diff options
Diffstat (limited to 'Documentation')
353 files changed, 9383 insertions, 3261 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-bus-iio b/Documentation/ABI/obsolete/sysfs-bus-iio index b64394b0b374..a13523561958 100644 --- a/Documentation/ABI/obsolete/sysfs-bus-iio +++ b/Documentation/ABI/obsolete/sysfs-bus-iio @@ -48,10 +48,6 @@ What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en @@ -73,10 +69,6 @@ What: /sys/.../iio:deviceX/scan_elements/in_incli_type What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type What: /sys/.../iio:deviceX/scan_elements/in_voltage_type What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type What: /sys/.../iio:deviceX/scan_elements/in_pressure_type @@ -110,10 +102,6 @@ Description: What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index -What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index -What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index -What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index diff --git a/Documentation/ABI/obsolete/sysfs-driver-samsung-laptop b/Documentation/ABI/obsolete/sysfs-driver-samsung-laptop new file mode 100644 index 000000000000..204c3f3a1d78 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-samsung-laptop @@ -0,0 +1,10 @@ +What: /sys/devices/platform/samsung/battery_life_extender +Date: December 1, 2011 +KernelVersion: 3.3 +Contact: Corentin Chary <corentin.chary@gmail.com> +Description: Max battery charge level can be modified, battery cycle + life can be extended by reducing the max battery charge + level. + + - 0 means normal battery mode (100% charge) + - 1 means battery life extender mode (80% charge) diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index da1345d854b4..0d3f12c4dcbd 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -19,14 +19,22 @@ Description: /export ... asks the kernel to export a GPIO to userspace /unexport ... to return a GPIO to the kernel /gpioN ... for each exported GPIO #N OR - /<LINE-NAME> ... for a properly named GPIO line /value ... always readable, writes fail for input GPIOs /direction ... r/w as: in, out (default low); write: high, low /edge ... r/w as: none, falling, rising, both + /active_low ... r/w as: 0, 1 /gpiochipN ... for each gpiochip; #N is its first GPIO /base ... (r/o) same as N - /label ... (r/o) descriptive, not necessarily unique + /label ... (r/o) descriptive chip name /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1) + /gpio<OFFSET> + /value ... always readable, writes fail for input GPIOs + /direction ... r/w as: in, out (default low); write: high, low + /chipX ... for each gpiochip; #X is the gpio device ID + /export ... asks the kernel to export a GPIO at HW offset X to userspace + /unexport ... to return a GPIO at HW offset X to the kernel + /label ... (r/o) descriptive chip name + /ngpio ... (r/o) number of GPIOs exposed by the chip This ABI is obsoleted by Documentation/ABI/testing/gpio-cdev and will be removed after 2020. diff --git a/Documentation/ABI/obsolete/sysfs-platform-ideapad-laptop b/Documentation/ABI/obsolete/sysfs-platform-ideapad-laptop new file mode 100644 index 000000000000..c1dbd19c679c --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-platform-ideapad-laptop @@ -0,0 +1,8 @@ +What: /sys/bus/platform/devices/VPC2004:*/conservation_mode +Date: Aug 2017 +KernelVersion: 4.14 +Contact: platform-driver-x86@vger.kernel.org +Description: + Controls whether the conservation mode is enabled or not. + This feature limits the maximum battery charge percentage to + around 50-60% in order to prolong the lifetime of the battery. diff --git a/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks new file mode 100644 index 000000000000..825508f42af6 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks @@ -0,0 +1,5 @@ +What: /sys/kernel/time/aux_clocks/<ID>/enable +Date: May 2025 +Contact: Thomas Gleixner <tglx@linutronix.de> +Description: + Controls the enablement of auxiliary clock timekeepers. diff --git a/Documentation/ABI/testing/sysfs-bus-acpi b/Documentation/ABI/testing/sysfs-bus-acpi index 58abacf59b2a..6f2b907a8013 100644 --- a/Documentation/ABI/testing/sysfs-bus-acpi +++ b/Documentation/ABI/testing/sysfs-bus-acpi @@ -1,6 +1,6 @@ What: /sys/bus/acpi/devices/.../path Date: December 2006 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: This attribute indicates the full path of ACPI namespace object associated with the device object. For example, @@ -12,7 +12,7 @@ Description: What: /sys/bus/acpi/devices/.../modalias Date: July 2007 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: This attribute indicates the PNP IDs of the device object. That is acpi:HHHHHHHH:[CCCCCCC:]. Where each HHHHHHHH or @@ -20,7 +20,7 @@ Description: What: /sys/bus/acpi/devices/.../hid Date: April 2005 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: This attribute indicates the hardware ID (_HID) of the device object. For example, PNP0103. @@ -29,14 +29,14 @@ Description: What: /sys/bus/acpi/devices/.../description Date: October 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: This attribute contains the output of the device object's _STR control method, if present. What: /sys/bus/acpi/devices/.../adr Date: October 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: This attribute contains the output of the device object's _ADR control method, which is present for ACPI device @@ -45,14 +45,14 @@ Description: What: /sys/bus/acpi/devices/.../uid Date: October 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: This attribute contains the output of the device object's _UID control method, if present. What: /sys/bus/acpi/devices/.../eject Date: December 2006 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: Writing 1 to this attribute will trigger hot removal of this device object. This file exists for every device @@ -60,7 +60,7 @@ Description: What: /sys/bus/acpi/devices/.../status Date: Jan, 2014 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: (RO) Returns the ACPI device status: enabled, disabled or functioning or present, if the method _STA is present. @@ -90,7 +90,7 @@ Description: What: /sys/bus/acpi/devices/.../hrv Date: Apr, 2016 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: (RO) Allows users to read the hardware version of non-PCI hardware, if the _HRV control method is present. It is mostly diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 190bfcc1e836..7e31b8cd49b3 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -141,8 +141,6 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: @@ -417,18 +415,14 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_q_offset +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset What: /sys/bus/iio/devices/iio:deviceX/in_current_offset -What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset -What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset -What: /sys/bus/iio/devices/iio:deviceX/in_current_q_offset -What: /sys/bus/iio/devices/iio:deviceX/in_current_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset @@ -456,21 +450,15 @@ Description: to the _raw output. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_current_scale -What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale -What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale -What: /sys/bus/iio/devices/iio:deviceX/in_current_i_scale What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale @@ -559,6 +547,30 @@ Description: - a small discrete set of values like "0 2 4 6 8" - a range specified as "[min step max]" +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay +KernelVersion: 6.17 +Contact: linux-iio@vger.kernel.org +Description: + Delay of start of conversion from common reference point shared + by all channels. Can be writable when used to compensate for + delay variation introduced by external filters feeding a + simultaneous sampling ADC. + + E.g., for the ad7606 ADC series, this value is intended as a + configurable time delay in seconds, to correct delay introduced + by an optional external filtering circuit. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_convdelay_available +KernelVersion: 6.16 +Contact: linux-iio@vger.kernel.org +Description: + Available values of convdelay. Maybe expressed as: + + - a range specified as "[min step max]" + + If shared across all channels, <type>_convdelay_available + is used. + What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale @@ -579,11 +591,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale -What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale -What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale What: /sys/bus/iio/devices/iio:deviceX/out_currentY_calibscale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibscale @@ -805,7 +813,11 @@ Description: all the other channels, since it involves changing the VCO fundamental output frequency. +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_phase +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_phase What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_i_phase +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_q_phase KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: @@ -1434,10 +1446,6 @@ What: /sys/.../iio:deviceX/bufferY/in_timestamp_en What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_en What: /sys/.../iio:deviceX/bufferY/in_voltageY_en What: /sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en -What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_en -What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_en -What: /sys/.../iio:deviceX/bufferY/in_voltage_i_en -What: /sys/.../iio:deviceX/bufferY/in_voltage_q_en What: /sys/.../iio:deviceX/bufferY/in_incli_x_en What: /sys/.../iio:deviceX/bufferY/in_incli_y_en What: /sys/.../iio:deviceX/bufferY/in_pressureY_en @@ -1458,10 +1466,6 @@ What: /sys/.../iio:deviceX/bufferY/in_incli_type What: /sys/.../iio:deviceX/bufferY/in_voltageY_type What: /sys/.../iio:deviceX/bufferY/in_voltage_type What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_type -What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_type -What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_type -What: /sys/.../iio:deviceX/bufferY/in_voltage_i_type -What: /sys/.../iio:deviceX/bufferY/in_voltage_q_type What: /sys/.../iio:deviceX/bufferY/in_timestamp_type What: /sys/.../iio:deviceX/bufferY/in_pressureY_type What: /sys/.../iio:deviceX/bufferY/in_pressure_type @@ -1499,10 +1503,6 @@ Description: What: /sys/.../iio:deviceX/bufferY/in_voltageY_index What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index -What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_index -What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_index -What: /sys/.../iio:deviceX/bufferY/in_voltage_i_index -What: /sys/.../iio:deviceX/bufferY/in_voltage_q_index What: /sys/.../iio:deviceX/bufferY/in_accel_x_index What: /sys/.../iio:deviceX/bufferY/in_accel_y_index What: /sys/.../iio:deviceX/bufferY/in_accel_z_index @@ -1692,8 +1692,6 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw -What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_raw -What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_raw KernelVersion: 3.17 Contact: linux-iio@vger.kernel.org Description: @@ -2278,6 +2276,9 @@ Description: Reading returns a list with the possible filter modes. Options for the attribute: + * "none" - Filter is disabled/bypassed. + * "sinc1" - The digital sinc1 filter. Fast 1st + conversion time. Poor noise performance. * "sinc3" - The digital sinc3 filter. Moderate 1st conversion time. Good noise performance. * "sinc4" - Sinc 4. Excellent noise performance. Long @@ -2293,6 +2294,8 @@ Description: * "sinc3+pf2" - Sinc3 + device specific Post Filter 2. * "sinc3+pf3" - Sinc3 + device specific Post Filter 3. * "sinc3+pf4" - Sinc3 + device specific Post Filter 4. + * "sinc5+pf1" - Sinc5 + device specific Post Filter 1. + * "sinc5+avg" - Sinc5 + averaging by 4. * "wideband" - filter with wideband low ripple passband and sharp transition band. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013 index de1e323e5d47..9cf8cd0dd2df 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013 +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013 @@ -1,10 +1,10 @@ -What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_i_calibphase +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0-altvoltage1_i_calibphase KernelVersion: Contact: linux-iio@vger.kernel.org Description: Read/write unscaled value for the Local Oscillatior path quadrature I phase shift. -What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_q_calibphase +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0-altvoltage1_q_calibphase KernelVersion: Contact: linux-iio@vger.kernel.org Description: diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index 1e7e0bb4c14e..df8ba88b9f6a 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -132,3 +132,12 @@ Description: A list of governors that support the node: - simple_ondemand + +What: /sys/class/devfreq/.../related_cpus +Date: June 2025 +Contact: Linux power management list <linux-pm@vger.kernel.org> +Description: The list of CPUs whose performance is closely related to the + frequency of this devfreq domain. + + This file is only present if a specific devfreq device is + closely associated with a subset of CPUs. diff --git a/Documentation/ABI/testing/sysfs-class-intel_pmt-features b/Documentation/ABI/testing/sysfs-class-intel_pmt-features new file mode 100644 index 000000000000..cddb30e5bdf6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-intel_pmt-features @@ -0,0 +1,134 @@ +What: /sys/class/intel_pmt/features-<PCI BDF>/ +Date: 2025-04-24 +KernelVersion: 6.16 +Contact: david.e.box@linux.intel.com +Description: + The `features-<PCI BDF>/` directory represents the "features" + capability exposed by Intel PMT (Platform Monitoring Technology) + for the given PCI device. + + Each directory corresponds to a PMT feature and contains + attributes describing the available telemetry, monitoring, or + control functionalities. + +Directory Structure: + + /sys/class/intel_pmt/features-<PCI BDF>/ + ├── accelerator_telemetry/ # Per-accelerator telemetry data + ├── crash_log/ # Contains system crash telemetry logs + ├── per_core_environment_telemetry/ # Environmental telemetry per core + ├── per_core_performance_telemetry/ # Performance telemetry per core + ├── per_rmid_energy_telemetry/ # Energy telemetry for RMIDs + ├── per_rmid_perf_telemetry/ # Performance telemetry for RMIDs + ├── tpmi_control/ # TPMI-related controls and telemetry + ├── tracing/ # PMT tracing features + └── uncore_telemetry/ # Uncore telemetry data + +Common Files (Present in all feature directories): + + caps + - Read-only + - Lists available capabilities for this feature. + + guids + - Read-only + - Lists GUIDs associated with this feature. + +Additional Attributes (Conditional Presence): + + max_command_size + - Read-only + - Present if the feature supports out-of-band MCTP access. + - Maximum supported MCTP command size for out-of-band PMT access (bytes). + + max_stream_size + - Read-only + - Present if the feature supports out-of-band MCTP access. + - Maximum supported MCTP stream size (bytes). + + min_watcher_period_ms + - Read-only + - Present if the feature supports the watcher API. + The watcher API provides a writable control interface that allows user + configuration of monitoring behavior, such as setting the sampling or + reporting interval. + - Minimum supported time period for the watcher interface (milliseconds). + + num_rmids + - Read-only + - Present if the feature supports RMID (Resource Monitoring ID) telemetry. + RMIDs are identifiers used by hardware to track and report resource usage, + such as memory bandwidth or energy consumption, on a per-logical-entity + basis (e.g., per core, thread, or process group). + - Maximum number of RMIDs tracked simultaneously. + +Example: +For a device with PCI BDF `0000:00:03.1`, the directory tree could look like: + + /sys/class/intel_pmt/features-0000:00:03.1/ + ├── accelerator_telemetry/ + │ ├── caps + │ ├── guids + │ ├── max_command_size + │ ├── max_stream_size + │ ├── min_watcher_period_ms + ├── crash_log/ + │ ├── caps + │ ├── guids + │ ├── max_command_size + │ ├── max_stream_size + ├── per_core_environment_telemetry/ + │ ├── caps + │ ├── guids + │ ├── max_command_size + │ ├── max_stream_size + │ ├── min_watcher_period_ms + ├── per_rmid_energy_telemetry/ + │ ├── caps + │ ├── guids + │ ├── max_command_size + │ ├── max_stream_size + │ ├── min_watcher_period_ms + │ ├── num_rmids + ├── tpmi_control/ + │ ├── caps + │ ├── guids + ├── tracing/ + │ ├── caps + │ ├── guids + ├── uncore_telemetry/ + │ ├── caps + │ ├── guids + │ ├── max_command_size + │ ├── max_stream_size + │ ├── min_watcher_period_ms + +Notes: + - Some attributes are only present if the corresponding feature supports + the capability (e.g., `max_command_size` for MCTP-capable features). + - Features supporting RMIDs include `num_rmids`. + - Features supporting the watcher API include `min_watcher_period_ms`. + - The `caps` file provides additional information about the functionality + of the feature. + +Example 'caps' content for the 'tracing' feature: + + /sys/class/intel_pmt/features-0000:00:03.1/ + ├── tracing/ + │ ├── caps + + telemetry Available: No + watcher Available: Yes + crashlog Available: No + streaming Available: No + threashold Available: No + window Available: No + config Available: Yes + tracing Available: No + inband Available: Yes + oob Available: Yes + secure_chan Available: No + pmt_sp Available: Yes + pmt_sp_policy Available: Yes + mailbox Available: Yes + bios_lock Available: Yes diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index d3da88b26a53..e4ec5de9a5dd 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -1,6 +1,6 @@ What: /sys/devices/.../power/ Date: January 2009 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../power directory contains attributes allowing the user space to check and modify some power @@ -8,7 +8,7 @@ Description: What: /sys/devices/.../power/wakeup Date: January 2009 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../power/wakeup attribute allows the user space to check if the device is enabled to wake up the system @@ -34,7 +34,7 @@ Description: What: /sys/devices/.../power/control Date: January 2009 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../power/control attribute allows the user space to control the run-time power management of the device. @@ -53,7 +53,7 @@ Description: What: /sys/devices/.../power/async Date: January 2009 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../async attribute allows the user space to enable or disable the device's suspend and resume callbacks to @@ -79,7 +79,7 @@ Description: What: /sys/devices/.../power/wakeup_count Date: September 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_count attribute contains the number of signaled wakeup events associated with the device. This @@ -90,7 +90,7 @@ Description: What: /sys/devices/.../power/wakeup_active_count Date: September 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_active_count attribute contains the number of times the processing of wakeup events associated with @@ -102,7 +102,7 @@ Description: What: /sys/devices/.../power/wakeup_abort_count Date: February 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_abort_count attribute contains the number of times the processing of a wakeup event associated with @@ -114,7 +114,7 @@ Description: What: /sys/devices/.../power/wakeup_expire_count Date: February 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_expire_count attribute contains the number of times a wakeup event associated with the device has @@ -126,7 +126,7 @@ Description: What: /sys/devices/.../power/wakeup_active Date: September 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_active attribute contains either 1, or 0, depending on whether or not a wakeup event associated with @@ -138,7 +138,7 @@ Description: What: /sys/devices/.../power/wakeup_total_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_total_time_ms attribute contains the total time of processing wakeup events associated with the @@ -149,7 +149,7 @@ Description: What: /sys/devices/.../power/wakeup_max_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_max_time_ms attribute contains the maximum time of processing a single wakeup event associated @@ -161,7 +161,7 @@ Description: What: /sys/devices/.../power/wakeup_last_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_last_time_ms attribute contains the value of the monotonic clock corresponding to the time of @@ -173,7 +173,7 @@ Description: What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms Date: February 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute contains the total time the device has been preventing @@ -203,7 +203,7 @@ Description: What: /sys/devices/.../power/pm_qos_resume_latency_us Date: March 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../power/pm_qos_resume_latency_us attribute contains the PM QoS resume latency limit for the given device, @@ -223,7 +223,7 @@ Description: What: /sys/devices/.../power/pm_qos_latency_tolerance_us Date: January 2014 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../power/pm_qos_latency_tolerance_us attribute contains the PM QoS active state latency tolerance limit for the @@ -248,7 +248,7 @@ Description: What: /sys/devices/.../power/pm_qos_no_power_off Date: September 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../power/pm_qos_no_power_off attribute is used for manipulating the PM QoS "no power off" flag. If @@ -263,7 +263,7 @@ Description: What: /sys/devices/.../power/runtime_status Date: April 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/devices/.../power/runtime_status attribute contains the current runtime PM status of the device, which may be diff --git a/Documentation/ABI/testing/sysfs-driver-samsung-laptop b/Documentation/ABI/testing/sysfs-driver-samsung-laptop index 28c9c040de5d..408cb0ddf4aa 100644 --- a/Documentation/ABI/testing/sysfs-driver-samsung-laptop +++ b/Documentation/ABI/testing/sysfs-driver-samsung-laptop @@ -20,17 +20,6 @@ Description: Some Samsung laptops have different "performance levels" and it's still unknown if this value even changes anything, other than making the user feel a bit better. -What: /sys/devices/platform/samsung/battery_life_extender -Date: December 1, 2011 -KernelVersion: 3.3 -Contact: Corentin Chary <corentin.chary@gmail.com> -Description: Max battery charge level can be modified, battery cycle - life can be extended by reducing the max battery charge - level. - - - 0 means normal battery mode (100% charge) - - 1 means battery life extender mode (80% charge) - What: /sys/devices/platform/samsung/usb_charge Date: December 1, 2011 KernelVersion: 3.3 diff --git a/Documentation/ABI/testing/sysfs-driver-typec-displayport b/Documentation/ABI/testing/sysfs-driver-typec-displayport index 256c87c5219a..314acd54e13e 100644 --- a/Documentation/ABI/testing/sysfs-driver-typec-displayport +++ b/Documentation/ABI/testing/sysfs-driver-typec-displayport @@ -62,3 +62,13 @@ Description: by VESA DisplayPort Alt Mode on USB Type-C Standard. - 0 when HPD’s logical state is low (HPD_Low) as defined by VESA DisplayPort Alt Mode on USB Type-C Standard. + +What: /sys/bus/typec/devices/.../displayport/irq_hpd +Date: June 2025 +Contact: RD Babiera <rdbabiera@google.com> +Description: + IRQ_HPD events are sent over the USB PD protocol in Status Update and + Attention messages. IRQ_HPD can only be asserted when HPD is high, + and is asserted when an IRQ_HPD has been issued since the last Status + Update. This is a read only node that returns the number of IRQ events + raised in the driver's lifetime. diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index f4de60c4134d..72e7c9161ce7 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -108,15 +108,15 @@ Description: number of a "General Purpose Events" (GPE). A GPE vectors to a specified handler in AML, which - can do a anything the BIOS writer wants from + can do anything the BIOS writer wants from OS context. GPE 0x12, for example, would vector to a level or edge handler called _L12 or _E12. The handler may do its business and return. - Or the handler may send send a Notify event + Or the handler may send a Notify event to a Linux device driver registered on an ACPI device, such as a battery, or a processor. - To figure out where all the SCI's are coming from, + To figure out where all the SCIs are coming from, /sys/firmware/acpi/interrupts contains a file listing every possible source, and the count of how many times it has triggered:: diff --git a/Documentation/ABI/testing/sysfs-kernel-address_bits b/Documentation/ABI/testing/sysfs-kernel-address_bits index 5d09ff84d4d6..3b72e48086aa 100644 --- a/Documentation/ABI/testing/sysfs-kernel-address_bits +++ b/Documentation/ABI/testing/sysfs-kernel-address_bits @@ -1,4 +1,4 @@ -What: /sys/kernel/address_bit +What: /sys/kernel/address_bits Date: May 2023 KernelVersion: 6.3 Contact: Thomas Weißschuh <linux@weissschuh.net> diff --git a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi index 1f1f274a6979..b4da7b2ea0ca 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi +++ b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi @@ -1,4 +1,4 @@ -What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type +What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919[-X]/dell_privacy_supported_type Date: Apr 2021 KernelVersion: 5.13 Contact: "<perry.yuan@dell.com>" @@ -29,12 +29,12 @@ Description: For example to check which privacy devices are supported:: - # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type + # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919*/dell_privacy_supported_type [Microphone Mute] [supported] [Camera Shutter] [supported] [ePrivacy Screen] [unsupported] -What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state +What: /sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919[-X]/dell_privacy_current_state Date: Apr 2021 KernelVersion: 5.13 Contact: "<perry.yuan@dell.com>" @@ -66,6 +66,6 @@ Description: For example to check all supported current privacy device states:: - # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state + # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919*/dell_privacy_current_state [Microphone] [unmuted] [Camera Shutter] [unmuted] diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop index 4989ab266682..5ec0dee9e707 100644 --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -27,15 +27,6 @@ Description: * 1 -> Switched On * 0 -> Switched Off -What: /sys/bus/platform/devices/VPC2004:*/conservation_mode -Date: Aug 2017 -KernelVersion: 4.14 -Contact: platform-driver-x86@vger.kernel.org -Description: - Controls whether the conservation mode is enabled or not. - This feature limits the maximum battery charge percentage to - around 50-60% in order to prolong the lifetime of the battery. - What: /sys/bus/platform/devices/VPC2004:*/fn_lock Date: May 2018 KernelVersion: 4.18 diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update index 02ae1e9bbfc8..7ffd1579b8f7 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update @@ -1,4 +1,4 @@ -What: /sys/bus/wmi/devices/44FADEB1-B204-40F2-8581-394BBDC1B651/firmware_update_request +What: /sys/bus/wmi/devices/44FADEB1-B204-40F2-8581-394BBDC1B651[-X]/firmware_update_request Date: April 2020 KernelVersion: 5.7 Contact: "Jithu Joseph" <jithu.joseph@intel.com> diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt index fd3a7ec79760..10ef1282c9d2 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt @@ -1,4 +1,4 @@ -What: /sys/devices/platform/<platform>/force_power +What: /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341[-X]/force_power Date: September 2017 KernelVersion: 4.15 Contact: "Mario Limonciello" <mario.limonciello@outlook.com> diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 2192478e83cf..4d8e1ad020f0 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -1,6 +1,6 @@ What: /sys/power/ Date: August 2006 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power directory will contain files that will provide a unified interface to the power management @@ -8,7 +8,7 @@ Description: What: /sys/power/state Date: November 2016 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/state file controls system sleep states. Reading from this file returns the available sleep state @@ -23,7 +23,7 @@ Description: What: /sys/power/mem_sleep Date: November 2016 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/mem_sleep file controls the operating mode of system suspend. Reading from it returns the available modes @@ -41,7 +41,7 @@ Description: What: /sys/power/disk Date: September 2006 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/disk file controls the operating mode of the suspend-to-disk mechanism. Reading from this file returns @@ -90,7 +90,7 @@ Description: What: /sys/power/image_size Date: August 2006 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/image_size file controls the size of the image created by the suspend-to-disk mechanism. It can be written a @@ -107,7 +107,7 @@ Description: What: /sys/power/pm_trace Date: August 2006 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/pm_trace file controls the code which saves the last PM event point in the RTC across reboots, so that you can @@ -156,7 +156,7 @@ Description: What: /sys/power/pm_async Date: January 2009 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/pm_async file controls the switch allowing the user space to enable or disable asynchronous suspend and resume @@ -169,7 +169,7 @@ Description: What: /sys/power/wakeup_count Date: July 2010 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/wakeup_count file allows user space to put the system into a sleep state while taking into account the @@ -184,7 +184,7 @@ Description: What: /sys/power/reserved_size Date: May 2011 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/reserved_size file allows user space to control the amount of memory reserved for allocations made by device @@ -198,7 +198,7 @@ Description: What: /sys/power/autosleep Date: April 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/autosleep file can be written one of the strings returned by reads from /sys/power/state. If that happens, a @@ -215,7 +215,7 @@ Description: What: /sys/power/wake_lock Date: February 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/wake_lock file allows user space to create wakeup source objects and activate them on demand (if one of @@ -242,7 +242,7 @@ Description: What: /sys/power/wake_unlock Date: February 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/wake_unlock file allows user space to deactivate wakeup sources created with the help of /sys/power/wake_lock. @@ -283,7 +283,7 @@ Description: What: /sys/power/pm_debug_messages Date: July 2017 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Contact: Rafael J. Wysocki <rafael@kernel.org> Description: The /sys/power/pm_debug_messages file controls the printing of debug messages from the system suspend/hiberbation diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar index 857cf12b0904..1016967a730f 100644 --- a/Documentation/ABI/testing/sysfs-secvar +++ b/Documentation/ABI/testing/sysfs-secvar @@ -22,9 +22,13 @@ Description: A string indicating which backend is in use by the firmware. and is expected to be "ibm,edk2-compat-v1". On pseries/PLPKS, this is generated by the kernel based on the - version number in the SB_VERSION variable in the keystore, and - has the form "ibm,plpks-sb-v<version>", or - "ibm,plpks-sb-unknown" if there is no SB_VERSION variable. + version number in the SB_VERSION variable in the keystore. The + version numbering in the SB_VERSION variable starts from 1. The + format string takes the form "ibm,plpks-sb-v<version>" in the + case of dynamic key management mode. If the SB_VERSION variable + does not exist (or there is an error while reading it), it takes + the form "ibm,plpks-sb-v0", indicating that the key management + mode is static. What: /sys/firmware/secvar/vars/<variable name> Date: August 2019 @@ -34,6 +38,13 @@ Description: Each secure variable is represented as a directory named as representation. The data and size can be determined by reading their respective attribute files. + Only secvars relevant to the key management mode are exposed. + Only in the dynamic key management mode should the user have + access (read and write) to the secure boot secvars db, dbx, + grubdb, grubdbx, and sbat. These secvars are not consumed in the + static key management mode. PK, trustedcadb and moduledb are the + secvars common to both static and dynamic key management modes. + What: /sys/firmware/secvar/vars/<variable_name>/size Date: August 2019 Contact: Nayna Jain <nayna@linux.ibm.com> diff --git a/Documentation/admin-guide/gpio/gpio-sim.rst b/Documentation/admin-guide/gpio/gpio-sim.rst index 35d49ccd49e0..f5135a14ef2e 100644 --- a/Documentation/admin-guide/gpio/gpio-sim.rst +++ b/Documentation/admin-guide/gpio/gpio-sim.rst @@ -50,8 +50,11 @@ the number of lines exposed by this bank. **Attribute:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY/name`` -This group represents a single line at the offset Y. The 'name' attribute -allows to set the line name as represented by the 'gpio-line-names' property. +**Attribute:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY/valid`` + +This group represents a single line at the offset Y. The ``valid`` attribute +indicates whether the line can be used as GPIO. The ``name`` attribute allows +to set the line name as represented by the 'gpio-line-names' property. **Item:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY/hog`` diff --git a/Documentation/admin-guide/hw-vuln/attack_vector_controls.rst b/Documentation/admin-guide/hw-vuln/attack_vector_controls.rst new file mode 100644 index 000000000000..b4de16f5ec44 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/attack_vector_controls.rst @@ -0,0 +1,238 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Attack Vector Controls +====================== + +Attack vector controls provide a simple method to configure only the mitigations +for CPU vulnerabilities which are relevant given the intended use of a system. +Administrators are encouraged to consider which attack vectors are relevant and +disable all others in order to recoup system performance. + +When new relevant CPU vulnerabilities are found, they will be added to these +attack vector controls so administrators will likely not need to reconfigure +their command line parameters as mitigations will continue to be correctly +applied based on the chosen attack vector controls. + +Attack Vectors +-------------- + +There are 5 sets of attack-vector mitigations currently supported by the kernel: + +#. :ref:`user_kernel` +#. :ref:`user_user` +#. :ref:`guest_host` +#. :ref:`guest_guest` +#. :ref:`smt` + +To control the enabled attack vectors, see :ref:`cmdline`. + +.. _user_kernel: + +User-to-Kernel +^^^^^^^^^^^^^^ + +The user-to-kernel attack vector involves a malicious userspace program +attempting to leak kernel data into userspace by exploiting a CPU vulnerability. +The kernel data involved might be limited to certain kernel memory, or include +all memory in the system, depending on the vulnerability exploited. + +If no untrusted userspace applications are being run, such as with single-user +systems, consider disabling user-to-kernel mitigations. + +Note that the CPU vulnerabilities mitigated by Linux have generally not been +shown to be exploitable from browser-based sandboxes. User-to-kernel +mitigations are therefore mostly relevant if unknown userspace applications may +be run by untrusted users. + +*user-to-kernel mitigations are enabled by default* + +.. _user_user: + +User-to-User +^^^^^^^^^^^^ + +The user-to-user attack vector involves a malicious userspace program attempting +to influence the behavior of another unsuspecting userspace program in order to +exfiltrate data. The vulnerability of a userspace program is based on the +program itself and the interfaces it provides. + +If no untrusted userspace applications are being run, consider disabling +user-to-user mitigations. + +Note that because the Linux kernel contains a mapping of all physical memory, +preventing a malicious userspace program from leaking data from another +userspace program requires mitigating user-to-kernel attacks as well for +complete protection. + +*user-to-user mitigations are enabled by default* + +.. _guest_host: + +Guest-to-Host +^^^^^^^^^^^^^ + +The guest-to-host attack vector involves a malicious VM attempting to leak +hypervisor data into the VM. The data involved may be limited, or may +potentially include all memory in the system, depending on the vulnerability +exploited. + +If no untrusted VMs are being run, consider disabling guest-to-host mitigations. + +*guest-to-host mitigations are enabled by default if KVM support is present* + +.. _guest_guest: + +Guest-to-Guest +^^^^^^^^^^^^^^ + +The guest-to-guest attack vector involves a malicious VM attempting to influence +the behavior of another unsuspecting VM in order to exfiltrate data. The +vulnerability of a VM is based on the code inside the VM itself and the +interfaces it provides. + +If no untrusted VMs, or only a single VM is being run, consider disabling +guest-to-guest mitigations. + +Similar to the user-to-user attack vector, preventing a malicious VM from +leaking data from another VM requires mitigating guest-to-host attacks as well +due to the Linux kernel phys map. + +*guest-to-guest mitigations are enabled by default if KVM support is present* + +.. _smt: + +Cross-Thread +^^^^^^^^^^^^ + +The cross-thread attack vector involves a malicious userspace program or +malicious VM either observing or attempting to influence the behavior of code +running on the SMT sibling thread in order to exfiltrate data. + +Many cross-thread attacks can only be mitigated if SMT is disabled, which will +result in reduced CPU core count and reduced performance. + +If cross-thread mitigations are fully enabled ('auto,nosmt'), all mitigations +for cross-thread attacks will be enabled. SMT may be disabled depending on +which vulnerabilities are present in the CPU. + +If cross-thread mitigations are partially enabled ('auto'), mitigations for +cross-thread attacks will be enabled but SMT will not be disabled. + +If cross-thread mitigations are disabled, no mitigations for cross-thread +attacks will be enabled. + +Cross-thread mitigation may not be required if core-scheduling or similar +techniques are used to prevent untrusted workloads from running on SMT siblings. + +*cross-thread mitigations default to partially enabled* + +.. _cmdline: + +Command Line Controls +--------------------- + +Attack vectors are controlled through the mitigations= command line option. The +value provided begins with a global option and then may optionally include one +or more options to disable various attack vectors. + +Format: + | ``mitigations=[global]`` + | ``mitigations=[global],[attack vectors]`` + +Global options: + +============ ============================================================= +Option Description +============ ============================================================= +'off' All attack vectors disabled. +'auto' All attack vectors enabled, partial cross-thread mitigations. +'auto,nosmt' All attack vectors enabled, full cross-thread mitigations. +============ ============================================================= + +Attack vector options: + +================= ======================================= +Option Description +================= ======================================= +'no_user_kernel' Disables user-to-kernel mitigations. +'no_user_user' Disables user-to-user mitigations. +'no_guest_host' Disables guest-to-host mitigations. +'no_guest_guest' Disables guest-to-guest mitigations +'no_cross_thread' Disables all cross-thread mitigations. +================= ======================================= + +Multiple attack vector options may be specified in a comma-separated list. If +the global option is not specified, it defaults to 'auto'. The global option +'off' is equivalent to disabling all attack vectors. + +Examples: + | ``mitigations=auto,no_user_kernel`` + + Enable all attack vectors except user-to-kernel. Partial cross-thread + mitigations. + + | ``mitigations=auto,nosmt,no_guest_host,no_guest_guest`` + + Enable all attack vectors and cross-thread mitigations except for + guest-to-host and guest-to-guest mitigations. + + | ``mitigations=,no_cross_thread`` + + Enable all attack vectors but not cross-thread mitigations. + +Interactions with command-line options +-------------------------------------- + +Vulnerability-specific controls (e.g. "retbleed=off") take precedence over all +attack vector controls. Mitigations for individual vulnerabilities may be +turned on or off via their command-line options regardless of the attack vector +controls. + +Summary of attack-vector mitigations +------------------------------------ + +When a vulnerability is mitigated due to an attack-vector control, the default +mitigation option for that particular vulnerability is used. To use a different +mitigation, please use the vulnerability-specific command line option. + +The table below summarizes which vulnerabilities are mitigated when different +attack vectors are enabled and assuming the CPU is vulnerable. + +=============== ============== ============ ============= ============== ============ ======== +Vulnerability User-to-Kernel User-to-User Guest-to-Host Guest-to-Guest Cross-Thread Notes +=============== ============== ============ ============= ============== ============ ======== +BHI X X +ITS X X +GDS X X X X * (Note 1) +L1TF X X * (Note 2) +MDS X X X X * (Note 2) +MMIO X X X X * (Note 2) +Meltdown X +Retbleed X X * (Note 3) +RFDS X X X X +Spectre_v1 X +Spectre_v2 X X +Spectre_v2_user X X * (Note 1) +SRBDS X X X X +SRSO X X +SSB (Note 4) +TAA X X X X * (Note 2) +TSA X X X X +=============== ============== ============ ============= ============== ============ ======== + +Notes: + 1 -- Can be mitigated without disabling SMT. + + 2 -- Disables SMT if cross-thread mitigations are fully enabled and the CPU + is vulnerable + + 3 -- Disables SMT if cross-thread mitigations are fully enabled, the CPU is + vulnerable, and STIBP is not supported + + 4 -- Speculative store bypass is always enabled by default (no kernel + mitigation applied) unless overridden with spec_store_bypass_disable option + +When an attack-vector is disabled, all mitigations for the vulnerabilities +listed in the above table are disabled, unless mitigation is required for a +different enabled attack-vector or a mitigation is explicitly selected via a +vulnerability-specific command line option. diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst index 09890a8f3ee9..89ca636081b7 100644 --- a/Documentation/admin-guide/hw-vuln/index.rst +++ b/Documentation/admin-guide/hw-vuln/index.rst @@ -9,6 +9,7 @@ are configurable at compile, boot or run time. .. toctree:: :maxdepth: 1 + attack_vector_controls spectre l1tf mds diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 343377538fe9..0d2ea9a60145 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2538,6 +2538,13 @@ requires the kernel to be built with CONFIG_ARM64_PSEUDO_NMI. + irqchip.riscv_imsic_noipi + [RISC-V,EARLY] + Force the kernel to not use IMSIC software injected MSIs + as IPIs. Intended for system where IMSIC is trap-n-emulated, + and thus want to reduce MMIO traps when triggering IPIs + to multiple harts. + irqfixup [HW] When an interrupt is not handled search all handlers for it. Intended to get systems with badly broken @@ -3790,6 +3797,10 @@ mmio_stale_data=full,nosmt [X86] retbleed=auto,nosmt [X86] + [X86] After one of the above options, additionally + supports attack-vector based controls as documented in + Documentation/admin-guide/hw-vuln/attack_vector_controls.rst + mminit_loglevel= [KNL,EARLY] When CONFIG_DEBUG_MEMORY_INIT is set, this parameter allows control of the logging verbosity for @@ -5000,6 +5011,18 @@ that number, otherwise (e.g., 'pmu_override=on'), MMCR1 remains 0. + pm_async= [PM] + Format: off + This parameter sets the initial value of the + /sys/power/pm_async sysfs knob at boot time. + If set to "off", disables asynchronous suspend and + resume of devices during system-wide power transitions. + This can be useful on platforms where device + dependencies are not well-defined, or for debugging + power management issues. Asynchronous operations are + enabled by default. + + pm_debug_messages [SUSPEND,KNL] Enable suspend/resume debug messages during boot up. @@ -6387,6 +6410,11 @@ sa1100ir [NET] See drivers/net/irda/sa1100_ir.c. + sched_proxy_exec= [KNL] + Enables or disables "proxy execution" style + solution to mutex-based priority inversion. + Format: <bool> + sched_verbose [KNL,EARLY] Enables verbose scheduler debug messages. schedstats= [KNL,X86] Enable or disable scheduled statistics. diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst index 412423c54f25..e1771f2225d5 100644 --- a/Documentation/admin-guide/pm/amd-pstate.rst +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -72,7 +72,7 @@ to manage each performance update behavior. :: Lowest non- | | | | linear perf ------>+-----------------------+ +-----------------------+ | | | | - | | Lowest perf ---->| | + | | Min perf ---->| | | | | | Lowest perf ------>+-----------------------+ +-----------------------+ | | | | diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst index 2d74af7f0efe..cacb9f0307dd 100644 --- a/Documentation/admin-guide/pm/cpufreq.rst +++ b/Documentation/admin-guide/pm/cpufreq.rst @@ -398,7 +398,9 @@ policy limits change after that. This governor does not do anything by itself. Instead, it allows user space to set the CPU frequency for the policy it is attached to by writing to the -``scaling_setspeed`` attribute of that policy. +``scaling_setspeed`` attribute of that policy. Though the intention may be to +set an exact frequency for the policy, the actual frequency may vary depending +on hardware coordination, thermal and power limits, and other factors. ``schedutil`` ------------- diff --git a/Documentation/admin-guide/syscall-user-dispatch.rst b/Documentation/admin-guide/syscall-user-dispatch.rst index e3cfffef5a63..c1768d9e80fa 100644 --- a/Documentation/admin-guide/syscall-user-dispatch.rst +++ b/Documentation/admin-guide/syscall-user-dispatch.rst @@ -53,20 +53,25 @@ following prctl: prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <offset>, <length>, [selector]) -<op> is either PR_SYS_DISPATCH_ON or PR_SYS_DISPATCH_OFF, to enable and -disable the mechanism globally for that thread. When -PR_SYS_DISPATCH_OFF is used, the other fields must be zero. - -[<offset>, <offset>+<length>) delimit a memory region interval -from which syscalls are always executed directly, regardless of the -userspace selector. This provides a fast path for the C library, which -includes the most common syscall dispatchers in the native code -applications, and also provides a way for the signal handler to return +<op> is either PR_SYS_DISPATCH_EXCLUSIVE_ON/PR_SYS_DISPATCH_INCLUSIVE_ON +or PR_SYS_DISPATCH_OFF, to enable and disable the mechanism globally for +that thread. When PR_SYS_DISPATCH_OFF is used, the other fields must be zero. + +For PR_SYS_DISPATCH_EXCLUSIVE_ON [<offset>, <offset>+<length>) delimit +a memory region interval from which syscalls are always executed directly, +regardless of the userspace selector. This provides a fast path for the +C library, which includes the most common syscall dispatchers in the native +code applications, and also provides a way for the signal handler to return without triggering a nested SIGSYS on (rt\_)sigreturn. Users of this interface should make sure that at least the signal trampoline code is included in this region. In addition, for syscalls that implement the trampoline code on the vDSO, that trampoline is never intercepted. +For PR_SYS_DISPATCH_INCLUSIVE_ON [<offset>, <offset>+<length>) delimit +a memory region interval from which syscalls are dispatched based on +the userspace selector. Syscalls from outside of the range are always +executed directly. + [selector] is a pointer to a char-sized region in the process memory region, that provides a quick way to enable disable syscall redirection thread-wide, without the need to invoke the kernel directly. selector diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 19224eeac1c2..c04e6b8eb2b1 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -1014,30 +1014,26 @@ perf_user_access (arm64 and riscv only) Controls user space access for reading perf event counters. -arm64 -===== - -The default value is 0 (access disabled). +* for arm64 + The default value is 0 (access disabled). -When set to 1, user space can read performance monitor counter registers -directly. + When set to 1, user space can read performance monitor counter registers + directly. -See Documentation/arch/arm64/perf.rst for more information. - -riscv -===== + See Documentation/arch/arm64/perf.rst for more information. -When set to 0, user space access is disabled. +* for riscv + When set to 0, user space access is disabled. -The default value is 1, user space can read performance monitor counter -registers through perf, any direct access without perf intervention will trigger -an illegal instruction. + The default value is 1, user space can read performance monitor counter + registers through perf, any direct access without perf intervention will trigger + an illegal instruction. -When set to 2, which enables legacy mode (user space has direct access to cycle -and insret CSRs only). Note that this legacy value is deprecated and will be -removed once all user space applications are fixed. + When set to 2, which enables legacy mode (user space has direct access to cycle + and insret CSRs only). Note that this legacy value is deprecated and will be + removed once all user space applications are fixed. -Note that the time CSR is always directly accessible to all modes. + Note that the time CSR is always directly accessible to all modes. pid_max ======= diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst index 9bef46151d53..4d71211fdad8 100644 --- a/Documentation/admin-guide/sysctl/vm.rst +++ b/Documentation/admin-guide/sysctl/vm.rst @@ -465,8 +465,8 @@ The minimum value is 1 (1/1 -> 100%). The value less than 1 completely disables protection of the pages. -max_map_count: -============== +max_map_count +============= This file contains the maximum number of memory map areas a process may have. Memory map areas are used as a side-effect of calling @@ -495,8 +495,8 @@ memory allocations. The default value depends on CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT. -memory_failure_early_kill: -========================== +memory_failure_early_kill +========================= Control how to kill processes when uncorrected memory error (typically a 2bit error in a memory module) is detected in the background by hardware diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 240fee618e06..102c693c8f81 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -358,12 +358,7 @@ Forcing power Many OEMs include a method that can be used to force the power of a Thunderbolt controller to an "On" state even if nothing is connected. If supported by your machine this will be exposed by the WMI bus with -a sysfs attribute called "force_power". - -For example the intel-wmi-thunderbolt driver exposes this attribute in: - /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power - - To force the power to on, write 1 to this attribute file. - To disable force power, write 0 to this attribute file. +a sysfs attribute called "force_power", see +Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt for details. Note: it's currently not possible to query the force power state of a platform. diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst index ee9b790c0d72..12bac2ea141c 100644 --- a/Documentation/arch/arm64/booting.rst +++ b/Documentation/arch/arm64/booting.rst @@ -388,6 +388,27 @@ Before jumping into the kernel, the following conditions must be met: - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1. + For CPUs with the Branch Record Buffer Extension (FEAT_BRBE): + + - If EL3 is present: + + - MDCR_EL3.SBRBE (bits 33:32) must be initialised to 0b01 or 0b11. + + - If the kernel is entered at EL1 and EL2 is present: + + - BRBCR_EL2.CC (bit 3) must be initialised to 0b1. + - BRBCR_EL2.MPRED (bit 4) must be initialised to 0b1. + + - HDFGRTR_EL2.nBRBDATA (bit 61) must be initialised to 0b1. + - HDFGRTR_EL2.nBRBCTL (bit 60) must be initialised to 0b1. + - HDFGRTR_EL2.nBRBIDR (bit 59) must be initialised to 0b1. + + - HDFGWTR_EL2.nBRBDATA (bit 61) must be initialised to 0b1. + - HDFGWTR_EL2.nBRBCTL (bit 60) must be initialised to 0b1. + + - HFGITR_EL2.nBRBIALL (bit 56) must be initialised to 0b1. + - HFGITR_EL2.nBRBINJ (bit 55) must be initialised to 0b1. + For CPUs with the Performance Monitors Extension (FEAT_PMUv3p9): - If EL3 is present: diff --git a/Documentation/arch/arm64/elf_hwcaps.rst b/Documentation/arch/arm64/elf_hwcaps.rst index 69d7afe56853..f58ada4d6cb2 100644 --- a/Documentation/arch/arm64/elf_hwcaps.rst +++ b/Documentation/arch/arm64/elf_hwcaps.rst @@ -435,6 +435,12 @@ HWCAP2_SME_SF8DP4 HWCAP2_POE Functionality implied by ID_AA64MMFR3_EL1.S1POE == 0b0001. +HWCAP3_MTE_FAR + Functionality implied by ID_AA64PFR2_EL1.MTEFAR == 0b0001. + +HWCAP3_MTE_STORE_ONLY + Functionality implied by ID_AA64PFR2_EL1.MTESTOREONLY == 0b0001. + 4. Unused AT_HWCAP bits ----------------------- diff --git a/Documentation/arch/arm64/tagged-pointers.rst b/Documentation/arch/arm64/tagged-pointers.rst index 81b6c2a770dd..f87a925ca9a5 100644 --- a/Documentation/arch/arm64/tagged-pointers.rst +++ b/Documentation/arch/arm64/tagged-pointers.rst @@ -60,11 +60,12 @@ that signal handlers in applications making use of tags cannot rely on the tag information for user virtual addresses being maintained in these fields unless the flag was set. -Due to architecture limitations, bits 63:60 of the fault address -are not preserved in response to synchronous tag check faults -(SEGV_MTESERR) even if SA_EXPOSE_TAGBITS was set. Applications should -treat the values of these bits as undefined in order to accommodate -future architecture revisions which may preserve the bits. +If FEAT_MTE_TAGGED_FAR (Armv8.9) is supported, bits 63:60 of the fault address +are preserved in response to synchronous tag check faults (SEGV_MTESERR) +otherwise not preserved even if SA_EXPOSE_TAGBITS was set. +Applications should interpret the values of these bits based on +the support for the HWCAP3_MTE_FAR. If the support is not present, +the values of these bits should be considered as undefined otherwise valid. For signals raised in response to watchpoint debug exceptions, the tag information will be preserved regardless of the SA_EXPOSE_TAGBITS diff --git a/Documentation/arch/x86/amd-hfi.rst b/Documentation/arch/x86/amd-hfi.rst new file mode 100644 index 000000000000..bf3d3a1985a2 --- /dev/null +++ b/Documentation/arch/x86/amd-hfi.rst @@ -0,0 +1,133 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================================================== +Hardware Feedback Interface For Hetero Core Scheduling On AMD Platform +====================================================================== + +:Copyright: 2025 Advanced Micro Devices, Inc. All Rights Reserved. + +:Author: Perry Yuan <perry.yuan@amd.com> +:Author: Mario Limonciello <mario.limonciello@amd.com> + +Overview +-------- + +AMD Heterogeneous Core implementations are comprised of more than one +architectural class and CPUs are comprised of cores of various efficiency and +power capabilities: performance-oriented *classic cores* and power-efficient +*dense cores*. As such, power management strategies must be designed to +accommodate the complexities introduced by incorporating different core types. +Heterogeneous systems can also extend to more than two architectural classes +as well. The purpose of the scheduling feedback mechanism is to provide +information to the operating system scheduler in real time such that the +scheduler can direct threads to the optimal core. + +The goal of AMD's heterogeneous architecture is to attain power benefit by +sending background threads to the dense cores while sending high priority +threads to the classic cores. From a performance perspective, sending +background threads to dense cores can free up power headroom and allow the +classic cores to optimally service demanding threads. Furthermore, the area +optimized nature of the dense cores allows for an increasing number of +physical cores. This improved core density will have positive multithreaded +performance impact. + +AMD Heterogeneous Core Driver +----------------------------- + +The ``amd_hfi`` driver delivers the operating system a performance and energy +efficiency capability data for each CPU in the system. The scheduler can use +the ranking data from the HFI driver to make task placement decisions. + +Thread Classification and Ranking Table Interaction +---------------------------------------------------- + +The thread classification is used to select into a ranking table that +describes an efficiency and performance ranking for each classification. + +Threads are classified during runtime into enumerated classes. The classes +represent thread performance/power characteristics that may benefit from +special scheduling behaviors. The below table depicts an example of thread +classification and a preference where a given thread should be scheduled +based on its thread class. The real time thread classification is consumed +by the operating system and is used to inform the scheduler of where the +thread should be placed. + +Thread Classification Example Table +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ++----------+----------------+-------------------------------+---------------------+---------+ +| class ID | Classification | Preferred scheduling behavior | Preemption priority | Counter | ++----------+----------------+-------------------------------+---------------------+---------+ +| 0 | Default | Performant | Highest | | ++----------+----------------+-------------------------------+---------------------+---------+ +| 1 | Non-scalable | Efficient | Lowest | PMCx1A1 | ++----------+----------------+-------------------------------+---------------------+---------+ +| 2 | I/O bound | Efficient | Lowest | PMCx044 | ++----------+----------------+-------------------------------+---------------------+---------+ + +Thread classification is performed by the hardware each time that the thread is switched out. +Threads that don't meet any hardware specified criteria are classified as "default". + +AMD Hardware Feedback Interface +-------------------------------- + +The Hardware Feedback Interface provides to the operating system information +about the performance and energy efficiency of each CPU in the system. Each +capability is given as a unit-less quantity in the range [0-255]. A higher +performance value indicates higher performance capability, and a higher +efficiency value indicates more efficiency. Energy efficiency and performance +are reported in separate capabilities in the shared memory based ranking table. + +These capabilities may change at runtime as a result of changes in the +operating conditions of the system or the action of external factors. +Power Management firmware is responsible for detecting events that require +a reordering of the performance and efficiency ranking. Table updates happen +relatively infrequently and occur on the time scale of seconds or more. + +The following events trigger a table update: + * Thermal Stress Events + * Silent Compute + * Extreme Low Battery Scenarios + +The kernel or a userspace policy daemon can use these capabilities to modify +task placement decisions. For instance, if either the performance or energy +capabilities of a given logical processor becomes zero, it is an indication +that the hardware recommends to the operating system to not schedule any tasks +on that processor for performance or energy efficiency reasons, respectively. + +Implementation details for Linux +-------------------------------- + +The implementation of threads scheduling consists of the following steps: + +1. A thread is spawned and scheduled to the ideal core using the default + heterogeneous scheduling policy. +2. The processor profiles thread execution and assigns an enumerated + classification ID. + This classification is communicated to the OS via logical processor + scope MSR. +3. During the thread context switch out the operating system consumes the + workload (WL) classification which resides in a logical processor scope MSR. +4. The OS triggers the hardware to clear its history by writing to an MSR, + after consuming the WL classification and before switching in the new thread. +5. If due to the classification, ranking table, and processor availability, + the thread is not on its ideal processor, the OS will then consider + scheduling the thread on its ideal processor (if available). + +Ranking Table +------------- +The ranking table is a shared memory region that is used to communicate the +performance and energy efficiency capabilities of each CPU in the system. + +The ranking table design includes rankings for each APIC ID in the system and +rankings both for performance and efficiency for each workload classification. + +.. kernel-doc:: drivers/platform/x86/amd/hfi/hfi.c + :doc: amd_shmem_info + +Ranking Table update +--------------------------- +The power management firmware issues an platform interrupt after updating the +ranking table and is ready for the operating system to consume it. CPUs receive +such interrupt and read new ranking table from shared memory which PCCT table +has provided, then ``amd_hfi`` driver parses the new table to provide new +consume data for scheduling decisions. diff --git a/Documentation/arch/x86/index.rst b/Documentation/arch/x86/index.rst index 8ea762494bcc..f88bcfceb7f2 100644 --- a/Documentation/arch/x86/index.rst +++ b/Documentation/arch/x86/index.rst @@ -28,6 +28,7 @@ x86-specific Documentation amd-debugging amd-memory-encryption amd_hsmp + amd-hfi tdx pti mds diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index 038f480074fd..066ecda1dd98 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -699,7 +699,7 @@ the template below. #include <kunit/visibility.h> #include <my_file.h> ... - MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING); + MODULE_IMPORT_NS("EXPORTED_FOR_KUNIT_TESTING"); ... // Use do_interesting_thing() in tests diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 05edf22e6c30..2a096e060ed3 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -135,6 +135,7 @@ properties: - minix,neo-u9h - nexbox,a1 - tronsmart,vega-s96 + - ugoos,am3 - videostrong,gxm-kiii-pro - wetek,core2 - const: amlogic,s912 diff --git a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml index 87128e7b7d28..f5b54b4fc55d 100644 --- a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml @@ -41,10 +41,10 @@ additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> - trbe { - compatible = "arm,trace-buffer-extension"; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - }; + trbe { + compatible = "arm,trace-buffer-extension"; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; ... diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 01333ac111fb..456dbf7b5ec8 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -87,6 +87,7 @@ properties: - facebook,greatlakes-bmc - facebook,harma-bmc - facebook,minerva-cmc + - facebook,santabarbara-bmc - facebook,yosemite4-bmc - ibm,blueridge-bmc - ibm,everest-bmc @@ -98,6 +99,7 @@ properties: - inventec,starscream-bmc - inventec,transformer-bmc - jabil,rbp-bmc + - nvidia,gb200nvl-bmc - qcom,dc-scm-v1-bmc - quanta,s6q-bmc - ufispace,ncplite-bmc diff --git a/Documentation/devicetree/bindings/arm/axiado.yaml b/Documentation/devicetree/bindings/arm/axiado.yaml new file mode 100644 index 000000000000..bfabe7b32e65 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/axiado.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/axiado.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axiado Platforms + +maintainers: + - Harshit Shah <hshah@axiado.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: AX3000 based boards + items: + - enum: + - axiado,ax3000-evk # Axiado AX3000 Evaluation Board + - const: axiado,ax3000 # Axiado AX3000 SoC + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/cix.yaml b/Documentation/devicetree/bindings/arm/cix.yaml new file mode 100644 index 000000000000..114dab4bc4d2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cix.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/cix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CIX platforms + +maintainers: + - Peter Chen <peter.chen@cixtech.com> + - Fugang Duan <fugang.duan@cixtech.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: Radxa Orion O6 + items: + - const: radxa,orion-o6 + - const: cix,sky1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 2e9ab9583005..5bd517befb68 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -200,6 +200,7 @@ properties: - qcom,kryo385 - qcom,kryo465 - qcom,kryo468 + - qcom,kryo470 - qcom,kryo485 - qcom,kryo560 - qcom,kryo570 diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt deleted file mode 100644 index 6dd6f399236d..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt +++ /dev/null @@ -1,30 +0,0 @@ -Freescale Vybrid Miscellaneous System Control - Interrupt Router - -The MSCM IP contains multiple sub modules, this binding describes the second -block of registers which control the interrupt router. The interrupt router -allows to configure the recipient of each peripheral interrupt. Furthermore -it controls the directed processor interrupts. The module is available in all -Vybrid SoC's but is only really useful in dual core configurations (VF6xx -which comes with a Cortex-A5/Cortex-M4 combination). - -Required properties: -- compatible: "fsl,vf610-mscm-ir" -- reg: the register range of the MSCM Interrupt Router -- fsl,cpucfg: The handle to the MSCM CPU configuration node, required - to get the current CPU ID -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: Two cells, interrupt number and cells. - The hardware interrupt number according to interrupt - assignment of the interrupt router is required. - Flags get passed only when using GIC as parent. Flags - encoding as documented by the GIC bindings. - -Example: - mscm_ir: interrupt-controller@40001800 { - compatible = "fsl,vf610-mscm-ir"; - reg = <0x40001800 0x400>; - fsl,cpucfg = <&mscm_cpucfg>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - } diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index d3b5e6923e41..a3e9f9e0735a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -89,6 +89,7 @@ properties: - description: i.MX28 based Boards items: - enum: + - amarula,imx28-rmm - armadeus,imx28-apf28 # APF28 SoM - bluegiga,apx4devkit # Bluegiga APx4 SoM on dev board - crystalfontz,cfa10036 # Crystalfontz CFA-10036 SoM @@ -769,6 +770,15 @@ properties: - const: dh,imx6ull-dhcor-som - const: fsl,imx6ull + - description: i.MX6ULL Engicam MicroGEA SoM based boards + items: + - enum: + - engicam,microgea-imx6ull-bmm # i.MX6ULL Engicam MicroGEA BMM Board + - engicam,microgea-imx6ull-gtw # i.MX6ULL Engicam MicroGEA GTW Board + - engicam,microgea-imx6ull-rmm # i.MX6ULL Engicam MicroGEA RMM Board + - const: engicam,microgea-imx6ull # i.MX6ULL Engicam MicroGEA SoM + - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyBOARD-Segin items: - enum: @@ -1095,6 +1105,7 @@ properties: - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board + - gocontroll,moduline-display # GOcontroll Moduline Display controller - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel @@ -1395,6 +1406,13 @@ properties: - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board - const: fsl,imx95 + - description: PHYTEC i.MX 95 FPSC based Boards + items: + - enum: + - phytec,imx95-libra-rdk-fpsc # Libra-i.MX 95 FPSC + - const: phytec,imx95-phycore-fpsc # phyCORE-i.MX 95 FPSC + - const: fsl,imx95 + - description: i.MXRT1050 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index a7e0a72f6e4c..19ed9448c9c2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -29,6 +29,11 @@ properties: - const: mediatek,mt2712 - items: - enum: + - jty,d101 + - lenovo,a369i + - const: mediatek,mt6572 + - items: + - enum: - mediatek,mt6580-evbp1 - const: mediatek,mt6580 - items: @@ -302,6 +307,10 @@ properties: - const: google,steelix-sku196608 - const: google,steelix - const: mediatek,mt8186 + - description: Google Squirtle (Acer Chromebook Spin 311 (R724T) + items: + - const: google,squirtle + - const: mediatek,mt8186 - description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001)) items: - const: google,starmie-sku0 @@ -350,9 +359,6 @@ properties: - const: mediatek,mt8186 - description: Google Voltorb (Acer Chromebook 311 C723/C732T) items: - - enum: - - google,voltorb-sku589824 - - google,voltorb-sku589825 - const: google,voltorb - const: mediatek,mt8186 - items: diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml index 4c43eaf3632e..f73bb8ec3a1a 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml @@ -35,6 +35,11 @@ properties: - enum: - dell,wyse-ariel - const: marvell,mmp3 + - description: PXA1908 based boards + items: + - enum: + - samsung,coreprimevelte + - const: marvell,pxa1908 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 56f78f0f3803..ae43b3556580 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -209,6 +209,7 @@ properties: - samsung,hlte - sony,xperia-amami - sony,xperia-honami + - sony,xperia-togari - const: qcom,msm8974 - items: @@ -232,6 +233,11 @@ properties: - items: - enum: + - longcheer,l9360 + - const: qcom,msm8976 + + - items: + - enum: - acer,a1-724 - alcatel,idol347 - asus,z00l diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 5772d905f390..28db6bd6aa5b 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -258,6 +258,11 @@ properties: - const: firefly,rk3566-roc-pc - const: rockchip,rk3566 + - description: Firefly Station M3 + items: + - const: firefly,rk3588s-roc-pc + - const: rockchip,rk3588s + - description: Firefly Station P2 items: - const: firefly,rk3568-roc-pc @@ -295,6 +300,12 @@ properties: - friendlyarm,nanopi-r4s-enterprise - const: rockchip,rk3399 + - description: FriendlyElec NanoPi M5 series boards + items: + - enum: + - friendlyarm,nanopi-m5 + - const: rockchip,rk3576 + - description: FriendlyElec NanoPi R5 series boards items: - enum: @@ -715,6 +726,13 @@ properties: - const: lckfb,tspi-rk3566 - const: rockchip,rk3566 + - description: Luckfox Core3576 Module based boards + items: + - enum: + - luckfox,omni3576 + - const: luckfox,core3576 + - const: rockchip,rk3576 + - description: Lunzn FastRhino R66S / R68S items: - enum: @@ -961,6 +979,11 @@ properties: - const: radxa,rock-s0 - const: rockchip,rk3308 + - description: Radxa ROCK 5T + items: + - const: radxa,rock-5t + - const: rockchip,rk3588 + - description: Radxa ZERO 3W/3E items: - enum: @@ -1109,6 +1132,11 @@ properties: - const: rockchip,rk3588-toybrick-x0 - const: rockchip,rk3588 + - description: Sakura Pi RK3308B + items: + - const: sakurapi,rk3308-sakurapi-rk3308b + - const: rockchip,rk3308 + - description: Sinovoip RK3308 Banana Pi P2 Pro items: - const: sinovoip,rk3308-bpi-p2pro diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml index 46c1af851be7..55b2200d6e75 100644 --- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml @@ -25,6 +25,7 @@ select: - rockchip,rk3288-pmu - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3528-pmu - rockchip,rk3562-pmu - rockchip,rk3568-pmu - rockchip,rk3576-pmu @@ -44,6 +45,7 @@ properties: - rockchip,rk3288-pmu - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3528-pmu - rockchip,rk3562-pmu - rockchip,rk3568-pmu - rockchip,rk3576-pmu diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index b3be184c7e56..26fe899badc5 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -45,6 +45,12 @@ properties: - const: samsung,aries - const: samsung,s5pv210 + - description: Exynos2200 based boards + items: + - enum: + - samsung,g0s # Samsung Galaxy S22+ (SM-S906B) + - const: samsung,exynos2200 + - description: Exynos3250 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 3e996346b264..4970b9167d1c 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -55,17 +55,17 @@ unevaluatedProperties: false examples: - | ahb { - compatible = "st,mlahb", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - dma-ranges = <0x00000000 0x38000000 0x10000>, - <0x10000000 0x10000000 0x60000>, - <0x30000000 0x30000000 0x60000>; + compatible = "st,mlahb", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dma-ranges = <0x00000000 0x38000000 0x10000>, + <0x10000000 0x10000000 0x60000>, + <0x30000000 0x30000000 0x60000>; - m4_rproc: m4@10000000 { - reg = <0x10000000 0x40000>; - }; + m4_rproc: m4@10000000 { + reg = <0x10000000 0x40000>; + }; }; ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 408532504a24..ad144c02eb7e 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -121,6 +121,7 @@ properties: - st,stm32mp157a-dk1-scmi - st,stm32mp157c-dk2 - st,stm32mp157c-dk2-scmi + - st,stm32mp157f-dk2 - const: st,stm32mp157 - items: diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 7807ea613258..c25a22fe4d25 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -341,15 +341,11 @@ properties: - const: allwinner,i12-tvbox - const: allwinner,sun7i-a20 - - description: ICnova A20 ADB4006 + - description: ICnova A20 items: - - const: incircuit,icnova-a20-adb4006 - - const: incircuit,icnova-a20 - - const: allwinner,sun7i-a20 - - - description: ICNova A20 SWAC - items: - - const: incircuit,icnova-a20-swac + - enum: + - incircuit,icnova-a20-adb4006 + - incircuit,icnova-a20-swac - const: incircuit,icnova-a20 - const: allwinner,sun7i-a20 @@ -760,21 +756,12 @@ properties: - const: pine64,pinebook - const: allwinner,sun50i-a64 - - description: Pine64 PinePhone Developer Batch (1.0) - items: - - const: pine64,pinephone-1.0 - - const: pine64,pinephone - - const: allwinner,sun50i-a64 - - - description: Pine64 PinePhone Braveheart (1.1) + - description: Pine64 PinePhone items: - - const: pine64,pinephone-1.1 - - const: pine64,pinephone - - const: allwinner,sun50i-a64 - - - description: Pine64 PinePhone (1.2) - items: - - const: pine64,pinephone-1.2 + - enum: + - pine64,pinephone-1.0 # Developer Batch (1.0) + - pine64,pinephone-1.1 # Braveheart (1.1) + - pine64,pinephone-1.2 - const: pine64,pinephone - const: allwinner,sun50i-a64 @@ -996,6 +983,11 @@ properties: - const: xunlong,orangepi-3 - const: allwinner,sun50i-h6 + - description: Xunlong OrangePi 4A + items: + - const: xunlong,orangepi-4a + - const: allwinner,sun55i-t527 + - description: Xunlong OrangePi Lite items: - const: xunlong,orangepi-lite diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 9cae3268a827..1634dab53269 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -52,6 +52,10 @@ properties: - nvidia,cardhu-a04 - const: nvidia,cardhu - const: nvidia,tegra30 + - description: ASUS Portable AiO P1801-T + items: + - const: asus,p1801-t + - const: nvidia,tegra30 - description: ASUS Transformers Device family items: - enum: @@ -61,6 +65,10 @@ properties: - asus,tf300tl - asus,tf700t - const: nvidia,tegra30 + - description: Asus VivoTab RT + items: + - const: asus,tf600t + - const: nvidia,tegra30 - description: LG Optimus 4X P880 items: - const: lg,p880 @@ -242,5 +250,10 @@ properties: - const: nvidia,p3768-0000+p3767-0005 - const: nvidia,p3767-0005 - const: nvidia,tegra234 + - description: NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform + items: + - const: nvidia,p3971-0089+p3834-0008 + - const: nvidia,p3834-0008 + - const: nvidia,tegra264 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml index ea4fbf655220..be70819020c5 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml @@ -16,6 +16,7 @@ properties: - nvidia,tegra186-pmc - nvidia,tegra194-pmc - nvidia,tegra234-pmc + - nvidia,tegra264-pmc reg: minItems: 4 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index bf6003d8fb76..e80c653fa438 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -25,6 +25,12 @@ properties: - ti,am62a7-sk - const: ti,am62a7 + - description: K3 AM62D2 SoC and Boards + items: + - enum: + - ti,am62d2-evm + - const: ti,am62d2 + - description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra items: - const: phytec,am62a7-phyboard-lyra-rdk diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml index 3603edd7361d..aa5df4692e37 100644 --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -107,6 +107,7 @@ properties: - compulab,cm-t335 - moxa,uc-8100-me-t - novatech,am335x-lxm + - seeed,am335x-bone-green-eco - ti,am335x-bone - ti,am335x-evm - ti,am3359-icev2 diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml new file mode 100644 index 000000000000..993293ebc4d3 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/fsl,imx8mp-aipstz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Secure AHB to IP Slave bus (AIPSTZ) bridge + +description: + The secure AIPS bridge (AIPSTZ) acts as a bridge for AHB masters issuing + transactions to IP Slave peripherals. Additionally, this module offers access + control configurations meant to restrict which peripherals a master can + access. + +maintainers: + - Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> + +properties: + compatible: + const: fsl,imx8mp-aipstz + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#access-controller-cells": + const: 3 + description: + First cell - consumer ID + Second cell - consumer type (master or peripheral) + Third cell - configuration value + + ranges: true + +# borrowed from simple-bus.yaml, no additional requirements for children +patternProperties: + "@(0|[1-9a-f][0-9a-f]*)$": + type: object + additionalProperties: true + properties: + reg: + items: + minItems: 2 + maxItems: 4 + minItems: 1 + maxItems: 1024 + ranges: + oneOf: + - items: + minItems: 3 + maxItems: 7 + minItems: 1 + maxItems: 1024 + - $ref: /schemas/types.yaml#/definitions/flag + anyOf: + - required: + - reg + - required: + - ranges + +required: + - compatible + - reg + - power-domains + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus@30df0000 { + compatible = "fsl,imx8mp-aipstz"; + reg = <0x30df0000 0x10000>; + ranges = <0x30c00000 0x30c00000 0x400000>; + power-domains = <&pgc_audio>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <3>; + + dma-controller@30e00000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e00000 0x10000>; + #dma-cells = <3>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml new file mode 100644 index 000000000000..477ee687520e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc8180x-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller on SC8180X + +maintainers: + - Satya Priya Kakitapalli <quic_skakitap@quicinc.com> + +description: | + Qualcomm camera clock control module provides the clocks, resets and + power domains on SC8180X. + + See also: include/dt-bindings/clock/qcom,sc8180x-camcc.h + +properties: + compatible: + const: qcom,sc8180x-camcc + + clocks: + items: + - description: Camera AHB clock from GCC + - description: Board XO source + - description: Sleep clock source + + power-domains: + maxItems: 1 + description: + A phandle and PM domain specifier for the MMCX power domain. + + required-opps: + maxItems: 1 + description: + A phandle to an OPP node describing required MMCX performance point. + +required: + - compatible + - clocks + - power-domains + - required-opps + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc8180x.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + clock-controller@ad00000 { + compatible = "qcom,sc8180x-camcc"; + reg = <0x0ad00000 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8180X_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml new file mode 100644 index 000000000000..cc4491f7ee5f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 clock generator + +maintainers: + - A. della Porta <andrea.porta@suse.com> + +description: | + The RP1 contains a clock generator designed as three PLLs (CORE, AUDIO, + VIDEO), and each PLL output can be programmed through dividers to generate + the clocks to drive the sub-peripherals embedded inside the chipset. + + Link to datasheet: + https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf + +properties: + compatible: + const: raspberrypi,rp1-clocks + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + The available clocks are defined in + include/dt-bindings/clock/raspberrypi,rp1-clocks.h. + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/raspberrypi,rp1-clocks.h> + + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + clocks@c040018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0xc0 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml index 6cc9045e5c68..a43c1c9d9113 100644 --- a/Documentation/devicetree/bindings/display/arm,pl11x.yaml +++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml @@ -78,6 +78,9 @@ properties: If not present, the memory interface is fast enough to handle all possible video modes. + resets: + maxItems: 1 + port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt deleted file mode 100644 index 63ec2a624aa9..000000000000 --- a/Documentation/devicetree/bindings/display/fsl,dcu.txt +++ /dev/null @@ -1,34 +0,0 @@ -Device Tree bindings for Freescale DCU DRM Driver - -Required properties: -- compatible: Should be one of - * "fsl,ls1021a-dcu". - * "fsl,vf610-dcu". - -- reg: Address and length of the register set for dcu. -- clocks: Handle to "dcu" and "pix" clock (in the order below) - This can be the same clock (e.g. LS1021a) - See ../clocks/clock-bindings.txt for details. -- clock-names: Should be "dcu" and "pix" - See ../clocks/clock-bindings.txt for details. -- big-endian Boolean property, LS1021A DCU registers are big-endian. -- port Video port for the panel output - -Optional properties: -- fsl,tcon: The phandle to the timing controller node. - -Examples: -dcu: dcu@2ce0000 { - compatible = "fsl,ls1021a-dcu"; - reg = <0x0 0x2ce0000 0x0 0x10000>; - clocks = <&platform_clk 0>, <&platform_clk 0>; - clock-names = "dcu", "pix"; - big-endian; - fsl,tcon = <&tcon>; - - port { - dcu_out: endpoint { - remote-endpoint = <&panel_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index 8e3a98aeec32..2dd0411ec651 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -71,12 +71,23 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: The LCDIF output port + display: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to display panel + deprecated: true + + display0: + $ref: panel/panel-common.yaml# + deprecated: true + + lcd-supply: + deprecated: true + required: - compatible - reg - clocks - interrupts - - port additionalProperties: false @@ -175,6 +186,12 @@ allOf: properties: dmas: false dma-names: false + display: false + display0: false + lcd-supply: false + + required: + - port examples: - | diff --git a/Documentation/devicetree/bindings/display/fsl,ls1021a-dcu.yaml b/Documentation/devicetree/bindings/display/fsl,ls1021a-dcu.yaml new file mode 100644 index 000000000000..72d14babe993 --- /dev/null +++ b/Documentation/devicetree/bindings/display/fsl,ls1021a-dcu.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/fsl,ls1021a-dcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale DCU DRM Driver + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - fsl,ls1021a-dcu + - fsl,vf610-dcu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: dcu + - const: pix + + big-endian: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Video port for the panel output + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + fsl,tcon: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle to the timing controller node. + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + display-controller@2ce0000 { + compatible = "fsl,ls1021a-dcu"; + reg = <0x2ce0000 0x10000>; + clocks = <&platform_clk 0>, <&platform_clk 0>; + clock-names = "dcu", "pix"; + big-endian; + fsl,tcon = <&tcon>; + + port { + endpoint { + remote-endpoint = <&panel_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/himax,hx8357.yaml b/Documentation/devicetree/bindings/display/himax,hx8357.yaml new file mode 100644 index 000000000000..34c3b89bf003 --- /dev/null +++ b/Documentation/devicetree/bindings/display/himax,hx8357.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/himax,hx8357.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Himax HX8357D display panel + +description: + Display panels using a Himax HX8357D controller in SPI + mode, such as the Adafruit 3.5" TFT for Raspberry Pi. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - adafruit,yx350hv15 + - himax,hx8357b + - const: himax,hx8357 + - items: + - enum: + - himax,hx8369a + - const: himax,hx8369 + + reg: + maxItems: 1 + + dc-gpios: + maxItems: 1 + description: D/C pin + + rotation: + enum: [0, 90, 180, 270] + + backlight: + description: + phandle of the backlight device attached to the panel + + im-gpios: + maxItems: 3 + + reset-gpios: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "adafruit,yx350hv15", "himax,hx8357"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <90>; + backlight = <&backlight>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt deleted file mode 100644 index e641f664763d..000000000000 --- a/Documentation/devicetree/bindings/display/himax,hx8357d.txt +++ /dev/null @@ -1,26 +0,0 @@ -Himax HX8357D display panels - -This binding is for display panels using a Himax HX8357D controller in SPI -mode, such as the Adafruit 3.5" TFT for Raspberry Pi. - -Required properties: -- compatible: "adafruit,yx350hv15", "himax,hx8357d" -- dc-gpios: D/C pin -- reg: address of the panel on the SPI bus - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - display@0{ - compatible = "adafruit,yx350hv15", "himax,hx8357d"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; - rotation = <90>; - backlight = <&backlight>; - }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml index 75ce92f4a5fd..274f590807ca 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml @@ -45,6 +45,9 @@ properties: '#sound-dai-cells': const: 0 + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + ports: $ref: /schemas/graph.yaml#/properties/ports properties: diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt deleted file mode 100644 index 1d0dad1210d3..000000000000 --- a/Documentation/devicetree/bindings/display/sitronix,st7586.txt +++ /dev/null @@ -1,22 +0,0 @@ -Sitronix ST7586 display panel - -Required properties: -- compatible: "lego,ev3-lcd". -- a0-gpios: The A0 signal (since this binding is for serial mode, this is - the pin labeled D1 on the controller, not the pin labeled A0) -- reset-gpios: Reset pin - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) - -Example: - display@0{ - compatible = "lego,ev3-lcd"; - reg = <0>; - spi-max-frequency = <10000000>; - a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.yaml b/Documentation/devicetree/bindings/display/sitronix,st7586.yaml new file mode 100644 index 000000000000..566aaf1aeac8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7586.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sitronix,st7586.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7586 Display Controller + +maintainers: + - David Lechner <david@lechnology.com> + +description: + Sitronix ST7586 is a driver and controller for 4-level gray + scale and monochrome dot matrix LCD panels. + https://topwaydisplay.com/sites/default/files/2020-04/ST7586S.pdf + +$ref: panel/panel-common.yaml# + +additionalProperties: false + +properties: + compatible: + const: lego,ev3-lcd + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + a0-gpios: + description: + The A0 signal (for serial mode, this is the pin labeled D1 on the + controller, not the pin labeled A0) + maxItems: 1 + + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - a0-gpios + - reset-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "lego,ev3-lcd"; + reg = <0>; + spi-max-frequency = <10000000>; + a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml index 4ebea60b8c5b..8c52fa0ea5f8 100644 --- a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml +++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml @@ -25,7 +25,7 @@ properties: maxItems: 1 clocks: - minItems: 2 + maxItems: 2 clock-names: items: diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml index bc5594d18643..300bf2252c3e 100644 --- a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml +++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml @@ -20,7 +20,7 @@ properties: maxItems: 2 clocks: - minItems: 1 + maxItems: 1 clock-names: items: diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml index a790e5687844..0dabe9bbb219 100644 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml @@ -24,6 +24,7 @@ properties: - const: nvidia,tegra186-gpcdma - items: - enum: + - nvidia,tegra264-gpcdma - nvidia,tegra234-gpcdma - nvidia,tegra194-gpcdma - const: nvidia,tegra186-gpcdma diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index b8693e4b4b0d..e610b7636a08 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -91,6 +91,9 @@ properties: - const: runstall - const: softreset + access-controllers: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml index ca8d8661f872..abc52978be7a 100644 --- a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml @@ -81,25 +81,25 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> dsp@10803000 { - compatible = "mediatek,mt8195-dsp"; - reg = <0x10803000 0x1000>, - <0x10840000 0x40000>; - reg-names = "cfg", "sram"; - clocks = <&topckgen 10>, //CLK_TOP_ADSP - <&clk26m>, - <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS - <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2 - <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP - <&topckgen 34>; //CLK_TOP_AUDIO_H - clock-names = "adsp_sel", - "clk26m_ck", - "audio_local_bus", - "mainpll_d7_d2", - "scp_adsp_audiodsp", - "audio_h"; - memory-region = <&adsp_dma_mem_reserved>, - <&adsp_mem_reserved>; - power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP - mbox-names = "rx", "tx"; - mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; + compatible = "mediatek,mt8195-dsp"; + reg = <0x10803000 0x1000>, + <0x10840000 0x40000>; + reg-names = "cfg", "sram"; + clocks = <&topckgen 10>, //CLK_TOP_ADSP + <&clk26m>, + <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS + <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2 + <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP + <&topckgen 34>; //CLK_TOP_AUDIO_H + clock-names = "adsp_sel", + "clk26m_ck", + "audio_local_bus", + "mainpll_d7_d2", + "scp_adsp_audiodsp", + "audio_h"; + memory-region = <&adsp_dma_mem_reserved>, + <&adsp_mem_reserved>; + power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP + mbox-names = "rx", "tx"; + mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>; }; diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index e6bed7d93e2d..50f1f08744a1 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -62,33 +62,33 @@ examples: #include <dt-bindings/gpio/gpio.h> npe: npe@c8006000 { - compatible = "intel,ixp4xx-network-processing-engine"; - reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; - hss@0 { - compatible = "intel,ixp4xx-hss"; - reg = <0>; - intel,npe-handle = <&npe 0>; - intel,queue-chl-rxtrig = <&qmgr 12>; - intel,queue-chl-txready = <&qmgr 34>; - intel,queue-pkt-rx = <&qmgr 13>; - intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>; - intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>; - intel,queue-pkt-txdone = <&qmgr 22>; - cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>; - clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>; - }; + hss@0 { + compatible = "intel,ixp4xx-hss"; + reg = <0>; + intel,npe-handle = <&npe 0>; + intel,queue-chl-rxtrig = <&qmgr 12>; + intel,queue-chl-txready = <&qmgr 34>; + intel,queue-pkt-rx = <&qmgr 13>; + intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>; + intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>; + intel,queue-pkt-txdone = <&qmgr 22>; + cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>; + clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>; + }; - crypto { - compatible = "intel,ixp4xx-crypto"; - intel,npe-handle = <&npe 2>; - queue-rx = <&qmgr 30>; - queue-txready = <&qmgr 29>; - }; + crypto { + compatible = "intel,ixp4xx-crypto"; + intel,npe-handle = <&npe 2>; + queue-rx = <&qmgr 30>; + queue-txready = <&qmgr 29>; + }; }; ... diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml index c43d17f6e96b..3c44fe607e12 100644 --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml @@ -70,6 +70,7 @@ properties: - enum: - nvidia,tegra194-bpmp - nvidia,tegra234-bpmp + - nvidia,tegra264-bpmp - const: nvidia,tegra186-bpmp - const: nvidia,tegra186-bpmp diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 8cdaac8011ba..b913192219e4 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -32,6 +32,7 @@ properties: - qcom,scm-ipq8074 - qcom,scm-ipq9574 - qcom,scm-mdm9607 + - qcom,scm-milos - qcom,scm-msm8226 - qcom,scm-msm8660 - qcom,scm-msm8916 @@ -198,6 +199,7 @@ allOf: compatible: contains: enum: + - qcom,scm-milos - qcom,scm-sm8450 - qcom,scm-sm8550 - qcom,scm-sm8650 diff --git a/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml b/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml index bbc183200400..3365124c7fd4 100644 --- a/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml +++ b/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml @@ -32,6 +32,13 @@ properties: items: - const: aon + resets: + maxItems: 1 + + reset-names: + items: + - const: gpu-clkgen + "#power-domain-cells": const: 1 diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml index 77554885a6c4..7d2d3b7aa4b7 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml +++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml @@ -316,6 +316,7 @@ examples: reg = <0x40000000 0x10000>; gpio-controller; #gpio-cells = <2>; + clocks = <&clk>; }; }; diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml index 80833462f620..41b368d54557 100644 --- a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml +++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml @@ -27,7 +27,7 @@ additionalProperties: false examples: - | versal_fpga: versal-fpga { - compatible = "xlnx,versal-fpga"; + compatible = "xlnx,versal-fpga"; }; ... diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt deleted file mode 100644 index 973362eb3f1e..000000000000 --- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt +++ /dev/null @@ -1,72 +0,0 @@ -GPIO controllers on MPC8xxx SoCs - -This is for the non-QE/CPM/GUTs GPIO controllers as found on -8349, 8572, 8610 and compatible. - -Every GPIO controller node must have #gpio-cells property defined, -this information will be used to translate gpio-specifiers. -See bindings/gpio/gpio.txt for details of how to specify GPIO -information for devices. - -The GPIO module usually is connected to the SoC's internal interrupt -controller, see bindings/interrupt-controller/interrupts.txt (the -interrupt client nodes section) for details how to specify this GPIO -module's interrupt. - -The GPIO module may serve as another interrupt controller (cascaded to -the SoC's internal interrupt controller). See the interrupt controller -nodes section in bindings/interrupt-controller/interrupts.txt for -details. - -Required properties: -- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio" - for 83xx, "fsl,mpc8572-gpio" for 85xx, or - "fsl,mpc8610-gpio" for 86xx. -- #gpio-cells: Should be two. The first cell is the pin number - and the second cell is used to specify optional - parameters (currently unused). -- interrupts: Interrupt mapping for GPIO IRQ. -- gpio-controller: Marks the port as GPIO controller. - -Optional properties: -- interrupt-controller: Empty boolean property which marks the GPIO - module as an IRQ controller. -- #interrupt-cells: Should be two. Defines the number of integer - cells required to specify an interrupt within - this interrupt controller. The first cell - defines the pin number, the second cell - defines additional flags (trigger type, - trigger polarity). Note that the available - set of trigger conditions supported by the - GPIO module depends on the actual SoC. - -Example of gpio-controller nodes for a MPC8347 SoC: - - gpio1: gpio-controller@c00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; - reg = <0xc00 0x100>; - interrupt-parent = <&ipic>; - interrupts = <74 0x8>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio-controller@d00 { - #gpio-cells = <2>; - compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio"; - reg = <0xd00 0x100>; - interrupt-parent = <&ipic>; - interrupts = <75 0x8>; - gpio-controller; - }; - -Example of a peripheral using the GPIO module as an IRQ controller: - - funkyfpga@0 { - compatible = "funky-fpga"; - ... - interrupt-parent = <&gpio1>; - interrupts = <4 3>; - }; diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt deleted file mode 100644 index ce19c5660aca..000000000000 --- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Abilis TB10x GPIO controller - -Required Properties: -- compatible: Should be "abilis,tb10x-gpio" -- reg: Address and length of the register set for the device -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be <2>. The first cell is the pin number and the - second cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted). -- abilis,ngpio: the number of GPIO pins this driver controls. - -Optional Properties: -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges. -- interrupts: Defines the interrupt line connecting this GPIO controller to - its parent interrupt controller. - -GPIO ranges are specified as described in -Documentation/devicetree/bindings/gpio/gpio.txt - -Example: - - gpioa: gpio@ff140000 { - compatible = "abilis,tb10x-gpio"; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&tb10x_ictl>; - interrupts = <27 2>; - reg = <0xFF140000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - abilis,ngpio = <3>; - gpio-ranges = <&iomux 0 0 0>; - gpio-ranges-group-names = "gpioa_pins"; - }; diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.yaml b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.yaml new file mode 100644 index 000000000000..c93ec0f16bcd --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/abilis,tb10x-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Abilis TB10x GPIO controller + +maintainers: + - Christian Ruppert <christian.ruppert@abilis.com> + +properties: + compatible: + const: abilis,tb10x-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: true + + gpio-ranges-group-names: true + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: Interrupts are triggered on both edges + + interrupts: + maxItems: 1 + + abilis,ngpio: + description: Number of GPIO pins this driver controls + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - abilis,ngpio + +additionalProperties: false + +examples: + - | + gpio@ff140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <27 2>; + reg = <0xff140000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioa_pins"; + }; diff --git a/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml b/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml new file mode 100644 index 000000000000..18afed324198 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/altr-pio-1.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera GPIO controller + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + - Marek Vasut <marex@denx.de> + - Mathieu Malaterre <malat@debian.org> + - Tien Hock Loh <thloh@altera.com> + +properties: + compatible: + const: altr,pio-1.0 + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: + First cell is the GPIO offset number. Second cell is reserved and + currently unused. + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + altr,ngpio: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Width of the GPIO bank. + default: 32 + + altr,interrupt-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Specifies the interrupt trigger type synthesized by hardware. + Values defined in <dt-bindings/interrupt-controller/irq.h>. + enum: [1, 2, 3, 4] + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + gpio@ff200000 { + compatible = "altr,pio-1.0"; + reg = <0xff200000 0x10>; + interrupts = <45 4>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + altr,ngpio = <32>; + altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>; + }; diff --git a/Documentation/devicetree/bindings/gpio/apm,xgene-gpio-sb.yaml b/Documentation/devicetree/bindings/gpio/apm,xgene-gpio-sb.yaml new file mode 100644 index 000000000000..d205dd7b492c --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/apm,xgene-gpio-sb.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/apm,xgene-gpio-sb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene Standby GPIO controller + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +description: | + This is a gpio controller in the standby domain. It also supports interrupt in + some particular pins which are sourced to its parent interrupt controller + as diagram below: + +-----------------+ + | X-Gene standby | + | GPIO controller +------ GPIO_0 + +------------+ | | ... + | Parent IRQ | EXT_INT_0 | +------ GPIO_8/EXT_INT_0 + | controller | (SPI40) | | ... + | (GICv2) +--------------+ +------ GPIO_[N+8]/EXT_INT_N + | | ... | | + | | EXT_INT_N | +------ GPIO_[N+9] + | | (SPI[40 + N])| | ... + | +--------------+ +------ GPIO_MAX + +------------+ +-----------------+ + +properties: + compatible: + const: apm,xgene-gpio-sb + + reg: + maxItems: 1 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + interrupts: + description: + List of interrupt specifiers for EXT_INT_0 through EXT_INT_N. The first + entry must correspond to EXT_INT_0. + + '#interrupt-cells': + const: 2 + description: + First cell selects EXT_INT_N (0-N), second cell specifies flags + + interrupt-controller: true + + apm,nr-gpios: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of GPIO pins + + apm,nr-irqs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of interrupt pins + + apm,irq-start: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Lowest GPIO pin supporting interrupts + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + - interrupts + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false + +examples: + - | + gpio@17001000 { + compatible = "apm,xgene-gpio-sb"; + reg = <0x17001000 0x400>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <0x0 0x28 0x1>, + <0x0 0x29 0x1>, + <0x0 0x2a 0x1>, + <0x0 0x2b 0x1>, + <0x0 0x2c 0x1>, + <0x0 0x2d 0x1>; + #interrupt-cells = <2>; + interrupt-controller; + apm,nr-gpios = <22>; + apm,nr-irqs = <6>; + apm,irq-start = <8>; + }; diff --git a/Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml b/Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml new file mode 100644 index 000000000000..42b1bc0a10c9 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/apple,smc-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Mac System Management Controller GPIO + +maintainers: + - Sven Peter <sven@kernel.org> + +description: + Apple Mac System Management Controller GPIO block. + +properties: + compatible: + const: apple,smc-gpio + + gpio-controller: true + + '#gpio-cells': + const: 2 + +required: + - compatible + - gpio-controller + - '#gpio-cells' + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/gpio/cavium,octeon-3860-gpio.yaml b/Documentation/devicetree/bindings/gpio/cavium,octeon-3860-gpio.yaml new file mode 100644 index 000000000000..35155b900655 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/cavium,octeon-3860-gpio.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cavium,octeon-3860-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cavium Octeon 3860 GPIO controller + +maintainers: + - Bartosz Golaszewski <brgl@bgdev.pl> + +properties: + compatible: + const: cavium,octeon-3860-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 16 + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + gpio@1070000000800 { + compatible = "cavium,octeon-3860-gpio"; + reg = <0x10700 0x00000800 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + /* The GPIO pin connect to 16 consecutive CUI bits */ + interrupts = <0 16>, <0 17>, <0 18>, <0 19>, + <0 20>, <0 21>, <0 22>, <0 23>, + <0 24>, <0 25>, <0 26>, <0 27>, + <0 28>, <0 29>, <0 30>, <0 31>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt deleted file mode 100644 index 9d6dcd3fe7f9..000000000000 --- a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt +++ /dev/null @@ -1,49 +0,0 @@ -* General Purpose Input Output (GPIO) bus. - -Properties: -- compatible: "cavium,octeon-3860-gpio" - - Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. - -- reg: The base address of the GPIO unit's register bank. - -- gpio-controller: This is a GPIO controller. - -- #gpio-cells: Must be <2>. The first cell is the GPIO pin. - -- interrupt-controller: The GPIO controller is also an interrupt - controller, many of its pins may be configured as an interrupt - source. - -- #interrupt-cells: Must be <2>. The first cell is the GPIO pin - connected to the interrupt source. The second cell is the interrupt - triggering protocol and may have one of four values: - 1 - edge triggered on the rising edge. - 2 - edge triggered on the falling edge - 4 - level triggered active high. - 8 - level triggered active low. - -- interrupts: Interrupt routing for each pin. - -Example: - - gpio-controller@1070000000800 { - #gpio-cells = <2>; - compatible = "cavium,octeon-3860-gpio"; - reg = <0x10700 0x00000800 0x0 0x100>; - gpio-controller; - /* Interrupts are specified by two parts: - * 1) GPIO pin number (0..15) - * 2) Triggering (1 - edge rising - * 2 - edge falling - * 4 - level active high - * 8 - level active low) - */ - interrupt-controller; - #interrupt-cells = <2>; - /* The GPIO pin connect to 16 consecutive CUI bits */ - interrupts = <0 16>, <0 17>, <0 18>, <0 19>, - <0 20>, <0 21>, <0 22>, <0 23>, - <0 24>, <0 25>, <0 26>, <0 27>, - <0 28>, <0 29>, <0 30>, <0 31>; - }; diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt deleted file mode 100644 index 706ef00f5c64..000000000000 --- a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt +++ /dev/null @@ -1,43 +0,0 @@ -Cadence GPIO controller bindings - -Required properties: -- compatible: should be "cdns,gpio-r1p02". -- reg: the register base address and size. -- #gpio-cells: should be 2. - * first cell is the GPIO number. - * second cell specifies the GPIO flags, as defined in - <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH - and GPIO_ACTIVE_LOW flags are supported. -- gpio-controller: marks the device as a GPIO controller. -- clocks: should contain one entry referencing the peripheral clock driving - the GPIO controller. - -Optional properties: -- ngpios: integer number of gpio lines supported by this controller, up to 32. -- interrupts: interrupt specifier for the controllers interrupt. -- interrupt-controller: marks the device as an interrupt controller. When - defined, interrupts, interrupt-parent and #interrupt-cells - are required. -- interrupt-cells: should be 2. - * first cell is the GPIO number you want to use as an IRQ source. - * second cell specifies the IRQ type, as defined in - <dt-bindings/interrupt-controller/irq.h>. - Currently only level sensitive IRQs are supported. - - -Example: - gpio0: gpio-controller@fd060000 { - compatible = "cdns,gpio-r1p02"; - reg =<0xfd060000 0x1000>; - - clocks = <&gpio_clk>; - - interrupt-parent = <&gic>; - interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml new file mode 100644 index 000000000000..a84d60b39459 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/cdns,gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence GPIO Controller + +maintainers: + - Jan Kotas <jank@cadence.com> + +properties: + compatible: + oneOf: + - const: cdns,gpio-r1p02 + - items: + - enum: + - axiado,ax3000-gpio + - const: cdns,gpio-r1p02 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + ngpios: + minimum: 1 + maximum: 32 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + - First cell is the GPIO line number. + - Second cell is flags as defined in <dt-bindings/gpio/gpio.h>, + only GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW supported. + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: | + - First cell is the GPIO line number used as IRQ. + - Second cell is the trigger type, as defined in + <dt-bindings/interrupt-controller/irq.h>. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - gpio-controller + - "#gpio-cells" + +if: + required: [interrupt-controller] +then: + required: + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + gpio0: gpio-controller@fd060000 { + compatible = "cdns,gpio-r1p02"; + reg = <0xfd060000 0x1000>; + clocks = <&gpio_clk>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt deleted file mode 100644 index fd42e7280f72..000000000000 --- a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt +++ /dev/null @@ -1,17 +0,0 @@ -* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs - -Required properties: -- compatible: Should contain "cirrus,ep7209-mctrl-gpio". -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = Active high, - 1 = Active low. - -Example: - sysgpio: sysgpio { - compatible = "cirrus,ep7312-mctrl-gpio", - "cirrus,ep7209-mctrl-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml new file mode 100644 index 000000000000..bdffca817f1b --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/cirrus,clps711x-mctrl-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs + +maintainers: + - Alexander Shiyan <shc_work@mail.ru> + +properties: + compatible: + oneOf: + - items: + - const: cirrus,ep7312-mctrl-gpio + - const: cirrus,ep7209-mctrl-gpio + - const: cirrus,ep7209-mctrl-gpio + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio,syscon-dev: + description: + Phandle and offset of device's specific registers within the syscon state + control registers + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon + - description: register offset within state control registers + +required: + - compatible + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + sysgpio: sysgpio { + compatible = "cirrus,ep7312-mctrl-gpio", + "cirrus,ep7209-mctrl-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml b/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml new file mode 100644 index 000000000000..053134faf475 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/exar,xra1403.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: XRA1403 16-bit GPIO Expander with Reset Input + +maintainers: + - Nandor Han <nandor.han@ge.com> + +description: > + The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features + available: + + - Individually programmable inputs: + - Internal pull-up resistors + - Polarity inversion + - Individual interrupt enable + - Rising edge and/or Falling edge interrupt + - Input filter + - Individually programmable outputs: + - Output Level Control + - Output Three-State Control + +properties: + compatible: + const: exar,xra1403 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + reset-gpios: + description: Control line for the device reset. + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + gpio@2 { + compatible = "exar,xra1403"; + reg = <2>; + spi-max-frequency = <1000000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml b/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml deleted file mode 100644 index b74fa81e7d05..000000000000 --- a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml +++ /dev/null @@ -1,59 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/fcs,fxl6408.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Fairchild FXL6408 I2C GPIO Expander - -maintainers: - - Emanuele Ghidoli <emanuele.ghidoli@toradex.com> - -properties: - compatible: - enum: - - fcs,fxl6408 - - reg: - maxItems: 1 - - "#gpio-cells": - const: 2 - - gpio-controller: true - - gpio-line-names: - minItems: 1 - maxItems: 8 - -patternProperties: - "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": - type: object - required: - - gpio-hog - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - gpio_expander_43: gpio-expander@43 { - compatible = "fcs,fxl6408"; - reg = <0x43>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "Wi-Fi_W_DISABLE", "Wi-Fi_WKUP_WLAN", - "PWR_EN_+V3.3_WiFi_N", "PCIe_REF_CLK_EN", - "USB_RESET_N", "USB_BYPASS_N", "Wi-Fi_PDn", - "Wi-Fi_WKUP_BT"; - }; - }; diff --git a/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml index f1b60ab3f356..4cb2a6b9fabf 100644 --- a/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml @@ -29,6 +29,13 @@ properties: - fsl,ls1088a-gpio - fsl,ls2080a-gpio - const: fsl,qoriq-gpio + - items: + - enum: + - fsl,mpc8308-gpio + - fsl,mpc8377-gpio + - fsl,mpc8378-gpio + - fsl,mpc8379-gpio + - const: fsl,mpc8349-gpio reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt deleted file mode 100644 index d543fd1b8b23..000000000000 --- a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt +++ /dev/null @@ -1,19 +0,0 @@ -Gateworks PLD GPIO controller bindings - -The GPIO controller should be a child node on an I2C bus. - -Required properties: -- compatible: Should be "gateworks,pld-gpio" -- reg: I2C slave address -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be <2>. The first cell is the gpio number and - the second cell is used to specify optional parameters. - -Example: - -pld@56 { - compatible = "gateworks,pld-gpio"; - reg = <0x56>; - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt b/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt deleted file mode 100644 index 7bb1a9d60133..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt +++ /dev/null @@ -1,30 +0,0 @@ -* 74XX MMIO GPIO driver - -Required properties: -- compatible: Should contain one of the following: - "ti,741g125": for 741G125 (1-bit Input), - "ti,741g174": for 741G74 (1-bit Output), - "ti,742g125": for 742G125 (2-bit Input), - "ti,7474" : for 7474 (2-bit Output), - "ti,74125" : for 74125 (4-bit Input), - "ti,74175" : for 74175 (4-bit Output), - "ti,74365" : for 74365 (6-bit Input), - "ti,74174" : for 74174 (6-bit Output), - "ti,74244" : for 74244 (8-bit Input), - "ti,74273" : for 74273 (8-bit Output), - "ti,741624" : for 741624 (16-bit Input), - "ti,7416374": for 7416374 (16-bit Output). -- reg: Physical base address and length where IC resides. -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify the GPIO polarity: - 0 = Active High, - 1 = Active Low. - -Example: - ctrl: gpio@30008004 { - compatible = "ti,74174"; - reg = <0x30008004 0x1>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt deleted file mode 100644 index 2a80e272cd66..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt +++ /dev/null @@ -1,44 +0,0 @@ -Altera GPIO controller bindings - -Required properties: -- compatible: - - "altr,pio-1.0" -- reg: Physical base address and length of the controller's registers. -- #gpio-cells : Should be 2 - - The first cell is the gpio offset number. - - The second cell is reserved and is currently unused. -- gpio-controller : Marks the device node as a GPIO controller. -- interrupt-controller: Mark the device node as an interrupt controller -- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware. - - The first cell is the GPIO offset number within the GPIO controller. - - The second cell is the interrupt trigger type and level flags. -- interrupts: Specify the interrupt. -- altr,interrupt-type: Specifies the interrupt trigger type the GPIO - hardware is synthesized. This field is required if the Altera GPIO controller - used has IRQ enabled as the interrupt type is not software controlled, - but hardware synthesized. Required if GPIO is used as an interrupt - controller. The value is defined in <dt-bindings/interrupt-controller/irq.h> - Only the following flags are supported: - IRQ_TYPE_EDGE_RISING - IRQ_TYPE_EDGE_FALLING - IRQ_TYPE_EDGE_BOTH - IRQ_TYPE_LEVEL_HIGH - -Optional properties: -- altr,ngpio: Width of the GPIO bank. This defines how many pins the - GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not - specified. - -Example: - -gpio_altr: gpio@ff200000 { - compatible = "altr,pio-1.0"; - reg = <0xff200000 0x10>; - interrupts = <0 45 4>; - altr,ngpio = <32>; - altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt deleted file mode 100644 index cf71f3ec969d..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt +++ /dev/null @@ -1,37 +0,0 @@ -Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller - -Required properties: -- compatible: has to be "qca,<soctype>-gpio" and one of the following - fallbacks: - - "qca,ar7100-gpio" - - "qca,ar9340-gpio" -- reg: Base address and size of the controllers memory area -- gpio-controller : Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters. -- ngpios: Should be set to the number of GPIOs available on the SoC. - -Optional properties: -- interrupts: Interrupt specifier for the controllers interrupt. -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode interrupt - source, should be 2 - -Please refer to interrupts.txt in this directory for details of the common -Interrupt Controllers bindings used by client devices. - -Example: - - gpio@18040000 { - compatible = "qca,ar9132-gpio", "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <22>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt deleted file mode 100644 index 0a304ad29d81..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt +++ /dev/null @@ -1,28 +0,0 @@ -Cirrus Logic CLPS711X GPIO controller - -Required properties: -- compatible: Should be "cirrus,ep7209-gpio" -- reg: Physical base GPIO controller registers location and length. - There should be two registers, first is DATA register, the second - is DIRECTION. -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - -Note: Each GPIO port should have an alias correctly numbered in "aliases" -node. - -Example: - -aliases { - gpio0 = &porta; -}; - -porta: gpio@80000000 { - compatible = "cirrus,ep7312-gpio","cirrus,ep7209-gpio"; - reg = <0x80000000 0x1>, <0x80000040 0x1>; - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt deleted file mode 100644 index 0423699d74c7..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt +++ /dev/null @@ -1,39 +0,0 @@ -Keystone 2 DSP GPIO controller bindings - -HOST OS userland running on ARM can send interrupts to DSP cores using -the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core. -This is one of the component used by the IPC mechanism used on Keystone SOCs. - -For example TCI6638K2K SoC has 8 DSP GPIO controllers: - - 8 for C66x CorePacx CPUs 0-7 - -Keystone 2 DSP GPIO controller has specific features: -- each GPIO can be configured only as output pin; -- setting GPIO value to 1 causes IRQ generation on target DSP core; -- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still - pending. - -Required Properties: -- compatible: should be "ti,keystone-dsp-gpio" -- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to - access device state control registers and the offset of device's specific - registers within device state control registers range. -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be 2. - -Please refer to gpio.txt in this directory for details of the common GPIO -bindings used by client devices. - -Example: - dspgpio0: keystone_dsp_gpio@2620240 { - compatible = "ti,keystone-dsp-gpio"; - ti,syscon-dev = <&devctrl 0x240>; - gpio-controller; - #gpio-cells = <2>; - }; - - dsp0: dsp0 { - compatible = "linux,rproc-user"; - ... - kick-gpio = <&dspgpio0 27>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt deleted file mode 100644 index 80fcb7d70e13..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt +++ /dev/null @@ -1,37 +0,0 @@ -TI/National Semiconductor LP3943 GPIO controller - -Required properties: - - compatible: "ti,lp3943-gpio" - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be 2. See gpio.txt in this directory for a - description of the cells format. - -Example: -Simple LED controls with LP3943 GPIO controller - -&i2c4 { - lp3943@60 { - compatible = "ti,lp3943"; - reg = <0x60>; - - gpioex: gpio { - compatible = "ti,lp3943-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - }; -}; - -leds { - compatible = "gpio-leds"; - indicator1 { - label = "indi1"; - gpios = <&gpioex 9 GPIO_ACTIVE_LOW>; - }; - - indicator2 { - label = "indi2"; - gpios = <&gpioex 10 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt deleted file mode 100644 index b3a6444b8f45..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt +++ /dev/null @@ -1,59 +0,0 @@ -GPIO driver for Maxim MAX3191x industrial serializer - -Required properties: - - compatible: Must be one of: - "maxim,max31910" - "maxim,max31911" - "maxim,max31912" - "maxim,max31913" - "maxim,max31953" - "maxim,max31963" - - reg: Chip select number. - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be two. For consumer use see gpio.txt. - -Optional properties: - - #daisy-chained-devices: - Number of chips in the daisy-chain (default is 1). - - maxim,modesel-gpios: GPIO pins to configure modesel of each chip. - The number of GPIOs must equal "#daisy-chained-devices" - (if each chip is driven by a separate pin) or 1 - (if all chips are wired to the same pin). - - maxim,fault-gpios: GPIO pins to read fault of each chip. - The number of GPIOs must equal "#daisy-chained-devices" - or 1. - - maxim,db0-gpios: GPIO pins to configure debounce of each chip. - The number of GPIOs must equal "#daisy-chained-devices" - or 1. - - maxim,db1-gpios: GPIO pins to configure debounce of each chip. - The number of GPIOs must equal "maxim,db0-gpios". - - maxim,modesel-8bit: Boolean whether the modesel pin of the chips is - pulled high (8-bit mode). Use this if the modesel pin - is hardwired and consequently "maxim,modesel-gpios" - cannot be specified. By default if neither this nor - "maxim,modesel-gpios" is given, the driver assumes - that modesel is pulled low (16-bit mode). - - maxim,ignore-undervoltage: - Boolean whether to ignore undervoltage alarms signaled - by the "maxim,fault-gpios" or by the status byte - (in 16-bit mode). Use this if the chips are powered - through 5VOUT instead of VCC24V, in which case they - will constantly signal undervoltage. - -For other required and optional properties of SPI slave nodes please refer to -../spi/spi-bus.txt. - -Example: - gpio@0 { - compatible = "maxim,max31913"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - - maxim,modesel-gpios = <&gpio2 23>; - maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; - maxim,db0-gpios = <&gpio2 25>; - maxim,db1-gpios = <&gpio2 26>; - - spi-max-frequency = <25000000>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt deleted file mode 100644 index 410e716fd3d2..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt +++ /dev/null @@ -1,25 +0,0 @@ -GPIO driver for MAX77620 Power management IC from Maxim Semiconductor. - -Device has 8 GPIO pins which can be configured as GPIO as well as the -special IO functions. - -Required properties: -------------------- -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -For more details, please refer generic GPIO DT binding document -<devicetree/bindings/gpio/gpio.txt>. - -Example: --------- -#include <dt-bindings/mfd/max77620.h> -... -max77620@3c { - compatible = "maxim,max77620"; - - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt deleted file mode 100644 index f93d51478d5a..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt +++ /dev/null @@ -1,38 +0,0 @@ -Lantiq SoC External Bus memory mapped GPIO controller - -By attaching hardware latches to the EBU it is possible to create output -only gpios. This driver configures a special memory address, which when -written to outputs 16 bit to the latches. - -The node describing the memory mapped GPIOs needs to be a child of the node -describing the "lantiq,localbus". - -Required properties: -- compatible : Should be "lantiq,gpio-mm-lantiq" -- reg : Address and length of the register set for the device -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters (currently - unused). -- gpio-controller : Marks the device node as a gpio controller. - -Optional properties: -- lantiq,shadow : The default value that we shall assume as already set on the - shift register cascade. - -Example: - -localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - - gpio_mm0: gpio@4000000 { - compatible = "lantiq,gpio-mm"; - reg = <1 0x0 0x10>; - gpio-controller; - #gpio-cells = <2>; - lantiq,shadow = <0x77f> - }; -} diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt deleted file mode 100644 index 410759de9f09..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt +++ /dev/null @@ -1,18 +0,0 @@ -Turris Mox Moxtet GPIO expander via Moxtet bus - -Required properties: - - compatible : Should be "cznic,moxtet-gpio". - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Other properties are required for a Moxtet bus device, please refer to -Documentation/devicetree/bindings/bus/moxtet.txt. - -Example: - - moxtet_sfp: gpio@0 { - compatible = "cznic,moxtet-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0>; - } diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt deleted file mode 100644 index 08b5b52a3ae0..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt +++ /dev/null @@ -1,27 +0,0 @@ -Palmas GPIO controller bindings - -Required properties: -- compatible: - - "ti,palams-gpio" for palma series of the GPIO controller - - "ti,tps80036-gpio" for Palma series device TPS80036. - - "ti,tps65913-gpio" for palma series device TPS65913. - - "ti,tps65914-gpio" for palma series device TPS65914. -- #gpio-cells : Should be two. - - first cell is the gpio pin number - - second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- gpio-controller : Marks the device node as a GPIO controller. - -Note: This gpio node will be sub node of palmas node. - -Example: - palmas: tps65913@58 { - ::::::::::: - palmas_gpio: palmas_gpio { - compatible = "ti,palmas-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - ::::::::::: - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml deleted file mode 100644 index 6f73961001b7..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml +++ /dev/null @@ -1,56 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/gpio-pca9570.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: PCA9570 I2C GPO expander - -maintainers: - - Sungbo Eo <mans0n@gorani.run> - -properties: - compatible: - enum: - - dlg,slg7xl45106 - - nxp,pca9570 - - nxp,pca9571 - - reg: - maxItems: 1 - - gpio-controller: true - - '#gpio-cells': - const: 2 - - gpio-line-names: - minItems: 4 - maxItems: 8 - - label: - description: A descriptive name for this device. - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - gpio@24 { - compatible = "nxp,pca9570"; - reg = <0x24>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index 4d3f52f8d1b8..12134c737ad8 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -68,6 +68,7 @@ properties: - ti,pca9536 - ti,tca6408 - ti,tca6416 + - ti,tca6418 - ti,tca6424 - ti,tca9535 - ti,tca9538 diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt deleted file mode 100644 index fba3c61f6a5b..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt +++ /dev/null @@ -1,34 +0,0 @@ -Generic Parallel-in/Serial-out Shift Register GPIO Driver - -This binding describes generic parallel-in/serial-out shift register -devices that can be used for GPI (General Purpose Input). This includes -SN74165 serial-out shift registers and the SN65HVS88x series of -industrial serializers. - -Required properties: - - compatible : Should be "pisosr-gpio". - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Optional properties: - - ngpios : Number of used GPIO lines (0..n-1), default is 8. - - load-gpios : GPIO pin specifier attached to load enable, this - pin is pulsed before reading from the device to - load input pin values into the device. - -For other required and optional properties of SPI slave -nodes please refer to ../spi/spi-bus.txt. - -Example: - - gpio@0 { - compatible = "ti,sn65hvs882", "pisosr-gpio"; - gpio-controller; - #gpio-cells = <2>; - - load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpol; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml deleted file mode 100644 index 157969bc4c46..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml +++ /dev/null @@ -1,51 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: TPIC2810 GPIO controller - -maintainers: - - Aswath Govindraju <a-govindraju@ti.com> - -properties: - compatible: - enum: - - ti,tpic2810 - - reg: - maxItems: 1 - - gpio-controller: true - - "#gpio-cells": - const: 2 - - gpio-line-names: - minItems: 1 - maxItems: 32 - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - #include <dt-bindings/gpio/gpio.h> - - i2c { - #address-cells = <1>; - #size-cells = <0>; - gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "LED A", "LED B", "LED C"; - }; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt deleted file mode 100644 index 92ea9c8f6399..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt +++ /dev/null @@ -1,20 +0,0 @@ -* TS-4800 FPGA's GPIO controller bindings - -Required properties: -- compatible: Must be "technologic,ts4800-gpio". -- #gpio-cells: Should be two. The first cell is the pin number. -- reg: Physical base address of the controller and length - of memory mapped region. - -Optional property: -- ngpios: See "gpio.txt" - -Example: - -gpio1: gpio { - compatible = "technologic,ts4800-gpio"; - reg = <0x10020 0x6>; - ngpios = <8>; - gpio-controller; - #gpio-cells = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt deleted file mode 100644 index 3f8e71b1ab2a..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Technologic Systems I2C-FPGA's GPIO controller bindings - -This bindings describes the GPIO controller for Technologic's FPGA core. -TS-4900's FPGA encodes the GPIO state on 3 bits, whereas the TS-7970's FPGA -uses 2 bits: it doesn't use a dedicated input bit. - -Required properties: -- compatible: Should be one of the following - "technologic,ts4900-gpio" - "technologic,ts7970-gpio" -- reg: Physical base address of the controller and length - of memory mapped region. -- #gpio-cells: Should be two. The first cell is the pin number. -- gpio-controller: Marks the device node as a gpio controller. - -Optional property: -- ngpios: Number of GPIOs this controller is instantiated with, - the default is 32. See gpio.txt for more details. - -Example: - -&i2c2 { - gpio8: gpio@28 { - compatible = "technologic,ts4900-gpio"; - reg = <0x28>; - #gpio-cells = <2>; - gpio-controller; - ngpios = <32>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt deleted file mode 100644 index 66788fda1db3..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ /dev/null @@ -1,29 +0,0 @@ -twl4030 GPIO controller bindings - -Required properties: -- compatible: - - "ti,twl4030-gpio" for twl4030 GPIO controller -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. -- #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller - The first cell is the GPIO number. - The second cell is not used. -- ti,use-leds : Enables LEDA and LEDB outputs if set -- ti,debounce : if n-th bit is set, debounces GPIO-n -- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) -- ti,pullups : if n-th bit is set, set a pullup on GPIO-n -- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n - -Example: - -twl_gpio: gpio { - compatible = "ti,twl4030-gpio"; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - ti,use-leds; -}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt deleted file mode 100644 index 7ddf292db144..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt +++ /dev/null @@ -1,64 +0,0 @@ -APM X-Gene Standby GPIO controller bindings - -This is a gpio controller in the standby domain. It also supports interrupt in -some particular pins which are sourced to its parent interrupt controller -as diagram below: - +-----------------+ - | X-Gene standby | - | GPIO controller +------ GPIO_0 -+------------+ | | ... -| Parent IRQ | EXT_INT_0 | +------ GPIO_8/EXT_INT_0 -| controller | (SPI40) | | ... -| (GICv2) +--------------+ +------ GPIO_[N+8]/EXT_INT_N -| | ... | | -| | EXT_INT_N | +------ GPIO_[N+9] -| | (SPI[40 + N])| | ... -| +--------------+ +------ GPIO_MAX -+------------+ +-----------------+ - -Required properties: -- compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller -- reg: Physical base address and size of the controller's registers -- #gpio-cells: Should be two. - - first cell is the pin number - - second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- gpio-controller: Marks the device node as a GPIO controller. -- interrupts: The EXT_INT_0 parent interrupt resource must be listed first. -- interrupt-cells: Should be two. - - first cell is 0-N corresponding for EXT_INT_0 to EXT_INT_N. - - second cell is used to specify flags. -- interrupt-controller: Marks the device node as an interrupt controller. -- apm,nr-gpios: Optional, specify number of gpios pin. -- apm,nr-irqs: Optional, specify number of interrupt pins. -- apm,irq-start: Optional, specify lowest gpio pin support interrupt. - -Example: - sbgpio: gpio@17001000{ - compatible = "apm,xgene-gpio-sb"; - reg = <0x0 0x17001000 0x0 0x400>; - #gpio-cells = <2>; - gpio-controller; - interrupts = <0x0 0x28 0x1>, - <0x0 0x29 0x1>, - <0x0 0x2a 0x1>, - <0x0 0x2b 0x1>, - <0x0 0x2c 0x1>, - <0x0 0x2d 0x1>; - interrupt-parent = <&gic>; - #interrupt-cells = <2>; - interrupt-controller; - apm,nr-gpios = <22>; - apm,nr-irqs = <6>; - apm,irq-start = <8>; - }; - - testuser { - compatible = "example,testuser"; - /* Use the GPIO_13/EXT_INT_5 line as an active high triggered - * level interrupt - */ - interrupts = <5 4>; - interrupt-parent = <&sbgpio>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt deleted file mode 100644 index 86dbb05e7758..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt +++ /dev/null @@ -1,22 +0,0 @@ -APM X-Gene SoC GPIO controller bindings - -This is a gpio controller that is part of the flash controller. -This gpio controller controls a total of 48 gpios. - -Required properties: -- compatible: "apm,xgene-gpio" for X-Gene GPIO controller -- reg: Physical base address and size of the controller's registers -- #gpio-cells: Should be two. - - first cell is the pin number - - second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- gpio-controller: Marks the device node as a GPIO controller. - -Example: - gpio0: gpio0@1701c000 { - compatible = "apm,xgene-gpio"; - reg = <0x0 0x1701c000 0x0 0x40>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt b/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt deleted file mode 100644 index e13cc399b363..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt +++ /dev/null @@ -1,46 +0,0 @@ -GPIO Driver for XRA1403 16-BIT GPIO Expander With Reset Input from EXAR - -The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features available: - - Individually programmable inputs: - - Internal pull-up resistors - - Polarity inversion - - Individual interrupt enable - - Rising edge and/or Falling edge interrupt - - Input filter - - Individually programmable outputs - - Output Level Control - - Output Three-State Control - -Properties ----------- -Check documentation for SPI and GPIO controllers regarding properties needed to configure the node. - - - compatible = "exar,xra1403". - - reg - SPI id of the device. - - gpio-controller - marks the node as gpio. - - #gpio-cells - should be two where the first cell is the pin number - and the second one is used for optional parameters. - -Optional properties: -------------------- - - reset-gpios: in case available used to control the device reset line. - - interrupt-controller - marks the node as interrupt controller. - - #interrupt-cells - should be two and represents the number of cells - needed to encode interrupt source. - -Example --------- - - gpioxra0: gpio@2 { - compatible = "exar,xra1403"; - reg = <2>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; - spi-max-frequency = <1000000>; - }; diff --git a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt deleted file mode 100644 index d58b3958f3ea..000000000000 --- a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt +++ /dev/null @@ -1,24 +0,0 @@ -* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs - -All GPIOs are pin-shared with other functions. DCRs control whether a -particular pin that has GPIO capabilities acts as a GPIO or is used for -another purpose. GPIO outputs are separately programmable to emulate -an open-drain driver. - -Required properties: - - compatible: must be "ibm,ppc4xx-gpio" - - reg: address and length of the register set for the device - - #gpio-cells: must be set to 2. The first cell is the pin number - and the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: marks the device node as a gpio controller. - -Example: - -GPIO0: gpio@ef600b00 { - compatible = "ibm,ppc4xx-gpio"; - reg = <0xef600b00 0x00000048>; - #gpio-cells = <2>; - gpio-controller; -}; diff --git a/Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml b/Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml new file mode 100644 index 000000000000..42021ee14125 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/lacie,netxbig-gpio-ext.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NetxBig GPIO extension bus + +maintainers: + - Simon Guinot <simon.guinot@sequanux.org> + +description: > + GPIO extension bus found on some LaCie/Seagate boards + (Example: 2Big/5Big Network v2, 2Big NAS). + +properties: + compatible: + items: + - const: lacie,netxbig-gpio-ext + + addr-gpios: + description: GPIOs representing the address register (LSB->MSB). + items: + - description: bit 0 (LSB) + - description: bit 1 + - description: bit 2 (MSB) + + data-gpios: + description: GPIOs representing the data register (LSB->MSB). + items: + - description: bit 0 (LSB) + - description: bit 1 + - description: bit 2 (MSB) + + enable-gpio: + description: Latches the new configuration (address, data) on raising edge. + maxItems: 1 + +required: + - compatible + - addr-gpios + - data-gpios + - enable-gpio + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + gpio { + compatible = "lacie,netxbig-gpio-ext"; + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH + &gpio1 16 GPIO_ACTIVE_HIGH + &gpio1 17 GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH + &gpio1 14 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml b/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml new file mode 100644 index 000000000000..eaf53a89542a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/lantiq,gpio-mm-lantiq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq SoC External Bus memory mapped GPIO controller + +maintainers: + - John Crispin <john@phrozen.org> + +description: | + By attaching hardware latches to the EBU it is possible to create output + only gpios. This driver configures a special memory address, which when + written to outputs 16 bit to the latches. + + The node describing the memory mapped GPIOs needs to be a child of the node + describing the "lantiq,localbus". + +properties: + compatible: + enum: + - lantiq,gpio-mm-lantiq + - lantiq,gpio-mm + + reg: + maxItems: 1 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + lantiq,shadow: + description: The default value that we shall assume as already set on the shift register cascade. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + +additionalProperties: false + +examples: + - | + gpio@4000000 { + compatible = "lantiq,gpio-mm-lantiq"; + reg = <0x4000000 0x10>; + gpio-controller; + #gpio-cells = <2>; + lantiq,shadow = <0x77f>; + }; diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml deleted file mode 100644 index 1a472c05697c..000000000000 --- a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/loongson,ls1x-gpio.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Loongson-1 GPIO controller - -maintainers: - - Keguang Zhang <keguang.zhang@gmail.com> - -properties: - compatible: - const: loongson,ls1x-gpio - - reg: - maxItems: 1 - - gpio-controller: true - - "#gpio-cells": - const: 2 - - ngpios: - minimum: 1 - maximum: 32 - -required: - - compatible - - reg - - gpio-controller - - "#gpio-cells" - - ngpios - -additionalProperties: false - -examples: - - | - gpio0: gpio@1fd010c0 { - compatible = "loongson,ls1x-gpio"; - reg = <0x1fd010c0 0x4>; - - gpio-controller; - #gpio-cells = <2>; - - ngpios = <32>; - }; - -... diff --git a/Documentation/devicetree/bindings/gpio/maxim,max31910.yaml b/Documentation/devicetree/bindings/gpio/maxim,max31910.yaml new file mode 100644 index 000000000000..82a190a715f9 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/maxim,max31910.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/maxim,max31910.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX3191x GPIO serializer + +maintainers: + - Lukas Wunner <lukas@wunner.de> + +properties: + compatible: + enum: + - maxim,max31910 + - maxim,max31911 + - maxim,max31912 + - maxim,max31913 + - maxim,max31953 + - maxim,max31963 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + '#daisy-chained-devices': + description: Number of chips in the daisy-chain. + default: 1 + + maxim,modesel-gpios: + description: + GPIO pins to configure modesel of each chip. The number of GPIOs must + equal "#daisy-chained-devices" (if each chip is driven by a separate pin) + or 1 (if all chips are wired to the same pin). + + maxim,fault-gpios: + description: + GPIO pins to read fault of each chip. The number of GPIOs must equal + "#daisy-chained-devices" or 1. + + maxim,db0-gpios: + description: + GPIO pins to configure debounce of each chip. The number of GPIOs must + equal "#daisy-chained-devices" or 1. + + maxim,db1-gpios: + description: + GPIO pins to configure debounce of each chip. The number of GPIOs must + equal "maxim,db0-gpios". + + maxim,modesel-8bit: + description: + Boolean whether the modesel pin of the chips is pulled high (8-bit mode). + Use this if the modesel pin is hardwired and consequently + "maxim,modesel-gpios" cannot be specified. By default if neither this nor + "maxim,modesel-gpios" is given, the driver assumes that modesel is pulled + low (16-bit mode). + type: boolean + + maxim,ignore-undervoltage: + description: + Boolean whether to ignore undervoltage alarms signaled by the + "maxim,fault-gpios" or by the status byte (in 16-bit mode). Use this if + the chips are powered through 5VOUT instead of VCC24V, in which case they + will constantly signal undervoltage. + type: boolean + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + gpio@0 { + compatible = "maxim,max31913"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + + maxim,modesel-gpios = <&gpio2 23>; + maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + maxim,db0-gpios = <&gpio2 25>; + maxim,db1-gpios = <&gpio2 26>; + + spi-max-frequency = <25000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt deleted file mode 100644 index dd031fc93b55..000000000000 --- a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Microchip PIC32 GPIO devices (PIO). - -Required properties: - - compatible: "microchip,pic32mzda-gpio" - - reg: Base address and length for the device. - - interrupts: The port interrupt shared by all pins. - - gpio-controller: Marks the port as GPIO controller. - - #gpio-cells: Two. The first cell is the pin number and - the second cell is used to specify the gpio polarity as defined in - defined in <dt-bindings/gpio/gpio.h>: - 0 = GPIO_ACTIVE_HIGH - 1 = GPIO_ACTIVE_LOW - 2 = GPIO_OPEN_DRAIN - - interrupt-controller: Marks the device node as an interrupt controller. - - #interrupt-cells: Two. The first cell is the GPIO number and second cell - is used to specify the trigger type as defined in - <dt-bindings/interrupt-controller/irq.h>: - IRQ_TYPE_EDGE_RISING - IRQ_TYPE_EDGE_FALLING - IRQ_TYPE_EDGE_BOTH - - clocks: Clock specifier (see clock bindings for details). - - microchip,gpio-bank: Specifies which bank a controller owns. - - gpio-ranges: Interaction with the PINCTRL subsystem. - -Example: - -/* PORTA */ -gpio0: gpio0@1f860000 { - compatible = "microchip,pic32mzda-gpio"; - reg = <0x1f860000 0x100>; - interrupts = <118 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&rootclk PB4CLK>; - microchip,gpio-bank = <0>; - gpio-ranges = <&pic32_pinctrl 0 0 16>; -}; - -keys { - ... - - button@sw1 { - label = "ESC"; - linux,code = <1>; - gpios = <&gpio0 12 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/microchip,pic32mzda-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,pic32mzda-gpio.yaml new file mode 100644 index 000000000000..d8d932c86697 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/microchip,pic32mzda-gpio.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/microchip,pic32mzda-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIC32 GPIO controller + +maintainers: + - Joshua Henderson <joshua.henderson@microchip.com> + - Purna Chandra Mandal <purna.mandal@microchip.com> + +properties: + compatible: + const: microchip,pic32mzda-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + gpio-ranges: true + + "#gpio-cells": + const: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + clocks: + maxItems: 1 + + microchip,gpio-bank: + description: Bank index owned by the controller + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - gpio-controller + - gpio-ranges + - "#gpio-cells" + - interrupts + - interrupt-controller + - "#interrupt-cells" + - clocks + - microchip,gpio-bank + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + gpio@1f860000 { + compatible = "microchip,pic32mzda-gpio"; + reg = <0x1f860000 0x100>; + interrupts = <118 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&rootclk 11>; + microchip,gpio-bank = <0>; + gpio-ranges = <&pic32_pinctrl 0 0 16>; + }; diff --git a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt deleted file mode 100644 index 50ec2e690701..000000000000 --- a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt +++ /dev/null @@ -1,22 +0,0 @@ -Binding for the GPIO extension bus found on some LaCie/Seagate boards -(Example: 2Big/5Big Network v2, 2Big NAS). - -Required properties: -- compatible: "lacie,netxbig-gpio-ext". -- addr-gpios: GPIOs representing the address register (LSB -> MSB). -- data-gpios: GPIOs representing the data register (LSB -> MSB). -- enable-gpio: latches the new configuration (address, data) on raising edge. - -Example: - -netxbig_gpio_ext: netxbig-gpio-ext { - compatible = "lacie,netxbig-gpio-ext"; - - addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH - &gpio1 16 GPIO_ACTIVE_HIGH - &gpio1 17 GPIO_ACTIVE_HIGH>; - data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH - &gpio1 13 GPIO_ACTIVE_HIGH - &gpio1 14 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt deleted file mode 100644 index df63da46309c..000000000000 --- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt +++ /dev/null @@ -1,26 +0,0 @@ -Nintendo Wii (Hollywood) GPIO controller - -Required properties: -- compatible: "nintendo,hollywood-gpio" -- reg: Physical base address and length of the controller's registers. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be <2>. The first cell is the pin number and the - second cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted). - -Optional properties: -- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- interrupts: Interrupt specifier for the controller's Broadway (PowerPC) - interrupt. - -Example: - - GPIO: gpio@d8000c0 { - #gpio-cells = <2>; - compatible = "nintendo,hollywood-gpio"; - reg = <0x0d8000c0 0x40>; - gpio-controller; - ngpios = <24>; - } diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt deleted file mode 100644 index 627efc78ecf2..000000000000 --- a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt +++ /dev/null @@ -1,59 +0,0 @@ -NXP LPC18xx/43xx GPIO controller Device Tree Bindings ------------------------------------------------------ - -Required properties: -- compatible : Should be "nxp,lpc1850-gpio" -- reg : List of addresses and lengths of the GPIO controller - register sets -- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and - "gpio-gpoup1-ic" -- clocks : Phandle and clock specifier pair for GPIO controller -- resets : Phandle and reset specifier pair for GPIO controller -- gpio-controller : Marks the device node as a GPIO controller -- #gpio-cells : Should be two: - - The first cell is the GPIO line number - - The second cell is used to specify polarity -- interrupt-controller : Marks the device node as an interrupt controller -- #interrupt-cells : Should be two: - - The first cell is an interrupt number within - 0..9 range, for GPIO pin interrupts it is equal - to 'nxp,gpio-pin-interrupt' property value of - GPIO pin configuration, 8 is for GPIO GROUP0 - interrupt, 9 is for GPIO GROUP1 interrupt - - The second cell is used to specify interrupt type - -Optional properties: -- gpio-ranges : Mapping between GPIO and pinctrl - -Example: -#define LPC_GPIO(port, pin) (port * 32 + pin) -#define LPC_PIN(port, pin) (0x##port * 32 + pin) - -gpio: gpio@400f4000 { - compatible = "nxp,lpc1850-gpio"; - reg = <0x400f4000 0x4000>, <0x40087000 0x1000>, - <0x40088000 0x1000>, <0x40089000 0x1000>; - reg-names = "gpio", "gpio-pin-ic", - "gpio-group0-ic", "gpio-gpoup1-ic"; - clocks = <&ccu1 CLK_CPU_GPIO>; - resets = <&rgu 28>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, - ... - <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; -}; - -gpio_joystick { - compatible = "gpio-keys"; - ... - - button0 { - ... - interrupt-parent = <&gpio>; - interrupts = <1 IRQ_TYPE_EDGE_BOTH>; - gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; - }; -}; diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.yaml b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.yaml new file mode 100644 index 000000000000..0ef5f90f69ff --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/nxp,lpc1850-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC18xx/43xx GPIO controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc1850-gpio + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + items: + - const: gpio + - const: gpio-pin-ic + - const: gpio-group0-ic + - const: gpio-gpoup1-ic + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: | + - The first cell is an interrupt number within + 0..9 range, for GPIO pin interrupts it is equal + to 'nxp,gpio-pin-interrupt' property value of + GPIO pin configuration, 8 is for GPIO GROUP0 + interrupt, 9 is for GPIO GROUP1 interrupt + - The second cell is used to specify interrupt type + + gpio-ranges: true + +required: + - compatible + - reg + - clocks + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + + gpio@400f4000 { + compatible = "nxp,lpc1850-gpio"; + reg = <0x400f4000 0x4000>, <0x40087000 0x1000>, + <0x40088000 0x1000>, <0x40089000 0x1000>; + reg-names = "gpio", "gpio-pin-ic", "gpio-group0-ic", "gpio-gpoup1-ic"; + clocks = <&ccu1 CLK_CPU_GPIO>; + resets = <&rgu 28>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + diff --git a/Documentation/devicetree/bindings/gpio/pisosr-gpio.yaml b/Documentation/devicetree/bindings/gpio/pisosr-gpio.yaml new file mode 100644 index 000000000000..db98ba413fb6 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/pisosr-gpio.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/pisosr-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Parallel-in/Serial-out Shift Register GPIO Driver + +description: + This binding describes generic parallel-in/serial-out shift register + devices that can be used for GPI (General Purpose Input). This includes + SN74165 serial-out shift registers and the SN65HVS88x series of + industrial serializers. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - pisosr-gpio + + gpio-controller: true + + '#gpio-cells': + const: 2 + + ngpios: + maximum: 32 + default: 8 + + load-gpios: + description: + GPIO pin specifier attached to load enable, this + pin is pulsed before reading from the device to + load input pin values into the device. + + spi-cpol: true + +required: + - compatible + - gpio-controller + - '#gpio-cells' + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + gpio@0 { + compatible = "pisosr-gpio"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + spi-max-frequency = <1000000>; + spi-cpol; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml index bd35cbf7fa09..c51e10680c0a 100644 --- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml @@ -60,9 +60,6 @@ properties: required: - compatible - reg - - interrupts - - interrupt-controller - - "#interrupt-cells" - clocks - "#gpio-cells" - gpio-controller diff --git a/Documentation/devicetree/bindings/gpio/qca,ar7100-gpio.yaml b/Documentation/devicetree/bindings/gpio/qca,ar7100-gpio.yaml new file mode 100644 index 000000000000..519c4c2158f7 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/qca,ar7100-gpio.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/qca,ar7100-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR7xxx/AR9xxx GPIO controller + +maintainers: + - Alban Bedel <albeu@free.fr> + +properties: + compatible: + oneOf: + - items: + - const: qca,ar9132-gpio + - const: qca,ar7100-gpio + - enum: + - qca,ar7100-gpio + - qca,ar9340-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + ngpios: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - ngpios + +additionalProperties: false + +examples: + - | + gpio@18040000 { + compatible = "qca,ar9132-gpio", "qca,ar7100-gpio"; + reg = <0x18040000 0x30>; + interrupts = <2>; + ngpios = <22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml index d76987ce8e50..bdd83f42615c 100644 --- a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml @@ -41,6 +41,9 @@ properties: "#interrupt-cells": const: 2 + power-domains: + maxItems: 1 + patternProperties: "^.+-hog(-[0-9]+)?$": type: object diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml deleted file mode 100644 index d8cce73ea0ae..000000000000 --- a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml +++ /dev/null @@ -1,50 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Rockchip RK3328 General Register Files GPIO controller - -description: - The Rockchip RK3328 General Register File (GRF) outputs only the - GPIO_MUTE pin, originally for codec mute control, but it can also be used - for general purpose. It is manipulated by the GRF_SOC_CON10 register. - If needed in the future support for the HDMI pins can also be added. - The GPIO node should be declared as the child of the GRF node. - - The GPIO_MUTE pin is referred to in the format - - <&grf_gpio 0 GPIO_ACTIVE_LOW> - - The first cell is the pin number and - the second cell is used to specify the GPIO polarity - 0 = Active high - 1 = Active low - -maintainers: - - Heiko Stuebner <heiko@sntech.de> - -properties: - compatible: - const: rockchip,rk3328-grf-gpio - - gpio-controller: true - - "#gpio-cells": - const: 2 - -required: - - compatible - - gpio-controller - - "#gpio-cells" - -additionalProperties: false - -examples: - - | - grf_gpio: gpio { - compatible = "rockchip,rk3328-grf-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt deleted file mode 100644 index 1b30812b015b..000000000000 --- a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt +++ /dev/null @@ -1,21 +0,0 @@ -Synopsys GPIO via CREG (Control REGisters) driver - -Required properties: -- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x". -- reg : Exactly one register range with length 0x4. -- #gpio-cells : Since the generic GPIO binding is used, the - amount of cells must be specified as 2. The first cell is the - pin number, the second cell is used to specify optional parameters: - See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. -- gpio-controller : Marks the device node as a GPIO controller. -- ngpios: Number of GPIO pins. - -Example: - -gpio: gpio@f00014b0 { - compatible = "snps,creg-gpio-hsdk"; - reg = <0xf00014b0 0x4>; - gpio-controller; - #gpio-cells = <2>; - ngpios = <2>; -}; diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt deleted file mode 100644 index dd04d96e6ff1..000000000000 --- a/Documentation/devicetree/bindings/gpio/spear_spics.txt +++ /dev/null @@ -1,49 +0,0 @@ -=== ST Microelectronics SPEAr SPI CS Driver === - -SPEAr platform provides a provision to control chipselects of ARM PL022 Prime -Cell spi controller through its system registers, which otherwise remains under -PL022 control. If chipselect remain under PL022 control then they would be -released as soon as transfer is over and TxFIFO becomes empty. This is not -desired by some of the device protocols above spi which expect (multiple) -transfers without releasing their chipselects. - -Chipselects can be controlled by software by turning them as GPIOs. SPEAr -provides another interface through system registers through which software can -directly control each PL022 chipselect. Hence, it is natural for SPEAr to export -the control of this interface as gpio. - -Required properties: - - * compatible: should be defined as "st,spear-spics-gpio" - * reg: mentioning address range of spics controller - * st-spics,peripcfg-reg: peripheral configuration register offset - * st-spics,sw-enable-bit: bit offset to enable sw control - * st-spics,cs-value-bit: bit offset to drive chipselect low or high - * st-spics,cs-enable-mask: chip select number bit mask - * st-spics,cs-enable-shift: chip select number program offset - * gpio-controller: Marks the device node as gpio controller - * #gpio-cells: should be 1 and will mention chip select number - -All the above bit offsets are within peripcfg register. - -Example: -------- -spics: spics@e0700000{ - compatible = "st,spear-spics-gpio"; - reg = <0xe0700000 0x1000>; - st-spics,peripcfg-reg = <0x3b0>; - st-spics,sw-enable-bit = <12>; - st-spics,cs-value-bit = <11>; - st-spics,cs-enable-mask = <3>; - st-spics,cs-enable-shift = <8>; - gpio-controller; - #gpio-cells = <2>; -}; - - -spi0: spi@e0100000 { - num-cs = <3>; - cs-gpios = <&gpio1 7 0>, <&spics 0>, - <&spics 1>; - ... -} diff --git a/Documentation/devicetree/bindings/gpio/st,spear-spics-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,spear-spics-gpio.yaml new file mode 100644 index 000000000000..3b0d2112da79 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/st,spear-spics-gpio.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/st,spear-spics-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST Microelectronics SPEAr SPI CS GPIO Controller + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + +description: > + SPEAr platform provides a provision to control chipselects of ARM PL022 Prime + Cell spi controller through its system registers, which otherwise remains + under PL022 control. If chipselect remain under PL022 control then they would + be released as soon as transfer is over and TxFIFO becomes empty. This is not + desired by some of the device protocols above spi which expect (multiple) + transfers without releasing their chipselects. + + Chipselects can be controlled by software by turning them as GPIOs. SPEAr + provides another interface through system registers through which software can + directly control each PL022 chipselect. Hence, it is natural for SPEAr to + export the control of this interface as gpio. + +properties: + compatible: + const: st,spear-spics-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + st-spics,peripcfg-reg: + description: Offset of the peripcfg register. + $ref: /schemas/types.yaml#/definitions/uint32 + + st-spics,sw-enable-bit: + description: Bit offset to enable software chipselect control. + $ref: /schemas/types.yaml#/definitions/uint32 + + st-spics,cs-value-bit: + description: Bit offset to drive chipselect low or high. + $ref: /schemas/types.yaml#/definitions/uint32 + + st-spics,cs-enable-mask: + description: Bitmask selecting which chipselects to enable. + $ref: /schemas/types.yaml#/definitions/uint32 + + st-spics,cs-enable-shift: + description: Bit shift for programming chipselect number. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - st-spics,peripcfg-reg + - st-spics,sw-enable-bit + - st-spics,cs-value-bit + - st-spics,cs-enable-mask + - st-spics,cs-enable-shift + +additionalProperties: false + +examples: + - | + gpio@e0700000 { + compatible = "st,spear-spics-gpio"; + reg = <0xe0700000 0x1000>; + st-spics,peripcfg-reg = <0x3b0>; + st-spics,sw-enable-bit = <12>; + st-spics,cs-value-bit = <11>; + st-spics,cs-enable-mask = <3>; + st-spics,cs-enable-shift = <8>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/ti,keystone-dsp-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,keystone-dsp-gpio.yaml new file mode 100644 index 000000000000..59f81621408b --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ti,keystone-dsp-gpio.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/ti,keystone-dsp-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Keystone 2 DSP GPIO controller + +maintainers: + - Grygorii Strashko <grygorii.strashko@ti.com> + +description: | + HOST OS userland running on ARM can send interrupts to DSP cores using + the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core. + This is one of the component used by the IPC mechanism used on Keystone SOCs. + + For example TCI6638K2K SoC has 8 DSP GPIO controllers: + - 8 for C66x CorePacx CPUs 0-7 + + Keystone 2 DSP GPIO controller has specific features: + - each GPIO can be configured only as output pin; + - setting GPIO value to 1 causes IRQ generation on target DSP core; + - reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still + pending. + +properties: + compatible: + const: ti,keystone-dsp-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio,syscon-dev: + description: + Phandle and offset of device's specific registers within the syscon state + control registers + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon + - description: register offset within state control registers + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio,syscon-dev + +additionalProperties: false + +examples: + - | + gpio@240 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x240 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; diff --git a/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml new file mode 100644 index 000000000000..5e3e199fd9a4 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ti,twl4030-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TWL4030 GPIO controller + +maintainers: + - Aaro Koskinen <aaro.koskinen@iki.fi> + - Andreas Kemnade <andreas@kemnade.info> + - Kevin Hilman <khilman@baylibre.com> + - Roger Quadros <rogerq@kernel.org> + - Tony Lindgren <tony@atomide.com> + +properties: + compatible: + const: ti,twl4030-gpio + + '#gpio-cells': + const: 2 + + gpio-controller: true + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + ti,debounce: + description: Debounce control bits. Each bit corresponds to a GPIO pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,mmc-cd: + description: MMC card detect control bits. Each bit corresponds to a GPIO pin for VMMC(n+1). + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,pullups: + description: Pull-up control bits. Each bit corresponds to a GPIO pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,pulldowns: + description: Pull-down control bits. Each bit corresponds to a GPIO pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,use-leds: + type: boolean + description: Enables LEDA and LEDB outputs if set + +additionalProperties: false + +examples: + - | + gpio { + compatible = "ti,twl4030-gpio"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <1>; + interrupt-controller; + ti,use-leds; + }; diff --git a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml new file mode 100644 index 000000000000..0299d4a25086 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/trivial-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial 2-cell GPIO controllers + +maintainers: + - Bartosz Golaszewski <brgl@bgdev.pl> + +properties: + compatible: + oneOf: + - items: + - enum: + - cirrus,ep7312-gpio + - const: cirrus,ep7209-gpio + - enum: + - apm,xgene-gpio + - cirrus,ep7209-gpio + - cznic,moxtet-gpio + - dlg,slg7xl45106 + - fcs,fxl6408 + - gateworks,pld-gpio + - ibm,ppc4xx-gpio + - loongson,ls1x-gpio + - maxim,max77620 + - nintendo,hollywood-gpio + - nxp,pca9570 + - nxp,pca9571 + - rockchip,rk3328-grf-gpio + - snps,creg-gpio-hsdk + - technologic,ts4800-gpio + - technologic,ts4900-gpio + - technologic,ts7970-gpio + - ti,741g125 # for 741G125 (1-bit Input), + - ti,741g174 # for 741G74 (1-bit Output), + - ti,742g125 # for 742G125 (2-bit Input), + - ti,7474 # for 7474 (2-bit Output), + - ti,74125 # for 74125 (4-bit Input), + - ti,74175 # for 74175 (4-bit Output), + - ti,74365 # for 74365 (6-bit Input), + - ti,74174 # for 74174 (6-bit Output), + - ti,74244 # for 74244 (8-bit Input), + - ti,74273 # for 74273 (8-bit Output), + - ti,741624 # for 741624 (16-bit Input), + - ti,7416374 # for 7416374 (16-bit Output). + - ti,lp3943-gpio + - ti,palmas-gpio + - ti,tpic2810 + - ti,tps80036-gpio + - ti,tps65913-gpio + - ti,tps65914-gpio + + reg: + maxItems: 1 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + gpio-line-names: true + + ngpios: true + + # Don't add more properties + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + required: + - gpio-hog + +required: + - compatible + - '#gpio-cells' + - gpio-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - maxim,max77620 + - rockchip,rk3328-grf-gpio + - ti,lp3943-gpio + - ti,palmas-gpio + - ti,tps80036-gpio + - ti,tps65913-gpio + - ti,tps65914-gpio + then: + properties: + reg: false + else: + required: + - reg + +additionalProperties: false + +examples: + - | + gpio@1701c000 { + compatible = "apm,xgene-gpio"; + reg = <0x1701c000 0x40>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml index 8fbf12ca067e..7af4eb2d1858 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml @@ -117,6 +117,7 @@ properties: required: - reg - compatible + - clocks - gpio-controller - "#gpio-cells" diff --git a/Documentation/devicetree/bindings/gpu/apple,agx.yaml b/Documentation/devicetree/bindings/gpu/apple,agx.yaml new file mode 100644 index 000000000000..51629b3833b0 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/apple,agx.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/apple,agx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoC GPU + +maintainers: + - Sasha Finkelstein <fnkl.kernel@gmail.com> + +properties: + compatible: + oneOf: + - enum: + - apple,agx-g13g + - apple,agx-g13s + - apple,agx-g14g + - items: + - enum: + - apple,agx-g13c + - apple,agx-g13d + - const: apple,agx-g13s + + reg: + items: + - description: GPU coprocessor control registers + - description: GPU block MMIO registers + + reg-names: + items: + - const: asc + - const: sgx + + power-domains: + maxItems: 1 + + mboxes: + maxItems: 1 + + memory-region: + items: + - description: Region containing GPU MMU TTBs + - description: Region containing GPU MMU page tables + - description: + Region containing a shared handoff structure for VM + management coordination + - description: Calibration blob. Mostly power-related configuration + - description: Calibration blob. Mostly GPU-related configuration + - description: Shared global variables with GPU firmware + + memory-region-names: + items: + - const: ttbs + - const: pagetables + - const: handoff + - const: hw-cal-a + - const: hw-cal-b + - const: globals + + apple,firmware-abi: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + description: + macOS version the current firmware is paired with, used to pick + the version of firmware ABI to be used. + Bootloader will overwrite this + +required: + - compatible + - reg + - mboxes + - memory-region + - apple,firmware-abi + +additionalProperties: false + +examples: + - | + gpu@6400000 { + compatible = "apple,agx-g13g"; + reg = <0x6400000 0x40000>, + <0x4000000 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; +... diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index b8d659d272d0..aa19f8819231 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -40,6 +40,7 @@ properties: - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable - items: - enum: + - allwinner,sun55i-a523-mali - mediatek,mt8188-mali - mediatek,mt8192-mali - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml index 8d47b290b4ed..7ae8c7b1d006 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml @@ -36,6 +36,7 @@ properties: - items: - enum: - google,gs101-hsi2c + - samsung,exynos2200-hsi2c - samsung,exynos850-hsi2c - const: samsung,exynosautov9-hsi2c - const: samsung,exynos5-hsi2c # Exynos5250 and Exynos5420 diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 2f1e97969c3f..4ac5a40a3886 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -105,6 +105,9 @@ properties: (t(f) in the I2C specification). If not specified we will use the SCL value since they are the same in nearly all cases. + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml index 798a6939b894..e645784b77d3 100644 --- a/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml @@ -22,6 +22,9 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + clock-frequency: default: 100000 diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml index cc39511a49d6..6876eade431b 100644 --- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml +++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml @@ -10,9 +10,6 @@ maintainers: - Chris Brandt <chris.brandt@renesas.com> - Wolfram Sang <wsa+renesas@sang-engineering.com> -allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# - properties: compatible: oneOf: @@ -32,32 +29,50 @@ properties: - renesas,riic-r9a09g056 # RZ/V2N - const: renesas,riic-r9a09g057 # RZ/V2H(P) - - const: renesas,riic-r9a09g057 # RZ/V2H(P) + - enum: + - renesas,riic-r9a09g057 # RZ/V2H(P) + - renesas,riic-r9a09g077 # RZ/T2H + + - items: + - const: renesas,riic-r9a09g087 # RZ/N2H + - const: renesas,riic-r9a09g077 # RZ/T2H reg: maxItems: 1 interrupts: - items: - - description: Transmit End Interrupt - - description: Receive Data Full Interrupt - - description: Transmit Data Empty Interrupt - - description: Stop Condition Detection Interrupt - - description: Start Condition Detection Interrupt - - description: NACK Reception Interrupt - - description: Arbitration-Lost Interrupt - - description: Timeout Interrupt + oneOf: + - items: + - description: Transmit End Interrupt + - description: Receive Data Full Interrupt + - description: Transmit Data Empty Interrupt + - description: Stop Condition Detection Interrupt + - description: Start Condition Detection Interrupt + - description: NACK Reception Interrupt + - description: Arbitration-Lost Interrupt + - description: Timeout Interrupt + - items: + - description: Transfer Error Or Event Generation + - description: Receive Data Full Interrupt + - description: Transmit Data Empty Interrupt + - description: Transmit End Interrupt interrupt-names: - items: - - const: tei - - const: ri - - const: ti - - const: spi - - const: sti - - const: naki - - const: ali - - const: tmoi + oneOf: + - items: + - const: tei + - const: ri + - const: ti + - const: spi + - const: sti + - const: naki + - const: ali + - const: tmoi + - items: + - const: eei + - const: rxi + - const: txi + - const: tei clock-frequency: description: @@ -84,18 +99,40 @@ required: - '#address-cells' - '#size-cells' -if: - properties: - compatible: - contains: - enum: - - renesas,riic-r9a07g043 - - renesas,riic-r9a07g044 - - renesas,riic-r9a07g054 - - renesas,riic-r9a09g057 -then: - required: - - resets +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,riic-r9a09g077 + then: + properties: + interrupts: + maxItems: 4 + interrupt-names: + maxItems: 4 + resets: false + else: + properties: + interrupts: + minItems: 8 + interrupt-names: + minItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - renesas,riic-r9a07g043 + - renesas,riic-r9a07g044 + - renesas,riic-r9a07g054 + - renesas,riic-r9a09g057 + then: + required: + - resets unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml index cad6d53d0e2e..6fa3078074d0 100644 --- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml @@ -14,7 +14,12 @@ allOf: properties: compatible: - const: cdns,i3c-master + oneOf: + - const: cdns,i3c-master + - items: + - enum: + - axiado,ax3000-i3c + - const: cdns,i3c-master reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml new file mode 100644 index 000000000000..ed849ba1b77b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4080.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4080 20-Bit, 40 MSPS, Differential SAR ADC + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + The AD4080 is a high speed, low noise, low distortion, 20-bit, Easy Drive, + successive approximation register (SAR) analog-to-digital converter (ADC). + Maintaining high performance (signal-to-noise and distortion (SINAD) ratio + > 90 dBFS) at signal frequencies in excess of 1 MHz enables the AD4080 to + service a wide variety of precision, wide bandwidth data acquisition + applications. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4080.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad4080 + + reg: + maxItems: 1 + + spi-max-frequency: + description: Configuration of the SPI bus. + maximum: 50000000 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: cnv + + vdd33-supply: true + + vdd11-supply: true + + vddldo-supply: true + + iovdd-supply: true + + vrefin-supply: true + + io-backends: + maxItems: 1 + + adi,lvds-cnv-enable: + description: Enable the LVDS signal type on the CNV pin. Default is CMOS. + type: boolean + + adi,num-lanes: + description: + Number of lanes on which the data is sent on the output (DA, DB pins). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - vdd33-supply + - vrefin-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4080"; + reg = <0>; + spi-max-frequency = <10000000>; + vdd33-supply = <&vdd33>; + vddldo-supply = <&vddldo>; + vrefin-supply = <&vrefin>; + clocks = <&cnv>; + clock-names = "cnv"; + io-backends = <&iio_backend>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4170-4.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4170-4.yaml new file mode 100644 index 000000000000..da93213d12d4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4170-4.yaml @@ -0,0 +1,554 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4170-4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4170-4 and similar Analog to Digital Converters + +maintainers: + - Marcelo Schmitt <marcelo.schmitt@analog.com> + +description: | + Analog Devices AD4170-4 series of Sigma-delta Analog to Digital Converters. + Specifications can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4190-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ad4195-4.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +$defs: + reference-buffer: + description: | + Enable precharge buffer, full buffer, or skip reference buffering of + the positive/negative voltage reference. Because the output impedance + of the source driving the voltage reference inputs may be dynamic, + resistive/capacitive combinations of those inputs can cause DC gain + errors if the reference inputs go unbuffered into the ADC. Enable + reference buffering if the provided reference source has dynamic high + impedance output. Note the absolute voltage allowed on REFINn+ and REFINn- + inputs is from AVSS - 50 mV to AVDD + 50 mV when the reference buffers are + disabled but narrows to AVSS to AVDD when reference buffering is enabled + or in precharge mode. + $ref: /schemas/types.yaml#/definitions/string + enum: [ precharge, full, disabled ] + default: full + +properties: + compatible: + enum: + - adi,ad4170-4 + - adi,ad4190-4 + - adi,ad4195-4 + + avss-supply: + description: + Reference voltage supply for AVSS. A −2.625V minimum and 0V maximum supply + that powers the chip. If not provided, AVSS is assumed to be at system + ground (0V). + + avdd-supply: + description: + A supply of 4.75V to 5.25V relative to AVSS that powers the chip (AVDD). + + iovdd-supply: + description: 1.7V to 5.25V reference supply to the serial interface (IOVDD). + + refin1p-supply: + description: REFIN+ supply that can be used as reference for conversion. + + refin1n-supply: + description: REFIN- supply that can be used as reference for conversion. + + refin2p-supply: + description: REFIN2+ supply that can be used as reference for conversion. + + refin2n-supply: + description: REFIN2- supply that can be used as reference for conversion. + + spi-cpol: true + + spi-cpha: true + + interrupts: + description: + Interrupt for signaling the completion of conversion results. The data + ready signal (RDY) used as interrupt is by default provided on the SDO + pin. Alternatively, it can be provided on the DIG_AUX1 pin in which case + the chip disables the RDY function on SDO. Thus, there can be only one + data ready interrupt enabled at a time. + + interrupt-names: + description: + Specify which pin should be configured as Data Ready interrupt. + enum: + - sdo + - dig_aux1 + + clocks: + maxItems: 1 + description: + Optional external clock source. Can specify either an external clock or + external crystal. + + clock-names: + enum: + - ext-clk + - xtal + default: ext-clk + + '#clock-cells': + const: 0 + + clock-output-names: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is for the GPIO number: 0 to 3. + The second cell takes standard GPIO flags. + + ldac-gpios: + description: + GPIO connected to DIG_AUX2 pin to be used as LDAC toggle to control the + transfer of data from the DAC_INPUT_A register to the DAC. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + adi,vbias-pins: + description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + minimum: 0 + maximum: 8 + +allOf: + # Some devices don't have integrated DAC + - if: + properties: + compatible: + contains: + enum: + - adi,ad4190-4 + - adi,ad4195-4 + then: + properties: + ldac-gpios: false + + # Require to specify the interrupt pin when using interrupts + - if: + required: + - interrupts + then: + required: + - interrupt-names + + # If an external clock is set, the internal clock cannot go out and vice versa + - oneOf: + - required: [clocks] + properties: + '#clock-cells': false + - required: ['#clock-cells'] + properties: + clocks: false + +required: + - compatible + - reg + - avdd-supply + - iovdd-supply + - spi-cpol + - spi-cpha + +unevaluatedProperties: false + +patternProperties: + "^channel@[0-9a-f]$": + $ref: /schemas/iio/adc/adc.yaml# + unevaluatedProperties: false + description: + Represents the external channels which are connected to the ADC. + + properties: + reg: + description: + The channel number. + minimum: 0 + maximum: 15 + + diff-channels: + description: | + This property is used for defining the inputs of a differential + voltage channel. The first value is the positive input and the second + value is the negative input of the channel. + + Besides the analog input pins AIN0 to AIN8, there are special inputs + that can be selected with the following values: + 17: Internal temperature sensor + 18: (AVDD-AVSS)/5 + 19: (IOVDD-DGND)/5 + 20: DAC output + 21: ALDO + 22: DLDO + 23: AVSS + 24: DGND + 25: REFIN+ + 26: REFIN- + 27: REFIN2+ + 28: REFIN2- + 29: REFOUT + For the internal temperature sensor, use the input number for both + inputs (i.e. diff-channels = <17 17>). + items: + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 17, 18, 19, 20, 21, 22, 23, 24, 25, + 26, 27, 28, 29] + + adi,reference-select: + description: | + Select the reference source to use when converting on the + specific channel. Valid values are: + 0: REFIN+/REFIN- + 1: REFIN2+/REFIN2− + 2: REFOUT/AVSS (internal reference) + 3: AVDD/AVSS + If not specified, REFOUT/AVSS is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + + adi,positive-reference-buffer: + $ref: '#/$defs/reference-buffer' + + adi,negative-reference-buffer: + $ref: '#/$defs/reference-buffer' + + adi,sensor-type: + description: + The AD4170-4 and similar designs have features to aid interfacing with + load cell weigh scale, RTD, and thermocouple sensors. Each of those + sensor types requires either distinct wiring configuration or + external circuitry for proper sensor operation and can use different + ADC chip functionality on their setups. A key characteristic of those + external sensors is that they must be excited either by voltage supply + or by ADC chip excitation signals. The sensor can then be read through + a pair of analog inputs. This property specifies which particular + sensor type is connected to the ADC so it can be properly setup and + handled. Omit this property for conventional (not weigh scale, RTD, or + thermocouple) ADC channel setups. + $ref: /schemas/types.yaml#/definitions/string + enum: [ weighscale, rtd, thermocouple ] + + adi,excitation-pin-0: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-pin-1: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-pin-2: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-pin-3: + description: + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20 + default: 0 + + adi,excitation-current-0-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-0 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-current-1-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-1 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-current-2-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-2 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-current-3-microamp: + description: + Excitation current in microamperes to be applied to pin specified in + adi,excitation-pin-3 while this channel is active. + enum: [0, 10, 50, 100, 250, 500, 1000, 1500] + default: 0 + + adi,excitation-ac: + type: boolean + description: + Whether the external sensor has to be AC or DC excited. When omitted, + it is DC excited. + + allOf: + - oneOf: + - required: [single-channel, common-mode-channel] + properties: + diff-channels: false + - required: [diff-channels] + properties: + single-channel: false + common-mode-channel: false + # Usual ADC channels don't need external circuitry excitation. + - if: + not: + required: + - adi,sensor-type + then: + properties: + adi,excitation-pin-0: false + adi,excitation-pin-1: false + adi,excitation-pin-2: false + adi,excitation-pin-3: false + adi,excitation-current-0-microamp: false + adi,excitation-current-1-microamp: false + adi,excitation-current-2-microamp: false + adi,excitation-current-3-microamp: false + adi,excitation-ac: false + # Weigh scale bridge AC excited with one pair of predefined signals. + - if: + allOf: + - properties: + adi,sensor-type: + contains: + const: weighscale + - required: + - adi,excitation-ac + - adi,excitation-pin-2 + - adi,excitation-pin-3 + - not: + required: + - adi,excitation-current-2-microamp + - adi,excitation-current-3-microamp + then: + properties: + adi,excitation-pin-2: + const: 19 + adi,excitation-pin-3: + const: 20 + # Weigh scale bridge AC excited with two pairs of predefined signals. + - if: + allOf: + - properties: + adi,sensor-type: + contains: + const: weighscale + - required: + - adi,excitation-ac + - adi,excitation-pin-0 + - adi,excitation-pin-1 + - adi,excitation-pin-2 + - adi,excitation-pin-3 + - not: + required: + - adi,excitation-current-0-microamp + - adi,excitation-current-1-microamp + - adi,excitation-current-2-microamp + - adi,excitation-current-3-microamp + then: + properties: + adi,excitation-pin-0: + const: 17 + adi,excitation-pin-1: + const: 18 + adi,excitation-pin-2: + const: 19 + adi,excitation-pin-3: + const: 20 + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4170-4"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpol; + spi-cpha; + avdd-supply = <&avdd>; + iovdd-supply = <&iovdd>; + clocks = <&clk>; + clock-names = "xtal"; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "dig_aux1"; + adi,vbias-pins = <8>; + #address-cells = <1>; + #size-cells = <0>; + + // Sample AIN0 with respect to DGND throughout AVDD/DGND input range + // Pseudo-differential unipolar + channel@0 { + reg = <0>; + single-channel = <0>; + common-mode-channel = <24>; + adi,reference-select = <3>; + }; + // Weigh scale sensor + channel@1 { + reg = <1>; + bipolar; + diff-channels = <1 2>; + adi,reference-select = <0>; + adi,positive-reference-buffer = "precharge"; + adi,negative-reference-buffer = "precharge"; + adi,sensor-type = "weighscale"; + adi,excitation-pin-2 = <19>; + adi,excitation-pin-3 = <20>; + adi,excitation-ac; + }; + // RTD sensor + channel@2 { + reg = <2>; + bipolar; + diff-channels = <3 4>; + adi,reference-select = <0>; + adi,sensor-type = "rtd"; + adi,excitation-pin-0 = <5>; + adi,excitation-pin-1 = <6>; + adi,excitation-current-0-microamp = <500>; + adi,excitation-current-1-microamp = <500>; + adi,excitation-ac; + }; + // Thermocouple sensor + channel@3 { + reg = <3>; + bipolar; + diff-channels = <7 8>; + adi,reference-select = <0>; + adi,sensor-type = "thermocouple"; + adi,excitation-pin-0 = <18>; + adi,excitation-current-0-microamp = <500>; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4170-4"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpol; + spi-cpha; + avdd-supply = <&avdd>; + iovdd-supply = <&iovdd>; + #clock-cells = <0>; + clock-output-names = "ad4170-clk16mhz"; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "dig_aux1"; + #address-cells = <1>; + #size-cells = <0>; + + // Sample AIN0 with respect to AIN1 throughout AVDD/AVSS input range + // Differential bipolar. If AVSS < 0V, differential true bipolar + channel@0 { + reg = <0>; + bipolar; + diff-channels = <0 1>; + adi,reference-select = <3>; + }; + // Sample AIN2 with respect to DGND throughout AVDD/DGND input range + // Pseudo-differential unipolar + channel@1 { + reg = <1>; + single-channel = <2>; + common-mode-channel = <24>; + adi,reference-select = <3>; + }; + // Sample AIN3 with respect to 2.5V throughout AVDD/AVSS input range + // Pseudo-differential bipolar + channel@2 { + reg = <2>; + bipolar; + single-channel = <3>; + common-mode-channel = <29>; + adi,reference-select = <3>; + }; + // Sample AIN4 with respect to DGND throughout AVDD/AVSS input range + // Pseudo-differential bipolar + channel@3 { + reg = <3>; + bipolar; + single-channel = <4>; + common-mode-channel = <24>; + adi,reference-select = <3>; + }; + // Sample AIN5 with respect to 2.5V throughout AVDD/AVSS input range + // Pseudo-differential unipolar (AD4170-4 datasheet page 46 example) + channel@4 { + reg = <4>; + single-channel = <5>; + common-mode-channel = <29>; + adi,reference-select = <3>; + }; + // Sample AIN6 with respect to 2.5V throughout REFIN+/REFIN- input range + // Pseudo-differential bipolar + channel@5 { + reg = <5>; + bipolar; + single-channel = <6>; + common-mode-channel = <29>; + adi,reference-select = <0>; + }; + // Weigh scale sensor + channel@6 { + reg = <6>; + bipolar; + diff-channels = <7 8>; + adi,reference-select = <0>; + adi,sensor-type = "weighscale"; + adi,excitation-pin-0 = <17>; + adi,excitation-pin-1 = <18>; + adi,excitation-pin-2 = <19>; + adi,excitation-pin-3 = <20>; + adi,excitation-ac; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml index c6676d91b4e6..b107322e0ea3 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml @@ -69,6 +69,8 @@ properties: spi-max-frequency: maximum: 25000000 + spi-3wire: true + '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml new file mode 100644 index 000000000000..57f097025705 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7405.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7405 family + +maintainers: + - Dragos Bogdan <dragos.bogdan@analog.com> + - Pop Ioan Daniel <pop.ioan-daniel@analog.com> + +description: | + Analog Devices AD7405 is a high performance isolated ADC, 1-channel, + 16-bit with a second-order Σ-Δ modulator that converts an analog input signal + into a high speed, single-bit data stream. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7405.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adum7701.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/adum7702.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7703.pdf + +properties: + compatible: + enum: + - adi,ad7405 + - adi,adum7701 + - adi,adum7702 + - adi,adum7703 + + clocks: + maxItems: 1 + + vdd1-supply: true + + vdd2-supply: true + + io-backends: + maxItems: 1 + +required: + - compatible + - clocks + - vdd1-supply + - vdd2-supply + - io-backends + +additionalProperties: false + +examples: + - | + adc { + compatible = "adi,ad7405"; + clocks = <&axi_clk_gen 0>; + vdd1-supply = <&vdd1>; + vdd2-supply = <&vdd2>; + io-backends = <&axi_adc>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 1a5209139e13..1180d2ffbf84 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -204,6 +204,15 @@ patternProperties: considered a bipolar differential channel. Otherwise it is bipolar single-ended. + adi,rfilter-ohms: + description: + For ADCs that supports gain calibration, this property must be set to + the value of the external RFilter resistor. Proper gain error + correction is applied based on this value. + default: 0 + minimum: 0 + maximum: 64512 + required: - reg - bipolar @@ -262,6 +271,25 @@ allOf: - adi,ad7607 - adi,ad7608 - adi,ad7609 + - adi,ad7616 + then: + patternProperties: + "^channel@[0-9a-f]+$": + properties: + adi,rfilter-ohms: false + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7605-4 + - adi,ad7606-4 + - adi,ad7606-6 + - adi,ad7606-8 + - adi,ad7607 + - adi,ad7608 + - adi,ad7609 then: properties: adi,sw-mode: false @@ -392,6 +420,7 @@ examples: reg = <8>; diff-channels = <8 8>; bipolar; + adi,rfilter-ohms = <2048>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index 3ce59d4d065f..c06d0fc791d3 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -26,7 +26,26 @@ properties: clock-names: const: mclk + trigger-sources: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + description: | + A list of phandles referencing trigger source providers. Each entry + represents a trigger source for the ADC: + + - First entry specifies the device responsible for driving the + synchronization (SYNC_IN) pin, as an alternative to adi,sync-in-gpios. + This can be a `gpio-trigger` or another `ad7768-1` device. If the + device's own SYNC_OUT pin is internally connected to its SYNC_IN pin, + reference the device itself or omit this property. + - Second entry optionally defines a GPIO3 pin used as a START signal trigger. + + Use the accompanying trigger source cell to identify the type of each entry. + interrupts: + description: + DRDY (Data Ready) pin, which signals conversion results are available. maxItems: 1 '#address-cells': @@ -47,6 +66,19 @@ properties: in any way, for example if the filter decimation rate changes. As the line is active low, it should be marked GPIO_ACTIVE_LOW. + regulators: + type: object + description: + list of regulators provided by this controller. + + properties: + vcm-output: + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + additionalProperties: false + reset-gpios: maxItems: 1 @@ -57,6 +89,23 @@ properties: "#io-channel-cells": const: 1 + "#trigger-source-cells": + description: | + Cell indicates the trigger output signal: 0 = SYNC_OUT, 1 = GPIO3, + 2 = DRDY. + + For better readability, macros for these values are available in + dt-bindings/iio/adc/adi,ad7768-1.h. + const: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is for the GPIO number: 0 to 3. + The second cell takes standard GPIO flags. + required: - compatible - reg @@ -65,7 +114,16 @@ required: - vref-supply - spi-cpol - spi-cpha - - adi,sync-in-gpios + +dependencies: + adi,sync-in-gpios: + not: + required: + - trigger-sources + trigger-sources: + not: + required: + - adi,sync-in-gpios patternProperties: "^channel@([0-9]|1[0-5])$": @@ -105,6 +163,8 @@ examples: spi-max-frequency = <2000000>; spi-cpol; spi-cpha; + gpio-controller; + #gpio-cells = <2>; vref-supply = <&adc_vref>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio>; @@ -120,6 +180,12 @@ examples: reg = <0>; label = "channel_0"; }; + + regulators { + vcm_reg: vcm-output { + regulator-name = "ad7768-1-vcm"; + }; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index cf74f84d6103..e91e421a3d6b 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -27,6 +27,7 @@ description: | the ad7606 family. https://wiki.analog.com/resources/fpga/docs/axi_adc_ip + https://analogdevicesinc.github.io/hdl/library/axi_ad408x/index.html https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html @@ -34,6 +35,7 @@ properties: compatible: enum: - adi,axi-adc-10.0.a + - adi,axi-ad408x - adi,axi-ad7606x - adi,axi-ad485x diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml index b489c984c1bb..14363389f30a 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -34,6 +34,10 @@ properties: - const: mediatek,mt2701-auxadc - items: - enum: + - mediatek,mt7981-auxadc + - const: mediatek,mt7986-auxadc + - items: + - enum: - mediatek,mt6893-auxadc - mediatek,mt8183-auxadc - mediatek,mt8186-auxadc diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml index 6497c416094d..5d4ab701f51a 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml @@ -22,6 +22,8 @@ properties: - mediatek,mt6357-auxadc - mediatek,mt6358-auxadc - mediatek,mt6359-auxadc + - mediatek,mt6363-auxadc + - mediatek,mt6373-auxadc "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml index 2c5032be83bd..fd815ab30df1 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml @@ -22,6 +22,9 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + vref-supply: true "#io-channel-cells": diff --git a/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml new file mode 100644 index 000000000000..dd9ec3038703 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/st,spear600-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr ADC device driver + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Integrated ADC inside the ST SPEAr SoC, SPEAr600, supporting + 10-bit resolution. Datasheet can be found here: + https://www.st.com/resource/en/datasheet/spear600.pdf + +properties: + compatible: + enum: + - st,spear600-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + sampling-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2500000 + maximum: 20000000 + description: + Default sampling frequency of the ADC in Hz. + + vref-external: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000 + maximum: 2800 + description: + External voltage reference in milli-volts. If omitted the internal voltage + reference will be used. + + average-samples: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + description: + Number of samples to generate an average value. If omitted, single data + conversion will be used. + +required: + - compatible + - reg + - interrupts + - sampling-frequency + +additionalProperties: false + +examples: + - | + adc@d8200000 { + compatible = "st,spear600-adc"; + reg = <0xd8200000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <6>; + sampling-frequency = <5000000>; + vref-external = <2500>; /* 2.5V VRef */ + }; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,itg3200.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,itg3200.yaml new file mode 100644 index 000000000000..4d8abf8ac2c8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,itg3200.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/gyroscope/invensense,itg3200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Invensense ITG-3200 Gyroscope + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Triple-axis, digital output gyroscope with a three 16-bit analog-to-digital + converters (ADCs) for digitizing the gyro outputs, a user-selectable internal + low-pass filter bandwidth, and a Fast-Mode I2C. + +properties: + compatible: + const: invensense,itg3200 + + reg: + maxItems: 1 + + vdd-supply: true + + vlogic-supply: true + + interrupts: + maxItems: 1 + + mount-matrix: + description: an optional 3x3 mounting rotation matrix. + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ext_clock + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + gyroscope@68 { + compatible = "invensense,itg3200"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml b/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml new file mode 100644 index 000000000000..65d9b44fcd5e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/nicera,d3323aa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nicera D3-323-AA PIR sensor + +maintainers: + - Waqar Hameed <waqar.hameed@axis.com> + +description: | + PIR sensor for human detection. + Datasheet: https://www.endrich.com/Datenbl%C3%A4tter/Sensoren/D3-323-AA_e.pdf + +properties: + compatible: + const: nicera,d3323aa + + vdd-supply: + description: + Supply voltage (1.8 to 5.5 V). + + vout-clk-gpios: + maxItems: 1 + description: + GPIO for clock and detection. + After reset, the device signals with two falling edges on this pin that it + is ready for configuration (within 1.2 s). + During configuration, it is used as clock for data reading and writing (on + data-gpios). + After all this, when device is in operational mode, it signals on this pin + for any detections. + + data-gpios: + maxItems: 1 + description: + GPIO for data reading and writing. This is denoted "DO (SI)" in datasheet. + During configuration, this pin is used for writing and reading + configuration data (together with vout-clk-gpios as clock). + After this, during operational mode, the device will output serial data on + this GPIO. + +required: + - compatible + - vdd-supply + - vout-clk-gpios + - data-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + proximity { + compatible = "nicera,d3323aa"; + vdd-supply = <®ulator_3v3>; + vout-clk-gpios = <&gpio 78 GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml index 58611ba2a0f4..4d72525f407e 100644 --- a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml +++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml @@ -17,9 +17,14 @@ description: | properties: compatible: - enum: - - mediatek,mt8183-cci - - mediatek,mt8186-cci + oneOf: + - enum: + - mediatek,mt8183-cci + - mediatek,mt8186-cci + - items: + - enum: + - mediatek,mt7988-cci + - const: mediatek,mt8183-cci clocks: items: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,milos-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,milos-rpmh.yaml new file mode 100644 index 000000000000..00b7a4108d45 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,milos-rpmh.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,milos-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on Milos SoC + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also: include/dt-bindings/interconnect/qcom,milos-rpmh.h + +properties: + compatible: + enum: + - qcom,milos-aggre1-noc + - qcom,milos-aggre2-noc + - qcom,milos-clk-virt + - qcom,milos-cnoc-cfg + - qcom,milos-cnoc-main + - qcom,milos-gem-noc + - qcom,milos-lpass-ag-noc + - qcom,milos-mc-virt + - qcom,milos-mmss-noc + - qcom,milos-nsp-noc + - qcom,milos-pcie-anoc + - qcom,milos-system-noc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,milos-clk-virt + - qcom,milos-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,milos-pcie-anoc + then: + properties: + clocks: + items: + - description: aggre-NOC PCIe AXI clock + - description: cfg-NOC PCIe a-NOC AHB clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,milos-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre USB3 PRIM AXI clock + - description: aggre UFS PHY AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,milos-aggre2-noc + then: + properties: + clocks: + items: + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,milos-aggre1-noc + - qcom,milos-aggre2-noc + - qcom,milos-pcie-anoc + then: + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,milos-gcc.h> + + interconnect-0 { + compatible = "qcom,milos-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + interconnect@16e0000 { + compatible = "qcom,milos-aggre1-noc"; + reg = <0x016e0000 0x16400>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 83bcf0575cd3..256de140c03d 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -76,6 +76,8 @@ properties: minItems: 1 maxItems: 2 + nonposted-mmio: true + required: - compatible - interconnects diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml index cd4bb912e0dc..ab5a921c3495 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -36,6 +36,11 @@ properties: - qcom,sm8350-epss-l3 - qcom,sm8650-epss-l3 - const: qcom,epss-l3 + - items: + - enum: + - qcom,qcs8300-epss-l3 + - const: qcom,sa8775p-epss-l3 + - const: qcom,epss-l3 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml index 2e0c0bc7a376..db19fd5c5708 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml @@ -13,7 +13,7 @@ description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). - See also:: include/dt-bindings/interconnect/qcom,sa8775p.h + See also: include/dt-bindings/interconnect/qcom,sa8775p.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml index 4647dac740e9..f5d3d0c5df73 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml @@ -18,7 +18,7 @@ description: | least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. - See also:: include/dt-bindings/interconnect/qcom,sar2130p-rpmh.h + See also: include/dt-bindings/interconnect/qcom,sar2130p-rpmh.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml index 78210791496f..81c3dff53992 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml @@ -14,7 +14,7 @@ description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). - See also:: include/dt-bindings/interconnect/qcom,sc7280.h + See also: include/dt-bindings/interconnect/qcom,sc7280.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml index 100c68636909..2a5a7594bafd 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml @@ -14,7 +14,7 @@ description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). - See also:: include/dt-bindings/interconnect/qcom,sc8280xp.h + See also: include/dt-bindings/interconnect/qcom,sc8280xp.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml index b565d1a382f6..978930324bbf 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml @@ -13,7 +13,7 @@ description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). - See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h + See also: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h allOf: - $ref: qcom,rpmh-common.yaml# diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml index 300640a533dd..6a46dc7d473e 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml @@ -14,7 +14,7 @@ description: | RPMh interconnect providers support system bandwidth requirements through RPMh hardware accelerators known as Bus Clock Manager (BCM). - See also:: include/dt-bindings/interconnect/qcom,sm8450.h + See also: include/dt-bindings/interconnect/qcom,sm8450.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml index 716bd21f6041..5325ebe23c77 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml @@ -18,7 +18,7 @@ description: | least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. - See also:: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h + See also: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml index f9322de7cd61..199fe7b232af 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml @@ -18,7 +18,7 @@ description: | least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. - See also:: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h + See also: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml index a816acc301e1..366f40d980c2 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml @@ -18,7 +18,7 @@ description: | least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. - See also:: include/dt-bindings/interconnect/qcom,sm8750-rpmh.h + See also: include/dt-bindings/interconnect/qcom,sm8750-rpmh.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml index 08b0210e0e59..0840b0ec6e27 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml @@ -18,7 +18,7 @@ description: | least one RPMh device child node pertaining to their RSC and each provider can map to multiple RPMh resources. - See also:: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h + See also: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h properties: compatible: diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml b/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml new file mode 100644 index 000000000000..eb2eb611ac09 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/andestech,plicsw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Andes machine-level software interrupt controller + +description: + In the Andes platform such as QiLai SoC, the PLIC module is instantiated a + second time with all interrupt sources tied to zero as the software interrupt + controller (PLIC_SW). PLIC_SW directly connects to the machine-mode + inter-processor interrupt lines of CPUs, so RISC-V per-CPU local interrupt + controller is the parent interrupt controller for PLIC_SW. PLIC_SW can + generate machine-mode inter-processor interrupts through programming its + registers. + +maintainers: + - Ben Zong-You Xie <ben717@andestech.com> + +properties: + compatible: + items: + - enum: + - andestech,qilai-plicsw + - const: andestech,plicsw + + reg: + maxItems: 1 + + interrupts-extended: + minItems: 1 + maxItems: 15872 + description: + Specifies which harts are connected to the PLIC_SW. Each item must points + to a riscv,cpu-intc node, which has a riscv cpu node as parent. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts-extended + +examples: + - | + interrupt-controller@400000 { + compatible = "andestech,qilai-plicsw", "andestech,plicsw"; + reg = <0x400000 0x400000>; + interrupts-extended = <&cpu0intc 3>, + <&cpu1intc 3>, + <&cpu2intc 3>, + <&cpu3intc 3>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/apm,xgene1-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/apm,xgene1-msi.yaml new file mode 100644 index 000000000000..49db952697f3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/apm,xgene1-msi.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/apm,xgene1-msi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AppliedMicro X-Gene v1 PCIe MSI controller + +maintainers: + - Toan Le <toan@os.amperecomputing.com> + +properties: + compatible: + const: apm,xgene1-msi + + msi-controller: true + + reg: + maxItems: 1 + + interrupts: + maxItems: 16 + +required: + - compatible + - msi-controller + - reg + - interrupts + +additionalProperties: false + +examples: + - | + msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x79000000 0x900000>; + interrupts = <0x0 0x10 0x4>, + <0x0 0x11 0x4>, + <0x0 0x12 0x4>, + <0x0 0x13 0x4>, + <0x0 0x14 0x4>, + <0x0 0x15 0x4>, + <0x0 0x16 0x4>, + <0x0 0x17 0x4>, + <0x0 0x18 0x4>, + <0x0 0x19 0x4>, + <0x0 0x1a 0x4>, + <0x0 0x1b 0x4>, + <0x0 0x1c 0x4>, + <0x0 0x1d 0x4>, + <0x0 0x1e 0x4>, + <0x0 0x1f 0x4>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml index d89eca956c5f..32dfa2bf05d8 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml @@ -17,6 +17,7 @@ description: properties: compatible: enum: + - arm,armv7m-nvic # deprecated - arm,v6m-nvic - arm,v7m-nvic - arm,v8m-nvic @@ -30,7 +31,7 @@ properties: interrupt-controller: true '#interrupt-cells': - const: 2 + enum: [1, 2] description: | Number of cells to encode an interrupt source: first = interrupt number, second = priority. diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,icoll.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,icoll.yaml new file mode 100644 index 000000000000..7b09fd7d588f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,icoll.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,icoll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS icoll Interrupt controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx23-icoll + - fsl,imx28-icoll + - const: fsl,icoll + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + interrupt-controller@80000000 { + compatible = "fsl,imx28-icoll", "fsl,icoll"; + reg = <0x80000000 0x2000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mpic-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mpic-msi.yaml new file mode 100644 index 000000000000..78d784973661 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mpic-msi.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,mpic-msi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MSI interrupt controller + +description: | + The Freescale hypervisor and msi-address-64 + ------------------------------------------- + + Normally, PCI devices have access to all of CCSR via an ATMU mapping. The + Freescale MSI driver calculates the address of MSIIR (in the MSI register + block) and sets that address as the MSI message address. + + In a virtualized environment, the hypervisor may need to create an IOMMU + mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement + because of hardware limitations of the Peripheral Access Management Unit + (PAMU), which is currently the only IOMMU that the hypervisor supports. + The ATMU is programmed with the guest physical address, and the PAMU + intercepts transactions and reroutes them to the true physical address. + + In the PAMU, each PCI controller is given only one primary window. The + PAMU restricts DMA operations so that they can only occur within a window. + Because PCI devices must be able to DMA to memory, the primary window must + be used to cover all of the guest's memory space. + + PAMU primary windows can be divided into 256 subwindows, and each + subwindow can have its own address mapping ("guest physical" to "true + physical"). However, each subwindow has to have the same alignment, which + means they cannot be located at just any address. Because of these + restrictions, it is usually impossible to create a 4KB subwindow that + covers MSIIR where it's normally located. + + Therefore, the hypervisor has to create a subwindow inside the same + primary window used for memory, but mapped to the MSIR block (where MSIIR + lives). The first subwindow after the end of guest memory is used for + this. The address specified in the msi-address-64 property is the PCI + address of MSIIR. The hypervisor configures the PAMU to map that address to + the true physical address of MSIIR. + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +properties: + compatible: + oneOf: + - enum: + - fsl,mpic-msi + - fsl,mpic-msi-v4.3 + - fsl,ipic-msi + - fsl,vmpic-msi + - fsl,vmpic-msi-v4.3 + - items: + - enum: + - fsl,mpc8572-msi + - fsl,mpc8610-msi + - fsl,mpc8641-msi + - const: fsl,mpic-msi + + reg: + minItems: 1 + items: + - description: Address and length of the shared message interrupt + register set + - description: Address of aliased MSIIR or MSIIR1 register for platforms + that have such an alias. If using MSIIR1, the second region must be + added because different MSI group has different MSIIR1 offset. + + interrupts: + minItems: 1 + maxItems: 16 + description: + Each one of the interrupts here is one entry per 32 MSIs, and routed to + the host interrupt controller. The interrupts should be set as edge + sensitive. If msi-available-ranges is present, only the interrupts that + correspond to available ranges shall be present. + + msi-available-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: First MSI interrupt in this range + - description: Number of MSI interrupts in this range + description: + Define which MSI interrupt can be used in the 256 MSI interrupts. + If not specified, all the MSI interrupts can be used. + Each available range must begin and end on a multiple of 32 (i.e. no + splitting an individual MSI register or the associated PIC interrupt). + + msi-address-64: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + 64-bit PCI address of the MSIIR register. The MSIIR register is used for + MSI messaging. The address of MSIIR in PCI address space is the MSI + message address. + + This property may be used in virtualized environments where the hypervisor + has created an alternate mapping for the MSIR block. See the top-level + description for an explanation. + +required: + - compatible + - reg + - interrupts + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,mpic-msi-v4.3 + - fsl,vmpic-msi-v4.3 + then: + properties: + interrupts: + minItems: 16 + description: + Version 4.3 implies that there are 16 shared interrupts, and they + are configured through MSIIR1. + + # MPIC v4.3 does not support this property because the 32 interrupts of + # an individual register are not continuous when using MSIIR1. + msi-available-ranges: false + + reg: + minItems: 2 + + else: + properties: + interrupts: + maxItems: 8 + description: + In versions before 4.3, only 8 shared interrupts are available, and + they are configured through MSIIR. + +unevaluatedProperties: false + +examples: + - | + msi@41600 { + compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = <0xe0 0>, <0xe1 0>, <0xe2 0>, <0xe3 0>, + <0xe4 0>, <0xe5 0>, <0xe6 0>, <0xe7 0>; + }; + + - | + msi@41600 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41600 0x200>, <0x44148 4>; + interrupts = <0xe0 0 0 0>, <0xe1 0 0 0>, <0xe2 0 0 0>, <0xe3 0 0 0>, + <0xe4 0 0 0>, <0xe5 0 0 0>, <0xe6 0 0 0>, <0xe7 0 0 0>, + <0x100 0 0 0>, <0x101 0 0 0>, <0x102 0 0 0>, <0x103 0 0 0>, + <0x104 0 0 0>, <0x105 0 0 0>, <0x106 0 0 0>, <0x107 0 0 0>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml new file mode 100644 index 000000000000..fdc254f8d013 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,vf610-mscm-ir.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Vybrid Miscellaneous System Control - Interrupt Router + +description: + The MSCM IP contains multiple sub modules, this binding describes the second + block of registers which control the interrupt router. The interrupt router + allows to configure the recipient of each peripheral interrupt. Furthermore + it controls the directed processor interrupts. The module is available in all + Vybrid SoC's but is only really useful in dual core configurations (VF6xx + which comes with a Cortex-A5/Cortex-M4 combination). + + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,vf610-mscm-ir + + reg: + maxItems: 1 + + fsl,cpucfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The handle to the MSCM CPU configuration node, required + to get the current CPU ID + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + Two cells, interrupt number and cells. + The hardware interrupt number according to interrupt + assignment of the interrupt router is required. + Flags get passed only when using GIC as parent. Flags + encoding as documented by the GIC bindings. + +required: + - compatible + - reg + - fsl,cpucfg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + interrupt-controller@40001800 { + compatible = "fsl,vf610-mscm-ir"; + reg = <0x40001800 0x400>; + fsl,cpucfg = <&mscm_cpucfg>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml index 123d24b05556..30d76692ca87 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml @@ -21,6 +21,7 @@ properties: - enum: - mediatek,mt2701-sysirq - mediatek,mt2712-sysirq + - mediatek,mt6572-sysirq - mediatek,mt6580-sysirq - mediatek,mt6582-sysirq - mediatek,mt6589-sysirq diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index ffc4768bad06..5b827bc24301 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -53,6 +53,7 @@ properties: oneOf: - items: - enum: + - andestech,qilai-plic - renesas,r9a07g043-plic - const: andestech,nceplic100 - items: diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml index 8d330906bbbd..c1ab865fcd64 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml @@ -4,23 +4,32 @@ $id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-sswi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: T-HEAD C900 ACLINT Supervisor-level Software Interrupt Device +title: ACLINT Supervisor-level Software Interrupt Device maintainers: - Inochi Amaoto <inochiama@outlook.com> description: - The SSWI device is a part of the THEAD ACLINT device. It provides - supervisor-level IPI functionality for a set of HARTs on a THEAD - platform. It provides a register to set an IPI (SETSSIP) for each - HART connected to the SSWI device. + The SSWI device is a part of the ACLINT device. It provides + supervisor-level IPI functionality for a set of HARTs on a supported + platforms. It provides a register to set an IPI (SETSSIP) for each + HART connected to the SSWI device. See draft specification + https://github.com/riscvarchive/riscv-aclint + + Following variants of the SSWI ACLINT supported, using dedicated + compatible string + - THEAD C900 + - MIPS P8700 properties: compatible: - items: - - enum: - - sophgo,sg2044-aclint-sswi - - const: thead,c900-aclint-sswi + oneOf: + - items: + - enum: + - sophgo,sg2044-aclint-sswi + - const: thead,c900-aclint-sswi + - items: + - const: mips,p8700-aclint-sswi reg: maxItems: 1 @@ -34,6 +43,14 @@ properties: minItems: 1 maxItems: 4095 + riscv,hart-indexes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4095 + description: + A list of hart indexes that APLIC should use to address each hart + that is mentioned in the "interrupts-extended" + additionalProperties: false required: @@ -43,8 +60,22 @@ required: - interrupt-controller - interrupts-extended +allOf: + - if: + properties: + compatible: + contains: + const: mips,p8700-aclint-sswi + then: + required: + - riscv,hart-indexes + else: + properties: + riscv,hart-indexes: false + examples: - | + //Example 1 interrupt-controller@94000000 { compatible = "sophgo,sg2044-aclint-sswi", "thead,c900-aclint-sswi"; reg = <0x94000000 0x00004000>; @@ -55,4 +86,19 @@ examples: <&cpu3intc 1>, <&cpu4intc 1>; }; + + - | + //Example 2 + interrupt-controller@94000000 { + compatible = "mips,p8700-aclint-sswi"; + reg = <0x94000000 0x00004000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupts-extended = <&cpu1intc 1>, + <&cpu2intc 1>, + <&cpu3intc 1>, + <&cpu4intc 1>; + riscv,hart-indexes = <0x0 0x1 0x10 0x11>; + }; + ... diff --git a/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml new file mode 100644 index 000000000000..b4f58ed25993 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/xlnx,intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Interrupt Controller + +maintainers: + - Michal Simek <michal.simek@amd.com> + +description: + The controller is a soft IP core that is configured at build time for the + number of interrupts and the type of each interrupt. These details cannot + be changed at run time. + +properties: + compatible: + const: xlnx,xps-intc-1.00.a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + "#interrupt-cells": + const: 2 + description: + Specifies the number of cells needed to encode an interrupt source. + The value shall be a minimum of 1. The Xilinx device trees typically + use 2 but the 2nd value is not used. + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: + Specifies the interrupt of the parent controller from which it is chained. + + xlnx,kind-of-intr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + A 32 bit value specifying the interrupt type for each possible interrupt + (1 = edge, 0 = level). The interrupt type typically comes in thru + the device tree node of the interrupt generating device, but in this case + the interrupt type is determined by the interrupt controller based on how + it was implemented. + + xlnx,num-intr-inputs: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + description: + Specifies the number of interrupts supported by the specific + implementation of the controller. + +required: + - reg + - "#interrupt-cells" + - interrupt-controller + - xlnx,kind-of-intr + - xlnx,num-intr-inputs + +additionalProperties: false + +examples: + - | + interrupt-controller@41800000 { + compatible = "xlnx,xps-intc-1.00.a"; + reg = <0x41800000 0x10000>; + #interrupt-cells = <2>; + interrupt-controller; + xlnx,kind-of-intr = <0x1>; + xlnx,num-intr-inputs = <1>; + }; diff --git a/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml index 5d015eeb06d0..d4838c3b3741 100644 --- a/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml @@ -139,9 +139,9 @@ examples: /* The IOMMU programming interface uses slot 00:01.0 */ iommu0: iommu@1,0 { - compatible = "pci1efd,edf1", "riscv,pci-iommu"; - reg = <0x800 0 0 0 0>; - #iommu-cells = <1>; + compatible = "pci1efd,edf1", "riscv,pci-iommu"; + reg = <0x800 0 0 0 0>; + #iommu-cells = <1>; }; }; }; diff --git a/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml new file mode 100644 index 000000000000..8b0d71901195 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/ipmb-dev.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The Intelligent Platform Management Bus(IPMB) Device + +description: | + The IPMB is an I2C bus which provides interconnection between a Baseboard + Management Controller(BMC) and chassis electronics. The BMC sends IPMI + requests to intelligent controllers like Satellite Management Controller(MC) + devices via IPMB and the device sends responses back to the BMC. + This device uses an I2C slave device to send and receive IPMB messages, + either on a BMC or other MC. A miscellaneous device provices a user space + program to communicate with the kernel and the backend device. Some IPMB + devices only support the I2C protocol and not the SMB protocol. + + IPMB communications protocol Specification V1.0 + https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmp-spec-v1.0.pdf + +maintainers: + - Ninad Palsule <ninad@linux.ibm.com> + +properties: + compatible: + enum: + - ipmb-dev + + reg: + maxItems: 1 + + i2c-protocol: + description: + Use I2C block transfer instead of SMBUS block transfer. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/i2c/i2c.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ipmb-dev@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml index d84e28e616d7..d2e1d8afc302 100644 --- a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml +++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml @@ -87,106 +87,105 @@ additionalProperties: false examples: - | - #include <dt-bindings/leds/common.h> - led-controller { - compatible = "mediatek,mt6360-led"; - #address-cells = <1>; - #size-cells = <0>; - - multi-led@0 { - reg = <0>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_RGB>; - led-max-microamp = <24000>; - #address-cells = <1>; - #size-cells = <0>; - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - }; - led@2 { - reg = <2>; - color = <LED_COLOR_ID_BLUE>; - }; - }; - led@3 { - reg = <3>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_WHITE>; - led-max-microamp = <150000>; - }; - led@4 { - reg = <4>; - function = LED_FUNCTION_FLASH; - color = <LED_COLOR_ID_WHITE>; - function-enumerator = <1>; - led-max-microamp = <200000>; - flash-max-microamp = <500000>; - flash-max-timeout-us = <1024000>; - }; - led@5 { - reg = <5>; - function = LED_FUNCTION_FLASH; - color = <LED_COLOR_ID_WHITE>; - function-enumerator = <2>; - led-max-microamp = <200000>; - flash-max-microamp = <500000>; - flash-max-timeout-us = <1024000>; - }; - }; + #include <dt-bindings/leds/common.h> + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; - | - - led-controller { - compatible = "mediatek,mt6360-led"; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_RED>; - led-max-microamp = <24000>; - }; - led@1 { - reg = <1>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_GREEN>; - led-max-microamp = <24000>; - }; - led@2 { - reg = <2>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_BLUE>; - led-max-microamp = <24000>; - }; - led@3 { - reg = <3>; - function = LED_FUNCTION_INDICATOR; - color = <LED_COLOR_ID_WHITE>; - led-max-microamp = <150000>; - }; - led@4 { - reg = <4>; - function = LED_FUNCTION_FLASH; - color = <LED_COLOR_ID_WHITE>; - function-enumerator = <1>; - led-max-microamp = <200000>; - flash-max-microamp = <500000>; - flash-max-timeout-us = <1024000>; - }; - led@5 { - reg = <5>; - function = LED_FUNCTION_FLASH; - color = <LED_COLOR_ID_WHITE>; - function-enumerator = <2>; - led-max-microamp = <200000>; - flash-max-microamp = <500000>; - flash-max-timeout-us = <1024000>; - }; - }; + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + led-max-microamp = <24000>; + }; + led@1 { + reg = <1>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + led-max-microamp = <24000>; + }; + led@2 { + reg = <2>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + led-max-microamp = <24000>; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; ... diff --git a/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml new file mode 100644 index 000000000000..66d75b7bc8c8 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/cix,sky1-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cixtech mailbox controller + +maintainers: + - Guomin Chen <Guomin.Chen@cixtech.com> + +description: + The Cixtech mailbox controller, used in the Cixtech Sky1 SoC, + is used for message transmission between multiple processors + within the SoC, such as the AP, PM, audio DSP, SensorHub MCU, + and others + + Each Cixtech mailbox controller is unidirectional, so they are + typically used in pairs-one for receiving and one for transmitting. + + Each Cixtech mailbox supports 11 channels with different transmission modes + channel 0-7 - Fast channel with 32bit transmit register and IRQ support + channel 8 - Doorbell mode,using the mailbox as an interrupt-generating + mechanism. + channel 9 - Fifo based channel with 32*32bit depth fifo and IRQ support + channel 10 - Reg based channel with 32*32bit transmit register and + Doorbell+transmit acknowledgment IRQ support + + In the CIX Sky1 SoC use case, there are 4 pairs of mailbox controllers + AP <--> PM - using Doorbell transfer mode + AP <--> SE - using REG transfer mode + AP <--> DSP - using FIFO transfer mode + AP <--> SensorHub - using FIFO transfer mode + +properties: + compatible: + const: cix,sky1-mbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + + cix,mbox-dir: + $ref: /schemas/types.yaml#/definitions/string + description: Direction of the mailbox relative to the AP + enum: [tx, rx] + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - cix,mbox-dir + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mbox_ap2pm: mailbox@30000000 { + compatible = "cix,sky1-mbox"; + reg = <0 0x30000000 0 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "tx"; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml index 2d14fc948999..d97050e40fbf 100644 --- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -64,9 +64,10 @@ properties: compatible: oneOf: - - const: nvidia,tegra186-hsp - - const: nvidia,tegra194-hsp - - const: nvidia,tegra264-hsp + - enum: + - nvidia,tegra186-hsp + - nvidia,tegra194-hsp + - nvidia,tegra264-hsp - items: - const: nvidia,tegra234-hsp - const: nvidia,tegra194-hsp @@ -76,7 +77,7 @@ properties: interrupts: minItems: 1 - maxItems: 9 + maxItems: 17 interrupt-names: oneOf: @@ -86,6 +87,25 @@ properties: - items: - const: doorbell + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + + - items: + - const: doorbell - pattern: "^shared[0-7]$" - pattern: "^shared[0-7]$" - pattern: "^shared[0-7]$" diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt deleted file mode 100644 index 22b77ee02f58..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt +++ /dev/null @@ -1,127 +0,0 @@ -* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller - -Required properties: - -- compatible: Must be "arm,primecell" and exactly one from - "arm,pl172", "arm,pl175" or "arm,pl176". - -- reg: Must contains offset/length value for controller. - -- #address-cells: Must be 2. The partition number has to be encoded in the - first address cell and it may accept values 0..N-1 - (N - total number of partitions). The second cell is the - offset into the partition. - -- #size-cells: Must be set to 1. - -- ranges: Must contain one or more chip select memory regions. - -- clocks: Must contain references to controller clocks. - -- clock-names: Must contain "mpmcclk" and "apb_pclk". - -- clock-ranges: Empty property indicating that child nodes can inherit - named clocks. Required only if clock tree data present - in device tree. - See clock-bindings.txt - -Child chip-select (cs) nodes contain the memory devices nodes connected to -such as NOR (e.g. cfi-flash) and NAND. - -Required child cs node properties: - -- #address-cells: Must be 2. - -- #size-cells: Must be 1. - -- ranges: Empty property indicating that child nodes can inherit - memory layout. - -- clock-ranges: Empty property indicating that child nodes can inherit - named clocks. Required only if clock tree data present - in device tree. - -- mpmc,cs: Chip select number. Indicates to the pl0172 driver - which chipselect is used for accessing the memory. - -- mpmc,memory-width: Width of the chip select memory. Must be equal to - either 8, 16 or 32. - -Optional child cs node config properties: - -- mpmc,async-page-mode: Enable asynchronous page mode. - -- mpmc,cs-active-high: Set chip select polarity to active high. - -- mpmc,byte-lane-low: Set byte lane state to low. - -- mpmc,extended-wait: Enable extended wait. - -- mpmc,buffer-enable: Enable write buffer, option is not supported by - PL175 and PL176 controllers. - -- mpmc,write-protect: Enable write protect. - -Optional child cs node timing properties: - -- mpmc,write-enable-delay: Delay from chip select assertion to write - enable (WE signal) in nano seconds. - -- mpmc,output-enable-delay: Delay from chip select assertion to output - enable (OE signal) in nano seconds. - -- mpmc,write-access-delay: Delay from chip select assertion to write - access in nano seconds. - -- mpmc,read-access-delay: Delay from chip select assertion to read - access in nano seconds. - -- mpmc,page-mode-read-delay: Delay for asynchronous page mode sequential - accesses in nano seconds. - -- mpmc,turn-round-delay: Delay between access to memory banks in nano - seconds. - -If any of the above timing parameters are absent, current parameter value will -be taken from the corresponding HW reg. - -Example for pl172 with nor flash on chip select 0 shown below. - -emc: memory-controller@40005000 { - compatible = "arm,pl172", "arm,primecell"; - reg = <0x40005000 0x1000>; - clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; - clock-names = "mpmcclk", "apb_pclk"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x1c000000 0x1000000 - 1 0 0x1d000000 0x1000000 - 2 0 0x1e000000 0x1000000 - 3 0 0x1f000000 0x1000000>; - - cs0 { - #address-cells = <2>; - #size-cells = <1>; - ranges; - - mpmc,cs = <0>; - mpmc,memory-width = <16>; - mpmc,byte-lane-low; - mpmc,write-enable-delay = <0>; - mpmc,output-enable-delay = <0>; - mpmc,read-enable-delay = <70>; - mpmc,page-mode-read-delay = <70>; - - flash@0,0 { - compatible = "sst,sst39vf320", "cfi-flash"; - reg = <0 0 0x400000>; - bank-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "data"; - reg = <0 0x400000>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.yaml new file mode 100644 index 000000000000..c1b702669bd9 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.yaml @@ -0,0 +1,222 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/arm,pl172.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PL172/PL175/PL176 MultiPort Memory Controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl172 + - arm,pl175 + - arm,pl176 + required: + - compatible + +properties: + compatible: + items: + - enum: + - arm,pl172 + - arm,pl175 + - arm,pl176 + - const: arm,primecell + + reg: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + + ranges: true + + clocks: + maxItems: 2 + + clock-names: + items: + - const: mpmcclk + - const: apb_pclk + + clock-ranges: true + + resets: + maxItems: 1 + +patternProperties: + "^cs[0-9]$": + type: object + additionalProperties: false + patternProperties: + "^flash@[0-9],[0-9a-f]+$": + type: object + $ref: /schemas/mtd/mtd-physmap.yaml# + unevaluatedProperties: false + + "^(gpio|sram)@[0-9],[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + + ranges: true + + clocks: + maxItems: 2 + + clock-ranges: true + + mpmc,cs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Chip select number. Indicates to the pl0172 driver + which chipselect is used for accessing the memory. + + mpmc,memory-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 32] + description: + Width of the chip select memory. Must be equal to either 8, 16 or 32. + + mpmc,async-page-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable asynchronous page mode. + + mpmc,cs-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set chip select polarity to active high. + + mpmc,byte-lane-low: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set byte lane state to low. + + mpmc,extended-wait: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable extended wait. + + mpmc,buffer-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable write buffer, option is not supported by + PL175 and PL176 controllers. + + mpmc,write-protect: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable write protect. + + mpmc,read-enable-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay from chip select assertion to read + enable (RE signal) in nano seconds. + + mpmc,write-enable-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay from chip select assertion to write + enable (WE signal) in nano seconds. + + mpmc,output-enable-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay from chip select assertion to output + enable (OE signal) in nano seconds. + + mpmc,write-access-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay from chip select assertion to write + access in nano seconds. + + mpmc,read-access-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay from chip select assertion to read + access in nano seconds. + + mpmc,page-mode-read-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay for asynchronous page mode sequential + accesses in nano seconds. + + mpmc,turn-round-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Delay between access to memory banks in nano + seconds. + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + + memory-controller@40005000 { + compatible = "arm,pl172", "arm,primecell"; + reg = <0x40005000 0x1000>; + clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; + clock-names = "mpmcclk", "apb_pclk"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x1c000000 0x1000000 + 1 0 0x1d000000 0x1000000 + 2 0 0x1e000000 0x1000000 + 3 0 0x1f000000 0x1000000>; + + cs0 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <0>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <0>; + mpmc,read-enable-delay = <70>; + mpmc,page-mode-read-delay = <70>; + + flash@0,0 { + compatible = "sst,sst39vf320", "cfi-flash"; + reg = <0 0 0x400000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "data"; + reg = <0 0x400000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml index 4b072c879b02..b935894bd4fc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml @@ -11,25 +11,37 @@ maintainers: properties: compatible: - items: - - enum: - - brcm,brcmstb-memc-ddr-rev-b.1.x - - brcm,brcmstb-memc-ddr-rev-b.2.0 - - brcm,brcmstb-memc-ddr-rev-b.2.1 - - brcm,brcmstb-memc-ddr-rev-b.2.2 - - brcm,brcmstb-memc-ddr-rev-b.2.3 - - brcm,brcmstb-memc-ddr-rev-b.2.5 - - brcm,brcmstb-memc-ddr-rev-b.2.6 - - brcm,brcmstb-memc-ddr-rev-b.2.7 - - brcm,brcmstb-memc-ddr-rev-b.2.8 - - brcm,brcmstb-memc-ddr-rev-b.3.0 - - brcm,brcmstb-memc-ddr-rev-b.3.1 - - brcm,brcmstb-memc-ddr-rev-c.1.0 - - brcm,brcmstb-memc-ddr-rev-c.1.1 - - brcm,brcmstb-memc-ddr-rev-c.1.2 - - brcm,brcmstb-memc-ddr-rev-c.1.3 - - brcm,brcmstb-memc-ddr-rev-c.1.4 - - const: brcm,brcmstb-memc-ddr + oneOf: + - description: Revision > 2.1 controllers + items: + - enum: + - brcm,brcmstb-memc-ddr-rev-b.2.2 + - brcm,brcmstb-memc-ddr-rev-b.2.3 + - brcm,brcmstb-memc-ddr-rev-b.2.5 + - brcm,brcmstb-memc-ddr-rev-b.2.6 + - brcm,brcmstb-memc-ddr-rev-b.2.7 + - brcm,brcmstb-memc-ddr-rev-b.2.8 + - brcm,brcmstb-memc-ddr-rev-b.3.0 + - brcm,brcmstb-memc-ddr-rev-b.3.1 + - brcm,brcmstb-memc-ddr-rev-c.1.0 + - brcm,brcmstb-memc-ddr-rev-c.1.1 + - brcm,brcmstb-memc-ddr-rev-c.1.2 + - brcm,brcmstb-memc-ddr-rev-c.1.3 + - brcm,brcmstb-memc-ddr-rev-c.1.4 + - const: brcm,brcmstb-memc-ddr-rev-b.2.1 + - const: brcm,brcmstb-memc-ddr + - description: Revision 2.1 controllers + items: + - const: brcm,brcmstb-memc-ddr-rev-b.2.1 + - const: brcm,brcmstb-memc-ddr + - description: Revision 2.0 controllers + items: + - const: brcm,brcmstb-memc-ddr-rev-b.2.0 + - const: brcm,brcmstb-memc-ddr + - description: Revision 1.x controllers + items: + - const: brcm,brcmstb-memc-ddr-rev-b.1.x + - const: brcm,brcmstb-memc-ddr reg: maxItems: 1 @@ -46,7 +58,9 @@ additionalProperties: false examples: - | memory-controller@9902000 { - compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr"; + compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", + "brcm,brcmstb-memc-ddr-rev-b.2.1", + "brcm,brcmstb-memc-ddr"; reg = <0x9902000 0x600>; clock-frequency = <2133000000>; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index 935d63d181d9..b901f1b3e0fc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -32,6 +32,7 @@ properties: - nvidia,tegra186-mc - nvidia,tegra194-mc - nvidia,tegra234-mc + - nvidia,tegra264-mc reg: minItems: 6 @@ -42,8 +43,12 @@ properties: maxItems: 18 interrupts: - items: - - description: MC general interrupt + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 "#address-cells": const: 2 @@ -74,6 +79,7 @@ patternProperties: - nvidia,tegra186-emc - nvidia,tegra194-emc - nvidia,tegra234-emc + - nvidia,tegra264-emc reg: minItems: 1 @@ -127,6 +133,15 @@ patternProperties: reg: minItems: 2 + - if: + properties: + compatible: + const: nvidia,tegra264-emc + then: + properties: + reg: + minItems: 2 + additionalProperties: false required: @@ -158,6 +173,12 @@ allOf: - const: ch2 - const: ch3 + interrupts: + items: + - description: MC general interrupt + + interrupt-names: false + - if: properties: compatible: @@ -189,6 +210,12 @@ allOf: - const: ch14 - const: ch15 + interrupts: + items: + - description: MC general interrupt + + interrupt-names: false + - if: properties: compatible: @@ -220,6 +247,59 @@ allOf: - const: ch14 - const: ch15 + interrupts: + items: + - description: MC general interrupt + + interrupt-names: false + + - if: + properties: + compatible: + const: nvidia,tegra264-mc + then: + properties: + reg: + minItems: 17 + maxItems: 17 + description: 17 memory controller channels + + reg-names: + items: + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 + + interrupts: + minItems: 8 + maxItems: 8 + description: One interrupt line for each MC component + + interrupt-names: + items: + - const: mcf + - const: hub1 + - const: hub2 + - const: hub3 + - const: hub4 + - const: hub5 + - const: sbs + - const: channel + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml index 2bfe63ec62dc..7a84f5bb7284 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml @@ -23,7 +23,14 @@ allOf: properties: compatible: - const: renesas,r9a09g047-xspi # RZ/G3E + oneOf: + - const: renesas,r9a09g047-xspi # RZ/G3E + + - items: + - enum: + - renesas,r9a09g056-xspi # RZ/V2N + - renesas,r9a09g057-xspi # RZ/V2H(P) + - const: renesas,r9a09g047-xspi reg: items: diff --git a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml index ee2272f754a3..2d4ecee3f254 100644 --- a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml +++ b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml @@ -15,14 +15,21 @@ description: properties: compatible: - items: - - enum: - - adi,adp5585-00 # Default - - adi,adp5585-01 # 11 GPIOs - - adi,adp5585-02 # No pull-up resistors by default on special pins - - adi,adp5585-03 # Alternate I2C address - - adi,adp5585-04 # Pull-down resistors on all pins by default - - const: adi,adp5585 + oneOf: + - items: + - enum: + - adi,adp5585-00 # Default + - adi,adp5585-01 # 11 GPIOs + - adi,adp5585-02 # No pull-up resistors by default on special pins + - adi,adp5585-03 # Alternate I2C address + - adi,adp5585-04 # Pull-down resistors on all pins by default + - const: adi,adp5585 + - items: + - enum: + - adi,adp5589-00 # Default + - adi,adp5589-01 # R4 defaulted to RESET1 output + - adi,adp5589-02 # Pull-down resistors by default on special pins + - const: adi,adp5589 reg: maxItems: 1 @@ -32,6 +39,9 @@ properties: vdd-supply: true + reset-gpios: + maxItems: 1 + gpio-controller: true '#gpio-cells': @@ -42,6 +52,84 @@ properties: "#pwm-cells": const: 3 + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + poll-interval: + enum: [10, 20, 30, 40] + default: 10 + + adi,keypad-pins: + description: Specifies the pins used for the keypad matrix. + $ref: /schemas/types.yaml#/definitions/uint32-array + + adi,unlock-events: + description: + Specifies a maximum of 2 events that can be used to unlock the keypad. + If this property is set, the keyboard will be locked and only unlocked + after these keys/gpis are pressed. The value 127 serves as a wildcard which + means any key can be used for unlocking. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + anyOf: + - minimum: 1 + maximum: 88 + - minimum: 97 + maximum: 115 + - const: 127 + + adi,unlock-trigger-sec: + description: + Defines the time in which the second unlock event must occur after the + first unlock event has occurred. + maximum: 7 + default: 0 + + adi,reset1-events: + description: + Defines the trigger events (key/gpi presses) that can generate reset + conditions one the reset1 block. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + + adi,reset2-events: + description: + Defines the trigger events (key/gpi presses) that can generate reset + conditions one the reset2 block. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + + adi,reset1-active-high: + description: Sets the reset1 signal as active high. + type: boolean + + adi,reset2-active-high: + description: Sets the reset2 signal as active high. + type: boolean + + adi,rst-passthrough-enable: + description: Allows the RST pin to override (OR with) the reset1 signal. + type: boolean + + adi,reset-trigger-ms: + description: + Defines the length of time that the reset events must be active before a + reset signal is generated. All events must be active at the same time for + the same duration. + enum: [0, 1000, 1500, 2000, 2500, 3000, 3500, 4000] + default: 0 + + adi,reset-pulse-width-us: + description: Defines the pulse width of the reset signals. + enum: [500, 1000, 2000, 10000] + default: 500 + patternProperties: "-hog(-[0-9]+)?$": type: object @@ -49,14 +137,28 @@ patternProperties: required: - gpio-hog +dependencies: + linux,keymap: + - adi,keypad-pins + - interrupts + interrupt-controller: + - interrupts + adi,unlock-trigger-sec: + - adi,unlock-events + adi,reset1-active-high: + - adi,reset1-events + adi,rst-passtrough-enable: + - adi,reset1-events + adi,reset2-active-high: + - adi,reset2-events + required: - compatible - reg - - gpio-controller - - "#gpio-cells" - - "#pwm-cells" allOf: + - $ref: /schemas/input/matrix-keymap.yaml# + - $ref: /schemas/input/input.yaml# - if: properties: compatible: @@ -64,9 +166,60 @@ allOf: const: adi,adp5585-01 then: properties: + adi,unlock-events: false + adi,unlock-trigger-sec: false gpio-reserved-ranges: false - else: + reset-gpios: false + adi,keypad-pins: + minItems: 2 + maxItems: 11 + items: + minimum: 0 + maximum: 10 + adi,reset1-events: + items: + anyOf: + - minimum: 1 + maximum: 30 + - minimum: 37 + maximum: 47 + adi,reset2-events: + items: + anyOf: + - minimum: 1 + maximum: 30 + - minimum: 37 + maximum: 47 + - if: properties: + compatible: + contains: + enum: + - adi,adp5585-00 + - adi,adp5585-02 + - adi,adp5585-03 + - adi,adp5585-04 + then: + properties: + adi,unlock-events: false + adi,unlock-trigger-sec: false + adi,keypad-pins: + minItems: 2 + maxItems: 10 + items: + enum: [0, 1, 2, 3, 4, 6, 7, 8, 9, 10] + adi,reset1-events: + items: + anyOf: + - minimum: 1 + maximum: 25 + - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47] + adi,reset2-events: + items: + anyOf: + - minimum: 1 + maximum: 25 + - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47] gpio-reserved-ranges: maxItems: 1 items: @@ -74,10 +227,44 @@ allOf: - const: 5 - const: 1 -additionalProperties: false + - if: + properties: + compatible: + contains: + enum: + - adi,adp5589-00 + - adi,adp5589-01 + - adi,adp5589-02 + then: + properties: + gpio-reserved-ranges: false + adi,keypad-pins: + minItems: 2 + maxItems: 19 + items: + minimum: 0 + maximum: 18 + adi,reset1-events: + items: + anyOf: + - minimum: 1 + maximum: 88 + - minimum: 97 + maximum: 115 + adi,reset2-events: + items: + anyOf: + - minimum: 1 + maximum: 88 + - minimum: 97 + maximum: 115 + +unevaluatedProperties: false examples: - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -93,6 +280,33 @@ examples: gpio-reserved-ranges = <5 1>; #pwm-cells = <3>; + + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,reset1-events = <1 43>; + adi,reset2-events = <2 3>; + adi,reset-trigger-ms = <2000>; + + /* + * col0, col1, col2 + * row0, row1, row2 + */ + adi,keypad-pins = <0 1 2 6 7 8>; + + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + + MATRIX_KEY(0x01, 0x00, KEY_A) + MATRIX_KEY(0x01, 0x01, KEY_B) + MATRIX_KEY(0x01, 0x02, KEY_C) + + MATRIX_KEY(0x02, 0x00, BTN_1) + MATRIX_KEY(0x02, 0x01, BTN_2) + MATRIX_KEY(0x02, 0x02, BTN_3) + >; }; }; diff --git a/Documentation/devicetree/bindings/mfd/apple,smc.yaml b/Documentation/devicetree/bindings/mfd/apple,smc.yaml new file mode 100644 index 000000000000..8a10e270d421 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/apple,smc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/apple,smc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Mac System Management Controller + +maintainers: + - Sven Peter <sven@kernel.org> + +description: + Apple Mac System Management Controller implements various functions + such as GPIO, RTC, power, reboot. + +properties: + compatible: + items: + - enum: + - apple,t6000-smc + - apple,t8103-smc + - apple,t8112-smc + - const: apple,smc + + reg: + items: + - description: SMC area + - description: SRAM area + + reg-names: + items: + - const: smc + - const: sram + + mboxes: + maxItems: 1 + + gpio: + $ref: /schemas/gpio/apple,smc-gpio.yaml + + reboot: + $ref: /schemas/power/reset/apple,smc-reboot.yaml + +additionalProperties: false + +required: + - compatible + - reg + - reg-names + - mboxes + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + smc@23e400000 { + compatible = "apple,t8103-smc", "apple,smc"; + reg = <0x2 0x3e400000 0x0 0x4000>, + <0x2 0x3fe00000 0x0 0x100000>; + reg-names = "smc", "sram"; + mboxes = <&smc_mbox>; + + smc_gpio: gpio { + compatible = "apple,smc-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + reboot { + compatible = "apple,smc-reboot"; + nvmem-cells = <&shutdown_flag>, <&boot_stage>, + <&boot_error_count>, <&panic_count>; + nvmem-cell-names = "shutdown_flag", "boot_stage", + "boot_error_count", "panic_count"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt index e8591d6b11b4..ca5324ed0df4 100644 --- a/Documentation/devicetree/bindings/mfd/lp3943.txt +++ b/Documentation/devicetree/bindings/mfd/lp3943.txt @@ -7,7 +7,7 @@ Required properties: LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. For the LP3943 GPIO properties please refer to: -Documentation/devicetree/bindings/gpio/gpio-lp3943.txt +Documentation/devicetree/bindings/gpio/trivial-gpio.yaml For the LP3943 PWM properties please refer to: Documentation/devicetree/bindings/pwm/pwm-lp3943.txt diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml index 6341b6070366..a48cb00afe43 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml @@ -22,6 +22,7 @@ properties: - ti,tps6593-q1 - ti,tps6594-q1 - ti,tps65224-q1 + - ti,tps652g1 reg: description: I2C slave address or SPI chip select number. diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.yaml b/Documentation/devicetree/bindings/mips/brcm/soc.yaml index 0cc634482a6a..461a8c063313 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.yaml +++ b/Documentation/devicetree/bindings/mips/brcm/soc.yaml @@ -92,29 +92,29 @@ additionalProperties: true examples: - | - / { - compatible = "brcm,bcm3368"; - #address-cells = <1>; - #size-cells = <1>; - model = "Broadcom 3368"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - mips-hpt-frequency = <150000000>; - - cpu@0 { - compatible = "brcm,bmips4350"; - device_type = "cpu"; - reg = <0>; - }; - - cpu@1 { - compatible = "brcm,bmips4350"; - device_type = "cpu"; - reg = <1>; - }; - }; - }; + / { + compatible = "brcm,bcm3368"; + #address-cells = <1>; + #size-cells = <1>; + model = "Broadcom 3368"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <150000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <1>; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index 36a9dbdf3f03..aab89946b04f 100644 --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -45,7 +45,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> qmgr: queue-manager@60000000 { - compatible = "intel,ixp4xx-ahb-queue-manager"; - reg = <0x60000000 0x4000>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml index cacb845868f4..87fcce7cbb40 100644 --- a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml @@ -20,6 +20,7 @@ properties: - nvidia,tegra186-misc - nvidia,tegra194-misc - nvidia,tegra234-misc + - nvidia,tegra264-misc reg: items: diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml new file mode 100644 index 000000000000..2f9a7a554ed8 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/pci1de4,1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 MFD PCI device + +maintainers: + - A. della Porta <andrea.porta@suse.com> + +description: + The RaspberryPi RP1 is a PCI multi function device containing + peripherals ranging from Ethernet to USB controller, I2C, SPI + and others. + The peripherals are accessed by addressing the PCI BAR1 region. + +allOf: + - $ref: /schemas/pci/pci-ep-bus.yaml + +properties: + compatible: + additionalItems: true + maxItems: 3 + items: + - const: pci1de4,1 + + '#interrupt-cells': + const: 2 + description: | + Specifies respectively the interrupt number and flags as defined + in include/dt-bindings/interrupt-controller/irq.h. + Since all interrupts are active high, only IRQ_TYPE_LEVEL_HIGH + and IRQ_TYPE_EDGE_RISING can be specified as type flags. + The supported values for the interrupt number are: + - IO BANK0: 0 + - IO BANK1: 1 + - IO BANK2: 2 + - AUDIO IN: 3 + - AUDIO OUT: 4 + - PWM0: 5 + - ETH: 6 + - I2C0: 7 + - I2C1: 8 + - I2C2: 9 + - I2C3: 10 + - I2C4: 11 + - I2C5: 12 + - I2C6: 13 + - I2S0: 14 + - I2S1: 15 + - I2S2: 16 + - SDIO0: 17 + - SDIO1: 18 + - SPI0: 19 + - SPI1: 20 + - SPI2: 21 + - SPI3: 22 + - SPI4: 23 + - SPI5: 24 + - UART0: 25 + - TIMER0: 26 + - TIMER1: 27 + - TIMER2: 28 + - TIMER3: 29 + - USB HOST0: 30 + - USB HOST0-0: 31 + - USB HOST0-1: 32 + - USB HOST0-2: 33 + - USB HOST0-3: 34 + - USB HOST1: 35 + - USB HOST1-0: 36 + - USB HOST1-1: 37 + - USB HOST1-2: 38 + - USB HOST1-3: 39 + - DMA: 40 + - PWM1: 41 + - UART1: 42 + - UART2: 43 + - UART3: 44 + - UART4: 45 + - UART5: 46 + - MIPI0: 47 + - MIPI1: 48 + - VIDEO OUT: 49 + - PIO0: 50 + - PIO1: 51 + - ADC FIFO: 52 + - PCIE OUT: 53 + - SPI6: 54 + - SPI7: 55 + - SPI8: 56 + - PROC MISC: 57 + - SYSCFG: 58 + - CLOCKS DEFAULT: 59 + - VBUSCTRL: 60 + + interrupt-controller: true + +unevaluatedProperties: false + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + - pci-ep-bus@1 + +examples: + - | + pci { + #address-cells = <3>; + #size-cells = <2>; + + rp1@0,0 { + compatible = "pci1de4,1"; + ranges = <0x01 0x00 0x00000000 0x82010000 0x00 0x00 0x00 0x400000>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + pci_ep_bus: pci-ep-bus@1 { + compatible = "simple-bus"; + ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; + dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@40018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0x00 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index 0432cc96f7ca..ac75d694611a 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -16,6 +16,7 @@ properties: - amd,pensando-elba-sd4hc - microchip,mpfs-sd4hc - microchip,pic64gx-sd4hc + - mobileye,eyeq-sd4hc - socionext,uniphier-sd4hc - const: cdns,sd4hc diff --git a/Documentation/devicetree/bindings/mmc/loongson,ls2k0500-mmc.yaml b/Documentation/devicetree/bindings/mmc/loongson,ls2k0500-mmc.yaml new file mode 100644 index 000000000000..c142421bc723 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/loongson,ls2k0500-mmc.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/loongson,ls2k0500-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The SD/SDIO/eMMC host controller for Loongson-2K family SoCs + +description: + The MMC host controller on the Loongson-2K0500/2K1000 (using an externally + shared apbdma controller) provides the SD and SDIO device interfaces. + The two MMC host controllers on the Loongson-2K2000 are similar, + except that they use internal exclusive DMA. one controller provides + the eMMC interface and the other provides the SD/SDIO interface. + +maintainers: + - Binbin Zhou <zhoubinbin@loongson.cn> + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + enum: + - loongson,ls2k0500-mmc + - loongson,ls2k1000-mmc + - loongson,ls2k2000-mmc + + reg: + minItems: 1 + items: + - description: Loongson-2K MMC controller registers. + - description: APB DMA config register for Loongson-2K MMC controller. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +if: + properties: + compatible: + contains: + enum: + - loongson,ls2k0500-mmc + - loongson,ls2k1000-mmc + +then: + properties: + reg: + minItems: 2 + + required: + - dmas + - dma-names + +else: + properties: + reg: + maxItems: 1 + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/loongson,ls2k-clk.h> + + mmc@1fe2c000 { + compatible = "loongson,ls2k1000-mmc"; + reg = <0x1fe2c000 0x68>, + <0x1fe00438 0x8>; + interrupt-parent = <&liointc0>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + dmas = <&apbdma1 0>; + dma-names = "rx-tx"; + bus-width = <4>; + cd-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/loongson,ls2k-clk.h> + + mmc@79990000 { + compatible = "loongson,ls2k2000-mmc"; + reg = <0x79990000 0x1000>; + interrupt-parent = <&pic>; + interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_EMMC_CLK>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-hs200-1_8v; + no-sd; + no-sdio; + }; diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml index 32e512a68ed6..df07ea3b81d1 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml @@ -17,7 +17,7 @@ description: | and the properties used by the mxsmmc driver. allOf: - - $ref: mmc-controller.yaml + - $ref: mmc-controller-common.yaml# properties: compatible: @@ -31,6 +31,9 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + dmas: maxItems: 1 @@ -41,6 +44,7 @@ required: - compatible - reg - interrupts + - clocks - dmas - dma-names @@ -52,6 +56,7 @@ examples: compatible = "fsl,imx28-mmc"; reg = <0x80010000 2000>; interrupts = <96>; + clocks = <&clks 46>; dmas = <&dma_apbh 0>; dma-names = "rx-tx"; bus-width = <8>; diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 7563623876fc..c754ea71f51f 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -72,6 +72,8 @@ properties: - enum: - renesas,sdhi-r9a09g047 # RZ/G3E - renesas,sdhi-r9a09g056 # RZ/V2N + - renesas,sdhi-r9a09g077 # RZ/T2H + - renesas,sdhi-r9a09g087 # RZ/N2H - const: renesas,sdhi-r9a09g057 # RZ/V2H(P) reg: @@ -129,59 +131,78 @@ allOf: compatible: contains: enum: - - renesas,sdhi-r9a09g057 - - renesas,rzg2l-sdhi + - renesas,sdhi-r9a09g077 + - renesas,sdhi-r9a09g087 then: properties: + resets: false clocks: items: - - description: IMCLK, SDHI channel main clock1. - - description: CLK_HS, SDHI channel High speed clock which operates - 4 times that of SDHI channel main clock1. - - description: IMCLK2, SDHI channel main clock2. When this clock is - turned off, external SD card detection cannot be - detected. - - description: ACLK, SDHI channel bus clock. + - description: ACLK, IMCLK, SDHI channel bus and main clocks. + - description: CLK_HS, SDHI channel High speed clock. clock-names: items: - - const: core - - const: clkh - - const: cd - const: aclk - required: - - clock-names - - resets + - const: clkh else: if: properties: compatible: contains: enum: - - renesas,rcar-gen2-sdhi - - renesas,rcar-gen3-sdhi - - renesas,rcar-gen4-sdhi + - renesas,sdhi-r9a09g057 + - renesas,rzg2l-sdhi then: properties: clocks: - minItems: 1 - maxItems: 3 - clock-names: - minItems: 1 - uniqueItems: true items: - - const: core - - enum: [ clkh, cd ] - - const: cd - else: - properties: - clocks: - minItems: 1 - maxItems: 2 + - description: IMCLK, SDHI channel main clock1. + - description: CLK_HS, SDHI channel High speed clock which operates + 4 times that of SDHI channel main clock1. + - description: IMCLK2, SDHI channel main clock2. When this clock is + turned off, external SD card detection cannot be + detected. + - description: ACLK, SDHI channel bus clock. clock-names: - minItems: 1 items: - const: core + - const: clkh - const: cd + - const: aclk + required: + - clock-names + - resets + else: + if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-sdhi + - renesas,rcar-gen3-sdhi + - renesas,rcar-gen4-sdhi + then: + properties: + clocks: + minItems: 1 + maxItems: 3 + clock-names: + minItems: 1 + uniqueItems: true + items: + - const: core + - enum: [ clkh, cd ] + - const: cd + else: + properties: + clocks: + minItems: 1 + maxItems: 2 + clock-names: + minItems: 1 + items: + - const: core + - const: cd - if: properties: @@ -245,49 +266,49 @@ examples: #include <dt-bindings/power/r8a7790-sysc.h> sdhi0: mmc@ee100000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0xee100000 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 314>; + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee100000 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; }; sdhi1: mmc@ee120000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0xee120000 0x328>; - interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 313>; - dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 313>; + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee120000 0x328>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; }; sdhi2: mmc@ee140000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0xee140000 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 312>; - }; + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee140000 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; + }; - sdhi3: mmc@ee160000 { - compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; - reg = <0xee160000 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 311>; + sdhi3: mmc@ee160000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0xee160000 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 2b2cbce2458b..22d1f50c3fd1 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -42,9 +42,11 @@ properties: - qcom,ipq5424-sdhci - qcom,ipq6018-sdhci - qcom,ipq9574-sdhci + - qcom,milos-sdhci - qcom,qcm2290-sdhci - qcom,qcs404-sdhci - qcom,qcs615-sdhci + - qcom,qcs8300-sdhci - qcom,qdu1000-sdhci - qcom,sar2130p-sdhci - qcom,sc7180-sdhci diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml index 4869ddef36fd..e7c06032048a 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml @@ -30,6 +30,26 @@ allOf: maxItems: 1 reg-names: maxItems: 1 + - if: + properties: + compatible: + contains: + const: mrvl,pxav1-mmc + then: + properties: + pinctrl-names: + description: + Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between + SDIO CMD and GPIO mode. + items: + - const: default + - const: state_cmd_gpio + pinctrl-0: + description: + Should contain default pinctrl. + pinctrl-1: + description: + Should switch CMD pin to GPIO mode as a high output. properties: compatible: @@ -62,22 +82,6 @@ properties: - const: io - const: core - pinctrl-names: - description: - Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between - SDIO CMD and GPIO mode. - items: - - const: default - - const: state_cmd_gpio - - pinctrl-0: - description: - Should contain default pinctrl. - - pinctrl-1: - description: - Should switch CMD pin to GPIO mode as a high output. - mrvl,clk-delay-cycles: description: Specify a number of cycles to delay for tuning. $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/mtd/technologic,nand.yaml b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml index f9d87c46094b..a3c316436317 100644 --- a/Documentation/devicetree/bindings/mtd/technologic,nand.yaml +++ b/Documentation/devicetree/bindings/mtd/technologic,nand.yaml @@ -40,6 +40,6 @@ examples: #address-cells = <1>; #size-cells = <0>; nand@0 { - reg = <0>; + reg = <0>; }; }; diff --git a/Documentation/devicetree/bindings/net/marvell,armada-370-neta.yaml b/Documentation/devicetree/bindings/net/marvell,armada-370-neta.yaml new file mode 100644 index 000000000000..8814977da024 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,armada-370-neta.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,armada-370-neta.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 370/XP/3700/AC5 Ethernet Controller (NETA) + +maintainers: + - Marcin Wojtas <marcin.s.wojtas@gmail.com> + +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + +properties: + compatible: + enum: + - marvell,armada-370-neta + - marvell,armada-xp-neta + - marvell,armada-3700-neta + - marvell,armada-ac5-neta + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: bus + + phys: + maxItems: 1 + + tx-csum-limit: + description: Maximum MTU in bytes for Tx checksum offload; default is 1600 for + armada-370-neta and 9800 for others. + $ref: /schemas/types.yaml#/definitions/uint32 + + buffer-manager: + description: Phandle to hardware buffer manager. + $ref: /schemas/types.yaml#/definitions/phandle + + bm,pool-long: + description: Pool ID for packets larger than the short threshold. + $ref: /schemas/types.yaml#/definitions/uint32 + + bm,pool-short: + description: Pool ID for packets smaller than the long threshold. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x2500>; + interrupts = <8>; + clocks = <&gate_clk 4>; + tx-csum-limit = <9800>; + phy = <&phy0>; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + }; diff --git a/Documentation/devicetree/bindings/net/marvell,armada-380-neta-bm.yaml b/Documentation/devicetree/bindings/net/marvell,armada-380-neta-bm.yaml new file mode 100644 index 000000000000..9392e7126e3e --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,armada-380-neta-bm.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,armada-380-neta-bm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 380/XP Buffer Manager (BM) + +maintainers: + - Marcin Wojtas <marcin.s.wojtas@gmail.com> + +description: + In order to see how to hook the BM to a given ethernet port, please refer to + Documentation/devicetree/bindings/net/marvell,armada-370-neta.yaml. + +properties: + compatible: + const: marvell,armada-380-neta-bm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + internal-mem: + description: Phandle to internal SRAM region + $ref: /schemas/types.yaml#/definitions/phandle + +patternProperties: + "^pool[0-3],capacity$": + description: + size of external buffer pointers' ring maintained in DRAM for pool 0-3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 128 + maximum: 16352 + + "^pool[0-3],pkt-size$": + description: + maximum packet size for a short buffer pool entry (pool 0-3) + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - internal-mem + +additionalProperties: false + +examples: + - | + bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + pool2,capacity = <4096>; + pool1,pkt-size = <512>; + }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt deleted file mode 100644 index 2bf31572b08d..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA) - -Required properties: -- compatible: could be one of the following: - "marvell,armada-370-neta" - "marvell,armada-xp-neta" - "marvell,armada-3700-neta" - "marvell,armada-ac5-neta" -- reg: address and length of the register set for the device. -- interrupts: interrupt for the device -- phy: See ethernet.txt file in the same directory. -- phy-mode: See ethernet.txt file in the same directory -- clocks: List of clocks for this device. At least one clock is - mandatory for the core clock. If several clocks are given, then the - clock-names property must be used to identify them. - -Optional properties: -- tx-csum-limit: maximum mtu supported by port that allow TX checksum. - Value is presented in bytes. If not used, by default 1600B is set for - "marvell,armada-370-neta" and 9800B for others. -- clock-names: List of names corresponding to clocks property; shall be - "core" for core clock and "bus" for the optional bus clock. -- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt - -Optional properties (valid only for Armada XP/38x): - -- buffer-manager: a phandle to a buffer manager node. Please refer to - Documentation/devicetree/bindings/net/marvell-neta-bm.txt -- bm,pool-long: ID of a pool, that will accept all packets of a size - higher than 'short' pool's threshold (if set) and up to MTU value. - Obligatory, when the port is supposed to use hardware - buffer management. -- bm,pool-short: ID of a pool, that will be used for accepting - packets of a size lower than given threshold. If not set, the port - will use a single 'long' pool for all packets, as defined above. - -Example: - -ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x2500>; - interrupts = <8>; - clocks = <&gate_clk 4>; - tx-csum-limit = <9800> - phy = <&phy0>; - phy-mode = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; -}; diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt deleted file mode 100644 index 07b31050dbe5..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Marvell Armada 380/XP Buffer Manager driver (BM) - -Required properties: - -- compatible: should be "marvell,armada-380-neta-bm". -- reg: address and length of the register set for the device. -- clocks: a pointer to the reference clock for this device. -- internal-mem: a phandle to BM internal SRAM definition. - -Optional properties (port): - -- pool<0 : 3>,capacity: size of external buffer pointers' ring maintained - in DRAM. Can be set for each pool (id 0 : 3) separately. The value has - to be chosen between 128 and 16352 and it also has to be aligned to 32. - Otherwise the driver would adjust a given number or choose default if - not set. -- pool<0 : 3>,pkt-size: maximum size of a packet accepted by a given buffer - pointers' pool (id 0 : 3). It will be taken into consideration only when pool - type is 'short'. For 'long' ones it would be overridden by port's MTU. - If not set a driver will choose a default value. - -In order to see how to hook the BM to a given ethernet port, please -refer to Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt. - -Example: - -- main node: - -bm: bm@c8000 { - compatible = "marvell,armada-380-neta-bm"; - reg = <0xc8000 0xac>; - clocks = <&gateclk 13>; - internal-mem = <&bm_bppi>; - pool2,capacity = <4096>; - pool1,pkt-size = <512>; -}; - -- internal SRAM node: - -bm_bppi: bm-bppi { - compatible = "mmio-sram"; - reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; - ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&gateclk 13>; -}; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml index 4424c3c5e75c..f67470b8a2ed 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -27,6 +27,7 @@ properties: - enum: - allwinner,sun50i-a100-sid - allwinner,sun50i-h616-sid + - allwinner,sun55i-a523-sid - const: allwinner,sun50i-a64-sid - const: allwinner,sun50i-h5-sid - const: allwinner,sun50i-h6-sid diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml index b5cf740f96fa..9879d521842e 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml @@ -53,6 +53,6 @@ examples: }; temperature_calib: calib@1f4 { - reg = <0x1f4 0x4>; + reg = <0x1f4 0x4>; }; }; diff --git a/Documentation/devicetree/bindings/nvmem/fsl,vf610-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,vf610-ocotp.yaml new file mode 100644 index 000000000000..5aef86a752a6 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/fsl,vf610-ocotp.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/fsl,vf610-ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: On-Chip OTP Memory for Freescale Vybrid + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +allOf: + - $ref: nvmem.yaml# + - $ref: nvmem-deprecated-cells.yaml + +properties: + compatible: + items: + - enum: + - fsl,vf610-ocotp + - const: syscon + + reg: + maxItems: 1 + + clocks: + items: + - description: ipg clock we associate with the OCOTP peripheral + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/vf610-clock.h> + + ocotp@400a5000 { + compatible = "fsl,vf610-ocotp", "syscon"; + reg = <0x400a5000 0xcf0>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks VF610_CLK_OCOTP>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml index 9bd34bd5af30..b01567f99284 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml @@ -27,7 +27,7 @@ properties: const: 1 patternProperties: - "@[a-f0-9]+$": + "@[a-f0-9]+(,[0-7])?$": type: object $ref: fixed-cell.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt b/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt deleted file mode 100644 index 809df68f6e14..000000000000 --- a/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt +++ /dev/null @@ -1,28 +0,0 @@ -* NXP LPC18xx EEPROM memory NVMEM driver - -Required properties: - - compatible: Should be "nxp,lpc1857-eeprom" - - reg: Must contain an entry with the physical base address and length - for each entry in reg-names. - - reg-names: Must include the following entries. - - reg: EEPROM registers. - - mem: EEPROM address space. - - clocks: Must contain an entry for each entry in clock-names. - - clock-names: Must include the following entries. - - eeprom: EEPROM operating clock. - - resets: Should contain a reference to the reset controller asserting - the EEPROM in reset. - - interrupts: Should contain EEPROM interrupt. - -Example: - - eeprom: eeprom@4000e000 { - compatible = "nxp,lpc1857-eeprom"; - reg = <0x4000e000 0x1000>, - <0x20040000 0x4000>; - reg-names = "reg", "mem"; - clocks = <&ccu1 CLK_CPU_EEPROM>; - clock-names = "eeprom"; - resets = <&rgu 27>; - interrupts = <4>; - }; diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index 32b8c1eb4e80..4dc0d42df3e6 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -25,6 +25,21 @@ properties: compatible: oneOf: - items: + - const: mediatek,mt8188-efuse + - const: mediatek,mt8186-efuse + - const: mediatek,mt8186-efuse + + - items: + - enum: + - mediatek,mt8186-efuse + - mediatek,mt8188-efuse + - const: mediatek,efuse + deprecated: true + description: Some compatibles also imply a decoding scheme for the + "gpu-speedbin" cell, and thus are not backward compatible to the + generic "mediatek,efuse" compatible. + + - items: - enum: - mediatek,mt7622-efuse - mediatek,mt7623-efuse @@ -33,8 +48,6 @@ properties: - mediatek,mt7988-efuse - mediatek,mt8173-efuse - mediatek,mt8183-efuse - - mediatek,mt8186-efuse - - mediatek,mt8188-efuse - mediatek,mt8192-efuse - mediatek,mt8195-efuse - mediatek,mt8516-efuse diff --git a/Documentation/devicetree/bindings/nvmem/nxp,lpc1857-eeprom.yaml b/Documentation/devicetree/bindings/nvmem/nxp,lpc1857-eeprom.yaml new file mode 100644 index 000000000000..24c71252846f --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nxp,lpc1857-eeprom.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nxp,lpc1857-eeprom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC18xx EEPROM memory + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc1857-eeprom + + reg: + maxItems: 2 + + reg-names: + items: + - const: reg + - const: mem + + clocks: + maxItems: 1 + + clock-names: + items: + - const: eeprom + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + + eeprom@4000e000 { + compatible = "nxp,lpc1857-eeprom"; + reg = <0x4000e000 0x1000>, + <0x20040000 0x4000>; + reg-names = "reg", "mem"; + clocks = <&ccu1 CLK_CPU_EEPROM>; + clock-names = "eeprom"; + resets = <&rgu 27>; + interrupts = <4>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt deleted file mode 100644 index 72ba628f6d0b..000000000000 --- a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt +++ /dev/null @@ -1,19 +0,0 @@ -On-Chip OTP Memory for Freescale Vybrid - -Required Properties: - compatible: - - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx - #address-cells : Should be 1 - #size-cells : Should be 1 - reg : Address and length of OTP controller and fuse map registers - clocks : ipg clock we associate with the OCOTP peripheral - -Example for Vybrid VF5xx/VF6xx: - - ocotp: ocotp@400a5000 { - compatible = "fsl,vf610-ocotp", "syscon"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x400a5000 0xCF0>; - clocks = <&clks VF610_CLK_OCOTP>; - }; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index 97f2579ea908..29580cbd1767 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -123,21 +123,21 @@ examples: #size-cells = <2>; pcie0_ep: pcie-ep@d000000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02900000 0x00 0x1000>, - <0x00 0x02907000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x10000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 239 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - dma-coherent; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - }; + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; }; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt deleted file mode 100644 index 85d9b95234f7..000000000000 --- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +++ /dev/null @@ -1,68 +0,0 @@ -* AppliedMicro X-Gene v1 PCIe MSI controller - -Required properties: - -- compatible: should be "apm,xgene1-msi" to identify - X-Gene v1 PCIe MSI controller block. -- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node -- reg: physical base address (0x79000000) and length (0x900000) for controller - registers. These registers include the MSI termination address and data - registers as well as the MSI interrupt status registers. -- reg-names: not required -- interrupts: A list of 16 interrupt outputs of the controller, starting from - interrupt number 0x10 to 0x1f. -- interrupt-names: not required - -Each PCIe node needs to have property msi-parent that points to an MSI -controller node - -Examples: - -SoC DTSI: - - + MSI node: - msi@79000000 { - compatible = "apm,xgene1-msi"; - msi-controller; - reg = <0x00 0x79000000 0x0 0x900000>; - interrupts = <0x0 0x10 0x4> - <0x0 0x11 0x4> - <0x0 0x12 0x4> - <0x0 0x13 0x4> - <0x0 0x14 0x4> - <0x0 0x15 0x4> - <0x0 0x16 0x4> - <0x0 0x17 0x4> - <0x0 0x18 0x4> - <0x0 0x19 0x4> - <0x0 0x1a 0x4> - <0x0 0x1b 0x4> - <0x0 0x1c 0x4> - <0x0 0x1d 0x4> - <0x0 0x1e 0x4> - <0x0 0x1f 0x4>; - }; - - + PCIe controller node with msi-parent property pointing to MSI node: - pcie0: pcie@1f2b0000 { - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ - 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; - dma-coherent; - clocks = <&pcie0clk 0>; - msi-parent= <&msi>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml new file mode 100644 index 000000000000..eec9a9b58542 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule + +maintainers: + - A. della Porta <andrea.porta@suse.com> + +description: + The RP1 chipset is a Multi Function Device containing, among other + sub-peripherals, a gpio/pinconf/mux controller whose 54 pins are grouped + into 3 banks. + It works also as an interrupt controller for those gpios. + +properties: + compatible: + const: raspberrypi,rp1-gpio + + reg: + maxItems: 3 + description: One reg specifier for each one of the 3 pin banks. + + '#gpio-cells': + description: The first cell is the pin number and the second cell is used + to specify the flags (see include/dt-bindings/gpio/gpio.h). + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + gpio-line-names: + maxItems: 54 + + interrupts: + maxItems: 3 + description: One interrupt specifier for each one of the 3 pin banks. + + '#interrupt-cells': + description: + Specifies the Bank number [0, 1, 2] and Flags as defined in + include/dt-bindings/interrupt-controller/irq.h. + const: 2 + + interrupt-controller: true + +patternProperties: + '-state$': + oneOf: + - $ref: '#/$defs/raspberrypi-rp1-state' + - patternProperties: + '-pins$': + $ref: '#/$defs/raspberrypi-rp1-state' + additionalProperties: false + +$defs: + raspberrypi-rp1-state: + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: '^gpio([0-9]|[1-4][0-9]|5[0-3])$' + + function: + enum: [ alt0, alt1, alt2, alt3, alt4, gpio, alt6, alt7, alt8, none, + aaud, dcd0, dpi, dsi0_te_ext, dsi1_te_ext, dsr0, dtr0, gpclk0, + gpclk1, gpclk2, gpclk3, gpclk4, gpclk5, i2c0, i2c1, i2c2, i2c3, + i2c4, i2c5, i2c6, i2s0, i2s1, i2s2, ir, mic, pcie_clkreq_n, + pio, proc_rio, pwm0, pwm1, ri0, sd0, sd1, spi0, spi1, spi2, + spi3, spi4, spi5, spi6, spi7, spi8, uart0, uart1, uart2, uart3, + uart4, uart5, vbus0, vbus1, vbus2, vbus3 ] + + description: + Specify the alternative function to be configured for the specified + pins. + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + input-enable: true + input-schmitt-enable: true + output-enable: true + output-high: true + output-low: true + slew-rate: + description: 0 is slow slew rate, 1 is fast slew rate + enum: [ 0, 1 ] + drive-strength: + enum: [ 2, 4, 8, 12 ] + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - reg + - compatible + - '#gpio-cells' + - gpio-controller + - interrupts + - '#interrupt-cells' + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + rp1_gpio: pinctrl@c0400d0000 { + reg = <0xc0 0x400d0000 0x0 0xc000>, + <0xc0 0x400e0000 0x0 0xc000>, + <0xc0 0x400f0000 0x0 0xc000>; + compatible = "raspberrypi,rp1-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>; + gpio-line-names = + "ID_SDA", // GPIO0 + "ID_SCL", // GPIO1 + "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", + "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16", + "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21", + "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26", + "GPIO27", + "PCIE_RP1_WAKE", // GPIO28 + "FAN_TACH", // GPIO29 + "HOST_SDA", // GPIO30 + "HOST_SCL", // GPIO31 + "ETH_RST_N", // GPIO32 + "", // GPIO33 + "CD0_IO0_MICCLK", // GPIO34 + "CD0_IO0_MICDAT0", // GPIO35 + "RP1_PCIE_CLKREQ_N", // GPIO36 + "", // GPIO37 + "CD0_SDA", // GPIO38 + "CD0_SCL", // GPIO39 + "CD1_SDA", // GPIO40 + "CD1_SCL", // GPIO41 + "USB_VBUS_EN", // GPIO42 + "USB_OC_N", // GPIO43 + "RP1_STAT_LED", // GPIO44 + "FAN_PWM", // GPIO45 + "CD1_IO0_MICCLK", // GPIO46 + "2712_WAKE", // GPIO47 + "CD1_IO1_MICDAT1", // GPIO48 + "EN_MAX_USB_CUR", // GPIO49 + "", // GPIO50 + "", // GPIO51 + "", // GPIO52 + ""; // GPIO53 + + rp1-i2s0-default-state { + function = "i2s0"; + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + bias-disable; + }; + + rp1-uart0-default-state { + txd-pins { + function = "uart0"; + pins = "gpio14"; + bias-disable; + }; + + rxd-pins { + function = "uart0"; + pins = "gpio15"; + bias-pull-up; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml index f578be6a3bc8..a28e75a9cb6a 100644 --- a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml +++ b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml @@ -16,8 +16,10 @@ description: properties: compatible: enum: - - allwinner,sun20i-d1-ppu - allwinner,sun8i-v853-ppu + - allwinner,sun20i-d1-ppu + - allwinner,sun55i-a523-pck-600 + - allwinner,sun55i-a523-ppu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index 8fdb529d560b..b1147dbf2e73 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic PM domains maintainers: - - Rafael J. Wysocki <rjw@rjwysocki.net> + - Rafael J. Wysocki <rafael@kernel.org> - Kevin Hilman <khilman@kernel.org> - Ulf Hansson <ulf.hansson@linaro.org> diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 1bf65f2a583a..af5fef872529 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -17,7 +17,9 @@ properties: compatible: oneOf: - enum: + - qcom,glymur-rpmhpd - qcom,mdm9607-rpmpd + - qcom,milos-rpmhpd - qcom,msm8226-rpmpd - qcom,msm8909-rpmpd - qcom,msm8916-rpmpd diff --git a/Documentation/devicetree/bindings/power/reset/apple,smc-reboot.yaml b/Documentation/devicetree/bindings/power/reset/apple,smc-reboot.yaml new file mode 100644 index 000000000000..ce5ed88493cd --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/apple,smc-reboot.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/apple,smc-reboot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SMC Reboot Controller + +description: + The Apple System Management Controller (SMC) provides reboot functionality + on Apple Silicon SoCs. It uses NVMEM cells to store and track various + system state information related to boot, shutdown, and panic events. + +maintainers: + - Sven Peter <sven@kernel.org> + +properties: + compatible: + const: apple,smc-reboot + + nvmem-cells: + items: + - description: Flag indicating shutdown (as opposed to reboot) + - description: Stage at which the boot process stopped (0x30 for normal boot) + - description: Counter for boot errors + - description: Counter for system panics + + nvmem-cell-names: + items: + - const: shutdown_flag + - const: boot_stage + - const: boot_error_count + - const: panic_count + +required: + - compatible + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index 3da3d02a6690..979a377cb4ff 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -115,40 +115,40 @@ allOf: examples: - | - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/input/linux-event-codes.h> - #include <dt-bindings/spmi/spmi.h> - - spmi@c440000 { - reg = <0x0c440000 0x1100>; - #address-cells = <2>; - #size-cells = <0>; - - pmic@0 { - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pon@800 { - compatible = "qcom,pm8998-pon"; - reg = <0x800>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_POWER>; - }; - - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - }; - }; + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/spmi/spmi.h> + + spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + + pmic@0 { + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml index f494b7710c09..a884e49c995f 100644 --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -40,6 +40,7 @@ properties: - rockchip,rk3366-power-controller - rockchip,rk3368-power-controller - rockchip,rk3399-power-controller + - rockchip,rk3528-power-controller - rockchip,rk3562-power-controller - rockchip,rk3568-power-controller - rockchip,rk3576-power-controller diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt deleted file mode 100644 index f8d2b7fe06d6..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Freescale MSI interrupt controller - -Required properties: -- compatible : compatible list, may contain one or two entries - The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, - etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or - "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic - version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is - provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3" - should be used. The first entry is optional; the second entry is - required. - -- reg : It may contain one or two regions. The first region should contain - the address and the length of the shared message interrupt register set. - The second region should contain the address of aliased MSIIR or MSIIR1 - register for platforms that have such an alias, if using MSIIR1, the second - region must be added because different MSI group has different MSIIR1 offset. - -- interrupts : each one of the interrupts here is one entry per 32 MSIs, - and routed to the host interrupt controller. the interrupts should - be set as edge sensitive. If msi-available-ranges is present, only - the interrupts that correspond to available ranges shall be present. - -Optional properties: -- msi-available-ranges: use <start count> style section to define which - msi interrupt can be used in the 256 msi interrupts. This property is - optional, without this, all the MSI interrupts can be used. - Each available range must begin and end on a multiple of 32 (i.e. - no splitting an individual MSI register or the associated PIC interrupt). - MPIC v4.3 does not support this property because the 32 interrupts of an - individual register are not continuous when using MSIIR1. - -- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register - is used for MSI messaging. The address of MSIIR in PCI address space is - the MSI message address. - - This property may be used in virtualized environments where the hypervisor - has created an alternate mapping for the MSIR block. See below for an - explanation. - - -Example: - msi@41600 { - compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - msi@41600 { - compatible = "fsl,mpic-msi-v4.3"; - reg = <0x41600 0x200 0x44148 4>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0 - 0x100 0 0 0 - 0x101 0 0 0 - 0x102 0 0 0 - 0x103 0 0 0 - 0x104 0 0 0 - 0x105 0 0 0 - 0x106 0 0 0 - 0x107 0 0 0>; - }; - -The Freescale hypervisor and msi-address-64 -------------------------------------------- -Normally, PCI devices have access to all of CCSR via an ATMU mapping. The -Freescale MSI driver calculates the address of MSIIR (in the MSI register -block) and sets that address as the MSI message address. - -In a virtualized environment, the hypervisor may need to create an IOMMU -mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement -because of hardware limitations of the Peripheral Access Management Unit -(PAMU), which is currently the only IOMMU that the hypervisor supports. -The ATMU is programmed with the guest physical address, and the PAMU -intercepts transactions and reroutes them to the true physical address. - -In the PAMU, each PCI controller is given only one primary window. The -PAMU restricts DMA operations so that they can only occur within a window. -Because PCI devices must be able to DMA to memory, the primary window must -be used to cover all of the guest's memory space. - -PAMU primary windows can be divided into 256 subwindows, and each -subwindow can have its own address mapping ("guest physical" to "true -physical"). However, each subwindow has to have the same alignment, which -means they cannot be located at just any address. Because of these -restrictions, it is usually impossible to create a 4KB subwindow that -covers MSIIR where it's normally located. - -Therefore, the hypervisor has to create a subwindow inside the same -primary window used for memory, but mapped to the MSIR block (where MSIIR -lives). The first subwindow after the end of guest memory is used for -this. The address specified in the msi-address-64 property is the PCI -address of MSIIR. The hypervisor configures the PAMU to map that address to -the true physical address of MSIIR. diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt index 6f69a9dfe198..df060a0d7d4a 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -139,10 +139,6 @@ Nintendo Wii device tree - interrupt-controller - interrupts : should contain the cascade interrupt of the "flipper" pic -1.l) The General Purpose I/O (GPIO) controller node - - see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt - 1.m) The control node Represents the control interface used to setup several miscellaneous diff --git a/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml b/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml index 5575c58357d6..e4c2d5186ded 100644 --- a/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml +++ b/Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml @@ -14,7 +14,7 @@ description: The Analog Devices AXI PWM generator can generate PWM signals with variable pulse width and period. - https://wiki.analog.com/resources/fpga/docs/axi_pwm_gen + https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html allOf: - $ref: pwm.yaml# diff --git a/Documentation/devicetree/bindings/pwm/argon40,fan-hat.yaml b/Documentation/devicetree/bindings/pwm/argon40,fan-hat.yaml new file mode 100644 index 000000000000..7dbc7c2cd802 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/argon40,fan-hat.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/argon40,fan-hat.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Argon40 Fan HAT PWM controller + +maintainers: + - Marek Vasut <marek.vasut+renesas@mailbox.org> + +description: + The trivial PWM on Argon40 Fan HAT, which is a RaspberryPi blower fan + hat which can be controlled over I2C, generates a fixed 30 kHz period + PWM signal with configurable 0..100% duty cycle to control the fan + speed. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: argon40,fan-hat + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pwm@1a { + compatible = "argon40,fan-hat"; + reg = <0x1a>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt deleted file mode 100644 index 43d9f4f08a2e..000000000000 --- a/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt +++ /dev/null @@ -1,20 +0,0 @@ -* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver - -Required properties: - - compatible: Should be "nxp,lpc1850-sct-pwm" - - reg: Should contain physical base address and length of pwm registers. - - clocks: Must contain an entry for each entry in clock-names. - See ../clock/clock-bindings.txt for details. - - clock-names: Must include the following entries. - - pwm: PWM operating clock. - - #pwm-cells: Should be 3. See pwm.yaml in this directory for the description - of the cells format. - -Example: - pwm: pwm@40000000 { - compatible = "nxp,lpc1850-sct-pwm"; - reg = <0x40000000 0x1000>; - clocks =<&ccu1 CLK_CPU_SCT>; - clock-names = "pwm"; - #pwm-cells = <3>; - }; diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt deleted file mode 100644 index 74b5bc5dd19a..000000000000 --- a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt +++ /dev/null @@ -1,17 +0,0 @@ -LPC32XX PWM controller - -Required properties: -- compatible: should be "nxp,lpc3220-pwm" -- reg: physical base address and length of the controller's registers - -Examples: - -pwm@4005c000 { - compatible = "nxp,lpc3220-pwm"; - reg = <0x4005c000 0x4>; -}; - -pwm@4005c004 { - compatible = "nxp,lpc3220-pwm"; - reg = <0x4005c004 0x4>; -}; diff --git a/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml index 9ee1946dc2e1..8df327e52810 100644 --- a/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml @@ -11,26 +11,47 @@ maintainers: allOf: - $ref: pwm.yaml# + - if: + properties: + compatible: + contains: + const: spacemit,k1-pwm + then: + properties: + "#pwm-cells": + const: 3 + else: + properties: + "#pwm-cells": + const: 1 + description: | + Used for specifying the period length in nanoseconds. properties: compatible: - enum: - - marvell,pxa250-pwm - - marvell,pxa270-pwm - - marvell,pxa168-pwm - - marvell,pxa910-pwm + oneOf: + - enum: + - marvell,pxa250-pwm + - marvell,pxa270-pwm + - marvell,pxa168-pwm + - marvell,pxa910-pwm + - items: + - const: spacemit,k1-pwm + - const: marvell,pxa910-pwm reg: # Length should be 0x10 maxItems: 1 "#pwm-cells": - # Used for specifying the period length in nanoseconds - const: 1 + description: Number of cells in a pwm specifier. clocks: maxItems: 1 + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml index d515c09e1021..fc31758a40b0 100644 --- a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml @@ -18,6 +18,7 @@ properties: - enum: - mediatek,mt2712-pwm - mediatek,mt6795-pwm + - mediatek,mt6991-pwm - mediatek,mt7622-pwm - mediatek,mt7623-pwm - mediatek,mt7628-pwm @@ -32,6 +33,10 @@ properties: - enum: - mediatek,mt8195-pwm - const: mediatek,mt8183-pwm + - items: + - enum: + - mediatek,mt8196-pwm + - const: mediatek,mt6991-pwm reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pwm/nxp,lpc1850-sct-pwm.yaml b/Documentation/devicetree/bindings/pwm/nxp,lpc1850-sct-pwm.yaml new file mode 100644 index 000000000000..ffda0123878e --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nxp,lpc1850-sct-pwm.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/nxp,lpc1850-sct-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC18xx State Configurable Timer + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc1850-sct-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pwm + + '#pwm-cells': + const: 3 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#pwm-cells' + +allOf: + - $ref: pwm.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + + pwm@40000000 { + compatible = "nxp,lpc1850-sct-pwm"; + reg = <0x40000000 0x1000>; + clocks =<&ccu1 CLK_CPU_SCT>; + clock-names = "pwm"; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/nxp,lpc3220-pwm.yaml b/Documentation/devicetree/bindings/pwm/nxp,lpc3220-pwm.yaml new file mode 100644 index 000000000000..d8ebb0735c96 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nxp,lpc3220-pwm.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/nxp,lpc3220-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32XX PWM controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - nxp,lpc3220-pwm + - nxp,lpc3220-motor-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#pwm-cells': + const: 3 + +required: + - compatible + - reg + - '#pwm-cells' + +allOf: + - $ref: pwm.yaml# + +unevaluatedProperties: false + +examples: + - | + pwm@4005c000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005c000 0x4>; + #pwm-cells = <3>; + }; + diff --git a/Documentation/devicetree/bindings/pwm/sophgo,sg2042-pwm.yaml b/Documentation/devicetree/bindings/pwm/sophgo,sg2042-pwm.yaml index bbb6326d47d7..e0e91aa237ec 100644 --- a/Documentation/devicetree/bindings/pwm/sophgo,sg2042-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/sophgo,sg2042-pwm.yaml @@ -17,7 +17,9 @@ allOf: properties: compatible: - const: sophgo,sg2042-pwm + enum: + - sophgo,sg2042-pwm + - sophgo,sg2044-pwm reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml index 704828687970..685ccf9cf4d4 100644 --- a/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml @@ -17,9 +17,11 @@ properties: compatible: enum: - mediatek,mt6873-dvfsrc-regulator + - mediatek,mt6893-dvfsrc-regulator - mediatek,mt8183-dvfsrc-regulator - mediatek,mt8192-dvfsrc-regulator - mediatek,mt8195-dvfsrc-regulator + - mediatek,mt8196-dvfsrc-regulator dvfsrc-vcore: description: DVFSRC-controlled SoC Vcore regulator diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index 4ffe5c3faea0..a5486c36830f 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -100,6 +100,15 @@ properties: PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such dvs(dynamic voltage scaling) property. + regulator-allowed-modes: + description: | + Buck regulator operating modes allowed. Valid values below. + Users should use the macros from dt-bindings/regulator/nxp,pca9450-regulator.h + 0 (PCA9450_BUCK_MODE_AUTO): Auto PFM/PWM mode + 1 (PCA9450_BUCK_MODE_FORCE_PWM): Forced PWM mode + items: + enum: [ 0, 1 ] + unevaluatedProperties: false additionalProperties: false @@ -143,6 +152,7 @@ allOf: examples: - | #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/nxp,pca9450-regulator.h> i2c { #address-cells = <1>; @@ -179,6 +189,8 @@ examples: regulator-max-microvolt = <3400000>; regulator-boot-on; regulator-always-on; + regulator-initial-mode = <PCA9450_BUCK_MODE_FORCE_PWM>; + regulator-allowed-modes = <PCA9450_BUCK_MODE_FORCE_PWM>; }; buck5: BUCK5 { regulator-name = "BUCK5"; @@ -186,6 +198,8 @@ examples: regulator-max-microvolt = <3400000>; regulator-boot-on; regulator-always-on; + regulator-allowed-modes = <PCA9450_BUCK_MODE_AUTO + PCA9450_BUCK_MODE_FORCE_PWM>; }; buck6: BUCK6 { regulator-name = "BUCK6"; diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 3a5a0a6cf5cc..4c5b0629aa3e 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -40,6 +40,7 @@ description: | For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19 For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob For PM7325, smps1 - smps8, ldo1 - ldo19 + For PM7550, smps1 - smps6, ldo1 - ldo23, bob For PM8005, smps1 - smps4 For PM8009, smps1 - smps2, ldo1 - ldo7 For PM8010, ldo1 - ldo7 @@ -53,6 +54,7 @@ description: | For PMI8998, bob For PMC8380, smps1 - smps8, ldo1 - lodo3 For PMR735A, smps1 - smps3, ldo1 - ldo7 + For PMR735B, ldo1 - ldo12 For PMX55, smps1 - smps7, ldo1 - ldo16 For PMX65, smps1 - smps8, ldo1 - ldo21 For PMX75, smps1 - smps10, ldo1 - ldo21 @@ -66,6 +68,7 @@ properties: - qcom,pm660-rpmh-regulators - qcom,pm660l-rpmh-regulators - qcom,pm7325-rpmh-regulators + - qcom,pm7550-rpmh-regulators - qcom,pm8005-rpmh-regulators - qcom,pm8009-rpmh-regulators - qcom,pm8009-1-rpmh-regulators @@ -87,6 +90,7 @@ properties: - qcom,pmm8155au-rpmh-regulators - qcom,pmm8654au-rpmh-regulators - qcom,pmr735a-rpmh-regulators + - qcom,pmr735b-rpmh-regulators - qcom,pmx55-rpmh-regulators - qcom,pmx65-rpmh-regulators - qcom,pmx75-rpmh-regulators @@ -222,6 +226,25 @@ allOf: properties: compatible: enum: + - qcom,pm7550-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l2-l3-supply: true + vdd-l4-l5-supply: true + vdd-l9-l10-supply: true + vdd-l12-l14-supply: true + vdd-l13-l16-supply: true + vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply: true + patternProperties: + "^vdd-l(1|[6-8]|11)-supply$": true + "^vdd-s[1-6]-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pm8005-rpmh-regulators then: patternProperties: @@ -428,6 +451,18 @@ allOf: properties: compatible: enum: + - qcom,pmr735b-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l7-l8-supply: true + patternProperties: + "^vdd-l([3-6]|9|1[0-2])-supply$": true + + - if: + properties: + compatible: + enum: - qcom,pmx55-rpmh-regulators then: properties: diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml index 41678400e63f..18944d39d08f 100644 --- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml @@ -12,14 +12,17 @@ maintainers: description: | The RaspberryPi 7" display has an ATTINY88-based regulator/backlight controller on the PCB, which is used to turn the display unit on/off - and control the backlight. + and control the backlight. The V2 supports 5" and 7" panels and also + offers PWM backlight control. allOf: - $ref: regulator.yaml# properties: compatible: - const: raspberrypi,7inch-touchscreen-panel-regulator + enum: + - raspberrypi,7inch-touchscreen-panel-regulator + - raspberrypi,touchscreen-panel-regulator-v2 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml index f9b2f0fdc282..4380f622f9a9 100644 --- a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml +++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml @@ -36,12 +36,13 @@ required: examples: - | reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - dram_cpu_bpmp_mail: shmem@f1be0000 { - compatible = "nvidia,tegra264-bpmp-shmem"; - reg = <0x0 0xf1be0000 0x0 0x2000>; - no-map; - }; + #address-cells = <2>; + #size-cells = <2>; + + shmem@f1be0000 { + compatible = "nvidia,tegra264-bpmp-shmem"; + reg = <0x0 0xf1be0000 0x0 0x2000>; + no-map; + }; }; ... diff --git a/Documentation/devicetree/bindings/reset/canaan,k230-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k230-rst.yaml new file mode 100644 index 000000000000..d352d0e12d81 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/canaan,k230-rst.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/canaan,k230-rst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan Kendryte K230 Reset Controller + +maintainers: + - Junhui Liu <junhui.liu@pigmoral.tech> + +description: + The Canaan Kendryte K230 reset controller is part of the SoC's system + controller and controls the reset registers for CPUs and various peripherals. + +properties: + compatible: + const: canaan,k230-rst + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset-controller@91101000 { + compatible = "canaan,k230-rst"; + reg = <0x91101000 0x1000>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt deleted file mode 100644 index 05d5be48dae4..000000000000 --- a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt +++ /dev/null @@ -1,83 +0,0 @@ -NXP LPC1850 Reset Generation Unit (RGU) -======================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "nxp,lpc1850-rgu" -- reg: register base and length -- clocks: phandle and clock specifier to RGU clocks -- clock-names: should contain "delay" and "reg" -- #reset-cells: should be 1 - -See table below for valid peripheral reset numbers. Numbers not -in the table below are either reserved or not applicable for -normal operation. - -Reset Peripheral - 9 System control unit (SCU) - 12 ARM Cortex-M0 subsystem core (LPC43xx only) - 13 CPU core - 16 LCD controller - 17 USB0 - 18 USB1 - 19 DMA - 20 SDIO - 21 External memory controller (EMC) - 22 Ethernet - 25 Flash bank A - 27 EEPROM - 28 GPIO - 29 Flash bank B - 32 Timer0 - 33 Timer1 - 34 Timer2 - 35 Timer3 - 36 Repetitive Interrupt timer (RIT) - 37 State Configurable Timer (SCT) - 38 Motor control PWM (MCPWM) - 39 QEI - 40 ADC0 - 41 ADC1 - 42 DAC - 44 USART0 - 45 UART1 - 46 USART2 - 47 USART3 - 48 I2C0 - 49 I2C1 - 50 SSP0 - 51 SSP1 - 52 I2S0 and I2S1 - 53 Serial Flash Interface (SPIFI) - 54 C_CAN1 - 55 C_CAN0 - 56 ARM Cortex-M0 application core (LPC4370 only) - 57 SGPIO (LPC43xx only) - 58 SPI (LPC43xx only) - 60 ADCHS (12-bit ADC) (LPC4370 only) - -Refer to NXP LPC18xx or LPC43xx user manual for more details about -the reset signals and the connected block/peripheral. - -Reset provider example: -rgu: reset-controller@40053000 { - compatible = "nxp,lpc1850-rgu"; - reg = <0x40053000 0x1000>; - clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; - clock-names = "delay", "reg"; - #reset-cells = <1>; -}; - -Reset consumer example: -mac: ethernet@40010000 { - compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; - reg = <0x40010000 0x2000>; - interrupts = <5>; - interrupt-names = "macirq"; - clocks = <&ccu1 CLK_CPU_ETHERNET>; - clock-names = "stmmaceth"; - resets = <&rgu 22>; - reset-names = "stmmaceth"; -}; diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.yaml b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.yaml new file mode 100644 index 000000000000..9c3c13c543c7 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/nxp,lpc1850-rgu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC1850 Reset Generation Unit (RGU) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc1850-rgu + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: delay + - const: reg + + '#reset-cells': + const: 1 + description: | + See table below for valid peripheral reset numbers. Numbers not + in the table below are either reserved or not applicable for + normal operation. + + Reset Peripheral + 9 System control unit (SCU) + 12 ARM Cortex-M0 subsystem core (LPC43xx only) + 13 CPU core + 16 LCD controller + 17 USB0 + 18 USB1 + 19 DMA + 20 SDIO + 21 External memory controller (EMC) + 22 Ethernet + 25 Flash bank A + 27 EEPROM + 28 GPIO + 29 Flash bank B + 32 Timer0 + 33 Timer1 + 34 Timer2 + 35 Timer3 + 36 Repetitive Interrupt timer (RIT) + 37 State Configurable Timer (SCT) + 38 Motor control PWM (MCPWM) + 39 QEI + 40 ADC0 + 41 ADC1 + 42 DAC + 44 USART0 + 45 UART1 + 46 USART2 + 47 USART3 + 48 I2C0 + 49 I2C1 + 50 SSP0 + 51 SSP1 + 52 I2S0 and I2S1 + 53 Serial Flash Interface (SPIFI) + 54 C_CAN1 + 55 C_CAN0 + 56 ARM Cortex-M0 application core (LPC4370 only) + 57 SGPIO (LPC43xx only) + 58 SPI (LPC43xx only) + 60 ADCHS (12-bit ADC) (LPC4370 only) + + Refer to NXP LPC18xx or LPC43xx user manual for more details about + the reset signals and the connected block/peripheral. + +required: + - compatible + - reg + - clocks + - clock-names + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + #include <dt-bindings/clock/lpc18xx-cgu.h> + + reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; + }; + diff --git a/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml b/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml index c79f61c2373b..c1b800a10b53 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml @@ -15,7 +15,12 @@ description: properties: compatible: - const: renesas,r9a09g057-usb2phy-reset # RZ/V2H(P) + oneOf: + - items: + - const: renesas,r9a09g056-usb2phy-reset # RZ/V2N + - const: renesas,r9a09g057-usb2phy-reset + + - const: renesas,r9a09g057-usb2phy-reset # RZ/V2H(P) reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt deleted file mode 100644 index 0c241d4aae76..000000000000 --- a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt +++ /dev/null @@ -1,30 +0,0 @@ -Synopsys DesignWare Reset controller -======================================= - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: - -- compatible: should be one of the following. - "snps,dw-high-reset" - for active high configuration - "snps,dw-low-reset" - for active low configuration - -- reg: physical base address of the controller and length of memory mapped - region. - -- #reset-cells: must be 1. - -example: - - dw_rst_1: reset-controller@0000 { - compatible = "snps,dw-high-reset"; - reg = <0x0000 0x4>; - #reset-cells = <1>; - }; - - dw_rst_2: reset-controller@1000 { - compatible = "snps,dw-low-reset"; - reg = <0x1000 0x8>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.yaml b/Documentation/devicetree/bindings/reset/snps,dw-reset.yaml new file mode 100644 index 000000000000..1dde7b6e8623 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/snps,dw-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare Reset controller + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +properties: + compatible: + enum: + - snps,dw-high-reset + - snps,dw-low-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + + reset-controller: true + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset-controller@0 { + compatible = "snps,dw-high-reset"; + reg = <0x0000 0x4>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml index 1d1b84575960..08d28313b870 100644 --- a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml +++ b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml @@ -16,7 +16,9 @@ properties: - enum: - sophgo,sg2044-reset - const: sophgo,sg2042-reset - - const: sophgo,sg2042-reset + - enum: + - sophgo,cv1800b-reset + - sophgo,sg2042-reset reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/riscv/andes.yaml b/Documentation/devicetree/bindings/riscv/andes.yaml new file mode 100644 index 000000000000..aa1edf1fdec7 --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/andes.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/andes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Andes SoC-based boards + +maintainers: + - Ben Zong-You Xie <ben717@andestech.com> + +description: + Andes SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - andestech,voyager + - const: andestech,qilai + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 2c72f148a74b..1a0cf0702a45 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: - amd,mbv32 + - amd,mbv64 - andestech,ax45mp - canaan,k210 - sifive,bullet0 diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml index 827983008ecf..817cbdaa2b2d 100644 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml @@ -20,11 +20,17 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + rng@18032000 { compatible = "brcm,iproc-rng200"; reg = <0x18032000 0x28>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml index 17d6280e5515..a86e926ae3d1 100644 --- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml @@ -28,6 +28,7 @@ properties: - nvidia,tegra186-rtc - nvidia,tegra194-rtc - nvidia,tegra234-rtc + - nvidia,tegra264-rtc - const: nvidia,tegra20-rtc reg: diff --git a/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml index f6fdcc7090b6..1860f0e4c31a 100644 --- a/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml @@ -61,14 +61,14 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/r9a06g032-sysctrl.h> rtc@40006000 { - compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; - reg = <0x40006000 0x1000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "alarm", "timer", "pps"; - clocks = <&sysctrl R9A06G032_HCLK_RTC>; - clock-names = "hclk"; - power-domains = <&sysctrl>; - start-year = <2000>; - }; + compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; + reg = <0x40006000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "timer", "pps"; + clocks = <&sysctrl R9A06G032_HCLK_RTC>; + clock-names = "hclk"; + power-domains = <&sysctrl>; + start-year = <2000>; + }; diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index c6bc27709bf7..e46bee8d25bf 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -49,6 +49,24 @@ allOf: - required: [ clock-frequency ] - required: [ clocks ] + - if: + properties: + compatible: + contains: + const: nxp,lpc1850-uart + then: + properties: + clock-names: + items: + - const: uartclk + - const: reg + else: + properties: + clock-names: + items: + - const: core + - const: bus + properties: compatible: oneOf: @@ -142,9 +160,22 @@ properties: clock-names: minItems: 1 - items: - - const: core - - const: bus + maxItems: 2 + oneOf: + - items: + - const: core + - const: bus + - items: + - const: uartclk + - const: reg + + dmas: + minItems: 1 + maxItems: 4 + + dma-names: + minItems: 1 + maxItems: 4 resets: maxItems: 1 @@ -237,9 +268,13 @@ if: properties: compatible: contains: - const: spacemit,k1-uart + enum: + - spacemit,k1-uart + - nxp,lpc1850-uart then: - required: [clock-names] + required: + - clocks + - clock-names properties: clocks: minItems: 2 diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml index d7f047b0bf24..9d3e5c1d8502 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml @@ -16,9 +16,10 @@ properties: items: - const: xlnx,xuartps - const: cdns,uart-r1p8 - - description: UART controller for Zynq Ultrascale+ MPSoC - items: - - const: xlnx,zynqmp-uart + - items: + - enum: + - axiado,ax3000-uart + - xlnx,zynqmp-uart - const: cdns,uart-r1p12 reg: diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml index c55d9a0efa19..5bd8a8853ae0 100644 --- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml +++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml @@ -25,6 +25,7 @@ properties: - enum: - mediatek,mt2701-uart - mediatek,mt2712-uart + - mediatek,mt6572-uart - mediatek,mt6580-uart - mediatek,mt6582-uart - mediatek,mt6589-uart diff --git a/Documentation/devicetree/bindings/serial/qcom,sa8255p-geni-uart.yaml b/Documentation/devicetree/bindings/serial/qcom,sa8255p-geni-uart.yaml new file mode 100644 index 000000000000..c8f01923cb25 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,sa8255p-geni-uart.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/qcom,sa8255p-geni-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Geni based QUP UART interface + +maintainers: + - Praveen Talari <quic_ptalari@quicinc.com> + +allOf: + - $ref: /schemas/serial/serial.yaml# + +properties: + compatible: + enum: + - qcom,sa8255p-geni-uart + - qcom,sa8255p-geni-debug-uart + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: UART core irq + - description: Wakeup irq (RX GPIO) + + interrupt-names: + description: + The UART interrupt and optionally the RX in-band wakeup interrupt + as not all UART instances have a wakeup-capable interrupt routed + via the PDC. + minItems: 1 + items: + - const: uart + - const: wakeup + + power-domains: + minItems: 2 + maxItems: 2 + + power-domain-names: + items: + - const: power + - const: perf + +required: + - compatible + - reg + - interrupts + - power-domains + - power-domain-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@990000 { + compatible = "qcom,sa8255p-geni-uart"; + reg = <0x990000 0x4000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>; + power-domain-names = "power", "perf"; + }; +... diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 9480ed30915c..4b3f98a46cd9 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -63,6 +63,12 @@ properties: - const: renesas,rcar-gen4-hscif # R-Car Gen4 - const: renesas,hscif # generic HSCIF compatible UART + - items: + - enum: + - renesas,hscif-r8a78000 # R-Car X5H + - const: renesas,rcar-gen5-hscif # R-Car Gen5 + - const: renesas,hscif # generic HSCIF compatible UART + reg: maxItems: 1 @@ -120,6 +126,7 @@ if: - renesas,rcar-gen2-hscif - renesas,rcar-gen3-hscif - renesas,rcar-gen4-hscif + - renesas,rcar-gen5-hscif then: required: - resets diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml index ea879db5f485..f50d8e02f476 100644 --- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml @@ -8,14 +8,20 @@ title: Renesas RSCI Serial Communication Interface maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> - - Thierry Bultel <thierry.bultel.yh@bp.renesas.com> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> allOf: - $ref: serial.yaml# properties: compatible: - const: renesas,r9a09g077-rsci # RZ/T2H + oneOf: + - items: + - const: renesas,r9a09g087-rsci # RZ/N2H + - const: renesas,r9a09g077-rsci # RZ/T2H + + - items: + - const: renesas,r9a09g077-rsci # RZ/T2H reg: maxItems: 1 @@ -35,10 +41,15 @@ properties: - const: tei clocks: - maxItems: 1 + minItems: 2 + maxItems: 3 clock-names: - const: fck # UART functional clock + minItems: 2 + items: + - const: operation + - const: bus + - const: sck # optional external clock input power-domains: maxItems: 1 @@ -60,10 +71,6 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/renesas-cpg-mssr.h> - aliases { - serial0 = &sci0; - }; - sci0: serial@80005000 { compatible = "renesas,r9a09g077-rsci"; reg = <0x80005000 0x400>; @@ -72,7 +79,7 @@ examples: <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD 108>; - clock-names = "fck"; + clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE 13>; + clock-names = "operation", "bus"; power-domains = <&cpg>; }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 8e82999e6acb..e925cd4c3ac8 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -72,6 +72,12 @@ properties: - items: - enum: + - renesas,scif-r8a78000 # R-Car X5H + - const: renesas,rcar-gen5-scif # R-Car Gen5 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: - renesas,scif-r9a07g044 # RZ/G2{L,LC} - items: @@ -86,6 +92,7 @@ properties: - items: - enum: - renesas,scif-r9a09g047 # RZ/G3E + - renesas,scif-r9a09g056 # RZ/V2N - const: renesas,scif-r9a09g057 # RZ/V2H fallback reg: @@ -174,6 +181,7 @@ allOf: - renesas,rcar-gen2-scif - renesas,rcar-gen3-scif - renesas,rcar-gen4-scif + - renesas,rcar-gen5-scif - renesas,scif-r9a07g044 - renesas,scif-r9a09g057 then: diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 83d9986d8e98..1a1f991d5364 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -30,6 +30,10 @@ properties: - samsung,exynos8895-uart - items: - enum: + - samsung,exynos2200-uart + - const: google,gs101-uart + - items: + - enum: - samsung,exynos7-uart - tesla,fsd-uart - const: samsung,exynos4210-uart diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 8f1b7f704c5b..cb9da6c97afc 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -108,6 +108,9 @@ properties: parameter. Define this if your UART does not implement the busy functionality. type: boolean + power-domains: + maxItems: 1 + resets: minItems: 1 maxItems: 2 diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml index 3dc66f1de023..f3a85c67ce8a 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -186,22 +186,22 @@ examples: }; power-controller { - compatible = "amlogic,meson-axg-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&sysctrl_AO>; - - resets = <&reset_viu>, - <&reset_venc>, - <&reset_vcbus>, - <&reset_vencl>, - <&reset_vid_lock>; - reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock"; - clocks = <&clk_vpu>, <&clk_vapb>; - clock-names = "vpu", "vapb"; + compatible = "amlogic,meson-axg-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; }; phy { - compatible = "amlogic,axg-mipi-pcie-analog-phy"; - #phy-cells = <0>; + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + #phy-cells = <0>; }; }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,imx23-digctl.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,imx23-digctl.yaml new file mode 100644 index 000000000000..3de135a70579 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,imx23-digctl.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,imx23-digctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale mxs digctrl for i.MX23/i.MX28 + +description: | + The digital control block provides overall control of various items within + the top digital block of the chip, including: + - Default first-level page table (DFLPT) controls + - HCLK performance counter + - Free-running microseconds counter + - Entropy control + - BIST controls for ARM Core and On-Chip RAM + - Chip Revision register + - USB loop back congtrol + - Other miscellaneous controls + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx28-digctl + - const: fsl,imx23-digctl + - const: fsl,imx23-digctl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + digctl@8001c000 { + compatible = "fsl,imx28-digctl", "fsl,imx23-digctl"; + reg = <0x8001c000 0x2000>; + interrupts = <89>; + }; + diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index 41fbbe059d80..851a1260f8dc 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -25,6 +25,7 @@ properties: compatible: items: - enum: + - qcom,milos-aoss-qmp - qcom,qcs615-aoss-qmp - qcom,qcs8300-aoss-qmp - qcom,qdu1000-aoss-qmp @@ -38,6 +39,7 @@ properties: - qcom,sdx75-aoss-qmp - qcom,sdm845-aoss-qmp - qcom,sm6350-aoss-qmp + - qcom,sm7150-aoss-qmp - qcom,sm8150-aoss-qmp - qcom,sm8250-aoss-qmp - qcom,sm8350-aoss-qmp diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml index ce7e20dd22c9..fdc6fc17ed71 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml @@ -18,6 +18,7 @@ properties: compatible: items: - enum: + - qcom,sm7150-dcc - qcom,sm8150-dcc - qcom,sc7280-dcc - qcom,sc7180-dcc diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml index f2c5ec7e6437..84218636c0d8 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml @@ -55,25 +55,25 @@ additionalProperties: false examples: - | eud@88e0000 { - compatible = "qcom,sc7280-eud", "qcom,eud"; - reg = <0x88e0000 0x2000>, - <0x88e2000 0x1000>; + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0x88e0000 0x2000>, + <0x88e2000 0x1000>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - eud_ep: endpoint { - remote-endpoint = <&usb2_role_switch>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; - port@1 { - reg = <1>; - eud_con: endpoint { - remote-endpoint = <&con_eud>; - }; - }; - }; + port@1 { + reg = <1>; + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 4c9e78f29523..48114bb0c927 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -37,6 +37,7 @@ properties: - const: qcom,pmic-glink - items: - enum: + - qcom,milos-pmic-glink - qcom,sm8650-pmic-glink - qcom,sm8750-pmic-glink - qcom,x1e80100-pmic-glink diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml new file mode 100644 index 000000000000..352af3426d34 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,sa8255p-geni-se-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI Serial Engine QUP Wrapper Controller + +maintainers: + - Praveen Talari <quic_ptalari@quicinc.com> + +description: + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper + is a programmable module for supporting a wide range of serial interfaces + like UART, SPI, I2C, I3C, etc. A single QUP module can provide up to 8 Serial + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP + Wrapper controller is modeled as a node with zero or more child nodes each + representing a serial engine. + +properties: + compatible: + const: qcom,sa8255p-geni-se-qup + + reg: + description: QUP wrapper common register address and length. + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + iommus: + maxItems: 1 + + dma-coherent: true + +patternProperties: + "spi@[0-9a-f]+$": + type: object + description: GENI serial engine based SPI controller. SPI in master mode + supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol + variants. + additionalProperties: true + + properties: + compatible: + const: qcom,sa8255p-geni-spi + + "i2c@[0-9a-f]+$": + type: object + description: GENI serial engine based I2C controller. + additionalProperties: true + + properties: + compatible: + const: qcom,sa8255p-geni-i2c + + "serial@[0-9a-f]+$": + type: object + description: GENI Serial Engine based UART Controller. + additionalProperties: true + + properties: + compatible: + enum: + - qcom,sa8255p-geni-uart + - qcom,sa8255p-geni-debug-uart + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + geniqup@9c0000 { + compatible = "qcom,sa8255p-geni-se-qup"; + reg = <0 0x9c0000 0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial@990000 { + compatible = "qcom,sa8255p-geni-uart"; + reg = <0 0x990000 0 0x4000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>; + power-domain-names = "power", "perf"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index 5e6e6e6208dc..f34b4986b336 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -388,6 +388,13 @@ properties: - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S) - const: renesas,r8a779h0 + - description: R-Car V4M-7 (R8A779H2) + items: + - enum: + - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H2ASKB0F10SA001) + - const: renesas,r8a779h2 # ES2.x + - const: renesas,r8a779h0 + - description: R-Car H3e (R8A779M0) items: - enum: @@ -576,7 +583,7 @@ properties: - description: RZ/V2H(P) (R9A09G057) items: - enum: - - renesas,rzv2h-evk # RZ/V2H EVK + - renesas,rzv2h-evk # RZ/V2H EVK (RTK0EF0168C06001BJ) - enum: - renesas,r9a09g057h41 # RZ/V2H - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support @@ -595,7 +602,7 @@ properties: - description: RZ/T2H (R9A09G077) items: - enum: - - renesas,rzt2h-evk # RZ/T2H Evaluation Board + - renesas,rzt2h-evk # RZ/T2H Evaluation Board (RTK9RZT2H0S00000BJ) - enum: - renesas,r9a09g077m04 # RZ/T2H with Single Cortex-A55 + Dual Cortex-R52 - no security - renesas,r9a09g077m24 # RZ/T2H with Dual Cortex-A55 + Dual Cortex-R52 - no security diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index ccdcc889ba8e..1ab0b092e2a5 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -179,10 +179,12 @@ allOf: properties: gpio: type: object + properties: + compatible: + contains: + const: rockchip,rk3328-grf-gpio - $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml# - - unevaluatedProperties: false + additionalProperties: true power-controller: type: object diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index 3109df43d502..f0fb24156da9 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -203,6 +203,9 @@ allOf: then: required: - google,pmu-intr-gen-syscon + else: + properties: + google,pmu-intr-gen-syscon: false examples: - | diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index d27ed6c9d61e..d8b302f97547 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -30,6 +30,7 @@ properties: - samsung,exynos8895-fsys1-sysreg - samsung,exynos8895-peric0-sysreg - samsung,exynos8895-peric1-sysreg + - samsung,exynosautov920-hsi2-sysreg - samsung,exynosautov920-peric0-sysreg - samsung,exynosautov920-peric1-sysreg - tesla,fsd-cam-sysreg diff --git a/Documentation/devicetree/bindings/riscv/sophgo.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml index b4c4d7a7d7ad..1c502618de51 100644 --- a/Documentation/devicetree/bindings/riscv/sophgo.yaml +++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/riscv/sophgo.yaml# +$id: http://devicetree.org/schemas/soc/sophgo/sophgo.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sophgo SoC-based boards @@ -28,12 +28,19 @@ properties: - const: sophgo,cv1812h - items: - enum: + - milkv,duo-module-01-evb + - const: milkv,duo-module-01 + - const: sophgo,sg2000 + - items: + - enum: - sipeed,licheerv-nano-b - const: sipeed,licheerv-nano - const: sophgo,sg2002 - items: - enum: - milkv,pioneer + - sophgo,sg2042-evb-v1 + - sophgo,sg2042-evb-v2 - const: sophgo,sg2042 - items: - enum: diff --git a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml index 30aaf49da03d..133a391ee68c 100644 --- a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml +++ b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml @@ -19,6 +19,9 @@ properties: - spacemit,k1-syscon-apbc - spacemit,k1-syscon-apmu - spacemit,k1-syscon-mpmu + - spacemit,k1-syscon-rcpu + - spacemit,k1-syscon-rcpu2 + - spacemit,k1-syscon-apbc2 reg: maxItems: 1 @@ -47,9 +50,6 @@ properties: required: - compatible - reg - - clocks - - clock-names - - "#clock-cells" - "#reset-cells" allOf: @@ -57,13 +57,28 @@ allOf: properties: compatible: contains: - const: spacemit,k1-syscon-apbc + enum: + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu then: + required: + - "#power-domain-cells" + else: properties: "#power-domain-cells": false - else: + - if: + properties: + compatible: + contains: + enum: + - spacemit,k1-syscon-apbc + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu + then: required: - - "#power-domain-cells" + - clocks + - clock-names + - "#clock-cells" additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml b/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml new file mode 100644 index 000000000000..a73691cf5624 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2025 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/ti,j784s4-bist.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 BIST + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: + The BIST (Built-In Self Test) module is an IP block present in K3 devices + that support triggering of BIST tests, both PBIST (Memory BIST) and LBIST + (Logic BIST) on a core. Both tests are destructive in nature. At boot, BIST + is executed by hardware for the MCU domain automatically as part of HW POST. + +properties: + compatible: + const: ti,j784s4-bist + + reg: + maxItems: 2 + + reg-names: + items: + - const: cfg + - const: ctrl_mmr + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - ti,sci-dev-id + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + safety-selftest@33c0000 { + compatible = "ti,j784s4-bist"; + reg = <0x00 0x033c0000 0x00 0x400>, + <0x00 0x0010c1a0 0x00 0x01c>; + reg-names = "cfg", "ctrl_mmr"; + clocks = <&k3_clks 237 7>; + power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>; + ti,sci-dev-id = <234>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml index 0df41c4f60c1..56b16183c885 100644 --- a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml +++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml @@ -121,13 +121,13 @@ examples: }; wkup_m3_ipc@1324 { - compatible = "ti,am3352-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&am335x_mailbox &mbox_wkupm3>; - ti,vtt-gpio-pin = <7>; - firmware-name = "am335x-evm-scale-data.bin"; + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am335x_mailbox &mbox_wkupm3>; + ti,vtt-gpio-pin = <7>; + firmware-name = "am335x-evm-scale-data.bin"; }; }; @@ -155,20 +155,20 @@ examples: pinctrl-0 = <&ddr3_vtt_toggle_default>; ddr3_vtt_toggle_default: ddr_vtt_toggle_default { - pinctrl-single,pins = < + pinctrl-single,pins = < 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) - >; + >; }; }; wkup_m3_ipc@1324 { - compatible = "ti,am4372-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&am437x_mailbox &mbox_wkupm3>; - ti,set-io-isolation; - firmware-name = "am43x-evm-scale-data.bin"; + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am437x_mailbox &mbox_wkupm3>; + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; }; }; diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml index 725b47e82062..cd47905eb20a 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml @@ -41,6 +41,10 @@ properties: description: This pin is connected to the chip's RESET pin. maxItems: 1 + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/fsl,mxs-audio-sgtl5000.yaml b/Documentation/devicetree/bindings/sound/fsl,mxs-audio-sgtl5000.yaml new file mode 100644 index 000000000000..d12774b42a11 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,mxs-audio-sgtl5000.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,mxs-audio-sgtl5000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS audio complex with SGTL5000 codec + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + items: + - enum: + - bluegiga,apx4devkit-sgtl5000 + - denx,m28evk-sgtl5000 + - fsl,imx28-evk-sgtl5000 + - fsl,imx28-mbmx28lc-sgtl5000 + - fsl,imx28-tx28-sgtl5000 + - const: fsl,mxs-audio-sgtl5000 + + model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex + + saif-controllers: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: The phandle list of the MXS SAIF controller + + audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SGTL5000 audio codec + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, SGTL5000 + pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + +required: + - compatible + - saif-controllers + - audio-codec + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + sound { + compatible = "fsl,imx28-evk-sgtl5000", "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8173-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8173-afe-pcm.yaml new file mode 100644 index 000000000000..d8993b5d457a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8173-afe-pcm.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8173-afe-pcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek AFE PCM controller for MT8173 + +maintainers: + - Trevor Wu <trevor.wu@mediatek.com> + +properties: + compatible: + const: mediatek,mt8173-afe-pcm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: audio infra sys clock + - description: audio top mux + - description: audio intbus mux + - description: apll1 clock + - description: apll2 clock + - description: i2s0 mclk mux + - description: i2s1 mclk mux + - description: i2s2 mclk mux + - description: i2s3 mclk mux + - description: i2s3 bclk mux + + clock-names: + items: + - const: infra_sys_audio_clk + - const: top_pdn_audio + - const: top_pdn_aud_intbus + - const: bck0 + - const: bck1 + - const: i2s0_m + - const: i2s1_m + - const: i2s2_m + - const: i2s3_m + - const: i2s3_b + + power-domains: + maxItems: 1 + + memory-region: + description: memory region for audio DMA buffers + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8173-power.h> + + mt8173-afe-pcm@11220000 { + compatible = "mediatek,mt8173-afe-pcm"; + reg = <0x11220000 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>; + power-domains = <&spm MT8173_POWER_DOMAIN_AUDIO>; + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUDIO_SEL>, + <&topckgen CLK_TOP_AUD_INTBUS_SEL>, + <&topckgen CLK_TOP_APLL1_DIV0>, + <&topckgen CLK_TOP_APLL2_DIV0>, + <&topckgen CLK_TOP_I2S0_M_SEL>, + <&topckgen CLK_TOP_I2S1_M_SEL>, + <&topckgen CLK_TOP_I2S2_M_SEL>, + <&topckgen CLK_TOP_I2S3_M_SEL>, + <&topckgen CLK_TOP_I2S3_B_SEL>; + clock-names = "infra_sys_audio_clk", + "top_pdn_audio", + "top_pdn_aud_intbus", + "bck0", + "bck1", + "i2s0_m", + "i2s1_m", + "i2s2_m", + "i2s3_m", + "i2s3_b"; + memory-region = <&afe_dma_mem>; + }; diff --git a/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml index 7fe85b08f9df..f5af2cf18158 100644 --- a/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml @@ -25,6 +25,10 @@ properties: reset-names: const: audiosys + memory-region: + description: memory region for audio DMA buffers + maxItems: 1 + mediatek,apmixedsys: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek apmixedsys controller @@ -170,6 +174,7 @@ examples: "top_apll12_div_tdm", "top_mux_audio_h", "top_clk26m_clk"; + memory-region = <&afe_dma_mem>; }; ... diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml index 064ef172bef4..8ddf49b0040d 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml @@ -23,6 +23,10 @@ properties: reset-names: const: audiosys + memory-region: + description: memory region for audio DMA buffers + maxItems: 1 + mediatek,apmixedsys: $ref: /schemas/types.yaml#/definitions/phandle description: The phandle of the mediatek apmixedsys controller @@ -95,6 +99,7 @@ examples: "aud_dac_predis_clk", "aud_infra_clk", "aud_infra_26m_clk"; + memory-region = <&afe_dma_mem>; }; ... diff --git a/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt deleted file mode 100644 index e302c7f43b95..000000000000 --- a/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt +++ /dev/null @@ -1,45 +0,0 @@ -Mediatek AFE PCM controller - -Required properties: -- compatible = "mediatek,mt8173-afe-pcm"; -- reg: register location and size -- interrupts: Should contain AFE interrupt -- clock-names: should have these clock names: - "infra_sys_audio_clk", - "top_pdn_audio", - "top_pdn_aud_intbus", - "bck0", - "bck1", - "i2s0_m", - "i2s1_m", - "i2s2_m", - "i2s3_m", - "i2s3_b"; - -Example: - - afe: mt8173-afe-pcm@11220000 { - compatible = "mediatek,mt8173-afe-pcm"; - reg = <0 0x11220000 0 0x1000>; - interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>; - clocks = <&infracfg INFRA_AUDIO>, - <&topckgen TOP_AUDIO_SEL>, - <&topckgen TOP_AUD_INTBUS_SEL>, - <&topckgen TOP_APLL1_DIV0>, - <&topckgen TOP_APLL2_DIV0>, - <&topckgen TOP_I2S0_M_CK_SEL>, - <&topckgen TOP_I2S1_M_CK_SEL>, - <&topckgen TOP_I2S2_M_CK_SEL>, - <&topckgen TOP_I2S3_M_CK_SEL>, - <&topckgen TOP_I2S3_B_CK_SEL>; - clock-names = "infra_sys_audio_clk", - "top_pdn_audio", - "top_pdn_aud_intbus", - "bck0", - "bck1", - "i2s0_m", - "i2s1_m", - "i2s2_m", - "i2s3_m", - "i2s3_b"; - }; diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt deleted file mode 100644 index 4eb980bd0287..000000000000 --- a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Freescale MXS audio complex with SGTL5000 codec - -Required properties: -- compatible : "fsl,mxs-audio-sgtl5000" -- model : The user-visible name of this sound complex -- saif-controllers : The phandle list of the MXS SAIF controller -- audio-codec : The phandle of the SGTL5000 audio codec -- audio-routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. Valid names could be power supplies, SGTL5000 - pins, and the jacks on the board: - - Power supplies: - * Mic Bias - - SGTL5000 pins: - * MIC_IN - * LINE_IN - * HP_OUT - * LINE_OUT - - Board connectors: - * Mic Jack - * Line In Jack - * Headphone Jack - * Line Out Jack - * Ext Spk - -Example: - -sound { - compatible = "fsl,imx28-evk-sgtl5000", - "fsl,mxs-audio-sgtl5000"; - model = "imx28-evk-sgtl5000"; - saif-controllers = <&saif0 &saif1>; - audio-codec = <&sgtl5000>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; -}; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index f41deaa6f4df..dd549db6c841 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -40,7 +40,11 @@ properties: clock-names: minItems: 1 - maxItems: 4 + items: + - const: mclk + - const: macro + - const: dcodec + - const: npl clock-output-names: maxItems: 1 @@ -80,8 +84,7 @@ allOf: clocks: maxItems: 1 clock-names: - items: - - const: mclk + maxItems: 1 - if: properties: @@ -94,10 +97,8 @@ allOf: minItems: 3 maxItems: 3 clock-names: - items: - - const: mclk - - const: macro - - const: dcodec + minItems: 3 + maxItems: 3 - if: properties: @@ -112,11 +113,8 @@ allOf: minItems: 4 maxItems: 4 clock-names: - items: - - const: mclk - - const: macro - - const: dcodec - - const: npl + minItems: 4 + maxItems: 4 - if: properties: @@ -130,10 +128,8 @@ allOf: minItems: 3 maxItems: 3 clock-names: - items: - - const: mclk - - const: macro - - const: dcodec + minItems: 3 + maxItems: 3 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml index 297aa362aa54..268f7073d797 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml @@ -29,6 +29,12 @@ properties: unevaluatedProperties: false description: Qualcomm DSP audio ports + usbd: + type: object + $ref: /schemas/sound/qcom,q6usb.yaml# + unevaluatedProperties: false + description: Qualcomm DSP USB audio ports + required: - compatible - dais @@ -64,5 +70,12 @@ examples: qcom,sd-lines = <0 1 2 3>; }; }; + + usbd { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; }; }; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index 590eb177f57a..5d3dbb6cb1ae 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -28,10 +28,12 @@ properties: - qcom,sm8750-sndcard - const: qcom,sm8450-sndcard - enum: + - fairphone,fp4-sndcard - fairphone,fp5-sndcard - qcom,apq8096-sndcard - qcom,qcm6490-idp-sndcard - qcom,qcs6490-rb3gen2-sndcard + - qcom,qcs8275-sndcard - qcom,qcs9075-sndcard - qcom,qcs9100-sndcard - qcom,qrb4210-rb2-sndcard diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml index c69291f4d575..85283f94465d 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml @@ -45,6 +45,9 @@ properties: purpose of handling altmode muxing and orientation switching to detect and enable Audio Accessory Mode. + vdd-px-supply: + description: A reference to the 1.2V PX supply + required: - compatible diff --git a/Documentation/devicetree/bindings/sound/richtek,rt9123.yaml b/Documentation/devicetree/bindings/sound/richtek,rt9123.yaml index 5acb05cdfefd..819ca06203b1 100644 --- a/Documentation/devicetree/bindings/sound/richtek,rt9123.yaml +++ b/Documentation/devicetree/bindings/sound/richtek,rt9123.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/sound/richtek,rt9123.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Richtek RT9123 Audio Amplifier +title: Richtek RT9123/RTQ9124 Audio Amplifier maintainers: - ChiYuan Huang <cy_huang@richtek.com> @@ -15,6 +15,12 @@ description: support various formats, including I2S, left-justified, right-justified, and TDM formats. + RTQ9124 is an ultra-low output noise, digital input, mono-channel Class-D + power amplifier that supports a 2.1MHz switching frequency. It integrates + both DC and AC load diagnostics, as well as real-time load monitoring to + assess speaker condition. The device operates from 4.5V to 18V and delivers + up to 30W output power. + allOf: - $ref: dai-common.yaml# @@ -22,6 +28,7 @@ properties: compatible: enum: - richtek,rt9123 + - richtek,rtq9124 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml index 74f7d02b424b..0b013a34e2c1 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas57xx.yaml @@ -18,6 +18,7 @@ properties: - ti,tas5719 - ti,tas5721 - ti,tas5733 + - ti,tas5753 reg: maxItems: 1 @@ -98,6 +99,7 @@ allOf: contains: enum: - ti,tas5721 + - ti,tas5753 then: properties: HPVDD-supply: false diff --git a/Documentation/devicetree/bindings/spi/amlogic,a4-spisg.yaml b/Documentation/devicetree/bindings/spi/amlogic,a4-spisg.yaml new file mode 100644 index 000000000000..9bfb8089f7ea --- /dev/null +++ b/Documentation/devicetree/bindings/spi/amlogic,a4-spisg.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2025 Amlogic, Inc. All rights reserved +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/amlogic,a4-spisg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic SPI Scatter-Gather Controller + +maintainers: + - Xianwei Zhao <xianwei.zhao@amlogic.com> + - Sunny Luo <sunny.luo@amlogic.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: amlogic,a4-spisg + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: pclk + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + spi@50000 { + compatible = "amlogic,a4-spisg"; + reg = <0x50000 0x38>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 37>, + <&clkc 93>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/fsl,dspi.yaml b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml index bf9cce53c48d..8dbda1ffb5eb 100644 --- a/Documentation/devicetree/bindings/spi/fsl,dspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl,dspi.yaml @@ -23,6 +23,7 @@ properties: - fsl,ls2080a-dspi - fsl,ls2085a-dspi - fsl,lx2160a-dspi + - nxp,s32g2-dspi - items: - enum: - fsl,ls1012a-dspi @@ -37,6 +38,9 @@ properties: - items: - const: fsl,lx2160a-dspi - const: fsl,ls2085a-dspi + - items: + - const: nxp,s32g3-dspi + - const: nxp,s32g2-dspi reg: maxItems: 1 @@ -114,3 +118,17 @@ examples: spi-cs-hold-delay-ns = <50>; }; }; + # S32G3 in target mode + - | + spi@401d4000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x401d4000 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <8>; + bus-num = <0>; + dmas = <&edma0 0 7>, <&edma0 0 8>; + dma-names = "tx", "rx"; + spi-slave; + }; diff --git a/Documentation/devicetree/bindings/spi/marvell,orion-spi.yaml b/Documentation/devicetree/bindings/spi/marvell,orion-spi.yaml new file mode 100644 index 000000000000..7f5ec1d7f59b --- /dev/null +++ b/Documentation/devicetree/bindings/spi/marvell,orion-spi.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/marvell,orion-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Orion SPI controller + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Gregory CLEMENT <gregory.clement@bootlin.com> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - marvell,orion-spi + - marvell,armada-380-spi # For ap80x and cp11x + - items: + - enum: + - marvell,armada-370-spi + - marvell,armada-375-spi + - marvell,armada-380-spi + - marvell,armada-390-spi + - marvell,armada-xp-spi + - const: marvell,orion-spi + + cell-index: + description: Instance id for the SPI controller + deprecated: true + + reg: + minItems: 1 + items: + - description: control registers + - description: CS0 MBUS target/attribute registers for direct mode + - description: CS1 MBUS target/attribute registers for direct mode + - description: CS2 MBUS target/attribute registers for direct mode + - description: CS3 MBUS target/attribute registers for direct mode + - description: CS4 MBUS target/attribute registers for direct mode + - description: CS5 MBUS target/attribute registers for direct mode + - description: CS6 MBUS target/attribute registers for direct mode + - description: CS7 MBUS target/attribute registers for direct mode + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: core + - const: axi + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + clocks = <&coreclk 0>; + interrupts = <23>; + }; + - | + #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + + bus { + #address-cells = <2>; + #size-cells = <1>; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */ + <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */ + <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */ + <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */ + <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */ + <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */ + <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */ + <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */ + <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */ + clocks = <&coreclk 0>; + interrupts = <23>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml index ed17815263a8..3bf3eb1f8728 100644 --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml @@ -41,11 +41,16 @@ properties: - const: mediatek,spi-ipm - items: - enum: + - mediatek,mt8196-spi + - const: mediatek,mt6991-spi + - items: + - enum: - mediatek,mt2701-spi - mediatek,mt2712-spi - mediatek,mt6589-spi - mediatek,mt6765-spi - mediatek,mt6893-spi + - mediatek,mt6991-spi - mediatek,mt7622-spi - mediatek,mt8135-spi - mediatek,mt8173-spi diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.yaml b/Documentation/devicetree/bindings/spi/mxs-spi.yaml index e2512166c1cd..0cf8e7269ba9 100644 --- a/Documentation/devicetree/bindings/spi/mxs-spi.yaml +++ b/Documentation/devicetree/bindings/spi/mxs-spi.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/nxp,lpc3220-spi.yaml b/Documentation/devicetree/bindings/spi/nxp,lpc3220-spi.yaml new file mode 100644 index 000000000000..d5f780912f21 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nxp,lpc3220-spi.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nxp,lpc3220-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC3220 SPI controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + enum: + - nxp,lpc3220-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +allOf: + - $ref: spi-controller.yaml# + +unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + +examples: + - | + #include <dt-bindings/clock/lpc32xx-clock.h> + + spi@20088000 { + compatible = "nxp,lpc3220-spi"; + reg = <0x20088000 0x1000>; + clocks = <&clk LPC32XX_CLK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + }; + diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml new file mode 100644 index 000000000000..ab27fefc3c3a --- /dev/null +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/renesas,rzv2h-rspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) Renesas Serial Peripheral Interface (RSPI) + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + const: renesas,r9a09g057-rspi # RZ/V2H(P) + + reg: + maxItems: 1 + + interrupts: + items: + - description: Idle Interrupt + - description: Error Interrupt + - description: Communication End Interrupt + - description: Receive Buffer Full Interrupt + - description: Transmit Buffer Empty Interrupt + + interrupt-names: + items: + - const: idle + - const: error + - const: end + - const: rx + - const: tx + + clocks: + maxItems: 3 + + clock-names: + items: + - const: pclk + - const: pclk_sfr + - const: tclk + + resets: + maxItems: 2 + + reset-names: + items: + - const: presetn + - const: tresetn + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - '#address-cells' + - '#size-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/renesas-cpg-mssr.h> + spi@12800800 { + compatible = "renesas,r9a09g057-rspi"; + + reg = <0x12800800 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 504 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 505 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "idle", "error", "end", "rx", "tx"; + clocks = <&cpg CPG_MOD 0x5a>, + <&cpg CPG_MOD 0x5b>, + <&cpg CPG_MOD 0x5c>; + clock-names = "pclk", "pclk_sfr", "tclk"; + resets = <&cpg 0x7f>, <&cpg 0x80>; + reset-names = "presetn", "tresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index fb2a6039928c..b1e2a97be699 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -46,7 +46,6 @@ properties: required: - compatible - reg - - spi-max-frequency - mux-controls unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt deleted file mode 100644 index 8434a65fc12a..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ /dev/null @@ -1,79 +0,0 @@ -Marvell Orion SPI device - -Required properties: -- compatible : should be on of the following: - - "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs - - "marvell,armada-370-spi", for the Armada 370 SoCs - - "marvell,armada-375-spi", for the Armada 375 SoCs - - "marvell,armada-380-spi", for the Armada 38x SoCs - - "marvell,armada-390-spi", for the Armada 39x SoCs - - "marvell,armada-xp-spi", for the Armada XP SoCs -- reg : offset and length of the register set for the device. - This property can optionally have additional entries to configure - the SPI direct access mode that some of the Marvell SoCs support - additionally to the normal indirect access (PIO) mode. The values - for the MBus "target" and "attribute" are defined in the Marvell - SoC "Functional Specifications" Manual in the chapter "Marvell - Core Processor Address Decoding". - The eight register sets following the control registers refer to - chip-select lines 0 through 7 respectively. -- cell-index : Which of multiple SPI controllers is this. -- clocks : pointers to the reference clocks for this device, the first - one is the one used for the clock on the spi bus, the - second one is optional and is the clock used for the - functional part of the controller - -Optional properties: -- interrupts : Is currently not used. -- clock-names : names of used clocks, mandatory if the second clock is - used, the name must be "core", and "axi" (the latter - is only for Armada 7K/8K). - - -Example: - spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; - interrupts = <23>; - }; - -Example with SPI direct mode support (optionally): - spi0: spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */ - <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */ - <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */ - <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */ - <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */ - <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */ - <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */ - <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */ - <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */ - interrupts = <23>; - }; - -To enable the direct mode, the board specific 'ranges' property in the -'soc' node needs to add the entries for the desired SPI controllers -and its chip-selects that are used in the direct mode instead of PIO -mode. Here an example for this (SPI controller 0, device 1 and SPI -controller 1, device 2 are used in direct mode. All other SPI device -are used in the default indirect (PIO) mode): - soc { - /* - * Enable the SPI direct access by configuring an entry - * here in the board-specific ranges property - */ - ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000>, /* internal regs */ - <MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>, /* BootROM */ - <MBUS_ID(0x01, 0x5e) 0 0 0xf1100000 0x10000>, /* SPI0-DEV1 */ - <MBUS_ID(0x01, 0x9a) 0 0 0xf1110000 0x10000>; /* SPI1-DEV2 */ - -For further information on the MBus bindings, please see the MBus -DT documentation: -Documentation/devicetree/bindings/bus/mvebu-mbus.txt diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 8fc17e16efb2..8b6e8fc009db 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -115,6 +115,7 @@ properties: maxItems: 4 st,spi-midi-ns: + deprecated: true description: | Only for STM32H7, (Master Inter-Data Idleness) minimum time delay in nanoseconds inserted between two consecutive data frames. diff --git a/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml b/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml index 66e54dedab14..0e7ead763705 100644 --- a/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml +++ b/Documentation/devicetree/bindings/spi/spi-sg2044-nor.yaml @@ -14,12 +14,9 @@ allOf: properties: compatible: - oneOf: - - const: sophgo,sg2044-spifmc-nor - - items: - - enum: - - sophgo,sg2042-spifmc-nor - - const: sophgo,sg2044-spifmc-nor + enum: + - sophgo,sg2042-spifmc-nor + - sophgo,sg2044-spifmc-nor reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index 76e43c0ce36c..ca880a226afa 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -18,6 +18,38 @@ maintainers: allOf: - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: st,stm32f4-spi + + then: + properties: + st,spi-midi-ns: false + sram: false + dmas: + maxItems: 2 + dma-names: + items: + - const: rx + - const: tx + + - if: + properties: + compatible: + contains: + const: st,stm32mp25-spi + + then: + properties: + sram: false + dmas: + maxItems: 2 + dma-names: + items: + - const: rx + - const: tx properties: compatible: @@ -41,16 +73,28 @@ properties: dmas: description: | - DMA specifiers for tx and rx dma. DMA fifo mode must be used. See - the STM32 DMA controllers bindings Documentation/devicetree/bindings/dma/stm32/*.yaml. + DMA specifiers for tx and rx channels. DMA fifo mode must be used. See + the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32/st,*dma.yaml + minItems: 2 items: - description: rx DMA channel - description: tx DMA channel + - description: rxm2m MDMA channel dma-names: + minItems: 2 items: - const: rx - const: tx + - const: rxm2m + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Phandles to a reserved SRAM region which is used as temporary + storage memory between DMA and MDMA engines. + The region should be defined as child node of the AHB SRAM node + as per the generic bindings in Documentation/devicetree/bindings/sram/sram.yaml access-controllers: minItems: 1 diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml index 2711f90d9664..72d35e30c439 100644 --- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml @@ -22,17 +22,32 @@ properties: - qcom,msm8974-imem - qcom,msm8976-imem - qcom,qcs404-imem + - qcom,qcs615-imem - qcom,qcs8300-imem - qcom,qdu1000-imem - qcom,sa8775p-imem + - qcom,sar2130p-imem - qcom,sc7180-imem - qcom,sc7280-imem + - qcom,sc8280xp-imem - qcom,sdm630-imem - qcom,sdm845-imem - qcom,sdx55-imem - qcom,sdx65-imem + - qcom,sdx75-imem + - qcom,sm6115-imem + - qcom,sm6125-imem + - qcom,sm6350-imem - qcom,sm6375-imem + - qcom,sm7150-imem + - qcom,sm8150-imem + - qcom,sm8250-imem + - qcom,sm8350-imem - qcom,sm8450-imem + - qcom,sm8550-imem + - qcom,sm8650-imem + - qcom,sm8750-imem + - qcom,x1e80100-imem - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt deleted file mode 100644 index 88bc94fe1f6d..000000000000 --- a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt +++ /dev/null @@ -1,24 +0,0 @@ -* ST SPEAr ADC device driver - -Required properties: -- compatible: Should be "st,spear600-adc" -- reg: Address and length of the register set for the device -- interrupts: Should contain the ADC interrupt -- sampling-frequency: Default sampling frequency - -Optional properties: -- vref-external: External voltage reference in milli-volts. If omitted - the internal voltage reference will be used. -- average-samples: Number of samples to generate an average value. If - omitted, single data conversion will be used. - -Examples: - - adc: adc@d8200000 { - compatible = "st,spear600-adc"; - reg = <0xd8200000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <6>; - sampling-frequency = <5000000>; - vref-external = <2500>; /* 2.5V VRef */ - }; diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst index f3e23e69a638..46d0b036c97e 100644 --- a/Documentation/devicetree/bindings/submitting-patches.rst +++ b/Documentation/devicetree/bindings/submitting-patches.rst @@ -21,8 +21,16 @@ I. For patch submitters "<binding dir>: dt-bindings: ..." The 80 characters of the subject are precious. It is recommended to not - use "Documentation" or "doc" because that is implied. All bindings are - docs. Repeating "binding" again should also be avoided. + use "Documentation", "doc" or "YAML" because that is implied. All + bindings are docs and all new bindings are supposed to be in Devicetree + schema format. Repeating "binding" again should also be avoided, so for + a new device it is often enough for example:: + + "dt-bindings: iio: adc: Add ROHM BD79100G" + + Conversion of other formats to DT schema:: + + "dt-bindings: iio: adc: adi,ad7476: Convert to DT schema" 2) DT binding files are written in DT schema format using json-schema vocabulary and YAML file format. The DT binding files must pass validation diff --git a/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml index d96a2e32bd8f..7bd0955e6d04 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml @@ -20,16 +20,23 @@ allOf: properties: compatible: - enum: - - mediatek,mt2701-thermal - - mediatek,mt2712-thermal - - mediatek,mt7622-thermal - - mediatek,mt7981-thermal - - mediatek,mt7986-thermal - - mediatek,mt8173-thermal - - mediatek,mt8183-thermal - - mediatek,mt8365-thermal - - mediatek,mt8516-thermal + oneOf: + - enum: + - mediatek,mt2701-thermal + - mediatek,mt2712-thermal + - mediatek,mt7622-thermal + - mediatek,mt7986-thermal + - mediatek,mt8173-thermal + - mediatek,mt8183-thermal + - mediatek,mt8365-thermal + - items: + - enum: + - mediatek,mt8516-thermal + - const: mediatek,mt2701-thermal + - items: + - enum: + - mediatek,mt7981-thermal + - const: mediatek,mt7986-thermal reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml index 19bb1f324183..cf47a1f3b384 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml @@ -21,6 +21,7 @@ properties: - nvidia,tegra124-soctherm - nvidia,tegra132-soctherm - nvidia,tegra210-soctherm + - nvidia,tegra210b01-soctherm reg: maxItems: 2 @@ -207,6 +208,7 @@ allOf: enum: - nvidia,tegra124-soctherm - nvidia,tegra210-soctherm + - nvidia,tegra210b01-soctherm then: properties: reg: diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 0e653bbe9884..94311ebd7652 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -49,6 +49,7 @@ properties: - description: v2 of TSENS items: - enum: + - qcom,milos-tsens - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml index b717ea8261ca..573f447cc26e 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml @@ -21,6 +21,7 @@ properties: - rockchip,rk3368-tsadc - rockchip,rk3399-tsadc - rockchip,rk3568-tsadc + - rockchip,rk3576-tsadc - rockchip,rk3588-tsadc - rockchip,rv1108-tsadc @@ -39,6 +40,17 @@ properties: - const: tsadc - const: apb_pclk + nvmem-cells: + items: + - description: cell handle to where the trim's base temperature is stored + - description: + cell handle to where the trim's tenths of Celsius base value is stored + + nvmem-cell-names: + items: + - const: trim_base + - const: trim_base_frac + resets: minItems: 1 maxItems: 3 @@ -50,6 +62,12 @@ properties: - const: tsadc - const: tsadc-phy + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + "#thermal-sensor-cells": const: 1 @@ -71,6 +89,27 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] +patternProperties: + "@[0-9a-f]+$": + type: object + properties: + reg: + maxItems: 1 + description: sensor ID, a.k.a. channel number + + nvmem-cells: + items: + - description: handle of cell containing calibration data + + nvmem-cell-names: + items: + - const: trim + + required: + - reg + + unevaluatedProperties: false + required: - compatible - reg @@ -79,6 +118,29 @@ required: - clock-names - resets +allOf: + - if: + not: + properties: + compatible: + contains: + const: rockchip,rk3568-tsadc + then: + properties: + nvmem-cells: false + nvmem-cell-names: false + - if: + not: + properties: + compatible: + contains: + enum: + - rockchip,rk3568-tsadc + - rockchip,rk3576-tsadc + then: + patternProperties: + "@[0-9a-f]+$": false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/timer/andestech,plmt0.yaml b/Documentation/devicetree/bindings/timer/andestech,plmt0.yaml new file mode 100644 index 000000000000..90b612096004 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/andestech,plmt0.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/andestech,plmt0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Andes machine-level timer + +description: + The Andes machine-level timer device (PLMT0) provides machine-level timer + functionality for a set of HARTs on a RISC-V platform. It has a single + fixed-frequency monotonic time counter (MTIME) register and a time compare + register (MTIMECMP) for each HART connected to the PLMT0. A timer interrupt is + generated if MTIME >= MTIMECMP. + +maintainers: + - Ben Zong-You Xie <ben717@andestech.com> + +properties: + compatible: + items: + - enum: + - andestech,qilai-plmt + - const: andestech,plmt0 + + reg: + maxItems: 1 + + interrupts-extended: + minItems: 1 + maxItems: 32 + description: + Specifies which harts are connected to the PLMT0. Each item must points + to a riscv,cpu-intc node, which has a riscv cpu node as parent. The + PLMT0 supports 1 hart up to 32 harts. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts-extended + +examples: + - | + interrupt-controller@100000 { + compatible = "andestech,qilai-plmt", "andestech,plmt0"; + reg = <0x100000 0x100000>; + interrupts-extended = <&cpu0intc 7>, + <&cpu1intc 7>, + <&cpu2intc 7>, + <&cpu3intc 7>; + }; diff --git a/Documentation/devicetree/bindings/timer/via,vt8500-timer.txt b/Documentation/devicetree/bindings/timer/via,vt8500-timer.txt deleted file mode 100644 index 901c73f0d8ef..000000000000 --- a/Documentation/devicetree/bindings/timer/via,vt8500-timer.txt +++ /dev/null @@ -1,15 +0,0 @@ -VIA/Wondermedia VT8500 Timer ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-timer" -- reg : Should contain 1 register ranges(address and length) -- interrupts : interrupt for the timer - -Example: - - timer@d8130100 { - compatible = "via,vt8500-timer"; - reg = <0xd8130100 0x28>; - interrupts = <36>; - }; diff --git a/Documentation/devicetree/bindings/timer/via,vt8500-timer.yaml b/Documentation/devicetree/bindings/timer/via,vt8500-timer.yaml new file mode 100644 index 000000000000..e748149948f3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/via,vt8500-timer.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/via,vt8500-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VIA/Wondermedia VT8500 Timer + +description: + This is the timer block that is a standalone part of the system power + management controller on VIA/WonderMedia SoCs (VIA VT8500 and alike). + The hardware has a single 32-bit counter running at 3 MHz and four match + registers, each of which is associated with a dedicated match interrupt, + and the first of which can also serve as the system watchdog (if the + watchdog function is enabled, it will reset the system upon match instead + of triggering its respective interrupt) + +maintainers: + - Alexey Charkov <alchark@gmail.com> + +properties: + compatible: + const: via,vt8500-timer + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Channel 0 match. Note that if the watchdog function + is enabled, this interrupt will not fire and the system will + reboot instead once the counter reaches match register 0 value + - description: Channel 1 match + - description: Channel 2 match + - description: Channel 3 match + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; diff --git a/Documentation/devicetree/bindings/trigger-source/adi,util-sigma-delta-spi.yaml b/Documentation/devicetree/bindings/trigger-source/adi,util-sigma-delta-spi.yaml new file mode 100644 index 000000000000..ea466179551c --- /dev/null +++ b/Documentation/devicetree/bindings/trigger-source/adi,util-sigma-delta-spi.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2025 Analog Devices, Inc. +# Copyright (c) 2025 BayLibre, SAS + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/trigger-source/adi,util-sigma-delta-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Util Sigma-Delta SPI IP Core + +maintainers: + - David Lechner <dlechner@baylibre.com> + +description: + The Util Sigma-Delta SPI is an FPGA IP core from Analog Devices that provides + a SPI offload trigger from the RDY signal of the combined DOUT/RDY pin of + the sigma-delta family of ADCs. + https://analogdevicesinc.github.io/hdl/library/util_sigma_delta_spi/index.html + +properties: + compatible: + const: adi,util-sigma-delta-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#trigger-source-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - '#trigger-source-cells' + +additionalProperties: false + +examples: + - | + trigger@40000 { + reg = <0x40000 0x1000>; + compatible = "adi,util-sigma-delta-spi"; + clocks = <&clk 0>; + #trigger-source-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/trigger-source/gpio-trigger.yaml b/Documentation/devicetree/bindings/trigger-source/gpio-trigger.yaml new file mode 100644 index 000000000000..1331d153ee82 --- /dev/null +++ b/Documentation/devicetree/bindings/trigger-source/gpio-trigger.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/trigger-source/gpio-trigger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic trigger source using GPIO + +description: A GPIO used as a trigger source. + +maintainers: + - Jonathan Santos <Jonathan.Santos@analog.com> + +properties: + compatible: + const: gpio-trigger + + '#trigger-source-cells': + const: 0 + + gpios: + maxItems: 1 + description: GPIO to be used as a trigger source. + +required: + - compatible + - '#trigger-source-cells' + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + trigger { + compatible = "gpio-trigger"; + #trigger-source-cells = <0>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 27930708ccd5..08654ed4021b 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -30,6 +30,8 @@ properties: items: # Entries are sorted alphanumerically by the compatible - enum: + # ABB register based spi sensors + - abb,spi-sensor # Acbel fsg032 power supply - acbel,fsg032 # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin @@ -39,8 +41,14 @@ properties: - ad,adm9240 # AD5110 - Nonvolatile Digital Potentiometer - adi,ad5110 - # Analog Devices ADP5589 Keypad Decoder and I/O Expansion - - adi,adp5589 + # Temperature sensor with integrated fan control + - adi,adm1027 + # Analog Devices ADT7411 Temperature Sensor and 8-channel ADC + - adi,adt7411 + # Temperature sensor with integrated fan control + - adi,adt7463 + # Temperature sensor with integrated fan control + - adi,adt7468 # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher - adi,lt7182s # AMS iAQ-Core VOC Sensor @@ -291,6 +299,8 @@ properties: - mps,mp2891 # Monolithic Power Systems Inc. multi-phase controller mp2993 - mps,mp2993 + # Monolithic Power Systems Inc. hot-swap protection device + - mps,mp5023 # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5920 - mps,mp5920 # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 @@ -299,16 +309,30 @@ properties: - mps,mp9941 # Temperature sensor with integrated fan control - national,lm63 + # Temperature sensor with integrated fan control + - national,lm64 + # Temperature sensor + - national,lm95235 + # Temperature sensor + - national,lm95245 + # Temperature sensor with integrated fan control + - national,lm96163 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor - national,lm80 # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor - national,lm81 # Temperature sensor with integrated fan control - national,lm85 + # Temperature sensor with integrated fan control + - national,lm85b + # Temperature sensor with integrated fan control + - national,lm85c # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator - national,lm92 # Nuvoton Temperature Sensor - nuvoton,w83773g + # NXP ISP1301 USB transceiver + - nxp,isp1301 # OKI ML86V7667 video decoder - oki,ml86v7667 # ON Semiconductor ADT7462 Temperature, Voltage Monitor and Fan Controller @@ -357,12 +381,38 @@ properties: - silabs,si7020 # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply - skyworks,sky81452 + # Temperature sensor with integrated fan control + - smsc,emc6d100 + # Temperature sensor with integrated fan control + - smsc,emc6d101 + # Temperature sensor with integrated fan control + - smsc,emc6d102 + # Temperature sensor with integrated fan control + - smsc,emc6d103 + # Temperature sensor with integrated fan control + - smsc,emc6d103s # SparkFun Qwiic Joystick (COM-15168) with i2c interface - sparkfun,qwiic-joystick # Sierra Wireless mangOH Green SPI IoT interface - swir,mangoh-iotport-spi # Ambient Light Sensor with SMBUS/Two Wire Serial Interface - taos,tsl2550 + # Digital PWM System Controller PMBus + - ti,cd9200 + # Digital PWM System Controller PMBus + - ti,cd9220 + # Digital PWM System Controller PMBus + - ti,cd9222 + # Digital PWM System Controller PMBus + - ti,cd9224 + # Digital PWM System Controller PMBus + - ti,cd9240 + # Digital PWM System Controller PMBus + - ti,cd9244 + # Digital PWM System Controller PMBus + - ti,cd9246 + # Digital PWM System Controller PMBus + - ti,cd9248 # Temperature and humidity sensor with i2c interface - ti,hdc1000 # Temperature and humidity sensor with i2c interface @@ -390,6 +440,10 @@ properties: - ti,tmp125 # TI DC-DC converter on PMBus - ti,tps40400 + # TI DCAP+ multiphase controller + - ti,tps53647 + # TI DCAP+ multiphase controller + - ti,tps53667 # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus - ti,tps53676 # TI Dual channel DCAP+ multiphase controller TPS53679 diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index cc5787a8cfa3..691d6cf02c27 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -23,6 +23,7 @@ properties: - nvidia,tegra30-udc - nvidia,tegra114-udc - nvidia,tegra124-udc + - nxp,s32g2-usb - qcom,ci-hdrc - items: - enum: @@ -37,6 +38,10 @@ properties: - enum: - nuvoton,npcm845-udc - const: nuvoton,npcm750-udc + - items: + - enum: + - nxp,s32g3-usb + - const: nxp,s32g2-usb clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index e83d30a91b88..6c3a10991b8b 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -59,7 +59,7 @@ properties: - const: amcc,dwc-otg - const: apm,apm82181-dwc-otg - const: snps,dwc2 - - const: sophgo,cv1800-usb + - const: sophgo,cv1800b-usb - const: st,stm32f4x9-fsotg - const: st,stm32f4x9-hsotg - const: st,stm32f7-hsotg diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml index 019435540df0..ca677d1a8274 100644 --- a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml @@ -21,6 +21,8 @@ properties: - fsl,imx53-usbmisc - fsl,imx6q-usbmisc - fsl,vf610-usbmisc + - nxp,s32g2-usbmisc + - nxp,s32g3-usbmisc - items: - enum: - fsl,imx6ul-usbmisc diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index 6fe2d356dcbd..9a94b2a74a1e 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -26,19 +26,26 @@ properties: description: The regulator that provides 3.3V or 5.0V core power to the hub. - peer-hub: - $ref: /schemas/types.yaml#/definitions/phandle - description: - For onboard hub controllers that support USB 3.x and USB 2.0 hubs - with shared resets and power supplies, this property is used to identify - the hubs with which these are shared. + peer-hub: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port@': + $ref: /schemas/graph.yaml#/properties/port + + properties: + reg: + minimum: 1 + maximum: 4 required: - compatible - reg allOf: - - $ref: usb-device.yaml# + - $ref: usb-hub.yaml# - if: properties: compatible: @@ -62,13 +69,6 @@ allOf: peer-hub: true vdd-supply: true -patternProperties: - "^.*@[0-9a-f]{1,2}$": - description: The hard wired USB devices - type: object - $ref: /schemas/usb/usb-device.yaml - additionalProperties: true - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt deleted file mode 100644 index ecd607dacba5..000000000000 --- a/Documentation/devicetree/bindings/usb/isp1301.txt +++ /dev/null @@ -1,24 +0,0 @@ -* NXP ISP1301 USB transceiver - -Required properties: -- compatible: must be "nxp,isp1301" -- reg: I2C address of the ISP1301 device - -Optional properties of devices using ISP1301: -- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the - ISP1301 instance associated with the respective USB driver - -Example: - - isp1301: usb-transceiver@2c { - compatible = "nxp,isp1301"; - reg = <0x2c>; - }; - - usbd@31020000 { - compatible = "nxp,lpc3220-udc"; - reg = <0x31020000 0x300>; - interrupt-parent = <&mic>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - transceiver = <&isp1301>; - }; diff --git a/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt deleted file mode 100644 index 29f12a533f66..000000000000 --- a/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt +++ /dev/null @@ -1,28 +0,0 @@ -* NXP LPC32xx SoC USB Device Controller (UDC) - -Required properties: -- compatible: Must be "nxp,lpc3220-udc" -- reg: Physical base address of the controller and length of memory mapped - region. -- interrupts: The USB interrupts: - * USB Device Low Priority Interrupt - * USB Device High Priority Interrupt - * USB Device DMA Interrupt - * External USB Transceiver Interrupt (OTG ATX) -- transceiver: phandle of the associated ISP1301 device - this is necessary for - the UDC controller for connecting to the USB physical layer - -Example: - - isp1301: usb-transceiver@2c { - compatible = "nxp,isp1301"; - reg = <0x2c>; - }; - - usbd@31020000 { - compatible = "nxp,lpc3220-udc"; - reg = <0x31020000 0x300>; - interrupt-parent = <&mic>; - interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - transceiver = <&isp1301>; - }; diff --git a/Documentation/devicetree/bindings/usb/nxp,lpc3220-udc.yaml b/Documentation/devicetree/bindings/usb/nxp,lpc3220-udc.yaml new file mode 100644 index 000000000000..be0457a06861 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nxp,lpc3220-udc.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nxp,lpc3220-udc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx SoC USB Device Controller (UDC) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc3220-udc + + reg: + maxItems: 1 + + interrupts: + items: + - description: USB Device Low Priority Interrupt + - description: USB Device High Priority Interrupt + - description: USB Device DMA Interrupt + - description: External USB Transceiver Interrupt (OTG ATX) + + clocks: + maxItems: 1 + + transceiver: + description: + phandle of the associated ISP1301 device - this is necessary for + the UDC controller for connecting to the USB physical layer + +required: + - compatible + - reg + - interrupts + - transceiver + +additionalProperties: false + +examples: + - | + usbd@31020000 { + compatible = "nxp,lpc3220-udc"; + reg = <0x31020000 0x300>; + interrupt-parent = <&mic>; + interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; + transceiver = <&isp1301>; + }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 6f4d41ba6ca7..a19816bbb1fd 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -27,6 +27,7 @@ properties: - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L - renesas,usbhs-r9a08g045 # RZ/G3S + - renesas,usbhs-r9a09g056 # RZ/V2N - renesas,usbhs-r9a09g057 # RZ/V2H(P) - const: renesas,rzg2l-usbhs diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 5d2a7a8d3ac6..8af7622fcb59 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -21,6 +21,7 @@ patternProperties: "^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*": true "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true + "^pool[0-3],.*": true # Keep list in alphabetical order. "^100ask,.*": @@ -149,6 +150,8 @@ patternProperties: description: Arctic Sand "^arcx,.*": description: arcx Inc. / Archronix Inc. + "^argon40,.*": + description: Argon 40 Technologies Limited "^ariaboard,.*": description: Shanghai Novotech Co., Ltd. (Ariaboard) "^aries,.*": @@ -200,6 +203,8 @@ patternProperties: description: Shanghai Awinic Technology Co., Ltd. "^axentia,.*": description: Axentia Technologies AB + "^axiado,.*": + description: Axiado Corporation "^axis,.*": description: Axis Communications AB "^azoteq,.*": @@ -306,6 +311,8 @@ patternProperties: description: Cirrus Logic, Inc. "^cisco,.*": description: Cisco Systems, Inc. + "^cix,.*": + description: CIX Technology Group Co., Ltd. "^clockwork,.*": description: Clockwork Tech LLC "^cloos,.*": @@ -786,6 +793,8 @@ patternProperties: description: Jide Tech "^joz,.*": description: JOZ BV + "^jty,.*": + description: JTY "^kam,.*": description: Kamstrup A/S "^karo,.*": @@ -890,6 +899,8 @@ patternProperties: description: Nanjing Loongmasses Ltd. "^lsi,.*": description: LSI Corp. (LSI Logic) + "^luckfox,.*": + description: Shenzhen Luckfox Technology Co., Ltd. "^lunzn,.*": description: Shenzhen Lunzn Technology Co., Ltd. "^luxul,.*": @@ -1067,6 +1078,8 @@ patternProperties: description: Next Thing Co. "^ni,.*": description: National Instruments + "^nicera,.*": + description: Nippon Ceramic Co., Ltd. "^nintendo,.*": description: Nintendo "^nlt,.*": @@ -1302,6 +1315,8 @@ patternProperties: description: Recharge Véhicule Électrique (RVE) inc. "^saef,.*": description: Saef Technology Limited + "^sakurapi,.*": + description: SakuraPi.org "^samsung,.*": description: Samsung Semiconductor "^samtec,.*": diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml index 8a6c3a75a547..34951783a633 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml @@ -37,6 +37,7 @@ properties: - fsl,ls1012a-wdt - fsl,ls1021a-wdt - fsl,ls1043a-wdt + - fsl,ls1046a-wdt - fsl,vf610-wdt - const: fsl,imx21-wdt @@ -105,6 +106,7 @@ allOf: - fsl,ls1012a-wdt - fsl,ls1021a-wdt - fsl,ls1043a-wdt + - fsl,ls1046a-wdt then: properties: big-endian: false diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml index 8d2520241e37..ba0bfd73ab62 100644 --- a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml @@ -34,6 +34,7 @@ properties: - items: - enum: - mediatek,mt2701-wdt + - mediatek,mt6572-wdt - mediatek,mt6582-wdt - mediatek,mt6797-wdt - mediatek,mt7622-wdt diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst index 1ad081de2dd0..f8e0293a7c06 100644 --- a/Documentation/devicetree/bindings/writing-bindings.rst +++ b/Documentation/devicetree/bindings/writing-bindings.rst @@ -39,10 +39,22 @@ Overall design Properties ========== -- DO make 'compatible' properties specific. DON'T use wildcards in compatible - strings. DO use fallback compatibles when devices are the same as or a subset - of prior implementations. DO add new compatibles in case there are new - features or bugs. +- DO make 'compatible' properties specific. + + - DON'T use wildcards or device-family names in compatible strings. + + - DO use fallback compatibles when devices are the same as or a superset of + prior implementations. + + - DO add new compatibles in case there are new features or bugs. + + - DO use a SoC-specific compatible for all SoC devices, followed by a + fallback if appropriate. SoC-specific compatibles are also preferred for + the fallbacks. + + - DON'T use bus suffixes to encode the type of interface device is using. + The parent bus node already implies that interface. DON'T add the type of + device, if the device cannot be anything else. - DO use a vendor prefix on device-specific property names. Consider if properties could be common among devices of the same class. Check other @@ -51,12 +63,21 @@ Properties - DON'T redefine common properties. Just reference the definition and define constraints specific to the device. +- DON'T add properties to avoid a specific compatible. DON'T add properties if + they are implied by (deducible from) the compatible. + - DO use common property unit suffixes for properties with scientific units. Recommended suffixes are listed at https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml - DO define properties in terms of constraints. How many entries? What are - possible values? What is the order? + possible values? What is the order? All these constraints represent the ABI + as well. + +- DON'T make changes that break the ABI without explicit and detailed rationale + for why the changes have to be made and their impact. ABI impact goes beyond + the Linux kernel, because it also covers other open-source upstream projects. + Typical cases and caveats ========================= @@ -64,7 +85,7 @@ Typical cases and caveats - Phandle entries, like clocks/dmas/interrupts/resets, should always be explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is more than one phandle. When used, both of these fields need the same - constraints (e.g. list of items). + constraints (e.g. list of items). - For names used in {clock,dma,interrupt,reset}-names, do not add any suffix, e.g.: "tx" instead of "txirq" (for interrupt). @@ -84,6 +105,15 @@ Typical cases and caveats - "syscon" is not a generic property. Use vendor and type, e.g. "vendor,power-manager-syscon". +- Do not add instance index (IDs) properties or custom OF aliases. If the + devices have different programming model, they might need different + compatibles. If such devices use some other device in a different way, e.g. + they program the phy differently, use cell/phandle arguments. + +- Bindings files should be named like compatible: vendor,device.yaml. In case + of multiple compatibles in the binding, use one of the fallbacks or a more + generic name, yet still matching compatible style. + Board/SoC .dts Files ==================== diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst index fc73072f12fc..470d1521fa17 100644 --- a/Documentation/devicetree/bindings/writing-schema.rst +++ b/Documentation/devicetree/bindings/writing-schema.rst @@ -171,6 +171,9 @@ Coding style Use YAML coding style (two-space indentation). For DTS examples in the schema, preferred is four-space indentation. +Place entries in 'properties' and 'required' sections in the same order, using +style from Documentation/devicetree/bindings/dts-coding-style.rst. + Testing ------- diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index 3d56f94ac2ee..2b36ebde9cec 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -275,7 +275,6 @@ GPIO devm_gpiod_put() devm_gpiod_unhinge() devm_gpiochip_add_data() - devm_gpio_request() devm_gpio_request_one() I2C diff --git a/Documentation/driver-api/pwm.rst b/Documentation/driver-api/pwm.rst index b41b1c56477f..0d27a40f5818 100644 --- a/Documentation/driver-api/pwm.rst +++ b/Documentation/driver-api/pwm.rst @@ -173,10 +173,15 @@ Locking ------- The PWM core list manipulations are protected by a mutex, so pwm_get() -and pwm_put() may not be called from an atomic context. Currently the -PWM core does not enforce any locking to pwm_enable(), pwm_disable() and -pwm_config(), so the calling context is currently driver specific. This -is an issue derived from the former barebone API and should be fixed soon. +and pwm_put() may not be called from an atomic context. +Most functions in the PWM consumer API might sleep and so must not be called +from atomic context. The notable exception is pwm_apply_atomic() which has the +same semantics as pwm_apply_might_sleep() but can be called from atomic context. +(The price for that is that it doesn't work for all PWM devices, use +pwm_might_sleep() to check if a given PWM supports atomic operation. + +Locking in the PWM core ensures that callbacks related to a single chip are +serialized. Helpers ------- diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst index fa1ebfcd4472..c1db6a1a67c4 100644 --- a/Documentation/driver-api/serial/driver.rst +++ b/Documentation/driver-api/serial/driver.rst @@ -24,9 +24,8 @@ console support. Console Support --------------- -The serial core provides a few helper functions. This includes identifying -the correct port structure (via uart_get_console()) and decoding command line -arguments (uart_parse_options()). +The serial core provides a few helper functions. This includes +decoding command line arguments (uart_parse_options()). There is also a helper function (uart_console_write()) which performs a character by character write, translating newlines to CRLF sequences. @@ -76,7 +75,7 @@ Other functions uart_add_one_port uart_remove_one_port uart_console_write uart_parse_earlycon uart_parse_options uart_set_options uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change - uart_try_toggle_sysrq uart_get_console + uart_try_toggle_sysrq .. kernel-doc:: include/linux/serial_core.h :identifiers: uart_port_tx_limited uart_port_tx diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst index ec5769accae0..c51ac793dc06 100644 --- a/Documentation/driver-api/thermal/intel_dptf.rst +++ b/Documentation/driver-api/thermal/intel_dptf.rst @@ -206,6 +206,15 @@ All these controls needs admin privilege to update. Update a new temperature target in milli degree celsius for hardware to use for the temperature control. +``thermal_tolerance`` (RW) + This attribute ranges from 0 to 7, where 0 represents + the most aggressive control to avoid any temperature overshoots, and + 7 represents a more graceful approach, favoring performance even at + the expense of temperature overshoots. + Note: This level may not scale linearly. For example, a value of 3 does + not necessarily imply a 50% improvement in performance compared to a + value of 0. + Given that this is platform temperature control, it is expected that a single user-level manager owns and manages the controls. If multiple user-level software applications attempt to write different targets, it diff --git a/Documentation/driver-api/tty/tty_port.rst b/Documentation/driver-api/tty/tty_port.rst index 5cb90e954fcf..504a353f2682 100644 --- a/Documentation/driver-api/tty/tty_port.rst +++ b/Documentation/driver-api/tty/tty_port.rst @@ -42,9 +42,10 @@ TTY Refcounting TTY Helpers ----------- +.. kernel-doc:: include/linux/tty_port.h + :identifiers: tty_port_tty_hangup tty_port_tty_vhangup .. kernel-doc:: drivers/tty/tty_port.c - :identifiers: tty_port_tty_hangup tty_port_tty_wakeup - + :identifiers: tty_port_tty_wakeup Modem Signals ------------- diff --git a/Documentation/driver-api/usb/anchors.rst b/Documentation/driver-api/usb/anchors.rst index 4b248e691bd6..5a93d171e76c 100644 --- a/Documentation/driver-api/usb/anchors.rst +++ b/Documentation/driver-api/usb/anchors.rst @@ -45,17 +45,6 @@ This function kills all URBs associated with an anchor. The URBs are called in the reverse temporal order they were submitted. This way no data can be reordered. -:c:func:`usb_unlink_anchored_urbs` ----------------------------------- - - -This function unlinks all URBs associated with an anchor. The URBs -are processed in the reverse temporal order they were submitted. -This is similar to :c:func:`usb_kill_anchored_urbs`, but it will not sleep. -Therefore no guarantee is made that the URBs have been unlinked when -the call returns. They may be unlinked later but will be unlinked in -finite time. - :c:func:`usb_scuttle_anchored_urbs` ----------------------------------- diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index c52b9da08fa9..7d8435d35a18 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -59,6 +59,9 @@ The following files belong to it: 0x00000200 Platform Correctable 0x00000400 Platform Uncorrectable non-fatal 0x00000800 Platform Uncorrectable fatal + V2_0x00000001 EINJV2 Processor Error + V2_0x00000002 EINJV2 Memory Error + V2_0x00000004 EINJV2 PCI Express Error ================ =================================== The format of the file contents are as above, except present are only @@ -88,6 +91,8 @@ The following files belong to it: Memory address and mask valid (param1 and param2). Bit 2 PCIe (seg,bus,dev,fn) valid (see param4 below). + Bit 3 + EINJv2 extension structure is valid If set to zero, legacy behavior is mimicked where the type of injection specifies just one bit set, and param1 is multiplexed. @@ -122,6 +127,13 @@ The following files belong to it: this actually works depends on what operations the BIOS actually includes in the trigger phase. +- component_id0 .. component_idN, component_syndrome0 .. component_syndromeN + + These files are used to set the "Component Array" field + of the EINJv2 Extension Structure. Each holds a 128-bit + hex value. Writing just a newline to any of these files + sets an invalid (all-ones) value. + CXL error types are supported from ACPI 6.5 onwards (given a CXL port is present). The EINJ user interface for CXL error types is at <debugfs mount point>/cxl. The following files belong to it: @@ -194,6 +206,27 @@ An error injection example:: # echo 0x8 > error_type # Choose correctable memory error # echo 1 > error_inject # Inject now +An EINJv2 error injection example:: + + # cd /sys/kernel/debug/apei/einj + # cat available_error_type # See which errors can be injected + 0x00000002 Processor Uncorrectable non-fatal + 0x00000008 Memory Correctable + 0x00000010 Memory Uncorrectable non-fatal + V2_0x00000001 EINJV2 Processor Error + V2_0x00000002 EINJV2 Memory Error + + # echo 0x12345000 > param1 # Set memory address for injection + # echo 0xfffffffffffff000 > param2 # Range - anywhere in this page + # echo 0x1 > component_id0 # First device ID + # echo 0x4 > component_syndrome0 # First error syndrome + # echo 0x2 > component_id1 # Second device ID + # echo 0x4 > component_syndrome1 # Second error syndrome + # echo '' > component_id2 # Mark id2 invalid to terminate list + # echo V2_0x2 > error_type # Choose EINJv2 memory error + # echo 0xa > flags # set flags to indicate EINJv2 + # echo 1 > error_inject # Inject now + You should see something like this in dmesg:: [22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR diff --git a/Documentation/firmware-guide/acpi/gpio-properties.rst b/Documentation/firmware-guide/acpi/gpio-properties.rst index db0c0b1f3700..a0983b4213ea 100644 --- a/Documentation/firmware-guide/acpi/gpio-properties.rst +++ b/Documentation/firmware-guide/acpi/gpio-properties.rst @@ -6,7 +6,7 @@ _DSD Device Properties Related to GPIO With the release of ACPI 5.1, the _DSD configuration object finally allows names to be given to GPIOs (and other things as well) returned -by _CRS. Previously, we were only able to use an integer index to find +by _CRS. Previously we were only able to use an integer index to find the corresponding GPIO, which is pretty error prone (it depends on the _CRS output ordering, for example). @@ -49,11 +49,11 @@ index pin Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1, the GPIO is marked as active_low. + If 1, the GPIO is marked as active-low. Since ACPI GpioIo() resource does not have a field saying whether it is -active low or high, the "active_low" argument can be used here. Setting -it to 1 marks the GPIO as active low. +active-low or active-high, the "active_low" argument can be used here. +Setting it to 1 marks the GPIO as active-low. Note, active_low in _DSD does not make sense for GpioInt() resource and must be 0. GpioInt() resource has its own means of defining it. @@ -92,8 +92,8 @@ and polarity settings. The table below shows the expectations: | | Low | as low, assuming active | +-------------+-------------+-----------------------------------------------+ -That said, for our above example the both GPIOs, since the bias setting -is explicit and _DSD is present, will be treated as active with a high +That said, for our above example, since the bias setting is explicit and +_DSD is present, both GPIOs will be treated as active with a high polarity and Linux will configure the pins in this state until a driver reprograms them differently. @@ -231,8 +231,8 @@ In those cases ACPI device identification objects, _HID, _CID, _CLS, _SUB, _HRV, available to the driver can be used to identify the device and that is supposed to be sufficient to determine the meaning and purpose of all of the GPIO lines listed by the GpioIo()/GpioInt() resources returned by _CRS. In other words, -the driver is supposed to know what to use the GpioIo()/GpioInt() resources for -once it has identified the device. Having done that, it can simply assign names +the driver is supposed to know what to use from the GpioIo()/GpioInt() resources +for once it has identified the device. Having done that, it can simply assign names to the GPIO lines it is going to use and provide the GPIO subsystem with a mapping between those names and the ACPI GPIO resources corresponding to them. @@ -252,9 +252,9 @@ question would look like this:: static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false }; static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = { - { "reset-gpios", &reset_gpio, 1 }, - { "shutdown-gpios", &shutdown_gpio, 1 }, - { } + { "reset-gpios", &reset_gpio, 1 }, + { "shutdown-gpios", &shutdown_gpio, 1 }, + { } }; Next, the mapping table needs to be passed as the second argument to @@ -270,7 +270,7 @@ Using the _CRS fallback If a device does not have _DSD or the driver does not create ACPI GPIO mapping, the Linux GPIO framework refuses to return any GPIOs. This is -because the driver does not know what it actually gets. For example if we +because the driver does not know what it actually gets. For example, if we have a device like below:: Device (BTH) @@ -292,7 +292,7 @@ The driver might expect to get the right GPIO when it does:: ...error handling... but since there is no way to know the mapping between "reset" and -the GpioIo() in _CRS desc will hold ERR_PTR(-ENOENT). +the GpioIo() in _CRS the desc will hold ERR_PTR(-ENOENT). The driver author can solve this by passing the mapping explicitly (this is the recommended way and it's documented in the above chapter). @@ -318,15 +318,15 @@ Case 1:: desc = gpiod_get(dev, "non-null-connection-id", flags); desc = gpiod_get_index(dev, "non-null-connection-id", index, flags); +Case 1 assumes that corresponding ACPI device description must have +defined device properties and will prevent from getting any GPIO resources +otherwise. + Case 2:: desc = gpiod_get(dev, NULL, flags); desc = gpiod_get_index(dev, NULL, index, flags); -Case 1 assumes that corresponding ACPI device description must have -defined device properties and will prevent to getting any GPIO resources -otherwise. - Case 2 explicitly tells GPIO core to look for resources in _CRS. Be aware that gpiod_get_index() in cases 1 and 2, assuming that there diff --git a/Documentation/firmware-guide/acpi/i2c-muxes.rst b/Documentation/firmware-guide/acpi/i2c-muxes.rst index 3a8997ccd7c4..f366539acd79 100644 --- a/Documentation/firmware-guide/acpi/i2c-muxes.rst +++ b/Documentation/firmware-guide/acpi/i2c-muxes.rst @@ -14,7 +14,7 @@ Consider this topology:: | | | 0x70 |--CH01--> i2c client B (0x50) +------+ +------+ -which corresponds to the following ASL:: +which corresponds to the following ASL (in the scope of \_SB):: Device (SMB1) { @@ -24,7 +24,7 @@ which corresponds to the following ASL:: Name (_HID, ...) Name (_CRS, ResourceTemplate () { I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED, - AddressingMode7Bit, "^SMB1", 0x00, + AddressingMode7Bit, "\\_SB.SMB1", 0x00, ResourceConsumer,,) } @@ -37,7 +37,7 @@ which corresponds to the following ASL:: Name (_HID, ...) Name (_CRS, ResourceTemplate () { I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED, - AddressingMode7Bit, "^CH00", 0x00, + AddressingMode7Bit, "\\_SB.SMB1.CH00", 0x00, ResourceConsumer,,) } } @@ -52,7 +52,7 @@ which corresponds to the following ASL:: Name (_HID, ...) Name (_CRS, ResourceTemplate () { I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED, - AddressingMode7Bit, "^CH01", 0x00, + AddressingMode7Bit, "\\_SB.SMB1.CH01", 0x00, ResourceConsumer,,) } } diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index b45bfb4ebf30..d292a86ac5da 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -167,6 +167,7 @@ Hardware Monitoring Kernel Drivers max77705 max8688 mc13783-adc + mc33xs2410_hwmon mc34vr500 mcp3021 menf21bmc diff --git a/Documentation/hwmon/mc33xs2410_hwmon.rst b/Documentation/hwmon/mc33xs2410_hwmon.rst new file mode 100644 index 000000000000..8a2136ef9139 --- /dev/null +++ b/Documentation/hwmon/mc33xs2410_hwmon.rst @@ -0,0 +1,34 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mc33xs2410_hwmon +============================== + +Supported devices: + + * NXPs MC33XS2410 + + Datasheet: https://www.nxp.com/docs/en/data-sheet/MC33XS2410.pdf + +Authors: + + Dimitri Fedrau <dimitri.fedrau@liebherr.com> + +Description +----------- + +The MC33XS2410 is a four channel self-protected high-side switch featuring +hardware monitoring functions such as temperature, current and voltages for each +of the four channels. + +Sysfs entries +------------- + +======================= ====================================================== +temp1_label "Central die temperature" +temp1_input Measured temperature of central die + +temp[2-5]_label "Channel [1-4] temperature" +temp[2-5]_input Measured temperature of a single channel +temp[2-5]_alarm Temperature alarm +temp[2-5]_max Maximal temperature +======================= ====================================================== diff --git a/Documentation/iio/adxl313.rst b/Documentation/iio/adxl313.rst new file mode 100644 index 000000000000..966e72c0109a --- /dev/null +++ b/Documentation/iio/adxl313.rst @@ -0,0 +1,293 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +ADXL313 driver +=============== + +This driver supports Analog Device's ADXL313 on SPI/I2C bus. + +1. Supported devices +==================== + +* `ADXL313 <https://www.analog.com/ADXL313>`_ + +The ADXL313is a low noise density, low power, 3-axis accelerometer with +selectable measurement ranges. The ADXL313 supports the ±0.5 g, ±1 g, ±2 g and +±4 g ranges. + +2. Device attributes +==================== + +Accelerometer measurements are always provided. + +Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``, +where X is the IIO index of the device. Under these folders reside a set of +device files, depending on the characteristics and features of the hardware +device in questions. These files are consistently generalized and documented in +the IIO ABI documentation. + +The following tables show the adxl313 related device files, found in the +specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. + ++---------------------------------------------------+----------------------------------------------------------+ +| 3-Axis Accelerometer related device files | Description | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_scale | Scale for the accelerometer channels. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_x_raw | Raw X-axis accelerometer channel value. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_y_calibbias | y-axis acceleration offset correction | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_y_raw | Raw Y-axis accelerometer channel value. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer channel. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_z_raw | Raw Z-axis accelerometer channel value. | ++---------------------------------------------------+----------------------------------------------------------+ + ++---------------------------------------+----------------------------------------------+ +| Miscellaneous device files | Description | ++---------------------------------------+----------------------------------------------+ +| name | Name of the IIO device. | ++---------------------------------------+----------------------------------------------+ +| in_accel_sampling_frequency | Currently selected sample rate. | ++---------------------------------------+----------------------------------------------+ +| in_accel_sampling_frequency_available | Available sampling frequency configurations. | ++---------------------------------------+----------------------------------------------+ + +The iio event related settings, found in ``/sys/bus/iio/devices/iio:deviceX/events``. + ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_mag_adaptive_falling_period | AC coupled inactivity time. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_mag_adaptive_falling_value | AC coupled inactivity threshold. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_mag_adaptive_rising_value | AC coupled activity threshold. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_mag_falling_period | Inactivity time. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_mag_falling_value | Inactivity threshold. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_mag_rising_value | Activity threshold. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_x\&y\&z_mag_adaptive_falling_en | Enable or disable AC coupled inactivity events. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_x\|y\|z_mag_adaptive_rising_en | Enable or disable AC coupled activity events. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_x\&y\&z_mag_falling_en | Enable or disable inactivity events. | ++---------------------------------------------------+----------------------------------------------------------+ +| in_accel_x\|y\|z_mag_rising_en | Enable or disable activity events. | ++---------------------------------------------------+----------------------------------------------------------+ + +The default coupling is DC coupled events. In this case the threshold will +be in place as such, where for the AC coupled case an adaptive threshold +(described in the datasheet) will be applied by the sensor. In general activity, +i.e. ``ACTIVITY`` or ``ACTIVITY_AC`` and inactivity i.e. ``INACTIVITY`` or +``INACTIVITY_AC``, will be linked with auto-sleep enabled when both are enabled. +This means in particular ``ACTIVITY`` can also be linked to ``INACTIVITY_AC`` +and vice versa, without problem. + +Note here, that ``ACTIVITY`` and ``ACTIVITY_AC`` are mutually exclusive. This +means, that the most recent configuration will be set. For instance, if +``ACTIVITY`` is enabled, and ``ACTIVITY_AC`` will be enabled, the sensor driver +will have ``ACTIVITY`` disabled, but ``ACTIVITY_AC`` enabled. The same is valid +for inactivity. In case of turning off an event, it has to match to what is +actually enabled, i.e. enabling ``ACTIVITY_AC`` and then disabling ``ACTIVITY`` +is simply ignored as it is already disabled. Or, as if it was any other not +enabled event, too. + +Channels processed values +------------------------- + +A channel value can be read from its _raw attribute. The value returned is the +raw value as reported by the devices. To get the processed value of the channel, +apply the following formula: + +.. code-block:: + + processed value = (_raw + _offset) * _scale + +Where _offset and _scale are device attributes. If no _offset attribute is +present, simply assume its value is 0. + +The ADXL313 driver offers data for a single types of channels, the table below +shows the measurement units for the processed value, which are defined by the +IIO framework: + ++-------------------------------------+---------------------------+ +| Channel type | Measurement unit | ++-------------------------------------+---------------------------+ +| Acceleration on X, Y, and Z axis | Meters per Second squared | ++-------------------------------------+---------------------------+ + +Usage examples +-------------- + +Show device name: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat name + adxl313 + +Show accelerometer channels value: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw + 2 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw + -57 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw + 2 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale + 0.009576806 + +The accelerometer values will be: + +- X-axis acceleration = in_accel_x_raw * in_accel_scale = 0.0191536 m/s^2 +- Y-axis acceleration = in_accel_y_raw * in_accel_scale = -0.5458779 m/s^2 +- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 0.0191536 m/s^2 + +Set calibration offset for accelerometer channels. Note, that the calibration +will be rounded according to the graduation of LSB units: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias + 0 + + root:/sys/bus/iio/devices/iio:device0> echo 50 > in_accel_x_calibbias + root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias + 48 + +Set sampling frequency: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> cat in_accel_sampling_frequency + 100.000000 + root:/sys/bus/iio/devices/iio:device0> cat in_accel_sampling_frequency_available + 6.250000 12.500000 25.000000 50.000000 100.000000 200.000000 400.000000 800.000000 1600.000000 3200.000000 + + root:/sys/bus/iio/devices/iio:device0> echo 400 > in_accel_sampling_frequency + root:/sys/bus/iio/devices/iio:device0> cat in_accel_sampling_frequency + 400.000000 + +3. Device buffers and triggers +============================== + +This driver supports IIO buffers. + +All devices support retrieving the raw acceleration measurements using buffers. + +Usage examples +-------------- + +Select channels for buffer read: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_x_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_y_en + root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_accel_z_en + +Set the number of samples to be stored in the buffer: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length + +Enable buffer readings: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable + +Obtain buffered data: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0 + ... + 000000d0 01 fc 31 00 c7 ff 03 fc 31 00 c7 ff 04 fc 33 00 |..1.....1.....3.| + 000000e0 c8 ff 03 fc 32 00 c5 ff ff fc 32 00 c7 ff 0a fc |....2.....2.....| + 000000f0 30 00 c8 ff 06 fc 33 00 c7 ff 01 fc 2f 00 c8 ff |0.....3...../...| + 00000100 02 fc 32 00 c6 ff 04 fc 33 00 c8 ff 05 fc 33 00 |..2.....3.....3.| + 00000110 ca ff 02 fc 31 00 c7 ff 02 fc 30 00 c9 ff 09 fc |....1.....0.....| + 00000120 35 00 c9 ff 08 fc 35 00 c8 ff 02 fc 31 00 c5 ff |5.....5.....1...| + 00000130 03 fc 32 00 c7 ff 04 fc 32 00 c7 ff 02 fc 31 00 |..2.....2.....1.| + 00000140 c7 ff 08 fc 30 00 c7 ff 02 fc 32 00 c5 ff ff fc |....0.....2.....| + 00000150 31 00 c5 ff 04 fc 31 00 c8 ff 03 fc 32 00 c8 ff |1.....1.....2...| + 00000160 01 fc 31 00 c7 ff 05 fc 31 00 c3 ff 04 fc 31 00 |..1.....1.....1.| + 00000170 c5 ff 04 fc 30 00 c7 ff 03 fc 31 00 c9 ff 03 fc |....0.....1.....| + ... + +Enabling activity detection: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1.28125 > ./events/in_accel_mag_rising_value + root:/sys/bus/iio/devices/iio:device0> echo 1 > ./events/in_accel_x\|y\|z_mag_rising_en + + root:/sys/bus/iio/devices/iio:device0> iio_event_monitor adxl313 + Found IIO device with name adxl313 with device number 0 + <only while moving the sensor> + Event: time: 1748795762298351281, type: accel(x|y|z), channel: 0, evtype: mag, direction: rising + Event: time: 1748795762302653704, type: accel(x|y|z), channel: 0, evtype: mag, direction: rising + Event: time: 1748795762304340726, type: accel(x|y|z), channel: 0, evtype: mag, direction: rising + ... + +Disabling activity detection: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 0 > ./events/in_accel_x\|y\|z_mag_rising_en + root:/sys/bus/iio/devices/iio:device0> iio_event_monitor adxl313 + <nothing> + +Enabling inactivity detection: + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1.234375 > ./events/in_accel_mag_falling_value + root:/sys/bus/iio/devices/iio:device0> echo 5 > ./events/in_accel_mag_falling_period + root:/sys/bus/iio/devices/iio:device0> echo 1 > ./events/in_accel_x\&y\&z_mag_falling_en + + root:/sys/bus/iio/devices/iio:device0> iio_event_monitor adxl313 + Found IIO device with name adxl313 with device number 0 + Event: time: 1748796324115962975, type: accel(x&y&z), channel: 0, evtype: mag, direction: falling + Event: time: 1748796329329981772, type: accel(x&y&z), channel: 0, evtype: mag, direction: falling + Event: time: 1748796334543399706, type: accel(x&y&z), channel: 0, evtype: mag, direction: falling + ... + <every 5s now indicates inactivity> + +Now, enabling activity, e.g. the AC coupled counter-part ``ACTIVITY_AC`` + +.. code-block:: bash + + root:/sys/bus/iio/devices/iio:device0> echo 1.28125 > ./events/in_accel_mag_rising_value + root:/sys/bus/iio/devices/iio:device0> echo 1 > ./events/in_accel_x\|y\|z_mag_rising_en + + root:/sys/bus/iio/devices/iio:device0> iio_event_monitor adxl313 + Found IIO device with name adxl313 with device number 0 + <some activity with the sensor> + Event: time: 1748796880354686777, type: accel(x|y|z), channel: 0, evtype: mag_adaptive, direction: rising + <5s of inactivity, then> + Event: time: 1748796885543252017, type: accel(x&y&z), channel: 0, evtype: mag, direction: falling + <some other activity detected by accelerating the sensor> + Event: time: 1748796887756634678, type: accel(x|y|z), channel: 0, evtype: mag_adaptive, direction: rising + <again, 5s of inactivity> + Event: time: 1748796892964368352, type: accel(x&y&z), channel: 0, evtype: mag, direction: falling + <stays like this until next activity in auto-sleep> + +Note, when AC coupling is in place, the event type will be of ``mag_adaptive``. +AC- or DC-coupled (the default) events are used similarly. + +4. IIO Interfacing Tools +======================== + +See Documentation/iio/iio_tools.rst for the description of the available IIO +interfacing tools. diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index 2d6afc5a8ed5..c106402a91f7 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -31,6 +31,7 @@ Industrial I/O Kernel Drivers adis16475 adis16480 adis16550 + adxl313 adxl380 bno055 ep93xx_adc diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 93d58d9a428b..1d164e005776 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -2192,6 +2192,8 @@ interpolate the memory barrier in the right place: wait_event_timeout(); wait_on_bit(); wait_on_bit_lock(); + wait_event_cmd(); + wait_event_exclusive_cmd(); Secondly, code that performs a wake up normally follows something like this: diff --git a/Documentation/power/pm_qos_interface.rst b/Documentation/power/pm_qos_interface.rst index 69b0fe3e2542..5019c79c7710 100644 --- a/Documentation/power/pm_qos_interface.rst +++ b/Documentation/power/pm_qos_interface.rst @@ -52,13 +52,6 @@ int cpu_latency_qos_request_active(handle): Returns if the request is still active, i.e. it has not been removed from the CPU latency QoS list. -int cpu_latency_qos_add_notifier(notifier): - Adds a notification callback function to the CPU latency QoS. The callback is - called when the aggregated value for the CPU latency QoS is changed. - -int cpu_latency_qos_remove_notifier(notifier): - Removes the notification callback function from the CPU latency QoS. - From user space: diff --git a/Documentation/power/runtime_pm.rst b/Documentation/power/runtime_pm.rst index 63344bea8393..c8dbdb8595e5 100644 --- a/Documentation/power/runtime_pm.rst +++ b/Documentation/power/runtime_pm.rst @@ -154,11 +154,9 @@ suspending the device are satisfied) and to queue up a suspend request for the device in that case. If there is no idle callback, or if the callback returns 0, then the PM core will attempt to carry out a runtime suspend of the device, also respecting devices configured for autosuspend. In essence this means a -call to pm_runtime_autosuspend() (do note that drivers needs to update the -device last busy mark, pm_runtime_mark_last_busy(), to control the delay under -this circumstance). To prevent this (for example, if the callback routine has -started a delayed suspend), the routine must return a non-zero value. Negative -error return codes are ignored by the PM core. +call to pm_runtime_autosuspend(). To prevent this (for example, if the callback +routine has started a delayed suspend), the routine must return a non-zero +value. Negative error return codes are ignored by the PM core. The helper functions provided by the PM core, described in Section 4, guarantee that the following constraints are met with respect to runtime PM callbacks for @@ -330,10 +328,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: 'power.disable_depth' is different from 0 `int pm_runtime_autosuspend(struct device *dev);` - - same as pm_runtime_suspend() except that the autosuspend delay is taken - `into account;` if pm_runtime_autosuspend_expiration() says the delay has - not yet expired then an autosuspend is scheduled for the appropriate time - and 0 is returned + - same as pm_runtime_suspend() except that a call to + pm_runtime_mark_last_busy() is made and an autosuspend is scheduled for + the appropriate time and 0 is returned `int pm_runtime_resume(struct device *dev);` - execute the subsystem-level resume callback for the device; returns 0 on @@ -357,9 +354,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: success or error code if the request has not been queued up `int pm_request_autosuspend(struct device *dev);` - - schedule the execution of the subsystem-level suspend callback for the - device when the autosuspend delay has expired; if the delay has already - expired then the work item is queued up immediately + - Call pm_runtime_mark_last_busy() and schedule the execution of the + subsystem-level suspend callback for the device when the autosuspend delay + expires `int pm_schedule_suspend(struct device *dev, unsigned int delay);` - schedule the execution of the subsystem-level suspend callback for the @@ -411,8 +408,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: pm_request_idle(dev) and return its result `int pm_runtime_put_autosuspend(struct device *dev);` - - does the same as __pm_runtime_put_autosuspend() for now, but in the - future, will also call pm_runtime_mark_last_busy() as well, DO NOT USE! + - set the power.last_busy field to the current time and decrement the + device's usage counter; if the result is 0 then run + pm_request_autosuspend(dev) and return its result `int __pm_runtime_put_autosuspend(struct device *dev);` - decrement the device's usage counter; if the result is 0 then run @@ -427,7 +425,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: pm_runtime_suspend(dev) and return its result `int pm_runtime_put_sync_autosuspend(struct device *dev);` - - decrement the device's usage counter; if the result is 0 then run + - set the power.last_busy field to the current time and decrement the + device's usage counter; if the result is 0 then run pm_runtime_autosuspend(dev) and return its result `void pm_runtime_enable(struct device *dev);` @@ -870,11 +869,9 @@ device is automatically suspended (the subsystem or driver still has to call the appropriate PM routines); rather it means that runtime suspends will automatically be delayed until the desired period of inactivity has elapsed. -Inactivity is determined based on the power.last_busy field. Drivers should -call pm_runtime_mark_last_busy() to update this field after carrying out I/O, -typically just before calling __pm_runtime_put_autosuspend(). The desired -length of the inactivity period is a matter of policy. Subsystems can set this -length initially by calling pm_runtime_set_autosuspend_delay(), but after device +Inactivity is determined based on the power.last_busy field. The desired length +of the inactivity period is a matter of policy. Subsystems can set this length +initially by calling pm_runtime_set_autosuspend_delay(), but after device registration the length should be controlled by user space, using the /sys/devices/.../power/autosuspend_delay_ms attribute. @@ -885,12 +882,13 @@ instead of the non-autosuspend counterparts:: Instead of: pm_runtime_suspend use: pm_runtime_autosuspend; Instead of: pm_schedule_suspend use: pm_request_autosuspend; - Instead of: pm_runtime_put use: __pm_runtime_put_autosuspend; + Instead of: pm_runtime_put use: pm_runtime_put_autosuspend; Instead of: pm_runtime_put_sync use: pm_runtime_put_sync_autosuspend. Drivers may also continue to use the non-autosuspend helper functions; they will behave normally, which means sometimes taking the autosuspend delay into -account (see pm_runtime_idle). +account (see pm_runtime_idle). The autosuspend variants of the functions also +call pm_runtime_mark_last_busy(). Under some circumstances a driver or subsystem may want to prevent a device from autosuspending immediately, even though the usage counter is zero and the @@ -922,12 +920,10 @@ Here is a schematic pseudo-code example:: foo_io_completion(struct foo_priv *foo, void *req) { lock(&foo->private_lock); - if (--foo->num_pending_requests == 0) { - pm_runtime_mark_last_busy(&foo->dev); - __pm_runtime_put_autosuspend(&foo->dev); - } else { + if (--foo->num_pending_requests == 0) + pm_runtime_put_autosuspend(&foo->dev); + else foo_process_next_request(foo); - } unlock(&foo->private_lock); /* Send req result back to the user ... */ } diff --git a/Documentation/usb/gadget_configfs.rst b/Documentation/usb/gadget_configfs.rst index 868e118a2644..ada57c0e34aa 100644 --- a/Documentation/usb/gadget_configfs.rst +++ b/Documentation/usb/gadget_configfs.rst @@ -92,7 +92,7 @@ Then the strings can be specified:: Further custom string descriptors can be created as directories within the language's directory, with the string text being written to the "s" attribute -within the string's directory: +within the string's directory:: $ mkdir strings/0x409/xu.0 $ echo <string text> > strings/0x409/xu.0/s @@ -104,9 +104,9 @@ string descriptors to associate those strings with class descriptors. ------------------------------ Each gadget will consist of a number of configurations, their corresponding -directories must be created: +directories must be created:: -$ mkdir configs/<name>.<number> + $ mkdir configs/<name>.<number> where <name> can be any string which is legal in a filesystem and the <number> is the configuration's number, e.g.:: @@ -246,7 +246,7 @@ a symlink to a function being removed from the configuration, e.g.:: ... ... -Remove strings directories in configurations: +Remove strings directories in configurations:: $ rmdir configs/<config name>.<number>/strings/<lang> @@ -270,7 +270,7 @@ e.g.:: ... ... -Remove functions (function modules are not unloaded, though): +Remove functions (function modules are not unloaded, though):: $ rmdir functions/<name>.<instance name> @@ -369,18 +369,18 @@ For more information on configfs please see The concepts described above translate to USB gadgets like this: 1. A gadget has its config group, which has some attributes (idVendor, -idProduct etc) and default sub-groups (configs, functions, strings). -Writing to the attributes causes the information to be stored in -appropriate locations. In the configs, functions and strings sub-groups -a user can create their sub-groups to represent configurations, functions, -and groups of strings in a given language. + idProduct etc) and default sub-groups (configs, functions, strings). + Writing to the attributes causes the information to be stored in appropriate + locations. In the configs, functions and strings sub-groups a user can + create their sub-groups to represent configurations, functions, and groups + of strings in a given language. 2. The user creates configurations and functions, in the configurations -creates symbolic links to functions. This information is used when the -gadget's UDC attribute is written to, which means binding the gadget -to the UDC. The code in drivers/usb/gadget/configfs.c iterates over -all configurations, and in each configuration it iterates over all -functions and binds them. This way the whole gadget is bound. + creates symbolic links to functions. This information is used when the + gadget's UDC attribute is written to, which means binding the gadget to the + UDC. The code in drivers/usb/gadget/configfs.c iterates over all + configurations, and in each configuration it iterates over all functions and + binds them. This way the whole gadget is bound. 3. The file drivers/usb/gadget/configfs.c contains code for @@ -388,13 +388,12 @@ functions and binds them. This way the whole gadget is bound. - gadget's default groups (configs, functions, strings) - associating functions with configurations (symlinks) -4. Each USB function naturally has its own view of what it wants -configured, so config_groups for particular functions are defined -in the functions implementation files drivers/usb/gadget/f_*.c. +4. Each USB function naturally has its own view of what it wants configured, so + config_groups for particular functions are defined in the functions + implementation files drivers/usb/gadget/f_*.c. 5. Function's code is written in such a way that it uses - -usb_get_function_instance(), which, in turn, calls request_module. -So, provided that modprobe works, modules for particular functions -are loaded automatically. Please note that the converse is not true: -after a gadget is disabled and torn down, the modules remain loaded. + usb_get_function_instance(), which, in turn, calls request_module. So, + provided that modprobe works, modules for particular functions are loaded + automatically. Please note that the converse is not true: after a gadget is + disabled and torn down, the modules remain loaded. diff --git a/Documentation/wmi/devices/lenovo-wmi-gamezone.rst b/Documentation/wmi/devices/lenovo-wmi-gamezone.rst new file mode 100644 index 000000000000..997263e51a7d --- /dev/null +++ b/Documentation/wmi/devices/lenovo-wmi-gamezone.rst @@ -0,0 +1,203 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +========================================================== +Lenovo WMI Interface Gamezone Driver (lenovo-wmi-gamezone) +========================================================== + +Introduction +============ +The Lenovo WMI gamezone interface is broken up into multiple GUIDs, +The primary "Gamezone" GUID provides advanced features such as fan +profiles and overclocking. It is paired with multiple event GUIDs +and data block GUIDs that provide context for the various methods. + +Gamezone Data +------------- + +WMI GUID ``887B54E3-DDDC-4B2C-8B88-68A26A8835D0`` + +The Gamezone Data WMI interface provides platform-profile and fan curve +settings for devices that fall under the "Gaming Series" of Lenovo devices. +It uses a notifier chain to inform other Lenovo WMI interface drivers of the +current platform profile when it changes. + +The following platform profiles are supported: + - low-power + - balanced + - balanced-performance + - performance + - custom + +Balanced-Performance +~~~~~~~~~~~~~~~~~~~~ +Some newer Lenovo "Gaming Series" laptops have an "Extreme Mode" profile +enabled in their BIOS. For these devices, the performance platform profile +corresponds to the BIOS Extreme Mode, while the balanced-performance +platform profile corresponds to the BIOS Performance mode. For legacy +devices, the performance platform profile will correspond with the BIOS +Performance mode. + +For some newer devices the "Extreme Mode" profile is incomplete in the BIOS +and setting it will cause undefined behavior. A BIOS bug quirk table is +provided to ensure these devices cannot set "Extreme Mode" from the driver. + +Custom Profile +~~~~~~~~~~~~~~ +The custom profile represents a hardware mode on Lenovo devices that enables +user modifications to Package Power Tracking (PPT) and fan curve settings. +When an attribute exposed by the Other Mode WMI interface is to be modified, +the Gamezone driver must first be switched to the "custom" profile manually, +or the setting will have no effect. If another profile is set from the list +of supported profiles, the BIOS will override any user PPT settings when +switching to that profile. + +Gamezone Thermal Mode Event +--------------------------- + +WMI GUID ``D320289E-8FEA-41E0-86F9-911D83151B5F`` + +The Gamezone Thermal Mode Event interface notifies the system when the platform +profile has changed, either through the hardware event (Fn+Q for laptops or +Legion + Y for Go Series), or through the Gamezone WMI interface. This event is +implemented in the Lenovo WMI Events driver (lenovo-wmi-events). + + +WMI interface description +========================= + +The WMI interface description can be decoded from the embedded binary MOF (bmof) +data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: + +:: + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("LENOVO_GAMEZONE_DATA class"), guid("{887B54E3-DDDC-4B2C-8B88-68A26A8835D0}")] + class LENOVO_GAMEZONE_DATA { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiMethodId(4), Implemented, Description("Is SupportGpu OverClock")] void IsSupportGpuOC([out, Description("Is SupportGpu OverClock")] uint32 Data); + [WmiMethodId(11), Implemented, Description("Get AslCode Version")] void GetVersion ([out, Description("AslCode version")] UINT32 Data); + [WmiMethodId(12), Implemented, Description("Fan cooling capability")] void IsSupportFanCooling([out, Description("Fan cooling capability")] UINT32 Data); + [WmiMethodId(13), Implemented, Description("Set Fan cooling on/off")] void SetFanCooling ([in, Description("Set Fan cooling on/off")] UINT32 Data); + [WmiMethodId(14), Implemented, Description("cpu oc capability")] void IsSupportCpuOC ([out, Description("cpu oc capability")] UINT32 Data); + [WmiMethodId(15), Implemented, Description("bios has overclock capability")] void IsBIOSSupportOC ([out, Description("bios has overclock capability")] UINT32 Data); + [WmiMethodId(16), Implemented, Description("enable or disable overclock in bios")] void SetBIOSOC ([in, Description("enable or disable overclock in bios")] UINT32 Data); + [WmiMethodId(18), Implemented, Description("Get CPU temperature")] void GetCPUTemp ([out, Description("Get CPU temperature")] UINT32 Data); + [WmiMethodId(19), Implemented, Description("Get GPU temperature")] void GetGPUTemp ([out, Description("Get GPU temperature")] UINT32 Data); + [WmiMethodId(20), Implemented, Description("Get Fan cooling on/off status")] void GetFanCoolingStatus ([out, Description("Get Fan cooling on/off status")] UINT32 Data); + [WmiMethodId(21), Implemented, Description("EC support disable windows key capability")] void IsSupportDisableWinKey ([out, Description("EC support disable windows key capability")] UINT32 Data); + [WmiMethodId(22), Implemented, Description("Set windows key disable/enable")] void SetWinKeyStatus ([in, Description("Set windows key disable/enable")] UINT32 Data); + [WmiMethodId(23), Implemented, Description("Get windows key disable/enable status")] void GetWinKeyStatus ([out, Description("Get windows key disable/enable status")] UINT32 Data); + [WmiMethodId(24), Implemented, Description("EC support disable touchpad capability")] void IsSupportDisableTP ([out, Description("EC support disable touchpad capability")] UINT32 Data); + [WmiMethodId(25), Implemented, Description("Set touchpad disable/enable")] void SetTPStatus ([in, Description("Set touchpad disable/enable")] UINT32 Data); + [WmiMethodId(26), Implemented, Description("Get touchpad disable/enable status")] void GetTPStatus ([out, Description("Get touchpad disable/enable status")] UINT32 Data); + [WmiMethodId(30), Implemented, Description("Get Keyboard feature list")] void GetKeyboardfeaturelist ([out, Description("Get Keyboard feature list")] UINT32 Data); + [WmiMethodId(31), Implemented, Description("Get Memory OC Information")] void GetMemoryOCInfo ([out, Description("Get Memory OC Information")] UINT32 Data); + [WmiMethodId(32), Implemented, Description("Water Cooling feature capability")] void IsSupportWaterCooling ([out, Description("Water Cooling feature capability")] UINT32 Data); + [WmiMethodId(33), Implemented, Description("Set Water Cooling status")] void SetWaterCoolingStatus ([in, Description("Set Water Cooling status")] UINT32 Data); + [WmiMethodId(34), Implemented, Description("Get Water Cooling status")] void GetWaterCoolingStatus ([out, Description("Get Water Cooling status")] UINT32 Data); + [WmiMethodId(35), Implemented, Description("Lighting feature capability")] void IsSupportLightingFeature ([out, Description("Lighting feature capability")] UINT32 Data); + [WmiMethodId(36), Implemented, Description("Set keyboard light off or on to max")] void SetKeyboardLight ([in, Description("keyboard light off or on switch")] UINT32 Data); + [WmiMethodId(37), Implemented, Description("Get keyboard light on/off status")] void GetKeyboardLight ([out, Description("Get keyboard light on/off status")] UINT32 Data); + [WmiMethodId(38), Implemented, Description("Get Macrokey scan code")] void GetMacrokeyScancode ([in, Description("Macrokey index")] UINT32 idx, [out, Description("Scan code")] UINT32 scancode); + [WmiMethodId(39), Implemented, Description("Get Macrokey count")] void GetMacrokeyCount ([out, Description("Macrokey count")] UINT32 Data); + [WmiMethodId(40), Implemented, Description("Support G-Sync feature")] void IsSupportGSync ([out, Description("Support G-Sync feature")] UINT32 Data); + [WmiMethodId(41), Implemented, Description("Get G-Sync Status")] void GetGSyncStatus ([out, Description("Get G-Sync Status")] UINT32 Data); + [WmiMethodId(42), Implemented, Description("Set G-Sync Status")] void SetGSyncStatus ([in, Description("Set G-Sync Status")] UINT32 Data); + [WmiMethodId(43), Implemented, Description("Support Smart Fan feature")] void IsSupportSmartFan ([out, Description("Support Smart Fan feature")] UINT32 Data); + [WmiMethodId(44), Implemented, Description("Set Smart Fan Mode")] void SetSmartFanMode ([in, Description("Set Smart Fan Mode")] UINT32 Data); + [WmiMethodId(45), Implemented, Description("Get Smart Fan Mode")] void GetSmartFanMode ([out, Description("Get Smart Fan Mode")] UINT32 Data); + [WmiMethodId(46), Implemented, Description("Get Smart Fan Setting Mode")] void GetSmartFanSetting ([out, Description("Get Smart Setting Mode")] UINT32 Data); + [WmiMethodId(47), Implemented, Description("Get Power Charge Mode")] void GetPowerChargeMode ([out, Description("Get Power Charge Mode")] UINT32 Data); + [WmiMethodId(48), Implemented, Description("Get Gaming Product Info")] void GetProductInfo ([out, Description("Get Gaming Product Info")] UINT32 Data); + [WmiMethodId(49), Implemented, Description("Over Drive feature capability")] void IsSupportOD ([out, Description("Over Drive feature capability")] UINT32 Data); + [WmiMethodId(50), Implemented, Description("Get Over Drive status")] void GetODStatus ([out, Description("Get Over Drive status")] UINT32 Data); + [WmiMethodId(51), Implemented, Description("Set Over Drive status")] void SetODStatus ([in, Description("Set Over Drive status")] UINT32 Data); + [WmiMethodId(52), Implemented, Description("Set Light Control Owner")] void SetLightControlOwner ([in, Description("Set Light Control Owner")] UINT32 Data); + [WmiMethodId(53), Implemented, Description("Set DDS Control Owner")] void SetDDSControlOwner ([in, Description("Set DDS Control Owner")] UINT32 Data); + [WmiMethodId(54), Implemented, Description("Get the flag of restore OC value")] void IsRestoreOCValue ([in, Description("Clean this flag")] UINT32 idx, [out, Description("Restore oc value flag")] UINT32 Data); + [WmiMethodId(55), Implemented, Description("Get Real Thremal Mode")] void GetThermalMode ([out, Description("Real Thremal Mode")] UINT32 Data); + [WmiMethodId(56), Implemented, Description("Get the OC switch status in BIOS")] void GetBIOSOCMode ([out, Description("OC Mode")] UINT32 Data); + [WmiMethodId(59), Implemented, Description("Get hardware info support version")] void GetHardwareInfoSupportVersion ([out, Description("version")] UINT32 Data); + [WmiMethodId(60), Implemented, Description("Get Cpu core 0 max frequency")] void GetCpuFrequency ([out, Description("frequency")] UINT32 Data); + [WmiMethodId(62), Implemented, Description("Check the Adapter type fit for OC")] void IsACFitForOC ([out, Description("AC check result")] UINT32 Data); + [WmiMethodId(63), Implemented, Description("Is support IGPU mode")] void IsSupportIGPUMode ([out, Description("IGPU modes")] UINT32 Data); + [WmiMethodId(64), Implemented, Description("Get IGPU Mode Status")] void GetIGPUModeStatus([out, Description("IGPU Mode Status")] UINT32 Data); + [WmiMethodId(65), Implemented, Description("Set IGPU Mode")] void SetIGPUModeStatus([in, Description("IGPU Mode")] UINT32 mode, [out, Description("return code")] UINT32 Data); + [WmiMethodId(66), Implemented, Description("Notify DGPU Status")] void NotifyDGPUStatus([in, Description("DGPU status")] UINT32 status, [out, Description("return code")] UINT32 Data); + [WmiMethodId(67), Implemented, Description("Is changed Y log")] void IsChangedYLog([out, Description("Is changed Y Log")] UINT32 Data); + [WmiMethodId(68), Implemented, Description("Get DGPU Hardwawre ID")] void GetDGPUHWId([out, Description("Get DGPU Hardware ID")] string Data); + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Definition of CPU OC parameter list"), guid("{B7F3CA0A-ACDC-42D2-9217-77C6C628FBD2}")] + class LENOVO_GAMEZONE_CPU_OC_DATA { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description("OC tune id.")] uint32 Tuneid; + [WmiDataId(2), read, Description("Default value.")] uint32 DefaultValue; + [WmiDataId(3), read, Description("OC Value.")] uint32 OCValue; + [WmiDataId(4), read, Description("Min Value.")] uint32 MinValue; + [WmiDataId(5), read, Description("Max Value.")] uint32 MaxValue; + [WmiDataId(6), read, Description("Scale Value.")] uint32 ScaleValue; + [WmiDataId(7), read, Description("OC Order id.")] uint32 OCOrderid; + [WmiDataId(8), read, Description("NON-OC Order id.")] uint32 NOCOrderid; + [WmiDataId(9), read, Description("Delay time in ms.")] uint32 Interval; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Definition of GPU OC parameter list"), guid("{887B54E2-DDDC-4B2C-8B88-68A26A8835D0}")] + class LENOVO_GAMEZONE_GPU_OC_DATA { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description("P-State ID.")] uint32 PStateID; + [WmiDataId(2), read, Description("CLOCK ID.")] uint32 ClockID; + [WmiDataId(3), read, Description("Default value.")] uint32 defaultvalue; + [WmiDataId(4), read, Description("OC Offset freqency.")] uint32 OCOffsetFreq; + [WmiDataId(5), read, Description("OC Min offset value.")] uint32 OCMinOffset; + [WmiDataId(6), read, Description("OC Max offset value.")] uint32 OCMaxOffset; + [WmiDataId(7), read, Description("OC Offset Scale.")] uint32 OCOffsetScale; + [WmiDataId(8), read, Description("OC Order id.")] uint32 OCOrderid; + [WmiDataId(9), read, Description("NON-OC Order id.")] uint32 NOCOrderid; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Fancooling finish event"), guid("{BC72A435-E8C1-4275-B3E2-D8B8074ABA59}")] + class LENOVO_GAMEZONE_FAN_COOLING_EVENT: WMIEvent { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description("Fancooling clean finish event")] uint32 EventId; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Smart Fan mode change event"), guid("{D320289E-8FEA-41E0-86F9-611D83151B5F}")] + class LENOVO_GAMEZONE_SMART_FAN_MODE_EVENT: WMIEvent { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description("Smart Fan Mode change event")] uint32 mode; + [WmiDataId(2), read, Description("version of FN+Q")] uint32 version; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Smart Fan setting mode change event"), guid("{D320289E-8FEA-41E1-86F9-611D83151B5F}")] + class LENOVO_GAMEZONE_SMART_FAN_SETTING_EVENT: WMIEvent { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description("Smart Fan Setting mode change event")] uint32 mode; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("POWER CHARGE MODE Change EVENT"), guid("{D320289E-8FEA-41E0-86F9-711D83151B5F}")] + class LENOVO_GAMEZONE_POWER_CHARGE_MODE_EVENT: WMIEvent { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description("POWER CHARGE MODE Change EVENT")] uint32 mode; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Thermal Mode Real Mode change event"), guid("{D320289E-8FEA-41E0-86F9-911D83151B5F}")] + class LENOVO_GAMEZONE_THERMAL_MODE_EVENT: WMIEvent { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description("Thermal Mode Real Mode")] uint32 mode; + }; diff --git a/Documentation/wmi/devices/lenovo-wmi-other.rst b/Documentation/wmi/devices/lenovo-wmi-other.rst new file mode 100644 index 000000000000..d7928b8dfb4b --- /dev/null +++ b/Documentation/wmi/devices/lenovo-wmi-other.rst @@ -0,0 +1,108 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +=========================================================== +Lenovo WMI Interface Other Mode Driver (lenovo-wmi-other) +=========================================================== + +Introduction +============ +Lenovo WMI Other Mode interface is broken up into multiple GUIDs, +The primary Other Mode interface provides advanced power tuning features +such as Package Power Tracking (PPT). It is paired with multiple data block +GUIDs that provide context for the various methods. + + +Other Mode +---------- + +WMI GUID ``DC2A8805-3A8C-41BA-A6F7-092E0089CD3B`` + +The Other Mode WMI interface uses the firmware_attributes class to expose +various WMI attributes provided by the interface in the sysfs. This enables +CPU and GPU power limit tuning as well as various other attributes for +devices that fall under the "Gaming Series" of Lenovo devices. Each +attribute exposed by the Other Mode interface has corresponding +capability data blocks which allow the driver to probe details about the +attribute. Each attribute has multiple pages, one for each of the platform +profiles managed by the Gamezone interface. Attributes are exposed in sysfs +under the following path: + +:: + + /sys/class/firmware-attributes/lenovo-wmi-other/attributes/<attribute>/ + +LENOVO_CAPABILITY_DATA_01 +------------------------- + +WMI GUID ``7A8F5407-CB67-4D6E-B547-39B3BE018154`` + +The LENOVO_CAPABILITY_DATA_01 interface provides information on various +power limits of integrated CPU and GPU components. + +Each attribute has the following properties: + - current_value + - default_value + - display_name + - max_value + - min_value + - scalar_increment + - type + +The following attributes are implemented: + - ppt_pl1_spl: Platform Profile Tracking Sustained Power Limit + - ppt_pl2_sppt: Platform Profile Tracking Slow Package Power Tracking + - ppt_pl3_fppt: Platform Profile Tracking Fast Package Power Tracking + + +WMI interface description +========================= + +The WMI interface description can be decoded from the embedded binary MOF (bmof) +data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: + +:: + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("LENOVO_OTHER_METHOD class"), guid("{dc2a8805-3a8c-41ba-a6f7-092e0089cd3b}")] + class LENOVO_OTHER_METHOD { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiMethodId(17), Implemented, Description("Get Feature Value ")] void GetFeatureValue([in] uint32 IDs, [out] uint32 value); + [WmiMethodId(18), Implemented, Description("Set Feature Value ")] void SetFeatureValue([in] uint32 IDs, [in] uint32 value); + [WmiMethodId(19), Implemented, Description("Get Data By Command ")] void GetDataByCommand([in] uint32 IDs, [in] uint32 Command, [out] uint32 DataSize, [out, WmiSizeIs("DataSize")] uint32 Data[]); + [WmiMethodId(99), Implemented, Description("Get Data By Package for TAC")] void GetDataByPackage([in, Max(40)] uint8 Input[], [out] uint32 DataSize, [out, WmiSizeIs("DataSize")] uint8 Data[]); + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("LENOVO CAPABILITY DATA 00"), guid("{362a3afe-3d96-4665-8530-96dad5bb300e}")] + class LENOVO_CAPABILITY_DATA_00 { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description(" IDs.")] uint32 IDs; + [WmiDataId(2), read, Description("Capability.")] uint32 Capability; + [WmiDataId(3), read, Description("Capability Default Value.")] uint32 DefaultValue; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("LENOVO CAPABILITY DATA 01"), guid("{7a8f5407-cb67-4d6e-b547-39b3be018154}")] + class LENOVO_CAPABILITY_DATA_01 { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description(" IDs.")] uint32 IDs; + [WmiDataId(2), read, Description("Capability.")] uint32 Capability; + [WmiDataId(3), read, Description("Default Value.")] uint32 DefaultValue; + [WmiDataId(4), read, Description("Step.")] uint32 Step; + [WmiDataId(5), read, Description("Minimum Value.")] uint32 MinValue; + [WmiDataId(6), read, Description("Maximum Value.")] uint32 MaxValue; + }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("LENOVO CAPABILITY DATA 02"), guid("{bbf1f790-6c2f-422b-bc8c-4e7369c7f6ab}")] + class LENOVO_CAPABILITY_DATA_02 { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, Description(" IDs.")] uint32 IDs; + [WmiDataId(2), read, Description("Capability.")] uint32 Capability; + [WmiDataId(3), read, Description("Data Size.")] uint32 DataSize; + [WmiDataId(4), read, Description("Default Value"), WmiSizeIs("DataSize")] uint8 DefaultValue[]; + }; |