diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 19 |
1 files changed, 12 insertions, 7 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index bc8e1ce11047..f63c101b7d61 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -171,6 +171,7 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; + bootph-all; }; }; @@ -275,6 +276,7 @@ AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ >; + bootph-all; }; main_spi0_pins_default: main-spi0-default-pins { @@ -291,6 +293,7 @@ AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { @@ -349,10 +352,10 @@ }; &main_i2c1 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; + status = "okay"; eeprom@51 { compatible = "atmel,24c02"; @@ -382,25 +385,25 @@ }; &main_mcan0 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mcan0_pins_default>; phys = <&can_tc1>; + status = "okay"; }; &main_mcan1 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mcan1_pins_default>; phys = <&can_tc2>; + status = "okay"; }; &main_spi0 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_spi0_pins_default>; cs-gpios = <0>, <&main_gpio1 43 GPIO_ACTIVE_LOW>; ti,pindir-d0-out-d1-in; + status = "okay"; tpm@1 { compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; @@ -410,25 +413,27 @@ }; &main_uart0 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; + status = "okay"; }; &main_uart1 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; uart-has-rtscts; + status = "okay"; }; &sdhci1 { - status = "okay"; vmmc-supply = <&vcc_3v3_mmc>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; disable-wp; no-1-8-v; + bootph-all; + status = "okay"; }; &serdes0 { |