summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd/xgbe
AgeCommit message (Collapse)Author
2025-05-28Merge tag 'net-next-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter: - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF: - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols: - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API: - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling: - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers: - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the steering table handling to significantly reduce the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature" * tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits) selftests/bpf: Fix bpf selftest build warning selftests: netfilter: Fix skip of wildcard interface test net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames net: openvswitch: Fix the dead loop of MPLS parse calipso: Don't call calipso functions for AF_INET sk. selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem net_sched: hfsc: Address reentrant enqueue adding class to eltree twice octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback octeontx2-pf: QOS: Perform cache sync on send queue teardown net: mana: Add support for Multi Vports on Bare metal net: devmem: ncdevmem: remove unused variable net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add ipv4 support net: devmem: preserve sockc_err page_pool: fix ugly page_pool formatting net: devmem: move list_add to net_devmem_bind_dmabuf. selftests: netfilter: nft_queue.sh: include file transfer duration in log message net: phy: mscc: Fix memory leak when using one step timestamping ...
2025-05-13amd-xgbe: add support for new pci device id 0x1641Raju Rangoju
Add support for new pci device id 0x1641 to register Renoir device with PCIe. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-6-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: Add XGBE_XPCS_ACCESS_V3 support to xgbe_pci_probe()Raju Rangoju
A new version of XPCS access routines have been introduced, add the support to xgbe_pci_probe() to use these routines. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-5-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: add support for new XPCS routinesRaju Rangoju
Add the necessary support to enable Renoir ethernet device. Since the BAR1 address cannot be used to access the XPCS registers on Renoir, use the smn functions. Some of the ethernet add-in-cards have dual PHY but share a single MDIO line (between the ports). In such cases, link inconsistencies are noticed during the heavy traffic and during reboot stress tests. Using smn calls helps avoid such race conditions. Suggested-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-4-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: reorganize the xgbe_pci_probe() code pathRaju Rangoju
Reorganize the xgbe_pci_probe() code path to convert if/else statements to switch case to help add future code. This helps code look cleaner. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-3-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-13amd-xgbe: reorganize the code of XPCS accessRaju Rangoju
The xgbe_{read/write}_mmd_regs_v* functions have common code which can be moved to helper functions. Add new helper functions to calculate the mmd_address for v1/v2 of xpcs access. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250509155325.720499-2-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc5). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offloadVishal Badole
According to the XGMAC specification, enabling features such as Layer 3 and Layer 4 Packet Filtering, Split Header and Virtualized Network support automatically selects the IPC Full Checksum Offload Engine on the receive side. When RX checksum offload is disabled, these dependent features must also be disabled to prevent abnormal behavior caused by mismatched feature dependencies. Ensure that toggling RX checksum offload (disabling or enabling) properly disables or enables all dependent features, maintaining consistent and expected behavior in the network device. Cc: stable@vger.kernel.org Fixes: 1a510ccf5869 ("amd-xgbe: Add support for VXLAN offload capabilities") Signed-off-by: Vishal Badole <Vishal.Badole@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc2). Conflict: Documentation/networking/netdevices.rst net/core/lock_debug.c 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-08amd-xgbe: Convert to SPDX identifierRaju Rangoju
Use SPDX-License-Identifier accross all the files of the xgbe driver to ensure compliance with Linux kernel standards, thus removing the boiler-plate template license text. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250407102913.3063691-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-01-28Merge tag 'driver-core-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the big set of driver core and debugfs updates for 6.14-rc1. Included in here is a bunch of driver core, PCI, OF, and platform rust bindings (all acked by the different subsystem maintainers), hence the merge conflict with the rust tree, and some driver core api updates to mark things as const, which will also require some fixups due to new stuff coming in through other trees in this merge window. There are also a bunch of debugfs updates from Al, and there is at least one user that does have a regression with these, but Al is working on tracking down the fix for it. In my use (and everyone else's linux-next use), it does not seem like a big issue at the moment. Here's a short list of the things in here: - driver core rust bindings for PCI, platform, OF, and some i/o functions. We are almost at the "write a real driver in rust" stage now, depending on what you want to do. - misc device rust bindings and a sample driver to show how to use them - debugfs cleanups in the fs as well as the users of the fs api for places where drivers got it wrong or were unnecessarily doing things in complex ways. - driver core const work, making more of the api take const * for different parameters to make the rust bindings easier overall. - other small fixes and updates All of these have been in linux-next with all of the aforementioned merge conflicts, and the one debugfs issue, which looks to be resolved "soon"" * tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) rust: device: Use as_char_ptr() to avoid explicit cast rust: device: Replace CString with CStr in property_present() devcoredump: Constify 'struct bin_attribute' devcoredump: Define 'struct bin_attribute' through macro rust: device: Add property_present() saner replacement for debugfs_rename() orangefs-debugfs: don't mess with ->d_name octeontx2: don't mess with ->d_parent or ->d_parent->d_name arm_scmi: don't mess with ->d_parent->d_name slub: don't mess with ->d_name sof-client-ipc-flood-test: don't mess with ->d_name qat: don't mess with ->d_name xhci: don't mess with ->d_iname mtu3: don't mess wiht ->d_iname greybus/camera - stop messing with ->d_iname mediatek: stop messing with ->d_iname netdevsim: don't embed file_operations into your structs b43legacy: make use of debugfs_get_aux() b43: stop embedding struct file_operations into their objects carl9170: stop embedding file_operations into their objects ...
2025-01-15net: ethernet: xgbe: re-add aneg to supported features in PHY quirksHeiner Kallweit
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES included feature bits for aneg and TP/MII ports. SUPPORTED_TP | \ SUPPORTED_MII) SUPPORTED_10baseT_Full) SUPPORTED_100baseT_Full) SUPPORTED_1000baseT_Full) PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) PHY_1000BT_FEATURES) Referenced commit expanded PHY_GBIT_FEATURES, silently removing PHY_DEFAULT_FEATURES. The removed part can be re-added by using the new PHY_GBIT_FEATURES definition. Not clear to me is why nobody seems to have noticed this issue. I stumbled across this when checking what it takes to make phy_10_100_features_array et al private to phylib. Fixes: d0939c26c53a ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15saner replacement for debugfs_rename()Al Viro
Existing primitive has several problems: 1) calling conventions are clumsy - it returns a dentry reference that is either identical to its second argument or is an ERR_PTR(-E...); in both cases no refcount changes happen. Inconvenient for users and bug-prone; it would be better to have it return 0 on success and -E... on failure. 2) it allows cross-directory moves; however, no such caller have ever materialized and considering the way debugfs is used, it's unlikely to happen in the future. What's more, any such caller would have fun issues to deal with wrt interplay with recursive removal. It also makes the calling conventions clumsier... 3) tautological rename fails; the callers have no race-free way to deal with that. 4) new name must have been formed by the caller; quite a few callers have it done by sprintf/kasprintf/etc., ending up with considerable boilerplate. Proposed replacement: int debugfs_change_name(dentry, fmt, ...). All callers convert to that easily, and it's simpler internally. IMO debugfs_rename() should go; if we ever get a real-world use case for cross-directory moves in debugfs, we can always look into the right way to handle that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250112080705.141166-21-viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-29amd-xgbe: use ethtool string helpersRosen Penev
The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the pointer. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241022233203.9670-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: ethernet: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09amd-xgbe: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20240906144632.404651-5-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-31net: xgbe: Convert tasklet API to new bottom half workqueue mechanismAllen Pais
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the xgbe driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://patch.msgid.link/20240730183403.4176544-3-allen.lkml@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACYDamien Le Moal
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-15-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-04-05net: xgbe: remove extraneous #ifdef checksArnd Bergmann
When both ACPI and OF are disabled, xgbe_v1 is unused and causes a W=1 warning: drivers/net/ethernet/amd/xgbe/xgbe-platform.c:533:39: error: unused variable 'xgbe_v1' [-Werror,-Wunused-const-variable] static const struct xgbe_version_data xgbe_v1 = { There is no real point in trying to save a few bytes for the match tables, so just make them always visible. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240403080702.3509288-29-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13amd-xgbe: Avoid potential string truncation in nameKees Cook
Build with W=1 were warning about a potential string truncation: drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function 'xgbe_alloc_channels': drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:73: warning: '%u' directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:64: note: directive argument in the range [0, 4294967294] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:17: note: 'snprintf' output between 10 and 19 bytes into a destination of size 16 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Increase the size of the "name" buffer to handle the full format range. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312100937.ZPZCARhB-lkp@intel.com/ Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231212221312.work.830-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23amd-xgbe: propagate the correct speed and duplex statusRaju Rangoju
xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle the corner-case during tx completionRaju Rangoju
The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle corner-case during sfp hotplugRaju Rangoju
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-13net: ethernet: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20net: ethernet: amd: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-13amd-xgbe: extend 10Mbps support to MAC version 21HRaju Rangoju
MAC version 21H supports the 10Mbps speed. So, extend support to platforms that support it. Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-26amd-xgbe: fix the false linkup in xgbe_phy_statusRaju Rangoju
In the event of a change in XGBE mode, the current auto-negotiation needs to be reset and the AN cycle needs to be re-triggerred. However, the current code ignores the return value of xgbe_set_mode(), leading to false information as the link is declared without checking the status register. Fix this by propagating the mode switch status information to xgbe_phy_status(). Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06amd-xgbe: fix mismatched prototypeArnd Bergmann
The forward declaration was introduced with a prototype that does not match the function definition: drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd, enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch] 2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int, unsigned int)' 391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Ideally there should not be any forward declarations here, which would make it easier to show that there is no unbounded recursion. I tried fixing this but could not figure out how to avoid the recursive call. As a hotfix, address only the broken prototype to fix the build problem instead. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230203121553.2871598-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02amd-xgbe: add support for rx-adaptationRaju Rangoju
The existing implementation for non-Autonegotiation 10G speed modes does not enable RX adaptation in the Driver and FW. The RX Equalization settings (AFE settings alone) are manually configured and the existing link-up sequence in the driver does not perform rx adaptation process as mentioned in the Synopsys databook. There's a customer request for 10G backplane mode without Auto-negotiation and for the DAC cables of more significant length that follow the non-Autonegotiation mode. These modes require PHY to perform RX Adaptation. The proposed logic adds the necessary changes to Yellow Carp devices to ensure seamless RX Adaptation for 10G-SFI (LONG DAC) and 10G-KR without AN (CL72 not present). The RX adaptation core algorithm is executed by firmware, however, to achieve that a new mailbox sub-command is required to be sent by the driver. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02amd-xgbe: add 2.5GbE support to 10G BaseT modeRaju Rangoju
Add support to the driver to fully recognize and enable 2.5GbE speed in 10GBaseT mode. Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17amd-xgbe: Replace MII_ADDR_C45 with XGBE_ADDR_C45Andrew Lunn
The xgbe driver reuses MII_ADDR_C45 for its own purpose. The values derived with it are never passed to phylib or a linux MDIO bus driver. In order that MII_ADDR_C45 can be removed, add an XGBE specific Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17amd-xgbe: Separate C22 and C45 transactionsAndrew Lunn
The xgbe MDIO bus driver can perform both C22 and C45 transfers, when using its MDIO bus hardware. The SFP I2C mdio bus driver only supports C22. Create separate functions for each and register the C45 versions using the new API calls where appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12amd-xgbe: Delay AN timeout during KR trainingRaju Rangoju
AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Driver has to wait upto 500ms or until the KR training is completed before restarting AN cycle. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12amd-xgbe: TX Flow Ctrl Registers are h/w ver dependentRaju Rangoju
There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. The older revisions of hardware used to have single register per queue. Whereas, the newer revision of hardware (from ver 30H onwards) have one register per priority. Update the driver to use the TFCR based on the reported version of the hardware. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10amd-xgbe: Add support for 10 Mbps speedRaju Rangoju
Add the necessary changes to support 10 Mbps speed for BaseT and SFP port modes. This is supported in MAC ver >= 30H. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://lore.kernel.org/r/20230109101819.747572-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-30net: amd-xgbe: add missed tasklet_killJiguang Xiao
The driver does not call tasklet_kill in several places. Add the calls to fix it. Fixes: 85b85c853401 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by: Jiguang Xiao <jiguang.xiao@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in the left-over fixes before the net-next pull-request. net/mptcp/subflow.c d3295fee3c75 ("mptcp: use proper req destructor for IPv6") 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-12net: amd-xgbe: Check only the minimum speed for active/passive cablesTom Lendacky
There are cables that exist that can support speeds in excess of 10GbE. The driver, however, restricts the EEPROM advertised nominal bitrate to a specific range, which can prevent usage of cables that can support, for example, up to 25GbE. Rather than checking that an active or passive cable supports a specific range, only check for a minimum supported speed. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-12net: amd-xgbe: Fix logic around active and passive cablesTom Lendacky
SFP+ active and passive cables are copper cables with fixed SFP+ end connectors. Due to a misinterpretation of this, SFP+ active cables could end up not being recognized, causing the driver to fail to establish a connection. Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is the default cable type, and handle active and passive cables when they are specifically detected. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-31ptp: xgbe: convert to .adjfine and adjust_by_scaled_ppmJacob Keller
The xgbe implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this driver to .adjfine and use adjust_by_scaled_ppm to calculate the new addend value. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-21amd-xgbe: add the bit rate quirk for Molex cablesRaju Rangoju
The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex passive cables have the rate ceiling 0x78 at offset 12. Add a quirk for Molex passive cables to extend the rate ceiling to 0x78. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21amd-xgbe: fix the SFP compliance codes check for DAC cablesRaju Rangoju
The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive) cables is NULL. However, some cables (the 5 meter and 7 meter Molex passive cables) have non-zero data at offset 6. Fix the logic by moving the passive cable check above the active checks, so as not to be improperly identified as an active cable. This will fix the issue for any passive cable that advertises 1000Base-CX in offset 6. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21amd-xgbe: enable PLL_CTL for fixed PHY modes onlyRaju Rangoju
PLL control setting(RRC) is needed only in fixed PHY configuration to fix the peer-peer issues. Without the PLL control setting, the link up takes longer time in a fixed phy configuration. Driver implements SW RRC for Autoneg On configuration, hence PLL control setting (RRC) is not needed for AN On configuration, and can be skipped. Also, PLL re-initialization is not needed for PHY Power Off and RRC commands. Otherwise, they lead to mailbox errors. Added the changes accordingly. Fixes: daf182d360e5 ("net: amd-xgbe: Toggle PLL settings during rate change") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21amd-xgbe: use enums for mailbox cmd and sub_cmdsRaju Rangoju
Instead of using hardcoded values, use enumerations for mailbox command and sub commands. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>