diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 81 |
1 files changed, 70 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi index cb350727d116..3d8b6f0c5541 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi @@ -52,6 +52,17 @@ }; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>; @@ -163,8 +174,6 @@ gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&typec5v_pwren>; - regulator-always-on; - regulator-boot-on; regulator-name = "vbus5v0_typec"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -177,8 +186,6 @@ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb5v_pwren>; - regulator-always-on; - regulator-boot-on; regulator-name = "vbus5v0_usb"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -360,7 +367,35 @@ }; }; -&hdptxphy_hdmi0 { +&hdmi0_sound { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdmi1_sound { + status = "okay"; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&hdptxphy1 { status = "okay"; }; @@ -426,24 +461,30 @@ }; &i2c6 { - clock-frequency = <200000>; status = "okay"; - fusb302: typec-portc@22 { + usbc0: usb-typec@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&usbc0_int>; pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; vbus-supply = <&vbus5v0_typec>; + status = "okay"; connector { compatible = "usb-c-connector"; data-role = "dual"; label = "USB-C"; - power-role = "source"; + op-sink-microwatt = <1000000>; + /* fusb302 supports PD Rev 2.0 Ver 1.2 */ + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>; + power-role = "dual"; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; + try-power-role = "source"; + typec-power-opmode = "1.5A"; ports { #address-cells = <1>; @@ -531,6 +572,14 @@ }; }; +&i2s5_8ch { + status = "okay"; +}; + +&i2s6_8ch { + status = "okay"; +}; + &pcie2x1l0 { reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc_3v3_pcie20>; @@ -565,6 +614,10 @@ status = "okay"; }; +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + &pinctrl { gpio-leds { sys_led_pin: sys-led-pin { @@ -1084,9 +1137,8 @@ }; &usb_host0_xhci { - dr_mode = "host"; - status = "okay"; usb-role-switch; + status = "okay"; port { usb_host0_xhci_drd_sw: endpoint { @@ -1122,3 +1174,10 @@ remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; |