); int drm_dp_mst_hpd_irq_handle_event(struct drm_dp_mst_topology_mgr *mgr, @@ -840,8 +874,7 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port); -fixed20_12 drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr, - int link_rate, int link_lane_count); +fixed20_12 drm_dp_get_vc_payload_bw(int link_rate, int link_lane_count); int drm_dp_calc_pbn_mode(int clock, int bpp); @@ -851,7 +884,6 @@ int drm_dp_add_payload_part1(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_topology_state *mst_state, struct drm_dp_mst_atomic_payload *payload); int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr, - struct drm_atomic_state *state, struct drm_dp_mst_atomic_payload *payload); void drm_dp_remove_payload_part1(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_topology_state *mst_state, @@ -866,6 +898,8 @@ int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr); void drm_dp_mst_dump_topology(struct seq_file *m, struct drm_dp_mst_topology_mgr *mgr); +void drm_dp_mst_topology_queue_probe(struct drm_dp_mst_topology_mgr *mgr); + void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr); int __must_check drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr, @@ -928,6 +962,13 @@ int __must_check drm_dp_mst_root_conn_atomic_check(struct drm_connector_state *n void drm_dp_mst_get_port_malloc(struct drm_dp_mst_port *port); void drm_dp_mst_put_port_malloc(struct drm_dp_mst_port *port); +static inline +bool drm_dp_mst_port_is_logical(struct drm_dp_mst_port *port) +{ + return port->port_num >= DP_MST_LOGICAL_PORT_0; +} + +struct drm_dp_aux *drm_dp_mst_aux_for_parent(struct drm_dp_mst_port *port); struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port); static inline struct drm_dp_mst_topology_state * diff --git a/include/drm/display/drm_dsc.h b/include/drm/display/drm_dsc.h index bc90273d06a6..bbbe7438473d 100644 --- a/include/drm/display/drm_dsc.h +++ b/include/drm/display/drm_dsc.h @@ -40,9 +40,6 @@ #define DSC_PPS_RC_RANGE_MINQP_SHIFT 11 #define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6 #define DSC_PPS_NATIVE_420_SHIFT 1 -#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16 -#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0 -#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13 /** * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters diff --git a/include/drm/display/drm_dsc_helper.h b/include/drm/display/drm_dsc_helper.h index 913aa2071232..2c2b9033f60f 100644 --- a/include/drm/display/drm_dsc_helper.h +++ b/include/drm/display/drm_dsc_helper.h @@ -17,6 +17,8 @@ enum drm_dsc_params_type { DRM_DSC_1_2_420, }; +struct drm_printer; + void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header); int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size); void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp, @@ -28,6 +30,7 @@ int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg); u8 drm_dsc_initial_scale_value(const struct drm_dsc_config *dsc); u32 drm_dsc_flatness_det_thresh(const struct drm_dsc_config *dsc); u32 drm_dsc_get_bpp_int(const struct drm_dsc_config *vdsc_cfg); +void drm_dsc_dump_config(struct drm_printer *p, int indent, const struct drm_dsc_config *cfg); #endif /* _DRM_DSC_HELPER_H_ */ diff --git a/include/drm/display/drm_hdmi_audio_helper.h b/include/drm/display/drm_hdmi_audio_helper.h new file mode 100644 index 000000000000..c9a6faef4109 --- /dev/null +++ b/include/drm/display/drm_hdmi_audio_helper.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef DRM_DISPLAY_HDMI_AUDIO_HELPER_H_ +#define DRM_DISPLAY_HDMI_AUDIO_HELPER_H_ + +#include <linux/types.h> + +struct drm_connector; +struct drm_connector_hdmi_audio_funcs; + +struct device; + +int drm_connector_hdmi_audio_init(struct drm_connector *connector, + struct device *hdmi_codec_dev, + const struct drm_connector_hdmi_audio_funcs *funcs, + unsigned int max_i2s_playback_channels, + bool spdif_playback, + int sound_dai_port); +void drm_connector_hdmi_audio_plugged_notify(struct drm_connector *connector, + bool plugged); + +#endif diff --git a/include/drm/display/drm_hdmi_helper.h b/include/drm/display/drm_hdmi_helper.h index 76d234826e22..09145c9ee9fc 100644 --- a/include/drm/display/drm_hdmi_helper.h +++ b/include/drm/display/drm_hdmi_helper.h @@ -24,4 +24,14 @@ drm_hdmi_infoframe_set_hdr_metadata(struct hdmi_drm_infoframe *frame, void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, const struct drm_connector_state *conn_state); +unsigned long long +drm_hdmi_compute_mode_clock(const struct drm_display_mode *mode, + unsigned int bpc, enum hdmi_colorspace fmt); + +void +drm_hdmi_acr_get_n_cts(unsigned long long tmds_char_rate, + unsigned int sample_rate, + unsigned int *out_n, + unsigned int *out_cts); + #endif diff --git a/include/drm/display/drm_hdmi_state_helper.h b/include/drm/display/drm_hdmi_state_helper.h new file mode 100644 index 000000000000..2349c0d0f00f --- /dev/null +++ b/include/drm/display/drm_hdmi_state_helper.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef DRM_HDMI_STATE_HELPER_H_ +#define DRM_HDMI_STATE_HELPER_H_ + +struct drm_atomic_state; +struct drm_connector; +struct drm_connector_state; +struct drm_display_mode; +struct hdmi_audio_infoframe; + +enum drm_connector_status; + +void __drm_atomic_helper_connector_hdmi_reset(struct drm_connector *connector, + struct drm_connector_state *new_conn_state); + +int drm_atomic_helper_connector_hdmi_check(struct drm_connector *connector, + struct drm_atomic_state *state); + +int drm_atomic_helper_connector_hdmi_update_audio_infoframe(struct drm_connector *connector, + struct hdmi_audio_infoframe *frame); +int drm_atomic_helper_connector_hdmi_clear_audio_infoframe(struct drm_connector *connector); +int drm_atomic_helper_connector_hdmi_update_infoframes(struct drm_connector *connector, + struct drm_atomic_state *state); +void drm_atomic_helper_connector_hdmi_hotplug(struct drm_connector *connector, + enum drm_connector_status status); +void drm_atomic_helper_connector_hdmi_force(struct drm_connector *connector); + +enum drm_mode_status +drm_hdmi_connector_mode_valid(struct drm_connector *connector, + const struct drm_display_mode *mode); + +#endif // DRM_HDMI_STATE_HELPER_H_ |