| Age | Commit message (Collapse) | Author |
|---|
|
This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"
and then dereferences it on the next line. Two lines later, we take
a mutex so I don't think this is an RCU safe region. Re-order it to do
the dereferences before queuing up the free.
Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/aNKCL1jKwK8GRJHh@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The LIBIE_AQ_STR macro() introduced by commit 5feaa7a07b85 ("libie: add
adminq helper for converting err to str") is used in order to generate
strings for printing human readable error codes. Its definition is missing
the separating underscore ('_') character which makes the resulting strings
difficult to read. Additionally, the string won't match the source code,
preventing search tools from working properly.
Add the missing underscore character, fixing the error string names.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 5feaa7a07b85 ("libie: add adminq helper for converting err to str")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250923205657.846759-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Include MLX5E_FEC_RS_544_514_INTERLEAVED_QUAD in the FEC RS stats
handling. This addresses a gap introduced when adding support for
200G/lane link modes.
Fixes: 4e343c11efbb ("net/mlx5e: Support FEC settings for 200G per lane link modes")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When HWS creates multi-dest FW table and adds rules to
forward to other tables, ignore the flow level enforcement
in FW, because HWS is responsible for table levels.
This fixes the following error:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:818:(pid 192306):
SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x6ae84c), err(-22)
Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a kernel trace [1] caused by releasing an HWS action of a local flow
counter in mlx5_cmd_hws_delete_fte(), where the HWS action refcount and
mutex were not initialized and the counter struct could already be freed
when deleting the rule.
Fix it by adding the missing initializations and adding refcount for the
local flow counter struct.
[1] Kernel log:
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
mlx5_fs_put_hws_action.part.0.cold+0x21/0x94 [mlx5_core]
mlx5_fc_put_hws_action+0x96/0xad [mlx5_core]
mlx5_fs_destroy_fs_actions+0x8b/0x152 [mlx5_core]
mlx5_cmd_hws_delete_fte+0x5a/0xa0 [mlx5_core]
del_hw_fte+0x1ce/0x260 [mlx5_core]
mlx5_del_flow_rules+0x12d/0x240 [mlx5_core]
? ttwu_queue_wakelist+0xf4/0x110
mlx5_ib_destroy_flow+0x103/0x1b0 [mlx5_ib]
uverbs_free_flow+0x20/0x50 [ib_uverbs]
destroy_hw_idr_uobject+0x1b/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x34/0x1a0 [ib_uverbs]
uobj_destroy+0x3c/0x80 [ib_uverbs]
ib_uverbs_run_method+0x23e/0x360 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
ib_uverbs_cmd_verbs+0x14f/0x2c0 [ib_uverbs]
? do_tty_write+0x1a9/0x270
? file_tty_write.constprop.0+0x98/0xc0
? new_sync_write+0xfc/0x190
ib_uverbs_ioctl+0xd7/0x160 [ib_uverbs]
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x59/0x90
Fixes: b581f4266928 ("net/mlx5: fs, manage flow counters HWS action sharing by refcount")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1758525094-816583-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6
destination values to the source address field (saddr) when
processing pedit offsets within the destination address range.
This patch corrects the assignment to use daddr instead of saddr,
ensuring that pedit operations on IPv6 destination addresses are
applied correctly.
Fixes: 9b9eb518e338 ("bnxt_en: Add support for NAT(L3/L4 rewrite)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
i40e: virtchnl improvements
Przemek Kitszel says:
Improvements hardening PF-VF communication for i40e driver.
This patchset targets several issues that can cause undefined behavior
or be exploited in some other way.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: improve VF MAC filters accounting
i40e: add mask to apply valid bits for itr_idx
i40e: add max boundary check for VF filters
i40e: fix validation of VF state in get resources
i40e: fix input validation logic for action_meta
i40e: fix idx validation in config queues msg
i40e: fix idx validation in i40e_validate_queue_map
i40e: add validation for ring_len param
====================
Link: https://patch.msgid.link/20250919184959.656681-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Having a slash in the driver name leads to EIO being returned while
reading /sys/module/rvu_af/drivers content.
Remove DRV_STRING as it's not used anywhere.
Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Petr Malat <oss@malat.biz>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250918152106.1798299-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding new VM MAC, driver checks only *active* filters in
vsi->mac_filter_hash. Each MAC, even in non-active state is using resources.
To determine number of MACs VM uses, count VSI filters in *any* state.
Add i40e_count_all_filters() to simply count all filters, and rename
i40e_count_filters() to i40e_count_active_filters() to avoid ambiguity.
Fixes: cfb1d572c986 ("i40e: Add ensurance of MacVlan resources for every trusted VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ITR index (itr_idx) is only 2 bits wide. When constructing the
register value for QINT_RQCTL, all fields are ORed together. Without
masking, higher bits from itr_idx may overwrite adjacent fields in the
register.
Apply I40E_QINT_RQCTL_ITR_INDX_MASK to ensure only the intended bits are
set.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is no check for max filters that VF can request. Add it.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset.
Fixes: 61125b8be85d ("i40e: Fix failed opcode appearing if handling messages from VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix condition to check 'greater or equal' to prevent OOB dereference.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_vc_config_queues_msg().
Fixes: c27eac48160d ("i40e: Enable ADq and create queue channel/s on VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Kamakshi Nellore <nellorex.kamakshi@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_validate_queue_map().
Fixes: c27eac48160d ("i40e: Enable ADq and create queue channel/s on VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Kamakshi Nellore <nellorex.kamakshi@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
This is confirmed by a KASAN report:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800aa09a18 by task bash/136
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
otx2_ptp_init+0xb1/0x860
otx2_probe+0x4eb/0xc30
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 136:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
otx2_ptp_destroy+0x38/0x80
otx2_remove+0x10d/0x4c0
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a8984 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
Fixes: fdf24086f475 ("cnic: Defer iscsi connection cleanup")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit d24341740fe48add8a227a753e68b6eedf4b385a.
It causes errors when trying to configure QoS, as well as
loss of L2 connectivity (on multi-host devices).
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/20250910170011.70528106@kernel.org
Fixes: d24341740fe4 ("net/mlx5e: Update and set Xon/Xoff upon port speed set")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-16 (ice, i40e, ixgbe, igc)
For ice:
Jake resolves leaking pages with multi-buffer frames when a 0-sized
descriptor is encountered.
For i40e:
Maciej removes a redundant, and incorrect, memory barrier.
For ixgbe:
Jedrzej adjusts lifespan of ACI lock to ensure uses are while it is
valid.
For igc:
Kohei Enju does not fail probe on LED setup failure which resolves a
kernel panic in the cleanup path, if we were to fail.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: don't fail igc_probe() on LED setup error
ixgbe: destroy aci.lock later within ixgbe_remove path
ixgbe: initialize aci.lock before it's used
i40e: remove redundant memory barrier when cleaning Tx descs
ice: fix Rx page leak on multi-buffer frames
====================
Link: https://patch.msgid.link/20250916212801.2818440-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, VF MAC address info is not updated when the MAC address is
configured from VF, and it is not cleared when the VF is removed. This
leads to stale or missing MAC information in the PF, which may cause
incorrect state tracking or inconsistencies when VFs are hot-plugged
or reassigned.
Fix this by:
- storing the VF MAC address in the PF when it is set from VF
- clearing the stored VF MAC address when the VF is removed
This ensures that the PF always has correct VF MAC state.
Fixes: cde29af9e68e ("octeon_ep: add PF-VF mailbox communication")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250916133207.21737-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited commit adds a miss table for switchdev mode. But it
uses the same level as policy table. Will hit the following error
when running command:
# ip xfrm state add src 192.168.1.22 dst 192.168.1.21 proto \
esp spi 1001 reqid 10001 aead 'rfc4106(gcm(aes))' \
0x3a189a7f9374955d3817886c8587f1da3df387ff 128 \
mode tunnel offload dev enp8s0f0 dir in
Error: mlx5_core: Device failed to offload this state.
The dmesg error is:
mlx5_core 0000:03:00.0: ipsec_miss_create:578:(pid 311797): fail to create IPsec miss_rule err=-22
Fix it by adding a new miss level to avoid the error.
Fixes: 7d9e292ecd67 ("net/mlx5e: Move IPSec policy check after decryption")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1757939074-617281-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1757939074-617281-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When igc_led_setup() fails, igc_probe() fails and triggers kernel panic
in free_netdev() since unregister_netdev() is not called. [1]
This behavior can be tested using fault-injection framework, especially
the failslab feature. [2]
Since LED support is not mandatory, treat LED setup failures as
non-fatal and continue probe with a warning message, consequently
avoiding the kernel panic.
[1]
kernel BUG at net/core/dev.c:12047!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:free_netdev+0x278/0x2b0
[...]
Call Trace:
<TASK>
igc_probe+0x370/0x910
local_pci_probe+0x3a/0x80
pci_device_probe+0xd1/0x200
[...]
[2]
#!/bin/bash -ex
FAILSLAB_PATH=/sys/kernel/debug/failslab/
DEVICE=0000:00:05.0
START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \
| awk '{printf("0x%s", $1)}')
END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100)))
echo $START_ADDR > $FAILSLAB_PATH/require-start
echo $END_ADDR > $FAILSLAB_PATH/require-end
echo 1 > $FAILSLAB_PATH/times
echo 100 > $FAILSLAB_PATH/probability
echo N > $FAILSLAB_PATH/ignore-gfp-wait
echo $DEVICE > /sys/bus/pci/drivers/igc/bind
Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There's another issue with aci.lock and previous patch uncovers it.
aci.lock is being destroyed during removing ixgbe while some of the
ixgbe closing routines are still ongoing. These routines use Admin
Command Interface which require taking aci.lock which has been already
destroyed what leads to call trace.
[ +0.000004] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ +0.000007] WARNING: CPU: 12 PID: 10277 at kernel/locking/mutex.c:155 mutex_lock+0x5f/0x70
[ +0.000002] Call Trace:
[ +0.000003] <TASK>
[ +0.000006] ixgbe_aci_send_cmd+0xc8/0x220 [ixgbe]
[ +0.000049] ? try_to_wake_up+0x29d/0x5d0
[ +0.000009] ixgbe_disable_rx_e610+0xc4/0x110 [ixgbe]
[ +0.000032] ixgbe_disable_rx+0x3d/0x200 [ixgbe]
[ +0.000027] ixgbe_down+0x102/0x3b0 [ixgbe]
[ +0.000031] ixgbe_close_suspend+0x28/0x90 [ixgbe]
[ +0.000028] ixgbe_close+0xfb/0x100 [ixgbe]
[ +0.000025] __dev_close_many+0xae/0x220
[ +0.000005] dev_close_many+0xc2/0x1a0
[ +0.000004] ? kernfs_should_drain_open_files+0x2a/0x40
[ +0.000005] unregister_netdevice_many_notify+0x204/0xb00
[ +0.000006] ? __kernfs_remove.part.0+0x109/0x210
[ +0.000006] ? kobj_kset_leave+0x4b/0x70
[ +0.000008] unregister_netdevice_queue+0xf6/0x130
[ +0.000006] unregister_netdev+0x1c/0x40
[ +0.000005] ixgbe_remove+0x216/0x290 [ixgbe]
[ +0.000021] pci_device_remove+0x42/0xb0
[ +0.000007] device_release_driver_internal+0x19c/0x200
[ +0.000008] driver_detach+0x48/0x90
[ +0.000003] bus_remove_driver+0x6d/0xf0
[ +0.000006] pci_unregister_driver+0x2e/0xb0
[ +0.000005] ixgbe_exit_module+0x1c/0xc80 [ixgbe]
Same as for the previous commit, the issue has been highlighted by the
commit 337369f8ce9e ("locking/mutex: Add MUTEX_WARN_ON() into fast path").
Move destroying aci.lock to the end of ixgbe_remove(), as this
simply fixes the issue.
Fixes: 4600cdf9f5ac ("ixgbe: Enable link management in E610 device")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently aci.lock is initialized too late. A bunch of ACI callbacks
using the lock are called prior it's initialized.
Commit 337369f8ce9e ("locking/mutex: Add MUTEX_WARN_ON() into fast path")
highlights that issue what results in call trace.
[ 4.092899] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 4.092910] WARNING: CPU: 0 PID: 578 at kernel/locking/mutex.c:154 mutex_lock+0x6d/0x80
[ 4.098757] Call Trace:
[ 4.098847] <TASK>
[ 4.098922] ixgbe_aci_send_cmd+0x8c/0x1e0 [ixgbe]
[ 4.099108] ? hrtimer_try_to_cancel+0x18/0x110
[ 4.099277] ixgbe_aci_get_fw_ver+0x52/0xa0 [ixgbe]
[ 4.099460] ixgbe_check_fw_error+0x1fc/0x2f0 [ixgbe]
[ 4.099650] ? usleep_range_state+0x69/0xd0
[ 4.099811] ? usleep_range_state+0x8c/0xd0
[ 4.099964] ixgbe_probe+0x3b0/0x12d0 [ixgbe]
[ 4.100132] local_pci_probe+0x43/0xa0
[ 4.100267] work_for_cpu_fn+0x13/0x20
[ 4.101647] </TASK>
Move aci.lock mutex initialization to ixgbe_sw_init() before any ACI
command is sent. Along with that move also related SWFW semaphore in
order to reduce size of ixgbe_probe() and that way all locks are
initialized in ixgbe_sw_init().
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Fixes: 4600cdf9f5ac ("ixgbe: Enable link management in E610 device")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
i40e has a feature which writes to memory location last descriptor
successfully sent. Memory barrier in i40e_clean_tx_irq() was used to
avoid forward-reading descriptor fields in case DD bit was not set.
Having mentioned feature in place implies that such situation will not
happen as we know in advance how many descriptors HW has dealt with.
Besides, this barrier placement was wrong. Idea is to have this
protection *after* reading DD bit from HW descriptor, not before.
Digging through git history showed me that indeed barrier was before DD
bit check, anyways the commit introducing i40e_get_head() should have
wiped it out altogether.
Also, there was one commit doing s/read_barrier_depends/smp_rmb when get
head feature was already in place, but it was only theoretical based on
ixgbe experiences, which is different in these terms as that driver has
to read DD bit from HW descriptor.
Fixes: 1943d8ba9507 ("i40e/i40evf: enable hardware feature head write back")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each
buffer in the current frame. This function was introduced as part of
handling multi-buffer XDP support in the ice driver.
It works by iterating over the buffers from first_desc up to 1 plus the
total number of fragments in the frame, cached from before the XDP program
was executed.
If the hardware posts a descriptor with a size of 0, the logic used in
ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added
as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a
fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't
call ice_put_rx_buf().
Because we don't call ice_put_rx_buf(), we don't attempt to re-use the
page or free it. This leaves a stale page in the ring, as we don't
increment next_to_alloc.
The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented
properly, and that it always points to a buffer with a NULL page. Since
this function doesn't check, it will happily recycle a page over the top
of the next_to_alloc buffer, losing track of the old page.
Note that this leak only occurs for multi-buffer frames. The
ice_put_rx_mbuf() function always handles at least one buffer, so a
single-buffer frame will always get handled correctly. It is not clear
precisely why the hardware hands us descriptors with a size of 0 sometimes,
but it happens somewhat regularly with "jumbo frames" used by 9K MTU.
To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on
all buffers between first_desc and next_to_clean. Borrow the logic of a
similar function in i40e used for this same purpose. Use the same logic
also in ice_get_pgcnts().
Instead of iterating over just the number of fragments, use a loop which
iterates until the current index reaches to the next_to_clean element just
past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does
call ice_put_rx_buf() on the last buffer of the frame indicating the end of
packet.
For non-linear (multi-buffer) frames, we need to take care when adjusting
the pagecnt_bias. An XDP program might release fragments from the tail of
the frame, in which case that fragment page is already released. Only
update the pagecnt_bias for the first descriptor and fragments still
remaining post-XDP program. Take care to only access the shared info for
fragmented buffers, as this avoids a significant cache miss.
The xdp_xmit value only needs to be updated if an XDP program is run, and
only once per packet. Drop the xdp_xmit pointer argument from
ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function
directly. This avoids needing to pass the argument and avoids an extra
bit-wise OR for each buffer in the frame.
Move the increment of the ntc local variable to ensure its updated *before*
all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic
requires the index of the element just after the current frame.
Now that we use an index pointer in the ring to identify the packet, we no
longer need to track or cache the number of fragments in the rx_ring.
Cc: Christoph Petrausch <christoph.petrausch@deepl.com>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Closes: https://lore.kernel.org/netdev/CAK8fFZ4hY6GUJNENz3wY9jaYLZXGfpr7dnZxzGMYoE44caRbgw@mail.gmail.com/
Fixes: 743bbd93cf29 ("ice: put Rx buffers after being done with current frame")
Tested-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Priya Singh <priyax.singh@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
`netif_rx()` already increments `rx_dropped` core stat when it fails.
The driver was also updating `ndev->stats.rx_dropped` in the same path.
Since both are reported together via `ip -s -s` command, this resulted
in drops being counted twice in user-visible stats.
Keep the driver update on `if (unlikely(!skb))`, but skip it after
`netif_rx()` errors.
Fixes: caf586e5f23c ("net: add a core netdev->rx_dropped counter")
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250913060135.35282-3-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the protection override dump path, the firmware can return far too
many GRC elements, resulting in attempting to write past the end of the
previously-kmalloc'ed dump buffer.
This will result in a kernel panic with reason:
BUG: unable to handle kernel paging request at ADDRESS
where "ADDRESS" is just past the end of the protection override dump
buffer. The start address of the buffer is:
p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf
and the size of the buffer is buf_size in the same data structure.
The panic can be arrived at from either the qede Ethernet driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc02662ed [qed]
qed_dbg_protection_override_dump at ffffffffc0267792 [qed]
qed_dbg_feature at ffffffffc026aa8f [qed]
qed_dbg_all_data at ffffffffc026b211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc027298a [qed]
devlink_health_do_dump at ffffffff82497f61
devlink_health_report at ffffffff8249cf29
qed_report_fatal_error at ffffffffc0272baf [qed]
qede_sp_task at ffffffffc045ed32 [qede]
process_one_work at ffffffff81d19783
or the qedf storage driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc068b2ed [qed]
qed_dbg_protection_override_dump at ffffffffc068c792 [qed]
qed_dbg_feature at ffffffffc068fa8f [qed]
qed_dbg_all_data at ffffffffc0690211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc069798a [qed]
devlink_health_do_dump at ffffffff8aa95e51
devlink_health_report at ffffffff8aa9ae19
qed_report_fatal_error at ffffffffc0697baf [qed]
qed_hw_err_notify at ffffffffc06d32d7 [qed]
qed_spq_post at ffffffffc06b1011 [qed]
qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed]
qedf_cleanup_fcport at ffffffffc05e7597 [qedf]
qedf_rport_event_handler at ffffffffc05e7bf7 [qedf]
fc_rport_work at ffffffffc02da715 [libfc]
process_one_work at ffffffff8a319663
Resolve this by clamping the firmware's return value to the maximum
number of legal elements the firmware should return.
Fixes: d52c89f120de8 ("qed*: Utilize FW 8.37.2.0")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/f8e1182934aa274c18d0682a12dbaf347595469c.1757485536.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper to validate the VF ID and use it in the VF ndo ops to
prevent accessing out-of-range entries.
Without this check, users can run commands such as:
# ip link show dev enp135s0
2: enp135s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:00:00:01:01:00 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state enable, trust off
vf 1 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state enable, trust off
# ip link set dev enp135s0 vf 4 mac 00:00:00:00:00:14
# echo $?
0
even though VF 4 does not exist, which results in silent success instead
of returning an error.
Fixes: 8a241ef9b9b8 ("octeon_ep: add ndo ops for VFs in PF driver")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250911223610.1803144-1-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with commit c50e7475961c ("dpaa2-switch: Fix error checking in
dpaa2_switch_seed_bp()"), the probing of a second DPSW object errors out
like below.
fsl_dpaa2_switch dpsw.1: fsl_mc_driver_probe failed: -12
fsl_dpaa2_switch dpsw.1: probe with driver fsl_dpaa2_switch failed with error -12
The aforementioned commit brought to the surface the fact that seeding
buffers into the buffer pool destined for control traffic is not
successful and an access violation recoverable error can be seen in the
MC firmware log:
[E, qbman_rec_isr:391, QBMAN] QBMAN recoverable event 0x1000000
This happens because the driver incorrectly used the ID of the DPBP
object instead of the hardware buffer pool ID when trying to release
buffers into it.
This is because any DPSW object uses two buffer pools, one managed by
the Linux driver and destined for control traffic packet buffers and the
other one managed by the MC firmware and destined only for offloaded
traffic. And since the buffer pool managed by the MC firmware does not
have an external facing DPBP equivalent, any subsequent DPBP objects
created after the first DPSW will have a DPBP id different to the
underlying hardware buffer ID.
The issue was not caught earlier because these two numbers can be
identical when all DPBP objects are created before the DPSW objects are.
This is the case when the DPL file is used to describe the entire DPAA2
object layout and objects are created at boot time and it's also true
for the first DPSW being created dynamically using ls-addsw.
Fix this by using the buffer pool ID instead of the DPBP id when
releasing buffers into the pool.
Fixes: 2877e4f7e189 ("staging: dpaa2-switch: setup buffer pool and RX path rings")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250910144825.2416019-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because mlx5e_link_info and mlx5e_ext_link_info have holes
e.g. Azure mlx5 reports PTYS 19. Do not return it unless speed
is retrieved successfully.
Fixes: 65a5d35571849 ("net/mlx5: Refactor link speed handling with mlx5_link_info struct")
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250910003732.5973-1-litian@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock.
On the other hand, before return the port device, we need to hold the
device reference to avoid UaF in the caller function.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 9c10dd8eed74 ("net: hsr: Create and export hsr_get_port_ndev()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The i40e hardware has multiple hardware settings which define the Maximum
Frame Size (MFS) of the physical port. The firmware has an AdminQ command
(0x0603) to configure the MFS, but the i40e Linux driver never issues this
command.
In most cases this is no problem, as the NVM default value has the device
configured for its maximum value of 9728. Unfortunately, recent versions of
the iPXE intelxl driver now issue the 0x0603 Set Mac Config command,
modifying the MFS and reducing it from its default value of 9728.
This occurred as part of iPXE commit 6871a7de705b ("[intelxl] Use admin
queue to set port MAC address and maximum frame size"), a prerequisite
change for supporting the E800 series hardware in iPXE. Both the E700 and
E800 firmware support the AdminQ command, and the iPXE code shares much of
the logic between the two device drivers.
The ice E800 Linux driver already issues the 0x0603 Set Mac Config command
early during probe, and is thus unaffected by the iPXE change.
Since commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set"), the
i40e driver does check the I40E_PRTGL_SAH register, but it only logs a
warning message if its value is below the 9728 default. This register also
only covers received packets and not transmitted packets. A warning can
inform system administrators, but does not correct the issue. No
interactions from userspace cause the driver to write to PRTGL_SAH or issue
the 0x0603 AdminQ command. Only a GLOBR reset will restore the value to its
default value. There is no obvious method to trigger a GLOBR reset from
user space.
To fix this, introduce the i40e_aq_set_mac_config() function, similar to
the one from the ice driver. Call this during early probe to ensure that
the device configuration matches driver expectation. Unlike E800, the E700
firmware also has a bit to control whether the MAC should append CRC data.
It is on by default, but setting a 0 to this bit would disable CRC. The
i40e implementation must set this bit to ensure CRC will be appended by the
MAC.
In addition to the AQ command, instead of just checking the I40E_PRTGL_SAH
register, update its value to the 9728 default and write it back. This
ensures that the hardware is in the expected state, regardless of whether
the iPXE (or any other early boot driver) has modified this state.
This is a better user experience, as we now fix the issues with larger MTU
instead of merely warning. It also aligns with the way the ice E800 series
driver works.
A final note: The Fixes tag provided here is not strictly accurate. The
issue occurs as a result of an external entity (the iPXE intelxl driver),
and this is not a regression specifically caused by the mentioned change.
However, I believe the original change to just warn about PRTGL_SAH being
too low was an insufficient fix.
Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set")
Link: https://github.com/ipxe/ipxe/commit/6871a7de705b6f6a4046f0d19da9bcd689c3bc8e
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration
later than the first, the error path wants to free the IRQs requested
so far. However, it uses the wrong dev_id argument for free_irq(), so
it does not free the IRQs correctly and instead triggers the warning:
Trying to free already-free IRQ 173
WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0
Modules linked in: i40e(+) [...]
CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:__free_irq+0x192/0x2c0
[...]
Call Trace:
<TASK>
free_irq+0x32/0x70
i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e]
i40e_vsi_request_irq+0x79/0x80 [i40e]
i40e_vsi_open+0x21f/0x2f0 [i40e]
i40e_open+0x63/0x130 [i40e]
__dev_open+0xfc/0x210
__dev_change_flags+0x1fc/0x240
netif_change_flags+0x27/0x70
do_setlink.isra.0+0x341/0xc70
rtnl_newlink+0x468/0x860
rtnetlink_rcv_msg+0x375/0x450
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x288/0x3c0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x3a2/0x3d0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x82/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Use the same dev_id for free_irq() as for request_irq().
I tested this with inserting code to fail intentionally.
Fixes: 493fb30011b3 ("i40e: Move q_vectors from pointer to array to array of pointers")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The igb driver incorrectly skips the link test when the network
interface is admin down (if_running == false), causing the test to
always report PASS regardless of the actual physical link state.
This behavior is inconsistent with other drivers (e.g. i40e, ice, ixgbe,
etc.) which correctly test the physical link state regardless of admin
state.
Remove the if_running check to ensure link test always reflects the
physical link state.
Fixes: 8d420a1b3ea6 ("igb: correct link test not being run when link is down")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The igb driver currently causes a NULL pointer dereference when executing
the ethtool loopback test. This occurs because there is no associated
q_vector for the test ring when it is set up, as interrupts are typically
not added to the test rings.
Since commit 5ef44b3cb43b removed the napi_id assignment in
__xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it.
Therefore, simply use 0 as the last parameter.
Fixes: 2c6196013f84 ("igb: Add AF_XDP zero-copy Rx support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Tianyu Xu <tianyxu@cisco.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The function of_phy_find_device may return NULL, so we need to take
care before dereferencing phy_dev.
Fixes: 64a632da538a ("net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250904091334.53965-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now when SRIOV is enabled, PF with multiple queues can only receive
all packets on queue 0. This is caused by an incorrect flag judgement,
which prevents RSS from being enabled.
In fact, RSS is supported for the functions when SRIOV is enabled.
Remove the flag judgement to fix it.
Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A3B7449A08A044D0+20250904024322.87145-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data.
Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support")
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20250903025213.3120181-1-abin.joseph@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All paths in probe that call goto defer do so before assigning phydev
and thus it makes sense to cleanup the prior index. It also fixes a bug
where index 0 does not get cleaned up.
Fixes: b7d3e3d3d21a ("net: thunderx: Don't leak phy device references on -EPROBE_DEFER condition.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213314.48599-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy_np needs to get freed, just like the other child nodes.
Fixes: 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213018.47392-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-02 (ice, idpf, i40e, ixgbe, e1000e)
For ice:
Jake adds checks for initialization of Tx timestamp tracking structure
to prevent NULL pointer dereferences.
For idpf:
Josh moves freeing of auxiliary device id to prevent use-after-free issue.
Emil sets, expected, MAC type value when sending virtchnl add/delete MAC
commands.
For i40e:
Jake removes read debugfs access as 'netdev_ops' has the possibility to
overflow.
Zhen Ni adds handling for when MAC list is empty.
For ixgbe:
Alok Tiwari corrects bitmap being used for link speeds.
For e1000e:
Vitaly adds check to ensure overflow does not occur in
e1000_set_eeprom().
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: fix heap overflow in e1000_set_eeprom
ixgbe: fix incorrect map used in eee linkmode
i40e: Fix potential invalid access when MAC list is empty
i40e: remove read access to debugfs files
idpf: set mac type when adding and removing MAC filters
idpf: fix UAF in RDMA core aux dev deinitialization
ice: fix NULL access of tx->in_use in ice_ll_ts_intr
ice: fix NULL access of tx->in_use in ice_ptp_ts_irq
====================
Link: https://patch.msgid.link/20250902232131.2739555-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending llc packets with vlan tx offload, the hardware fails to
actually add the tag. Deal with this by fixing it up in software.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Reported-by: Thibaut VARENE <hacks@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250831182007.51619-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix sparse warnings about endianness. Store DMA addr to a variable
of correct type and then only convert it when writing to the descriptor.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901210818.1025316-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 8401a108a63302a5a198c7075d857895ca624851.
I got a report from an (anonymous) Sundance user:
Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
Revert the driver back in. Make following changes:
- update Denis's email address in MAINTAINERS
- adjust to timer API renames:
- del_timer_sync() -> timer_delete_sync()
- from_timer() -> timer_container_of()
Fixes: 8401a108a633 ("eth: remove the DLink/Sundance (ST201) driver")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901210818.1025316-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Co-developed-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
incorrectly used ixgbe_lp_map in loops intended to populate the
supported and advertised EEE linkmode bitmaps based on ixgbe_ls_map.
This results in incorrect bit setting and potential out-of-bounds
access, since ixgbe_lp_map and ixgbe_ls_map have different sizes
and purposes.
ixgbe_lp_map[i] -> ixgbe_ls_map[i]
Use ixgbe_ls_map for supported and advertised linkmodes, and keep
ixgbe_lp_map usage only for link partner (lp_advertised) mapping.
Fixes: 9356b6db9d05 ("net: ethernet: ixgbe: Convert EEE to use linkmodes")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
