diff options
Diffstat (limited to 'include/linux/platform_data/x86')
| -rw-r--r-- | include/linux/platform_data/x86/amd-fch.h | 13 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/asus-wmi.h | 72 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/int3472.h | 166 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/intel-mid_wdt.h | 19 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/intel_pmc_ipc.h | 98 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/intel_scu_ipc.h | 72 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/pwm-lpss.h | 33 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/soc.h | 12 |
8 files changed, 476 insertions, 9 deletions
diff --git a/include/linux/platform_data/x86/amd-fch.h b/include/linux/platform_data/x86/amd-fch.h new file mode 100644 index 000000000000..2cf5153edbc2 --- /dev/null +++ b/include/linux/platform_data/x86/amd-fch.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_AMD_FCH_H_ +#define _ASM_X86_AMD_FCH_H_ + +#define FCH_PM_BASE 0xFED80300 + +/* Register offsets from PM base: */ +#define FCH_PM_DECODEEN 0x00 +#define FCH_PM_DECODEEN_SMBUS0SEL GENMASK(20, 19) +#define FCH_PM_SCRATCH 0x80 +#define FCH_PM_S5_RESET_STATUS 0xC0 + +#endif /* _ASM_X86_AMD_FCH_H_ */ diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index ab1c7deff118..8a515179113d 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -4,6 +4,7 @@ #include <linux/errno.h> #include <linux/types.h> +#include <linux/dmi.h> /* WMI Methods */ #define ASUS_WMI_METHODID_SPEC 0x43455053 /* BIOS SPECification */ @@ -51,6 +52,10 @@ #define ASUS_WMI_DEVID_LED6 0x00020016 #define ASUS_WMI_DEVID_MICMUTE_LED 0x00040017 +/* Disable Camera LED */ +#define ASUS_WMI_DEVID_CAMERA_LED_NEG 0x00060078 /* 0 = on (unused) */ +#define ASUS_WMI_DEVID_CAMERA_LED 0x00060079 /* 1 = on */ + /* Backlight and Brightness */ #define ASUS_WMI_DEVID_ALS_ENABLE 0x00050001 /* Ambient Light Sensor */ #define ASUS_WMI_DEVID_BACKLIGHT 0x00050011 @@ -58,12 +63,14 @@ #define ASUS_WMI_DEVID_KBD_BACKLIGHT 0x00050021 #define ASUS_WMI_DEVID_LIGHT_SENSOR 0x00050022 /* ?? */ #define ASUS_WMI_DEVID_LIGHTBAR 0x00050025 +#define ASUS_WMI_DEVID_OOBE 0x0005002F /* This can only be used to disable the screen, not re-enable */ #define ASUS_WMI_DEVID_SCREENPAD_POWER 0x00050031 /* Writing a brightness re-enables the screen if disabled */ #define ASUS_WMI_DEVID_SCREENPAD_LIGHT 0x00050032 #define ASUS_WMI_DEVID_FAN_BOOST_MODE 0x00110018 #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 +#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019 /* Misc */ #define ASUS_WMI_DEVID_PANEL_OD 0x00050019 @@ -71,6 +78,7 @@ #define ASUS_WMI_DEVID_LID_FLIP 0x00060062 #define ASUS_WMI_DEVID_LID_FLIP_ROG 0x00060077 #define ASUS_WMI_DEVID_MINI_LED_MODE 0x0005001E +#define ASUS_WMI_DEVID_MINI_LED_MODE2 0x0005002E /* Storage */ #define ASUS_WMI_DEVID_CARDREADER 0x00080013 @@ -127,13 +135,18 @@ /* gpu mux switch, 0 = dGPU, 1 = Optimus */ #define ASUS_WMI_DEVID_GPU_MUX 0x00090016 +#define ASUS_WMI_DEVID_GPU_MUX_VIVO 0x00090026 /* TUF laptop RGB modes/colours */ #define ASUS_WMI_DEVID_TUF_RGB_MODE 0x00100056 +#define ASUS_WMI_DEVID_TUF_RGB_MODE2 0x0010005A /* TUF laptop RGB power/state */ #define ASUS_WMI_DEVID_TUF_RGB_STATE 0x00100057 +/* Bootup sound control */ +#define ASUS_WMI_DEVID_BOOT_SOUND 0x00130022 + /* DSTS masks */ #define ASUS_WMI_DSTS_STATUS_BIT 0x00000001 #define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002 @@ -144,9 +157,28 @@ #define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00 #define ASUS_WMI_DSTS_LIGHTBAR_MASK 0x0000000F +enum asus_ally_mcu_hack { + ASUS_WMI_ALLY_MCU_HACK_INIT, + ASUS_WMI_ALLY_MCU_HACK_ENABLED, + ASUS_WMI_ALLY_MCU_HACK_DISABLED, +}; + #if IS_REACHABLE(CONFIG_ASUS_WMI) +void set_ally_mcu_hack(enum asus_ally_mcu_hack status); +void set_ally_mcu_powersave(bool enabled); +int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval); int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval); #else +static inline void set_ally_mcu_hack(enum asus_ally_mcu_hack status) +{ +} +static inline void set_ally_mcu_powersave(bool enabled) +{ +} +static inline int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval) +{ + return -ENODEV; +} static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval) { @@ -154,4 +186,44 @@ static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, } #endif +/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */ +static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = { + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ProArt P16"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GA403U"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GU605M"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "RC71L"), + }, + }, + { }, +}; + #endif /* __PLATFORM_DATA_X86_ASUS_WMI_H */ diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h new file mode 100644 index 000000000000..78276a11c48d --- /dev/null +++ b/include/linux/platform_data/x86/int3472.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel INT3472 ACPI camera sensor power-management support + * + * Author: Dan Scally <djrscally@gmail.com> + */ + +#ifndef __PLATFORM_DATA_X86_INT3472_H +#define __PLATFORM_DATA_X86_INT3472_H + +#include <linux/clk-provider.h> +#include <linux/gpio/machine.h> +#include <linux/leds.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/types.h> + +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ +#ifndef I2C_DEV_NAME_FORMAT +#define I2C_DEV_NAME_FORMAT "i2c-%s" +#endif + +/* PMIC GPIO Types */ +#define INT3472_GPIO_TYPE_RESET 0x00 +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d +#define INT3472_GPIO_TYPE_HANDSHAKE 0x12 + +#define INT3472_PDEV_MAX_NAME_LEN 23 +#define INT3472_MAX_SENSOR_GPIOS 3 +#define INT3472_MAX_REGULATORS 3 + +/* E.g. "avdd\0" */ +#define GPIO_SUPPLY_NAME_LENGTH 5 +/* 12 chars for acpi_dev_name() + "-", e.g. "ABCD1234:00-" */ +#define GPIO_REGULATOR_NAME_LENGTH (12 + GPIO_SUPPLY_NAME_LENGTH) +/* lower- and upper-case mapping */ +#define GPIO_REGULATOR_SUPPLY_MAP_COUNT 2 +/* + * Ensure the GPIO is driven low/high for at least 2 ms before changing. + * + * 2 ms has been chosen because it is the minimum time ovXXXX sensors need to + * have their reset line driven logical high to properly register a reset. + */ +#define GPIO_REGULATOR_ENABLE_TIME (2 * USEC_PER_MSEC) +#define GPIO_REGULATOR_OFF_ON_DELAY (2 * USEC_PER_MSEC) + +#define INT3472_LED_MAX_NAME_LEN 32 + +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 + +#define INT3472_REGULATOR(_name, _ops, _enable_time, _off_on_delay) \ + (const struct regulator_desc) { \ + .name = _name, \ + .type = REGULATOR_VOLTAGE, \ + .ops = _ops, \ + .owner = THIS_MODULE, \ + .enable_time = _enable_time, \ + .off_on_delay = _off_on_delay, \ + } + +#define to_int3472_clk(hw) \ + container_of(hw, struct int3472_clock, clk_hw) + +#define to_int3472_device(clk) \ + container_of(clk, struct int3472_discrete_device, clock) + +struct acpi_device; +struct dmi_system_id; +struct i2c_client; +struct platform_device; + +struct int3472_cldb { + u8 version; + /* + * control logic type + * 0: UNKNOWN + * 1: DISCRETE(CRD-D) + * 2: PMIC TPS68470 + * 3: PMIC uP6641 + */ + u8 control_logic_type; + u8 control_logic_id; + u8 sensor_card_sku; + u8 reserved[10]; + u8 clock_source; + u8 reserved2[17]; +}; + +struct int3472_discrete_quirks { + /* For models where AVDD GPIO is shared between sensors */ + const char *avdd_second_sensor; +}; + +struct int3472_gpio_regulator { + /* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */ + struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2]; + char supply_name_upper[GPIO_SUPPLY_NAME_LENGTH]; + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; + struct gpio_desc *ena_gpio; + struct regulator_dev *rdev; + struct regulator_desc rdesc; +}; + +struct int3472_discrete_device { + struct acpi_device *adev; + struct device *dev; + struct acpi_device *sensor; + const char *sensor_name; + + struct int3472_gpio_regulator regulators[INT3472_MAX_REGULATORS]; + + struct int3472_clock { + struct clk *clk; + struct clk_hw clk_hw; + struct clk_lookup *cl; + struct gpio_desc *ena_gpio; + u32 frequency; + u8 imgclk_index; + } clock; + + struct int3472_pled { + struct led_classdev classdev; + struct led_lookup_data lookup; + char name[INT3472_LED_MAX_NAME_LEN]; + struct gpio_desc *gpio; + } pled; + + struct int3472_discrete_quirks quirks; + + unsigned int ngpios; /* how many GPIOs have we seen */ + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ + unsigned int n_regulator_gpios; /* how many have we mapped to a regulator */ + struct gpiod_lookup_table gpios; +}; + +extern const struct dmi_system_id skl_int3472_discrete_quirks[]; + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, + char *id); +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret); + +int int3472_discrete_parse_crs(struct int3472_discrete_device *int3472); +void int3472_discrete_cleanup(struct int3472_discrete_device *int3472); + +int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio); +int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472); +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472); + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio, + unsigned int enable_time, + const char *supply_name, + const char *second_sensor); +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472); + +int skl_int3472_register_pled(struct int3472_discrete_device *int3472, struct gpio_desc *gpio); +void skl_int3472_unregister_pled(struct int3472_discrete_device *int3472); + +#endif diff --git a/include/linux/platform_data/x86/intel-mid_wdt.h b/include/linux/platform_data/x86/intel-mid_wdt.h new file mode 100644 index 000000000000..e5c0210d0fec --- /dev/null +++ b/include/linux/platform_data/x86/intel-mid_wdt.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * intel-mid_wdt: generic Intel MID SCU watchdog driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * Contact: David Cohen <david.a.cohen@linux.intel.com> + */ + +#ifndef __PLATFORM_X86_INTEL_MID_WDT_H_ +#define __PLATFORM_X86_INTEL_MID_WDT_H_ + +#include <linux/platform_device.h> + +struct intel_mid_wdt_pdata { + int irq; + int (*probe)(struct platform_device *pdev); +}; + +#endif /* __PLATFORM_X86_INTEL_MID_WDT_H_ */ diff --git a/include/linux/platform_data/x86/intel_pmc_ipc.h b/include/linux/platform_data/x86/intel_pmc_ipc.h new file mode 100644 index 000000000000..1d34435b7001 --- /dev/null +++ b/include/linux/platform_data/x86/intel_pmc_ipc.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Core SoC Power Management Controller Header File + * + * Copyright (c) 2025, Intel Corporation. + * All Rights Reserved. + * + */ +#ifndef INTEL_PMC_IPC_H +#define INTEL_PMC_IPC_H +#include <linux/acpi.h> + +#define IPC_SOC_REGISTER_ACCESS 0xAA +#define IPC_SOC_SUB_CMD_READ 0x00 +#define IPC_SOC_SUB_CMD_WRITE 0x01 +#define PMC_IPCS_PARAM_COUNT 7 +#define VALID_IPC_RESPONSE 5 + +struct pmc_ipc_cmd { + u32 cmd; + u32 sub_cmd; + u32 size; + u32 wbuf[4]; +}; + +struct pmc_ipc_rbuf { + u32 buf[4]; +}; + +/** + * intel_pmc_ipc() - PMC IPC Mailbox accessor + * @ipc_cmd: Prepared input command to send + * @rbuf: Allocated array for returned IPC data + * + * Return: 0 on success. Non-zero on mailbox error + */ +static inline int intel_pmc_ipc(struct pmc_ipc_cmd *ipc_cmd, struct pmc_ipc_rbuf *rbuf) +{ +#ifdef CONFIG_ACPI + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object params[PMC_IPCS_PARAM_COUNT] = { + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + }; + struct acpi_object_list arg_list = { PMC_IPCS_PARAM_COUNT, params }; + union acpi_object *obj; + int status; + + if (!ipc_cmd || !rbuf) + return -EINVAL; + + /* + * 0: IPC Command + * 1: IPC Sub Command + * 2: Size + * 3-6: Write Buffer for offset + */ + params[0].integer.value = ipc_cmd->cmd; + params[1].integer.value = ipc_cmd->sub_cmd; + params[2].integer.value = ipc_cmd->size; + params[3].integer.value = ipc_cmd->wbuf[0]; + params[4].integer.value = ipc_cmd->wbuf[1]; + params[5].integer.value = ipc_cmd->wbuf[2]; + params[6].integer.value = ipc_cmd->wbuf[3]; + + status = acpi_evaluate_object(NULL, "\\IPCS", &arg_list, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + obj = buffer.pointer; + + if (obj && obj->type == ACPI_TYPE_PACKAGE && + obj->package.count == VALID_IPC_RESPONSE) { + const union acpi_object *objs = obj->package.elements; + + if ((u8)objs[0].integer.value != 0) + return -EINVAL; + + rbuf->buf[0] = objs[1].integer.value; + rbuf->buf[1] = objs[2].integer.value; + rbuf->buf[2] = objs[3].integer.value; + rbuf->buf[3] = objs[4].integer.value; + } else { + return -EINVAL; + } + + return 0; +#else + return -ENODEV; +#endif /* CONFIG_ACPI */ +} + +#endif /* INTEL_PMC_IPC_H */ diff --git a/include/linux/platform_data/x86/intel_scu_ipc.h b/include/linux/platform_data/x86/intel_scu_ipc.h new file mode 100644 index 000000000000..b287627759f7 --- /dev/null +++ b/include/linux/platform_data/x86/intel_scu_ipc.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_X86_INTEL_SCU_IPC_H_ +#define __PLATFORM_X86_INTEL_SCU_IPC_H_ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/types.h> + +struct device; +struct module; + +struct intel_scu_ipc_dev; + +/** + * struct intel_scu_ipc_data - Data used to configure SCU IPC + * @mem: Base address of SCU IPC MMIO registers + * @irq: The IRQ number used for SCU (optional) + */ +struct intel_scu_ipc_data { + struct resource mem; + int irq; +}; + +struct intel_scu_ipc_dev * +__intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define intel_scu_ipc_register(parent, scu_data) \ + __intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu); + +struct intel_scu_ipc_dev * +__devm_intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define devm_intel_scu_ipc_register(parent, scu_data) \ + __devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void); +void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu); +struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev); + +int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 *data); +int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data); +int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); +int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); + +int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data, u8 mask); + +int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub); +int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + size_t size, void *out, size_t outlen); + +static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + void *out, size_t outlen) +{ + return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen, + inlen, out, outlen); +} + +#endif diff --git a/include/linux/platform_data/x86/pwm-lpss.h b/include/linux/platform_data/x86/pwm-lpss.h index 752c06b47cc8..f0349edb47f4 100644 --- a/include/linux/platform_data/x86/pwm-lpss.h +++ b/include/linux/platform_data/x86/pwm-lpss.h @@ -15,9 +15,36 @@ struct pwm_lpss_boardinfo { unsigned int npwm; unsigned long base_unit_bits; /* - * Some versions of the IP may stuck in the state machine if enable - * bit is not set, and hence update bit will show busy status till - * the reset. For the rest it may be otherwise. + * NOTE: + * Intel Broxton, Apollo Lake, and Gemini Lake have different programming flow. + * + * Initial Enable or First Activation + * 1. Program the base unit and on time divisor values. + * 2. Set the software update bit. + * 3. Poll in a loop on the PWMCTRL bit until software update bit is cleared.+ + * 4. Enable the PWM output by setting PWM Enable. + * 5. Repeat the above steps for the next PWM Module. + * + * Dynamic update while PWM is Enabled + * 1. Program the base unit and on-time divisor values. + * 2. Set the software update bit. + * 3. Repeat the above steps for the next PWM module. + * + * + After setting PWMCTRL register's SW update bit, hardware automatically + * deasserts the SW update bit after a brief delay. It was observed that + * setting of PWM enable is typically done via read-modify-write of the PWMCTRL + * register. If there is no/little delay between setting software update bit + * and setting enable bit via read-modify-write, it is possible that the read + * could return with software enable as 1. In that case, the last write to set + * enable to 1 could also set sw_update to 1. If this happens, sw_update gets + * stuck and the driver code can hang as it explicitly waits for sw_update bit + * to be 0 after setting the enable bit to 1. To avoid this race condition, + * SW should poll on the software update bit to make sure that it is 0 before + * doing the read-modify-write to set the enable bit to 1. + * + * Also, we noted that if sw_update bit was set in step #1 above then when it + * is set again in step #2, sw_update bit never gets cleared and the flow hangs. + * As such, we need to make sure that sw_update bit is 0 when doing step #1. */ bool bypass; /* diff --git a/include/linux/platform_data/x86/soc.h b/include/linux/platform_data/x86/soc.h index a5705189e2ac..f981907a5cb0 100644 --- a/include/linux/platform_data/x86/soc.h +++ b/include/linux/platform_data/x86/soc.h @@ -20,7 +20,7 @@ static inline bool soc_intel_is_##soc(void) \ { \ static const struct x86_cpu_id soc##_cpu_ids[] = { \ - X86_MATCH_INTEL_FAM6_MODEL(type, NULL), \ + X86_MATCH_VFM(type, NULL), \ {} \ }; \ const struct x86_cpu_id *id; \ @@ -31,11 +31,11 @@ static inline bool soc_intel_is_##soc(void) \ return false; \ } -SOC_INTEL_IS_CPU(byt, ATOM_SILVERMONT); -SOC_INTEL_IS_CPU(cht, ATOM_AIRMONT); -SOC_INTEL_IS_CPU(apl, ATOM_GOLDMONT); -SOC_INTEL_IS_CPU(glk, ATOM_GOLDMONT_PLUS); -SOC_INTEL_IS_CPU(cml, KABYLAKE_L); +SOC_INTEL_IS_CPU(byt, INTEL_ATOM_SILVERMONT); +SOC_INTEL_IS_CPU(cht, INTEL_ATOM_AIRMONT); +SOC_INTEL_IS_CPU(apl, INTEL_ATOM_GOLDMONT); +SOC_INTEL_IS_CPU(glk, INTEL_ATOM_GOLDMONT_PLUS); +SOC_INTEL_IS_CPU(cml, INTEL_KABYLAKE_L); #undef SOC_INTEL_IS_CPU |