diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts | 64 |
1 files changed, 63 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts index 782ca000a644..0902d694cef4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts @@ -10,6 +10,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3576.dtsi" / { @@ -57,6 +58,17 @@ }; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds: leds { compatible = "gpio-leds"; @@ -116,7 +128,7 @@ vin-supply = <&vcc_3v3_s0>; }; - vcc3v3_pcie0: regulator-vcc3v3-pcie0 { + vcc3v3_pcie1: regulator-vcc3v3-pcie1 { compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie1"; regulator-min-microvolt = <3300000>; @@ -270,6 +282,26 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -659,6 +691,17 @@ }; }; +&pcie1 { + reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie1>; + + /* + * Disable usb_drd1_dwc3 if enabling pcie1 and set Dial_Switch_1 + * to low state according to the schematic of page 17. + */ + status = "disabled"; +}; + &pinctrl { usb { usb_host_pwren: usb-host-pwren { @@ -715,6 +758,10 @@ status = "okay"; }; +&ufshc { + status = "okay"; +}; + &usbdp_phy { rockchip,dp-lane-mux = <2 3>; status = "okay"; @@ -729,3 +776,18 @@ dr_mode = "host"; status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; |