diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am69-sk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am69-sk.dts | 194 |
1 files changed, 185 insertions, 9 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 50de2a448a3a..f28375629739 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -35,8 +35,8 @@ device_type = "memory"; bootph-all; /* 32G RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x07 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000007 0x80000000>; }; reserved_memory: reserved-memory { @@ -484,6 +484,12 @@ >; }; + main_usbss0_pins_default: main-usbss0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */ + >; + }; + }; &wkup_pmx0 { @@ -517,18 +523,18 @@ wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ - J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ - J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_UART0_CTSn */ + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_UART0_RTSn */ + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ >; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ - J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ >; }; @@ -755,6 +761,7 @@ regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; + bootph-all; }; bucka3: buck3 { @@ -763,6 +770,7 @@ regulator-max-microvolt = <850000>; regulator-boot-on; regulator-always-on; + bootph-all; }; bucka4: buck4 { @@ -771,6 +779,7 @@ regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + bootph-all; }; bucka5: buck5 { @@ -779,6 +788,7 @@ regulator-max-microvolt = <850000>; regulator-boot-on; regulator-always-on; + bootph-all; }; ldoa1: ldo1 { @@ -787,6 +797,7 @@ regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + bootph-all; }; ldoa2: ldo2 { @@ -795,6 +806,7 @@ regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; + bootph-all; }; ldoa3: ldo3 { @@ -803,6 +815,7 @@ regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; + bootph-all; }; ldoa4: ldo4 { @@ -811,9 +824,31 @@ regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + bootph-all; }; }; }; + + tps62873a: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + bootph-pre-ram; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + tps62873b: regulator@43 { + compatible = "ti,tps62873"; + reg = <0x43>; + regulator-name = "VDD_CORE_0V8"; + regulator-min-microvolt = <760000>; + regulator-max-microvolt = <840000>; + regulator-boot-on; + regulator-always-on; + }; }; &wkup_gpio0 { @@ -905,7 +940,6 @@ status = "okay"; non-removable; ti,driver-strength-ohm = <50>; - disable-wp; }; &main_sdhci1 { @@ -958,6 +992,59 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + +&main_timer6 { + status = "reserved"; +}; + +&main_timer7 { + status = "reserved"; +}; + +&main_timer8 { + status = "reserved"; +}; + +&main_timer9 { + status = "reserved"; +}; + +&main_r5fss2 { + ti,cluster-mode = <0>; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, @@ -1203,3 +1290,92 @@ }; }; }; + +&serdes_ln_ctrl { + idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>, + <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>, + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>, + <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <3>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, <&serdes_wiz0 3>; + }; + + serdes0_usb_link: phy@3 { + reg = <3>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 4>; + }; +}; + +&serdes_wiz1 { + status = "okay"; +}; + +&serdes1 { + status = "okay"; + + serdes1_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>, <&serdes_wiz1 3>, <&serdes_wiz1 4>; + }; +}; + +&pcie0_rc { + status = "okay"; + reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; +}; + +&pcie1_rc { + status = "okay"; + reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie3_rc { + status = "okay"; + reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&usb_serdes_mux { + idle-states = <0>; /* USB0 to SERDES0 */ +}; + +&usbss0 { + status = "okay"; + pinctrl-0 = <&main_usbss0_pins_default>; + pinctrl-names = "default"; + ti,vbus-divider; +}; + +&usb0 { + status = "okay"; + dr_mode = "otg"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; |