diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/cdns,gpio.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/cdns,gpio.txt | 43 |
1 files changed, 0 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt deleted file mode 100644 index 706ef00f5c64..000000000000 --- a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt +++ /dev/null @@ -1,43 +0,0 @@ -Cadence GPIO controller bindings - -Required properties: -- compatible: should be "cdns,gpio-r1p02". -- reg: the register base address and size. -- #gpio-cells: should be 2. - * first cell is the GPIO number. - * second cell specifies the GPIO flags, as defined in - <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH - and GPIO_ACTIVE_LOW flags are supported. -- gpio-controller: marks the device as a GPIO controller. -- clocks: should contain one entry referencing the peripheral clock driving - the GPIO controller. - -Optional properties: -- ngpios: integer number of gpio lines supported by this controller, up to 32. -- interrupts: interrupt specifier for the controllers interrupt. -- interrupt-controller: marks the device as an interrupt controller. When - defined, interrupts, interrupt-parent and #interrupt-cells - are required. -- interrupt-cells: should be 2. - * first cell is the GPIO number you want to use as an IRQ source. - * second cell specifies the IRQ type, as defined in - <dt-bindings/interrupt-controller/irq.h>. - Currently only level sensitive IRQs are supported. - - -Example: - gpio0: gpio-controller@fd060000 { - compatible = "cdns,gpio-r1p02"; - reg =<0xfd060000 0x1000>; - - clocks = <&gpio_clk>; - - interrupt-parent = <&gic>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; |