diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 24 |
1 files changed, 23 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 8230d53cd696..45311438315f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -193,6 +193,7 @@ J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { @@ -234,6 +235,7 @@ J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */ >; + bootph-all; }; vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { @@ -247,6 +249,7 @@ J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; + bootph-all; }; main_usbss1_pins_default: main-usbss1-default-pins { @@ -342,6 +345,7 @@ J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ >; + bootph-all; }; mcu_uart0_pins_default: mcu-uart0-default-pins { @@ -351,6 +355,7 @@ J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ >; + bootph-all; }; sw11_button_pins_default: sw11-button-default-pins { @@ -370,6 +375,7 @@ J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ >; + bootph-all; }; mcu_cpsw_pins_default: mcu-cpsw-default-pins { @@ -435,12 +441,14 @@ status = "reserved"; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; }; &mcu_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_uart0_pins_default>; + bootph-all; }; &main_uart0 { @@ -449,6 +457,7 @@ pinctrl-0 = <&main_uart0_pins_default>; /* Shared with ATF on this platform */ power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + bootph-all; }; &main_uart1 { @@ -487,6 +496,7 @@ /* eMMC */ status = "okay"; non-removable; + bootph-all; ti,driver-strength-ohm = <50>; disable-wp; }; @@ -498,12 +508,14 @@ vqmmc-supply = <&vdd_sd_dv_alt>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; + bootph-all; ti,driver-strength-ohm = <50>; disable-wp; }; &usb_serdes_mux { idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */ + bootph-all; }; &serdes_ln_ctrl { @@ -513,6 +525,7 @@ <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; + bootph-all; }; &serdes_wiz3 { @@ -527,12 +540,14 @@ #phy-cells = <0>; cdns,phy-type = <PHY_TYPE_USB3>; resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; + bootph-all; }; }; &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; + bootph-all; ti,vbus-divider; }; @@ -541,6 +556,7 @@ maximum-speed = "super-speed"; phys = <&serdes3_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &usbss1 { @@ -557,6 +573,7 @@ &ospi1 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + status = "okay"; flash@0 { compatible = "jedec,spi-nor"; @@ -613,6 +630,7 @@ partition@3fe0000 { label = "qspi.phypattern"; reg = <0x3fe0000 0x20000>; + bootph-all; }; }; }; @@ -787,7 +805,11 @@ }; &dss_ports { - port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; dpi0_out: endpoint { remote-endpoint = <&dp0_in>; }; |