| Age | Commit message (Collapse) | Author |
|---|
|
and 'clk-amlogic' into clk-next
* clk-renesas: (42 commits)
clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well
clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
clk: renesas: r9a09g057: Add XSPI clock/reset
clk: renesas: r9a09g056: Add XSPI clock/reset
clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting
clk: renesas: r9a09g057: Add support for xspi mux and divider
clk: renesas: r9a09g056: Add support for xspi mux and divider
clk: renesas: r9a09g077: Add RIIC module clocks
clk: renesas: r9a09g077: Add PLL2 and SDHI clock support
clk: renesas: rzv2h: Drop redundant base pointer from pll_clk
clk: renesas: r9a09g057: Add entries for the RSPIs
dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID
dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
clk: renesas: rzv2h: Add missing include file
clk: renesas: rzv2h: Use devm_kmemdup_array()
clk: renesas: Add CPG/MSSR support to RZ/N2H SoC
clk: renesas: r9a09g077: Add PCLKL core clock
dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support
dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC
dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID
...
* clk-samsung:
clk: samsung: exynosautov920: add block hsi2 clock support
dt-bindings: clock: exynosautov920: add hsi2 clock definitions
dt-bindings: clock: exynosautov920: sort clock definitions
clk: samsung: exynos850: fix a comment
clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock
clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD
* clk-spacemit:
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
reset: spacemit: add support for SpacemiT CCU resets
clk: spacemit: mark K1 pll1_d8 as critical
clk: spacemit: define three reset-only CCUs
clk: spacemit: set up reset auxiliary devices
soc: spacemit: create a header for clock/reset registers
dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
* clk-allwinner:
clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate()
clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll
clk: sunxi-ng: v3s: Fix de clock definition
clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
* clk-amlogic:
clk: amlogic: s4: remove unused data
clk: amlogic: drop clk_regmap tables
clk: amlogic: get regmap with clk_regmap_init
clk: amlogic: remove unnecessary headers
clk: amlogic: axg-audio: use the auxiliary reset driver
|
|
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Register compatible and cmu_info data to support clocks.
CMU_HSI2, this provides clocks for HSI2 block
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250529112640.1646740-4-raghav.s@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The code below the updated comment is for CMU_CPUCL1, not CMU_CPUCL0.
Fixes: dedf87341ad6 ("clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250603-samsung-clk-fixes-v1-3-49daf1ff4592@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The alternate parent clock for this mux is mout_pll_usb, not the pll
itself.
Fixes: 1891e4d48755 ("clk: samsung: gs101: add support for cmu_hsi0")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250603-samsung-clk-fixes-v1-2-49daf1ff4592@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Use the correct Linux clock ID when instantiating the G3D_BUSD
div_clock.
Fixes: 2c597bb7d66a ("clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250603-samsung-clk-fixes-v1-1-49daf1ff4592@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
clk_summary shows wrong value for "mout_hsi1_usbdrd_user".
It shows 400Mhz instead of 40Mhz as below.
dout_shared2_div4 1 1 0 400000000 0 0 50000 Y ...
mout_hsi1_usbdrd_user 0 0 0 400000000 0 0 50000 Y ...
dout_clkcmu_hsi1_usbdrd 0 0 0 40000000 0 0 50000 Y ...
Correct the clk_tree by adding correct clock parent for
"mout_hsi1_usbdrd_user".
Post this change, clk_summary shows correct value.
dout_shared2_div4 1 1 0 400000000 0 0 50000 Y ...
mout_clkcmu_hsi1_usbdrd 0 0 0 400000000 0 0 50000 Y ...
dout_clkcmu_hsi1_usbdrd 0 0 0 40000000 0 0 50000 Y ...
mout_hsi1_usbdrd_user 0 0 0 40000000 0 0 50000 Y ...
Fixes: 485e13fe2fb6 ("clk: samsung: add top clock support for ExynosAuto v920 SoC")
Cc: <stable@kernel.org>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20250506080154.3995512-1-pritam.sutar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The CLKS_NR_CPUCL0 macro was incorrectly defined based on a wrong clock ID.
It mistakenly referenced CLK_DOUT_CLUSTER0_PERIPHCLK, which corresponds to
a cluster peripheral clock, not the last clock ID for CPUCL0 as intended.
This patch corrects the definition to use CLK_DOUT_CPUCL0_NOCP + 1,
properly matching the last clock ID for CPUCL0 as intended.
This error was due to confusion with the hardware diagram, and this patch
ensures that the number of clocks for CPUCL0 is correctly defined.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-4-shin.son@samsung.com
Fixes: 59636ec89c2c ("clk: samsung: exynosautov920: add cpucl0 clock support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Register compatible and cmu_info data to support clock CPUCL1/2
(CPU Cluster 1 and CPU Cluster 2),
these provide clock for CPUCL1/2_SWTICH/CLUSTER.
These clocks are required early during boot for the CPUs,
so they are declared using CLK_OF_DECLARE instead of being registered
through a platform driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Register compatible and cmu_info data to support clock CPUCL0(CPU
Cluster 0), this provides clock for CPUCL0_SWTICH/DBG/CLUSTER. These
clocks are required early during boot for the CPUs, so they are declared
using CLK_OF_DECLARE instead of being registered through a platform
driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250423044153.1288077-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Use samsung CCF function which registers multiple clock providers using
single function call samsung_cmu_register_clocks().
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250307092403.19742-1-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.
Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...
|
|
<clk.h> header is for clock consumers, so drop its include from the
Samsung clock controller drivers which do not use the consumer API
(there are few which do, so leave it there).
Drop including of <of.h> and <of_address.h> headers for all drivers
which do not use anything from generic OF API or of_iomap().
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250305-clk-samsung-headers-cleanup-v2-2-ea1ae8e9e2bf@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add an include for <mod_devicetable.h> in the drivers which use
of_device_id table to bring its declaration directly, not through some
other headers.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250305-clk-samsung-headers-cleanup-v2-1-ea1ae8e9e2bf@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Currently PLL142XX locktime is 270. As per spec, it should be 150. Hence
update PLL142XX controller locktime to 150.
Cc: stable@vger.kernel.org
Fixes: 4f346005aaed ("clk: samsung: fsd: Add initial clock support")
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250225131918.50925-3-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
EARLY_WAKEUP_SW_TRIG_*_SET and EARLY_WAKEUP_SW_TRIG_*_CLEAR
registers are only writeable. Attempting to read these registers
during samsung_clk_save() causes a synchronous external abort.
Remove these 8 registers from cmu_top_clk_regs[] array so that
system suspend gets further.
Note: the code path can be exercised using the following command:
echo mem > /sys/power/state
Fixes: 2c597bb7d66a ("clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250303-clk-suspend-fix-v1-1-c2edaf66260f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
This is a basic implementation of the clock driver required by
Samsung's Exynos7870 SoC. It implements CMU_MIF, CMU_DISPAUD, CMU_FSYS,
CMU_G3D, CMU_ISP, CMU_MFCMSCL, and CMU_PERI. all other CMUs depend on
CMU_MIF.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmu-clocks-v5-2-715b646d5206@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
CMU_TOP is the top level clock management unit which contains PLLs,
muxes, dividers and gates that feed the other clock management units.
CMU_ALIVE provides clocks for SPMI, the new MCT and other clock
management units
CMU_CMGP provides clocks for USI blocks
CMU_HSI0 provides clocks for USB
CMU_PERIC0 provides clocks for USI4 and I3C blocks
CMU_PERIC1 provides clocks for USI blocks
CMU_PERIC2 provides clocks for USI and I3C blocks
CMU_PERIS provides clocks for GIC and the legacy MCT
CMU_UFS provides clocks for UFS
CMU_VTS provides clocks for other clock management units
like CMU_AUD, which will be added in the future.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
pll4311 (also known in the vendor kernel as frd_4311_rpll) is a PLL used
in the Exynos2200 SoC. It's an integer/fractional PLL with mid frequency
FVCO (650 to 3500Mhz).
The PLL is functionally similar enough to pll531x, so the same code can
handle both.
Locktime for pll4311 is 500 - the same as the pll531x lock factor. MDIV,
PDIV, SDIV and FDIV masks and bit shifts are also the same as pll531x.
When defining a PLL, the "con" parameter should be set to CON3
register, like this:
PLL(pll_4311, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, NULL),
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250223115601.723886-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to
dereferencing `ctx->clk_data.hws` before setting
`ctx->clk_data.num = nr_clks`. Move that up to fix the crash.
UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
<snip>
Call trace:
samsung_clk_init+0x110/0x124 (P)
samsung_clk_init+0x48/0x124 (L)
samsung_cmu_register_one+0x3c/0xa0
exynos_arm64_register_cmu+0x54/0x64
__gs101_cmu_top_of_clk_init_declare+0x28/0x60
...
Fixes: e620a1e061c4 ("drivers/clk: convert VL struct to struct_size")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250212183253.509771-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
There is a spelling mistake in a pr_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250202220425.199146-1-colin.i.king@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The CMU_PERIS block is used for clocking the MCT, and has one dependency
clock from CMU_TOP. As the MCT is initialized early, this CMU is also
registered early.
While at it, make the parent clock list comment spaced out correctly,
and add it to the HSI0 block.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20250104-exynos990-cmu-v1-2-9f54d69286d6@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The current implementation contains support for:
- CMU_TOP - which generates clocks for other blocks
- CMU_HSI0 - which generates clocks for USB31.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241209-exynos990-cmu-v4-3-57f07080f9e4@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
These PLLs are found in the Exynos990 SoC. The PLLs are similar
to pll0822x.
pll0717x and pll0718x are an exception, and they use the mdiv
mask from 1718X (that is, one bit smaller).
Apart from that, the masks/shifts are identical to those of 0822x.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241209-exynos990-cmu-v4-2-57f07080f9e4@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
CMU_TOP is the top level clock management unit which contains PLLs, muxes,
dividers and gates that feed the other clock management units.
CMU_PERIS provides clocks for GIC and MCT
CMU_FSYS0 provides clocks for USBDRD30
CMU_FSYS1 provides clocks for MMC, UFS and PCIE
CMU_PERIC0 provides clocks for UART_DBG, USI00 ~ USI03
CMU_PERIC1 provides clocks for SPI_CAM0/1, UART_BT, USI04 ~ USI13,
HSI2C_CAM0/1/2/3
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20241023090136.537395-4-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
These plls are found in the Exynos8895 SoC:
- pll1051x: Integer PLL with middle frequency
- pll1052x: Integer PLL with low frequency
The PLLs are similar enough to pll_0822x, so the same code can handle
all.
Locktime for 1051x, 1052x is 150 - the same as the pll_0822x
lock factor. MDIV, SDIV, PDIV masks and bit shifts are also the same
as 0822x.
When defining a PLL, the "con" parameter should be set to CON0
register, like this:
PLL(pll_1051x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0,
pll_shared0_rate_table),
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20241023090136.537395-3-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Enabling UFSHCD_CAP_HIBERN8_WITH_CLK_GATING in the UFS driver means
all UFS clocks are gated/ungated, which leads to the UFS IP getting
into a bad state and being completely non functional.
Downstream these clocks are all left in Automatic Clock Gate (ACG)
mode, and are not exposed to the UFS driver in DT. Enabling ACG is
ultimately what we need to do in the upstream Samsung clock driver
as well.
However until ACG is enabled upstream, we mark these clocks as
critical to avoid them being disabled. This then allow us to enable
UFSHCD_CAP_HIBERN8_WITH_CLK_GATING and have UFS hibern8.
Whilst this may seem at first glance a strange thing to do, the clocks
between UFS host and UFS device are still gated after this change, and
enabling UFS hibern8 leads to substantially cooler device when running
the upstream kernel on a Pixel 6 phone. This change only effects the
clocks from the CMU to the UFS IP.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241018130215.487425-1-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Register compatible and cmu_info data to support clocks.
CMU_PERIC1, this provides clocks for USI09 ~ USI17, USI_I2C and USI_I3C.
CMU_MISC, this provides clocks for MISC, GIC and OTP.
CMU_HSI0, this provides clocks for PCIE.
CMU_HSI1, this provides clocks for USB and MMC.
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Link: https://lore.kernel.org/r/20241009042110.2379903-3-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Samsung clock controller fixes for v6.12
Add missing sentinel in of_device_id table, so the code iterating over
it will not go over the size of an array.
Further code depends on the fixes branch.
|
|
Currently, there is no terminator entry for exynosautov920_cmu_of_match,
hence facing below KASAN warning,
BUG: KASAN: global-out-of-bounds in of_match_node+0x120/0x13c
Read of size 1 at addr ffffffe31cc9e628 by task swapper/0/1
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0+ #334
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x90/0xd0
print_report+0x1f4/0x5b4
kasan_report+0xc8/0x110
__asan_report_load1_noabort+0x20/0x2c
of_match_node+0x120/0x13c
of_match_device+0x70/0xb4
platform_match+0xa0/0x25c
__device_attach_driver+0x7c/0x2d4
bus_for_each_drv+0x100/0x188
__device_attach+0x174/0x364
device_initial_probe+0x14/0x20
bus_probe_device+0x128/0x158
device_add+0xb3c/0x10fc
of_device_add+0xdc/0x150
of_platform_device_create_pdata+0x120/0x20c
of_platform_bus_create+0x2bc/0x620
of_platform_populate+0x58/0x108
of_platform_default_populate_init+0x100/0x120
do_one_initcall+0x110/0x788
kernel_init_freeable+0x44c/0x61c
kernel_init+0x24/0x1e4
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
exynosautov920_cmu_of_match+0xc8/0x2c80
Add a dummy terminator entry at the end to assist of_match_node() in
traversing up to the terminator entry without accessing an
out-of-boundary index.
Fixes: 485e13fe2fb6 ("clk: samsung: add top clock support for ExynosAuto v920 SoC")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240927102104.3268790-1-ruanjinjie@huawei.com
[krzk: drop trailing comma]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Number of clocks supported by Linux drivers might vary - sometimes we
add new clocks, not exposed previously. Therefore these numbers of
clocks should not be in the bindings, as that prevents changing them.
Define number of clocks per each clock controller inside the driver
directly.
Signed-off-by: Inbaraj E <inbaraj.e@samsung.com>
Link: https://lore.kernel.org/r/20240917094355.37887-2-inbaraj.e@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Fix checkpatch errors from clock drivers.
ERROR: space prohibited before that ','
ERROR: space required after that ','
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20240926145132.1763-3-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Fix checkpatch giving warnings on driver files related to comment style.
WARNING: Block comments should align the * on each line which is
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20240926145132.1763-2-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This adds support for CMU_TOP which generates clocks for all the
function blocks such as CORE, HSI0/1/2, PERIC0/1 and so on. For
CMU_TOP, PLL_SHARED0,1,2,3,4 and 5 will be the sources of this block
and they will generate bus clocks.
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Link: https://lore.kernel.org/r/20240821232652.1077701-5-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
pll531x PLL is used in Exynos Auto v920 SoC for shared pll.
pll531x: Integer/fractional PLL with mid frequency FVCO (800 to 3120 MHz)
PLL531x
FOUT = (MDIV x FIN)/(PDIV x 2^SDIV) for integer PLL
FOUT = (MDIV + F/2^32-F[31]) x FIN/(PDIV x 2^SDIV) for fractional PLL
Signed-off-by: Sunyeal Hong <sunyeal.hong@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20240821232652.1077701-4-sunyeal.hong@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Exynos7885 SoC has a DWC3 USB Controller with Exynos USB PHY which in
theory supports USB3 SuperSpeed, but is only used as USB2 in all known
devices.
These clocks are needed for everything related to USB.
While at it, also remove the CLK_SET_RATE_PARENT capability of
CLK_MOUT_FSYS_USB30DRD_USER, since it's not actually needed.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240816175034.769628-3-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
pll1418x is used in Exynos7885 SoC for USB PHY clock.
Operation-wise it is very similar to pll0822x, except that MDIV is only
9 bits wide instead of 10, and we use the CON1 register in the PLL
macro's "con" parameter instead of CON3 like this:
PLL(pll_1418x, CLK_FOUT_USB_PLL, "fout_usb_pll", "oscclk",
PLL_LOCKTIME_PLL_USB, PLL_CON0_PLL_USB,
pll_usb_rate_table),
Technically the PLL should work fine with pll0822x code if the PLL
tables are correct, but it's more "correct" to actually update the mask.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240816175034.769628-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add dpum clock for exynosautov9.
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Link: https://lore.kernel.org/r/20240809-clk_dpum-v3-3-359decc30fe2@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
In Exynos7885 (and seemingly all modern Exynos SoCs) all PLLs have a MUX
attached to them controlled by bit 4 in the PLL's CON0 register.
These MUXes can select between OSCCLK or the PLL's output, essentially
making the PLL bypassable.
These weren't modeled in the driver because the vendor provided drivers
didn't model it properly, instead setting them when updating the PMS
values.
Not having them modeled didn't cause any problems in this case, since
these MUXes were set to the PLL's output by default, but this is not the
case everywhere in this SoC.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-6-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Update CLKS_NR_FSYS to the proper value after a fix in DT bindings.
This should always be the last clock in a CMU + 1.
Fixes: cd268e309c29 ("dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS")
Cc: stable@vger.kernel.org
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20240806121157.479212-5-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add TMU PCLK clock in CMU_PERI unit. It acts simultaneously as an
interface clock (to access TMU registers) and an operating clock which
makes TMU IP-core functional.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240723163311.28654-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Commit 0dc83ad8bfc9 ("clk: samsung: Don't register clkdev lookup for the
fixed rate clocks") claimed registering clkdev lookup is not necessary
anymore, but that was not entirely true: Exynos4210/4212/4412 clock code
still relied on it to get the clock rate of xxti or xusbxti external
clocks.
Drop that requirement by accessing already registered clk_hw when
looking up the xxti/xusbxti rate.
Reported-by: Artur Weber <aweber.kernel@gmail.com>
Closes: https://lore.kernel.org/all/6227c1fb-d769-462a-b79b-abcc15d3db8e@gmail.com/
Fixes: 0dc83ad8bfc9 ("clk: samsung: Don't register clkdev lookup for the fixed rate clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240722063309.60054-1-krzysztof.kozlowski@linaro.org
Tested-by: Artur Weber <aweber.kernel@gmail.com> # Exynos4212
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The system hangs on poweroff when this UFS clock is turned off, meaning
the system never powers down. For the moment mark the clock as critical.
Reviewed-by: Will McVicker <willmcvicker@google.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240628223506.1237523-5-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606161028.2986587-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
of_match_table/MODULE_DEVICE_TABLE
Since commit 9484f2cb8332 ("clk: samsung: exynos-clkout: convert to
module driver") this driver is instantiated as MFD-cell (matched by
platform device name) not as a real platform device created by OF code.
Remove then of_match_table and change related MODULE_DEVICE_TABLE to
simple MODULE_ALIAS to avoid further confusion.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20240510070653.537089-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"I'm actually surprised this time. There aren't any new Qualcomm SoC
clk drivers. And there's zero diff in the core clk framework.
Instead we have new clk drivers for STM and Sophgo, with
Samsung^WGoogle in third for the diffstat because they introduced HSI0
and HSI2 clk drivers for Google's GS101 SoC (high speed interface
things like PCIe, UFS, and MMC).
Beyond those big diffs there's the usual updates to various clk
drivers for incorrect parent descriptions or mising
MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for
the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and
add actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
dt-bindings: clocks: stm32mp25: add access-controllers description
clock, reset: microchip: move all mpfs reset code to the reset subsystem
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
dt-bindings: clock: fixed: Define a preferred node name
clk: meson: s4: fix module autoloading
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
...
|
|
Commit 4d11c62ca8d7 ("clkdev: report over-sized strings when creating
clkdev entries") revealed that clock lookup is registered for all fixed
clocks. The mentioned commit added a check if the registered name is not
too long. This fails for some clocks registered for Exynos542x SoCs family.
This lookup is a left-over from early common clock framework days, not
really needed nowadays, so remove it to avoid further issues.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240510065901.535124-1-m.szyprowski@samsung.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Drop static const arrays with HSI2 clocks parent data which are not
referenced by any clock. This might cause -Werror=unused-const-variable
warnings.
Reported-by: Stephen Boyd <sboyd@kernel.org>
Closes: https://lore.kernel.org/all/8bf65df598680f0785c3d6db70acfb9a.sboyd@kernel.org/
Fixes: 093c290084a4 ("clk: samsung: gs101: add support for cmu_hsi2")
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240507055948.34554-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The system hangs when any of these clocks are turned off.
With the introduction of pinctrl clock support [1], the approach taken
in this clock driver for the APM clocks to rely solely on the
clk_ignore_unused kernel command line option does not work anymore and
the system hangs during boot.
gout_apm_func is a parent clock to the clocks that are going to be
handled by the pinctrl driver [2], namely
gout_apm_apbif_gpio_alive_pclk and gout_apm_apbif_gpio_far_alive_pclk.
It also is the parent to the clocks marked as critical in this commit
here (and some others that aren't relevant for this commit)). This
means that once the pinctrl driver decides to turn off clocks, the
clock framework will subsequently turn off parent clocks of those
pinctrl clocks if they have no (apparent) user. Since gout_apm_func is
the parent, and since no drivers are hooked up to it or any of its
other children, gout_apm_func will be turned off. This will cause the
system to hang, as the clocks marked as critical in this commit stop
having an input.
We might have to add a driver for these clocks, but in the meantime
let's just ensure they stay on even if siblings are turned off.
For the avoidance of doubt: This commit doesn't mean that we can boot
without clk_ignore_unused.
Link: https://lore.kernel.org/r/20240426-samsung-pinctrl-busclock-v3-0-adb8664b8a7e@linaro.org [1]
Link: https://lore.kernel.org/r/20240429-samsung-pinctrl-busclock-dts-v1-0-5e935179f3ca@linaro.org [2]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240430-gs101-apm-clocks-v1-1-b2e2335e84f5@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
