diff options
Diffstat (limited to 'tools/testing/selftests/drivers')
36 files changed, 3866 insertions, 9 deletions
diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile new file mode 100644 index 000000000000..e54f382bcb02 --- /dev/null +++ b/tools/testing/selftests/drivers/net/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 + +TEST_INCLUDES := $(wildcard lib/py/*.py) + +TEST_PROGS := \ + ping.py \ + queues.py \ + stats.py \ +# end of TEST_PROGS + +include ../../lib.mk diff --git a/tools/testing/selftests/drivers/net/README.rst b/tools/testing/selftests/drivers/net/README.rst new file mode 100644 index 000000000000..3b6a29e6564b --- /dev/null +++ b/tools/testing/selftests/drivers/net/README.rst @@ -0,0 +1,136 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Running driver tests +==================== + +Networking driver tests are executed within kselftest framework like any +other tests. They support testing both real device drivers and emulated / +software drivers (latter mostly to test the core parts of the stack). + +SW mode +~~~~~~~ + +By default, when no extra parameters are set or exported, tests execute +against software drivers such as netdevsim. No extra preparation is required +the software devices are created and destroyed as part of the test. +In this mode the tests are indistinguishable from other selftests and +(for example) can be run under ``virtme-ng`` like the core networking selftests. + +HW mode +~~~~~~~ + +Executing tests against a real device requires external preparation. +The netdevice against which tests will be run must exist, be running +(in UP state) and be configured with an IP address. + +Refer to list of :ref:`Variables` later in this file to set up running +the tests against a real device. + +Both modes required +~~~~~~~~~~~~~~~~~~~ + +All tests in drivers/net must support running both against a software device +and a real device. SW-only tests should instead be placed in net/ or +drivers/net/netdevsim, HW-only tests in drivers/net/hw. + +Variables +========= + +The variables can be set in the environment or by creating a net.config +file in the same directory as this README file. Example:: + + $ NETIF=eth0 ./some_test.sh + +or:: + + $ cat tools/testing/selftests/drivers/net/net.config + # Variable set in a file + NETIF=eth0 + +Local test (which don't require endpoint for sending / receiving traffic) +need only the ``NETIF`` variable. Remaining variables define the endpoint +and communication method. + +NETIF +~~~~~ + +Name of the netdevice against which the test should be executed. +When empty or not set software devices will be used. + +LOCAL_V4, LOCAL_V6, REMOTE_V4, REMOTE_V6 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Local and remote endpoint IP addresses. + +REMOTE_TYPE +~~~~~~~~~~~ + +Communication method used to run commands on the remote endpoint. +Test framework has built-in support for ``netns`` and ``ssh`` channels. +``netns`` assumes the "remote" interface is part of the same +host, just moved to the specified netns. +``ssh`` communicates with remote endpoint over ``ssh`` and ``scp``. +Using persistent SSH connections is strongly encouraged to avoid +the latency of SSH connection setup on every command. + +Communication methods are defined by classes in ``lib/py/remote_{name}.py``. +It should be possible to add a new method without modifying any of +the framework, by simply adding an appropriately named file to ``lib/py``. + +REMOTE_ARGS +~~~~~~~~~~~ + +Arguments used to construct the communication channel. +Communication channel dependent:: + + for netns - name of the "remote" namespace + for ssh - name/address of the remote host + +Example +======= + +Build the selftests:: + + # make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" + +"Install" the tests and copy them over to the target machine:: + + # make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \ + install INSTALL_PATH=/tmp/ksft-net-drv + + # rsync -ra --delete /tmp/ksft-net-drv root@192.168.1.1:/root/ + +On the target machine, running the tests will use netdevsim by default:: + + [/root] # ./ksft-net-drv/run_kselftest.sh -t drivers/net:ping.py + TAP version 13 + 1..1 + # timeout set to 45 + # selftests: drivers/net: ping.py + # KTAP version 1 + # 1..3 + # ok 1 ping.test_v4 + # ok 2 ping.test_v6 + # ok 3 ping.test_tcp + # # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 + ok 1 selftests: drivers/net: ping.py + +Create a config with remote info:: + + [/root] # cat > ./ksft-net-drv/drivers/net/net.config <<EOF + NETIF=eth0 + LOCAL_V4=192.168.1.1 + REMOTE_V4=192.168.1.2 + REMOTE_TYPE=ssh + REMOTE_ARGS=root@192.168.1.2 + EOF + +Run the test:: + + [/root] # ./ksft-net-drv/drivers/net/ping.py + KTAP version 1 + 1..3 + ok 1 ping.test_v4 + ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity + ok 3 ping.test_tcp + # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:1 error:0 diff --git a/tools/testing/selftests/drivers/net/config b/tools/testing/selftests/drivers/net/config new file mode 100644 index 000000000000..f6a58ce8a230 --- /dev/null +++ b/tools/testing/selftests/drivers/net/config @@ -0,0 +1,2 @@ +CONFIG_IPV6=y +CONFIG_NETDEVSIM=m diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile new file mode 100644 index 000000000000..4933d045ab66 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_PROGS = \ + csum.py \ + devlink_port_split.py \ + ethtool.sh \ + ethtool_extended_state.sh \ + ethtool_mm.sh \ + ethtool_rmon.sh \ + hw_stats_l3.sh \ + hw_stats_l3_gre.sh \ + loopback.sh \ + pp_alloc_fail.py \ + # + +TEST_FILES := \ + ethtool_lib.sh \ + # + +TEST_INCLUDES := \ + $(wildcard lib/py/*.py ../lib/py/*.py) \ + ../../../net/lib.sh \ + ../../../net/forwarding/lib.sh \ + ../../../net/forwarding/ipip_lib.sh \ + ../../../net/forwarding/tc_common.sh \ + # + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/hw/csum.py b/tools/testing/selftests/drivers/net/hw/csum.py new file mode 100755 index 000000000000..cb40497faee4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/csum.py @@ -0,0 +1,122 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +"""Run the tools/testing/selftests/net/csum testsuite.""" + +from os import path + +from lib.py import ksft_run, ksft_exit, KsftSkipEx +from lib.py import EthtoolFamily, NetDrvEpEnv +from lib.py import bkg, cmd, wait_port_listen + +def test_receive(cfg, ipv4=False, extra_args=None): + """Test local nic checksum receive. Remote host sends crafted packets.""" + if not cfg.have_rx_csum: + raise KsftSkipEx(f"Test requires rx checksum offload on {cfg.ifname}") + + if ipv4: + ip_args = f"-4 -S {cfg.remote_v4} -D {cfg.v4}" + else: + ip_args = f"-6 -S {cfg.remote_v6} -D {cfg.v6}" + + rx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -n 100 {ip_args} -r 1 -R {extra_args}" + tx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -n 100 {ip_args} -r 1 -T {extra_args}" + + with bkg(rx_cmd, exit_wait=True): + wait_port_listen(34000, proto="udp") + cmd(tx_cmd, host=cfg.remote) + + +def test_transmit(cfg, ipv4=False, extra_args=None): + """Test local nic checksum transmit. Remote host verifies packets.""" + if (not cfg.have_tx_csum_generic and + not (cfg.have_tx_csum_ipv4 and ipv4) and + not (cfg.have_tx_csum_ipv6 and not ipv4)): + raise KsftSkipEx(f"Test requires tx checksum offload on {cfg.ifname}") + + if ipv4: + ip_args = f"-4 -S {cfg.v4} -D {cfg.remote_v4}" + else: + ip_args = f"-6 -S {cfg.v6} -D {cfg.remote_v6}" + + # Cannot randomize input when calculating zero checksum + if extra_args != "-U -Z": + extra_args += " -r 1" + + rx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -L 1 -n 100 {ip_args} -R {extra_args}" + tx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -L 1 -n 100 {ip_args} -T {extra_args}" + + with bkg(rx_cmd, host=cfg.remote, exit_wait=True): + wait_port_listen(34000, proto="udp", host=cfg.remote) + cmd(tx_cmd) + + +def test_builder(name, cfg, ipv4=False, tx=False, extra_args=""): + """Construct specific tests from the common template. + + Most tests follow the same basic pattern, differing only in + Direction of the test and optional flags passed to csum.""" + def f(cfg): + if ipv4: + cfg.require_v4() + else: + cfg.require_v6() + + if tx: + test_transmit(cfg, ipv4, extra_args) + else: + test_receive(cfg, ipv4, extra_args) + + if ipv4: + f.__name__ = "ipv4_" + name + else: + f.__name__ = "ipv6_" + name + return f + + +def check_nic_features(cfg) -> None: + """Test whether Tx and Rx checksum offload are enabled. + + If the device under test has either off, then skip the relevant tests.""" + cfg.have_tx_csum_generic = False + cfg.have_tx_csum_ipv4 = False + cfg.have_tx_csum_ipv6 = False + cfg.have_rx_csum = False + + ethnl = EthtoolFamily() + features = ethnl.features_get({"header": {"dev-index": cfg.ifindex}}) + for f in features["active"]["bits"]["bit"]: + if f["name"] == "tx-checksum-ip-generic": + cfg.have_tx_csum_generic = True + elif f["name"] == "tx-checksum-ipv4": + cfg.have_tx_csum_ipv4 = True + elif f["name"] == "tx-checksum-ipv6": + cfg.have_tx_csum_ipv6 = True + elif f["name"] == "rx-checksum": + cfg.have_rx_csum = True + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + check_nic_features(cfg) + + cfg.bin_local = path.abspath(path.dirname(__file__) + "/../../../net/lib/csum") + cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) + + cases = [] + for ipv4 in [True, False]: + cases.append(test_builder("rx_tcp", cfg, ipv4, False, "-t")) + cases.append(test_builder("rx_tcp_invalid", cfg, ipv4, False, "-t -E")) + + cases.append(test_builder("rx_udp", cfg, ipv4, False, "")) + cases.append(test_builder("rx_udp_invalid", cfg, ipv4, False, "-E")) + + cases.append(test_builder("tx_udp_csum_offload", cfg, ipv4, True, "-U")) + cases.append(test_builder("tx_udp_zero_checksum", cfg, ipv4, True, "-U -Z")) + + ksft_run(cases=cases, args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/devlink_port_split.py b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py new file mode 100755 index 000000000000..2d84c7a0be6b --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py @@ -0,0 +1,309 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from subprocess import PIPE, Popen +import json +import time +import argparse +import collections +import sys + +# +# Test port split configuration using devlink-port lanes attribute. +# The test is skipped in case the attribute is not available. +# +# First, check that all the ports with 1 lane fail to split. +# Second, check that all the ports with more than 1 lane can be split +# to all valid configurations (e.g., split to 2, split to 4 etc.) +# + + +# Kselftest framework requirement - SKIP code is 4 +KSFT_SKIP=4 +Port = collections.namedtuple('Port', 'bus_info name') + + +def run_command(cmd, should_fail=False): + """ + Run a command in subprocess. + Return: Tuple of (stdout, stderr). + """ + + p = Popen(cmd, stdout=PIPE, stderr=PIPE, shell=True) + stdout, stderr = p.communicate() + stdout, stderr = stdout.decode(), stderr.decode() + + if stderr != "" and not should_fail: + print("Error sending command: %s" % cmd) + print(stdout) + print(stderr) + return stdout, stderr + + +class devlink_ports(object): + """ + Class that holds information on the devlink ports, required to the tests; + if_names: A list of interfaces in the devlink ports. + """ + + def get_if_names(dev): + """ + Get a list of physical devlink ports. + Return: Array of tuples (bus_info/port, if_name). + """ + + arr = [] + + cmd = "devlink -j port show" + stdout, stderr = run_command(cmd) + assert stderr == "" + ports = json.loads(stdout)['port'] + + validate_devlink_output(ports, 'flavour') + + for port in ports: + if dev in port: + if ports[port]['flavour'] == 'physical': + arr.append(Port(bus_info=port, name=ports[port]['netdev'])) + + return arr + + def __init__(self, dev): + self.if_names = devlink_ports.get_if_names(dev) + + +def get_max_lanes(port): + """ + Get the $port's maximum number of lanes. + Return: number of lanes, e.g. 1, 2, 4 and 8. + """ + + cmd = "devlink -j port show %s" % port + stdout, stderr = run_command(cmd) + assert stderr == "" + values = list(json.loads(stdout)['port'].values())[0] + + if 'lanes' in values: + lanes = values['lanes'] + else: + lanes = 0 + return lanes + + +def get_split_ability(port): + """ + Get the $port split ability. + Return: split ability, true or false. + """ + + cmd = "devlink -j port show %s" % port.name + stdout, stderr = run_command(cmd) + assert stderr == "" + values = list(json.loads(stdout)['port'].values())[0] + + return values['splittable'] + + +def split(k, port, should_fail=False): + """ + Split $port into $k ports. + If should_fail == True, the split should fail. Otherwise, should pass. + Return: Array of sub ports after splitting. + If the $port wasn't split, the array will be empty. + """ + + cmd = "devlink port split %s count %s" % (port.bus_info, k) + stdout, stderr = run_command(cmd, should_fail=should_fail) + + if should_fail: + if not test(stderr != "", "%s is unsplittable" % port.name): + print("split an unsplittable port %s" % port.name) + return create_split_group(port, k) + else: + if stderr == "": + return create_split_group(port, k) + print("didn't split a splittable port %s" % port.name) + + return [] + + +def unsplit(port): + """ + Unsplit $port. + """ + + cmd = "devlink port unsplit %s" % port + stdout, stderr = run_command(cmd) + test(stderr == "", "Unsplit port %s" % port) + + +def exists(port, dev): + """ + Check if $port exists in the devlink ports. + Return: True is so, False otherwise. + """ + + return any(dev_port.name == port + for dev_port in devlink_ports.get_if_names(dev)) + + +def exists_and_lanes(ports, lanes, dev): + """ + Check if every port in the list $ports exists in the devlink ports and has + $lanes number of lanes after splitting. + Return: True if both are True, False otherwise. + """ + + for port in ports: + max_lanes = get_max_lanes(port) + if not exists(port, dev): + print("port %s doesn't exist in devlink ports" % port) + return False + if max_lanes != lanes: + print("port %s has %d lanes, but %s were expected" + % (port, lanes, max_lanes)) + return False + return True + + +def test(cond, msg): + """ + Check $cond and print a message accordingly. + Return: True is pass, False otherwise. + """ + + if cond: + print("TEST: %-60s [ OK ]" % msg) + else: + print("TEST: %-60s [FAIL]" % msg) + + return cond + + +def create_split_group(port, k): + """ + Create the split group for $port. + Return: Array with $k elements, which are the split port group. + """ + + return list(port.name + "s" + str(i) for i in range(k)) + + +def split_unsplittable_port(port, k): + """ + Test that splitting of unsplittable port fails. + """ + + # split to max + new_split_group = split(k, port, should_fail=True) + + if new_split_group != []: + unsplit(port.bus_info) + + +def split_splittable_port(port, k, lanes, dev): + """ + Test that splitting of splittable port passes correctly. + """ + + new_split_group = split(k, port) + + # Once the split command ends, it takes some time to the sub ifaces' + # to get their names. Use udevadm to continue only when all current udev + # events are handled. + cmd = "udevadm settle" + stdout, stderr = run_command(cmd) + assert stderr == "" + + if new_split_group != []: + test(exists_and_lanes(new_split_group, lanes/k, dev), + "split port %s into %s" % (port.name, k)) + + unsplit(port.bus_info) + + +def validate_devlink_output(devlink_data, target_property=None): + """ + Determine if test should be skipped by checking: + 1. devlink_data contains values + 2. The target_property exist in devlink_data + """ + skip_reason = None + if any(devlink_data.values()): + if target_property: + skip_reason = "{} not found in devlink output, test skipped".format(target_property) + for key in devlink_data: + if target_property in devlink_data[key]: + skip_reason = None + else: + skip_reason = 'devlink output is empty, test skipped' + + if skip_reason: + print(skip_reason) + sys.exit(KSFT_SKIP) + + +def make_parser(): + parser = argparse.ArgumentParser(description='A test for port splitting.') + parser.add_argument('--dev', + help='The devlink handle of the device under test. ' + + 'The default is the first registered devlink ' + + 'handle.') + + return parser + + +def main(cmdline=None): + parser = make_parser() + args = parser.parse_args(cmdline) + + dev = args.dev + if not dev: + cmd = "devlink -j dev show" + stdout, stderr = run_command(cmd) + assert stderr == "" + + validate_devlink_output(json.loads(stdout)) + devs = json.loads(stdout)['dev'] + dev = list(devs.keys())[0] + + cmd = "devlink dev show %s" % dev + stdout, stderr = run_command(cmd) + if stderr != "": + print("devlink device %s can not be found" % dev) + sys.exit(1) + + ports = devlink_ports(dev) + + found_max_lanes = False + for port in ports.if_names: + max_lanes = get_max_lanes(port.name) + + # If max lanes is 0, do not test port splitting at all + if max_lanes == 0: + continue + + # If 1 lane, shouldn't be able to split + elif max_lanes == 1: + test(not get_split_ability(port), + "%s should not be able to split" % port.name) + split_unsplittable_port(port, max_lanes) + + # Else, splitting should pass and all the split ports should exist. + else: + lane = max_lanes + test(get_split_ability(port), + "%s should be able to split" % port.name) + while lane > 1: + split_splittable_port(port, lane, max_lanes, dev) + + lane //= 2 + found_max_lanes = True + + if not found_max_lanes: + print(f"Test not started, no port of device {dev} reports max_lanes") + sys.exit(KSFT_SKIP) + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/ethtool.sh b/tools/testing/selftests/drivers/net/hw/ethtool.sh new file mode 100755 index 000000000000..fa6953de6b6d --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool.sh @@ -0,0 +1,297 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + same_speeds_autoneg_off + different_speeds_autoneg_off + combination_of_neg_on_and_off + advertise_subset_of_speeds + check_highest_speed_is_chosen + different_speeds_autoneg_on +" +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source ethtool_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +same_speeds_autoneg_off() +{ + # Check that when each of the reported speeds is forced, the links come + # up and are operational. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + ethtool_set $h2 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "ping with speed $speed autoneg off" + log_test "force speed $speed on both ends" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_off() +{ + # Test that when we force different speeds, links are not up and ping + # fails. + RET=0 + + local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0)) + local speed1=${speeds_arr[0]} + local speed2=${speeds_arr[1]} + + ethtool_set $h1 speed $speed1 autoneg off + ethtool_set $h2 speed $speed2 autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds" + + log_test "force of different speeds autoneg off" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +combination_of_neg_on_and_off() +{ + # Test that when one device is forced to a speed supported by both + # endpoints and the other device is configured to autoneg on, the links + # are up and ping passes. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "ping with h1-speed=$speed autoneg off, h2 autoneg on" + log_test "force speed $speed vs. autoneg" + done + + ethtool -s $h1 autoneg on +} + +hex_speed_value_get() +{ + local speed=$1; shift + + local shift_size=${speed_values[$speed]} + speed=$((0x1 << $"shift_size")) + printf "%#x" "$speed" +} + +subset_of_common_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local adver=$1; shift + + local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver)) + local speed_to_advertise=0 + local speed_to_remove=${speeds_arr[0]} + speed_to_remove+='base' + + local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver)) + + for speed in ${speeds_mode_arr[@]}; do + if [[ $speed != $speed_to_remove* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +speed_to_advertise_get() +{ + # The function returns the hex number that is composed by OR-ing all + # the modes corresponding to the provided speed. + local speed_without_mode=$1; shift + local supported_speeds=("$@"); shift + local speed_to_advertise=0 + + speed_without_mode+='base' + + for speed in ${supported_speeds[@]}; do + if [[ $speed == $speed_without_mode* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +advertise_subset_of_speeds() +{ + # Test that when one device advertises a subset of speeds and another + # advertises a specific speed (but all modes of this speed), the links + # are up and ping passes. + RET=0 + + local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + ethtool_set $h1 advertise $speed_1_to_advertise + + if [ $RET != 0 ]; then + log_test "advertise subset of speeds" + return + fi + + local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1)) + # Check only speeds that h1 advertised. Remove the first speed. + unset speeds_arr_without_mode[0] + local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1)) + + for speed_value in ${speeds_arr_without_mode[@]}; do + RET=0 + local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \ + "${speeds_arr_with_mode[@]}") + ethtool_set $h2 advertise $speed_2_to_advertise + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "ping with h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)" + + log_test "advertise $speed_1_to_advertise vs. $speed_2_to_advertise" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +check_highest_speed_is_chosen() +{ + # Test that when one device advertises a subset of speeds, the other + # chooses the highest speed. This test checks configuration without + # traffic. + RET=0 + + local max_speed + local chosen_speed + local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + + ethtool_set $h1 advertise $speed_to_advertise + + if [ $RET != 0 ]; then + log_test "check highest speed" + return + fi + + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + + max_speed=${speeds_arr[0]} + for current in ${speeds_arr[@]}; do + if [[ $current -gt $max_speed ]]; then + max_speed=$current + fi + done + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + chosen_speed=$(ethtool $h1 | grep 'Speed:') + chosen_speed=${chosen_speed%"Mb/s"*} + chosen_speed=${chosen_speed#*"Speed: "} + ((chosen_speed == max_speed)) + check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed" + + log_test "check highest speed" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_on() +{ + # Test that when we configure links to advertise different speeds, + # links are not up and ping fails. + RET=0 + + local -a speeds=($(different_speeds_get $h1 $h2 1 1)) + local speed1=${speeds[0]} + local speed2=${speeds[1]} + + speed1=$(hex_speed_value_get $speed1) + speed2=$(hex_speed_value_get $speed2) + + ethtool_set $h1 advertise $speed1 + ethtool_set $h2 advertise $speed2 + + if (($RET)); then + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds autoneg on" + fi + + log_test "advertise different speeds autoneg on" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +declare -gA speed_values +eval "speed_values=($(speeds_arr_get))" + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh new file mode 100755 index 000000000000..a7584448416e --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh @@ -0,0 +1,116 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + autoneg + autoneg_force_mode + no_cable +" + +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source ethtool_lib.sh + +TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + swp3=$NETIF_NO_CABLE +} + +ethtool_ext_state() +{ + local dev=$1; shift + local expected_ext_state=$1; shift + local expected_ext_substate=${1:-""}; shift + + local ext_state=$(ethtool $dev | grep "Link detected" \ + | cut -d "(" -f2 | cut -d ")" -f1) + local ext_substate=$(echo $ext_state | cut -sd "," -f2 \ + | sed -e 's/^[[:space:]]*//') + ext_state=$(echo $ext_state | cut -d "," -f1) + + if [[ $ext_state != $expected_ext_state ]]; then + echo "Expected \"$expected_ext_state\", got \"$ext_state\"" + return 1 + fi + if [[ $ext_substate != $expected_ext_substate ]]; then + echo "Expected \"$expected_ext_substate\", got \"$ext_substate\"" + return 1 + fi +} + +autoneg() +{ + local msg + + RET=0 + + ip link set dev $swp1 up + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected") + check_err $? "$msg" + + log_test "Autoneg, No partner detected" + + ip link set dev $swp1 down +} + +autoneg_force_mode() +{ + local msg + + RET=0 + + ip link set dev $swp1 up + ip link set dev $swp2 up + + local -a speeds_arr=($(different_speeds_get $swp1 $swp2 0 0)) + local speed1=${speeds_arr[0]} + local speed2=${speeds_arr[1]} + + ethtool_set $swp1 speed $speed1 autoneg off + ethtool_set $swp2 speed $speed2 autoneg off + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" + + log_test "Autoneg, No partner detected during force mode" + + ethtool -s $swp2 autoneg on + ethtool -s $swp1 autoneg on + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +no_cable() +{ + local msg + + RET=0 + + ip link set dev $swp3 up + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable") + check_err $? "$msg" + + log_test "No cable" + + ip link set dev $swp3 down +} + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh new file mode 100644 index 000000000000..b9bfb45085af --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh @@ -0,0 +1,120 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +speeds_arr_get() +{ + cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \ + {sub(/,$/, "") \ + sub(/ETHTOOL_LINK_MODE_/,"") \ + sub(/_BIT/,"") \ + sub(/_Full/,"/Full") \ + sub(/_Half/,"/Half");\ + print "["$1"]="$3}' + + awk "${cmd}" /usr/include/linux/ethtool.h +} + +ethtool_set() +{ + local cmd="$@" + local out=$(ethtool -s $cmd 2>&1 | wc -l) + + check_err $out "error in configuration. $cmd" +} + +dev_linkmodes_params_get() +{ + local dev=$1; shift + local adver=$1; shift + local -a linkmodes_params + local param_count + local arr + + if (($adver)); then + mode="Advertised link modes" + else + mode="Supported link modes" + fi + + local -a dev_linkmodes=($(dev_speeds_get $dev 1 $adver)) + for ((i=0; i<${#dev_linkmodes[@]}; i++)); do + linkmodes_params[$i]=$(echo -e "${dev_linkmodes[$i]}" | \ + # Replaces all non numbers with spaces + sed -e 's/[^0-9]/ /g' | \ + # Squeeze spaces in sequence to 1 space + tr -s ' ') + # Count how many numbers were found in the linkmode + param_count=$(echo "${linkmodes_params[$i]}" | wc -w) + if [[ $param_count -eq 1 ]]; then + linkmodes_params[$i]="${linkmodes_params[$i]} 1" + elif [[ $param_count -ge 3 ]]; then + arr=(${linkmodes_params[$i]}) + # Take only first two params + linkmodes_params[$i]=$(echo "${arr[@]:0:2}") + fi + done + echo ${linkmodes_params[@]} +} + +dev_speeds_get() +{ + local dev=$1; shift + local with_mode=$1; shift + local adver=$1; shift + local speeds_str + + if (($adver)); then + mode="Advertised link modes" + else + mode="Supported link modes" + fi + + speeds_str=$(ethtool "$dev" | \ + # Snip everything before the link modes section. + sed -n '/'"$mode"':/,$p' | \ + # Quit processing the rest at the start of the next section. + # When checking, skip the header of this section (hence the 2,). + sed -n '2,${/^[\t][^ \t]/q};p' | \ + # Drop the section header of the current section. + cut -d':' -f2) + + local -a speeds_arr=($speeds_str) + if [[ $with_mode -eq 0 ]]; then + for ((i=0; i<${#speeds_arr[@]}; i++)); do + speeds_arr[$i]=${speeds_arr[$i]%base*} + done + fi + echo ${speeds_arr[@]} +} + +common_speeds_get() +{ + dev1=$1; shift + dev2=$1; shift + with_mode=$1; shift + adver=$1; shift + + local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver)) + local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver)) + + comm -12 \ + <(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \ + <(printf '%s\n' "${dev2_speeds[@]}" | sort -u) +} + +different_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local with_mode=$1; shift + local adver=$1; shift + + local -a speeds_arr + + speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver)) + if [[ ${#speeds_arr[@]} < 2 ]]; then + check_err 1 "cannot check different speeds. There are not enough speeds" + fi + + echo ${speeds_arr[0]} ${speeds_arr[1]} +} diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh new file mode 100755 index 000000000000..c301e735c8ab --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh @@ -0,0 +1,341 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + manual_with_verification_h1_to_h2 + manual_with_verification_h2_to_h1 + manual_without_verification_h1_to_h2 + manual_without_verification_h2_to_h1 + manual_failed_verification_h1_to_h2 + manual_failed_verification_h2_to_h1 + lldp +" + +NUM_NETIFS=2 +REQUIRE_MZ=no +PREEMPTIBLE_PRIO=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +traffic_test() +{ + local if=$1; shift + local src=$1; shift + local num_pkts=10000 + local before= + local after= + local delta= + + if [ ${has_pmac_stats[$if]} = false ]; then + src="aggregate" + fi + + before=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + $MZ $if -q -c $num_pkts -p 64 -b bcast -t ip -R $PREEMPTIBLE_PRIO + + after=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + delta=$((after - before)) + + # Allow an extra 1% tolerance for random packets sent by the stack + [ $delta -ge $num_pkts ] && [ $delta -le $((num_pkts + 100)) ] +} + +manual_with_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + # It isn't completely clear from IEEE 802.3-2018 Figure 99-5: Transmit + # Processing state diagram whether the "send_r" variable (send response + # to verification frame) should be taken into consideration while the + # MAC Merge TX direction is disabled. That being said, at least the + # NXP ENETC does not, and requires tx-enabled on in order to respond to + # the link partner's verification frames. + ethtool --set-mm $rx tx-enabled on + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to finish + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_err "$?" "Verification did not succeed" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx tx-enabled off + + log_test "Manual configuration with verification: $tx to $rx" +} + +manual_with_verification_h1_to_h2() +{ + manual_with_verification $h1 $h2 +} + +manual_with_verification_h2_to_h1() +{ + manual_with_verification $h2 $h1 +} + +manual_without_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $tx verify-enabled off tx-enabled on + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'DISABLED' + check_err "$?" "Verification is not disabled" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + + log_test "Manual configuration without verification: $tx to $rx" +} + +manual_without_verification_h1_to_h2() +{ + manual_without_verification $h1 $h2 +} + +manual_without_verification_h2_to_h1() +{ + manual_without_verification $h2 $h1 +} + +manual_failed_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $rx pmac-enabled off + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to time out + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_fail "$?" "Verification succeeded when it shouldn't have" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_fail "$?" "pMAC TX is active when it shouldn't have" + + traffic_test $tx "emac" + check_err "$?" "Traffic did not get sent through $tx's eMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx pmac-enabled on + + log_test "Manual configuration with failed verification: $tx to $rx" +} + +manual_failed_verification_h1_to_h2() +{ + manual_failed_verification $h1 $h2 +} + +manual_failed_verification_h2_to_h1() +{ + manual_failed_verification $h2 $h1 +} + +smallest_supported_add_frag_size() +{ + local iface=$1 + local rx_min_frag_size= + + rx_min_frag_size=$(ethtool --json --show-mm $iface | \ + jq '.[]."rx-min-frag-size"') + + if [ $rx_min_frag_size -le 60 ]; then + echo 0 + elif [ $rx_min_frag_size -le 124 ]; then + echo 1 + elif [ $rx_min_frag_size -le 188 ]; then + echo 2 + elif [ $rx_min_frag_size -le 252 ]; then + echo 3 + else + echo "$iface: RX min frag size $rx_min_frag_size cannot be advertised over LLDP" + exit 1 + fi +} + +expected_add_frag_size() +{ + local iface=$1 + local requested=$2 + local min=$(smallest_supported_add_frag_size $iface) + + [ $requested -le $min ] && echo $min || echo $requested +} + +lldp_change_add_frag_size() +{ + local add_frag_size=$1 + local pattern= + + lldptool -T -i $h1 -V addEthCaps addFragSize=$add_frag_size >/dev/null + # Wait for TLVs to be received + sleep 2 + pattern=$(printf "Additional fragment size: %d" \ + $(expected_add_frag_size $h1 $add_frag_size)) + lldptool -i $h2 -t -n -V addEthCaps | grep -q "$pattern" +} + +lldp() +{ + RET=0 + + systemctl start lldpad + + # Configure the interfaces to receive and transmit LLDPDUs + lldptool -L -i $h1 adminStatus=rxtx >/dev/null + lldptool -L -i $h2 adminStatus=rxtx >/dev/null + + # Enable the transmission of Additional Ethernet Capabilities TLV + lldptool -T -i $h1 -V addEthCaps enableTx=yes >/dev/null + lldptool -T -i $h2 -V addEthCaps enableTx=yes >/dev/null + + # Wait for TLVs to be received + sleep 2 + + lldptool -i $h1 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h1 pMAC TX is not active" + + lldptool -i $h2 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h2 pMAC TX is not active" + + lldp_change_add_frag_size 3 + check_err "$?" "addFragSize 3" + + lldp_change_add_frag_size 2 + check_err "$?" "addFragSize 2" + + lldp_change_add_frag_size 1 + check_err "$?" "addFragSize 1" + + lldp_change_add_frag_size 0 + check_err "$?" "addFragSize 0" + + traffic_test $h1 "pmac" + check_err "$?" "Traffic did not get sent through $h1's pMAC" + + traffic_test $h2 "pmac" + check_err "$?" "Traffic did not get sent through $h2's pMAC" + + systemctl stop lldpad + + log_test "LLDP" +} + +h1_create() +{ + ip link set dev $h1 up + + tc qdisc add dev $h1 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 + + ethtool --set-mm $h1 pmac-enabled on tx-enabled off verify-enabled off +} + +h2_create() +{ + ip link set dev $h2 up + + ethtool --set-mm $h2 pmac-enabled on tx-enabled off verify-enabled off + + tc qdisc add dev $h2 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 +} + +h1_destroy() +{ + ethtool --set-mm $h1 pmac-enabled off tx-enabled off verify-enabled off + + tc qdisc del dev $h1 root + + ip link set dev $h1 down +} + +h2_destroy() +{ + tc qdisc del dev $h2 root + + ethtool --set-mm $h2 pmac-enabled off tx-enabled off verify-enabled off + + ip link set dev $h2 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +check_ethtool_mm_support +check_tc_fp_support +require_command lldptool +bail_on_lldpad "autoconfigure the MAC Merge layer" "configure it manually" + +for netif in ${NETIFS[@]}; do + ethtool --show-mm $netif 2>&1 &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: $netif does not support MAC Merge" + exit $ksft_skip + fi + + if check_ethtool_pmac_std_stats_support $netif eth-mac; then + has_pmac_stats[$netif]=true + else + has_pmac_stats[$netif]=false + echo "$netif does not report pMAC statistics, falling back to aggregate" + fi +done + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh new file mode 100755 index 000000000000..8f60c1685ad4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh @@ -0,0 +1,145 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + rmon_rx_histogram + rmon_tx_histogram +" + +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +ETH_FCS_LEN=4 +ETH_HLEN=$((6+6+2)) + +declare -A netif_mtu + +ensure_mtu() +{ + local iface=$1; shift + local len=$1; shift + local current=$(ip -j link show dev $iface | jq -r '.[0].mtu') + local required=$((len - ETH_HLEN - ETH_FCS_LEN)) + + if [ $current -lt $required ]; then + ip link set dev $iface mtu $required || return 1 + fi +} + +bucket_test() +{ + local iface=$1; shift + local neigh=$1; shift + local set=$1; shift + local bucket=$1; shift + local len=$1; shift + local num_rx=10000 + local num_tx=20000 + local expected= + local before= + local after= + local delta= + + # Mausezahn does not include FCS bytes in its length - but the + # histogram counters do + len=$((len - ETH_FCS_LEN)) + len=$((len > 0 ? len : 0)) + + before=$(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") + + # Send 10k one way and 20k in the other, to detect counters + # mapped to the wrong direction + $MZ $neigh -q -c $num_rx -p $len -a own -b bcast -d 10us + $MZ $iface -q -c $num_tx -p $len -a own -b bcast -d 10us + + after=$(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") + + delta=$((after - before)) + + expected=$([ $set = rx ] && echo $num_rx || echo $num_tx) + + # Allow some extra tolerance for other packets sent by the stack + [ $delta -ge $expected ] && [ $delta -le $((expected + 100)) ] +} + +rmon_histogram() +{ + local iface=$1; shift + local neigh=$1; shift + local set=$1; shift + local nbuckets=0 + local step= + + RET=0 + + while read -r -a bucket; do + step="$set-pkts${bucket[0]}to${bucket[1]} on $iface" + + for if in $iface $neigh; do + if ! ensure_mtu $if ${bucket[0]}; then + log_test_xfail "$if does not support the required MTU for $step" + return + fi + done + + if ! bucket_test $iface $neigh $set $nbuckets ${bucket[0]}; then + check_err 1 "$step failed" + return 1 + fi + log_test "$step" + nbuckets=$((nbuckets + 1)) + done < <(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][]|[.low, .high]|@tsv" 2>/dev/null) + + if [ $nbuckets -eq 0 ]; then + log_test_xfail "$iface does not support $set histogram counters" + return + fi +} + +rmon_rx_histogram() +{ + rmon_histogram $h1 $h2 rx + rmon_histogram $h2 $h1 rx +} + +rmon_tx_histogram() +{ + rmon_histogram $h1 $h2 tx + rmon_histogram $h2 $h1 tx +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + for iface in $h1 $h2; do + netif_mtu[$iface]=$(ip -j link show dev $iface | jq -r '.[0].mtu') + ip link set dev $iface up + done +} + +cleanup() +{ + pre_cleanup + + for iface in $h2 $h1; do + ip link set dev $iface \ + mtu ${netif_mtu[$iface]} \ + down + done +} + +check_ethtool_counter_group_support +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh new file mode 100755 index 000000000000..67fafefc80be --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh @@ -0,0 +1,334 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +--------------------+ +----------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.200 + | | + $h2.200 | +# | 192.0.2.1/28 | | | | 192.0.2.18/28 | +# | 2001:db8:1::1/64 | | | | 2001:db8:2::1/64 | +# | | | | | | +# | $h1 + | | + $h2 | +# | | | | | | +# +------------------|-+ +-|--------------------+ +# | | +# +------------------|-------------------------|--------------------+ +# | SW | | | +# | | | | +# | $rp1 + + $rp2 | +# | | | | +# | $rp1.200 + + $rp2.200 | +# | 192.0.2.2/28 192.0.2.17/28 | +# | 2001:db8:1::2/64 2001:db8:2::2/64 | +# | | +# +-----------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + ping_ipv6 + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + respin_enablement + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + reapply_config + ping_ipv4 + ping_ipv6 + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + test_stats_report_rx + test_stats_report_tx + test_destroy_enabled + test_double_enable +" +NUM_NETIFS=4 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source "$lib_dir"/../../../net/forwarding/tc_common.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64 + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + vlan_destroy $h1 200 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64 + ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 + ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 + ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 + vlan_destroy $h2 200 + simple_if_fini $h2 +} + +router_rp1_200_create() +{ + ip link add name $rp1.200 link $rp1 type vlan id 200 + ip link set dev $rp1.200 addrgenmode eui64 + ip link set dev $rp1.200 up + ip address add dev $rp1.200 192.0.2.2/28 + ip address add dev $rp1.200 2001:db8:1::2/64 + ip stats set dev $rp1.200 l3_stats on +} + +router_rp1_200_destroy() +{ + ip stats set dev $rp1.200 l3_stats off + ip address del dev $rp1.200 2001:db8:1::2/64 + ip address del dev $rp1.200 192.0.2.2/28 + ip link del dev $rp1.200 +} + +router_create() +{ + ip link set dev $rp1 up + router_rp1_200_create + + ip link set dev $rp2 up + vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64 +} + +router_destroy() +{ + vlan_destroy $rp2 200 + ip link set dev $rp2 down + + router_rp1_200_destroy + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1mac=$(mac_get $rp1) + rp2mac=$(mac_get $rp2) + + vrf_prepare + + h1_create + h2_create + + router_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1.200 192.0.2.18 " IPv4" +} + +ping_ipv6() +{ + ping_test $h1.200 2001:db8:2::1 " IPv6" +} + +send_packets_rx_ipv4() +{ + # Send 21 packets instead of 20, because the first one might trap and go + # through the SW datapath, which might not bump the HW counter. + $MZ $h1.200 -c 21 -d 20msec -p 100 \ + -a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_rx_ipv6() +{ + $MZ $h1.200 -6 -c 21 -d 20msec -p 100 \ + -a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_tx_ipv4() +{ + $MZ $h2.200 -c 21 -d 20msec -p 100 \ + -a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_tx_ipv6() +{ + $MZ $h2.200 -6 -c 21 -d 20msec -p 100 \ + -a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \ + -q -t udp sp=54321,dp=12345 +} + +___test_stats() +{ + local dir=$1; shift + local prot=$1; shift + + local a + local b + + a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) + send_packets_${dir}_${prot} + "$@" + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $rp1.200 ${dir} packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" +} + +__test_stats() +{ + local dir=$1; shift + local prot=$1; shift + + RET=0 + ___test_stats "$dir" "$prot" + log_test "Test $dir packets: $prot" +} + +test_stats_rx_ipv4() +{ + __test_stats rx ipv4 +} + +test_stats_tx_ipv4() +{ + __test_stats tx ipv4 +} + +test_stats_rx_ipv6() +{ + __test_stats rx ipv6 +} + +test_stats_tx_ipv6() +{ + __test_stats tx ipv6 +} + +# Make sure everything works well even after stats have been disabled and +# reenabled on the same device without touching the L3 configuration. +respin_enablement() +{ + log_info "Turning stats off and on again" + ip stats set dev $rp1.200 l3_stats off + ip stats set dev $rp1.200 l3_stats on +} + +# For the initial run, l3_stats is enabled on a completely set up netdevice. Now +# do it the other way around: enabling the L3 stats on an L2 netdevice, and only +# then apply the L3 configuration. +reapply_config() +{ + log_info "Reapplying configuration" + + router_rp1_200_destroy + + ip link add name $rp1.200 link $rp1 type vlan id 200 + ip link set dev $rp1.200 addrgenmode none + ip stats set dev $rp1.200 l3_stats on + ip link set dev $rp1.200 addrgenmode eui64 + ip link set dev $rp1.200 up + ip address add dev $rp1.200 192.0.2.2/28 + ip address add dev $rp1.200 2001:db8:1::2/64 +} + +__test_stats_report() +{ + local dir=$1; shift + local prot=$1; shift + + local a + local b + + RET=0 + + a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) + send_packets_${dir}_${prot} + ip address flush dev $rp1.200 + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $rp1.200 ${dir} packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" + log_test "Test ${dir} packets: stats pushed on loss of L3" + + ip stats set dev $rp1.200 l3_stats off + ip link del dev $rp1.200 + router_rp1_200_create +} + +test_stats_report_rx() +{ + __test_stats_report rx ipv4 +} + +test_stats_report_tx() +{ + __test_stats_report tx ipv4 +} + +test_destroy_enabled() +{ + RET=0 + + ip link del dev $rp1.200 + router_rp1_200_create + + log_test "Destroy l3_stats-enabled netdev" +} + +test_double_enable() +{ + RET=0 + ___test_stats rx ipv4 \ + ip stats set dev $rp1.200 l3_stats on + log_test "Test stat retention across a spurious enablement" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info | + jq '.[].info.l3_stats.used') +[[ $used = true ]] +check_err $? "hw_stats_info.used=$used" +log_test "l3_stats offloaded" +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh new file mode 100755 index 000000000000..a94d92e1abce --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh @@ -0,0 +1,111 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test L3 stats on IP-in-IP GRE tunnel without key. + +# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more +# details. + +ALL_TESTS=" + ping_ipv4 + test_stats_rx + test_stats_tx +" +NUM_NETIFS=6 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source "$lib_dir"/../../../net/forwarding/ipip_lib.sh +source "$lib_dir"/../../../net/forwarding/tc_common.sh + +setup_prepare() +{ + h1=${NETIFS[p1]} + ol1=${NETIFS[p2]} + + ul1=${NETIFS[p3]} + ul2=${NETIFS[p4]} + + ol2=${NETIFS[p5]} + h2=${NETIFS[p6]} + + ol1mac=$(mac_get $ol1) + + forwarding_enable + vrf_prepare + h1_create + h2_create + sw1_flat_create gre $ol1 $ul1 + sw2_flat_create gre $ol2 $ul2 + ip stats set dev g1a l3_stats on + ip stats set dev g2a l3_stats on +} + +cleanup() +{ + pre_cleanup + + ip stats set dev g1a l3_stats off + ip stats set dev g2a l3_stats off + + sw2_flat_destroy $ol2 $ul2 + sw1_flat_destroy $ol1 $ul1 + h2_destroy + h1_destroy + + vrf_cleanup + forwarding_restore +} + +ping_ipv4() +{ + RET=0 + + ping_test $h1 192.0.2.18 " gre flat" +} + +send_packets_ipv4() +{ + # Send 21 packets instead of 20, because the first one might trap and go + # through the SW datapath, which might not bump the HW counter. + $MZ $h1 -c 21 -d 20msec -p 100 \ + -a own -b $ol1mac -A 192.0.2.1 -B 192.0.2.18 \ + -q -t udp sp=54321,dp=12345 +} + +test_stats() +{ + local dev=$1; shift + local dir=$1; shift + + local a + local b + + RET=0 + + a=$(hw_stats_get l3_stats $dev $dir packets) + send_packets_ipv4 + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $dev $dir packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" + + log_test "Test $dir packets: $prot" +} + +test_stats_tx() +{ + test_stats g1a tx +} + +test_stats_rx() +{ + test_stats g2a rx +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py new file mode 100644 index 000000000000..b582885786f5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 + +import sys +from pathlib import Path + +KSFT_DIR = (Path(__file__).parent / "../../../../..").resolve() + +try: + sys.path.append(KSFT_DIR.as_posix()) + from net.lib.py import * + from drivers.net.lib.py import * +except ModuleNotFoundError as e: + ksft_pr("Failed importing `net` library from kernel sources") + ksft_pr(str(e)) + ktap_result(True, comment="SKIP") + sys.exit(4) diff --git a/tools/testing/selftests/drivers/net/hw/loopback.sh b/tools/testing/selftests/drivers/net/hw/loopback.sh new file mode 100755 index 000000000000..5acc3ff820aa --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/loopback.sh @@ -0,0 +1,103 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +ALL_TESTS="loopback_test" +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/tc_common.sh +source "$lib_dir"/../../../net/forwarding/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + tc qdisc add dev $h1 clsact +} + +h1_destroy() +{ + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +loopback_test() +{ + RET=0 + + tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \ + skip_hw arp_op reply arp_tip 192.0.2.1 action drop + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_fail $? "Matched on a filter without loopback setup" + + ethtool -K $h1 loopback on + check_err $? "Failed to enable loopback" + + setup_wait_dev $h1 + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_err $? "Did not match on filter with loopback" + + ethtool -K $h1 loopback off + check_err $? "Failed to disable loopback" + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 2 + check_fail $? "Matched on a filter after loopback was removed" + + tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower + + log_test "loopback" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + h1_create + h2_create + + if ethtool -k $h1 | grep loopback | grep -q fixed; then + log_test "SKIP: dev $h1 does not support loopback feature" + exit $ksft_skip + fi +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py new file mode 100755 index 000000000000..026d98976c35 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py @@ -0,0 +1,129 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import time +import os +from lib.py import ksft_run, ksft_exit, ksft_pr +from lib.py import KsftSkipEx, KsftFailEx +from lib.py import NetdevFamily, NlError +from lib.py import NetDrvEpEnv +from lib.py import cmd, tool, GenerateTraffic + + +def _write_fail_config(config): + for key, value in config.items(): + with open("/sys/kernel/debug/fail_function/" + key, "w") as fp: + fp.write(str(value) + "\n") + + +def _enable_pp_allocation_fail(): + if not os.path.exists("/sys/kernel/debug/fail_function"): + raise KsftSkipEx("Kernel built without function error injection (or DebugFS)") + + if not os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"): + with open("/sys/kernel/debug/fail_function/inject", "w") as fp: + fp.write("page_pool_alloc_pages\n") + + _write_fail_config({ + "verbose": 0, + "interval": 511, + "probability": 100, + "times": -1, + }) + + +def _disable_pp_allocation_fail(): + if not os.path.exists("/sys/kernel/debug/fail_function"): + return + + if os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"): + with open("/sys/kernel/debug/fail_function/inject", "w") as fp: + fp.write("\n") + + _write_fail_config({ + "probability": 0, + "times": 0, + }) + + +def test_pp_alloc(cfg, netdevnl): + def get_stats(): + return netdevnl.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0] + + def check_traffic_flowing(): + stat1 = get_stats() + time.sleep(1) + stat2 = get_stats() + if stat2['rx-packets'] - stat1['rx-packets'] < 15000: + raise KsftFailEx("Traffic seems low:", stat2['rx-packets'] - stat1['rx-packets']) + + + try: + stats = get_stats() + except NlError as e: + if e.nl_msg.error == -95: + stats = {} + else: + raise + if 'rx-alloc-fail' not in stats: + raise KsftSkipEx("Driver does not report 'rx-alloc-fail' via qstats") + + set_g = False + traffic = None + try: + traffic = GenerateTraffic(cfg) + + check_traffic_flowing() + + _enable_pp_allocation_fail() + + s1 = get_stats() + time.sleep(3) + s2 = get_stats() + + if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 1: + raise KsftSkipEx("Allocation failures not increasing") + if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 100: + raise KsftSkipEx("Allocation increasing too slowly", s2['rx-alloc-fail'] - s1['rx-alloc-fail'], + "packets:", s2['rx-packets'] - s1['rx-packets']) + + # Basic failures are fine, try to wobble some settings to catch extra failures + check_traffic_flowing() + g = tool("ethtool", "-g " + cfg.ifname, json=True)[0] + if 'rx' in g and g["rx"] * 2 <= g["rx-max"]: + new_g = g['rx'] * 2 + elif 'rx' in g: + new_g = g['rx'] // 2 + else: + new_g = None + + if new_g: + set_g = cmd(f"ethtool -G {cfg.ifname} rx {new_g}", fail=False).ret == 0 + if set_g: + ksft_pr("ethtool -G change retval: success") + else: + ksft_pr("ethtool -G change retval: did not succeed", new_g) + else: + ksft_pr("ethtool -G change retval: did not try") + + time.sleep(0.1) + check_traffic_flowing() + finally: + _disable_pp_allocation_fail() + if traffic: + traffic.stop() + time.sleep(0.1) + if set_g: + cmd(f"ethtool -G {cfg.ifname} rx {g['rx']}") + + +def main() -> None: + netdevnl = NetdevFamily() + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + + ksft_run([test_pp_alloc], args=(cfg, netdevnl, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/settings b/tools/testing/selftests/drivers/net/hw/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/settings @@ -0,0 +1 @@ +timeout=0 diff --git a/tools/testing/selftests/drivers/net/lib/py/__init__.py b/tools/testing/selftests/drivers/net/lib/py/__init__.py new file mode 100644 index 000000000000..401e70f7f136 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/__init__.py @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 + +import sys +from pathlib import Path + +KSFT_DIR = (Path(__file__).parent / "../../../..").resolve() + +try: + sys.path.append(KSFT_DIR.as_posix()) + from net.lib.py import * +except ModuleNotFoundError as e: + ksft_pr("Failed importing `net` library from kernel sources") + ksft_pr(str(e)) + ktap_result(True, comment="SKIP") + sys.exit(4) + +from .env import * +from .load import * +from .remote import Remote diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py new file mode 100644 index 000000000000..edcedd7bffab --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +from pathlib import Path +from lib.py import KsftSkipEx, KsftXfailEx +from lib.py import cmd, ip +from lib.py import NetNS, NetdevSimDev +from .remote import Remote + + +def _load_env_file(src_path): + env = os.environ.copy() + + src_dir = Path(src_path).parent.resolve() + if not (src_dir / "net.config").exists(): + return env + + with open((src_dir / "net.config").as_posix(), 'r') as fp: + for line in fp.readlines(): + full_file = line + # Strip comments + pos = line.find("#") + if pos >= 0: + line = line[:pos] + line = line.strip() + if not line: + continue + pair = line.split('=', maxsplit=1) + if len(pair) != 2: + raise Exception("Can't parse configuration line:", full_file) + env[pair[0]] = pair[1] + return env + + +class NetDrvEnv: + """ + Class for a single NIC / host env, with no remote end + """ + def __init__(self, src_path, **kwargs): + self._ns = None + + self.env = _load_env_file(src_path) + + if 'NETIF' in self.env: + self.dev = ip("link show dev " + self.env['NETIF'], json=True)[0] + else: + self._ns = NetdevSimDev(**kwargs) + self.dev = self._ns.nsims[0].dev + self.ifindex = self.dev['ifindex'] + + def __enter__(self): + ip(f"link set dev {self.dev['ifname']} up") + + return self + + def __exit__(self, ex_type, ex_value, ex_tb): + """ + __exit__ gets called at the end of a "with" block. + """ + self.__del__() + + def __del__(self): + if self._ns: + self._ns.remove() + self._ns = None + + +class NetDrvEpEnv: + """ + Class for an environment with a local device and "remote endpoint" + which can be used to send traffic in. + + For local testing it creates two network namespaces and a pair + of netdevsim devices. + """ + + # Network prefixes used for local tests + nsim_v4_pfx = "192.0.2." + nsim_v6_pfx = "2001:db8::" + + def __init__(self, src_path, nsim_test=None): + + self.env = _load_env_file(src_path) + + # Things we try to destroy + self.remote = None + # These are for local testing state + self._netns = None + self._ns = None + self._ns_peer = None + + if "NETIF" in self.env: + if nsim_test is True: + raise KsftXfailEx("Test only works on netdevsim") + self._check_env() + + self.dev = ip("link show dev " + self.env['NETIF'], json=True)[0] + + self.v4 = self.env.get("LOCAL_V4") + self.v6 = self.env.get("LOCAL_V6") + self.remote_v4 = self.env.get("REMOTE_V4") + self.remote_v6 = self.env.get("REMOTE_V6") + kind = self.env["REMOTE_TYPE"] + args = self.env["REMOTE_ARGS"] + else: + if nsim_test is False: + raise KsftXfailEx("Test does not work on netdevsim") + + self.create_local() + + self.dev = self._ns.nsims[0].dev + + self.v4 = self.nsim_v4_pfx + "1" + self.v6 = self.nsim_v6_pfx + "1" + self.remote_v4 = self.nsim_v4_pfx + "2" + self.remote_v6 = self.nsim_v6_pfx + "2" + kind = "netns" + args = self._netns.name + + self.remote = Remote(kind, args, src_path) + + self.addr = self.v6 if self.v6 else self.v4 + self.remote_addr = self.remote_v6 if self.remote_v6 else self.remote_v4 + + self.addr_ipver = "6" if self.v6 else "4" + # Bracketed addresses, some commands need IPv6 to be inside [] + self.baddr = f"[{self.v6}]" if self.v6 else self.v4 + self.remote_baddr = f"[{self.remote_v6}]" if self.remote_v6 else self.remote_v4 + + self.ifname = self.dev['ifname'] + self.ifindex = self.dev['ifindex'] + + self._required_cmd = {} + + def create_local(self): + self._netns = NetNS() + self._ns = NetdevSimDev() + self._ns_peer = NetdevSimDev(ns=self._netns) + + with open("/proc/self/ns/net") as nsfd0, \ + open("/var/run/netns/" + self._netns.name) as nsfd1: + ifi0 = self._ns.nsims[0].ifindex + ifi1 = self._ns_peer.nsims[0].ifindex + NetdevSimDev.ctrl_write('link_device', + f'{nsfd0.fileno()}:{ifi0} {nsfd1.fileno()}:{ifi1}') + + ip(f" addr add dev {self._ns.nsims[0].ifname} {self.nsim_v4_pfx}1/24") + ip(f"-6 addr add dev {self._ns.nsims[0].ifname} {self.nsim_v6_pfx}1/64 nodad") + ip(f" link set dev {self._ns.nsims[0].ifname} up") + + ip(f" addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v4_pfx}2/24", ns=self._netns) + ip(f"-6 addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v6_pfx}2/64 nodad", ns=self._netns) + ip(f" link set dev {self._ns_peer.nsims[0].ifname} up", ns=self._netns) + + def _check_env(self): + vars_needed = [ + ["LOCAL_V4", "LOCAL_V6"], + ["REMOTE_V4", "REMOTE_V6"], + ["REMOTE_TYPE"], + ["REMOTE_ARGS"] + ] + missing = [] + + for choice in vars_needed: + for entry in choice: + if entry in self.env: + break + else: + missing.append(choice) + # Make sure v4 / v6 configs are symmetric + if ("LOCAL_V6" in self.env) != ("REMOTE_V6" in self.env): + missing.append(["LOCAL_V6", "REMOTE_V6"]) + if ("LOCAL_V4" in self.env) != ("REMOTE_V4" in self.env): + missing.append(["LOCAL_V4", "REMOTE_V4"]) + if missing: + raise Exception("Invalid environment, missing configuration:", missing, + "Please see tools/testing/selftests/drivers/net/README.rst") + + def __enter__(self): + return self + + def __exit__(self, ex_type, ex_value, ex_tb): + """ + __exit__ gets called at the end of a "with" block. + """ + self.__del__() + + def __del__(self): + if self._ns: + self._ns.remove() + self._ns = None + if self._ns_peer: + self._ns_peer.remove() + self._ns_peer = None + if self._netns: + del self._netns + self._netns = None + if self.remote: + del self.remote + self.remote = None + + def require_v4(self): + if not self.v4 or not self.remote_v4: + raise KsftSkipEx("Test requires IPv4 connectivity") + + def require_v6(self): + if not self.v6 or not self.remote_v6: + raise KsftSkipEx("Test requires IPv6 connectivity") + + def _require_cmd(self, comm, key, host=None): + cached = self._required_cmd.get(comm, {}) + if cached.get(key) is None: + cached[key] = cmd("command -v -- " + comm, fail=False, + shell=True, host=host).ret == 0 + self._required_cmd[comm] = cached + return cached[key] + + def require_cmd(self, comm, local=True, remote=False): + if local: + if not self._require_cmd(comm, "local"): + raise KsftSkipEx("Test requires command: " + comm) + if remote: + if not self._require_cmd(comm, "remote"): + raise KsftSkipEx("Test requires (remote) command: " + comm) diff --git a/tools/testing/selftests/drivers/net/lib/py/load.py b/tools/testing/selftests/drivers/net/lib/py/load.py new file mode 100644 index 000000000000..abdb677bdb1c --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/load.py @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 + +import time + +from lib.py import ksft_pr, cmd, ip, rand_port, wait_port_listen + +class GenerateTraffic: + def __init__(self, env): + env.require_cmd("iperf3", remote=True) + + self.env = env + + port = rand_port() + self._iperf_server = cmd(f"iperf3 -s -p {port}", background=True) + wait_port_listen(port) + time.sleep(0.1) + self._iperf_client = cmd(f"iperf3 -c {env.addr} -P 16 -p {port} -t 86400", + background=True, host=env.remote) + + # Wait for traffic to ramp up + pkt = ip("-s link show dev " + env.ifname, json=True)[0]["stats64"]["rx"]["packets"] + for _ in range(50): + time.sleep(0.1) + now = ip("-s link show dev " + env.ifname, json=True)[0]["stats64"]["rx"]["packets"] + if now - pkt > 1000: + return + pkt = now + self.stop(verbose=True) + raise Exception("iperf3 traffic did not ramp up") + + def stop(self, verbose=None): + self._iperf_client.process(terminate=True) + if verbose: + ksft_pr(">> Client:") + ksft_pr(self._iperf_client.stdout) + ksft_pr(self._iperf_client.stderr) + self._iperf_server.process(terminate=True) + if verbose: + ksft_pr(">> Server:") + ksft_pr(self._iperf_server.stdout) + ksft_pr(self._iperf_server.stderr) diff --git a/tools/testing/selftests/drivers/net/lib/py/remote.py b/tools/testing/selftests/drivers/net/lib/py/remote.py new file mode 100644 index 000000000000..b1780b987722 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/remote.py @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +import importlib + +_modules = {} + +def Remote(kind, args, src_path): + global _modules + + if kind not in _modules: + _modules[kind] = importlib.import_module("..remote_" + kind, __name__) + + dir_path = os.path.abspath(src_path + "/../") + return getattr(_modules[kind], "Remote")(args, dir_path) diff --git a/tools/testing/selftests/drivers/net/lib/py/remote_netns.py b/tools/testing/selftests/drivers/net/lib/py/remote_netns.py new file mode 100644 index 000000000000..7d5eeb0271bc --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/remote_netns.py @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +import subprocess + +from lib.py import cmd + + +class Remote: + def __init__(self, name, dir_path): + self.name = name + self.dir_path = dir_path + + def cmd(self, comm): + return subprocess.Popen(["ip", "netns", "exec", self.name, "bash", "-c", comm], + stdout=subprocess.PIPE, stderr=subprocess.PIPE) + + def deploy(self, what): + if os.path.isabs(what): + return what + return os.path.abspath(self.dir_path + "/" + what) diff --git a/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py b/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py new file mode 100644 index 000000000000..924addde19a3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +import string +import subprocess +import random + +from lib.py import cmd + + +class Remote: + def __init__(self, name, dir_path): + self.name = name + self.dir_path = dir_path + self._tmpdir = None + + def __del__(self): + if self._tmpdir: + cmd("rm -rf " + self._tmpdir, host=self) + self._tmpdir = None + + def cmd(self, comm): + return subprocess.Popen(["ssh", "-q", self.name, comm], + stdout=subprocess.PIPE, stderr=subprocess.PIPE) + + def _mktmp(self): + return ''.join(random.choice(string.ascii_lowercase) for _ in range(8)) + + def deploy(self, what): + if not self._tmpdir: + self._tmpdir = "/tmp/" + self._mktmp() + cmd("mkdir " + self._tmpdir, host=self) + file_name = self._tmpdir + "/" + self._mktmp() + os.path.basename(what) + + if not os.path.isabs(what): + what = os.path.abspath(self.dir_path + "/" + what) + + cmd(f"scp {what} {self.name}:{file_name}") + return file_name diff --git a/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh b/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh new file mode 100755 index 000000000000..82be5d013330 --- /dev/null +++ b/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh @@ -0,0 +1,668 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +# The script is adopted to work with the Microchip KSZ switch driver. + +ETH_FCS_LEN=4 + +WAIT_TIME=1 +NUM_NETIFS=4 +REQUIRE_JQ="yes" +REQUIRE_MZ="yes" +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command dcb + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# On h1_ and h2_create do not set IP addresses to avoid interaction with the +# system, to keep packet counters clean. +h1_create() +{ + simple_if_init $h1 + sysctl_set net.ipv6.conf.${h1}.disable_ipv6 1 + # Get the MAC address of the interface to use it with mausezahn + h1_mac=$(ip -j link show dev ${h1} | jq -e '.[].address') +} + +h1_destroy() +{ + sysctl_restore net.ipv6.conf.${h1}.disable_ipv6 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + sysctl_set net.ipv6.conf.${h2}.disable_ipv6 1 + h2_mac=$(ip -j link show dev ${h2} | jq -e '.[].address') +} + +h2_destroy() +{ + sysctl_restore net.ipv6.conf.${h2}.disable_ipv6 + simple_if_fini $h2 +} + +switch_create() +{ + ip link set ${swp1} up + ip link set ${swp2} up + sysctl_set net.ipv6.conf.${swp1}.disable_ipv6 1 + sysctl_set net.ipv6.conf.${swp2}.disable_ipv6 1 + + # Ports should trust VLAN PCP even with vlan_filtering=0 + ip link add br0 type bridge + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + sysctl_set net.ipv6.conf.br0.disable_ipv6 1 +} + +switch_destroy() +{ + sysctl_restore net.ipv6.conf.${swp2}.disable_ipv6 + sysctl_restore net.ipv6.conf.${swp1}.disable_ipv6 + + ip link del br0 +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +set_apptrust_order() +{ + local if_name=$1 + local order=$2 + + dcb apptrust set dev ${if_name} order ${order} +} + +# Function to extract a specified field from a given JSON stats string +extract_network_stat() { + local stats_json=$1 + local field_name=$2 + + echo $(echo "$stats_json" | jq -r "$field_name") +} + +run_test() +{ + local test_name=$1; + local apptrust_order=$2; + local port_prio=$3; + local dscp_ipv=$4; + local dscp=$5; + local have_vlan=$6; + local pcp_ipv=$7; + local vlan_pcp=$8; + local ip_v6=$9 + + local rx_ipv + local tx_ipv + + RET=0 + + # Send some packet to populate the switch MAC table + $MZ ${h2} -a ${h2_mac} -b ${h1_mac} -p 64 -t icmp echores -c 1 + + # Based on the apptrust order, set the expected Internal Priority values + # for the RX and TX paths. + if [ "${apptrust_order}" == "" ]; then + echo "Apptrust order not set." + rx_ipv=${port_prio} + tx_ipv=${port_prio} + elif [ "${apptrust_order}" == "dscp" ]; then + echo "Apptrust order is DSCP." + rx_ipv=${dscp_ipv} + tx_ipv=${dscp_ipv} + elif [ "${apptrust_order}" == "pcp" ]; then + echo "Apptrust order is PCP." + rx_ipv=${pcp_ipv} + tx_ipv=${pcp_ipv} + elif [ "${apptrust_order}" == "pcp dscp" ]; then + echo "Apptrust order is PCP DSCP." + if [ ${have_vlan} -eq 1 ]; then + rx_ipv=$((dscp_ipv > pcp_ipv ? dscp_ipv : pcp_ipv)) + tx_ipv=${pcp_ipv} + else + rx_ipv=${dscp_ipv} + tx_ipv=${dscp_ipv} + fi + else + RET=1 + echo "Error: Unknown apptrust order ${apptrust_order}" + log_test "${test_name}" + return + fi + + # Most/all? of the KSZ switches do not provide per-TC counters. There + # are only tx_hi and rx_hi counters, which are used to count packets + # which are considered as high priority and most likely not assigned + # to the queue 0. + # On the ingress path, packets seem to get high priority status + # independently of the DSCP or PCP global mapping. On the egress path, + # the high priority status is assigned based on the DSCP or PCP global + # map configuration. + # The thresholds for the high priority status are not documented, but + # it seems that the switch considers packets as high priority on the + # ingress path if detected Internal Priority is greater than 0. On the + # egress path, the switch considers packets as high priority if + # detected Internal Priority is greater than 1. + if [ ${rx_ipv} -ge 1 ]; then + local expect_rx_high_prio=1 + else + local expect_rx_high_prio=0 + fi + + if [ ${tx_ipv} -ge 2 ]; then + local expect_tx_high_prio=1 + else + local expect_tx_high_prio=0 + fi + + # Use ip tool to get the current switch packet counters. ethool stats + # need to be recalculated to get the correct values. + local swp1_stats=$(ip -s -j link show dev ${swp1}) + local swp2_stats=$(ip -s -j link show dev ${swp2}) + local swp1_rx_packets_before=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.packets') + local swp1_rx_bytes_before=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.bytes') + local swp2_tx_packets_before=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.packets') + local swp2_tx_bytes_before=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.bytes') + local swp1_rx_hi_before=$(ethtool_stats_get ${swp1} "rx_hi") + local swp2_tx_hi_before=$(ethtool_stats_get ${swp2} "tx_hi") + + # Assamble the mausezahn command based on the test parameters + # For the testis with ipv4 or ipv6, use icmp response packets, + # to avoid interaction with the system, to keep packet counters + # clean. + if [ ${ip_v6} -eq 0 ]; then + local ip="-a ${h1_mac} -b ${h2_mac} -A ${H1_IPV4} \ + -B ${H2_IPV4} -t icmp unreach,code=1,dscp=${dscp}" + else + local ip="-6 -a ${h1_mac} -b ${h2_mac} -A ${H1_IPV6} \ + -B ${H2_IPV6} -t icmp6 type=1,code=0,dscp=${dscp}" + fi + + if [ ${have_vlan} -eq 1 ]; then + local vlan_pcp_opt="-Q ${vlan_pcp}:0" + else + local vlan_pcp_opt="" + fi + $MZ ${h1} ${ip} -c ${PING_COUNT} -d 10msec ${vlan_pcp_opt} + + # Wait until the switch packet counters are updated + sleep 6 + + local swp1_stats=$(ip -s -j link show dev ${swp1}) + local swp2_stats=$(ip -s -j link show dev ${swp2}) + + local swp1_rx_packets_after=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.packets') + local swp1_rx_bytes_after=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.bytes') + local swp2_tx_packets_after=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.packets') + local swp2_tx_bytes_after=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.bytes') + + local swp1_rx_packets_diff=$((${swp1_rx_packets_after} - \ + ${swp1_rx_packets_before})) + local swp2_tx_packets_diff=$((${swp2_tx_packets_after} - \ + ${swp2_tx_packets_before})) + + local swp1_rx_hi_after=$(ethtool_stats_get ${swp1} "rx_hi") + local swp2_tx_hi_after=$(ethtool_stats_get ${swp2} "tx_hi") + + # Test if any packets were received on swp1, we will rx before and after + if [ ${swp1_rx_packets_diff} -lt ${PING_COUNT} ]; then + echo "Not expected amount of received packets on ${swp1}" + echo "before ${swp1_rx_packets_before} after ${swp1_rx_packets_after}" + RET=1 + fi + + # Test if any packets were transmitted on swp2, we will tx before and after + if [ ${swp2_tx_packets_diff} -lt ${PING_COUNT} ]; then + echo "Not expected amount of transmitted packets on ${swp2}" + echo "before ${swp2_tx_packets_before} after ${swp2_tx_packets_after}" + RET=1 + fi + + # tx/rx_hi counted in bytes. So, we need to compare the difference in bytes + local swp1_rx_bytes_diff=$(($swp1_rx_bytes_after - $swp1_rx_bytes_before)) + local swp2_tx_bytes_diff=$(($swp2_tx_bytes_after - $swp2_tx_bytes_before)) + local swp1_rx_hi_diff=$(($swp1_rx_hi_after - $swp1_rx_hi_before)) + local swp2_tx_hi_diff=$(($swp2_tx_hi_after - $swp2_tx_hi_before)) + + if [ ${expect_rx_high_prio} -eq 1 ]; then + swp1_rx_hi_diff=$((${swp1_rx_hi_diff} - \ + ${swp1_rx_packets_diff} * ${ETH_FCS_LEN})) + if [ ${swp1_rx_hi_diff} -ne ${swp1_rx_bytes_diff} ]; then + echo "Not expected amount of high priority packets received on ${swp1}" + echo "RX hi diff: ${swp1_rx_hi_diff}, expected RX bytes diff: ${swp1_rx_bytes_diff}" + RET=1 + fi + else + if [ ${swp1_rx_hi_diff} -ne 0 ]; then + echo "Unexpected amount of high priority packets received on ${swp1}" + echo "RX hi diff: ${swp1_rx_hi_diff}, expected 0" + RET=1 + fi + fi + + if [ ${expect_tx_high_prio} -eq 1 ]; then + swp2_tx_hi_diff=$((${swp2_tx_hi_diff} - \ + ${swp2_tx_packets_diff} * ${ETH_FCS_LEN})) + if [ ${swp2_tx_hi_diff} -ne ${swp2_tx_bytes_diff} ]; then + echo "Not expected amount of high priority packets transmitted on ${swp2}" + echo "TX hi diff: ${swp2_tx_hi_diff}, expected TX bytes diff: ${swp2_tx_bytes_diff}" + RET=1 + fi + else + if [ ${swp2_tx_hi_diff} -ne 0 ]; then + echo "Unexpected amount of high priority packets transmitted on ${swp2}" + echo "TX hi diff: ${swp2_tx_hi_diff}, expected 0" + RET=1 + fi + fi + + log_test "${test_name}" +} + +run_test_dscp() +{ + # IPv4 test + run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 0 + # IPv6 test + run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 1 +} + +run_test_dscp_pcp() +{ + # IPv4 test + run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 0 + # IPv6 test + run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 1 +} + +port_default_prio_get() +{ + local if_name=$1 + local prio + + prio="$(dcb -j app show dev ${if_name} default-prio | \ + jq '.default_prio[]')" + if [ -z "${prio}" ]; then + prio=0 + fi + + echo ${prio} +} + +test_port_default() +{ + local orig_apptrust=$(port_get_default_apptrust ${swp1}) + local orig_prio=$(port_default_prio_get ${swp1}) + local apptrust_order="" + + RET=0 + + # Make sure no other priority sources will interfere with the test + set_apptrust_order ${swp1} "${apptrust_order}" + + for val in $(seq 0 7); do + dcb app replace dev ${swp1} default-prio ${val} + if [ $val -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + break + fi + + run_test_dscp "Port-default QoS classification, prio: ${val}" \ + "${apptrust_order}" ${val} 0 0 + done + + set_apptrust_order ${swp1} "${orig_apptrust}" + if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then + RET=1 + fi + + dcb app replace dev ${swp1} default-prio ${orig_prio} + if [ $orig_prio -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + fi + + log_test "Port-default QoS classification" +} + +port_get_default_apptrust() +{ + local if_name=$1 + + dcb -j apptrust show dev ${if_name} | jq -r '.order[]' | \ + tr '\n' ' ' | xargs +} + +test_port_apptrust() +{ + local original_dscp_prios_swp1=$(get_dscp_prios ${swp1}) + local orig_apptrust=$(port_get_default_apptrust ${swp1}) + local orig_port_prio=$(port_default_prio_get ${swp1}) + local order_variants=("pcp dscp" "dscp" "pcp") + local apptrust_order + local port_prio + local dscp_prio + local pcp_prio + local dscp + local pcp + + RET=0 + + # First, test if apptrust configuration as taken by the kernel + for order in "${order_variants[@]}"; do + set_apptrust_order ${swp1} "${order}" + if [[ "$order" != "$(port_get_default_apptrust ${swp1})" ]]; then + RET=1 + break + fi + done + + log_test "Apptrust, supported variants" + + # To test if the apptrust configuration is working as expected, we need + # to set DSCP priorities for the switch port. + init_dscp_prios "${swp1}" "${original_dscp_prios_swp1}" + + # Start with a simple test where all apptrust sources are disabled + # default port priority is 0, DSCP priority is mapped to 7. + # No high priority packets should be received or transmitted. + port_prio=0 + dscp_prio=7 + dscp=4 + + dcb app replace dev ${swp1} default-prio ${port_prio} + dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio} + + apptrust_order="" + set_apptrust_order ${swp1} "${apptrust_order}" + # Test with apptrust sources disabled, Packets should get port default + # priority which is 0 + run_test_dscp "Apptrust, all disabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + apptrust_order="pcp" + set_apptrust_order ${swp1} "${apptrust_order}" + # If PCP is enabled, packets should get PCP priority, which is not + # set in this test (no VLAN tags are present in the packet). No high + # priority packets should be received or transmitted. + run_test_dscp "Apptrust, PCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + apptrust_order="dscp" + set_apptrust_order ${swp1} "${apptrust_order}" + # If DSCP is enabled, packets should get DSCP priority which is set to 7 + # in this test. High priority packets should be received and transmitted. + run_test_dscp "Apptrust, DSCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + apptrust_order="pcp dscp" + set_apptrust_order ${swp1} "${apptrust_order}" + # If PCP and DSCP are enabled, PCP would have higher apptrust priority + # so packets should get PCP priority. But in this test VLAN PCP is not + # set, so it should get DSCP priority which is set to 7. High priority + # packets should be received and transmitted. + run_test_dscp "Apptrust, PCP and DSCP are enabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + # If VLAN PCP is set, it should have higher apptrust priority than DSCP + # so packets should get VLAN PCP priority. Send packets with VLAN PCP + # set to 0, DSCP set to 7. Packets should get VLAN PCP priority. + # No high priority packets should be transmitted. Due to nature of the + # switch, high priority packets will be received. + pcp_prio=0 + pcp=0 + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + + # If VLAN PCP is set to 7, it should have higher apptrust priority than + # DSCP so packets should get VLAN PCP priority. Send packets with VLAN + # PCP set to 7, DSCP set to 7. Packets should get VLAN PCP priority. + # High priority packets should be received and transmitted. + pcp_prio=7 + pcp=7 + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + # Now make sure that the switch is able to handle the case where DSCP + # priority is set to 0 and PCP priority is set to 7. Packets should get + # PCP priority. High priority packets should be received and transmitted. + dscp_prio=0 + dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio} + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + # If both VLAN PCP and DSCP are set to 0, packets should get 0 priority. + # No high priority packets should be received or transmitted. + pcp_prio=0 + pcp=0 + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + + # Restore original priorities + if ! restore_priorities "${swp1}" "${original_dscp_prios_swp1}"; then + RET=1 + fi + + set_apptrust_order ${swp1} "${orig_apptrust}" + if [ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]; then + RET=1 + fi + + dcb app replace dev ${swp1} default-prio ${orig_port_prio} + if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + fi + + log_test "Apptrust, restore original settings" +} + +# Function to get current DSCP priorities +get_dscp_prios() { + local if_name=$1 + dcb -j app show dev ${if_name} | jq -c '.dscp_prio' +} + +# Function to set a specific DSCP priority on a device +replace_dscp_prio() { + local if_name=$1 + local dscp=$2 + local prio=$3 + dcb app replace dev ${if_name} dscp-prio ${dscp}:${prio} +} + +# Function to compare DSCP maps +compare_dscp_maps() { + local old_json=$1 + local new_json=$2 + local dscp=$3 + local prio=$4 + + # Create a modified old_json with the expected change for comparison + local modified_old_json=$(echo "$old_json" | + jq --argjson dscp $dscp --argjson prio $prio \ + 'map(if .[0] == $dscp then [$dscp, $prio] else . end)' | + tr -d " \n") + + # Compare new_json with the modified_old_json + if [[ "$modified_old_json" == "$new_json" ]]; then + return 0 + else + return 1 + fi +} + +# Function to set DSCP priorities +set_and_verify_dscp() { + local port=$1 + local dscp=$2 + local new_prio=$3 + + local old_prios=$(get_dscp_prios $port) + + replace_dscp_prio "$port" $dscp $new_prio + + # Fetch current settings and compare + local current_prios=$(get_dscp_prios $port) + if ! compare_dscp_maps "$old_prios" "$current_prios" $dscp $new_prio; then + echo "Error: Unintended changes detected in DSCP map for $port after setting DSCP $dscp to $new_prio." + return 1 + fi + return 0 +} + +# Function to restore original priorities +restore_priorities() { + local port=$1 + local original_prios=$2 + + echo "Removing test artifacts for $port" + local current_prios=$(get_dscp_prios $port) + local prio_str=$(echo "$current_prios" | + jq -r 'map("\(.[0]):\(.[1])") | join(" ")') + dcb app del dev $port dscp-prio $prio_str + + echo "Restoring original DSCP priorities for $port" + local restore_str=$(echo "$original_prios" | + jq -r 'map("\(.[0]):\(.[1])") | join(" ")') + dcb app add dev $port dscp-prio $restore_str + + local current_prios=$(get_dscp_prios $port) + if [[ "$original_prios" != "$current_prios" ]]; then + echo "Error: Failed to restore original DSCP priorities for $port" + return 1 + fi + return 0 +} + +# Initialize DSCP priorities. Set them to predictable values for testing. +init_dscp_prios() { + local port=$1 + local original_prios=$2 + + echo "Removing any existing DSCP priority mappins for $port" + local prio_str=$(echo "$original_prios" | + jq -r 'map("\(.[0]):\(.[1])") | join(" ")') + dcb app del dev $port dscp-prio $prio_str + + # Initialize DSCP priorities list + local dscp_prios="" + for dscp in {0..63}; do + dscp_prios+=("$dscp:0") + done + + echo "Setting initial DSCP priorities map to 0 for $port" + dcb app add dev $port dscp-prio ${dscp_prios[@]} +} + +# Main function to test global DSCP map across specified ports +test_global_dscp_map() { + local ports=("$swp1" "$swp2") + local original_dscp_prios_port0=$(get_dscp_prios ${ports[0]}) + local orig_apptrust=$(port_get_default_apptrust ${swp1}) + local orig_port_prio=$(port_default_prio_get ${swp1}) + local apptrust_order="dscp" + local port_prio=0 + local dscp_prio + local dscp + + RET=0 + + set_apptrust_order ${swp1} "${apptrust_order}" + dcb app replace dev ${swp1} default-prio ${port_prio} + + # Initialize DSCP priorities + init_dscp_prios "${ports[0]}" "$original_dscp_prios_port0" + + # Loop over each DSCP index + for dscp in {0..63}; do + # and test each Internal Priority value + for dscp_prio in {0..7}; do + # do it for each port. This is to test if the global DSCP map + # is accessible from all ports. + for port in "${ports[@]}"; do + if ! set_and_verify_dscp "$port" $dscp $dscp_prio; then + RET=1 + fi + done + + # Test if the DSCP priority is correctly applied to the packets + run_test_dscp "DSCP (${dscp}) QoS classification, prio: ${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + if [ ${RET} -eq 1 ]; then + break + fi + done + done + + # Restore original priorities + if ! restore_priorities "${ports[0]}" "${original_dscp_prios_port0}"; then + RET=1 + fi + + set_apptrust_order ${swp1} "${orig_apptrust}" + if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then + RET=1 + fi + + dcb app replace dev ${swp1} default-prio ${orig_port_prio} + if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + fi + + log_test "DSCP global map" +} + +trap cleanup EXIT + +ALL_TESTS=" + test_port_default + test_port_apptrust + test_global_dscp_map +" + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh index 91891b9418d7..877cd6df94a1 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh @@ -24,8 +24,8 @@ setup_prepare() busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 check_err $? "ports did not come up" - local lanes_exist=$(ethtool $swp1 | grep 'Lanes:') - if [[ -z $lanes_exist ]]; then + busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:" + if [[ $? -ne 0 ]]; then log_test "SKIP: driver does not support lanes setting" exit 1 fi @@ -122,8 +122,9 @@ autoneg() ethtool_set $swp1 speed $max_speed lanes $lanes ip link set dev $swp1 up ip link set dev $swp2 up - busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 - check_err $? "ports did not come up" + + busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:" + check_err $? "Lanes parameter is not presented on time" check_lanes $swp1 $lanes $max_speed log_test "$lanes lanes is autonegotiated" @@ -160,8 +161,9 @@ autoneg_force_mode() ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off ip link set dev $swp1 up ip link set dev $swp2 up - busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 - check_err $? "ports did not come up" + + busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:" + check_err $? "Lanes parameter is not presented on time" check_lanes $swp1 $lanes $max_speed log_test "Autoneg off, $lanes lanes detected during force mode" diff --git a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh index 6369927e9c37..48395cfd4f95 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh @@ -42,7 +42,7 @@ __mlxsw_only_on_spectrum() local src=$1; shift if ! mlxsw_on_spectrum "$rev"; then - log_test_skip $src:$caller "(Spectrum-$rev only)" + log_test_xfail $src:$caller "(Spectrum-$rev only)" return 1 fi } diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh index a88d8a8c85f2..899b6892603f 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh @@ -47,7 +47,6 @@ for current_test in ${TESTS:-$ALL_TESTS}; do RET=0 target=$(${current_test}_get_target "$should_fail") if ((target == 0)); then - log_test_skip "'$current_test' should_fail=$should_fail test" continue fi diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh index f981c957f097..482ebb744eba 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -52,7 +52,6 @@ for current_test in ${TESTS:-$ALL_TESTS}; do RET=0 target=$(${current_test}_get_target "$should_fail") if ((target == 0)); then - log_test_skip "'$current_test' [$profile] should_fail=$should_fail test" continue fi ${current_test}_setup_prepare diff --git a/tools/testing/selftests/drivers/net/netdevsim/settings b/tools/testing/selftests/drivers/net/netdevsim/settings new file mode 100644 index 000000000000..a62d2fa1275c --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/settings @@ -0,0 +1 @@ +timeout=600 diff --git a/tools/testing/selftests/drivers/net/ping.py b/tools/testing/selftests/drivers/net/ping.py new file mode 100755 index 000000000000..eb83e7b48797 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ping.py @@ -0,0 +1,51 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_run, ksft_exit +from lib.py import ksft_eq +from lib.py import NetDrvEpEnv +from lib.py import bkg, cmd, wait_port_listen, rand_port + + +def test_v4(cfg) -> None: + cfg.require_v4() + + cmd(f"ping -c 1 -W0.5 {cfg.remote_v4}") + cmd(f"ping -c 1 -W0.5 {cfg.v4}", host=cfg.remote) + + +def test_v6(cfg) -> None: + cfg.require_v6() + + cmd(f"ping -c 1 -W0.5 {cfg.remote_v6}") + cmd(f"ping -c 1 -W0.5 {cfg.v6}", host=cfg.remote) + + +def test_tcp(cfg) -> None: + cfg.require_cmd("socat", remote=True) + + port = rand_port() + listen_cmd = f"socat -{cfg.addr_ipver} -t 2 -u TCP-LISTEN:{port},reuseport STDOUT" + + with bkg(listen_cmd, exit_wait=True) as nc: + wait_port_listen(port) + + cmd(f"echo ping | socat -t 2 -u STDIN TCP:{cfg.baddr}:{port}", + shell=True, host=cfg.remote) + ksft_eq(nc.stdout.strip(), "ping") + + with bkg(listen_cmd, host=cfg.remote, exit_wait=True) as nc: + wait_port_listen(port, host=cfg.remote) + + cmd(f"echo ping | socat -t 2 -u STDIN TCP:{cfg.remote_baddr}:{port}", shell=True) + ksft_eq(nc.stdout.strip(), "ping") + + +def main() -> None: + with NetDrvEpEnv(__file__) as cfg: + ksft_run(globs=globals(), case_pfx={"test_"}, args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/queues.py b/tools/testing/selftests/drivers/net/queues.py new file mode 100755 index 000000000000..30f29096e27c --- /dev/null +++ b/tools/testing/selftests/drivers/net/queues.py @@ -0,0 +1,66 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_run, ksft_exit, ksft_eq, KsftSkipEx +from lib.py import EthtoolFamily, NetdevFamily +from lib.py import NetDrvEnv +from lib.py import cmd +import glob + + +def sys_get_queues(ifname) -> int: + folders = glob.glob(f'/sys/class/net/{ifname}/queues/rx-*') + return len(folders) + + +def nl_get_queues(cfg, nl): + queues = nl.queue_get({'ifindex': cfg.ifindex}, dump=True) + if queues: + return len([q for q in queues if q['type'] == 'rx']) + return None + + +def get_queues(cfg, nl) -> None: + queues = nl_get_queues(cfg, nl) + if not queues: + raise KsftSkipEx('queue-get not supported by device') + + expected = sys_get_queues(cfg.dev['ifname']) + ksft_eq(queues, expected) + + +def addremove_queues(cfg, nl) -> None: + queues = nl_get_queues(cfg, nl) + if not queues: + raise KsftSkipEx('queue-get not supported by device') + + curr_queues = sys_get_queues(cfg.dev['ifname']) + if curr_queues == 1: + raise KsftSkipEx('cannot decrement queue: already at 1') + + netnl = EthtoolFamily() + channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + if channels['combined-count'] == 0: + rx_type = 'rx' + else: + rx_type = 'combined' + + expected = curr_queues - 1 + cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10) + queues = nl_get_queues(cfg, nl) + ksft_eq(queues, expected) + + expected = curr_queues + cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10) + queues = nl_get_queues(cfg, nl) + ksft_eq(queues, expected) + + +def main() -> None: + with NetDrvEnv(__file__, queue_count=3) as cfg: + ksft_run([get_queues, addremove_queues], args=(cfg, NetdevFamily())) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/stats.py b/tools/testing/selftests/drivers/net/stats.py new file mode 100755 index 000000000000..820b8e0a22c6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/stats.py @@ -0,0 +1,144 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_run, ksft_exit, ksft_pr +from lib.py import ksft_ge, ksft_eq, ksft_in, ksft_true, ksft_raises, KsftSkipEx, KsftXfailEx +from lib.py import EthtoolFamily, NetdevFamily, RtnlFamily, NlError +from lib.py import NetDrvEnv + +ethnl = EthtoolFamily() +netfam = NetdevFamily() +rtnl = RtnlFamily() + + +def check_pause(cfg) -> None: + global ethnl + + try: + ethnl.pause_get({"header": {"dev-index": cfg.ifindex}}) + except NlError as e: + if e.error == 95: + raise KsftXfailEx("pause not supported by the device") + raise + + data = ethnl.pause_get({"header": {"dev-index": cfg.ifindex, + "flags": {'stats'}}}) + ksft_true(data['stats'], "driver does not report stats") + + +def check_fec(cfg) -> None: + global ethnl + + try: + ethnl.fec_get({"header": {"dev-index": cfg.ifindex}}) + except NlError as e: + if e.error == 95: + raise KsftXfailEx("FEC not supported by the device") + raise + + data = ethnl.fec_get({"header": {"dev-index": cfg.ifindex, + "flags": {'stats'}}}) + ksft_true(data['stats'], "driver does not report stats") + + +def pkt_byte_sum(cfg) -> None: + global netfam, rtnl + + def get_qstat(test): + global netfam + stats = netfam.qstats_get({}, dump=True) + if stats: + for qs in stats: + if qs["ifindex"]== test.ifindex: + return qs + + qstat = get_qstat(cfg) + if qstat is None: + raise KsftSkipEx("qstats not supported by the device") + + for key in ['tx-packets', 'tx-bytes', 'rx-packets', 'rx-bytes']: + ksft_in(key, qstat, "Drivers should always report basic keys") + + # Compare stats, rtnl stats and qstats must match, + # but the interface may be up, so do a series of dumps + # each time the more "recent" stats must be higher or same. + def stat_cmp(rstat, qstat): + for key in ['tx-packets', 'tx-bytes', 'rx-packets', 'rx-bytes']: + if rstat[key] != qstat[key]: + return rstat[key] - qstat[key] + return 0 + + for _ in range(10): + rtstat = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + if stat_cmp(rtstat, qstat) < 0: + raise Exception("RTNL stats are lower, fetched later") + qstat = get_qstat(cfg) + if stat_cmp(rtstat, qstat) > 0: + raise Exception("Qstats are lower, fetched later") + + +def qstat_by_ifindex(cfg) -> None: + global netfam + global rtnl + + # Construct a map ifindex -> [dump, by-index, dump] + ifindexes = {} + stats = netfam.qstats_get({}, dump=True) + for entry in stats: + ifindexes[entry['ifindex']] = [entry, None, None] + + for ifindex in ifindexes.keys(): + entry = netfam.qstats_get({"ifindex": ifindex}, dump=True) + ksft_eq(len(entry), 1) + ifindexes[entry[0]['ifindex']][1] = entry[0] + + stats = netfam.qstats_get({}, dump=True) + for entry in stats: + ifindexes[entry['ifindex']][2] = entry + + if len(ifindexes) == 0: + raise KsftSkipEx("No ifindex supports qstats") + + # Now make sure the stats match/make sense + for ifindex, triple in ifindexes.items(): + all_keys = triple[0].keys() | triple[1].keys() | triple[2].keys() + + for key in all_keys: + ksft_ge(triple[1][key], triple[0][key], comment="bad key: " + key) + ksft_ge(triple[2][key], triple[1][key], comment="bad key: " + key) + + # Test invalid dumps + # 0 is invalid + with ksft_raises(NlError) as cm: + netfam.qstats_get({"ifindex": 0}, dump=True) + ksft_eq(cm.exception.nl_msg.error, -34) + ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex') + + # loopback has no stats + with ksft_raises(NlError) as cm: + netfam.qstats_get({"ifindex": 1}, dump=True) + ksft_eq(cm.exception.nl_msg.error, -95) + ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex') + + # Try to get stats for lowest unused ifindex but not 0 + devs = rtnl.getlink({}, dump=True) + all_ifindexes = set([dev["ifi-index"] for dev in devs]) + lowest = 2 + while lowest in all_ifindexes: + lowest += 1 + + with ksft_raises(NlError) as cm: + netfam.qstats_get({"ifindex": lowest}, dump=True) + ksft_eq(cm.exception.nl_msg.error, -19) + ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex') + + +def main() -> None: + with NetDrvEnv(__file__) as cfg: + ksft_run([check_pause, check_fec, pkt_byte_sum, qstat_by_ifindex], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/virtio_net/Makefile b/tools/testing/selftests/drivers/net/virtio_net/Makefile new file mode 100644 index 000000000000..7ec7cd3ab2cc --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/Makefile @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_PROGS = basic_features.sh \ + # + +TEST_FILES = \ + virtio_net_common.sh \ + # + +TEST_INCLUDES = \ + ../../../net/forwarding/lib.sh \ + ../../../net/lib.sh \ + # + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh new file mode 100755 index 000000000000..cf8cf816ed48 --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh @@ -0,0 +1,131 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# See virtio_net_common.sh comments for more details about assumed setup + +ALL_TESTS=" + initial_ping_test + f_mac_test +" + +source virtio_net_common.sh + +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +h1=${NETIFS[p1]} +h2=${NETIFS[p2]} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +initial_ping_test() +{ + setup_cleanup + setup_prepare + ping_test $h1 $H2_IPV4 " simple" +} + +f_mac_test() +{ + RET=0 + local test_name="mac feature filtered" + + virtio_feature_present $h1 $VIRTIO_NET_F_MAC + if [ $? -ne 0 ]; then + log_test_skip "$test_name" "Device $h1 is missing feature $VIRTIO_NET_F_MAC." + return 0 + fi + virtio_feature_present $h1 $VIRTIO_NET_F_MAC + if [ $? -ne 0 ]; then + log_test_skip "$test_name" "Device $h2 is missing feature $VIRTIO_NET_F_MAC." + return 0 + fi + + setup_cleanup + setup_prepare + + grep -q 0 /sys/class/net/$h1/addr_assign_type + check_err $? "Permanent address assign type for $h1 is not set" + grep -q 0 /sys/class/net/$h2/addr_assign_type + check_err $? "Permanent address assign type for $h2 is not set" + + setup_cleanup + virtio_filter_feature_add $h1 $VIRTIO_NET_F_MAC + virtio_filter_feature_add $h2 $VIRTIO_NET_F_MAC + setup_prepare + + grep -q 0 /sys/class/net/$h1/addr_assign_type + check_fail $? "Permanent address assign type for $h1 is set when F_MAC feature is filtered" + grep -q 0 /sys/class/net/$h2/addr_assign_type + check_fail $? "Permanent address assign type for $h2 is set when F_MAC feature is filtered" + + ping_do $h1 $H2_IPV4 + check_err $? "Ping failed" + + log_test "$test_name" +} + +setup_prepare() +{ + virtio_device_rebind $h1 + virtio_device_rebind $h2 + wait_for_dev $h1 + wait_for_dev $h2 + + vrf_prepare + + h1_create + h2_create +} + +setup_cleanup() +{ + h2_destroy + h1_destroy + + vrf_cleanup + + virtio_filter_features_clear $h1 + virtio_filter_features_clear $h2 + virtio_device_rebind $h1 + virtio_device_rebind $h2 + wait_for_dev $h1 + wait_for_dev $h2 +} + +cleanup() +{ + pre_cleanup + setup_cleanup +} + +check_driver $h1 "virtio_net" +check_driver $h2 "virtio_net" +check_virtio_debugfs $h1 +check_virtio_debugfs $h2 + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/virtio_net/config b/tools/testing/selftests/drivers/net/virtio_net/config new file mode 100644 index 000000000000..f35de0542b60 --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/config @@ -0,0 +1,2 @@ +CONFIG_VIRTIO_NET=y +CONFIG_VIRTIO_DEBUG=y diff --git a/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh b/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh new file mode 100644 index 000000000000..57bd8055e2e5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh @@ -0,0 +1,99 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This assumes running on a host with two virtio interfaces connected +# back to back. Example script to do such wire-up of tap devices would +# look like this: +# +# ======================================================================================================= +# #!/bin/bash +# +# DEV1="$1" +# DEV2="$2" +# +# sudo tc qdisc add dev $DEV1 clsact +# sudo tc qdisc add dev $DEV2 clsact +# sudo tc filter add dev $DEV1 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV2 +# sudo tc filter add dev $DEV2 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV1 +# sudo ip link set $DEV1 up +# sudo ip link set $DEV2 up +# ======================================================================================================= + +REQUIRE_MZ="no" +NETIF_CREATE="no" +NETIF_FIND_DRIVER="virtio_net" +NUM_NETIFS=2 + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +VIRTIO_NET_F_MAC=5 + +virtio_device_get() +{ + local dev=$1; shift + local device_path="/sys/class/net/$dev/device/" + + basename `realpath $device_path` +} + +virtio_device_rebind() +{ + local dev=$1; shift + local device=`virtio_device_get $dev` + + echo "$device" > /sys/bus/virtio/drivers/virtio_net/unbind + echo "$device" > /sys/bus/virtio/drivers/virtio_net/bind +} + +virtio_debugfs_get() +{ + local dev=$1; shift + local device=`virtio_device_get $dev` + + echo /sys/kernel/debug/virtio/$device/ +} + +check_virtio_debugfs() +{ + local dev=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + if [ ! -f "$debugfs/device_features" ] || + [ ! -f "$debugfs/filter_feature_add" ] || + [ ! -f "$debugfs/filter_feature_del" ] || + [ ! -f "$debugfs/filter_features" ] || + [ ! -f "$debugfs/filter_features_clear" ]; then + echo "SKIP: not possible to access debugfs for $dev" + exit $ksft_skip + fi +} + +virtio_feature_present() +{ + local dev=$1; shift + local feature=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + cat $debugfs/device_features |grep "^$feature$" &> /dev/null + return $? +} + +virtio_filter_features_clear() +{ + local dev=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + echo "1" > $debugfs/filter_features_clear +} + +virtio_filter_feature_add() +{ + local dev=$1; shift + local feature=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + echo "$feature" > $debugfs/filter_feature_add +} |