Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms,
  but also a few more things:

  New SoC support this release:
   - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
   - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core

  Cleanups of various platforms:
   - OMAP1 ams-delta does some GPIO cleanups
   - Davinci removes of at24 platform data
   - Samsung cleans up old wakeup, PM debug and secondary core boot code
   - Renesas moves around config options and PM code to drivers/soc for
     sharing with 64-bit and more consistency
   - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
     console setups
   - SoCFPGA adds explicit selection of ARM errata and removes some
     unused code

  This also contains a few patches that I had queued up as fixes for
  4.20 but didn't send in before the release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: omap2: avoid section mismatch warning
  ARM: tegra: avoid section mismatch warning
  ARM: ks8695: fix section mismatch warning
  ARM: pxa: avoid section mismatch warning
  ARM: mmp: fix pxa168_device_usb_phy use on aspenite
  ARM: mmp: fix timer_init calls
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: imx: fix dependencies on imx7ulp
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: davinci: da850-evm: remove unnecessary include
  ...

2 files changed, 54 insertions, 11 deletions

diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 0f580caa81e5..bf8702ee8f86 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -26,8 +26,9 @@
 
 #define UARTA_3390		REG_PHYS_ADDR(0x40a900)
 #define UARTA_7250		REG_PHYS_ADDR(0x40b400)
-#define UARTA_7260		REG_PHYS_ADDR(0x40c000)
-#define UARTA_7268		UARTA_7260
+#define UARTA_7255		REG_PHYS_ADDR(0x40c000)
+#define UARTA_7260		UARTA_7255
+#define UARTA_7268		UARTA_7255
 #define UARTA_7271		UARTA_7268
 #define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
 #define UARTA_7364		REG_PHYS_ADDR(0x40b000)
@@ -82,15 +83,16 @@ ARM_BE8(	rev	\rv, \rv )
 		/* Chip specific detection starts here */
 20:		checkuart(\rp, \rv, 0x33900000, 3390)
 21:		checkuart(\rp, \rv, 0x72500000, 7250)
-22:		checkuart(\rp, \rv, 0x72600000, 7260)
-23:		checkuart(\rp, \rv, 0x72680000, 7268)
-24:		checkuart(\rp, \rv, 0x72710000, 7271)
-25:		checkuart(\rp, \rv, 0x73640000, 7364)
-26:		checkuart(\rp, \rv, 0x73660000, 7366)
-27:		checkuart(\rp, \rv, 0x07437100, 74371)
-28:		checkuart(\rp, \rv, 0x74390000, 7439)
-29:		checkuart(\rp, \rv, 0x74450000, 7445)
-30:		checkuart(\rp, \rv, 0x72780000, 7278)
+22:		checkuart(\rp, \rv, 0x72550000, 7255)
+23:		checkuart(\rp, \rv, 0x72600000, 7260)
+24:		checkuart(\rp, \rv, 0x72680000, 7268)
+25:		checkuart(\rp, \rv, 0x72710000, 7271)
+26:		checkuart(\rp, \rv, 0x72780000, 7278)
+27:		checkuart(\rp, \rv, 0x73640000, 7364)
+28:		checkuart(\rp, \rv, 0x73660000, 7366)
+29:		checkuart(\rp, \rv, 0x07437100, 74371)
+30:		checkuart(\rp, \rv, 0x74390000, 7439)
+31:		checkuart(\rp, \rv, 0x74450000, 7445)
 
 		/* No valid UART found */
 90:		mov	\rp, #0
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
new file mode 100644
index 000000000000..1abb32f685fd
--- /dev/null
+++ b/arch/arm/include/debug/stm32.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics SA 2017 - All Rights Reserved
+ * Author:   Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
+ */
+
+#define STM32_UART_BASE			0x40011000	/* USART1 */
+
+#ifdef CONFIG_STM32F4_DEBUG_UART
+#define STM32_USART_SR_OFF		0x00
+#define STM32_USART_TDR_OFF		0x04
+#endif
+
+#ifdef CONFIG_STM32F7_DEBUG_UART
+#define STM32_USART_SR_OFF		0x1C
+#define STM32_USART_TDR_OFF		0x28
+#endif
+
+#define STM32_USART_TC			(1 << 6)	/* Tx complete       */
+#define STM32_USART_TXE			(1 << 7)	/* Tx data reg empty */
+
+.macro	addruart, rp, rv, tmp
+	ldr	\rp,      =STM32_UART_BASE	@ physical base
+	ldr	\rv,      =STM32_UART_BASE      @ virt base /* NoMMU */
+.endm
+
+.macro  senduart,rd,rx
+	strb    \rd, [\rx, #STM32_USART_TDR_OFF]
+.endm
+
+.macro  waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TXE			@ TXE = 1 = tx empty
+	beq	1001b
+.endm
+
+.macro  busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TC			@ TC = 1 = tx complete
+	beq	1001b
+.endm