diff options
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r-- | include/net/cfg80211.h | 122 |
1 files changed, 81 insertions, 41 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7709b92..f7c84c3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -72,12 +72,12 @@ struct wiphy; * * @IEEE80211_CHAN_DISABLED: This channel is disabled. * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes - * sending probe requests or beaconing. + * sending probe requests or beaconing. * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel - * is not permitted. + * is not permitted. * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel - * is not permitted. + * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, * this flag indicates that an 80 MHz channel cannot use this @@ -627,6 +627,41 @@ struct cfg80211_chan_def { }; /** + * struct cfg80211_tid_cfg - TID specific configuration + * @config_override: Flag to notify driver to reset TID configuration + * of the peer. + * @tids: bitmap of TIDs to modify + * @mask: bitmap of attributes indicating which parameter changed, + * similar to &nl80211_tid_config_supp. + * @noack: noack configuration value for the TID + * @retry_long: retry count value + * @retry_short: retry count value + * @ampdu: Enable/Disable aggregation + * @rtscts: Enable/Disable RTS/CTS + */ +struct cfg80211_tid_cfg { + bool config_override; + u8 tids; + u32 mask; + enum nl80211_tid_config noack; + u8 retry_long, retry_short; + enum nl80211_tid_config ampdu; + enum nl80211_tid_config rtscts; +}; + +/** + * struct cfg80211_tid_config - TID configuration + * @peer: Station's MAC address + * @n_tid_conf: Number of TID specific configurations to be applied + * @tid_conf: Configuration change info + */ +struct cfg80211_tid_config { + const u8 *peer; + u32 n_tid_conf; + struct cfg80211_tid_cfg tid_conf[]; +}; + +/** * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * @@ -1686,7 +1721,7 @@ struct mpath_info { * @basic_rates_len: number of basic rates * @ap_isolate: do not forward packets between connected stations * @ht_opmode: HT Operation mode - * (u16 = opmode, -1 = do not change) + * (u16 = opmode, -1 = do not change) * @p2p_ctwindow: P2P CT Window (-1 = no change) * @p2p_opp_ps: P2P opportunistic PS (-1 = no change) */ @@ -2062,8 +2097,8 @@ struct cfg80211_bss_select_adjust { * @ie_len: length of ie in octets * @flags: bit field of flags controlling operation * @match_sets: sets of parameters to be matched for a scan result - * entry to be considered valid and to be passed to the host - * (others are filtered out). + * entry to be considered valid and to be passed to the host + * (others are filtered out). * If ommited, all results are passed. * @n_match_sets: number of match sets * @report_results: indicates that results were reported for this request @@ -2456,7 +2491,7 @@ struct cfg80211_disassoc_request { * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. * @wep_keys: static WEP keys, if not NULL points to an array of - * CFG80211_MAX_WEP_KEYS WEP keys + * CFG80211_MAX_WEP_KEYS WEP keys * @wep_tx_key: key index (0..3) of the default TX static WEP key */ struct cfg80211_ibss_params { @@ -3369,6 +3404,8 @@ struct cfg80211_update_owe_info { * @set_default_key: set the default key on an interface * * @set_default_mgmt_key: set the default management frame key on an interface + + * @set_default_beacon_key: set the default Beacon frame key on an interface * * @set_rekey_data: give the data necessary for GTK rekeying to the driver * @@ -3669,6 +3706,10 @@ struct cfg80211_update_owe_info { * * @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame * and overrule HWMP path selection algorithm. + * @set_tid_config: TID specific configuration, this can be peer or BSS specific + * This callback may sleep. + * @reset_tid_config: Reset TID specific configuration for the peer, for the + * given TIDs. This callback may sleep. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -3702,6 +3743,9 @@ struct cfg80211_ops { int (*set_default_mgmt_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); + int (*set_default_beacon_key)(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index); int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ap_settings *settings); @@ -3974,8 +4018,7 @@ struct cfg80211_ops { int (*tx_control_port)(struct wiphy *wiphy, struct net_device *dev, const u8 *buf, size_t len, - const u8 *dest, const u8 *src, - const __be16 proto, + const u8 *dest, const __be16 proto, const bool noencrypt); int (*get_ftm_responder_stats)(struct wiphy *wiphy, @@ -3990,6 +4033,10 @@ struct cfg80211_ops { struct cfg80211_update_owe_info *owe_info); int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev, const u8 *buf, size_t len); + int (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_tid_config *tid_conf); + int (*reset_tid_config)(struct wiphy *wiphy, struct net_device *dev, + const u8 *peer, u8 tids); }; /* @@ -4427,7 +4474,7 @@ struct wiphy_iftype_akm_suites { * note that if your driver uses wiphy_apply_custom_regulatory() * the reg_notifier's request can be passed as NULL * @regd: the driver's regulatory domain, if one was requested via - * the regulatory_hint() API. This can be used by the driver + * the regulatory_hint() API. This can be used by the driver * on the reg_notifier() if it chooses to ignore future * regulatory domain changes caused by other drivers. * @signal_type: signal type reported in &struct cfg80211_bss. @@ -4463,10 +4510,11 @@ struct wiphy_iftype_akm_suites { * the same number of arbitrary MAC addresses. * @registered: protects ->resume and ->suspend sysfs callbacks against * unregister hardware - * @debugfsdir: debugfs directory used for this wiphy, will be renamed - * automatically on wiphy renames - * @dev: (virtual) struct device for this wiphy - * @registered: helps synchronize suspend/resume with wiphy unregister + * @debugfsdir: debugfs directory used for this wiphy (ieee80211/<wiphyname>). + * It will be renamed automatically on wiphy renames + * @dev: (virtual) struct device for this wiphy. The item in + * /sys/class/ieee80211/ points to this. You need use set_wiphy_dev() + * (see below). * @wext: wireless extension handlers * @priv: driver private data (sized according to wiphy_new() parameter) * @interface_modes: bitmask of interfaces types valid for this wiphy, @@ -4577,12 +4625,6 @@ struct wiphy_iftype_akm_suites { * and probe responses. This value should be set if the driver * wishes to limit the number of csa counters. Default (0) means * infinite. - * @max_adj_channel_rssi_comp: max offset of between the channel on which the - * frame was sent and the channel on which the frame was heard for which - * the reported rssi is still valid. If a driver is able to compensate the - * low rssi when a frame is heard on different channel, then it should set - * this variable to the maximal offset for which it can compensate. - * This value should be set in MHz. * @bss_select_support: bitmask indicating the BSS selection criteria supported * by the driver in the .connect() callback. The bit position maps to the * attribute indices defined in &enum nl80211_bss_select_attr. @@ -4602,11 +4644,19 @@ struct wiphy_iftype_akm_suites { * @support_mbssid must be set for this to have any effect. * * @pmsr_capa: peer measurement capabilities + * + * @tid_config_support: describes the per-TID config support that the + * device has + * @tid_config_support.vif: bitmap of attributes (configurations) + * supported by the driver for each vif + * @tid_config_support.peer: bitmap of attributes (configurations) + * supported by the driver for each peer + * @tid_config_support.max_retry: maximum supported retry count for + * long/short retry configuration */ struct wiphy { /* assign these fields before you register the wiphy */ - /* permanent MAC address(es) */ u8 perm_addr[ETH_ALEN]; u8 addr_mask[ETH_ALEN]; @@ -4673,11 +4723,6 @@ struct wiphy { u32 available_antennas_tx; u32 available_antennas_rx; - /* - * Bitmap of supported protocols for probe response offloading - * see &enum nl80211_probe_resp_offload_support_attr. Only valid - * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set. - */ u32 probe_resp_offload; const u8 *extended_capabilities, *extended_capabilities_mask; @@ -4686,16 +4731,10 @@ struct wiphy { const struct wiphy_iftype_ext_capab *iftype_ext_capab; unsigned int num_iftype_ext_capab; - /* If multiple wiphys are registered and you're handed e.g. - * a regular netdev with assigned ieee80211_ptr, you won't - * know whether it points to a wiphy your driver has registered - * or not. Assign this to something global to your driver to - * help determine whether you own this wiphy or not. */ const void *privid; struct ieee80211_supported_band *bands[NUM_NL80211_BANDS]; - /* Lets us get back the wiphy on the callback */ void (*reg_notifier)(struct wiphy *wiphy, struct regulatory_request *request); @@ -4703,14 +4742,10 @@ struct wiphy { const struct ieee80211_regdomain __rcu *regd; - /* the item in /sys/class/ieee80211/ points to this, - * you need use set_wiphy_dev() (see below) */ struct device dev; - /* protects ->resume, ->suspend sysfs callbacks against unregister hw */ bool registered; - /* dir in debugfs: ieee80211/<wiphyname> */ struct dentry *debugfsdir; const struct ieee80211_ht_cap *ht_capa_mod_mask; @@ -4718,7 +4753,6 @@ struct wiphy { struct list_head wdev_list; - /* the network namespace this phy lives in currently */ possible_net_t _net; #ifdef CONFIG_CFG80211_WEXT @@ -4734,7 +4768,6 @@ struct wiphy { u16 max_ap_assoc_sta; u8 max_num_csa_counters; - u8 max_adj_channel_rssi_comp; u32 bss_select_support; @@ -4751,6 +4784,13 @@ struct wiphy { const struct cfg80211_pmsr_capabilities *pmsr_capa; + struct { + u64 peer, vif; + u8 max_retry; + } tid_config_support; + + u8 max_data_retry_count; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -5526,9 +5566,9 @@ void cfg80211_send_layer2_update(struct net_device *dev, const u8 *addr); * @wiphy: the wireless device giving the hint (used only for reporting * conflicts) * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain - * should be in. If @rd is set this should be NULL. Note that if you - * set this to NULL you should still set rd->alpha2 to some accepted - * alpha2. + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. * * Wireless drivers can use this function to hint to the wireless core * what it believes should be the current regulatory domain by |