1 files changed, 82 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml
new file mode 100644
index 000000000000..b4f58ed25993
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/xlnx,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Interrupt Controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description:
+  The controller is a soft IP core that is configured at build time for the
+  number of interrupts and the type of each interrupt. These details cannot
+  be changed at run time.
+
+properties:
+  compatible:
+    const: xlnx,xps-intc-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      Specifies the number of cells needed to encode an interrupt source.
+      The value shall be a minimum of 1. The Xilinx device trees typically
+      use 2 but the 2nd value is not used.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specifies the interrupt of the parent controller from which it is chained.
+
+  xlnx,kind-of-intr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A 32 bit value specifying the interrupt type for each possible interrupt
+      (1 = edge, 0 = level). The interrupt type typically comes in thru
+      the device tree node of the interrupt generating device, but in this case
+      the interrupt type is determined by the interrupt controller based on how
+      it was implemented.
+
+  xlnx,num-intr-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Specifies the number of interrupts supported by the specific
+      implementation of the controller.
+
+required:
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+  - xlnx,kind-of-intr
+  - xlnx,num-intr-inputs
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@41800000 {
+      compatible = "xlnx,xps-intc-1.00.a";
+      reg = <0x41800000 0x10000>;
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      xlnx,kind-of-intr = <0x1>;
+      xlnx,num-intr-inputs = <1>;
+    };