diff options
| author | Oleksandr Suvorov <oleksandr.suvorov@toradex.com> | 2020-02-29 18:18:40 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2020-03-02 15:19:54 +0000 |
| commit | ea70fb5b3e8b795730ab5716592bb573648434bb (patch) | |
| tree | f99265a73f4031f03797bc3c6e03bd6ed7e6c85f /drivers/spi/spidev.c | |
| parent | 51bddd4501bc414b8b1e8f4d096b4a5304068169 (diff) | |
spi: spidev: fix a debug message value
The debug message in spidev_message() can show wrong xfer speed.
It happens if the initial (came from DT) and set with ioctl call spidev
speeds are different (spidev->speed_hz != spi->max_speed_hz) and one
sends a message with ioctl call and the field of speed is uninitialized
(u_tmp->speed_hz == 0).
In this case the kernel shows the spi->max_speed_hz value instead of
correct spidev->speed_hz.
...
set the max speed with an ioctl call:
[ 1227.702714] spidev spi0.0: setup mode 0, 32 bits/w, 20000000 Hz max --> 0
(real speed sets to 20000000Hz)
send a message with an ioctl call:
[ 1227.731801] spidev spi0.0: xfer len 4096 tx 32bits 0 usec 10000000Hz
(debug message shows 10000000Hz that is the original max speed of this
spidev came from DT)
...
Fix the data source for the debug message.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20200229161841.89144-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spidev.c')
| -rw-r--r-- | drivers/spi/spidev.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 2ab6e782f14c..c97e853dbf5c 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -275,14 +275,14 @@ static int spidev_message(struct spidev_data *spidev, #ifdef VERBOSE dev_dbg(&spidev->spi->dev, " xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n", - u_tmp->len, - u_tmp->rx_buf ? "rx " : "", - u_tmp->tx_buf ? "tx " : "", - u_tmp->cs_change ? "cs " : "", - u_tmp->bits_per_word ? : spidev->spi->bits_per_word, - u_tmp->delay_usecs, - u_tmp->word_delay_usecs, - u_tmp->speed_hz ? : spidev->spi->max_speed_hz); + k_tmp->len, + k_tmp->rx_buf ? "rx " : "", + k_tmp->tx_buf ? "tx " : "", + k_tmp->cs_change ? "cs " : "", + k_tmp->bits_per_word ? : spidev->spi->bits_per_word, + k_tmp->delay.value, + k_tmp->word_delay.value, + k_tmp->speed_hz ? : spidev->spi->max_speed_hz); #endif spi_message_add_tail(k_tmp, &msg); } |