diff options
Diffstat (limited to 'include/linux/usb.h')
| -rw-r--r-- | include/linux/usb.h | 41 |
1 files changed, 24 insertions, 17 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h index 9e52179872a5..1b2545b4363b 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -51,6 +51,7 @@ struct ep_device; * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder * @ss_ep_comp: SuperSpeed companion descriptor for this endpoint * @ssp_isoc_ep_comp: SuperSpeedPlus isoc companion descriptor for this endpoint + * @eusb2_isoc_ep_comp: eUSB2 isoc companion descriptor for this endpoint * @urb_list: urbs queued to this endpoint; maintained by usbcore * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH) * with one or more transfer descriptors (TDs) per urb @@ -64,9 +65,10 @@ struct ep_device; * descriptor within an active interface in a given USB configuration. */ struct usb_host_endpoint { - struct usb_endpoint_descriptor desc; - struct usb_ss_ep_comp_descriptor ss_ep_comp; - struct usb_ssp_isoc_ep_comp_descriptor ssp_isoc_ep_comp; + struct usb_endpoint_descriptor desc; + struct usb_ss_ep_comp_descriptor ss_ep_comp; + struct usb_ssp_isoc_ep_comp_descriptor ssp_isoc_ep_comp; + struct usb_eusb2_isoc_ep_comp_descriptor eusb2_isoc_ep_comp; struct list_head urb_list; void *hcpriv; struct ep_device *ep_dev; /* For sysfs info */ @@ -440,11 +442,6 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, /* ----------------------------------------------------------------------- */ -/* USB device number allocation bitmap */ -struct usb_devmap { - unsigned long devicemap[128 / (8*sizeof(unsigned long))]; -}; - /* * Allocated per bus (tree of devices) we have: */ @@ -472,7 +469,7 @@ struct usb_bus { * round-robin allocation */ struct mutex devnum_next_mutex; /* devnum_next mutex */ - struct usb_devmap devmap; /* device address allocation map */ + DECLARE_BITMAP(devmap, 128); /* USB device number allocation bitmap */ struct usb_device *root_hub; /* Root hub */ struct usb_bus *hs_companion; /* Companion EHCI bus, if any */ @@ -500,6 +497,12 @@ struct usb_dev_state; struct usb_tt; +enum usb_link_tunnel_mode { + USB_LINK_UNKNOWN = 0, + USB_LINK_NATIVE, + USB_LINK_TUNNELED, +}; + enum usb_port_connect_type { USB_PORT_CONNECT_TYPE_UNKNOWN = 0, USB_PORT_CONNECT_TYPE_HOT_PLUG, @@ -610,6 +613,7 @@ struct usb3_lpm_parameters { * WUSB devices are not, until we authorize them from user space. * FIXME -- complete doc * @authenticated: Crypto authentication passed + * @tunnel_mode: Connection native or tunneled over USB4 * @lpm_capable: device supports LPM * @lpm_devinit_allow: Allow USB3 device initiated LPM, exit latency is in range * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM @@ -719,6 +723,7 @@ struct usb_device { unsigned do_remote_wakeup:1; unsigned reset_resume:1; unsigned port_is_suspended:1; + enum usb_link_tunnel_mode tunnel_mode; int slot_id; struct usb2_lpm_parameters l1_params; @@ -810,10 +815,10 @@ static inline void usb_mark_last_busy(struct usb_device *udev) #else -static inline int usb_enable_autosuspend(struct usb_device *udev) -{ return 0; } -static inline int usb_disable_autosuspend(struct usb_device *udev) -{ return 0; } +static inline void usb_enable_autosuspend(struct usb_device *udev) +{ } +static inline void usb_disable_autosuspend(struct usb_device *udev) +{ } static inline int usb_autopm_get_interface(struct usb_interface *intf) { return 0; } @@ -1126,8 +1131,8 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) /* ----------------------------------------------------------------------- */ /* Stuff for dynamic usb ids */ +extern struct mutex usb_dynids_lock; struct usb_dynids { - spinlock_t lock; struct list_head list; }; @@ -1176,6 +1181,7 @@ extern ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf); * post_reset method is called. * @post_reset: Called by usb_reset_device() after the device * has been reset + * @shutdown: Called at shut-down time to quiesce the device. * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set * or your driver's probe function will never get called. @@ -1227,6 +1233,8 @@ struct usb_driver { int (*pre_reset)(struct usb_interface *intf); int (*post_reset)(struct usb_interface *intf); + void (*shutdown)(struct usb_interface *intf); + const struct usb_device_id *id_table; const struct attribute_group **dev_groups; @@ -1237,7 +1245,7 @@ struct usb_driver { unsigned int disable_hub_initiated_lpm:1; unsigned int soft_unbind:1; }; -#define to_usb_driver(d) container_of(d, struct usb_driver, driver) +#define to_usb_driver(d) container_of_const(d, struct usb_driver, driver) /** * struct usb_device_driver - identifies USB device driver to usbcore @@ -1288,8 +1296,7 @@ struct usb_device_driver { unsigned int supports_autosuspend:1; unsigned int generic_subclass:1; }; -#define to_usb_device_driver(d) container_of(d, struct usb_device_driver, \ - driver) +#define to_usb_device_driver(d) container_of_const(d, struct usb_device_driver, driver) /** * struct usb_class_driver - identifies a USB driver that wants to use the USB major number |