summaryrefslogtreecommitdiff
path: root/drivers/clk/ti
AgeCommit message (Collapse)Author
2024-03-19Merge tag 'soc-late-6.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "These are changes that for some reason ended up not making it into the first four branches but that should still make it into 6.9: - A rework of the omap clock support that touches both drivers and device tree files - The reset controller branch changes that had a dependency on late bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the drivers branch - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree changes that got delayed and needed some extra time in linux-next for wider testing" * tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: fsl: dpio: fix kcalloc() argument order bus: ts-nbus: Improve error reporting bus: ts-nbus: Convert to atomic pwm API riscv: dts: starfive: jh7110: Add camera subsystem nodes ARM: bcm: stop selecing CONFIG_TICK_ONESHOT ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift clk: ti: Improve clksel clock bit parsing for reg property clk: ti: Handle possible address in the node name dt-bindings: pwm: opencores: Add compatible for StarFive JH8100 dt-bindings: riscv: cpus: reg matches hart ID reset: Instantiate reset GPIO controller for shared reset-gpios reset: gpio: Add GPIO-based reset controller cpufreq: do not open-code of_phandle_args_equal() of: Add of_phandle_args_equal() helper reset: simple: add support for Sophgo SG2042 dt-bindings: reset: sophgo: support SG2042 riscv: dts: microchip: add specific compatible for mpfs pdma riscv: dts: microchip: add missing CAN bus clocks ARM: brcmstb: Add debug UART entry for 74165 ...
2024-02-28clk: ti: dpll3xxx: use correct function names in kernel-docRandy Dunlap
Use function names that match the implementation in kernel-doc comments to avoid kernel-doc warnings: dpll3xxx.c:938: warning: expecting prototype for omap3_non_core_dpll_save_context(). Prototype was for omap3_noncore_dpll_save_context() instead dpll3xxx.c:967: warning: expecting prototype for omap3_core_dpll_restore_context(). Prototype was for omap3_noncore_dpll_restore_context() instead Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Tero Kristo <kristo@kernel.org> Cc: linux-omap@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20240115054739.4988-1-rdunlap@infradead.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-02-26clk: ti: Improve clksel clock bit parsing for reg propertyTony Lindgren
Because of legacy reasons, the TI clksel composite clocks can have overlapping reg properties, and use a custom ti,bit-shift property. For the clksel clocks we can start using of the standard reg property instead of the custom ti,bit-shift property. To do this, let's add a ti_clk_get_legacy_bit_shift() helper, and make ti_clk_get_reg_addr() populate the clock bit offset. This makes it possible to update the devicetree files to use the reg property one clock at a time. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2024-02-26clk: ti: Handle possible address in the node nameTony Lindgren
In order to use #address-cells = <1> and start making use of the standard reg property, let's prepare things to ignore the possible address in the clock node name. Unless the clock-output-names property is used, the legacy clocks still fall back to matching the clock data based on the node name. We use cleanup.h to simplify the return path for freeing tmp. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-31Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver updates from Stephen Boyd: "Herein lies a smallish collection of clk driver updates and some core clk framework changes for the merge window. The core framework changes are only improving the debugfs interface to allow phase adjustments and report which consumers of a clk there are. These are most likely only of interest to kernel developers. On the clk driver side, it's a ghastly amount of updates with only a handful of new clk drivers. We have a couple new clk drivers for Qualcomm, per usual, and a driver for Renesas, Amlogic, and TI respectively. The updates are spread throughout the clk drivers. Some highlights are fixing kunit tests for different configurations like lockdep and big-endian, avoiding integer overflow in rate settable clks, moving clk_hw_onecell_data to the end of allocations so that drivers don't corrupt their private data, and migrating clk drivers to the regmap maple tree. Otherwise it's the usual fixes to clk drivers that only come along with testing the drivers on real hardware. New Drivers: - Add clock driver for TWL6032 - Initial support for the Qualcomm SM4450 Global Clock Controller and SM4450 RPMh clock controllers - Add Camera Clock Controller on Qualcomm SM8550 - Add support for the Renesas RZ/G3S (R9A08G045) SoC - Add Amlogic s4 main clock controller support Updates: - Make clk kunit tests work with lockdep - Fix clk gate kunit test for big-endian - Convert more than a handful of clk drivers to use regmap maple tree - Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk implementation - Add consumer info to clk debugfs - Fix various clk drivers that have clk_hw_onecell_data not at the end of an allocation - Drop CLK_SET_RATE_PARENT for clocks with fixed-rate GPLLs across a variety of Qualcomm IPQ platforms - Add missing parent of APCS PLL on Qualcomm IPQ6018 - Add I2C QUP6 clk on Qualcomm IPQ6018 but mark it critical to avoid problems with RPM - Implement safe source switching for a53pll and use on Qualcomm IPQ5332 - Add support for Stromer Plus PLLs to Qualcomm clk driver - Switch Qualcomm SM8550 Video and GPU clock controllers to use OLE PLL configure method - Non critical fixes to halt bit checks in Qualcomm clk drivers - Add SMMU GDSC for Qualcomm MSM8998 - Fix possible integer overflow in Qualcomm RCG frequency calculation code - Remove RPM managed clks from Qualcomm MSM8996 GCC driver - Add HFPLL configuration for the three HFPLLs in Qualcomm MSM8976 - Switch Qualcomm MSM8996 CBF clock driver's remove function to return void - Fix missing dependency for s4 clock controllers - Select MXC_CLK when building in the CLK_IMX8QXP - Fixes for error handling paths in i.MX8 ACM driver - Move the clocks check in i.MX8 ACM driver in order to log any error - Drop the unused return value of clk_imx_acm_detach_pm_domains - Drop non-existant IMX8MP_CLK_AUDIOMIX_PDM_ROOT clock - Fix error handling in i.MX8MQ clock driver - Allow a different LCDIF1 clock parent if DT describes it for i.MX6SX - Keep the SCU resource table sorted in the i.MX8DXL rsrc driver - Move the elcdif PLL clock registration above lcd_clk, as it is its parent - Correct some ENET specific clocks for i.MX8DXL platform - Drop the VPU_UART and VPUCORE from i.MX8QM as latest HW revision doesn't have them - Remove "de-featured" MLB support from i.MX8QM/QXP/DXL platforms - Skip registering clocks owned by Cortex-A partition SCU-based platforms - Add CAN_1/2 to i.MX8QM and M4_0, PI_0_PWM_0 and PI_0_I2C_0 to i.MX8QXP resources" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits) clk: Fix clk gate kunit test on big-endian CPUs clk: si521xx: Increase stack based print buffer size in probe clk: mediatek: fix double free in mtk_clk_register_pllfh() clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data clk: sifive: Allow building the driver as a module clk: analogbits: Allow building the library as a module clk: sprd: Composite driver support offset config clk: Allow phase adjustment from debugfs clk: Show active consumers of clocks in debugfs clk: Use device_get_match_data() clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider clk: cdce925: Extend match support for OF tables clk: si570: Simplify probe clk: si5351: Simplify probe clk: rs9: Use i2c_get_match_data() instead of device_get_match_data() clk: clk-si544: Simplify probe() and is_valid_frequency() clk: si521xx: Use i2c_get_match_data() instead of device_get_match_data() clk: meson: S4: select CONFIG_COMMON_CLK_MESON_CLKC_UTILS ...
2023-10-23clk: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231006213959.334439-1-robh@kernel.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #msm part Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung Acked-by: David Lechner <david@lechnology.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-10-18clk: ti: fix double free in of_ti_divider_clk_setup()Dan Carpenter
The "div" pointer is freed in _register_divider() and again in of_ti_divider_clk_setup(). Delete the free in _register_divider() Fixes: fbbc18591585 ("clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/6d36eeec-6c8a-4f11-a579-aa3cd7c38749@moroto.mountain Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-10-13clk: ti: Fix missing omap5 mcbsp functional clock and aliasesTony Lindgren
We are using a wrong mcbsp functional clock. The interconnect target module driver provided clock for mcbsp is not same as the mcbsp functional clock known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should have been added before we dropped the legacy platform data. Additionally we are also missing the clock aliases for the clocks used by the audio driver if reparenting is needed. This causes audio driver errors like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas. The mcbsp clock aliases too should have been added before we dropped the legacy platform data. Let's add the clocks and aliases with a single patch to fix the issue similar to omap4. On omap5, there is no mcbsp4 instance on the l4_per interconnect. Fixes: b1da0fa21bd1 ("ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp") Cc: H. Nikolaus Schaller <hns@goldelico.com> Reported-by: Andreas Kemnade <andreas@kemnade.info> Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-10-13clk: ti: Fix missing omap4 mcbsp functional clock and aliasesTony Lindgren
We are using a wrong mcbsp functional clock. The interconnect target module driver provided clock for mcbsp is not same as the mcbsp functional clock known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should have been added before we dropped the legacy platform data. Additionally we are also missing the clock aliases for the clocks used by the audio driver if reparenting is needed. This causes audio driver errors like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas. The mcbsp clock aliases too should have been added before we dropped the legacy platform data. Let's add the clocks and aliases with a single patch to fix the issue. Fixes: 349355ce3a05 ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp") Reported-by: Andreas Kemnade <andreas@kemnade.info> Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-08-30Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and ↵Stephen Boyd
'clk-rockchip' into clk-next - Add Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK - Introduce kstrdup_and_replace() and use it * clk-versa: clk: vc7: Use i2c_get_match_data() instead of device_get_match_data() clk: vc5: Use i2c_get_match_data() instead of device_get_match_data() clk: versaclock3: Switch to use i2c_driver's probe callback clk: Add support for versa3 clock driver dt-bindings: clock: Add Renesas versa3 clock generator bindings * clk-strdup: clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace() clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace() driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace() lib/string_helpers: Add kstrdup_and_replace() helper * clk-amlogic: (22 commits) dt-bindings: soc: amlogic: document System Control registers dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema clk: meson: axg-audio: move bindings include to main driver clk: meson: meson8b: move bindings include to main driver clk: meson: a1: move bindings include to main driver clk: meson: eeclk: move bindings include to main driver clk: meson: aoclk: move bindings include to main driver dt-bindings: clk: axg-audio-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids dt-bindings: clk: meson8b-clkc: expose all clock ids dt-bindings: clk: g12a-aoclkc: expose all clock ids dt-bindings: clk: g12a-clks: expose all clock ids dt-bindings: clk: axg-clkc: expose all clock ids dt-bindings: clk: gxbb-clkc: expose all clock ids clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS ... * clk-allwinner: clk: sunxi-ng: nkm: Prefer current parent rate clk: sunxi-ng: a64: select closest rate for pll-video0 clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: Add helper function to find closest rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: nkm: Use correct parameter name for parent HW clk: sunxi-ng: Modify mismatched function name clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource() * clk-rockchip: clk: rockchip: rv1126: Add PD_VO clock tree clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz clk: rockchip: rk3568: Add PLL rate for 101MHz
2023-08-22clk: ti: Use devm_platform_get_and_ioremap_resource()Yangtao Li
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230705065313.67043-10-frank.li@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-04clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()Andy Shevchenko
Replace open coded functionality of kstrdup_and_replace() with a call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230804143910.15504-5-andriy.shevchenko@linux.intel.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-16clk: ti: clkctrl: check return value of kasprintf()Claudiu Beznea
kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 852049594b9a ("clk: ti: clkctrl: convert subclocks to use proper names also") Fixes: 6c3090520554 ("clk: ti: clkctrl: Fix hidden dependency to node name") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230530093913.1656095-8-claudiu.beznea@microchip.com Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-04-25Merge branches 'clk-xilinx', 'clk-broadcom' and 'clk-platform' into clk-nextStephen Boyd
- BCM63268 timer clock and reset controller - Convert platform clk drivers to remove_new * clk-xilinx: clocking-wizard: Support higher frequency accuracy clk: zynqmp: pll: Remove the limit * clk-broadcom: clk: bcm: Add BCM63268 timer clock and reset driver dt-bindings: clock: Add BCM63268 timer binding dt-bindings: reset: add BCM63268 timer reset definitions dt-bindings: clk: add BCM63268 timer clock definitions * clk-platform: (25 commits) clk: xilinx: Convert to platform remove callback returning void clk: x86: Convert to platform remove callback returning void clk: uniphier: Convert to platform remove callback returning void clk: ti: Convert to platform remove callback returning void clk: tegra: Convert to platform remove callback returning void clk: stm32: Convert to platform remove callback returning void clk: mvebu: Convert to platform remove callback returning void clk: mmp: Convert to platform remove callback returning void clk: keystone: Convert to platform remove callback returning void clk: hisilicon: Convert to platform remove callback returning void clk: stm32mp1: Convert to platform remove callback returning void clk: scpi: Convert to platform remove callback returning void clk: s2mps11: Convert to platform remove callback returning void clk: pwm: Convert to platform remove callback returning void clk: palmas: Convert to platform remove callback returning void clk: hsdk-pll: Convert to platform remove callback returning void clk: fixed-rate: Convert to platform remove callback returning void clk: fixed-mmio: Convert to platform remove callback returning void clk: fixed-factor: Convert to platform remove callback returning void clk: axm5516: Convert to platform remove callback returning void ...
2023-03-28clk: ti: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230312161512.2715500-28-u.kleine-koenig@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-03-27clk: ti: Use of_address_to_resource()Rob Herring
Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230319163217.226144-1-robh@kernel.org Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-22clk: ti: fix typo in ti_clk_retry_init() code commentDario Binacchi
Replace "not" with "node". Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20221106155625.3476564-1-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-22clk: ti: dra7-atl: don't allocate `parent_names' variableDario Binacchi
The `parent_names' variable was freed also in case of kzalloc() error. Instead of modifying the code to perform a proper memory release, I decided to fix the bug by not allocating memory. Since only one parent name is referenced, it is not necessary to allocate this variable at runtime and therefore you can avoid calling the kzalloc() function. This simplifies the code (even calls to kfree can be removed) and improves the performance of the routine. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221113181147.1626585-2-dario.binacchi@amarulasolutions.com Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-22clk: ti: change ti_clk_register[_omap_hw]() APIDario Binacchi
The ti_clk_register() and ti_clk_register_omap_hw() functions are always called with the parameter of type "struct device" set to NULL, since the functions from which they are called always have a parameter of type "struct device_node". Replacing "struct device" type parameter with "struct device_node" will allow you to register a TI clock to the common clock framework by taking advantage of the facilities provided by the "struct device_node" type. Further, adding the "of_" prefix to the name of these functions explicitly binds them to the "struct device_node" type. The patch has been tested on a Beaglebone board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221113181147.1626585-1-dario.binacchi@amarulasolutions.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-08Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have some late breaking reports that a patch series to rework clk rate range support broke boot on some devices, so I've left that branch out of this. Hopefully we can get to that next week, or punt on it and let it bake another cycle. That means we don't really have any changes to the core framework this time around besides a few typo fixes. Instead this is all clk driver updates and fixes. The usual suspects are here (again), with Qualcomm dominating the diffstat. We look to have gained support for quite a few new Qualcomm SoCs and Dmitry worked on updating many of the existing Qualcomm drivers to use clk_parent_data. After that we have MediaTek drivers getting some much needed updates, in particular to support GPU DVFS. There are also quite a few Samsung clk driver patches, but that's mostly because there was a maintainer change and so last release we missed some of those patches. Overall things look normal, but I'm slowly reviewing core framework code nowadays and that shows given the rate range patches had to be yanked last minute. Let's hope this situation changes soon. New Drivers: - Support for Renesas VersaClock7 clock generator family - Add Spreadtrum UMS512 SoC clk support - New clock drivers for MediaTek Helio X10 MT6795 - Display clks for Qualcomm SM6115, SM8450 - GPU clks for Qualcomm SC8280XP - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers Deleted Drivers: - Remove DaVinci DM644x and DM646x clk driver support Updates: - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - More devm helpers for fixed rate registration - Various PXA168 clk driver fixes - Add resets for MediaTek MT8195 PCIe and USB - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging - Add missing DPI1_HDMI clock in MT8195 VDOSYS1 - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195 - Fix GPU clock topology on MT8195 - Propogate rate changes from GPU clock gate up the tree - Clock mux notifiers for GPU-related PLLs - Conversion of more "simple" drivers to mtk_clk_simple_probe() - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek - Shrink MT8192 clock driver by deduplicating clock parent lists - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk' clocks for i.MX8MP - Drop unnecessary newline in i.MX8MM dt-bindings - Add more MU1 and SAI clocks dt-bindings Ids - Introduce slice busy bit check for i.MX93 composite clock - Introduce white list bit check for i.MX93 composite clock - Add new i.MX93 clock gate - Add MU1 and MU2 clocks to i.MX93 clock provider - Add SAI IPG clocks to i.MX93 clock provider - add generic clocks for U(S)ART available on SAMA5D2 SoCs - reset controller support for Polarfire clocks - .round_rate and .set rate support for clk-mpfs - code cleanup for clk-mpfs - PLL support for PolarFire SoC's Clock Conditioning Circuitry - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8 - Add I2C clocks and resets on RZ/V2M - Document clock support for the RZ/Five SoC - mux-variant clock using the table variant to select parents - clock controller for the rv1126 soc - conversion of rk3128 to yaml and relicensing of the yaml bindings to gpl2+MIT (following dt-binding guildelines) - Exynos7885: add FSYS, TREX and MFC clock controllers - Exynos850: add IS and AUD (audio) clock controllers with bindings - ExynosAutov9: add FSYS clock controllers with bindings - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers - ExynosAutov9: add few missing Peric 0/1 gates - ExynosAutov9: correct register offsets of few Peric 0/1 clocks - Minor code improvements (use of_device_get_match_data() helper, code style) - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration - Qualcomm SDM660 SDCC1 moved to floor clk ops - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was added/fixed - The Qualcomm MSM8996 CPU clocks are updated with support for ACD - Support for Qualcomm SDM670 GCC and RPMh clks was added - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for many Qualcomm SoCs - Support for per-reset defined delay on Qualcomm was introduced" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: ast2600: BCLK comes from EPLL clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: nxp: fix typo in comment clk: pxa: add a check for the return value of kzalloc() clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: imx: scu: fix memleak on platform_device_add() fails clk: vc5: Use regmap_{set,clear}_bits() where appropriate ...
2022-10-04Merge branches 'clk-ofnode', 'clk-bindings', 'clk-cleanup', 'clk-zynq' and ↵Stephen Boyd
'clk-xilinx' into clk-next - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging * clk-ofnode: clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: tegra20: Fix refcount leak in tegra20_clock_init clk: tegra: Fix refcount leak in tegra114_clock_init clk: tegra: Fix refcount leak in tegra210_clock_init clk: sprd: Hold reference returned by of_get_parent() clk: berlin: Add of_node_put() for of_get_parent() clk: at91: dt-compat: Hold reference returned by of_get_parent() clk: qoriq: Hold reference returned by of_get_parent() clk: oxnas: Hold reference returned by of_get_parent() clk: st: Hold reference returned by of_get_parent() clk: tegra: Add missing of_node_put() clk: meson: Hold reference returned by of_get_parent() clk: nomadik: Add missing of_node_put() * clk-bindings: dt-bindings: clock: drop minItems equal to maxItems dt-bindings: clock: gpio-gate-clock: Convert to json-schema dt-bindings: clock: Move versaclock.h to dt-bindings/clock dt-bindings: clock: Move lochnagar.h to dt-bindings/clock * clk-cleanup: clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: nxp: fix typo in comment clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clkdev: Simplify devm_clk_hw_register_clkdev() function clkdev: Remove never used devm_clk_release_clkdev() clk: Remove never used devm_of_clk_del_provider() clk: pistachio: Fix initconst confusion clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data clk: do not initialize ret clk: remove extra empty line clk: Fix comment typo clk: move from strlcpy with unused retval to strscpy * clk-zynq: clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate clk: zynqmp: Check the return type zynqmp_pm_query_data clk: zynqmp: Add a check for NULL pointer clk: zynqmp: Replaced strncpy() with strscpy() clk: zynqmp: Fix stack-out-of-bounds in strncpy` clk: zynqmp: make bestdiv unsigned * clk-xilinx: clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: clocking-wizard: Update the compatible clk: clocking-wizard: Fix the reconfig for 5.2 clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs clk: clocking-wizard: Move clocking-wizard out dt-bindings: add documentation of xilinx clocking wizard
2022-09-30clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probeMiaoqian Lin
pm_runtime_get_sync() will increment pm usage counter. Forgetting to putting operation will result in reference leak. Add missing pm_runtime_put_sync in some error paths. Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220602030838.52057-1-linmq006@gmail.com Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-30clk: ti: Balance of_node_get() calls for of_find_node_by_name()Liang He
In ti_find_clock_provider(), of_find_node_by_name() will call of_node_put() for the 'from' argument, possibly putting the node one too many times. Let's maintain the of_node_get() from the previous search and only put when we're exiting the function early. This should avoid a misbalanced reference count on the node. Fixes: 51f661ef9a10 ("clk: ti: Add ti_find_clock_provider() to use clock-output-names") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220915031121.4003589-1-windhl@126.com [sboyd@kernel.org: Rewrite commit text, maintain reference instead of get again] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-19clk: ti: Fix missing of_node_get() ti_find_clock_provider()Tony Lindgren
For ti_find_clock_provider() we want to return the np with refcount incremented. However we are missing of_node_get() for the clock-output-names case that causes refcount warnings. Fixes: 51f661ef9a10 ("clk: ti: Add ti_find_clock_provider() to use clock-output-names") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220621091118.33930-1-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-08-04Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The clk core gains a new set of APIs that allow drivers to both acquire clks and prepare and enable them at the same time. This also comes with devm support so that drivers can make a single call to get and prepare and enable the clk and have that all undone when their driver is removed. Many folks have requested this feature over the years, but we've had disagreements about how to implement it and if it was worthwhile to encourage drivers to use such an API. Now it's here, so let's see how it goes. I hope that by introducing this API we can identify drivers that would benefit from further consolidation of clk API usage, possibly by moving such logic to the bus layer and out of drivers altogether. Outside of that major API update, we have the usual collection of driver updates. A few new SoCs are supported, mostly Qualcomm and Renesas this time around. Then we have the long tail of non-critical fixes and minor feature additions to various clk drivers. And finally more clk provider migration to struct clk_parent_data, reducing boot times in the process. Summary: Core: - devm helpers for clk_get() + clk_prepare() and clk_enable() New Drivers: - Support for the camera clock controller in Qualcomm SM8450 and the display and gpu clock controllers in Qualcomm SM8350 - Add support for the Renesas RZ/Five SoC Updates: - Various fixes, new clocks and USB GDSCs are introduced for Qualcomm IPQ8074 - Fixes to Qualcomm MSM8939 for issues introduced by inheriting the MSM8916 GCC driver - Support for a new type of voteable GDSCs used by Qualcomm SC8280XP PCIe GDSCs - Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux implementation - Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994 GCC are migrated to use clk_parent_data - Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845 and SM8250 - Qualcomm MSM8916 gains more possible frequencies for its GP clocks. - The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic the design in IPQ8074 to allow the GCC driver to probe earlier. - The regulator based mmcx supply for Qualcomm dispcc and videocc is dropped, as the only upstream target that adapted this interface was transitioned several kernel versions ago - Qualcomm GDSCs found to be enabled at boot will now reflect in the enable count of the supply, as was done with the regulator supplies previously - Correct adc1, nic_media and edma1's parents for NXP i.MX93 - rdiv, mfd values, the return rate in recalc_rate and add more frequencies in the table for fracn-gppll on i.MX - Remove Allwinner workaround logic/compatible in fixed factor code - MediaTek clk driver cleanups - Add reset support to more MediaTek clk drivers - deduplicate Allwinner ccu_clks arrays - Allwinner H6 GPU DFS support - Adjust Allwinner Kconfig to limit choice - Fix initconst confusion on Renesas R-Car Gen4 - Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L - Add PFC and WDT clocks and resets on Renesas RZ/V2M - Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on Renesas R-Car S4-8" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits) clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw() clk: mux: Introduce devm_clk_hw_register_mux_parent_hws() clk: divider: Introduce devm_clk_hw_register_divider_parent_hw() clk: qcom: gcc-msm8994: use parent_hws for gpll0/4 clk: qcom: clk-rpm: convert to parent_data API dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled clk: qcom: Drop mmcx gdsc supply for dispcc and videocc clk: qcom: fix build error initializer element is not constant clk: sprd: Add dt-bindings include file for UMS512 dt-bindings: clk: sprd: Add bindings for ums512 clock controller clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources clk: qcom: add support for SM8350 DISPCC ...
2022-06-16clk: ti: Stop using legacy clkctrl names for omap4 and 5Tony Lindgren
With the addition of clock-output-names, we can now unify the internal clock naming for omap4 and 5 to follow the other TI SoCs. We are still using legacy clkctrl names for omap4 and 5 based on the clock manager name which is wrong. Instead, we want to use the clkctrl clock based naming. We must now also drop the legacy TI_CLK_CLKCTRL_COMPAT quirk for the clkctrl clock. This change will allow further devicetree warning cleanup as already done for am3/4 and dra7. Cc: linux-clk@vger.kernel.org Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220615064306.22254-1-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULEThomas Gleixner
Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner
(part 1) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-20clk: ti: clkctrl: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220324071019.59483-1-jakobkoschel@gmail.com Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-20clk: ti: composite: Prefer kcalloc over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210904131714.2312-1-len.baker@gmx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-15clk: ti: clkctrl: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220314115354.144023-15-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: ti: Drop legacy compatibility clocks for dra7Tony Lindgren
We no longer have users for the compatibility clocks and we can drop them. These are old duplicate clocks for what we using. Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl") Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section") Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220203085618.16043-4-tony@atomide.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: ti: Drop legacy compatibility clocks for am4Tony Lindgren
We no longer have users for the compatibility clocks and we can drop them. These are old duplicate clocks for what we using. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220203085618.16043-3-tony@atomide.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: ti: Drop legacy compatibility clocks for am3Tony Lindgren
We no longer have users for the compatibility clocks and we can drop them. These are old duplicate clocks for what we using. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220203085618.16043-2-tony@atomide.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Update component clocks to use ti_dt_clk_name()Tony Lindgren
Let's update all the TI component clocks to use ti_dt_clk_name() instead of devicetree node name if available. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-9-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()Tony Lindgren
Let's update the TI pll and clockdomain clocks to use ti_dt_clk_name() instead of devicetree node name if available. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-8-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Add ti_dt_clk_name() helper to use clock-output-namesTony Lindgren
Let's create the clock alias based on the clock-output-names property if available. Also the component clock drivers can use ti_dt_clk_name() in the following patches. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-7-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Use clock-output-names for clkctrlTony Lindgren
Use clock-output-names devicetree property for clkctrl clocks if available. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-6-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Add ti_find_clock_provider() to use clock-output-namesTony Lindgren
Let's add ti_find_clock_provider() so we can use clock-output-names to name the clock provider instead of relying on non-standard devicetree node names. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-5-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Optionally parse IO address from parent clock nodeTony Lindgren
If no reg property is specified for a TI clock, let's try to use the parent clock node IO address. This way we can avoid duplicate devicetree reg properties that cause warnings for unique_unit_address. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-4-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Preserve node in ti_dt_clocks_register()Tony Lindgren
In preparation for making use of the clock-output-names, we want to keep node around in ti_dt_clocks_register(). This change should not needed as a fix currently. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-3-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-10clk: ti: Constify clkctrl_nameTony Lindgren
We can constify clkctrl_name in preparation for making use of the clock-output-names property. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220204071449.16762-2-tony@atomide.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-09clk/ti/adpll: Make const pointer error a static const arrayColin Ian King
Make const pointer error a static const array, removes a dereference and shrinks object code a little. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211127173036.150535-1-colin.i.king@gmail.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-20clk: ti: am43xx: Add clkctrl data for am43xx ADC1Miquel Raynal
Declare ADC1 clkctrl which feeds the magnetic-reader/ADC1 hardware module. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211015081506.933180-2-miquel.raynal@bootlin.com
2021-06-27drivers: ti: remove redundant error message in adpll.cYu Jiahua
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Yu Jiahua <yujiahua1@huawei.com> Link: https://lore.kernel.org/r/20210616034826.37276-1-yujiahua1@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clk: ti: add am33xx/am43xx spread spectrum clock supportDario Binacchi
The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs. As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for DDR, PER, and CORE PLLs. Calculating the required values and setting the registers accordingly was taken from the set_mpu_spreadspectrum routine contained in the arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project. In locked condition, DPLL output clock = CLKINP *[M/N]. In case of SSC enabled, the reference manual explains that there is a restriction of range of M values. Since the omap2_dpll_round_rate routine attempts to select the minimum possible N, the value of M obtained is not guaranteed to be within the range required. With the new "ti,min-div" parameter it is possible to increase N and consequently M to satisfy the constraint imposed by SSC. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Tero Kristo <kristo@kernel.org> Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clk: ti: fix typo in routine descriptionDario Binacchi
Replace _omap3_noncore_dpll_program with omap3_noncore_dpll_program. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20210606202253.31649-2-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-10clk: ti: omap5: Add missing gpmc and ocmc clkctrlTony Lindgren
The gpmc clock is needed to update omap5 to boot with genpd with the related devicetree patches. The ocmc clock is currently not used but let's add it so we have all the clocks for the l3main2 defined. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-02-11clk: ti: gate: Fix possible doc-rot in ↵Lee Jones
'omap36xx_gate_clk_enable_with_hsdiv_restore' Fixes the following W=1 kernel build warning(s): drivers/clk/ti/gate.c:67: warning: Function parameter or member 'hw' not described in 'omap36xx_gate_clk_enable_with_hsdiv_restore' drivers/clk/ti/gate.c:67: warning: Excess function parameter 'clk' description in 'omap36xx_gate_clk_enable_with_hsdiv_restore' Cc: Tero Kristo <kristo@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-omap@vger.kernel.org Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-17-lee.jones@linaro.org Reviewed-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-04 14:51:31 +0000