| Age | Commit message (Collapse) | Author |
|---|
|
Finally drop separate "parsing" submodule. There is no need in it
anymore. All submodules handle DT properties directly rather than
passing them via the separate structure pointer.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576116/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-15-098d5f581dd3@linaro.org
|
|
Remove two levels of indirection and fetch next bridge directly in
dp_display_probe_tail().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576126/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-14-098d5f581dd3@linaro.org
|
|
Instead of passing link properties through the separate struct, parse
them directly in the dp_panel.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576117/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-13-098d5f581dd3@linaro.org
|
|
Rather than parsing the I/O addresses from dp_parser and then passing
them via a struct pointer to dp_catalog, handle I/O region parsing in
dp_catalog and drop it from dp_parser.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576108/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-12-098d5f581dd3@linaro.org
|
|
There is little point in sharing phy configuration structure between
several modules. Move it to dp_ctrl, which becomes the only submodule
re-configuring the PHY.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576124/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-9-098d5f581dd3@linaro.org
|
|
All supported platforms use the same clocks configuration. Instead of
parsing names from DT in a pretty complex manner, use the static
configuration. If at some point newer (or older) platforms have
different clock configuration, this clock config can be moved to the
device data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576115/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-7-098d5f581dd3@linaro.org
|
|
There is only a single DP_STREAM_PM clock, stream_pixel. Instead of
using a separate dss_module_power instance for this single clock, handle
this clock directly. This allows us to drop several wrapping functions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576102/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-6-098d5f581dd3@linaro.org
|
|
It makes little sense to split the submodule get and actual DT parsing.
Call dp_parser_parse() directly from dp_parser_get(), so that the parser
data is fully initialised once it is returned to the caller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576101/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-3-098d5f581dd3@linaro.org
|
|
Drop several unused and obsolete definitions from the dp_parser module.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/576110/
Link: https://lore.kernel.org/r/20240126-dp-power-parser-cleanup-v3-1-098d5f581dd3@linaro.org
|
|
from link-frequencies property of dp_out endpoint
Changes in v6:
-- second patch after split parser patch into two patches
Changes in v7:
-- without checking cnt against DP_MAX_NUM_DP_LANES to retrieve link rate
Changes in v9:
-- separate parser link-frequencies out of data-lanes
Changes in v10:
-- add dp_parser_link_frequencies()
Changes in v11:
-- return 0 if(!endpoint)
Changes in v12:
-- replace khz with kbytes at dp_parser.h
Changes in v14:
-- replace "parser" with "parse" at commit subject
-- use do_div() for 64 bits division
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516100/
Link: https://lore.kernel.org/r/1672163103-31254-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Device-managed resources allocated post component bind must be tied to
the lifetime of the aggregate DRM device or they will not necessarily be
released when binding of the aggregate device is deferred.
This can lead resource leaks or failure to bind the aggregate device
when binding is later retried and a second attempt to allocate the
resources is made.
For the DP bridges, previously allocated bridges will leak on probe
deferral.
Fix this by amending the DP parser interface and tying the lifetime of
the bridge device to the DRM device rather than DP platform device.
Fixes: c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus")
Cc: stable@vger.kernel.org # 5.19
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502667/
Link: https://lore.kernel.org/r/20220913085320.8577-8-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
|
|
Vdda regulators are related to both eDP and DP phy so that it should be
managed at eDP and DP phy driver instead of controller. This patch removes
vdda regulators related functions out of eDP/DP controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1657038556-2231-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In order to simplify DP code, drop hand-coded loops over clock arrays,
replacing them with clk_bulk_* functions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474717/
Link: https://lore.kernel.org/r/20220217055529.499829-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This patch adds support for generic eDP sink through aux_bus. The eDP/DP
controller driver should support aux transactions originating from the
panel-edp driver and hence should be initialized and ready.
The panel bridge supporting the panel should be ready before the bridge
connector is initialized. The generic panel probe needs the controller
resources to be enabled to support the aux transactions originating from
the panel probe.
Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483307/
Link: https://lore.kernel.org/r/1650887072-16652-2-git-send-email-quic_sbillaka@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
|
|
Currently DP driver will allocate panel bridge for eDP panels. This
supports only the following topology:
- eDP encoder ⇒ eDP panel (wrapped using panel-bridge)
Simplify this code to just check if there is any next bridge in the
chain (be it a panel bridge or regular bridge). Rename panel_bridge
field to next_bridge accordingly.
This allows one to use e.g. one of the following display topologies:
- eDP encoder ⇒ ptn3460 ⇒ fixed LVDS panel
- eDP encoder ⇒ ptn3460 ⇒ LVDS connector with EDID lines for panel autodetect
- eDP encoder ⇒ ptn3460 ⇒ THC63LVD1024 ⇒ DPI panel.
- eDP encoder ⇒ LT8912 ⇒ DSI panel
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220211224006.1797846-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
DPU driver contains code to parse clock items from device tree into
special data struct and then enable/disable/set rate for the clocks
using that data struct. However the DPU driver itself uses only parsing
and enabling/disabling part (the rate setting is used by DP driver).
Move this implementation to the DP driver (which actually uses rate
setting) and replace hand-coded enable/disable/get loops in the DPU
with the respective clk_bulk operations. Put operation is removed
completely because, it is handled using devres instead.
DP implementation is unchanged for now.
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and RB5 (qrb5165)
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217055529.499829-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
eDP panels might need some power sequencing and backlight management,
so make it possible to associate a drm_panel with an eDP instance and
prepare and enable the panel accordingly.
Now that we know which hardware instance is DP and which is eDP,
parser->parse() is passed the connector_type and the parser is limited
to only search for a panel in the eDP case.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-5-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Not all platforms has DP_P0 at offset 0x1000 from the beginning of the
DP block. So split the dss_io_data memory region into a set of
sub-regions, to make it possible in the next patch to specify each of
the sub-regions individually.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-5-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In order to deal with multiple memory ranges in the following commit
change the ioremap wrapper to not poke directly into the dss_io_data
struct.
While at it, devm_ioremap_resource() already prints useful error
messages on failure, so omit the unnecessary prints from the caller.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211001174400.981707-4-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Make the necessary changes to the DP driver to use the qmp phy from the
common phy framework instead of rolling our own in the drm subsystem.
This also removes the PLL code and adds proper includes so things build.
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
add event thread to execute events serially from event queue. Also
timeout mode is supported which allow an event be deferred to be
executed at later time. Both link and phy compliant tests had been
done successfully.
Changes in v2:
-- Fix potential deadlock by removing redundant connect_mutex
-- Check and enable link clock during modeset
-- Drop unused code and fix function prototypes.
-- set sink power to normal operation state (D0) before DPCD read
Changes in v3:
-- push idle pattern at main link before timing generator off
-- add timeout handles for both connect and disconnect
Changes in v4:
-- add ST_SUSPEND_PENDING to handles suspend/modeset test operations
-- clear dp phy aux interrupt status when ERR_DPPHY_AUX error
-- send segment addr during edid read
-- clear bpp depth before MISC register write
Changes in v5:
-- add ST_SUSPENDED to fix crash at resume
Changes in v6:
-- at msm_dp_display_enable() do not return until resume_done to avoid
kms commit timeout
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add the needed DP PLL specific files to support
display port interface on msm targets.
The DP driver calls the DP PLL driver registration.
The DP driver sets the link and pixel clock sources.
Changes in v2:
-- Update copyright markings on all relevant files.
-- Use DRM_DEBUG_DP for debug msgs.
Changes in v4:
-- Update the DP link clock provider names
Changes in V5:
-- Addressed comments from Stephen Boyd, Rob clark.
Changes in V6:
-- Remove PLL as separate driver and include PLL as DP module
-- Remove redundant clock parsing from PLL module and make DP as
clock provider
-- Map USB3 DPCOM and PHY IO using hardcoded register address and
move mapping form parser to PLL module
-- Access DP PHY modules from same base address using offsets instead of
deriving base address of individual module from device tree.
-- Remove dp_pll_10nm_util.c and include its functionality in
dp_pll_10nm.c
-- Introduce new data structures private to PLL module
Changes in v7:
-- Remove DRM_MSM_DP_PLL config from Makefile and Kconfig
-- Remove set_parent from determin_rate API
-- Remove phy_pll_vco_div_clk from parent list
-- Remove flag CLK_DIVIDER_ONE_BASED
-- Remove redundant cell-index property parsing
Changes in v8:
-- Unregister hardware clocks during driver cleanup
Changes in v9:
-- Remove redundant Kconfig option DRM_MSM_DP_10NM_PLL
Changes in v10:
-- Limit 10nm PLL function scope
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add the needed displayPort files to enable DP driver
on msm target.
"dp_display" module is the main module that calls into
other sub-modules. "dp_drm" file represents the interface
between DRM framework and DP driver.
Changes in v12:
-- Add support of pm ops in display port driver
-- Clear bpp depth bits before writing to MISC register
-- Fix edid read
Previous Change log:
https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Co-developed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
