mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support

Add support for the GL9767 chipset. GL9767 supports
SD3 mode likes UHS-I SDR50, SDR104.
Enable MSI interrupt for GL9767. Some platform do not
support PCI INTx and devices can not work without
interrupt.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

1 files changed, 160 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 633a8ee8f8c5..3ed207b89d1a 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -149,6 +149,32 @@
 #define PCI_GLI_9755_PM_CTRL     0xFC
 #define   PCI_GLI_9755_PM_STATE    GENMASK(1, 0)
 
+#define SDHCI_GLI_9767_GM_BURST_SIZE			0x510
+#define   SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET	  BIT(8)
+
+#define PCIE_GLI_9767_VHS	0x884
+#define   GLI_9767_VHS_REV	  GENMASK(19, 16)
+#define   GLI_9767_VHS_REV_R	  0x0
+#define   GLI_9767_VHS_REV_M	  0x1
+#define   GLI_9767_VHS_REV_W	  0x2
+
+#define PCIE_GLI_9767_PWR_MACRO_CTL					0x8D0
+#define   PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE			  GENMASK(3, 0)
+#define   PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE		  GENMASK(15, 12)
+#define   PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE	  0x7
+#define   PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL		  GENMASK(29, 28)
+#define   PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE		  0x3
+
+#define PCIE_GLI_9767_SCR				0x8E0
+#define   PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST		  BIT(6)
+#define   PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST		  BIT(7)
+#define   PCIE_GLI_9767_SCR_AXI_REQ			  BIT(9)
+#define   PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN	  BIT(10)
+#define   PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0	  BIT(16)
+#define   PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1	  BIT(17)
+#define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF		  BIT(21)
+#define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN	  BIT(30)
+
 #define GLI_MAX_TUNING_LOOP 40
 
 /* Genesys Logic chipset */
@@ -693,6 +719,89 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
 	gl9755_wt_off(pdev);
 }
 
+static inline void gl9767_vhs_read(struct pci_dev *pdev)
+{
+	u32 vhs_enable;
+	u32 vhs_value;
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value);
+	vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value);
+
+	if (vhs_enable == GLI_9767_VHS_REV_R)
+		return;
+
+	vhs_value &= ~GLI_9767_VHS_REV;
+	vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_R);
+
+	pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value);
+}
+
+static inline void gl9767_vhs_write(struct pci_dev *pdev)
+{
+	u32 vhs_enable;
+	u32 vhs_value;
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value);
+	vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value);
+
+	if (vhs_enable == GLI_9767_VHS_REV_W)
+		return;
+
+	vhs_value &= ~GLI_9767_VHS_REV;
+	vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_W);
+
+	pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value);
+}
+
+static void gli_set_9767(struct sdhci_host *host)
+{
+	u32 value;
+
+	value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE);
+	value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET;
+	sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE);
+}
+
+static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
+{
+	struct pci_dev *pdev = slot->chip->pdev;
+	u32 value;
+
+	gl9767_vhs_write(pdev);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, &value);
+	value &= ~(PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE |
+		   PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE |
+		   PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL);
+
+	value |= PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE |
+		 FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE,
+			    PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL,
+			    PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_SCR, &value);
+	value &= ~(PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 |
+		   PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 |
+		   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN);
+
+	value |= PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST |
+		 PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST |
+		 PCIE_GLI_9767_SCR_AXI_REQ |
+		 PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN |
+		 PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF;
+	pci_write_config_dword(pdev, PCIE_GLI_9767_SCR, value);
+
+	gl9767_vhs_read(pdev);
+}
+
+static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
+{
+	sdhci_reset(host, mask);
+	gli_set_9767(host);
+}
+
 static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_host *host = slot->host;
@@ -717,6 +826,19 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
 	return 0;
 }
 
+static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
+{
+	struct sdhci_host *host = slot->host;
+
+	gli_set_9767(host);
+	gl9767_hw_setting(slot);
+	gli_pcie_enable_msi(slot);
+	slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+	sdhci_enable_v4_mode(host);
+
+	return 0;
+}
+
 static void sdhci_gli_voltage_switch(struct sdhci_host *host)
 {
 	/*
@@ -740,6 +862,25 @@ static void sdhci_gli_voltage_switch(struct sdhci_host *host)
 	usleep_range(100000, 110000);
 }
 
+static void sdhci_gl9767_voltage_switch(struct sdhci_host *host)
+{
+	/*
+	 * According to Section 3.6.1 signal voltage switch procedure in
+	 * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
+	 * follows:
+	 * (6) Set 1.8V Signal Enable in the Host Control 2 register.
+	 * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
+	 *     period.
+	 * (8) If 1.8V Signal Enable is cleared by Host Controller, go to
+	 *     step (12).
+	 *
+	 * Wait 5ms after set 1.8V signal enable in Host Control 2 register
+	 * to ensure 1.8V signal enable bit is set by GL9767.
+	 *
+	 */
+	usleep_range(5000, 5500);
+}
+
 static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
 {
 	sdhci_reset(host, mask);
@@ -1150,3 +1291,22 @@ const struct sdhci_pci_fixes sdhci_gl9763e = {
 #endif
 	.add_host       = gl9763e_add_host,
 };
+
+static const struct sdhci_ops sdhci_gl9767_ops = {
+	.set_clock		 = sdhci_set_clock,
+	.enable_dma		 = sdhci_pci_enable_dma,
+	.set_bus_width		 = sdhci_set_bus_width,
+	.reset			 = sdhci_gl9767_reset,
+	.set_uhs_signaling	 = sdhci_set_uhs_signaling,
+	.voltage_switch		 = sdhci_gl9767_voltage_switch,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9767 = {
+	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
+	.probe_slot	= gli_probe_slot_gl9767,
+	.ops		= &sdhci_gl9767_ops,
+#ifdef CONFIG_PM_SLEEP
+	.resume		= sdhci_pci_gli_resume,
+#endif
+};