diff options
| author | Arınç ÜNAL <arinc.unal@arinc9.com> | 2024-03-01 12:43:05 +0200 |
|---|---|---|
| committer | Paolo Abeni <pabeni@redhat.com> | 2024-03-05 12:23:43 +0100 |
| commit | b04097c7a7450f7ae172b4a049e8876a85e859be (patch) | |
| tree | 3455fa6332f7224712e47546b99d295332b2e231 /drivers/net/dsa/mt7530.c | |
| parent | 6324230b3b675397a5bcabf9bf7b0bd0a7f2ae0a (diff) | |
net: dsa: mt7530: simplify link operations
The "MT7621 Giga Switch Programming Guide v0.3", "MT7531 Reference Manual
for Development Board v1.0", and "MT7988A Wi-Fi 7 Generation Router
Platform: Datasheet (Open Version) v0.1" documents show that these bits are
enabled at reset:
PMCR_IFG_XMIT(1) (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_MAC_MODE (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_TX_EN
PMCR_RX_EN
PMCR_BACKOFF_EN (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_BACKPR_EN (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_TX_FC_EN
PMCR_RX_FC_EN
These bits also don't exist on the MT7530_PMCR_P(6) register of the switch
on the MT7988 SoC:
PMCR_IFG_XMIT()
PMCR_MAC_MODE
PMCR_BACKOFF_EN
PMCR_BACKPR_EN
Remove the setting of the bits not part of PMCR_LINK_SETTINGS_MASK on
phylink_mac_config as they're already set.
The bit for setting the port on force mode is already done on
mt7530_setup() and mt7531_setup_common(). So get rid of
PMCR_FORCE_MODE_ID() which helped determine which bit to use for the switch
model.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diffstat (limited to 'drivers/net/dsa/mt7530.c')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 12 |
1 files changed, 1 insertions, 11 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 91d927bb49f7..1ae11b180d54 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2667,23 +2667,13 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; if ((port == 5 || port == 6) && priv->info->mac_port_config) priv->info->mac_port_config(ds, port, mode, state->interface); - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; - mcr_new &= ~PMCR_LINK_SETTINGS_MASK; - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); - /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) - mcr_new |= PMCR_EXT_PHY; - - if (mcr_new != mcr_cur) - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); + mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY); } static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, |