diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 58 |
1 files changed, 32 insertions, 26 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 995b30a7aae0..587e89d7fc5e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -60,16 +60,6 @@ vin-supply = <&vcc5v0_sys>; }; - vcc5v0_host: regulator-vcc5v0-host { - compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_sys>; - }; - vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -183,7 +173,6 @@ snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; rx_delay = <0x23>; - status = "okay"; }; &gpu { @@ -389,6 +378,14 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; +}; + +&i2c6 { + clock-frequency = <400000>; +}; + &i2c7 { status = "okay"; clock-frequency = <400000>; @@ -439,7 +436,6 @@ pinctrl-1 = <&i2s0_2ch_bus_bclk_off>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - status = "okay"; }; /* @@ -521,10 +517,10 @@ }; }; - usb2 { - vcc5v0_host_en: vcc5v0-host-en { + usb { + cy3304_reset: cy3304-reset { rockchip,pins = - <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; }; }; @@ -589,11 +585,6 @@ u2phy1_otg: otg-port { status = "okay"; }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; }; &usbdrd3_1 { @@ -603,12 +594,27 @@ &usbdrd_dwc3_1 { status = "okay"; dr_mode = "host"; -}; + pinctrl-names = "default"; + pinctrl-0 = <&cy3304_reset>; + #address-cells = <1>; + #size-cells = <0>; + + hub_2_0: hub@1 { + compatible = "usb4b4,6502", "usb4b4,6506"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc1v2_phy>; + vdd2-supply = <&vcc3v3_sys>; -&usb_host1_ehci { - status = "okay"; -}; + }; -&usb_host1_ohci { - status = "okay"; + hub_3_0: hub@2 { + compatible = "usb4b4,6500", "usb4b4,6504"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc1v2_phy>; + vdd2-supply = <&vcc3v3_sys>; + }; }; |