| Age | Commit message (Collapse) | Author |
|---|
|
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In commit # 0a3e4e94d137 ("platform/x86/intel/ifs: Add SBAF test image
loading support"), the documentation for "Structural Based Functional
Test at Field (SBAF)" had an incomplete underline. This resulted in the
following build warning:
Documentation/arch/x86/ifs:2: drivers/platform/x86/intel/ifs/ifs.h:131: WARNING: Title underline too short.
Fix it by extending the dotted lines to match the length of the title.
Fixes: 0a3e4e94d137 ("platform/x86/intel/ifs: Add SBAF test image loading support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20240820134354.2aec355d@canb.auug.org.au/T/#u
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20240823184337.2923179-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In a core, the SBAF test engine is shared between sibling CPUs.
An SBAF test image contains multiple bundles. Each bundle is further
composed of subunits called programs. When a SBAF test (for a particular
core) is triggered by the user, each SBAF bundle from the loaded test
image is executed sequentially on all the threads on the core using
the stop_core_cpuslocked mechanism. Each bundle execution is initiated by
writing to MSR_ACTIVATE_SBAF.
SBAF test bundle execution may be aborted when an interrupt occurs or
if the CPU does not have enough power budget for the test. In these
cases the kernel restarts the test from the aborted bundle. SBAF
execution is not retried if the test fails or if the test makes no
forward progress after 5 retries.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-4-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Structural Based Functional Test at Field (SBAF) is a new type of
testing that provides comprehensive core test coverage complementing
existing IFS tests like Scan at Field (SAF) or ArrayBist.
SBAF device will appear as a new device instance (intel_ifs_2) under
/sys/devices/virtual/misc. The user interaction necessary to load the
test image and test a particular core is the same as the existing scan
test (intel_ifs_0).
During the loading stage, the driver will look for a file named
ff-mm-ss-<batch02x>.sbft in the /lib/firmware/intel/ifs_2 directory.
The hardware interaction needed for loading the image is similar to
SAF, with the only difference being the MSR addresses used. Reuse the
SAF image loading code, passing the SBAF-specific MSR addresses via
struct ifs_test_msrs in the driver device data.
Unlike SAF, the SBAF test image chunks are further divided into smaller
logical entities called bundles. Since the SBAF test is initiated per
bundle, cache the maximum number of bundles in the current image, which
is used for iterating through bundles during SBAF test execution.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-3-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
IFS tests such as Scan at Field (SAF) or Structural Based Functional
Test at Field (SBAF), require the user to load a test image. The image
loading process is similar across these tests, with the only difference
being MSR addresses used. To reuse the code between these tests, remove
the hard coding of MSR addresses and allow the driver to pass the MSR
addresses per IFS test (via driver device data).
Add a new structure named "struct ifs_test_msrs" to specify the
test-specific MSR addresses. Each IFS test will provide this structure,
enabling them to reuse the common code.
This is a preliminary patch in preparation for the addition of SBAF
support.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240801051814.1935149-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Array BIST MSR addresses, bit definition and semantics are different for
Sierra Forest. Branch into a separate Array BIST flow on Sierra Forest
when user invokes Array Test.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-10-jithu.joseph@intel.com
[ij: ARRAY_GEN_* -> ARRAY_GEN* for consistency]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Width of chunk related bitfields is ACTIVATE_SCAN and SCAN_STATUS MSRs
are different in newer IFS generation compared to gen0.
Make changes to scan test flow such that MSRs are populated
appropriately based on the generation supported by hardware.
Account for the 8/16 bit MSR bitfield width differences between gen0 and
newer generations for the scan test trace event too.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-5-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Scan image loading flow for newer IFS generations are slightly different
from that of current generation. In newer schemes, loading need not be
done once for each socket as was done in gen0.
Also the width of NUM_CHUNKS bitfield in SCAN_HASHES_STATUS MSR has
increased from 8 -> 16 bits. Similarly there are width differences for
CHUNK_AUTHENTICATION_STATUS too.
Further the parameter to AUTHENTICATE_AND_COPY_CHUNK is passed
differently in newer generations.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-4-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
IFS generation number is reported via MSR_INTEGRITY_CAPS. As IFS
support gets added to newer CPUs, some differences are expected during
IFS image loading and test flows.
Define MSR bitmasks to extract and store the generation in driver data,
so that driver can modify its MSR interaction appropriately.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-2-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Array BIST is the second test supported by IFS. Modify IFS doc
entry to be more general.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-9-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Array BIST test (for a particular core) is triggered by writing
to MSR_ARRAY_BIST from one sibling of the core.
This will initiate a test for all supported arrays on that
CPU. Array BIST test may be aborted before completing all the
arrays in the event of an interrupt or other reasons.
In this case, kernel will restart the test from that point
onwards. Array test will also be aborted when the test fails,
in which case the test is stopped immediately without further
retry.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-8-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The interface to trigger Array BIST test and obtain its result
is similar to the existing scan test. The only notable
difference is that, Array BIST doesn't require any test content
to be loaded. So binary load related options are not needed for
this test.
Add sysfs interface for array BIST test, the testing support will
be added by subsequent patch.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-7-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Array BIST is a new type of core test introduced under the Intel Infield
Scan (IFS) suite of tests.
Emerald Rapids (EMR) is the first CPU to support Array BIST.
Array BIST performs tests on some portions of the core logic such as
caches and register files. These are different portions of the silicon
compared to the parts tested by the first test type
i.e Scan at Field (SAF).
Make changes in the device driver init flow to register this new test
type with the device driver framework. Each test will have its own
sysfs directory (intel_ifs_0 , intel_ifs_1) under misc hierarchy to
accommodate for the differences in test type and how they are initiated.
Upcoming patches will add actual support.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-6-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Cleanup incorporating misc review comments
- Remove the subdirectory intel_ifs/0 for devicenode [1]
- Make plat_ifs_groups non static and use it directly without using a
function [2]
Link: https://lore.kernel.org/lkml/Y+4kQOtrHt5pdsSO@kroah.com/ [1]
Link: https://lore.kernel.org/lkml/Y9nyxNesVHCUXAcH@kroah.com/ [2]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322003359.213046-4-jithu.joseph@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The struct holding device driver data contained both read only(ro)
and read write(rw) fields.
Separating ro fields from rw fields was recommended as
a preferable design pattern during review[1].
Group ro fields into a separate const struct. Associate it to
the miscdevice being registered by keeping its pointer in the
same container struct as the miscdevice.
Link: https://lore.kernel.org/lkml/Y+9H9otxLYPqMkUh@kroah.com/ [1]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-3-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In preparation to supporting additional tests, remove ifs_pkg_auth
from per-test scope, as it is only applicable for one test type.
This will simplify ifs_init() flow when multiple tests are added.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-2-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Document the test_num member of struct ifs_data.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/lkml/774fd22a-aaee-758d-8195-77bac783ecbc@infradead.org/
|
|
Initial implementation assumed a single IFS test image file with a
fixed name ff-mm-ss.scan. (where ff, mm, ss refers to family, model and
stepping of the core).
Subsequently, it became evident that supporting more than one test
image file is needed to provide more comprehensive test coverage. (Test
coverage in this scenario refers to testing more transistors in the core
to identify faults).
The other alternative of increasing the size of a single scan test image
file would not work as the upper bound is limited by the size of memory
area reserved by BIOS for loading IFS test image.
Introduce "current_batch" file which accepts a number. Writing a
number to the current_batch file would load the test image file by
name ff-mm-ss-<xy>.scan, where <xy> is the number written to the
"current_batch" file in hex. Range check of the input is done to verify
it not greater than 0xff.
For e.g if the scan test image comprises of 6 files, they would be named:
06-8f-06-01.scan
06-8f-06-02.scan
06-8f-06-03.scan
06-8f-06-04.scan
06-8f-06-05.scan
06-8f-06-06.scan
And writing 3 to current_batch would result in loading 06-8f-06-03.scan
above. The file can also be read to know the currently loaded file.
And testing a system looks like:
for each scan file
do
load the IFS test image file (write to the batch file)
for each core
do
test the core with this set of tests
done
done
Qualify few error messages with the test image file suffix to provide
better context.
[ bp: Massage commit message. Add link to the discussion. ]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221107225323.2733518-13-jithu.joseph@intel.com
|
|
The data portion of a IFS test image file contains a metadata region
containing possibly multiple metadata structures in addition to test
data and hashes.
IFS Metadata layout
+----------------------+ 0
|META_TYPE_IFS (=1) |
+----------------------+
|meta_size |
+----------------------+
|test type |
+----------------------+
|fusa info |
+----------------------+
|total images |
+----------------------+
|current image# |
+----------------------+
|total chunks |
+----------------------+
|starting chunk |
+----------------------+
|size per chunk |
+----------------------+
|chunks per stride |
+----------------------+
|Reserved[54] |
+----------------------+ 256
| |
| Test Data/Chunks |
| |
+----------------------+ meta_size
| META_TYPE_END (=0) |
+----------------------+ meta_size + 4
| size of end (=8) |
+----------------------+ meta_size + 8
Introduce the layout of this meta_data structure and validate
the sanity of certain fields of the new image before loading.
Tweak references to IFS test image chunks to reflect the updated
layout of the test image.
[ bp: Massage commit message. ]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117230408.30331-1-jithu.joseph@intel.com
|
|
IFS requires tests to be authenticated once for each CPU socket on a
system.
scan_chunks_sanity_check() was dynamically allocating memory to store
the state of whether tests have been authenticated on each socket for
every load operation.
Move the memory allocation to init path and store the pointer in
ifs_data struct.
Also rearrange the adjacent error checking in init for a more simplified
and natural flow.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117195957.28225-1-jithu.joseph@intel.com
|
|
IFS test image is unnecessarily loaded during driver initialization.
Drop image loading during ifs_init() and improve module load time. With
this change, user has to load one when starting the tests.
As a consequence, make ifs_sem static as it is only used within sysfs.c
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117035935.4136738-4-jithu.joseph@intel.com
|
|
Add documentation for In-Field Scan (IFS). This documentation
describes the basics of IFS, the loading IFS image, chunk
authentication, running scan and how to check result via sysfs.
The CORE_CAPABILITIES MSR enumerates whether IFS is supported.
The full github location for distributing the IFS images is
still being decided. So just a placeholder included for now
in the documentation.
Future CPUs will support more than one type of test. Plan for
that now by using a "_0" suffix on the ABI directory names.
Additional test types will use "_1", etc.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-13-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Implement sysfs interface to trigger ifs test for a specific cpu.
Additional interfaces related to checking the status of the
scan test and seeing the version of the loaded IFS binary
are also added.
The basic usage is as below.
- To start test, for example on cpu5:
echo 5 > /sys/devices/platform/intel_ifs/run_test
- To see the status of the last test
cat /sys/devices/platform/intel_ifs/status
- To see the version of the loaded scan binary
cat /sys/devices/platform/intel_ifs/image_version
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-10-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In a core, the scan engine is shared between sibling cpus.
When a Scan test (for a particular core) is triggered by the user,
the scan chunks are executed on all the threads on the core using
stop_core_cpuslocked.
Scan may be aborted by some reasons. Scan test will be aborted in certain
circumstances such as when interrupt occurred or cpu does not have enough
power budget for scan. In this case, the kernel restart scan from the chunk
where it stopped. Scan will also be aborted when the test is failed. In
this case, the test is immediately stopped without retry.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-9-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The IFS image contains hashes that will be used to authenticate the ifs
test chunks. First, use WRMSR to copy the hashes and enumerate the number
of test chunks, chunk size and the maximum number of cores that can run
scan test simultaneously.
Next, use WRMSR to authenticate each and every scan test chunk which is
stored in the IFS image. The CPU will check if the test chunks match
the hashes, otherwise failure is indicated to system software. If the test
chunk is authenticated, it is automatically copied to secured memory.
Use schedule_work_on() to perform the hash copy and authentication. Note
this needs only be done on the first logical cpu of each socket.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-8-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Driver probe routine allocates structure to communicate status
and parameters between functions in the driver. Also call
load_ifs_binary() to load the scan image file.
There is a separate scan image file for each processor family,
model, stepping combination. This is read from the static path:
/lib/firmware/intel/ifs/{ff-mm-ss}.scan
Step 1 in loading is to generate the correct path and use
request_firmware_direct() to load into memory.
Subsequent patches will use the IFS MSR interfaces to copy
the image to BIOS reserved memory and validate the SHA256
checksums.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-6-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
