diff options
Diffstat (limited to 'arch/arm64/boot/dts/exynos/google/gs101-oriole.dts')
| -rw-r--r-- | arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 267 |
1 files changed, 8 insertions, 259 deletions
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts index e58881c61d53..8df42bedbc03 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts @@ -8,273 +8,22 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/usb/pd.h> -#include "gs101-pinctrl.h" -#include "gs101.dtsi" +#include "gs101-pixel-common.dtsi" / { model = "Oriole"; compatible = "google,gs101-oriole", "google,gs101"; - - aliases { - serial0 = &serial_0; - }; - - chosen { - /* Bootloader expects bootargs specified otherwise it crashes */ - bootargs = ""; - stdout-path = &serial_0; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>; - pinctrl-names = "default"; - - button-vol-down { - label = "KEY_VOLUMEDOWN"; - linux,code = <KEY_VOLUMEDOWN>; - gpios = <&gpa7 3 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - - button-vol-up { - label = "KEY_VOLUMEUP"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&gpa8 1 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - - button-power { - label = "KEY_POWER"; - linux,code = <KEY_POWER>; - gpios = <&gpa10 1 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - }; - - /* TODO: Remove this once PMIC is implemented */ - reg_placeholder: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "placeholder_reg"; - }; - - /* TODO: Remove this once S2MPG11 slave PMIC is implemented */ - ufs_0_fixed_vcc_reg: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "ufs-vcc"; - gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>; - regulator-boot-on; - enable-active-high; - }; -}; - -&ext_24_5m { - clock-frequency = <24576000>; -}; - -&ext_200m { - clock-frequency = <200000000>; -}; - -&hsi2c_8 { - status = "okay"; - - eeprom: eeprom@50 { - compatible = "atmel,24c08"; - reg = <0x50>; - }; -}; - -&hsi2c_12 { - status = "okay"; - /* TODO: add the devices once drivers exist */ - - usb-typec@25 { - compatible = "maxim,max77759-tcpci", "maxim,max33359"; - reg = <0x25>; - interrupts-extended = <&gpa8 2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&typec_int>; - pinctrl-names = "default"; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - power-role = "dual"; - self-powered; - try-power-role = "sink"; - op-sink-microwatt = <2600000>; - slow-charger-loop; - /* - * max77759 operating in reverse boost mode (0xA) can - * source up to 1.5A while extboost can only do ~1A. - * Since extboost is the primary path, advertise 900mA. - */ - source-pdos = <PDO_FIXED(5000, 900, - (PDO_FIXED_SUSPEND - | PDO_FIXED_USB_COMM - | PDO_FIXED_DATA_SWAP - | PDO_FIXED_DUAL_ROLE))>; - sink-pdos = <PDO_FIXED(5000, 3000, - (PDO_FIXED_DATA_SWAP - | PDO_FIXED_USB_COMM - | PDO_FIXED_HIGHER_CAP - | PDO_FIXED_DUAL_ROLE)) - PDO_FIXED(9000, 2200, 0) - PDO_PPS_APDO(5000, 11000, 3000)>; - sink-vdos = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0, - IDH_PTYPE_DFP_HOST, 2, 0x18d1) - VDO_CERT(0x0) - VDO_PRODUCT(0x4ee1, 0x0) - VDO_UFP(UFP_VDO_VER1_2, - (DEV_USB2_CAPABLE - | DEV_USB3_CAPABLE), - UFP_RECEPTACLE, 0, - AMA_VCONN_NOT_REQ, 0, - UFP_ALTMODE_NOT_SUPP, - UFP_USB32_GEN1) - /* padding */ 0 - VDO_DFP(DFP_VDO_VER1_1, - (HOST_USB2_CAPABLE - | HOST_USB3_CAPABLE), - DFP_RECEPTACLE, 0)>; - sink-vdos-v1 = <VDO_IDH(1, 1, IDH_PTYPE_PERIPH, 0, - 0, 0, 0x18d1) - VDO_CERT(0x0) - VDO_PRODUCT(0x4ee1, 0x0)>; - /* - * Until bootloader is updated to set those two when - * console is enabled, we disable PD here. - */ - pd-disable; - typec-power-opmode = "default"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usbc0_orien_sw: endpoint { - remote-endpoint = <&usbdrd31_phy_orien_switch>; - }; - }; - - port@1 { - reg = <1>; - - usbc0_role_sw: endpoint { - remote-endpoint = <&usbdrd31_dwc3_role_switch>; - }; - }; - }; - }; - }; -}; - -&pinctrl_far_alive { - key_voldown: key-voldown-pins { - samsung,pins = "gpa7-3"; - samsung,pin-function = <GS101_PIN_FUNC_EINT>; - samsung,pin-pud = <GS101_PIN_PULL_NONE>; - samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; - }; - - key_volup: key-volup-pins { - samsung,pins = "gpa8-1"; - samsung,pin-function = <GS101_PIN_FUNC_EINT>; - samsung,pin-pud = <GS101_PIN_PULL_NONE>; - samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; - }; - - typec_int: typec-int-pins { - samsung,pins = "gpa8-2"; - samsung,pin-function = <GS101_PIN_FUNC_EINT>; - samsung,pin-pud = <GS101_PIN_PULL_UP>; - samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; - }; -}; - -&pinctrl_gpio_alive { - key_power: key-power-pins { - samsung,pins = "gpa10-1"; - samsung,pin-function = <GS101_PIN_FUNC_EINT>; - samsung,pin-pud = <GS101_PIN_PULL_NONE>; - samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; - }; -}; - -&serial_0 { - status = "okay"; -}; - -&ufs_0 { - status = "okay"; - vcc-supply = <&ufs_0_fixed_vcc_reg>; -}; - -&ufs_0_phy { - status = "okay"; -}; - -&usbdrd31 { - vdd10-supply = <®_placeholder>; - vdd33-supply = <®_placeholder>; - status = "okay"; -}; - -&usbdrd31_dwc3 { - dr_mode = "otg"; - usb-role-switch; - role-switch-default-mode = "peripheral"; - maximum-speed = "super-speed-plus"; - status = "okay"; - - port { - usbdrd31_dwc3_role_switch: endpoint { - remote-endpoint = <&usbc0_role_sw>; - }; - }; -}; - -&usbdrd31_phy { - orientation-switch; - /* TODO: Update these once PMIC is implemented */ - pll-supply = <®_placeholder>; - dvdd-usb20-supply = <®_placeholder>; - vddh-usb20-supply = <®_placeholder>; - vdd33-usb20-supply = <®_placeholder>; - vdda-usbdp-supply = <®_placeholder>; - vddh-usbdp-supply = <®_placeholder>; - status = "okay"; - - port { - usbdrd31_phy_orien_switch: endpoint { - remote-endpoint = <&usbc0_orien_sw>; - }; - }; -}; - -&usi_uart { - samsung,clkreq-on; /* needed for UART mode */ - status = "okay"; -}; - -&usi8 { - samsung,mode = <USI_V2_I2C>; - status = "okay"; }; -&usi12 { - samsung,mode = <USI_V2_I2C>; +&cont_splash_mem { + reg = <0x0 0xfac00000 (1080 * 2400 * 4)>; status = "okay"; }; -&watchdog_cl0 { - timeout-sec = <30>; +&framebuffer0 { + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; status = "okay"; }; |