| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
|
|
When building with CONFIG_KSTACK_ERASE=y and CONFIG_ARM_ATAG_DTB_COMPAT=y,
the compressed boot environment encounters an undefined symbol error:
ld.lld: error: undefined symbol: __sanitizer_cov_stack_depth
>>> referenced by atags_to_fdt.c:135
This occurs because the compiler instruments the atags_to_fdt() function
with sanitizer coverage calls, but the minimal compressed boot environment
lacks access to sanitizer runtime support.
The compressed boot environment already disables stack protector with
-fno-stack-protector. Similarly disable sanitizer coverage by adding
$(DISABLE_KSTACK_ERASE) to the general compiler flags (and remove it
from the one place it was noticed before), which contains the appropriate
flags to prevent sanitizer instrumentation.
This follows the same pattern used in other early boot contexts where
sanitizer runtime support is unavailable.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtBk8qnpWvoaFwymCx5s5i-5KXtPGpmf=_+UKJddCOnLA@mail.gmail.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20250726004313.GA3650901@ax162
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.17
This update includes:
- controllers enabled for SAMA7D65 SoC (crypto controllers, PWM, CAN)
- controllers enabled for SAM9X7 SoC (LCD, LVDS)
- cache configuration updates for SAMA5D2, SAMA5D3, SAMA5D4, SAMA7G5,
SAMA7D65
- cleanups
* tag 'at91-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (22 commits)
ARM: dts: microchip: sama7g5: Add cache configuration for cpu node
ARM: dts: microchip: sama7d65: Add cache configuration for cpu node
ARM: dts: microchip: sama5d4: Update the cache configuration for CPU
ARM: dts: microchip: sama5d3: Update the cache configuration for CPU
ARM: dts: microchip: sama5d2: Update the cache configuration for CPU
ARM: dts: microchip: sam9x7: Add LVDS controller
ARM: dts: microchip: sama5d2_icp: rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
ARM: dts: microchip: sama5d27_wlsom1: rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
ARM: dts: microchip: sama5d27_som1: rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
ARM: dts: microchip: sam9x60ek: rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
ARM: dts: at91-sama5d27_wlsom1: Improve the Wifi compatible
ARM: dts: microchip: gardena-smart-gateway: Fix power LED
ARM: dts: microchip: sam9x7: Add clock name property
ARM: dts: microchip: sama7d65: Add clock name property
ARM: dts: microchip: sama7g5: Adjust clock xtal phandle
ARM: dts: microchip: sam9x7: Add HLCD controller
ARM: dts: microchip: sama7d65: Enable CAN bus
ARM: dts: microchip: sama7d65: Clean up extra space
ARM: dts: microchip: sama7d65: Add CAN bus support
ARM: dts: microchip: sama7d65: Add PWM support
...
Link: https://lore.kernel.org/r/20250721100904.568575-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Common name for Ethernet controllers is "ethernet", not "eth", also
recommended by Devicetree specification in "Generic Names
Recommendation". Verified lack of impact using dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250717142245.92492-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.17 (part 1)
Use recent scl/sda gpio bindings on kirkwood boards (Keymile ones)
* tag 'mvebu-dt-6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: marvell: kirkwood: use recent scl/sda gpio bindings
Link: https://lore.kernel.org/r/87ms94xzr8.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.17
This branch includes a change shared with the clk tree for adding
the missing PPU0 reset on the A523.
The PM domain DT binding immutable branch is also included, which
brings in v6.16-rc2, as well as PM domain bindings for other platforms.
Other changes include:
- RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins
- node order fixes for the A523 dtsi
- UART1 pin definitions for A523
- Allwinner board DT binding cleanup
- EMAC support on A100/A133
- Enabled on the Liontron H-A133L board
- SID efuse, power controllers and GPU added for A523
- A523 GPU enabled on all existing boards
New boards:
- Xunlong OrangePi 4A with the Allwinner T527 SoC.
* tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
arm64: dts: allwinner: a523: enable Mali GPU for all boards
arm64: dts: allwinner: a523: add Mali GPU node
arm64: dts: allwinner: a523: Add power controller device nodes
dt-bindings: power: Add A523 PPU and PCK600 power controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support
arm64: dts: allwinner: a100: Add EMAC support
arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII
dt-bindings: arm: sunxi: Combine board variants into enums
dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains
arm64: dts: allwinner: t527: Add OrangePi 4A board
arm64: dts: allwinner: a523: Add UART1 pins
arm64: dts: allwinner: a523: Move rgmii0 pins to correct location
arm64: dts: allwinner: a523: Move mmc nodes to correct position
dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board
ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition
ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen
dt-bindings: rockchip: pmu: Add compatible for RK3528
...
Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.17
Add aliases for MMC controllers on MSM8974, enable USB charging on the
Sony Xperia Rhine platform and add new DeviceTree for the Sony Xperia Z
Ultra device.
Tidy up interrupts specifiers on MSM8960, by using macro constants.
* tag 'qcom-arm32-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-sony-xperia-rhine: Add alias for mmc0 & mmc1
ARM: dts: qcom: msm8974-hammerhead: Add alias for mmc0
ARM: dts: qcom: msm8974-oneplus-bacon: Add alias for mmc0
ARM: dts: qcom: Add initial support for Sony Xperia Z Ultra (togari)
dt-bindings: arm: qcom: Add Sony Xperia Z Ultra (togari)
ARM: dts: qcom: msm8974-sony-xperia-rhine: Move camera buttons to amami & honami
ARM: dts: qcom: msm8974-sony-xperia-rhine: Enable USB charging
ARM: dts: qcom: msm8960: use macros for interrupts
ARM: dts: qcom: Align wifi node name with bindings
Link: https://lore.kernel.org/r/20250715021838.14751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.17:
- New device trees for Engicam MicroGEA-MX6UL and i.MX28 Amarula board
- A couple of changes from Bence Csókás to replace license text comment
with SPDX identifier for Karo and Gateworks boards
- A couple of imx7s-warp updates from Fabio Estevam to improve Bluetooth
and Wifi description
- A set of dt-schema fixes for VF610 based boards from Frank Li
- A couple of imx6ul-kontron-sl-common changes to add SPI NOR partitions
and correct QSPI NAND node name
- A few other random improvements
* tag 'imx-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits)
ARM: dts: imx6-gw: Replace license text comment with SPDX identifier
ARM: dts: imx6ul-kontron-sl-common: Fix QSPI NAND node name
ARM: dts: imx6ul-kontron-sl-common: Add SPI NOR partitions
ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface
ARM: dts: imx6-karo: Replace license text comment with SPDX identifier
ARM: dts: imx6ul: support Engicam MicroGEA GTW board
ARM: dts: imx6ul: support Engicam MicroGEA RMM board
ARM: dts: imx6ul: support Engicam MicroGEA BMM board
ARM: dts: imx6ul: support Engicam MicroGEA-MX6UL SoM
ARM: dts: mxs: support i.MX28 Amarula rmm board
ARM: dts: imx28: add pwm7 muxing options
ARM: dts: vf: vf610-zii-cfu1: rename node name *-gpio to *-gpios
ARM: dts: vf: vf-colibri-eval-v3: add power-supply for edt,et057090dhu
ARM: dts: vf: rename io-expander@20 to pinctrl@20
ARM: dts: vf: remove redundant layer under iomux
ARM: dts: vf: remove redundant pinctrl-names
ARM: dts: vf: remove reg property for arm pmu
ARM: dts: vfxxx: Correctly use two tuples for timer address
ARM: dts: add ngpios for vf610 compatible gpio controllers
ARM: dts: imx7s-warp: Improve the Wifi description
...
Link: https://lore.kernel.org/r/20250713055441.221235-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.17-rc1
Add support for two Tegra30 ASUS devices and enable the embedded
controller on Pegatron Chagall.
* tag 'tegra-for-6.17-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: chagall: Add embedded controller node
ARM: tegra: Add device-tree for Asus Portable AiO P1801-T
ARM: tegra: Add device-tree for ASUS VivoTab RT TF600T
Link: https://lore.kernel.org/r/20250711220943.2389322-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek mach ARM32 updates
This adds support for the MediaTek MT6572 SoC, found in various
old smartphones and tablets from various manufacturers.
In particular, this adds a board_dt_compat entry for this SoC
and its SMP bring up sequence to enable secondary cores.
* tag 'mtk-dts32-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: add basic support for Lenovo A369i board
ARM: dts: mediatek: add basic support for JTY D101 board
ARM: dts: mediatek: add basic support for MT6572 SoC
dt-bindings: arm: mediatek: add boards based on the MT6572 SoC
dt-bindings: vendor-prefixes: add JTY
dt-bindings: watchdog: mediatek,mtk-wdt: add MT6572
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: add MT6572
Link: https://lore.kernel.org/r/20250711083656.33538-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
arm: dts: OMAP updates for v6.17
- new board support: Seeed BeagleBone Green Eco
- misc. fixups / cleanups
* tag 'omap-for-v6.17/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
arm: dts: ti: omap: Fixup pinheader typo
ARM: dts: am335x-pdu001: Fix RS-485 transceiver switching
arm: dts: omap: Add support for BeagleBone Green Eco board
dt-bindings: omap: Add Seeed BeagleBone Green Eco
arm: dts: omap: am335x-bone-common: Rename tps to generic pmic node
Revert "ARM: dts: Update pcie ranges for dra7"
ARM: dts: omap: am335x: Use non-deprecated rts-gpios
Link: https://lore.kernel.org/r/7h7c0gxczy.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.17, round 1
Highlights:
----------
- MPU:
- STM32MP13:
-Add Ethernet MAC adress efuse support.
- STMP32MP15:
- Add stm32mp157f-DK2 board support. This board embedds the same
conectivity devices, DDR ... than stm32mp157c-dk2.
However there are two differences: STM32MP157F SoC which allows
overdrive OPP and the SCMI support for system features like
clocks and regulators.
- STM32MP25:
- Fix tick timer for low power use cases.
- Add timer support.
* tag 'stm32-dt-for-v6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: remove empty line in stm32mp251.dtsi
arm64: dts: st: fix timer used for ticks
arm64: defconfig: Enable STM32 Octo Memory Manager and OcstoSPI driver
ARM: dts: stm32: add stm32mp157f-dk2 board support
dt-bindings: arm: stm32: add STM32MP157F-DK2 board compatible
ARM: dts: stm32: optee async notif interrupt for MP15 scmi variants
ARM: dts: stm32: use internal regulators bindings for MP15 scmi variants
dt-bindings: regulator: Add STM32MP15 SCMI regulator identifiers
ARM: dts: stm32: use 'typec' generic name for stusb1600 on stm32mp15xx-dkx
ARM: dts: stm32: fullfill diversity with OPP for STM32M15xF SOCs
ARM: dts: stm32: add system-clock-direction-out on stm32mp15xx-dkx
arm64: defconfig: enable STM32 timers drivers
arm64: dts: st: add timer nodes on stm32mp257f-ev1
arm64: dts: st: add timer pins for stm32mp257f-ev1
arm64: dts: st: add timer nodes on stm32mp251
ARM: dts: stm32: Add nvmem-cells to ethernet nodes for constant mac-addresses
Link: https://lore.kernel.org/r/b3e3363b-1ea5-457c-b244-2cbe26f7d6e4@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
ASPEED devicetree updates for 6.17
Removed platforms:
- IBM's Swift BMC
New platforms:
- Meta's Santabarbara
Santabarbara is a compute node with an accelerator module
- NVIDIA's GB200NVL BMC
NVIDIA GB200 NVL72 connects 36 Grace CPUs and 72 Blackwell GPUs in an NVIDIA
NVLink-connected, liquid-cooled, rack-scale design.
Updated BMC platforms:
- Bletchley (Meta): GPIO hog names, remove ethernet-phy node, USB PD negotiation
- Catalina (Meta): Various sensors added, MCTP support for NIC management
- Harma (Meta): Various sensors added
- System1 (IBM): IPMB and various GPIO-related updates
- Yosemite4 (Meta): GPIO names for UART mux select lines
The System1 series includes a devicetree binding patch for IPMI IPMB devices.
* tag 'aspeed-6.17-devicetree-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux: (34 commits)
ARM: dts: aspeed: yosemite4: add gpio name for uart mux sel
ARM: dts: aspeed: santabarbara: Add Meta Santabarbara BMC
dt-bindings: arm: aspeed: add Meta Santabarbara board
ARM: dts: aspeed: bletchley: enable USB PD negotiation
ARM: dts: aspeed: lanyang: Fix 'lable' typo in LED nodes
ARM: dts: aspeed: harma: add mmc health
ARM: dts: aspeed: Harma: revise gpio bride pin for battery
ARM: dts: aspeed: harma: add ADC128D818 for voltage monitoring
ARM: dts: aspeed: harma: add fan board I/O expander
ARM: dts: aspeed: harma: add E1.S power monitor
ARM: dts: aspeed: catalina: Enable MCTP for frontend NIC management
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
ARM: dts: aspeed: catalina: Enable MCTP support for NIC management
ARM: dts: aspeed: catalina: Update CBC FRU EEPROM I2C bus and address
ARM: dts: aspeed: catalina: Enable multi-master on additional I2C buses
ARM: dts: aspeed: catalina: Remove INA238 and INA230 nodes
ARM: dts: aspeed: catalina: Add second source HSC node support
ARM: dts: aspeed: catalina: Add second source fan controller support
ARM: dts: aspeed: catalina: Add fan controller support
...
Link: https://lore.kernel.org/r/36d50489cac1fbae01ec699b742f6c6c459a01cb.camel@codeconstruct.com.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.17
Just few cleanups based on dtbs_check.
* tag 'samsung-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: Align i2c-gpio node names with dtschema
ARM: dts: exynos: Align i2c-gpio node names with dtschema
Link: https://lore.kernel.org/r/20250709191523.171359-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
VT8500 DTS ARM changes for v6.17
1. Several dtbs_check cleanups.
2. Add missing cache topology - L2 cache controller on WM8850/WM895.
* tag 'dt-vt8500-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: vt8500: Add L2 cache controller on WM8850/WM8950
ARM: dts: vt8500: Fix the unit address of the VT8500 LCD controller
ARM: dts: vt8500: Use generic node name for the SD/MMC controller
ARM: dts: vt8500: Move memory nodes to board dts and fix addr/size
ARM: dts: vt8500: Add node address and reg in CPU nodes
Link: https://lore.kernel.org/r/20250709184800.168462-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add embedded controller node to Pegatron Chagall device-tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250429061803.9581-5-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a device-tree for the Asus Portable AiO P1801-T, which is a NVIDIA
Tegra30-based 2-in-1 detachable tablet, originally running Android.
The tablet was also sold together with a PC docking station as the
Transformer AiO P1801.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # P1801-T with dock
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250616073947.13675-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This smartphone uses a MediaTek MT6572 system-on-chip with 512MB of RAM.
It can currently boot into initramfs with a working UART and
Simple Framebuffer using already initialized panel by the bootloader.
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-11-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
This tablet uses a MediaTek MT6572 system-on-chip with 1GB of RAM.
It can currently boot into initramfs with a working UART and
Simple Framebuffer using already initialized panel by the bootloader.
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-10-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add basic support for the MediaTek MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-9-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Replace verbatim license text with a `SPDX-License-Identifier`.
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Rename QSPI NAND node to 'flash@0' in order to fix the following
dt-schema warning:
spi-flash@0 (spi-nand): $nodename:0: 'spi-flash@0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Describe the partitions for the bootloader and the environment
on the SPI NOR. While at it also fix the order of the properties
in the flash node itself.
Signed-off-by: Eberhard Stoll <eberhard.stoll@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.
Signed-off-by: Annette Kobou <annette.kobou@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device-tree for ASUS VivoTab RT TF600T, which is NVIDIA Tegra30-based
tablet device with Windows RT.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250617070320.9153-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This commit fixes a typo introduced in commit
ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names").
gpio0_7 is located on the P9 header on the BBB.
This was verified with a BeagleBone Black by toggling the pin and
checking with a multimeter that it corresponds to pin 42 on the P9
header.
Signed-off-by: Albin Törnqvist <albin.tornqvist@codiax.se>
Link: https://lore.kernel.org/r/20250624114839.1465115-2-albin.tornqvist@codiax.se
Fixes: ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The wiring of the RS-485 transceiver of UART0 of the PDU-001 board
allows sending or receiving date exclusively. In other words: no
character transmitted will ever be received.
Hence the tx-filter counter in the OMAP serial driver can't work
correctly as it relies on receiving the transmitted characters.
This in turn will prevent reception of data unless we disable the
tx-filter counter.
This patch disables the tx-filter counter by enabling the DTS setting
rs485-rx-during-tx. This might sound like the opposite to be done but
it uses the enabling of rs485-rx-during-tx not for receiving the data
transmitted but for disabling the tx-fiter counter.
Tested-by: Felix Brack <fb@ltec.ch>
Signed-off-by: Felix Brack <fb@ltec.ch>
Link: https://lore.kernel.org/r/20250529135324.182868-1-fb@ltec.ch
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
We have dedictaded bindings for scl/sda nowadays. Switch away from the
deprecated plain 'gpios' property.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Replace verbatim license text with a `SPDX-License-Identifier`
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Describe the cache memories according with datasheet chapter 15.2:
- L1 cache configuration with 32KB for both data and instruction cache.
- L2 cache configuration with 256KB unified cache.
Before this patch the kernel reported the warning:
[ 0.171425] cacheinfo: Unable to detect cache hierarchy for CPU 0
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250619070636.8844-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Describe the cache memories according with datasheet chapter 15.2:
- L1 cache configuration with 32KB for both data and instruction cache.
- L2 cache configuration with 256KB unified cache.
Before this patch the kernel reported the warning:
[ 0.161955] cacheinfo: Unable to detect cache hierarchy for CPU 0
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250619070636.8844-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add the memory size properties for L1 and L2 according with block
diagram from datasheet:
- L1 cache configuration with 32 KB for both data and instruction cache.
- L2 cache configuration with 128 KB unified cache.
[root@sama5d4 ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Vendor ID: ARM
Model name: Cortex-A5
Caches (sum of all):
L1d: 32 KiB (1 instance)
L1i: 32 KiB (1 instance)
L2: 128 KiB (1 instance)
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250625064934.4828-4-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add the memory size properties for L1 according with block
diagram from datasheet:
- L1 cache configuration with 32 KB for both data and instruction cache.
[root@sama5d3 ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Vendor ID: ARM
Model name: Cortex-A5
Caches (sum of all):
L1d: 32 KiB (1 instance)
L1i: 32 KiB (1 instance)
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250625064934.4828-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add the memory size properties for L1 and L2 according with block
diagram from datasheet:
- L1 cache configuration with 32 KB for both data and instruction cache.
- L2 cache configuration with 128 KB unified cache.
[root@sama5d2 ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Vendor ID: ARM
Model name: Cortex-A5
Caches (sum of all):
L1d: 32 KiB (1 instance)
L1i: 32 KiB (1 instance)
L2: 128 KiB (1 instance)
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250625064934.4828-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
STM32MP157F-DK2 board embeds a STM32MP157F SoC. This SoC contains the same
level of feature than a STM32MP157C SOC but A7 clock frequency can reach
800MHz, hence the inclusion of the newly introduced stm32mp15xf.dtsi.
As for other latest STM32 MPU families, STM32MP157F-DK2 relies on OP-TEE
SCMI services for SoC clock and reset controllers resources, and for PMIC,
now under OP-TEE control. That's why stm32mp157f-dk2-scmi.dtsi is
introduced, to move all clocks, resets and regulators to SCMI-based ones.
To "disable" SCMI, just need to comment stm32mp157f-dk2-scmi.dtsi inclusion
and to replace &scmi_v3v3 with &v3v3, then to disable arm_wdt and to enable
i2c4 and its subnodes for PMIC support by Linux. Reconfigure usbotg for
dual role with type-C support if needed.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-7-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Define the interrupt used by OP-TEE async notif on stm32mp15 scmi based
platforms.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-5-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Use the SCMI voltage domain bindings for internal regulators on stm32mp15.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-4-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Adopt generic node name 'typec' for stusb1600, which is the USB Type-C
controller on stm32mp157x Discovery Kits.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-2-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
This commit creates new file to manage security features and supported OPP
on STM32MP15xF SOCs. On STM32MP15xY, "Y" gives information:
-Y = A means no cryp IP and no secure boot + A7-CPU@650MHz.
-Y = C means cryp IP + optee + secure boot + A7-CPU@650MHz.
-Y = D means no cryp IP and no secure boot + A7-CPU@800MHz.
-Y = F means cryp IP + optee + secure boot + A7-CPU@800MHz.
It fullfills the initial STM32MP15x SoC diversity introduced by
commit 0eda69b6c5f9 ("ARM: dts: stm32: Manage security diversity
for STM32M15x SOCs").
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-1-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The commit 5725bce709db
("ASoC: simple-card-utils: Unify clock direction by clk_direction")
corrupts the audio on STM32MP15 DK sound cards.
The parent clock is not correctly set, because set_sai_ck_rate() is not
executed in stm32_sai_set_sysclk() callback.
This occurs because set_sysclk() is called with the wrong direction,
SND_SOC_CLOCK_IN instead of SND_SOC_CLOCK_OUT.
Add system-clock-direction-out property in SAI2A endpoint node of
STM32MP15XX-DKX device tree, to specify the MCLK clock direction.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250521150418.488152-1-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The efuse device tree description already has the two labels pointing to
the efuse nodes that specify the mac-addresses to be used. Wire them up
to the ethernet nodes. This is enough to make barebox pick the right
mac-addresses and pass them to Linux.
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250328171406.3307778-2-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add gpio line name to support multiplexed console
Signed-off-by: Marshall Zhan <marshall_zhan@wiwynn.com>
Link: https://patch.msgid.link/20250630073138.3315947-1-marshall_zhan@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Add linux device tree entry related to the Meta (Facebook) compute node
system using an AST2600 BMC.
This node is named "Santabarbara". It is a compute node with accelerator
module. The system monitors voltage and temperature for the CPU, switch,
and NIC components on the motherboard and switch board.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Link: https://patch.msgid.link/20250625073847.4054971-3-fredchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
- Enable USB Power Delivery with revision 2.0 for all sleds
- Configure dual power/data roles with sink preference
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://patch.msgid.link/20250622034247.3985727-1-chou.cosmo@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Fix an obvious spelling error in the DTS file for the Lanyang BMC
("lable" -> "label"). This was reported by bugzilla a few years ago
but never got fixed.
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=205891
Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com>
Link: https://patch.msgid.link/20250612075057.80433-1-ankitchauhan2065@gmail.com
[arj: Replace U+2192 with '->']
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Add a GPIO expander node at address 0x13 on i2c11 bus
to monitor MMC health status via a dedicated GPIO line.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250611080514.3123335-6-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Update the GPIO bridge pin configuration for the battery circuit
on the Harma platform to reflect the correct hardware design.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250611080514.3123335-5-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
