Merge tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony
Lindgren:

Wireless and omap changes to make wl12xx driver to use device tree
data instead of platform data from Eliad Peller <eliad@wizery.com>:

- Add device-tree support to the wlcore (wl12xx/wl18xx) driver.

- Update the current users to use the bindings instead of pdata-quirks.

- Finally, remove the deprecated wl12xx_platform_data struct

Note that da850 board file code that still uses the platform data,
but we have da850.dtsi that can be used instead. So it was decided
that we should try to remove the wl12xx support from the da850
board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's
the last patch in the series, the last patch can be simply reverted
if needed.

As this series touches quite a bit of arch code, it was suggested
by Kalle Valo <kvalo@codeaurora.org> that the whole series should
be merged via the arm-soc tree.

* tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  wlcore: remove wl12xx_platform_data
  ARM: dts: add wl12xx/wl18xx bindings
  wlcore: add device-tree support
  dt: bindings: add TI's wilink wireless device
  wl12xx: use frequency instead of enumerations for pdata clocks
  wlcore: set irq_trigger in board files instead of hiding behind a quirk
  + Linux 4.0-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

50 files changed, 784 insertions, 69 deletions

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 2c6248d9a9ef..c3255e0c90aa 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -301,3 +301,11 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 };
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 83d40f7655e5..6b8493720424 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -24,11 +24,3 @@
 &mmc1 {
 	vmmc-supply = <&ldo3_reg>;
 };
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index df5fee6b6b4b..87fc7a35e802 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -15,6 +15,7 @@
 
 #include "am33xx.dtsi"
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "TI AM335x EVM-SK";
@@ -647,6 +648,16 @@
 	cap-power-off-card;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &mcasp1 {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 7266a00aab2e..5c5667a3624d 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -328,6 +328,10 @@
 	dual_emac_res_vlan = <3>;
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index 712edce7d6fb..071b56aa0c7e 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -99,7 +99,7 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
@@ -107,7 +107,7 @@
 	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
@@ -115,7 +115,7 @@
 	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c7dc9dab93a4..cfb49686ab6a 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -107,7 +107,7 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
@@ -115,7 +115,7 @@
 	ehrpwm1_tbclk: ehrpwm1_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
@@ -123,7 +123,7 @@
 	ehrpwm2_tbclk: ehrpwm2_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
@@ -131,7 +131,7 @@
 	ehrpwm3_tbclk: ehrpwm3_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
@@ -139,7 +139,7 @@
 	ehrpwm4_tbclk: ehrpwm4_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
@@ -147,7 +147,7 @@
 	ehrpwm5_tbclk: ehrpwm5_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index ac2c5dd03663..e7f0a4ae271c 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -853,7 +853,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index e247b0b5fdab..d55fdf2487ef 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -124,11 +124,12 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9261-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&usb>, <&udc_clk>, <&udpck>;
-				clock-names = "usb_clk", "udc_clk", "udpck";
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
 				status = "disabled";
 			};
 
@@ -262,7 +263,7 @@
 			};
 
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix";
+				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 088219d1c8ce..fce301c4e9d6 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -856,7 +856,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9263-udc";
 				reg = <0xfff78000 0x4000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 119893181189..488af63d5174 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1300,7 +1300,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e77c9bb5485d..d221179d0f1a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1066,7 +1066,7 @@
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&usb>, <&udphs_clk>;
+				clocks = <&utmi>, <&udphs_clk>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 
@@ -1185,7 +1185,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 746cddb1b8f5..1933ce821311 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -263,17 +263,15 @@
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
-			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
-			0x418   (MUX_MODE15)	/* wakeup0.off */
+			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4d8711713610..48dbf0b03966 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -119,17 +119,15 @@
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
-			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			0x418   (PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
-			0x418   (MUX_MODE15)	/* wakeup0.off */
+			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2a9994f73974..3b933f74d000 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -243,10 +243,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_core_byp_mux: dpll_core_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
 	dpll_core_ck: dpll_core_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
@@ -309,10 +317,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_dsp_byp_mux: dpll_dsp_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0240>;
+	};
+
 	dpll_dsp_ck: dpll_dsp_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
 	};
 
@@ -335,10 +351,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_iva_byp_mux: dpll_iva_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
 	dpll_iva_ck: dpll_iva_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
@@ -361,10 +385,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_gpu_byp_mux: dpll_gpu_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02e4>;
+	};
+
 	dpll_gpu_ck: dpll_gpu_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
 	};
 
@@ -398,10 +430,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_ddr_byp_mux: dpll_ddr_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x021c>;
+	};
+
 	dpll_ddr_ck: dpll_ddr_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
@@ -416,10 +456,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_gmac_byp_mux: dpll_gmac_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02b4>;
+	};
+
 	dpll_gmac_ck: dpll_gmac_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
@@ -482,10 +530,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_eve_byp_mux: dpll_eve_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0290>;
+	};
+
 	dpll_eve_ck: dpll_eve_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
@@ -1249,10 +1305,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_per_byp_mux: dpll_per_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
 	dpll_per_ck: dpll_per_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
@@ -1275,10 +1339,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_usb_byp_mux: dpll_usb_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
 	dpll_usb_ck: dpll_usb_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 277b48b0b6f9..ac6b0ae42caf 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -18,6 +18,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
 
 / {
@@ -193,6 +194,7 @@
 			interrupts = <0 216 0>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
+			#include "exynos4412-tmu-sensor-conf.dtsi"
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
new file mode 100644
index 000000000000..735cb2f10817
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Device tree sources for Exynos4 thermal zone
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		thermal-sensors = <&tmu 0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			cpu_alert0: cpu-alert-0 {
+				temperature = <70000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert1: cpu-alert-1 {
+				temperature = <95000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert2: cpu-alert-2 {
+				temperature = <110000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_crit0: cpu-crit-0 {
+				temperature = <120000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+		cooling-maps {
+			map0 {
+				trip = <&cpu_alert0>;
+			};
+			map1 {
+				trip = <&cpu_alert1>;
+			};
+		};
+	};
+};
+};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 76173cacd450..77ea547768f4 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -38,6 +38,7 @@
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
+		i2c8 = &i2c_8;
 		csis0 = &csis_0;
 		csis1 = &csis_1;
 		fimc0 = &fimc_0;
@@ -104,6 +105,7 @@
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C20 0x20>;
 		#power-domain-cells = <0>;
+		power-domains = <&pd_lcd0>;
 	};
 
 	pd_cam: cam-power-domain@10023C00 {
@@ -554,6 +556,22 @@
 		status = "disabled";
 	};
 
+	i2c_8: i2c@138E0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-hdmiphy-i2c";
+		reg = <0x138E0000 0x100>;
+		interrupts = <0 93 0>;
+		clocks = <&clock CLK_I2C_HDMI>;
+		clock-names = "i2c";
+		status = "disabled";
+
+		hdmi_i2c_phy: hdmiphy@38 {
+			compatible = "exynos4210-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
 	spi_0: spi@13920000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
@@ -663,6 +681,33 @@
 		status = "disabled";
 	};
 
+	tmu: tmu@100C0000 {
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	hdmi: hdmi@12D00000 {
+		compatible = "samsung,exynos4210-hdmi";
+		reg = <0x12D00000 0x70000>;
+		interrupts = <0 92 0>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
+			"mout_hdmi";
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			<&clock CLK_MOUT_HDMI>;
+		phy = <&hdmi_i2c_phy>;
+		power-domains = <&pd_tv>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+	};
+
+	mixer: mixer@12C10000 {
+		compatible = "samsung,exynos4210-mixer";
+		interrupts = <0 91 0>;
+		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+		power-domains = <&pd_tv>;
+		status = "disabled";
+	};
+
 	ppmu_dmc0: ppmu_dmc0@106a0000 {
 		compatible = "samsung,exynos-ppmu";
 		reg = <0x106a0000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 3d6652a4b6cb..32c5fd8f6269 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -426,6 +426,25 @@
 		status = "okay";
 	};
 
+	tmu@100C0000 {
+		status = "okay";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 2 2>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 4 4>;
+			       };
+		       };
+		};
+	};
+
 	camera {
 		pinctrl-names = "default";
 		pinctrl-0 = <>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index b57e6b82ea20..d4f2b11319dd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -505,6 +505,63 @@
 			assigned-clock-rates = <0>, <160000000>;
 		};
 	};
+
+	hdmi_en: voltage-regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpe0 1 0>;
+		enable-active-high;
+	};
+
+	hdmi_ddc: i2c-ddc {
+		compatible = "i2c-gpio";
+		gpios = <&gpe4 2 0 &gpe4 3 0>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_ddc_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	mixer@12C10000 {
+		status = "okay";
+	};
+
+	hdmi@12D00000 {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd>;
+		hdmi-en-supply = <&hdmi_en>;
+		vdd-supply = <&ldo3_reg>;
+		vdd_osc-supply = <&ldo4_reg>;
+		vdd_pll-supply = <&ldo3_reg>;
+		ddc = <&hdmi_ddc>;
+		status = "okay";
+	};
+
+	i2c@138E0000 {
+		status = "okay";
+	};
+};
+
+&pinctrl_1 {
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <0>;
+	};
+};
+
+&pinctrl_0 {
+	i2c_ddc_bus: i2c-ddc-bus {
+		samsung,pins = "gpe4-2", "gpe4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 67c832c9dcf1..be89f83f70e7 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -21,6 +21,7 @@
 
 #include "exynos4.dtsi"
 #include "exynos4210-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 
 / {
 	compatible = "samsung,exynos4210", "samsung,exynos4";
@@ -35,10 +36,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@900 {
+		cpu0: cpu@900 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x900>;
+			cooling-min-level = <4>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@901 {
@@ -153,16 +157,38 @@
 		reg = <0x03860000 0x1000>;
 	};
 
-	tmu@100C0000 {
+	tmu: tmu@100C0000 {
 		compatible = "samsung,exynos4210-tmu";
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
 		clocks = <&clock CLK_TMU_APBIF>;
 		clock-names = "tmu_apbif";
+		samsung,tmu_gain = <15>;
+		samsung,tmu_reference_voltage = <7>;
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+			      cpu_alert0: cpu-alert-0 {
+				      temperature = <85000>; /* millicelsius */
+			      };
+			      cpu_alert1: cpu-alert-1 {
+				      temperature = <100000>; /* millicelsius */
+			      };
+			      cpu_alert2: cpu-alert-2 {
+				      temperature = <110000>; /* millicelsius */
+			      };
+			};
+		};
+	};
+
 	g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
@@ -203,6 +229,14 @@
 		};
 	};
 
+	mixer: mixer@12C10000 {
+		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
+			"sclk_mixer";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
+			<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
+	};
+
 	ppmu_lcd1: ppmu_lcd1@12240000 {
 		compatible = "samsung,exynos-ppmu";
 		reg = <0x12240000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index dd0a43ec56da..5be03288f1ee 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -26,10 +26,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@A00 {
+		cpu0: cpu@A00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			cooling-min-level = <13>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@A01 {
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index de80b5bba204..adb4f6a97a1d 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -249,6 +249,20 @@
 					regulator-always-on;
 				};
 
+				ldo8_reg: ldo@8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VDD10_HDMI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo10_reg: ldo@10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VDDQ_MIPIHSI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
 				ldo11_reg: LDO11 {
 					regulator-name = "VDD18_ABB1_1.8V";
 					regulator-min-microvolt = <1800000>;
@@ -411,6 +425,51 @@
 	ehci: ehci@12580000 {
 		status = "okay";
 	};
+
+	tmu@100C0000 {
+		vtmu-supply = <&ldo10_reg>;
+		status = "okay";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
+
+	mixer: mixer@12C10000 {
+		status = "okay";
+	};
+
+	hdmi@12D00000 {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd>;
+		vdd-supply = <&ldo8_reg>;
+		vdd_osc-supply = <&ldo10_reg>;
+		vdd_pll-supply = <&ldo8_reg>;
+		ddc = <&hdmi_ddc>;
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@13880000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+	};
+
+	i2c@138E0000 {
+		status = "okay";
+	};
 };
 
 &pinctrl_1 {
@@ -425,4 +484,9 @@
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..e3f7934d19d0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos4412 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <8>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <55>;
+samsung,tmu_min_efuse_value = <40>;
+samsung,tmu_max_efuse_value = <100>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <85>;
+samsung,tmu_default_temp_offset = <50>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 21f748083586..173ffa479ad3 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -927,6 +927,21 @@
 		pulldown-ohm = <100000>; /* 100K */
 		io-channels = <&adc 2>;  /* Battery temperature */
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
+		};
+	};
 };
 
 &pmu_system_controller {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 0f6ec93bb1d8..68ad43b391ae 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -26,10 +26,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@A00 {
+		cpu0: cpu@A00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA00>;
+			cooling-min-level = <13>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@A01 {
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index f5e0ae780d6c..6a6abe14fd9b 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -19,6 +19,7 @@
 
 #include "exynos4.dtsi"
 #include "exynos4x12-pinctrl.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 
 / {
 	aliases {
@@ -297,4 +298,15 @@
 		clock-names = "tmu_apbif";
 		status = "disabled";
 	};
+
+	hdmi: hdmi@12D00000 {
+		compatible = "samsung,exynos4212-hdmi";
+	};
+
+	mixer: mixer@12C10000 {
+		compatible = "samsung,exynos4212-mixer";
+		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 9bb1b0b738f5..adbde1adad95 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -20,7 +20,7 @@
 #include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
 #include "exynos5250-pinctrl.dtsi"
-
+#include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
@@ -58,11 +58,14 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1700000000>;
+			cooling-min-level = <15>;
+			cooling-max-level = <9>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -102,6 +105,12 @@
 		#power-domain-cells = <0>;
 	};
 
+	pd_disp1: disp1-power-domain@100440A0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440A0 0x20>;
+		#power-domain-cells = <0>;
+	};
+
 	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
@@ -235,12 +244,32 @@
 		status = "disabled";
 	};
 
-	tmu@10060000 {
+	tmu: tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
+
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 9 9>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 15 15>;
+			       };
+		       };
+		};
 	};
 
 	serial@12C00000 {
@@ -719,6 +748,7 @@
 	hdmi: hdmi {
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
+		power-domains = <&pd_disp1>;
 		interrupts = <0 95 0>;
 		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
 			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
@@ -731,9 +761,11 @@
 	mixer {
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
+		power-domains = <&pd_disp1>;
 		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			 <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "hdmi", "sclk_hdmi";
 	};
 
 	dp_phy: video-phy@10040720 {
@@ -743,6 +775,7 @@
 	};
 
 	dp: dp-controller@145B0000 {
+		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_DP>;
 		clock-names = "dp";
 		phys = <&dp_phy>;
@@ -750,6 +783,7 @@
 	};
 
 	fimd: fimd@14400000 {
+		power-domains = <&pd_disp1>;
 		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 		clock-names = "sclk_fimd", "fimd";
 	};
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
new file mode 100644
index 000000000000..5d31fc140823
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Device tree sources for default Exynos5420 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+	cpu-alert-0 {
+		temperature = <85000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-1 {
+		temperature = <103000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-2 {
+		temperature = <110000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-crit-0 {
+		temperature = <1200000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 9dc2e9773b30..c0e98cf3514f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -740,8 +740,9 @@
 		compatible = "samsung,exynos5420-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
+		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+			 <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "hdmi", "sclk_hdmi";
 		power-domains = <&disp_pd>;
 	};
 
@@ -782,6 +783,7 @@
 		interrupts = <0 65 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu1: tmu@10064000 {
@@ -790,6 +792,7 @@
 		interrupts = <0 183 0>;
 		clocks = <&clock CLK_TMU>;
 		clock-names = "tmu_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu2: tmu@10068000 {
@@ -798,6 +801,7 @@
 		interrupts = <0 184 0>;
 		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu3: tmu@1006c000 {
@@ -806,6 +810,7 @@
 		interrupts = <0 185 0>;
 		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_gpu: tmu@100a0000 {
@@ -814,6 +819,30 @@
 		interrupts = <0 215 0>;
 		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmu_cpu1>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmu_cpu2>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+		       thermal-sensors = <&tmu_cpu3>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
+		gpu_thermal: gpu-thermal {
+		       thermal-sensors = <&tmu_gpu>;
+		       #include "exynos5420-trip-points.dtsi"
+		};
 	};
 
         watchdog: watchdog@101D0000 {
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
new file mode 100644
index 000000000000..7b2fba0ae92b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device tree sources for Exynos5440 TMU sensor configuration
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/thermal/thermal_exynos.h>
+
+#thermal-sensor-cells = <0>;
+samsung,tmu_gain = <5>;
+samsung,tmu_reference_voltage = <16>;
+samsung,tmu_noise_cancel_mode = <4>;
+samsung,tmu_efuse_value = <0x5d2d>;
+samsung,tmu_min_efuse_value = <16>;
+samsung,tmu_max_efuse_value = <76>;
+samsung,tmu_first_point_trim = <25>;
+samsung,tmu_second_point_trim = <70>;
+samsung,tmu_default_temp_offset = <25>;
+samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
new file mode 100644
index 000000000000..48adfa8f4300
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device tree sources for default Exynos5440 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+	cpu-alert-0 {
+		temperature = <100000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "active";
+	};
+	cpu-crit-0 {
+		temperature = <1050000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 8f3373cd7b87..59d9416b3b03 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -219,6 +219,7 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 	tmuctrl_1: tmuctrl@16011C {
@@ -227,6 +228,7 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 	tmuctrl_2: tmuctrl@160120 {
@@ -235,6 +237,22 @@
 		interrupts = <0 58 0>;
 		clocks = <&clock CLK_B_125>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmuctrl_0>;
+			#include "exynos5440-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+		       thermal-sensors = <&tmuctrl_1>;
+		       #include "exynos5440-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+		       thermal-sensors = <&tmuctrl_2>;
+		       #include "exynos5440-trip-points.dtsi"
+		};
 	};
 
 	sata@210000 {
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f1cd2147421d..a626e6dd8022 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -35,6 +35,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -45,6 +46,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 29 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_audio: regulator@2 {
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index fda4932faefd..945887d3fdb3 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -52,6 +52,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 0 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_otg2_vbus: regulator@1 {
@@ -62,6 +63,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 2 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_aud3v: regulator@2 {
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 0ab748cf7749..f5b5a1d96cd7 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -133,6 +133,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 46eadb21b5ef..2294f5b0aa10 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -73,6 +73,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 127f3e7c10c4..346552b94d9f 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -106,6 +106,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &twl_gpio {
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index cc8bd0cd8cf8..72f7cdc091fb 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -42,4 +42,13 @@
 	vmmc-supply = <&lbep5clwmc_wlen>;
 	bus-width = <4>;
 	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */
+	};
 };
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 9326b282c94a..b899e341874a 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -64,4 +64,13 @@
 	vmmc-supply = <&lbep5clwmc_wlen>;
 	bus-width = <4>;
 	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+	};
 };
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 6644f516a42b..131448d86e67 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -195,6 +195,16 @@
 	cap-power-off-card;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */
+		ref-clock-frequency = <26000000>;
+	};
 };
 
 &uart1 {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 150513506c19..1228de5a05ed 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -450,6 +450,16 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		ref-clock-frequency = <38400000>;
+	};
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 3e1da43068f6..8c36f51f5780 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -487,6 +487,17 @@
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1281";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index cc66af419236..9bceeb7e1f03 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -65,4 +65,14 @@
 	bus-width = <4>;
 	cap-power-off-card;
 	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
+		ref-clock-frequency = <38400000>;
+	};
 };
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
index 19212ac6eef0..de8a3d456cf7 100644
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi
@@ -13,7 +13,7 @@
 
 core_thermal: core_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
 
 			/* sensor       ID */
 	thermal-sensors = <&bandgap     2>;
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
index 1b87aca88b77..bc3090f2e84b 100644
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -13,7 +13,7 @@
 
 gpu_thermal: gpu_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
 
 			/* sensor       ID */
 	thermal-sensors = <&bandgap     1>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index ddff674bd05e..4a485b63a141 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -1079,4 +1079,8 @@
 	};
 };
 
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
+};
+
 /include/ "omap54xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 58c27466f012..83b425fb3ac2 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -167,10 +167,18 @@
 		ti,index-starts-at-one;
 	};
 
+	dpll_core_byp_mux: dpll_core_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
 	dpll_core_ck: dpll_core_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
@@ -294,10 +302,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_iva_byp_mux: dpll_iva_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
 	dpll_iva_ck: dpll_iva_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
@@ -599,10 +615,19 @@
 	};
 };
 &cm_core_clocks {
+
+	dpll_per_byp_mux: dpll_per_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
 	dpll_per_ck: dpll_per_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
@@ -714,10 +739,18 @@
 		ti,index-starts-at-one;
 	};
 
+	dpll_usb_byp_mux: dpll_usb_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
 	dpll_usb_ck: dpll_usb_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 7de02f104004..24e488826d34 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1449,7 +1449,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 5cccbc98b267..82786027e814 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -264,7 +264,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
@@ -509,8 +509,8 @@
 
 					lcdck: lcdck {
 						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&smd>;
+						reg = <3>;
+						clocks = <&mck>;
 					};
 
 					smdck: smdck {
@@ -818,7 +818,7 @@
 						reg = <50>;
 					};
 
-					lcd_clk: lcd_clk {
+					lcdc_clk: lcdc_clk {
 						#clock-cells = <0>;
 						reg = <51>;
 					};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 252c3d1bda50..9d8760956752 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -713,6 +713,9 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 28>,
+			       <&pdma 29>;
+			dma-names = "tx", "rx";
 		};
 
 		uart1: serial1@ffc03000 {
@@ -722,6 +725,9 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 30>,
+			       <&pdma 31>;
+			dma-names = "tx", "rx";
 		};
 
 		rst: rstmgr@ffd05000 {