diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 32 |
1 files changed, 28 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 7e6a584ac6f0..291ab9bb414d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -12,9 +12,10 @@ / { memory@80000000 { device_type = "memory"; + bootph-all; /* 4G RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x00 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; }; reserved_memory: reserved-memory { @@ -83,13 +84,13 @@ }; }; - mux0: mux-controller { + mux0: mux-controller-0 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>; }; - mux1: mux-controller { + mux1: mux-controller-1 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>; @@ -120,6 +121,7 @@ J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ >; + bootph-all; }; mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { @@ -136,6 +138,7 @@ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ >; + bootph-all; }; }; @@ -145,6 +148,7 @@ J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */ J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */ >; + bootph-all; }; }; @@ -185,6 +189,7 @@ flash@0,0 { compatible = "cypress,hyperflash", "cfi-flash"; reg = <0x00 0x00 0x4000000>; + bootph-all; partitions { compatible = "fixed-partitions"; @@ -261,6 +266,23 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, @@ -329,6 +351,7 @@ regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + bootph-all; }; bucka2: buck2 { @@ -502,6 +525,7 @@ partition@3fc0000 { label = "ospi.phypattern"; reg = <0x3fc0000 0x40000>; + bootph-all; }; }; }; |