Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscHEADmaster

Pull Char/Misc/IIO/Binder updates from Greg KH:
 "Here is the big set of char/misc/iio and other driver subsystem
  changes for 6.18-rc1.

  Loads of different stuff in here, it was a busy development cycle in
  lots of different subsystems, with over 27k new lines added to the
  tree.

  Included in here are:

   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems

   - MEI driver updates and additions

   - NVMEM driver updates

   - slimbus removal for an unused driver and some other minor updates

   - coresight driver updates and additions

   - MHI driver updates

   - comedi driver updates and fixes

   - extcon driver updates

   - interconnect driver additions

   - eeprom driver updates and fixes

   - minor UIO driver updates

   - tiny W1 driver updates

  But the majority of new code is in the rust bindings and additions,
  which includes:

   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.

   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here. I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.

   - Android Binder driver implemented in Rust.

     This is the big one, and was driving a huge majority of the rust
     binding work over the past years. Right now there are two binder
     drivers in the kernel, selected only at build time as to which one
     to use as binder wants to be included in the system at boot time.

     The binder C maintainers all agreed on this, as eventually, they
     want the C code to be removed from the tree, but it will take a few
     releases to get there while both are maintained to ensure that the
     rust implementation is fully stable and compliant with the existing
     userspace apis.

  All of these have been in linux-next for a while"

* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
  rust: usb: keep usb::Device private for now
  rust: usb: don't retain device context for the interface parent
  USB: disable rust bindings from the build for now
  samples: rust: add a USB driver sample
  rust: usb: add basic USB abstractions
  coresight: Add label sysfs node support
  dt-bindings: arm: Add label in the coresight components
  coresight: tnoc: add new AMBA ID to support Trace Noc V2
  coresight: Fix incorrect handling for return value of devm_kzalloc
  coresight: tpda: fix the logic to setup the element size
  coresight: trbe: Return NULL pointer for allocation failures
  coresight: Refactor runtime PM
  coresight: Make clock sequence consistent
  coresight: Refactor driver data allocation
  coresight: Consolidate clock enabling
  coresight: Avoid enable programming clock duplicately
  coresight: Appropriately disable trace bus clocks
  coresight: Appropriately disable programming clocks
  coresight: etm4x: Support atclk
  coresight: catu: Support atclk
  ...

1 files changed, 606 insertions, 0 deletions

diff --git a/drivers/misc/eeprom/m24lr.c b/drivers/misc/eeprom/m24lr.c
new file mode 100644
index 000000000000..7a9fd45a8e46
--- /dev/null
+++ b/drivers/misc/eeprom/m24lr.c
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * m24lr.c - Sysfs control interface for ST M24LR series RFID/NFC chips
+ *
+ * Copyright (c) 2025 Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
+ *
+ * This driver implements both the sysfs-based control interface and EEPROM
+ * access for STMicroelectronics M24LR series chips (e.g., M24LR04E-R).
+ * It provides access to control registers for features such as password
+ * authentication, memory protection, and device configuration. In addition,
+ * it manages read and write operations to the EEPROM region of the chip.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define M24LR_WRITE_TIMEOUT	  25u
+#define M24LR_READ_TIMEOUT	  (M24LR_WRITE_TIMEOUT)
+
+/**
+ * struct m24lr_chip - describes chip-specific sysfs layout
+ * @sss_len:       the length of the sss region
+ * @page_size:	   chip-specific limit on the maximum number of bytes allowed
+ *		   in a single write operation.
+ * @eeprom_size:   size of the EEPROM in byte
+ *
+ * Supports multiple M24LR chip variants (e.g., M24LRxx) by allowing each
+ * to define its own set of sysfs attributes, depending on its available
+ * registers and features.
+ */
+struct m24lr_chip {
+	unsigned int sss_len;
+	unsigned int page_size;
+	unsigned int eeprom_size;
+};
+
+/**
+ * struct m24lr - core driver data for M24LR chip control
+ * @uid:           64 bits unique identifier stored in the device
+ * @sss_len:       the length of the sss region
+ * @page_size:	   chip-specific limit on the maximum number of bytes allowed
+ *		   in a single write operation.
+ * @eeprom_size:   size of the EEPROM in byte
+ * @ctl_regmap:	   regmap interface for accessing the system parameter sector
+ * @eeprom_regmap: regmap interface for accessing the EEPROM
+ * @lock:	   mutex to synchronize operations to the device
+ *
+ * Central data structure holding the state and resources used by the
+ * M24LR device driver.
+ */
+struct m24lr {
+	u64 uid;
+	unsigned int sss_len;
+	unsigned int page_size;
+	unsigned int eeprom_size;
+	struct regmap *ctl_regmap;
+	struct regmap *eeprom_regmap;
+	struct mutex lock;	 /* synchronize operations to the device */
+};
+
+static const struct regmap_range m24lr_ctl_vo_ranges[] = {
+	regmap_reg_range(0, 63),
+};
+
+static const struct regmap_access_table m24lr_ctl_vo_table = {
+	.yes_ranges = m24lr_ctl_vo_ranges,
+	.n_yes_ranges = ARRAY_SIZE(m24lr_ctl_vo_ranges),
+};
+
+static const struct regmap_config m24lr_ctl_regmap_conf = {
+	.name = "m24lr_ctl",
+	.reg_stride = 1,
+	.reg_bits = 16,
+	.val_bits = 8,
+	.disable_locking = false,
+	.cache_type = REGCACHE_RBTREE,/* Flat can't be used, there's huge gap */
+	.volatile_table = &m24lr_ctl_vo_table,
+};
+
+/* Chip descriptor for M24LR04E-R variant */
+static const struct m24lr_chip m24lr04e_r_chip = {
+	.page_size = 4,
+	.eeprom_size = 512,
+	.sss_len = 4,
+};
+
+/* Chip descriptor for M24LR16E-R variant */
+static const struct m24lr_chip m24lr16e_r_chip = {
+	.page_size = 4,
+	.eeprom_size = 2048,
+	.sss_len = 16,
+};
+
+/* Chip descriptor for M24LR64E-R variant */
+static const struct m24lr_chip m24lr64e_r_chip = {
+	.page_size = 4,
+	.eeprom_size = 8192,
+	.sss_len = 64,
+};
+
+static const struct i2c_device_id m24lr_ids[] = {
+	{ "m24lr04e-r", (kernel_ulong_t)&m24lr04e_r_chip},
+	{ "m24lr16e-r", (kernel_ulong_t)&m24lr16e_r_chip},
+	{ "m24lr64e-r", (kernel_ulong_t)&m24lr64e_r_chip},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, m24lr_ids);
+
+static const struct of_device_id m24lr_of_match[] = {
+	{ .compatible = "st,m24lr04e-r", .data = &m24lr04e_r_chip},
+	{ .compatible = "st,m24lr16e-r", .data = &m24lr16e_r_chip},
+	{ .compatible = "st,m24lr64e-r", .data = &m24lr64e_r_chip},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, m24lr_of_match);
+
+/**
+ * m24lr_regmap_read - read data using regmap with retry on failure
+ * @regmap:  regmap instance for the device
+ * @buf:     buffer to store the read data
+ * @size:    number of bytes to read
+ * @offset:  starting register address
+ *
+ * Attempts to read a block of data from the device with retries and timeout.
+ * Some M24LR chips may transiently NACK reads (e.g., during internal write
+ * cycles), so this function retries with a short sleep until the timeout
+ * expires.
+ *
+ * Returns:
+ *	 Number of bytes read on success,
+ *	 -ETIMEDOUT if the read fails within the timeout window.
+ */
+static ssize_t m24lr_regmap_read(struct regmap *regmap, u8 *buf,
+				 size_t size, unsigned int offset)
+{
+	int err;
+	unsigned long timeout, read_time;
+	ssize_t ret = -ETIMEDOUT;
+
+	timeout = jiffies + msecs_to_jiffies(M24LR_READ_TIMEOUT);
+	do {
+		read_time = jiffies;
+
+		err = regmap_bulk_read(regmap, offset, buf, size);
+		if (!err) {
+			ret = size;
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	} while (time_before(read_time, timeout));
+
+	return ret;
+}
+
+/**
+ * m24lr_regmap_write - write data using regmap with retry on failure
+ * @regmap: regmap instance for the device
+ * @buf:    buffer containing the data to write
+ * @size:   number of bytes to write
+ * @offset: starting register address
+ *
+ * Attempts to write a block of data to the device with retries and a timeout.
+ * Some M24LR devices may NACK I2C writes while an internal write operation
+ * is in progress. This function retries the write operation with a short delay
+ * until it succeeds or the timeout is reached.
+ *
+ * Returns:
+ *	 Number of bytes written on success,
+ *	 -ETIMEDOUT if the write fails within the timeout window.
+ */
+static ssize_t m24lr_regmap_write(struct regmap *regmap, const u8 *buf,
+				  size_t size, unsigned int offset)
+{
+	int err;
+	unsigned long timeout, write_time;
+	ssize_t ret = -ETIMEDOUT;
+
+	timeout = jiffies + msecs_to_jiffies(M24LR_WRITE_TIMEOUT);
+
+	do {
+		write_time = jiffies;
+
+		err = regmap_bulk_write(regmap, offset, buf, size);
+		if (!err) {
+			ret = size;
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	} while (time_before(write_time, timeout));
+
+	return ret;
+}
+
+static ssize_t m24lr_read(struct m24lr *m24lr, u8 *buf, size_t size,
+			  unsigned int offset, bool is_eeprom)
+{
+	struct regmap *regmap;
+	ssize_t ret;
+
+	if (is_eeprom)
+		regmap = m24lr->eeprom_regmap;
+	else
+		regmap = m24lr->ctl_regmap;
+
+	mutex_lock(&m24lr->lock);
+	ret = m24lr_regmap_read(regmap, buf, size, offset);
+	mutex_unlock(&m24lr->lock);
+
+	return ret;
+}
+
+/**
+ * m24lr_write - write buffer to M24LR device with page alignment handling
+ * @m24lr:     pointer to driver context
+ * @buf:       data buffer to write
+ * @size:      number of bytes to write
+ * @offset:    target register address in the device
+ * @is_eeprom: true if the write should target the EEPROM,
+ *             false if it should target the system parameters sector.
+ *
+ * Writes data to the M24LR device using regmap, split into chunks no larger
+ * than page_size to respect device-specific write limitations (e.g., page
+ * size or I2C hold-time concerns). Each chunk is aligned to the page boundary
+ * defined by page_size.
+ *
+ * Returns:
+ *	 Total number of bytes written on success,
+ *	 A negative error code if any write fails.
+ */
+static ssize_t m24lr_write(struct m24lr *m24lr, const u8 *buf, size_t size,
+			   unsigned int offset, bool is_eeprom)
+{
+	unsigned int n, next_sector;
+	struct regmap *regmap;
+	ssize_t ret = 0;
+	ssize_t err;
+
+	if (is_eeprom)
+		regmap = m24lr->eeprom_regmap;
+	else
+		regmap = m24lr->ctl_regmap;
+
+	n = min_t(unsigned int, size, m24lr->page_size);
+	next_sector = roundup(offset + 1, m24lr->page_size);
+	if (offset + n > next_sector)
+		n = next_sector - offset;
+
+	mutex_lock(&m24lr->lock);
+	while (n) {
+		err = m24lr_regmap_write(regmap, buf + offset, n, offset);
+		if (IS_ERR_VALUE(err)) {
+			if (!ret)
+				ret = err;
+
+			break;
+		}
+
+		offset += n;
+		size -= n;
+		ret += n;
+		n = min_t(unsigned int, size, m24lr->page_size);
+	}
+	mutex_unlock(&m24lr->lock);
+
+	return ret;
+}
+
+/**
+ * m24lr_write_pass - Write password to M24LR043-R using secure format
+ * @m24lr: Pointer to device control structure
+ * @buf:   Input buffer containing hex-encoded password
+ * @count: Number of bytes in @buf
+ * @code:  Operation code to embed between password copies
+ *
+ * This function parses a 4-byte password, encodes it in  big-endian format,
+ * and constructs a 9-byte sequence of the form:
+ *
+ *	  [BE(password), code, BE(password)]
+ *
+ * The result is written to register 0x0900 (2304), which is the password
+ * register in M24LR04E-R chip.
+ *
+ * Return: Number of bytes written on success, or negative error code on failure
+ */
+static ssize_t m24lr_write_pass(struct m24lr *m24lr, const char *buf,
+				size_t count, u8 code)
+{
+	__be32 be_pass;
+	u8 output[9];
+	ssize_t ret;
+	u32 pass;
+	int err;
+
+	if (!count)
+		return -EINVAL;
+
+	if (count > 8)
+		return -EINVAL;
+
+	err = kstrtou32(buf, 16, &pass);
+	if (err)
+		return err;
+
+	be_pass = cpu_to_be32(pass);
+
+	memcpy(output, &be_pass, sizeof(be_pass));
+	output[4] = code;
+	memcpy(output + 5, &be_pass, sizeof(be_pass));
+
+	mutex_lock(&m24lr->lock);
+	ret = m24lr_regmap_write(m24lr->ctl_regmap, output, 9, 2304);
+	mutex_unlock(&m24lr->lock);
+
+	return ret;
+}
+
+static ssize_t m24lr_read_reg_le(struct m24lr *m24lr, u64 *val,
+				 unsigned int reg_addr,
+				 unsigned int reg_size)
+{
+	ssize_t ret;
+	__le64 input = 0;
+
+	ret = m24lr_read(m24lr, (u8 *)&input, reg_size, reg_addr, false);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	if (ret != reg_size)
+		return -EINVAL;
+
+	switch (reg_size) {
+	case 1:
+		*val = *(u8 *)&input;
+		break;
+	case 2:
+		*val = le16_to_cpu((__le16)input);
+		break;
+	case 4:
+		*val = le32_to_cpu((__le32)input);
+		break;
+	case 8:
+		*val = le64_to_cpu((__le64)input);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int m24lr_nvmem_read(void *priv, unsigned int offset, void *val,
+			    size_t bytes)
+{
+	ssize_t err;
+	struct m24lr *m24lr = priv;
+
+	if (!bytes)
+		return bytes;
+
+	if (offset + bytes > m24lr->eeprom_size)
+		return -EINVAL;
+
+	err = m24lr_read(m24lr, val, bytes, offset, true);
+	if (IS_ERR_VALUE(err))
+		return err;
+
+	return 0;
+}
+
+static int m24lr_nvmem_write(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	ssize_t err;
+	struct m24lr *m24lr = priv;
+
+	if (!bytes)
+		return -EINVAL;
+
+	if (offset + bytes > m24lr->eeprom_size)
+		return -EINVAL;
+
+	err = m24lr_write(m24lr, val, bytes, offset, true);
+	if (IS_ERR_VALUE(err))
+		return err;
+
+	return 0;
+}
+
+static ssize_t m24lr_ctl_sss_read(struct file *filep, struct kobject *kobj,
+				  const struct bin_attribute *attr, char *buf,
+				  loff_t offset, size_t count)
+{
+	struct m24lr *m24lr = attr->private;
+
+	if (!count)
+		return count;
+
+	if (size_add(offset, count) > m24lr->sss_len)
+		return -EINVAL;
+
+	return m24lr_read(m24lr, buf, count, offset, false);
+}
+
+static ssize_t m24lr_ctl_sss_write(struct file *filep, struct kobject *kobj,
+				   const struct bin_attribute *attr, char *buf,
+				   loff_t offset, size_t count)
+{
+	struct m24lr *m24lr = attr->private;
+
+	if (!count)
+		return -EINVAL;
+
+	if (size_add(offset, count) > m24lr->sss_len)
+		return -EINVAL;
+
+	return m24lr_write(m24lr, buf, count, offset, false);
+}
+static BIN_ATTR(sss, 0600, m24lr_ctl_sss_read, m24lr_ctl_sss_write, 0);
+
+static ssize_t new_pass_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return m24lr_write_pass(m24lr, buf, count, 7);
+}
+static DEVICE_ATTR_WO(new_pass);
+
+static ssize_t unlock_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return m24lr_write_pass(m24lr, buf, count, 9);
+}
+static DEVICE_ATTR_WO(unlock);
+
+static ssize_t uid_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sysfs_emit(buf, "%llx\n", m24lr->uid);
+}
+static DEVICE_ATTR_RO(uid);
+
+static ssize_t total_sectors_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sysfs_emit(buf, "%x\n", m24lr->sss_len);
+}
+static DEVICE_ATTR_RO(total_sectors);
+
+static struct attribute *m24lr_ctl_dev_attrs[] = {
+	&dev_attr_unlock.attr,
+	&dev_attr_new_pass.attr,
+	&dev_attr_uid.attr,
+	&dev_attr_total_sectors.attr,
+	NULL,
+};
+
+static const struct m24lr_chip *m24lr_get_chip(struct device *dev)
+{
+	const struct m24lr_chip *ret;
+	const struct i2c_device_id *id;
+
+	id = i2c_match_id(m24lr_ids, to_i2c_client(dev));
+
+	if (dev->of_node && of_match_device(m24lr_of_match, dev))
+		ret = of_device_get_match_data(dev);
+	else if (id)
+		ret = (void *)id->driver_data;
+	else
+		ret = acpi_device_get_match_data(dev);
+
+	return ret;
+}
+
+static int m24lr_probe(struct i2c_client *client)
+{
+	struct regmap_config eeprom_regmap_conf = {0};
+	struct nvmem_config nvmem_conf = {0};
+	struct device *dev = &client->dev;
+	struct i2c_client *eeprom_client;
+	const struct m24lr_chip *chip;
+	struct regmap *eeprom_regmap;
+	struct nvmem_device *nvmem;
+	struct regmap *ctl_regmap;
+	struct m24lr *m24lr;
+	u32 regs[2];
+	long err;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
+	chip = m24lr_get_chip(dev);
+	if (!chip)
+		return -ENODEV;
+
+	m24lr = devm_kzalloc(dev, sizeof(struct m24lr), GFP_KERNEL);
+	if (!m24lr)
+		return -ENOMEM;
+
+	err = device_property_read_u32_array(dev, "reg", regs, ARRAY_SIZE(regs));
+	if (err)
+		return dev_err_probe(dev, err, "Failed to read 'reg' property\n");
+
+	/* Create a second I2C client for the eeprom interface */
+	eeprom_client = devm_i2c_new_dummy_device(dev, client->adapter, regs[1]);
+	if (IS_ERR(eeprom_client))
+		return dev_err_probe(dev, PTR_ERR(eeprom_client),
+				     "Failed to create dummy I2C client for the EEPROM\n");
+
+	ctl_regmap = devm_regmap_init_i2c(client, &m24lr_ctl_regmap_conf);
+	if (IS_ERR(ctl_regmap))
+		return dev_err_probe(dev, PTR_ERR(ctl_regmap),
+				      "Failed to init regmap\n");
+
+	eeprom_regmap_conf.name = "m24lr_eeprom";
+	eeprom_regmap_conf.reg_bits = 16;
+	eeprom_regmap_conf.val_bits = 8;
+	eeprom_regmap_conf.disable_locking = true;
+	eeprom_regmap_conf.max_register = chip->eeprom_size - 1;
+
+	eeprom_regmap = devm_regmap_init_i2c(eeprom_client,
+					     &eeprom_regmap_conf);
+	if (IS_ERR(eeprom_regmap))
+		return dev_err_probe(dev, PTR_ERR(eeprom_regmap),
+				     "Failed to init regmap\n");
+
+	mutex_init(&m24lr->lock);
+	m24lr->sss_len = chip->sss_len;
+	m24lr->page_size = chip->page_size;
+	m24lr->eeprom_size = chip->eeprom_size;
+	m24lr->eeprom_regmap = eeprom_regmap;
+	m24lr->ctl_regmap = ctl_regmap;
+
+	nvmem_conf.dev = &eeprom_client->dev;
+	nvmem_conf.owner = THIS_MODULE;
+	nvmem_conf.type = NVMEM_TYPE_EEPROM;
+	nvmem_conf.reg_read = m24lr_nvmem_read;
+	nvmem_conf.reg_write = m24lr_nvmem_write;
+	nvmem_conf.size = chip->eeprom_size;
+	nvmem_conf.word_size = 1;
+	nvmem_conf.stride = 1;
+	nvmem_conf.priv = m24lr;
+
+	nvmem = devm_nvmem_register(dev, &nvmem_conf);
+	if (IS_ERR(nvmem))
+		return dev_err_probe(dev, PTR_ERR(nvmem),
+				     "Failed to register nvmem\n");
+
+	i2c_set_clientdata(client, m24lr);
+	i2c_set_clientdata(eeprom_client, m24lr);
+
+	bin_attr_sss.size = chip->sss_len;
+	bin_attr_sss.private = m24lr;
+	err = sysfs_create_bin_file(&dev->kobj, &bin_attr_sss);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to create sss bin file\n");
+
+	/* test by reading the uid, if success store it */
+	err = m24lr_read_reg_le(m24lr, &m24lr->uid, 2324, sizeof(m24lr->uid));
+	if (IS_ERR_VALUE(err))
+		goto remove_bin_file;
+
+	return 0;
+
+remove_bin_file:
+	sysfs_remove_bin_file(&dev->kobj, &bin_attr_sss);
+
+	return err;
+}
+
+static void m24lr_remove(struct i2c_client *client)
+{
+	sysfs_remove_bin_file(&client->dev.kobj, &bin_attr_sss);
+}
+
+ATTRIBUTE_GROUPS(m24lr_ctl_dev);
+
+static struct i2c_driver m24lr_driver = {
+	.driver = {
+		.name = "m24lr",
+		.of_match_table = m24lr_of_match,
+		.dev_groups = m24lr_ctl_dev_groups,
+	},
+	.probe	  = m24lr_probe,
+	.remove = m24lr_remove,
+	.id_table = m24lr_ids,
+};
+module_i2c_driver(m24lr_driver);
+
+MODULE_AUTHOR("Abd-Alrhman Masalkhi");
+MODULE_DESCRIPTION("st m24lr control driver");
+MODULE_LICENSE("GPL");