summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos4.dtsi
AgeCommit message (Collapse)Author
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-05-30ARM: dts: exynos: Fix some typos in commentsArtur Weber
Change 'specfic' to 'specific', 'optiosn' to 'options' and remove duplicated 'are listed' in DTSI heading comments. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20230519190625.7844-2-aweber.kernel@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-05-08ARM: dts: exynos: drop simple-bus from FIMC in Exynos4Krzysztof Kozlowski
The FIMC camera node wrapper is not a bus, so using simple-bus fallback compatible just to instantiate its children nodes was never correct. Dropping simple-bus node fixes warnings: exynos4210-smdkv310.dtb: camera: $nodename:0: 'camera' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' The change is not backwards compatible and expects the FIMC driver to populate its children. Link: https://lore.kernel.org/r/20230207193254.550236-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-03-06ARM: dts: exynos: move MIPI phy to PMU node in Exynos4Krzysztof Kozlowski
The MIPI phy is actually part of the Power Management Unit system controller. It does not have its own address space, thus keeping the node under soc causes warnings: xynos4412-i9305.dtb: soc: video-phy: {'compatible': ['samsung,s5pv210-mipi-video-phy'], '#phy-cells': [[1]], 'syscon': [[11]], 'phandle': [[13]]} should not be valid under {'type': 'object'} Link: https://lore.kernel.org/r/20230207192851.549242-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-26ARM: dts: exynos: use lowercase hex addressesKrzysztof Kozlowski
By convention the hex addresses should be lowercase. Link: https://lore.kernel.org/r/20230125094513.155063-7-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-26ARM: dts: exynos: use generic node names for phyKrzysztof Kozlowski
Align HDMI and USB phy node names with bindings expectation. Link: https://lore.kernel.org/r/20230125094513.155063-6-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-26ARM: dts: exynos: correct HDMI phy compatible in Exynos4Krzysztof Kozlowski
The HDMI phy compatible was missing vendor prefix. Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230125094513.155063-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23ARM: dts: exynos: align HSOTG/USB node namesKrzysztof Kozlowski
The DT schema expect HSOTG node names to be named "usb": exynos4210-smdkv310.dtb: hsotg@12480000: $nodename:0: 'hsotg@12480000' does not match '^usb(@.*)?' Link: https://lore.kernel.org/r/20230120155404.323386-9-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-06-27ARM: dts: exynos: align SDHCI node name with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects "mmc". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220626120342.38851-2-krzysztof.kozlowski@linaro.org
2022-05-04ARM: dts: exynos: drop useless 'dma-channels/requests' propertiesKrzysztof Kozlowski
The pl330 DMA controller provides number of DMA channels and requests through its registers, so duplicating this information (with a chance of mistakes) in DTS is pointless. Additionally the DTS used always wrong property names which causes DT schema check failures - the bindings documented 'dma-channels' and 'dma-requests' properties without leading hash sign. Reported-by: Rob Herring <robh@kernel.org> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220430121902.59895-8-krzysztof.kozlowski@linaro.org
2022-04-04ARM: dts: exynos: align EHCI/OHCI nodes with dtschema on Exynos4Krzysztof Kozlowski
The node names should be generic and USB DT schema expects "usb" names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220314181948.246434-1-krzysztof.kozlowski@canonical.com
2022-01-31ARM: dts: exynos: update dma node name with dtschemaAlim Akhtar
Currently dma node name does not matches the pl330 dtschema and causes dtbs_check to report below warning: 'pdma@12680000' does not match '^dma-controller(@.*)?$' Update the dma node name to match pl330 dtschema. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220130075520.49193-1-alim.akhtar@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2020-11-10ARM: dts: exynos: use hyphens in Exynos4 node namesKrzysztof Kozlowski
Use hyphens instead of underscores in the Exynos4210 and Exynos4412 node names which is expected by naming convention, multiple dtschema files and pointed out by dtc W=2 builds. Use also generic "ppmu" node name for PPMU nodes to match Devicetree specification. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201105184506.215648-2-krzk@kernel.org
2020-07-07ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warningsKrzysztof Kozlowski
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2019-10-06ARM: dts: exynos: Rename power domain nodes to "power-domain" in Exynos4Krzysztof Kozlowski
The device node name should reflect generic class of a device so rename power domain nodes to "power-domain". No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-30ARM: dts: exynos: Use standard arrays of generic PHYs for EHCI/OHCI devicesMarek Szyprowski
Move USB PHYs to a standard arrays for Exynos EHCI/OHCI devices. This resolves the conflict between Exynos EHCI/OHCI sub-nodes and generic USB device bindings. Once the Exynos EHCI/OHCI sub-nodes are removed, the boards can finally provide sub-nodes for the USB devices using generic USB device bindings. Suggested-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20190726081453.9456-4-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-01ARM: dts: exynos: Move Mali400 GPU node to "/soc"Marek Szyprowski
Mali400 GPU hardware module is a standard hardware module integrated to Exynos3210/4210/4412 SoCs, so it should reside under the "/soc" node. The only SoC components which are placed in the DT root, are those, which are a part of CPUs: like ARM architected timers and ARM performance measurement units. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-07-01ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210Marek Szyprowski
The PMU module of Mali400 GPU is optional and it looks that it is not present on Exynos4210, because any access to its registers causes external abort. This patch removes "pmu" interrupt for Exynos4210 SoCs, so the driver will skip the PMU module. This fixes following fault during kernel boot: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 (lima_pmu_init) from [<c059e6f8>] (lima_device_init+0x244/0x5a0) (lima_device_init) from [<c059e40c>] (lima_pdev_probe+0x7c/0xd8) (lima_pdev_probe) from [<c05afcb8>] (platform_drv_probe+0x48/0x9c) (platform_drv_probe) from [<c05ad594>] (really_probe+0x1c4/0x400) (really_probe) from [<c05ad988>] (driver_probe_device+0x78/0x1b8) (driver_probe_device) from [<c05add30>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<c05ade34>] (__driver_attach+0xfc/0x160) (__driver_attach) from [<c05ab650>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<c05ac734>] (bus_add_driver+0x104/0x20c) (bus_add_driver) from [<c05aece0>] (driver_register+0x78/0x10c) (driver_register) from [<c0103214>] (do_one_initcall+0x8c/0x430) (do_one_initcall) from [<c0f01328>] (kernel_init_freeable+0x3c8/0x4d0) (kernel_init_freeable) from [<c0ac3aa0>] (kernel_init+0x8/0x10c) (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) The PMU module seems to work fine on Exynos4412 SoCs, so the patch also moves the interrupt definitions to exynos4210.dtsi and exynos4412.dtsi respectively, to keep only the common part in exynos4.dtsi. Fixes: 13efd80acaa4 ("ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4Krzysztof Kozlowski
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the GPU as much as possible however still few elements are missing: 1. Exynos4210 bus clock is not described in hardware manual therefore the IP gate clock was provided, 2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused), 3. Regulator supplies on Trats board. Limited testing on Odroid U3 (Exynos4412). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-19ARM: dts: exynos: Add PMU interrupt affinity to Exynos4 boardsKrzysztof Kozlowski
Move SoC-specific PMU properties from exynos4.dtsi to respective SoC (4210 or 4412) so common DTSI would have only common properties. Define there also interrupt affinity to remove the boot warning message: hw perfevents: no interrupt-affinity property for /pmu, guessing. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210Krzysztof Kozlowski
The Universal C210 (Exynos4210) uses the secure interface of MDMA0, instead of regular one - non-secure MDMA1. DTS was overriding MDMA1 node address which caused DTC W=1 warning: arch/arm/boot/dts/exynos4.dtsi:707.25-716.6: Warning (simple_bus_reg): /soc/amba/mdma@12850000: simple-bus unit address format error, expected "12840000" Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-24ARM: dts: exynos: Move pmu and timer nodes out of socKrzysztof Kozlowski
The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like: arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5: Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-06-25ARM: dts: exynos: remove no longer needed samsung thermal propertiesBartlomiej Zolnierkiewicz
Remove no longer needed samsung thermal properties. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-04-21ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMUKrzysztof Kozlowski
The PMU node is the actual block responsible for power management, including typical Exynos on/off/restart procedures. Therefore the syscon poweroff and restart nodes logically belong to it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2018-02-26ARM: dts: exynos: Fix address of PPMU ACP on Exynos4210Krzysztof Kozlowski
Typo in unit address of PPMU ACP caused DTC warnings: arch/arm/boot/dts/exynos4412-odroidu3.dtb: Warning (simple_bus_reg): Node /soc/ppmu_acp@10ae0000 simple-bus unit address format error, expected "106e0000" PPMU ACP (under 0x10ae0000 address) is present only in Exynos4210 so move this node to exynos4210.dtsi with fixing the reg address to proper one. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-02-13ARM: dts: exynos: Add soc node to exynos4Maciej Purski
Soc nodes are used in other exynos DTS. Exynos4 boards should use them as well. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-13ARM: dts: exynos: Use pmu label in exynos4412Maciej Purski
In order to use soc node, we need to reference soc child nodes by label in exynos4412. Define pmu label in exynos4.dtsi. Use it in exynos4412 instead of redefining the node by full path. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-13ARM: dts: exynos: Use labels instead of full paths in exynos4210Maciej Purski
Extend camera, mixer and tmu nodes by labels, not by full path in Exynos 4210 DTSI. This avoids error-prone redefinition of nodes. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-03ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-12-18ARM: dts: exynos: Use lower case hex addresses in node unit addressesKrzysztof Kozlowski
Convert all hex addresses in node unit addresses to lower case to fix warnings like: arch/arm/boot/dts/exynos5422-odroidhc1.dtb: Warning (simple_bus_reg): Node /soc/nocp@10CA1000 simple-bus unit address format error, expected "10ca1000" Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/exynos*.dts* Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-27ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card bindingSylwester Nawrocki
The new sound card DT binding is used for Odroid XU3 in order to properly support the HDMI audio path. Clocks configuration is changed so the I2S controller is now the bit clock and the frame clock master. The EPLL output clock is now the audio root clock adjusted to each audio sample rate. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27ARM: dts: exynos: Add clocks to audss block to fix silent hang on Exynos4412Krzysztof Kozlowski
Add necessary parent clocks for audss (Audio SubSystem, MAUDIO) clock controller block. This allows driver to keep EPLL enabled before accessing any MAUDIO registers thus fixing silent hang. This silent hang appeared with commit 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks"), e.g. on Odroid U3 usually with last (but unrelated) messages: [ 2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci [ 2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-31Merge tag 'samsung-dt-hdmi-cec-4.12' into next/dtKrzysztof Kozlowski
Add to hdmi-cec node a phandle to hdmi node for new hdmi-cec notifier.
2017-03-31ARM: dts: exynos: add HDMI controller phandle to exynos4.dtsiHans Verkuil
Add the new hdmi phandle to exynos4.dtsi. This phandle is needed by the s5p-cec driver to initialize the CEC notifier framework. Tested with my Odroid U3. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-13ARM: dts: exynos: Fix watchdog reset on Exynos4412Krzysztof Kozlowski
The Exynos4412 has the same watchdog as newer SoCs (e.g. Exynos5250). Just like the others, for working it requires additional steps in Power Management Unit: unmasking the reset request and enabling the system reset. Without these additional steps in PMU, the watchdog will not be able to reset the system on expiration event. Change the compatible of Exynos4412 watchdog device node to samsung,exynos5250-wdt which includes the additional PMU steps. This will also fix infinite watchdog interrupt in soft mode (lack of interrupt clear) because it is also included in samsung,exynos5250-wdt. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2017-01-31ARM: dts: exynos: Add labels to all existing power domainsMarek Szyprowski
Provide human readable names for all power domains defined in Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-29ARM: dts: exynos: Fix indentation of EHCI and OHCI portsKrzysztof Kozlowski
Replace spaces with tabs in EHCI and OHCI ports indentation. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-12-28ARM: dts: exynos: Correct clocks for Exynos4 I2S moduleMarek Szyprowski
"iis", "i2s_opclk0" and "i2s_opclk1" are standard clocks for Exynos4 I2S hardware module, so they should be defined in .dtsi file not in the random board .dts file. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-18Merge tag 'samsung-dt-gic-flags-4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Topic branch with DT changes for v4.10. Fix invalid GIC interrupt flags - type IRQ_TYPE_NONE is not allowed for GIC interrupts. Although this was working but with error messages like: genirq: Setting trigger mode 0 for irq 16 failed Use level high interrupt instead of type none. The choice of level high was rather an arbitrary decision hoping it will work on each platform. Tests shown no issues so far. * tag 'samsung-dt-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4 ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210 ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4 Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-05ARM: dts: exynos: Add SCU device node to exynos4.dtsiPankaj Dubey
Exynos4 like other Cortex-A9 SoC's has a Snoop Control Unit(SCU) and its SFR are used during SMP boot and S2R. Add SCU node to the device tree. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-03ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4Krzysztof Kozlowski
Replace hard-coded values of type of GIC interrupt and its flags with respective macros from header to increase code readability. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-03ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4Krzysztof Kozlowski
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and generates an error: genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68) The GIC requires shared interrupts to be edge rising or level high. Platform declares support for both. Arbitrarily choose level high everywhere hoping it will work on each platform. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Alban Browaeys <alban.browaeys@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-09-01ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos4Javier Martinez Canillas
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-06-08ARM: dts: exynos: enable MFC device for all boardsMarek Szyprowski
MFC device can be used without any external hardware dependencies (when IOMMU is enabled), so it can be enabled by default (like it has been already done for Exynos 542x platforms). This unifies handling of this device for Exynos3250, Exynos4 and Exynos542x platforms. Board can still include exynos-mfc-reserved-memory.dtsi to enable using this device without IOMMU being enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-28Merge tag 'samsung-dt-exynos-srom-fixup-4.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Merge "ARM: dts: exynos: Fixup for SROM controller (v4.7)" from Krzysztof Kozlowski: DeviceTree changes for new SROM controller driver reached mainline some time ago, before the driver was accepted (due to very late comments). However, after these late comments, the driver expects different bindings so we need to fix the DTS. * tag 'samsung-dt-exynos-srom-fixup-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: change SROM node compatible from generic to model specific
2016-04-27ARM: dts: exynos: Enable PRNG and SSS for all Exynos4 devicesKrzysztof Kozlowski
There is no external dependency for Security SubSystem (SSS) block so the nodes for Pseudo Random Number Generator and AES hardware acceleration can be enabled always for all Exynos4 devices. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-18ARM: dts: change SROM node compatible from generic to model specificPankaj Dubey
This patch changes SROM nodes compatible from generic to model specific to match with binding documentation. Also updating property "samsung,srom-page-mode" as it is not defined as bool instead of int Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-13ARM: dts: exynos: Fix DTC unit name warnings in Exynos4Krzysztof Kozlowski
Fix following DTC warnings in all Exynos4 boards: Warning (unit_address_vs_reg): Node /soc/video-phy@10020710 has a unit name, but no reg property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-03-29ARM: dts: exynos: Add node for the HDMI CEC device to exynos4Kamil Debski
This patch adds HDMI CEC node specific to the Exynos4210/4x12 SoC series. Signed-off-by: Kamil Debski <kamil@wypas.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
generated by cgit (git 2.34.1) at 2024-06-04 18:34:59 +0000