| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"9 hotfixes. 3 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. Only 4 are for MM"
* tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: add mmap_prepare() compatibility layer for nested file systems
init: fix build warnings about export.h
MAINTAINERS: add Barry as a THP reviewer
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
mm: close theoretical race where stale TLB entries could linger
mm/vma: reset VMA iterator on commit_merge() OOM failure
docs: proc: update VmFlags documentation in smaps
scatterlist: fix extraneous '@'-sign kernel-doc notation
selftests/mm: skip failed memfd setups in gup_longterm
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to
pass only the "untouched" addresses and flipping the shared/private
bit in the implementation.
- Disable SEV-SNP support on initialization failure
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY
KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY
KVM: SEV: Disable SEV-SNP support on initialization failure
KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases
KVM: arm64: selftests: Fix xVAL init in arch_timer_edge_cases
KVM: arm64: selftests: Fix thread migration in arch_timer_edge_cases
KVM: arm64: selftests: Fix help text for arch_timer_edge_cases
KVM: arm64: Make __vcpu_sys_reg() a pure rvalue operand
KVM: arm64: Don't use __vcpu_sys_reg() to get the address of a sysreg
KVM: arm64: Add RMW specific sysreg accessor
KVM: arm64: Add assignment-specific sysreg accessor
|
|
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
|
context
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unlike the other cases gup_longterm's memfd tests previously skipped the
test when failing to set up the file descriptor to test. Restore this
behavior to avoid hitting failures when hugetlb isn't configured.
Link: https://lkml.kernel.org/r/20250605-selftest-mm-gup-longterm-tweaks-v1-1-2fae34b05958@kernel.org
Fixes: 66bce7afbaca ("selftests/mm: fix test result reporting in gup_longterm")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Closes: https://lkml.kernel.org/r/a76fc252-0fe3-4d4b-a9a1-4a2895c2680d@lucifer.local
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Simple test for crash involving multicast loopback and stale dst.
Reuse exising NAT46 program.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
|
|
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
|
|
Make sure that detached trees don't receive mount propagation.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
|
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test about uprobe pte be orphan during vma merge.
[akpm@linux-foundation.org: include sys/syscall.h, per Lorenzo]
Link: https://lkml.kernel.org/r/20250529155650.4017699-5-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extract read_sysfs and write_sysfs into vm_util. Meanwhile, rename the
function in thuge-gen that has the same name as read_sysfs.
Link: https://lkml.kernel.org/r/20250529155650.4017699-4-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
[ alex: - Fix dynamic relocation
- Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/
- Add comment from Loongarch ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
|
|
Commit 846742f7e32f ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
arch_timer_edge_cases
arch_timer_edge_cases uses ~0 as the maximum counter value, however there's
no architectural guarantee that this is valid.
Figure out the effective counter width based on the effective frequency
like it's done by the kernel.
This also serves as a workaround for AC03_CPU_14 that led to the
following assertion failure on ampere-one machines:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:169: timer_condition == istatus
pid=11236 tid=11236 errno=4 - Interrupted system call
1 0x0000000000404ce7: test_run at arch_timer_edge_cases.c:938
2 0x0000000000401ebb: main at arch_timer_edge_cases.c:1053
3 0x0000ffff9fa8625b: ?? ??:0
4 0x0000ffff9fa8633b: ?? ??:0
5 0x0000000000401fef: _start at ??:?
0x1 != 0x0 (timer_condition != istatus)
Note that the following subtest only worked since the counter initialized
with CVAL_MAX would instantly overflow (which is no longer the case):
test_set_cnt_after_cval_no_irq(timer, 0, DEF_CNT, CVAL_MAX, sm);
To fix this we could swap CVAL_MAX for 0 here but since that is already
done by test_move_counters_behind_timers() let's remove that subtest.
Link: https://lore.kernel.org/kvmarm/ac1de1d2-ef2b-d439-dc48-8615e121b07b@redhat.com
Link: https://amperecomputing.com/assets/AmpereOne_Developer_ER_v0_80_20240823_28945022f4.pdf
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-5-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
arch_timer_edge_cases hits the following assertion in < 10% of the test runs:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:490: timer_get_cntct(timer) >= DEF_CNT + (timer_get_cntfrq() * (uint64_t)(delta_2_ms) / 1000)
pid=17110 tid=17110 errno=4 - Interrupted system call
1 0x0000000000404ec7: test_run at arch_timer_edge_cases.c:945
2 0x0000000000401fa3: main at arch_timer_edge_cases.c:1074
3 0x0000ffffa774b587: ?? ??:0
4 0x0000ffffa774b65f: ?? ??:0
5 0x000000000040206f: _start at ??:?
timer_get_cntct(timer) >= DEF_CNT + msec_to_cycles(delta_2_ms)
Enabling the timer without proper xval initialization in set_tval_irq()
resulted in an early interrupt during timer reprogramming. Make sure
to set the xval before setting the enable bit.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-4-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
arch_timer_edge_cases tries to migrate itself across host cpus. Before
the first test, it migrates to cpu 0 by setting up an affinity mask with
only bit 0 set. After that it looks for the next possible cpu in the
current affinity mask which still has only bit 0 set. So there is no
migration at all.
Fix this by reading the default mask at start and use this to find
the next cpu in each iteration.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-3-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix the help text for arch_timer_edge_cases to show the correct
option for setting the wait time.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-2-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise
next lookup could bogusly report a mismatch. This is followed by two
patches to update nft_pipapo selftests to cover for the previous bug.
From Florian Westphal.
2) Check for reverse tuple too in case of esoteric NAT collisions for
UDP traffic and extend selftest coverage. Also from Florian.
netfilter pull request 25-06-05
* tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
netfilter: nf_set_pipapo_avx2: fix initial map fill
====================
Link: https://patch.msgid.link/20250605085735.52205-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
In this batch you can find the following bug fixes:
Patch 1: when releasing a UDP socket we were wrongly invoking
setup_udp_tunnel_sock() with an empty config. This was not
properly shutting down the UDP encap state.
With this patch we simply undo what was done during setup.
Patch 2: ovpn was holding a reference to a 'struct socket'
without increasing its reference counter. This was intended
and worked as expected until we hit a race condition where
user space tries to close the socket while kernel space is
also releasing it. In this case the (struct socket *)->sk
member would disappear under our feet leading to a null-ptr-deref.
This patch fixes this issue by having struct ovpn_socket hold
a reference directly to the sk member while also increasing
its reference counter.
Patch 3: in case of errors along the TCP RX path (softirq)
we want to immediately delete the peer, but this operation may
sleep. With this patch we move the peer deletion to a scheduled
worker.
Patch 4 and 5 are instead fixing minor issues in the ovpn
kselftests.
* tag 'ovpn-net-20250603' of https://github.com/OpenVPN/ovpn-net-next:
selftest/net/ovpn: fix missing file
selftest/net/ovpn: fix TCP socket creation
ovpn: avoid sleep in atomic context in TCP RX error path
ovpn: ensure sk is still valid during cleanup
ovpn: properly deconfigure UDP-tunnel
====================
Link: https://patch.msgid.link/20250603111110.4575-1-antonio@openvpn.net/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This will fail without the previous bug fix because we erronously
believe that the clashing entry went way.
However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""
This is partially adapted from test instructions from the below
ubuntu tracker.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2109889
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
commit 0935ee6032df ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
testing
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
"Two small fixes to selftests"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix selftest btf_tag/btf_type_tag_percpu_vmlinux_helper failure
selftests/bpf: Fix bpf selftest build error
|
|
Some failure modes are handled poorly by kublk. For example, if ublk_drv
is built as a module but not currently loaded into the kernel, ./kublk
add ... just hangs forever. This happens because in this case (and a few
others), the worker process does not notify its parent (via a write to
the shared eventfd) that it has tried and failed to initialize, so the
parent hangs forever. Fix this by ensuring that we always notify the
parent process of any initialization failure, and have the parent print
a (not very descriptive) log line when this happens.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250603-ublk_init_fail-v1-1-87c91486230e@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
|
|
test-large-mtu.sh is referenced by the Makefile
but does not exist.
Add it along the other scripts.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
TCP sockets cannot be created with AF_UNSPEC, but
one among the supported family must be used.
Since commit 944f8b6abab6 ("selftest/net/ovpn: extend
coverage with more test cases") the default address
family for all tests was changed from AF_INET to AF_UNSPEC,
thus breaking all TCP cases.
Restore AF_INET as default address family for TCP listeners.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit a571a9a1b120264e24b41eddf1ac5140131bfa84.
The commit in question breaks kunit for older compilers:
$ gcc --version
gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-5)
$ ./tools/testing/kunit/kunit.py run --alltests --json --arch=x86_64
Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=x86_64 O=.kunit olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_INIT_STACK_ALL_PATTERN=y
Link: https://lore.kernel.org/20250529083811.778bc31b@kernel.org
Fixes: a571a9a1b120 ("kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250530135800.13437-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
We have stress_03, stress_04 and stress_05 for checking new feature vs.
stress IO & device removal & ublk server crash & recovery, so let the
three existing stress tests cover PER_IO_DAEMON.
Then stress_06 can be removed, since the same test function is included in
stress_03.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250602132113.1398645-1-ming.lei@redhat.com
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
[axboe: remove test_stress_06.sh from Makefile too]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ihor Solodrai reported selftest 'btf_tag/btf_type_tag_percpu_vmlinux_helper'
failure ([1]) during 6.16 merge window. The failure log:
...
7: (15) if r0 == 0x0 goto pc+1 ; R0=ptr_css_rstat_cpu()
; *(volatile int *)rstat; @ btf_type_tag_percpu.c:68
8: (61) r1 = *(u32 *)(r0 +0)
cannot access ptr member updated_children with moff 0 in struct css_rstat_cpu with off 0 size 4
Two changes are needed. First, 'struct cgroup_rstat_cpu' needs to be
replaced with 'struct css_rstat_cpu' to be consistent with new data
structure. Second, layout of 'css_rstat_cpu' is changed compared
to 'cgroup_rstat_cpu'. The first member becomes a pointer so
the bpf prog needs to do 8-byte load instead of 4-byte load.
[1] https://lore.kernel.org/bpf/6f688f2e-7d26-423a-9029-d1b1ef1c938a@linux.dev/
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20250529201151.1787575-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On linux-next, build for bpf selftest displays an error due to
mismatch in the expected function signature of bpf_testmod_test_read
and bpf_testmod_test_write.
Commit 97d06802d10a ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
changed the required type for struct bin_attribute to const struct bin_attribute.
To resolve the error, update corresponding signature for the callback.
Fixes: 97d06802d10a ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/e915da49-2b9a-4c4c-a34f-877f378129f6@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512091108.2015615-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The gup_longterm test fails to follow this pattern,
it runs a single test function repeatedly with various parameters but each
result report is a string logging an error message which is fixed between
runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-4-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The cow test completely fails to follow this
pattern, it runs test functions repeatedly with various parameters with
each result report from those functions being a string logging an error
message which is fixed between runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-3-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several of the MM tests have a pattern of printing a description of the
test to be run then reporting the actual TAP result using a generic string
not connected to the specific test, often in a shared function used by
many tests. The name reported typically varies depending on the specific
result rather than the test too. This causes problems for tooling that
works with test results, the names reported with the results are used to
deduplicate tests and track them between runs so both duplicated names and
changing names cause trouble for things like UIs and automated bisection.
As a first step towards matching these tests better with the expectations
of kselftest provide helpers which record the test name as part of the
initial print and then use that as part of reporting a result.
This is not added as a generic kselftest helper partly because the use of
a variable to store the test name doesn't fit well with the header only
implementation of kselftest.h and partly because it's not really an
intended pattern. Ideally at some point the mm tests that use it will be
updated to not need it.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-2-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: cow and gup_longterm cleanups", v2.
The bulk of these changes modify the cow and gup_longterm tests to report
unique and stable names for each test, bringing them into line with the
expectations of tooling that works with kselftest. The string reported as
a test result is used by tooling to both deduplicate tests and track tests
between test runs, using the same string for multiple tests or changing
the string depending on test result causes problems for user interfaces
and automation such as bisection.
It was suggested that converting to use kselftest_harness.h would be a
good way of addressing this, however that really wants the set of tests to
run to be known at compile time but both test programs dynamically
enumarate the set of huge page sizes the system supports and test each.
Refactoring to handle this would be even more invasive than these changes
which are large but straightforward and repetitive.
A version of the main gup_longterm cleanup was previously sent separately,
this version factors out the helpers for logging the start of the test
since the cow test looks very similar.
This patch (of 4):
The cow and gup_longterm test programs open code something that looks a
lot like the standard ksft_finished() helper to summarise the test results
and provide an exit code, convert to use ksft_finished().
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-0-ff198df8e38e@kernel.org
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-1-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_DAMON_SYSFS is disabled, the selftests fail with the following
outputs,
not ok 2 selftests: damon: sysfs_update_schemes_tried_regions_wss_estimation.py # exit=1
not ok 3 selftests: damon: damos_quota.py # exit=1
not ok 4 selftests: damon: damos_quota_goal.py # exit=1
not ok 5 selftests: damon: damos_apply_interval.py # exit=1
not ok 6 selftests: damon: damos_tried_regions.py # exit=1
not ok 7 selftests: damon: damon_nr_regions.py # exit=1
not ok 11 selftests: damon: sysfs_update_schemes_tried_regions_hang.py # exit=1
The root cause of this issue is that all the testcases above do not check
the sysfs interface of DAMON whether it exists or not. With this patch
applied, all the testcases above now pass successfully.
Link: https://lkml.kernel.org/r/20250531093937.1555159-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Check if "procmap_out->fd" is negative instead of "procmap_out" (which is
a pointer).
Link: https://lkml.kernel.org/r/aDbFuUTlJTBqziVd@stanley.mountain
Fixes: bd23f293a0d5 ("tools/testing: add PROCMAP_QUERY helper functions in mm self tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: levi.yun <yeoreum.yun@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The hugetlb fix introduced in commit ee40c9920ac2 ("mm: fix copy_vma()
error handling for hugetlb mappings") mistakenly did not provide a stub
for the VMA userland testing, which results in a compile error when trying
to build this.
Provide this stub to resolve the issue.
Link: https://lkml.kernel.org/r/20250528-fix-vma-test-v1-1-c8a5f533b38f@oracle.com
Fixes: ee40c9920ac2 ("mm: fix copy_vma() error handling for hugetlb mappings")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
