| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
The variable was renamed to fbcon_registered_fb, but this comment was
not updated along with the change. Correct it to avoid confusion.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Fixes: efc3acbc105a ("fbcon: Maintain a private array of fb_info")
[sima: Add Fixes: line.]
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250709103438.572309-1-oushixiong1025@163.com
|
|
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DRM drivers such as efidrm and vesadrm can export firmware EDID
data to userspace. Make the related option CONFIG_FIRMWARE_EDID
available without CONFIG_FB. Make it depend on X86, which is
currently the only architecture providing EDID information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20250602075537.137759-2-tzimmermann@suse.de
|
|
Fix the compile-time warning
drivers/video/fbdev/via/via-gpio.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-15-tzimmermann@suse.de
|
|
Fix the compile-time warnings
drivers/video/fbdev/via/via-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/via/via_i2c.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-14-tzimmermann@suse.de
|
|
Fix the compile-time warning
drivers/video/fbdev/sis/sis_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbols are not used outside of their module. Some of
the symbols are not used anywhere, so remove the functions entirely.
Also remove the related, but unused, define SISFB_HAVE_MALLOC_NEW.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-13-tzimmermann@suse.de
|
|
Fix the compile-time warning
drivers/video/fbdev/pxafb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbol is not used anywhere, so remove the function
entirely.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-12-tzimmermann@suse.de
|
|
Fix the compile-time warning
drivers/video/fbdev/mb862xx/mb862xx-i2c.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-11-tzimmermann@suse.de
|
|
Fix the compile-time warnings
drivers/video/fbdev/omap2/omapfb/dss/dpi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/sdi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-10-tzimmermann@suse.de
|
|
Fix the compile-time warnings
drivers/video/fbdev/omap2/omapfb/dss/apply.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/display.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss-of.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/output.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/overlay.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/venc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/vrfb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-9-tzimmermann@suse.de
|
|
Fix the compile-time warnings
drivers/video/fbdev/omap/lcd_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/lcdc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/omapfb_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-8-tzimmermann@suse.de
|
|
Fix the compile-time warnings
drivers/video/fbdev/matrox/g450_pll.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_DAC1064.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_Ti3026.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_accel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_base.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_g450.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_misc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-7-tzimmermann@suse.de
|
|
Fix coding style.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20250612081738.197826-6-tzimmermann@suse.de
|
|
Fix the compile-time warning
drivers/video/fbdev/cyber2000fb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbols are not used anywhere, so remove the functions
entirely.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-5-tzimmermann@suse.de
|
|
Fix the compile-time warnings
drivers/video/fbdev/c2p_iplan2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/c2p_planar.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-4-tzimmermann@suse.de
|
|
Fix the compile-time warnings
drivers/video/fbdev/core/cfbcopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_ddc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_defio.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_io_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_sys_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcmap.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbmon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/modedb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/svgalib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/syscopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/macmodes.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sbuslib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/wmt_ge_rops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-3-tzimmermann@suse.de
|
|
Fix coding style.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20250612081738.197826-2-tzimmermann@suse.de
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Framebuffer Subsystem (fbdev):
- The display's blanking status is now tracked in 'struct fb_info'
- 'framebuffer_alloc()' initializes the blank state to FB_BLANK_UNBLANK
- 'register_framebuffer()' sets the state to 'FB_BLANK_POWERDOWN' if
an 'fb_blank' callback exists, ensuring 'FB_EVENT_BLANK' listeners
correctly see the display being turned on during the first modeset
- The 'FB_EVENT_BLANK' event data now includes both the new and the
old blank states
- 'fb_blank()' has been reworked to return early on errors, without
functional changes, in preparation for further state tracking
improvements
- Fbdev now calls dedicated functions in the backlight subsystems to
notify them of blank state changes, instead of relying on fbdev
event notifiers
- For LCDs, fbdev also calls a dedicated function to notify of mode
changes
- Removed the definitions for the unused fbdev event constants
'FB_EVENT_MODE_CHANGE' and 'FB_EVENT_BLANK' from the header file
Backlight Subsystem:
- Implemented fbdev blank state tracking using the (newly enhanced)
blank state information provided directly by 'FB_EVENT_BLANK'
- Removed internal blank state tracking fields ('fb_bl_on') from
'struct backlight_device'
- Moved the handling of blank-state updates into a separate internal
helper function, 'backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call interface ('backlight_notify_blank()' and
'backlight_notify_blank_all()') for display drivers to update
backlight status
LCD Subsystem:
- Moved the handling of display updates (blank events and mode
changes) from fbdev event notifiers to separate internal helper
functions ('lcd_notify_blank',
'lcd_notify_mode_change')
- Removed support for fbdev events and replaced it with dedicated
function call interfaces ('lcd_notify_blank_all()',
'lcd_notify_mode_change_all()')
- The LCD subsystem now maintains its own internal list of LCD
devices instead of relying on fbdev notifiers
LED Backlight Trigger:
- Moved the handling of blank-state updates into a separate internal
helper, 'ledtrig_backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call, 'ledtrig_backlight_blank()', for fbdev to notify
trigger of blank state changes
- The LED backlight trigger now maintains its own internal list of
triggers instead of relying on fbdev notifiers
Qualcomm WLED Backlight:
- Added a NULL check after 'devm_kasprintf()' in 'wled_configure()'
to prevent a potential NULL pointer dereference if memory
allocation fails"
* tag 'backlight-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pm8941: Add NULL check in wled_configure()
fbdev: Remove constants of unused events
leds: backlight trigger: Replace fb events with a dedicated function call
leds: backlight trigger: Move blank-state handling into helper
backlight: lcd: Replace fb events with a dedicated function call
backlight: lcd: Move event handling into helpers
backlight: Replace fb events with a dedicated function call
backlight: Move blank-state handling into helper
backlight: Implement fbdev tracking with blank state from event
fbdev: Send old blank state in FB_EVENT_BLANK
fbdev: Track display blanking state
fbdev: Rework fb_blank()
|
|
If fb_add_videomode() in fb_set_var() fails to allocate memory for
fb_videomode, later it may lead to a null-ptr dereference in
fb_videomode_to_var(), as the fb_info is registered while not having the
mode in modelist that is expected to be there, i.e. the one that is
described in fb_info->var.
================================================================
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901
Call Trace:
display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929
fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071
resize_screen drivers/tty/vt/vt.c:1176 [inline]
vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263
fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720
fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776
do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128
fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
================================================================
The reason is that fb_info->var is being modified in fb_set_var(), and
then fb_videomode_to_var() is called. If it fails to add the mode to
fb_info->modelist, fb_set_var() returns error, but does not restore the
old value of fb_info->var. Restore fb_info->var on failure the same way
it is done earlier in the function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
fb_videomode_to_var
If fb_add_videomode() in do_register_framebuffer() fails to allocate
memory for fb_videomode, it will later lead to a null-ptr dereference in
fb_videomode_to_var(), as the fb_info is registered while not having the
mode in modelist that is expected to be there, i.e. the one that is
described in fb_info->var.
================================================================
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901
Call Trace:
display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929
fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071
resize_screen drivers/tty/vt/vt.c:1176 [inline]
vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263
fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720
fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776
do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128
fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
================================================================
Even though fbcon_init() checks beforehand if fb_match_mode() in
var_to_display() fails, it can not prevent the panic because fbcon_init()
does not return error code. Considering this and the comment in the code
about fb_match_mode() returning NULL - "This should not happen" - it is
better to prevent registering the fb_info if its mode was not set
successfully. Also move fb_add_videomode() closer to the beginning of
do_register_framebuffer() to avoid having to do the cleanup on fail.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 96fe6a2109db ("[PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
It looks like attempting to write to the "store_modes" sysfs node will
run afoul of unregistered consoles:
UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28
index -1 is out of range for type 'fb_info *[32]'
...
fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122
fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048
fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673
store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113
dev_attr_store+0x55/0x80 drivers/base/core.c:2439
static struct fb_info *fbcon_registered_fb[FB_MAX];
...
static signed char con2fb_map[MAX_NR_CONSOLES];
...
static struct fb_info *fbcon_info_from_console(int console)
...
return fbcon_registered_fb[con2fb_map[console]];
If con2fb_map contains a -1 things go wrong here. Instead, return NULL,
as callers of fbcon_info_from_console() are trying to compare against
existing "info" pointers, so error handling should kick in correctly.
Reported-by: syzbot+a7d4444e7b6e743572f7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/679d0a8f.050a0220.163cdc.000c.GAE@google.com/
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct dac_info *" but the returned type will be
"struct ics5342_info *", which has a larger allocation size. This is
by design, as struct ics5342_info contains struct dac_info as its first
member.
(patch slightly modified by Helge Deller)
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The actual length of const string "noaccel" is 7, but the strncmp()
branch in nvidiafb_setup() wrongly hard codes it as 6.
Fix by using actual length 7 as argument of the strncmp().
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There is a spelling mistake in macro CARMINE_TOTAL_DIPLAY_MEM. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove support for fb events from the led backlight trigger. Provide
the helper ledtrig_backlight_blank() instead. Call it from fbdev to
inform the trigger of changes to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of the fbdev
notifiers, maintain an internal list of led backlight triggers.
v3:
- export ledtrig_backlight_blank()
v2:
- maintain global list of led backlight triggers (Lee)
- avoid IS_REACHABLE() in source file (Lee)
- notify on changes to blank state instead of display state
- use lock guards
- initialize led list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from the lcd subsystem. Provide the
helper lcd_notify_blank_all() instead. In fbdev, call
lcd_notify_blank_all() to inform the lcd subsystem of changes
to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of fbdev
notifiers, maintain an internal list of lcd devices.
v3:
- export lcd_notify_mode_change_all() (kernel test robot)
v2:
- maintain global list of lcd devices
- avoid IS_REACHABLE() in source file
- use lock guards
- initialize lcd list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-9-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from backlight subsystem. Provide the
helper backlight_notify_blank_all() instead. Also export the existing
helper backlight_notify_blank() to update a single backlight device.
In fbdev, call either helper to inform the backlight subsystem of
changes to a display's blank state. If the framebuffer device has a
specific backlight, only update this one; otherwise update all.
v4:
- protect blacklight declarations with IS_REACHABLE() (kernel test robot)
v3:
- declare empty fb_bl_notify_blank() as static inline (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The event FB_EVENT_BLANK sends the new blank state in the event's
data field. Also send the old state. It's an additional field in the
data array; existing receivers won't notice the difference.
The backlight subsystem currently tracks blank state per display per
backlight. That is not optimal as it ties backlight code to fbdev. A
subsystem should not track internal state of another subsystem. With
both, new and old, blank state in FB_EVENT_BLANK, the backlight code
will not require its own state tracker any longer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-4-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Store the display's blank status in struct fb_info.blank and track
it in fb_blank(). As an extra, the status is now available from the
sysfs blank attribute.
Support for blanking is optional. Therefore framebuffer_alloc()
initializes the state to FB_BLANK_UNBLANK (i.e., the display is
on). If the fb_blank callback has been set, register_framebuffer()
sets the state to FB_BLANK_POWERDOWN. On the first modeset, the
call to fb_blank() will update it to _UNBLANK. This is important,
as listeners to FB_EVENT_BLANK will now see the display being
switched on.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Reimplement fb_blank() to return early on errors. No functional
changes. Prepares the helper for tracking the blanking state in
struct fb_info.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
Call device_remove_file() when driver remove.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Using device_create_with_groups() to simplify creation and removal.
Same as commit 1083a7be4504 ("tty: Use static attribute groups for
sysfs entries").
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Added checks for xoffset, yoffset settings.
Incorrect settings of these parameters can lead to errors
in sm501fb_pan_ functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 5fc404e47bdf ("[PATCH] fb: SM501 framebuffer driver")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Value of enum parameter 'plane' is initialized in dss_init_overlays and
cannot take the value OMAP_DSS_WB. Function dispc_ovl_setup_common could
be called with this value of parameter only from dispc_wb_setup, which has
never been used and has been removed in commit 4f55bb03801a
("omapfb: Remove unused writeback code"). The code in the if-branch is
unreachable.
Remove unreachable branch.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The original version duplicated more or less the same algorithms for
both system and i/o memory.
In this version the drawing algorithms (copy/fill/blit) are separate
from the memory access (system and i/o). The two parts are getting
combined in the loadable module sources. This also makes it more robust
against wrong memory access type or alignment mistakes as there's no
direct pointer access or arithmetic in the algorithm sources anymore.
Due to liberal use of inlining the compiled result is a single function
in all 6 cases, without unnecessary function calls. Unlike earlier the
use of macros could be minimized as apparently both gcc and clang is
capable now to do the same with inline functions just as well.
What wasn't quite the same in the two variants is the support for pixel
order reversing. This version is capable to do that for both system and
I/O memory, and not only for the latter. As demand for low bits per
pixel modes isn't high there's a configuration option to enable this
separately for the CFB and SYS modules.
The pixel reversing algorithm is different than earlier and was designed
so that it can take advantage of bit order reversing instructions on
architectures which have them. And even for higher bits per pixel modes
like four bpp.
One of the shortcomings of the earlier version was the incomplete
support for foreign endian framebuffers. Now all three drawing
algorithms produce correct output on both endians with native and
foreign framebuffers. This is one of the important differences even if
otherwise the algorithms don't look too different than before.
All three routines work now with aligned native word accesses. As a
consequence blitting isn't limited to 32 bits on 64 bit architectures as
it was before.
The old routines silently assumed that rows are a multiple of the word
size. Due to how the new routines function this isn't a requirement any
more and access will be done aligned regardless. However if the
framebuffer is configured like that then some of the fast paths won't be
available.
As this code is supposed to be running on all supported architectures it
wasn't optimized for a particular one. That doesn't mean I haven't
looked at the disassembly. That's where I noticed that it isn't a good
idea to use the fallback bitreversing code for example.
The low bits per pixel modes should be faster than before as the new
routines can blit 4 pixels at a time.
On the higher bits per pixel modes I retained the specialized aligned
routines so it should be more or less the same, except on 64 bit
architectures. There the blitting word size is double now which means 32
BPP isn't done a single pixel a time now.
The code was tested on x86, amd64, mips32 and mips64. The latter two in
big endian configuration. Originally thought I can get away with the
first two, but with such bit twisting code byte ordering is tricky and
not really possible to get right without actually verifying it.
While writing such routines isn't rocket science a lot of time was spent
on making sure that pixel ordering, foreign byte order, various bits per
pixels, cpu endianness and word size will give the expected result in
all sorts of combinations without making it overly complicated or full
with special cases.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove dependency on fb_draw.h to allow fbcon packed pixel drawing refactoring.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove dependency on fb_draw.h to allow fbcon packed pixel drawing refactoring.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use device_add_group() to simplify creation.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
[WHY]
1. The driver forgot to call device_remove_file()
in sh_mobile_lcdc_overlay_fb_unregister(), and there was
no error handling when calling device_create_file() failed.
2. This should probably use device_add_group() instead of
individual files to simplify both creation and removal. [Arnd]
3. The driver core can register and cleanup sysfs groups already.
as commit 95cdd538e0e5 ("fbdev: efifb: Register sysfs groups
through driver core").
[HOW]
Register sysfs groups through driver core.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The address of a data structure member was determined before
a corresponding null pointer check in the implementation of
the function “au1100fb_setmode”.
This issue was detected by using the Coccinelle software.
Fixes: 3b495f2bb749 ("Au1100 FB driver uplift for 2.6.")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
