diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1200.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/db1200.c | 44 |
1 files changed, 11 insertions, 33 deletions
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index fb11c578e178..67f067706af2 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -1,21 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * DBAu1200/PBAu1200 board platform device registration * * Copyright (C) 2008-2011 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/clk.h> @@ -23,7 +10,6 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/init.h> -#include <linux/module.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/leds.h> @@ -340,6 +326,7 @@ static struct platform_device db1200_ide_dev = { /**********************************************************************/ +#ifdef CONFIG_MMC_AU1X /* SD carddetects: they're supposed to be edge-triggered, but ack * doesn't seem to work (CPLD Rev 2). Instead, the screaming one * is disabled and its counterpart enabled. The 200ms timeout is @@ -353,14 +340,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr) static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr) { - void (*mmc_cd)(struct mmc_host *, unsigned long); - - /* link against CONFIG_MMC=m */ - mmc_cd = symbol_get(mmc_detect_change); - if (mmc_cd) { - mmc_cd(ptr, msecs_to_jiffies(200)); - symbol_put(mmc_detect_change); - } + mmc_detect_change(ptr, msecs_to_jiffies(200)); msleep(100); /* debounce */ if (irq == DB1200_SD0_INSERT_INT) @@ -444,14 +424,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr) { - void (*mmc_cd)(struct mmc_host *, unsigned long); - - /* link against CONFIG_MMC=m */ - mmc_cd = symbol_get(mmc_detect_change); - if (mmc_cd) { - mmc_cd(ptr, msecs_to_jiffies(200)); - symbol_put(mmc_detect_change); - } + mmc_detect_change(ptr, msecs_to_jiffies(200)); msleep(100); /* debounce */ if (irq == PB1200_SD1_INSERT_INT) @@ -612,6 +585,7 @@ static struct platform_device pb1200_mmc1_dev = { .num_resources = ARRAY_SIZE(au1200_mmc1_res), .resource = au1200_mmc1_res, }; +#endif /* CONFIG_MMC_AU1X */ /**********************************************************************/ @@ -779,7 +753,9 @@ static struct platform_device db1200_audiodma_dev = { static struct platform_device *db1200_devs[] __initdata = { NULL, /* PSC0, selected by S6.8 */ &db1200_ide_dev, +#ifdef CONFIG_MMC_AU1X &db1200_mmc0_dev, +#endif &au1200_lcd_dev, &db1200_eth_dev, &db1200_nand_dev, @@ -790,7 +766,9 @@ static struct platform_device *db1200_devs[] __initdata = { }; static struct platform_device *pb1200_devs[] __initdata = { +#ifdef CONFIG_MMC_AU1X &pb1200_mmc1_dev, +#endif }; /* Some peripheral base addresses differ on the PB1200 */ @@ -848,7 +826,7 @@ int __init db1200_dev_setup(void) if (!IS_ERR(c)) { pfc = clk_round_rate(c, 50000000); if ((pfc < 1) || (abs(50000000 - pfc) > 2500000)) - pr_warn("DB1200: cant get I2C close to 50MHz\n"); + pr_warn("DB1200: can't get I2C close to 50MHz\n"); else clk_set_rate(c, pfc); clk_prepare_enable(c); @@ -869,7 +847,7 @@ int __init db1200_dev_setup(void) i2c_register_board_info(0, db1200_i2c_devs, ARRAY_SIZE(db1200_i2c_devs)); spi_register_board_info(db1200_spi_devs, - ARRAY_SIZE(db1200_i2c_devs)); + ARRAY_SIZE(db1200_spi_devs)); /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) |