summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
8 dayswifi: virt_wifi: Fix page fault on connectJames Guan
This patch prevents page fault in __cfg80211_connect_result()[1] when connecting a virt_wifi device, while ensuring that virt_wifi can connect properly. [1] https://lore.kernel.org/linux-wireless/20250909063213.1055024-1-guan_yufei@163.com/ Closes: https://lore.kernel.org/linux-wireless/20250909063213.1055024-1-guan_yufei@163.com/ Signed-off-by: James Guan <guan_yufei@163.com> Link: https://patch.msgid.link/20250910111929.137049-1-guan_yufei@163.com [remove irrelevant network-manager instructions] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
8 daysMerge tag 'iwlwifi-fixes-2025-09-09' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi fix ==================== Which is a fix for (old) 130/1030 devices to work again. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
9 dayswifi: iwlwifi: fix 130/1030 configsJohannes Berg
The 130/1030 devices are really derivatives of 6030, with some small differences not pertaining to the MAC, so they must use the 6030 MAC config. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220472 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220517 Fixes: 35ac275ebe0c ("wifi: iwlwifi: cfg: finish config split") Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250909121728.8e4911f12528.I3aa7194012a4b584fbd5ddaa3a77e483280f1de4@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
10 dayswifi: ath12k: fix WMI TLV header misalignmentMiaoqing Pan
When buf_len is not 4-byte aligned in ath12k_wmi_mgmt_send(), the firmware asserts and triggers a recovery. The following error messages are observed: ath12k_pci 0004:01:00.0: failed to submit WMI_MGMT_TX_SEND_CMDID cmd ath12k_pci 0004:01:00.0: failed to send mgmt frame: -108 ath12k_pci 0004:01:00.0: failed to tx mgmt frame, vdev_id 0 :-108 ath12k_pci 0004:01:00.0: waiting recovery start... This issue was observed when running 'iw wlanx set power_save off/on' in MLO station mode, which triggers the sending of an SMPS action frame with a length of 27 bytes to the AP. To resolve the misalignment, use buf_len_aligned instead of buf_len when constructing the WMI TLV header. Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20250908015139.1301437-1-miaoqing.pan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
10 dayswifi: ath12k: Fix missing station power save configurationMiaoqing Pan
Commit afbab6e4e88d ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed() for MLO") replaced the bss_info_changed() callback with vif_cfg_changed() and link_info_changed() to support Multi-Link Operation (MLO). As a result, the station power save configuration is no longer correctly applied in ath12k_mac_bss_info_changed(). Move the handling of 'BSS_CHANGED_PS' into ath12k_mac_op_vif_cfg_changed() to align with the updated callback structure introduced for MLO, ensuring proper power-save behavior for station interfaces. Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: afbab6e4e88d ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed() for MLO") Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20250908015025.1301398-1-miaoqing.pan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-09-03Merge tag 'ath-current-20250902' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git update for v6.17-rc5 Fix a long-standing issue with ath11k dropping group data packets during GTK rekey, and fix an omission in the ath12k multi-link EMLSR support introduced in v6.16. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-03wifi: wilc1000: avoid buffer overflow in WID string configurationAjay.Kathat@microchip.com
Fix the following copy overflow warning identified by Smatch checker. drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame() error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537) This patch introduces size check before accessing the memory buffer. The checks are base on the WID type of received data from the firmware. For WID string configuration, the size limit is determined by individual element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field of 'struct wilc_cfg_str'. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/aLFbr9Yu9j_TQTey@stanley.mountain Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Link: https://patch.msgid.link/20250829225829.5423-1-ajay.kathat@microchip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-03wifi: libertas: cap SSID len in lbs_associate()Dan Carpenter
If the ssid_eid[1] length is more that 32 it leads to memory corruption. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/2a40f5ec7617144aef412034c12919a4927d90ad.1756456951.git.dan.carpenter@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-03wifi: cw1200: cap SSID length in cw1200_do_join()Dan Carpenter
If the ssidie[1] length is more that 32 it leads to memory corruption. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/e91fb43fcedc4893b604dfb973131661510901a7.1756456951.git.dan.carpenter@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-09-02wifi: ath11k: fix group data packet drops during rekeyRameshkumar Sundaram
During GTK rekey, mac80211 issues a clear key (if the old key exists) followed by an install key operation in the same context. This causes ath11k to send two WMI commands in quick succession: one to clear the old key and another to install the new key in the same slot. Under certain conditions—especially under high load or time sensitive scenarios, firmware may process these commands asynchronously in a way that firmware assumes the key is cleared whereas hardware has a valid key. This inconsistency between hardware and firmware leads to group addressed packet drops. Only setting the same key again can restore a valid key in firmware and allow packets to be transmitted. This issue remained latent because the host's clear key commands were not effective in firmware until commit 436a4e886598 ("ath11k: clear the keys properly via DISABLE_KEY"). That commit enabled the host to explicitly clear group keys, which inadvertently exposed the race. To mitigate this, restrict group key clearing across all modes (AP, STA, MESH). During rekey, the new key can simply be set on top of the previous one, avoiding the need for a clear followed by a set. However, in AP mode specifically, permit group key clearing when no stations are associated. This exception supports transitions from secure modes (e.g., WPA2/WPA3) to open mode, during which all associated peers are removed and the group key is cleared as part of the transition. Add a per-BSS station counter to track the presence of stations during set key operations. Also add a reset_group_keys flag to track the key re-installation state and avoid repeated installation of the same key when the number of connected stations transitions to non-zero within a rekey period. Additionally, for AP and Mesh modes, when the first station associates, reinstall the same group key that was last set. This ensures that the firmware recovers from any race that may have occurred during a previous key clear when no stations were associated. This change ensures that key clearing is permitted only when no clients are connected, avoiding packet loss while enabling dynamic security mode transitions. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Reported-by: Steffen Moser <lists@steffen-moser.de> Closes: https://lore.kernel.org/linux-wireless/c6366409-9928-4dd7-bf7b-ba7fcf20eabf@steffen-moser.de Fixes: 436a4e886598 ("ath11k: clear the keys properly via DISABLE_KEY") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Tested-by: Nicolas Escande <nico.escande@gmail.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250810170018.1124014-1-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-09-02wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stationsRamya Gnanasekar
Currently, when updating EMLSR capabilities of a multi-link (ML) station, only the EMLSR parameters (e.g., padding delay, transition delay, and timeout) are sent to firmware. However, firmware also requires the EMLSR support flag to be set in the MLO flags of the peer assoc WMI command to properly handle EML operating mode notification frames. Set the ATH12K_WMI_FLAG_MLO_EMLSR_SUPPORT flag in the peer assoc WMI command when the ML station is EMLSR-capable, so that the firmware can respond to EHT EML action frames from associated stations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 4bcf9525bc49 ("wifi: ath12k: update EMLSR capabilities of ML Station") Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250801104920.3326352-1-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-08-28Merge tag 'iwlwifi-fixes-2025-08-28' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== a few fixes, mainly of the cfg rework. ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-08-28wifi: iwlwifi: cfg: add back more lost PCI IDsJohannes Berg
Add back a few more PCI IDs to the config match table that evidently I lost during the cleanups. Fixes: 1fb053d9876f ("wifi: iwlwifi: cfg: remove unnecessary configs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250828095500.46fee422651e.I8f6c3e9eea9523bb1658f5690b715eb443740e07@changeid
2025-08-28wifi: iwlwifi: fix byte count table for old devicesJohannes Berg
For devices handled by iwldvm, bc_table_dword was never set, but I missed that during the removal thereof. Change the logic to not treat the byte count table as dwords for devices older than 9000 series to fix that. Fixes: 6570ea227826 ("wifi: iwlwifi: remove bc_table_dword transport config") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250828095500.eccd7d3939f1.Ibaffa06d0b3aa5f35a9451d94af34de208b8a2bc@changeid
2025-08-28wifi: iwlwifi: cfg: restore some 1000 series configsJohannes Berg
In the fixed commit, I inadvertently removed two configurations while combining the 0x0083/0x0084 device IDs. Replace the fixed matches for the BG versions by a masked match and add the BGN version back with a similar masked match. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220477 Fixes: 1fb053d9876f ("wifi: iwlwifi: cfg: remove unnecessary configs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250828095500.fabb99c2df9e.If0ad87bf9ab360da5f613e879fd416c17c544733@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-08-28Merge tag 'mt76-fixes-2025-08-27' of https://github.com/nbd168/wirelessJohannes Berg
Felix Fietkay says: =================== mt76 fixes for 6.17 - fix regressions from mt7996 MLO support rework - fix offchannel handling issues on mt7996 - mt792x fixes - fix multiple wcid linked list corruption issues =================== Change-Id: Ib3e9a3217a40b9da69e122514d47fa46699c864b Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-08-28wifi: mwifiex: Initialize the chan_stats array to zeroQianfeng Rong
The adapter->chan_stats[] array is initialized in mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out memory. The array is filled in mwifiex_update_chan_statistics() and then the user can query the data in mwifiex_cfg80211_dump_survey(). There are two potential issues here. What if the user calls mwifiex_cfg80211_dump_survey() before the data has been filled in. Also the mwifiex_update_chan_statistics() function doesn't necessarily initialize the whole array. Since the array was not initialized at the start that could result in an information leak. Also this array is pretty small. It's a maximum of 900 bytes so it's more appropriate to use kcalloc() instead vmalloc(). Cc: stable@vger.kernel.org Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/20250815023055.477719-1-rongqianfeng@vivo.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-08-28wifi: iwlwifi: uefi: check DSM item validityJohannes Berg
The first array index is a bitmap indicating which of the other values are valid. Check that bitmap before returning a value. Fixes: fc7214c3c986 ("wifi: iwlwifi: read DSM functions from UEFI") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220085 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250828095500.59ec52ff865e.I9e11f497a029eb38f481b2c90c43c0935285216d@changeid
2025-08-28wifi: iwlwifi: acpi: check DSM func validityJohannes Berg
The DSM func 0 (DSM_FUNC_QUERY) returns a bitmap of which other functions contain valid data, query and check it before returning other functions data. Fixes: 9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220085 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250828095500.881e17ff8f6a.Ic6d92997d9d5fad127919d6e1b830cd3fe944468@changeid
2025-08-28wifi: iwlwifi: if scratch is ~0U, consider it a failureEmmanuel Grumbach
We want to see bits being set in the scratch register upon resume, but if all the bits are set, it means that we were kicked out of the PCI bus and that clearly doesn't mean we can assume the firmware is still alive after the suspend / resume cycle. Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250828095500.0f203e559242.I59eff718cb5fda575db41081a1a389f7af488717@changeid
2025-08-27wifi: mt76: fix linked list corruptionFelix Fietkau
Never leave scheduled wcid entries on the temporary on-stack list Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx") Link: https://patch.msgid.link/20250827085352.51636-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: free pending offchannel tx frames on wcid cleanupFelix Fietkau
Avoid leaking them or keeping the wcid on the tx list Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx") Link: https://patch.msgid.link/20250827085352.51636-5-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7915: fix list corruption after hardware restartFelix Fietkau
Since stations are recreated from scratch, all lists that wcids are added to must be cleared before calling ieee80211_restart_hw. Set wcid->sta = 0 for each wcid entry in order to ensure that they are not added again before they are ready. Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support") Link: https://patch.msgid.link/20250827085352.51636-4-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7996: add missing check for rx wcid entriesFelix Fietkau
Non-station wcid entries must not be passed to the rx functions. In case of the global wcid entry, it could even lead to corruption in the wcid array due to pointer being casted to struct mt7996_sta_link using container_of. Fixes: 7464b12b7d92 ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO") Link: https://patch.msgid.link/20250827085352.51636-3-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: do not add non-sta wcid entries to the poll listFelix Fietkau
Polling and airtime reporting is valid for station entries only Link: https://patch.msgid.link/20250827085352.51636-2-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7996: fix crash on some tx status reportsFelix Fietkau
When a wcid can't be found, link_sta can be stale from a previous batch. The code currently assumes that if link_sta is set, wcid is also non-zero. Fix wcid NULL pointer dereference by resetting link_sta when a wcid entry can't be found. Fixes: 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()") Link: https://patch.msgid.link/20250827085352.51636-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7996: use the correct vif link for scanning/rocChad Monroe
restore fix which was dropped during MLO rework Fixes: f0b0b239b8f3 ("wifi: mt76: mt7996: rework mt7996_mac_write_txwi() for MLO support") Signed-off-by: Chad Monroe <chad@monroe.io> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/180fffd409aa57f535a3d2c1951e41ae398ce09e.1754659732.git.chad@monroe.io Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7996: disable beacons when going offchannelFelix Fietkau
Avoid leaking beacons on unrelated channels during scanning/roc Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support") Reported-by: Chad Monroe <chad.monroe@adtran.com> Link: https://patch.msgid.link/20250813121106.81559-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: prevent non-offchannel mgmt tx during scan/rocFelix Fietkau
Only put probe request packets in the offchannel queue if IEEE80211_TX_CTRL_DONT_USE_RATE_MASK is set and IEEE80211_TX_CTL_TX_OFFCHAN is unset. Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx") Reported-by: Chad Monroe <chad.monroe@adtran.com> Link: https://patch.msgid.link/20250813121106.81559-2-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7925: skip EHT MLD TLV on non-MLD and pass conn_state for sta_cmdMing Yen Hsieh
Return early in mt7925_mcu_sta_eht_mld_tlv() for non-MLD vifs to avoid bogus MLD TLVs, and pass the proper connection state to sta_basic TLV. Cc: stable@vger.kernel.org Fixes: cb1353ef3473 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd") Reported-by: Tal Inbar <inbartdev@gmail.com> Tested-by: Tal Inbar <inbartdev@gmail.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250818030201.997940-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7925u: use connac3 tx aggr check in tx completeMing Yen Hsieh
MT7925 is a connac3 device; using the connac2 helper mis-parses TXWI and breaks AMPDU/BA accounting. Use the connac3-specific helper mt7925_tx_check_aggr() instead, Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Reported-by: Nick Morrow <morrownr@gmail.com> Tested-by: Nick Morrow <morrownr@gmail.com> Tested-on: Netgear A9000 USB WiFi adapter Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250818020203.992338-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7925: fix the wrong bss cleanup for SAPMing Yen Hsieh
When in SAP mode, if a STA disconnect, the SAP's BSS should not be cleared. Fixes: 0ebb60da8416 ("wifi: mt76: mt7925: adjust rm BSS flow to prevent next connection failure") Cc: stable@vger.kernel.org Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250728052612.39751-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7925: fix locking in mt7925_change_vif_links()Harshit Mogalapalli
&dev->mt76.mutex lock is taken using mt792x_mutex_acquire(dev) but not released in one of the error paths, add the unlock to fix it. Fixes: 5cd0bd815c8a ("wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202503031055.3ZRqxhAl-lkp@intel.com/ Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://patch.msgid.link/20250727140416.1153406-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7921: don't disconnect when CSA to DFS chanJanusz Dziedzic
When station mode, don't disconnect when we get channel switch from AP to DFS channel. Most APs send CSA request after pass background CAC. In other case we should disconnect after detect beacon miss. Without patch when we get CSA to DFS channel get: "kernel: wlo1: preparing for channel switch failed, disconnecting" Fixes: 8aa2f59260eb ("wifi: mt76: mt7921: introduce CSA support") Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Link: https://patch.msgid.link/20250716165443.28354-1-janusz.dziedzic@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-27wifi: mt76: mt7996: Initialize hdr before passing to skb_put_data()Nathan Chancellor
A new warning in clang [1] points out a couple of places where a hdr variable is not initialized then passed along to skb_put_data(). drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:1894:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer] 1894 | skb_put_data(skb, &hdr, sizeof(hdr)); | ^~~ drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3386:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer] 3386 | skb_put_data(skb, &hdr, sizeof(hdr)); | ^~~ Zero initialize these headers as done in other places in the driver when there is nothing stored in the header. Cc: stable@vger.kernel.org Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1] Closes: https://github.com/ClangBuiltLinux/linux/issues/2104 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20250715-mt7996-fix-uninit-const-pointer-v1-1-b5d8d11d7b78@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-08-26wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info workDuoming Zhou
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which runs as timer handler, sets timer_on to false. This creates critical race conditions: 1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc() is executing, it may observe timer_on as false and skip the call to timer_shutdown_sync(). 2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info worker after the cancel_work_sync() has been executed, resulting in use-after-free bugs. The use-after-free bugs occur in two distinct scenarios, depending on the timing of when the brcmf_btcoex_info struct is freed relative to the execution of its worker thread. Scenario 1: Freed before the worker is scheduled The brcmf_btcoex_info is deallocated before the worker is scheduled. A race condition can occur when schedule_work(&bt_local->work) is called after the target memory has been freed. The sequence of events is detailed below: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | kfree(cfg->btcoex); // FREE | | schedule_work(&bt_local->work); // USE Scenario 2: Freed after the worker is scheduled The brcmf_btcoex_info is freed after the worker has been scheduled but before or during its execution. In this case, statements within the brcmf_btcoex_handler() — such as the container_of macro and subsequent dereferences of the brcmf_btcoex_info object will cause a use-after-free access. The following timeline illustrates this scenario: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | schedule_work(); // Reschedule | kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker /* | btci = container_of(....); // USE The kfree() above could | ... also occur at any point | btci-> // USE during the worker's execution| */ | To resolve the race conditions, drop the conditional check and call timer_shutdown_sync() directly. It can deactivate the timer reliably, regardless of its current state. Once stopped, the timer_on state is then set to false. Fixes: 61730d4dfffc ("brcmfmac: support critical protocol API for DHCP") Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://patch.msgid.link/20250822050839.4413-1-duoming@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-08-26wifi: rt2x00: fix CRC_CCITT dependencyArnd Bergmann
Compile-testing this driver on Arm platforms shows a link failure when the CRC functions are not part of the kernel: x86_64-linux-ld: drivers/net/wireless/ralink/rt2x00/rt2800lib.o: in function `rt2800_check_firmware': rt2800lib.c:(.text+0x20e5): undefined reference to `crc_ccitt' Move the select statement to the correct Kconfig symbol to match the call site. Fixes: 311b05e235cf ("wifi: rt2x00: add COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://patch.msgid.link/20250731075837.1969136-1-arnd@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-08-26wifi: rt2800: select CONFIG_RT2X00_LIB as neededArnd Bergmann
The rt2800 specific code requires the more general library code: ERROR: modpost: "rt2x00queue_get_entry" [drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko] undefined! ERROR: modpost: "rt2x00lib_dmastart" [drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko] undefined! ERROR: modpost: "rt2x00lib_dmadone" [drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko] undefined! ERROR: modpost: "rt2x00lib_rxdone" [drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko] undefined! ERROR: modpost: "rt2x00lib_txdone_nomatch" [drivers/net/wireless/ralink/rt2x00/rt2800lib.ko] undefined! ERROR: modpost: "rt2x00lib_txdone" [drivers/net/wireless/ralink/rt2x00/rt2800lib.ko] undefined! ERROR: modpost: "rt2x00queue_get_entry" [drivers/net/wireless/ralink/rt2x00/rt2800lib.ko] undefined! ERROR: modpost: "rt2x00lib_get_bssidx" [drivers/net/wireless/ralink/rt2x00/rt2800lib.ko] undefined! ERROR: modpost: "rt2x00mac_conf_tx" [drivers/net/wireless/ralink/rt2x00/rt2800lib.ko] undefined! ERROR: modpost: "rt2x00lib_txdone_noinfo" [drivers/net/wireless/ralink/rt2x00/rt2800lib.ko] undefined! Select the symbol to avoid this build failure. Fixes: 7f6109086c9e ("wifi: rt2800: move 2x00soc to 2800soc") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://patch.msgid.link/20250729152924.2462423-1-arnd@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-30Merge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
2025-07-29Merge tag 'driver-core-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres<T> - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper<T> for Opaque<T> - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...
2025-07-24net: Use netif_threaded_enable instead of netif_set_threaded in driversSamiullah Khawaja
Prepare for adding an enum type for NAPI threaded states by adding netif_threaded_enable API. De-export the existing netif_set_threaded API and only use it internally. Update existing drivers to use netif_threaded_enable instead of the de-exported netif_set_threaded. Note that dev_set_threaded used by mt76 debugfs file is unchanged. Signed-off-by: Samiullah Khawaja <skhawaja@google.com> Link: https://patch.msgid.link/20250723013031.2911384-3-skhawaja@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24Merge tag 'wireless-next-2025-07-24' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Another wireless update: - rtw89: - STA+P2P concurrency - support for USB devices RTL8851BU/RTL8852BU - ath9k: OF support - ath12k: - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - iwlwifi: some FIPS interoperability - brcm80211: support SDIO 43751 device - rt2x00: better DT/OF support - cfg80211/mac80211: - improved S1G support - beacon monitor for MLO * tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits) ssb: use new GPIO line value setter callbacks for the second GPIO chip wifi: Fix typos wifi: brcmsmac: Use str_true_false() helper wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure wifi: brcm80211: Remove yet more unused functions wifi: brcm80211: Remove more unused functions wifi: brcm80211: Remove unused functions wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions" wifi: iwlwifi: check validity of the FW API range wifi: iwlwifi: don't export symbols that we shouldn't wifi: iwlwifi: mld: use spec link id and not FW link id wifi: iwlwifi: mld: decode EOF bit for AMPDUs wifi: iwlwifi: Remove support for rx OMI bandwidth reduction wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1 wifi: iwlwifi: remove SC2F firmware support wifi: iwlwifi: mvm: Remove NAN support wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn wifi: iwlwifi: disable certain features for fips_enabled wifi: iwlwifi: mld: support channel survey collection for ACS scans ... ==================== Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24wifi: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250723201741.2908456-1-helgaas@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23mt76: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make mt76 access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-6-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23Merge tag 'iwlwifi-next-2025-07-23' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi feature, notably - disable features in fips - remove RX OMI feature code - A few fixes and cleanups ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcmsmac: Use str_true_false() helperLiu Song
Remove hard-coded strings by using the str_true_false() helper function. Signed-off-by: Liu Song <liu.song13@zte.com.cn> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250723173004776P6QSjcW7NrlpGYLTFM-yP@zte.com.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failureTing-Ying Li
For WPA3-SAE Connection in EXTSAE mode, the userspace daemon is allowed to generate the SAE Auth frames. The driver uses the "mgmt_frame" FW IOVAR to transmit this MGMT frame. Before sending the IOVAR, the Driver is incorrectly treating the channel number read from the FW as a frequency value and again attempts to convert this into a channel number using ieee80211_frequency_to_channel(). This added an invalid channel number as part of the IOVAR request to the FW And some FW which strictly expects a valid channel would return BAD_CHAN error, while failing to transmit the driver requested SAE Auth MGMT frame. Fix this in the CYW vendor specific MGMT TX cfg80211 ops handler, by not treating the channel number read from the FW as frequency value and skip the attempt to convert it again into a channel number. Also fix this in the generic MGMT TX cfg80211 ops handler. Fixes: c2ff8cad6423 ("brcm80211: make mgmt_tx in brcmfmac accept a NULL channel") Fixes: 66f909308a7c ("wifi: brcmfmac: cyw: support external SAE authentication in station mode") Signed-off-by: Ting-Ying Li <tingying.li@cypress.com> Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250723105918.5229-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcm80211: Remove yet more unused functionsDr. David Alan Gilbert
This is a subset of unused functions in bcrmsmac phy_cmn.c, They're unused since the original 2010 commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250626140812.56700-4-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcm80211: Remove more unused functionsDr. David Alan Gilbert
This is a subset of unused functions in bcrmsmac phy_cmn.c, They're unused since the original 2010 commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250626140812.56700-3-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcm80211: Remove unused functionsDr. David Alan Gilbert
This is a subset of unused functions in bcrmsmac phy_cmn.c, They're unused since the original 2010 commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.") Remove them. Then remove two more functions in phy_n.c that were only used by the ones just removed. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250626140812.56700-2-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-18 09:17:27 +0000