| Age | Commit message (Collapse) | Author |
|---|
|
Add test to validate the headroom adjustment support for both extension
and the shrinking cases. For the extension part, eat up space from
the start of payload data whereas, for the shrinking part, populate
the newly available space with a tag. In the user-space, validate that a
test string is manipulated accordingly.
The negative and positive offset values result in shrinking and growing of
headroom (growing and shrinking of payload) respectively.
TAP version 13
1..9
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: pkt_sz 512, ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Failed run: pkt_sz 512, ... offset -128. Reason: Adjustment failed
ok 8 xdp.test_xdp_native_adjst_head_grow_data
\# Failed run: pkt_sz (512) > HDS threshold (0) and offset 64 > 48
ok 9 xdp.test_xdp_native_adjst_head_shrnk_data
\# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate support for the two cases of tail adjustment: 1)
tail extension, and 2) tail shrinking across different frame sizes and
offset values. For each of the two cases, test both the single and
multi-buffer cases by choosing appropriate packet size.
The negative offset value result in growing of tailroom (shrinking of
payload) while the positive offset result in shrinking of tailroom
(growing of payload).
Since the support for tail adjustment varies across drivers, classify the
test as pass if at least one combination of packet size and offset from a
pre-selected list results in a successful run. In case of an unsuccessful
run, report the failure and highlight the packet size and offset values
that caused the test to fail, as well as the values that resulted in the
last successful run.
Note: The growing part of this test for netdevsim may appear flaky when
the offset value is larger than 1. This behavior occurs because tailroom
is not explicitly reserved for netdevsim, with 1 being the typical
tailroom value. However, in certain cases, such as payload being the last
in the page with additional available space, the truesize is expanded.
This also result increases the tailroom causing the test to pass
intermittently. In contrast, when tailrrom is explicitly reserved, such
as in the of fbnic, the test results are deterministic.
./drivers/net/xdp.py
TAP version 13
1..7
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: ... successful run: ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to verify the XDP_TX functionality by generating traffic from a
remote node on a specific UDP port and redirecting it back to the sender.
./drivers/net/xdp.py
TAP version 13
1..5
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test XDP_PASS/DROP in single buffer and multi buffer mode when
XDP native support is available.
./drivers/net/xdp.py
TAP version 13
1..4
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
\# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test_kexec_jump program builds correctly when invoked from the top-level
selftests/Makefile, which explicitly sets the OUTPUT variable. However,
building directly in tools/testing/selftests/kexec fails with:
make: *** No rule to make target '/test_kexec_jump', needed by 'test_kexec_jump.sh'. Stop.
This failure occurs because the Makefile rule relies on $(OUTPUT), which is
undefined in direct builds.
Fix this by listing test_kexec_jump in TEST_GEN_PROGS, the standard way to
declare generated test binaries in the kselftest framework. This ensures the
binary is built regardless of invocation context and properly removed by
make clean.
Link: https://lore.kernel.org/r/20250702171704.22559-2-moonhee.lee.ca@gmail.com
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There is a spelling mistake in a ksft_exit_fail_msg() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250715130627.1907017-1-colin.i.king@gmail.com
|
|
The kernel does not provide sys_futex() on 32-bit architectures that do not
support 32-bit time representations, such as riscv32.
As a result, glibc cannot define SYS_futex, causing compilation failures in
tests that rely on this syscall. Define SYS_futex as SYS_futex_time64 in
such cases to ensure successful compilation and compatibility.
Signed-off-by: Cynthia Huang <cynthia@andestech.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/all/20250710103630.3156130-1-ben717@andestech.com
|
|
The ABI for disabling streaming mode via ptrace is to do a write via the
SVE register set. Following the recent round of fixes to the ptrace code
we don't support this operation on systems without SVE, which is detected
as failures by fp-ptrace. Update the program so that it knows that this
operation is not currently supported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sme-only-v1-3-3b96dd19a503@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
fp-ptrace does not handle SME only systems correctly when generating data,
on SME only systems scenarios where we are not in streaming mode will not
have an expected vector length. This leads to attempts to do memcpy()s of
zero byte arrays which can crash, fix this by skipping generation of SVE
data for cases where we do not expect to have an active vector length.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sme-only-v1-2-3b96dd19a503@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When checking that the vector extensions are supported fp-ptrace
currently only checks for SVE being supported which means that we get
into a confused half configured state for SME only systems. Check for
SME as well.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sme-only-v1-1-3b96dd19a503@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The NT_ARM_SVE register set supports two data formats, the native SVE one
and an alternative format where we embed a copy of user_fpsimd_data as used
for NT_PRFPREG in the SVE register set. The register data is set as for a
write to NT_PRFPREG and changes in vector length and streaming mode are
handled as for any NT_ARM_SVE write. This has not previously been tested by
fp-ptrace, add coverage of it.
We do not support writes in FPSIMD format for NT_ARM_SSVE so we skip the
test for anything that would leave us in streaming mode.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sve-fpsimd-v1-1-7ecda32aa297@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently the sve-ptrace test program only runs if the system supports
SVE but since SME includes streaming SVE the tests it offers are valid
even on a system that only supports SME. Since the tests already have
individual hwcap checks just remove the top level test and rely on those.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250718-arm64-sve-ptrace-sme-only-v1-1-2a1121e51b1d@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add test cases for creating and deleting contexts.
TAP version 13
1..12
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm # SKIP no input-xfrm supported
ok 10 rss_api.test_rxfh_fields_ntf
ok 11 rss_api.test_rss_ctx_add
ok 12 rss_api.test_rss_ctx_ntf
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
Link: https://patch.msgid.link/20250717234343.2328602-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
Fixes: 94d66ba1d8e4 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-2-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases to tc_flower.sh to validate generic matching on ERSPAN
options. Both ERSPAN Type II and Type III are covered.
Also add check_tc_erspan_support() to verify whether tc supports
erspan_opts.
Signed-off-by: Li Shuang <shuali@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/1f354a1afd60f29bbbf02bd60cb52ecfc0b6bd17.1752848172.git.shuali@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As ktest.pl can run in various different directories, to make sure the
test is running in the proper directory with the proper source and proper
destination directory, display the content of BUILD_DIR and OUTPUT_DIR at
the start of every test.
This can be helpful for the test runner to stop the test if a test is
running in the wrong location instead of finding out after the test has
completed.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.898022631@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If a default variable contains itself, do not recurse on it.
For example:
ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
# ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Allow -DBUILD_TYPE=boot work the same as -D BUILD_TYPE=boot just like
normal single character option does in most applications.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.567246162@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently -D only updates the persistent options that are defined with
"=". Allow it to also override all temp variables that are defined with
":=".
ktest.pl -D 'USE_TEMP_DIR:=1' -D 'TEST_TYPE[2]=build' config
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.399653933@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add -D option that lets the user override options in the config.
For instance, if the config has: BUILD_NOCLEAN=1 which prevents mrproper
from being called before builds, and the user wants to call it once. The
user can run:
ktest -D BUILD_NOCLEAN=0 config
And the default "BUILD_NOCLEAN" options will be disabled.
If the user wants to change the second test to do a build and not boot,
the user can run:
ktest -D 'TEST_TYPE[2]=build' config
Where the '[#]' is for the test to assign the variable for. In the above
example, it will happen on test 2.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.231478909@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A single fix for the futex selftest code to make 32-bit user space
work correctly on 64-bit kernels.
sys_futex_wait() expects a struct __kernel_timespec for the timeout,
but the selftest uses struct timespec, which is the original 32-bit
non 2038 compliant variant.
Fix it up by converting the callsite supplied timespec to a
__kernel_timespec and hand that into the syscall"
* tag 'locking-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Convert 32-bit timespec to 64-bit version for 32-bit compatibility mode
|
|
PID_FMT does not have an offset field, so folio_split() tests are not
performed. Add PID_FMT_OFFSET with an offset field and use it to perform
folio_split() tests.
Link: https://lkml.kernel.org/r/20250709012800.3225727-1-ziy@nvidia.com
Fixes: 80a5c494c89f ("selftests/mm: add tests for folio_split(), buddy allocator like split")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by : Donet Tom <donettom@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
perror() automatically appends a newline character, so the explicit '\n'
in the format strings is redundant and results in duplicate newlines in
the output.
Remove the redundant '\n' characters from perror() calls in
workload_hint_test.c to fix the formatting.
Link: https://lkml.kernel.org/r/F482FB1EC020000C+20250710134751.306096-1-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Cc: Guan Wentao <guanwentao@uniontech.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove redundant sprintf() call that was duplicating the same operation of
formatting delay_str with argv[1].
Link: https://lkml.kernel.org/r/6338CD0E839B770B+20250710130412.284531-1-wangyuli@uniontech.com
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Cc: Guan Wentao <guanwentao@uniontech.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test cases to test the correctness of PFN ZERO flag of pagemap_scan
ioctl. Test with normal pages backed memory and huge pages backed memory.
Link: https://lkml.kernel.org/r/20250707073321.106431-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix handling of migration disabled tasks in default idle selection
- update_locked_rq() called __this_cpu_write() spuriously with NULL
when @rq was not locked. As the writes were spurious, it didn't break
anything directly. However, the function could be called in a
preemptible leading to a context warning in __this_cpu_write(). Skip
the spurious NULL writes.
- Selftest fix on UP
* tag 'sched_ext-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Handle migration-disabled tasks in idle selection
sched/ext: Prevent update_locked_rq() calls with NULL rq
selftests/sched_ext: Fix exit selftest hang on UP
|
|
Virtual devices (e.g., VXLAN) that do not have a notion of a carrier are
created with an "UNKNOWN" operational state which some users find
confusing [1].
It is possible to set the operational state from user space either
during device creation or afterwards and some applications will start
doing that in order to avoid the above problem.
Add a test for this functionality to ensure it does not regress.
[1] https://lore.kernel.org/netdev/20241119153703.71f97b76@hermes.local/
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717125151.466882-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This tests the flow to tombstone vdevice when idevice is to be unbound
before vdevice destruction. The expected results of the tombstone are:
- The vdevice ID can't be reused anymore (not tested in this patch).
- Even ioctl(IOMMU_DESTROY) can't free the vdevice ID.
- iommufd_fops_release() can still free everything.
Link: https://patch.msgid.link/r/20250716070349.1807226-8-yilun.xu@linux.intel.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
no_viommu is not applicable for some viommu/vdevice tests. Explicitly
report the skipping, don't do it silently.
Opportunistically adjust the line wrappings after the indentation
changes using git clang-format.
Only add the prints. No functional change intended.
Link: https://patch.msgid.link/r/20250716070349.1807226-7-yilun.xu@linux.intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This has triggered an overflow inside the ioas iova auto allocation logic,
test it directly. Use the same stimulus syzkaller found.
Link: https://patch.msgid.link/all/2-v1-7b4a16fc390b+10f4-iommufd_alloc_overflow_jgg@nvidia.com/
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix handling of BPF arena relocations (Andrii Nakryiko)
- Fix race in bpf_arch_text_poke() on s390 (Ilya Leoshkevich)
- Fix use of virt_to_phys() on arm64 when mmapping BTF (Lorenz Bauer)
- Reject %p% format string in bprintf-like BPF helpers (Paul Chaignon)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: Fix handling of BPF arena relocations
btf: Fix virt_to_phys() on arm64 when mmapping BTF
selftests/bpf: Stress test attaching a BPF prog to another BPF prog
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
selftests/bpf: Add negative test cases for snprintf
bpf: Reject %p% format string in bprintf-like helpers
|
|
Add support for IPv6 environment for napi_id test.
Test Plan:
./run_kselftest.sh -t drivers/net:napi_id.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: napi_id.py
# TAP version 13
# 1..1
# ok 1 napi_id.test_napi_id
# # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: napi_id.py
Signed-off-by: Tianyi Cui <1997cui@gmail.com>
Link: https://patch.msgid.link/20250717011913.1248816-1-1997cui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-07-17
We've added 13 non-merge commits during the last 20 day(s) which contain
a total of 4 files changed, 712 insertions(+), 84 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a TCP bpf_iter,
from Jordan Rife.
2) Clarify the driver requirement on using the XDP metadata,
from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
doc: xdp: Clarify driver implementation for XDP Rx metadata
selftests/bpf: Add tests for bucket resume logic in established sockets
selftests/bpf: Create iter_tcp_destroy test program
selftests/bpf: Create established sockets in socket iterator tests
selftests/bpf: Make ehash buckets configurable in socket iterator tests
selftests/bpf: Allow for iteration over multiple states
selftests/bpf: Allow for iteration over multiple ports
selftests/bpf: Add tests for bucket resume logic in listening sockets
bpf: tcp: Avoid socket skips and repeats during iteration
bpf: tcp: Use bpf_tcp_iter_batch_item for bpf_tcp_iter_state batch items
bpf: tcp: Get rid of st_bucket_done
bpf: tcp: Make sure iter->batch always contains a full bucket snapshot
bpf: tcp: Make mem flags configurable through bpf_iter_tcp_realloc_batch
====================
Link: https://patch.msgid.link/20250717191731.4142326-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure Python doesn't buffer the output, otherwise for some
tests we may see false positive timeouts in NIPA. NIPA thinks that
a machine has hung if the test doesn't print anything for 3min.
This is also nice to heave for running the tests manually,
especially in vng.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250716205712.1787325-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test configuring input-xfrm and hash fields with all the limitations.
Tested on mlx5 (CX6):
# ./ksft-net-drv/drivers/net/hw/rss_api.py
TAP version 13
1..10
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm
ok 10 rss_api.test_rxfh_fields_ntf
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250716000331.1378807-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Help YNL decode the values for input-xfrm by defining
the possible values in the spec. Don't define "no change"
as it's an IOCTL artifact with no use in Netlink.
With this change on mlx5 input-xfrm gets decoded:
# ynl --family ethtool --dump rss-get
[{'header': {'dev-index': 2, 'dev-name': 'eth0'},
'hfunc': 1,
'hkey': b'V\xa8\xf9\x9 ...',
'indir': [0, 1, ... ],
'input-xfrm': {'sym-or-xor'}, <<<
'flow-hash': {'ah4': {'ip-dst', 'ip-src'},
'ah6': {'ip-dst', 'ip-src'},
'esp4': {'ip-dst', 'ip-src'},
'esp6': {'ip-dst', 'ip-src'},
'ip4': {'ip-dst', 'ip-src'},
'ip6': {'ip-dst', 'ip-src'},
'tcp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'tcp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'}}
}]
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test setting hashing key via Netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..7
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250716000331.1378807-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test setting indirection table via Netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..6
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_fields
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250716000331.1378807-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple tests check min queue count, create a helper.
Link: https://patch.msgid.link/20250716000331.1378807-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current cpu.max tests (both the normal one and the nested one) are broken.
They setup cpu.max with 1000 us quota and the default period (100,000 us).
A cpu hog is run for a duration of 1s as per wall clock time. This corresponds
to 10 periods, hence an expected usage of 10,000 us. We want the measured
usage (as per cpu.stat) to be close to 10,000 us.
Previously, this approximate equality test was done by
`!values_close(usage_usec, expected_usage_usec, 95)`: if the absolute
difference between usage_usec and expected_usage_usec is greater than 95% of
their sum, then we pass. And expected_usage_usec was set to 1,000,000 us.
Mathematically, this translates to the following being true for pass:
|usage - expected_usage| > (usage + expected_usage)*0.95
If usage > expected_usage:
usage - expected_usage > (usage + expected_usage)*0.95
0.05*usage > 1.95*expected_usage
usage > 39*expected_usage = 39s
If usage < expected_usage:
expected_usage - usage > (usage + expected_usage)*0.95
0.05*expected_usage > 1.95*usage
usage < 0.0256*expected_usage = 25,600 us
Combined,
Pass if usage < 25,600 us or > 39 s,
which makes no sense given that all we need is for usage_usec to be close to
10,000 us.
Fix this by explicitly calcuating the expected usage duration based on the
configured quota, default period, and the duration, and compare usage_usec
and expected_usage_usec using values_close() with a 10% error margin.
Also, use snprintf to get the quota string to write to cpu.max instead of
hardcoding the quota, ensuring a single source of truth.
Remove the check comparing user_usec and expected_usage_usec, since on running
this test modified with printfs, it's seen that user_usec and usage_usec can
regularly exceed the theoretical expected_usage_usec:
$ sudo ./test_cpu
user: 10485, usage: 10485, expected: 10000
ok 1 test_cpucg_max
user: 11127, usage: 11127, expected: 10000
ok 2 test_cpucg_max_nested
$ sudo ./test_cpu
user: 10286, usage: 10286, expected: 10000
ok 1 test_cpucg_max
user: 10404, usage: 11271, expected: 10000
ok 2 test_cpucg_max_nested
Hence, a values_close() check of usage_usec and expected_usage_usec is
sufficient.
Fixes: a79906570f9646ae17 ("cgroup: Add test_cpucg_max_nested() testcase")
Fixes: 889ab8113ef1386c57 ("cgroup: Add test_cpucg_max() testcase")
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc7).
Conflicts:
Documentation/netlink/specs/ovpn.yaml
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
af52020fc599 ("ovpn: reject unexpected netlink attributes")
drivers/net/phy/phy_device.c
a44312d58e78 ("net: phy: Don't register LEDs for genphy")
f0f2b992d818 ("net: phy: Don't register LEDs for genphy")
https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org
drivers/net/wireless/intel/iwlwifi/fw/regulatory.c
drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap")
ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware")
net/ipv6/mcast.c
ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()")
a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()")
https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN, WiFi and Netfilter.
More code here than I would have liked. That said, better now than
next week. Nothing particularly scary stands out. The improvement to
the OpenVPN input validation is a bit large but better get them in
before the code makes it to a final release. Some of the changes we
got from sub-trees could have been split better between the fix and
-next refactoring, IMHO, that has been communicated.
We have one known regression in a TI AM65 board not getting link. The
investigation is going a bit slow, a number of people are on vacation.
We'll try to wrap it up, but don't think it should hold up the
release.
Current release - fix to a fix:
- Bluetooth: L2CAP: fix attempting to adjust outgoing MTU, it broke
some headphones and speakers
Current release - regressions:
- wifi: ath12k: fix packets received in WBM error ring with REO LUT
enabled, fix Rx performance regression
- wifi: iwlwifi:
- fix crash due to a botched indexing conversion
- mask reserved bits in chan_state_active_bitmap, avoid FW assert()
Current release - new code bugs:
- nf_conntrack: fix crash due to removal of uninitialised entry
- eth: airoha: fix potential UaF in airoha_npu_get()
Previous releases - regressions:
- net: fix segmentation after TCP/UDP fraglist GRO
- af_packet: fix the SO_SNDTIMEO constraint not taking effect and a
potential soft lockup waiting for a completion
- rpl: fix UaF in rpl_do_srh_inline() for sneaky skb geometry
- virtio-net: fix recursive rtnl_lock() during probe()
- eth: stmmac: populate entire system_counterval_t in get_time_fn()
- eth: libwx: fix a number of crashes in the driver Rx path
- hv_netvsc: prevent IPv6 addrconf after IFF_SLAVE lost that meaning
Previous releases - always broken:
- mptcp: fix races in handling connection fallback to pure TCP
- rxrpc: assorted error handling and race fixes
- sched: another batch of "security" fixes for qdiscs (QFQ, HTB)
- tls: always refresh the queue when reading sock, avoid UaF
- phy: don't register LEDs for genphy, avoid deadlock
- Bluetooth: btintel: check if controller is ISO capable on
btintel_classify_pkt_type(), work around FW returning incorrect
capabilities
Misc:
- make OpenVPN Netlink input checking more strict before it makes it
to a final release
- wifi: cfg80211: remove scan request n_channels __counted_by, it's
only yielding false positives"
* tag 'net-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
rxrpc: Fix to use conn aborts for conn-wide failures
rxrpc: Fix transmission of an abort in response to an abort
rxrpc: Fix notification vs call-release vs recvmsg
rxrpc: Fix recv-recv race of completed call
rxrpc: Fix irq-disabled in local_bh_enable()
selftests/tc-testing: Test htb_dequeue_tree with deactivation and row emptying
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree
net: bridge: Do not offload IGMP/MLD messages
selftests: Add test cases for vlan_filter modification during runtime
net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime
tls: always refresh the queue when reading sock
virtio-net: fix recursived rtnl_lock() during probe()
net/mlx5: Update the list of the PCI supported devices
hv_netvsc: Set VF priv_flags to IFF_NO_ADDRCONF before open to prevent IPv6 addrconf
phonet/pep: Move call to pn_skb_get_dst_sockaddr() earlier in pep_sock_accept()
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
net: fix segmentation after TCP/UDP fraglist GRO
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
net: airoha: fix potential use-after-free in airoha_npu_get()
...
|
|
Ensure that any deactivation and row emptying that occurs
during htb_dequeue_tree does not cause a kernel panic.
This scenario originally triggered a kernel BUG_ON, and
we are checking for a graceful fail now.
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250717022912.221426-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases for vlan_filter modification during runtime, which
may triger null-ptr-ref or memory leak of vlan0.
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://patch.msgid.link/20250716034504.2285203-3-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Three patches to enhance conntrack selftests for resize and clash
resolution, from Florian Westphal.
2) Expand nft_concat_range.sh selftest to improve coverage from error
path, from Florian Westphal.
3) Hide clash bit to userspace from netlink dumps until there is a
good reason to expose, from Florian Westphal.
4) Revert notification for device registration/unregistration for
nftables basechains and flowtables, we decided to go for a better
way to handle this through the nfnetlink_hook infrastructure which
will come via nf-next, patch from Phil Sutter.
5) Fix crash in conntrack due to race related to SLAB_TYPESAFE_BY_RCU
that results in removing a recycled object that is not yet in the
hashes. Move IPS_CONFIRM setting after the object is in the hashes.
From Florian Westphal.
netfilter pull request 25-07-17
* tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
Revert "netfilter: nf_tables: Add notifications for hook changes"
netfilter: nf_tables: hide clash bit from userspace
selftests: netfilter: nft_concat_range.sh: send packets to empty set
selftests: netfilter: conntrack_resize.sh: also use udpclash tool
selftests: netfilter: add conntrack clash resolution test case
selftests: netfilter: conntrack_resize.sh: extend resize test
====================
Link: https://patch.msgid.link/20250717095808.41725-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some build environments for the selftests are not picking up the newly
added AT_HWCAP3 when using the libc headers, even with headers_install
(which we require already for the arm64 selftests). As a quick fix add
local definitions of the constant to tools use it, while auxvec.h is
installed with some toolchains it needs some persuasion to get picked up.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250715-arm64-selftest-bodge-hwcap3-v1-1-541b54bc43bb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As BPF doesn't include any barrier instructions, smp_mb() is implemented
by doing a dummy value returning atomic operation. Such an operation
acts a full barrier as enforced by LKMM and also by the work in progress
BPF memory model.
If the returned value is not used, clang[1] can optimize the value
returning atomic instruction in to a normal atomic instruction which
provides no ordering guarantees.
Mark the variable as volatile so the above optimization is never
performed and smp_mb() works as expected.
[1] https://godbolt.org/z/qzze7bG6z
Fixes: 88d706ba7cc5 ("selftests/bpf: Introduce arena spin lock")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250710175434.18829-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
