diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/net/cfg80211.h | 122 | ||||
| -rw-r--r-- | include/net/mac80211.h | 10 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 114 |
3 files changed, 193 insertions, 53 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7709b92..f7c84c3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -72,12 +72,12 @@ struct wiphy; * * @IEEE80211_CHAN_DISABLED: This channel is disabled. * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes - * sending probe requests or beaconing. + * sending probe requests or beaconing. * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel - * is not permitted. + * is not permitted. * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel - * is not permitted. + * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, * this flag indicates that an 80 MHz channel cannot use this @@ -627,6 +627,41 @@ struct cfg80211_chan_def { }; /** + * struct cfg80211_tid_cfg - TID specific configuration + * @config_override: Flag to notify driver to reset TID configuration + * of the peer. + * @tids: bitmap of TIDs to modify + * @mask: bitmap of attributes indicating which parameter changed, + * similar to &nl80211_tid_config_supp. + * @noack: noack configuration value for the TID + * @retry_long: retry count value + * @retry_short: retry count value + * @ampdu: Enable/Disable aggregation + * @rtscts: Enable/Disable RTS/CTS + */ +struct cfg80211_tid_cfg { + bool config_override; + u8 tids; + u32 mask; + enum nl80211_tid_config noack; + u8 retry_long, retry_short; + enum nl80211_tid_config ampdu; + enum nl80211_tid_config rtscts; +}; + +/** + * struct cfg80211_tid_config - TID configuration + * @peer: Station's MAC address + * @n_tid_conf: Number of TID specific configurations to be applied + * @tid_conf: Configuration change info + */ +struct cfg80211_tid_config { + const u8 *peer; + u32 n_tid_conf; + struct cfg80211_tid_cfg tid_conf[]; +}; + +/** * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * @@ -1686,7 +1721,7 @@ struct mpath_info { * @basic_rates_len: number of basic rates * @ap_isolate: do not forward packets between connected stations * @ht_opmode: HT Operation mode - * (u16 = opmode, -1 = do not change) + * (u16 = opmode, -1 = do not change) * @p2p_ctwindow: P2P CT Window (-1 = no change) * @p2p_opp_ps: P2P opportunistic PS (-1 = no change) */ @@ -2062,8 +2097,8 @@ struct cfg80211_bss_select_adjust { * @ie_len: length of ie in octets * @flags: bit field of flags controlling operation * @match_sets: sets of parameters to be matched for a scan result - * entry to be considered valid and to be passed to the host - * (others are filtered out). + * entry to be considered valid and to be passed to the host + * (others are filtered out). * If ommited, all results are passed. * @n_match_sets: number of match sets * @report_results: indicates that results were reported for this request @@ -2456,7 +2491,7 @@ struct cfg80211_disassoc_request { * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. * @wep_keys: static WEP keys, if not NULL points to an array of - * CFG80211_MAX_WEP_KEYS WEP keys + * CFG80211_MAX_WEP_KEYS WEP keys * @wep_tx_key: key index (0..3) of the default TX static WEP key */ struct cfg80211_ibss_params { @@ -3369,6 +3404,8 @@ struct cfg80211_update_owe_info { * @set_default_key: set the default key on an interface * * @set_default_mgmt_key: set the default management frame key on an interface + + * @set_default_beacon_key: set the default Beacon frame key on an interface * * @set_rekey_data: give the data necessary for GTK rekeying to the driver * @@ -3669,6 +3706,10 @@ struct cfg80211_update_owe_info { * * @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame * and overrule HWMP path selection algorithm. + * @set_tid_config: TID specific configuration, this can be peer or BSS specific + * This callback may sleep. + * @reset_tid_config: Reset TID specific configuration for the peer, for the + * given TIDs. This callback may sleep. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -3702,6 +3743,9 @@ struct cfg80211_ops { int (*set_default_mgmt_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); + int (*set_default_beacon_key)(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index); int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ap_settings *settings); @@ -3974,8 +4018,7 @@ struct cfg80211_ops { int (*tx_control_port)(struct wiphy *wiphy, struct net_device *dev, const u8 *buf, size_t len, - const u8 *dest, const u8 *src, - const __be16 proto, + const u8 *dest, const __be16 proto, const bool noencrypt); int (*get_ftm_responder_stats)(struct wiphy *wiphy, @@ -3990,6 +4033,10 @@ struct cfg80211_ops { struct cfg80211_update_owe_info *owe_info); int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev, const u8 *buf, size_t len); + int (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_tid_config *tid_conf); + int (*reset_tid_config)(struct wiphy *wiphy, struct net_device *dev, + const u8 *peer, u8 tids); }; /* @@ -4427,7 +4474,7 @@ struct wiphy_iftype_akm_suites { * note that if your driver uses wiphy_apply_custom_regulatory() * the reg_notifier's request can be passed as NULL * @regd: the driver's regulatory domain, if one was requested via - * the regulatory_hint() API. This can be used by the driver + * the regulatory_hint() API. This can be used by the driver * on the reg_notifier() if it chooses to ignore future * regulatory domain changes caused by other drivers. * @signal_type: signal type reported in &struct cfg80211_bss. @@ -4463,10 +4510,11 @@ struct wiphy_iftype_akm_suites { * the same number of arbitrary MAC addresses. * @registered: protects ->resume and ->suspend sysfs callbacks against * unregister hardware - * @debugfsdir: debugfs directory used for this wiphy, will be renamed - * automatically on wiphy renames - * @dev: (virtual) struct device for this wiphy - * @registered: helps synchronize suspend/resume with wiphy unregister + * @debugfsdir: debugfs directory used for this wiphy (ieee80211/<wiphyname>). + * It will be renamed automatically on wiphy renames + * @dev: (virtual) struct device for this wiphy. The item in + * /sys/class/ieee80211/ points to this. You need use set_wiphy_dev() + * (see below). * @wext: wireless extension handlers * @priv: driver private data (sized according to wiphy_new() parameter) * @interface_modes: bitmask of interfaces types valid for this wiphy, @@ -4577,12 +4625,6 @@ struct wiphy_iftype_akm_suites { * and probe responses. This value should be set if the driver * wishes to limit the number of csa counters. Default (0) means * infinite. - * @max_adj_channel_rssi_comp: max offset of between the channel on which the - * frame was sent and the channel on which the frame was heard for which - * the reported rssi is still valid. If a driver is able to compensate the - * low rssi when a frame is heard on different channel, then it should set - * this variable to the maximal offset for which it can compensate. - * This value should be set in MHz. * @bss_select_support: bitmask indicating the BSS selection criteria supported * by the driver in the .connect() callback. The bit position maps to the * attribute indices defined in &enum nl80211_bss_select_attr. @@ -4602,11 +4644,19 @@ struct wiphy_iftype_akm_suites { * @support_mbssid must be set for this to have any effect. * * @pmsr_capa: peer measurement capabilities + * + * @tid_config_support: describes the per-TID config support that the + * device has + * @tid_config_support.vif: bitmap of attributes (configurations) + * supported by the driver for each vif + * @tid_config_support.peer: bitmap of attributes (configurations) + * supported by the driver for each peer + * @tid_config_support.max_retry: maximum supported retry count for + * long/short retry configuration */ struct wiphy { /* assign these fields before you register the wiphy */ - /* permanent MAC address(es) */ u8 perm_addr[ETH_ALEN]; u8 addr_mask[ETH_ALEN]; @@ -4673,11 +4723,6 @@ struct wiphy { u32 available_antennas_tx; u32 available_antennas_rx; - /* - * Bitmap of supported protocols for probe response offloading - * see &enum nl80211_probe_resp_offload_support_attr. Only valid - * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set. - */ u32 probe_resp_offload; const u8 *extended_capabilities, *extended_capabilities_mask; @@ -4686,16 +4731,10 @@ struct wiphy { const struct wiphy_iftype_ext_capab *iftype_ext_capab; unsigned int num_iftype_ext_capab; - /* If multiple wiphys are registered and you're handed e.g. - * a regular netdev with assigned ieee80211_ptr, you won't - * know whether it points to a wiphy your driver has registered - * or not. Assign this to something global to your driver to - * help determine whether you own this wiphy or not. */ const void *privid; struct ieee80211_supported_band *bands[NUM_NL80211_BANDS]; - /* Lets us get back the wiphy on the callback */ void (*reg_notifier)(struct wiphy *wiphy, struct regulatory_request *request); @@ -4703,14 +4742,10 @@ struct wiphy { const struct ieee80211_regdomain __rcu *regd; - /* the item in /sys/class/ieee80211/ points to this, - * you need use set_wiphy_dev() (see below) */ struct device dev; - /* protects ->resume, ->suspend sysfs callbacks against unregister hw */ bool registered; - /* dir in debugfs: ieee80211/<wiphyname> */ struct dentry *debugfsdir; const struct ieee80211_ht_cap *ht_capa_mod_mask; @@ -4718,7 +4753,6 @@ struct wiphy { struct list_head wdev_list; - /* the network namespace this phy lives in currently */ possible_net_t _net; #ifdef CONFIG_CFG80211_WEXT @@ -4734,7 +4768,6 @@ struct wiphy { u16 max_ap_assoc_sta; u8 max_num_csa_counters; - u8 max_adj_channel_rssi_comp; u32 bss_select_support; @@ -4751,6 +4784,13 @@ struct wiphy { const struct cfg80211_pmsr_capabilities *pmsr_capa; + struct { + u64 peer, vif; + u8 max_retry; + } tid_config_support; + + u8 max_data_retry_count; + char priv[0] __aligned(NETDEV_ALIGN); }; @@ -5526,9 +5566,9 @@ void cfg80211_send_layer2_update(struct net_device *dev, const u8 *addr); * @wiphy: the wireless device giving the hint (used only for reporting * conflicts) * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain - * should be in. If @rd is set this should be NULL. Note that if you - * set this to NULL you should still set rd->alpha2 to some accepted - * alpha2. + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. * * Wireless drivers can use this function to hint to the wireless core * what it believes should be the current regulatory domain by diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ce80773..5ef34a2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3776,6 +3776,9 @@ enum ieee80211_reconfig_type { * * @start_pmsr: start peer measurement (e.g. FTM) (this call can sleep) * @abort_pmsr: abort peer measurement (this call can sleep) + * @set_tid_config: Apply TID specific configurations. This callback may sleep. + * @reset_tid_config: Reset TID specific configuration for the peer. + * This callback may sleep. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -4080,6 +4083,13 @@ struct ieee80211_ops { struct cfg80211_pmsr_request *request); void (*abort_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_pmsr_request *request); + int (*set_tid_config)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct cfg80211_tid_config *tid_conf); + int (*reset_tid_config)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u8 tids); }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 158bccb..b002ef2 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -265,6 +265,29 @@ */ /** + * DOC: TID configuration + * + * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG + * attribute given in wiphy capabilities. + * + * The necessary configuration parameters are mentioned in + * &enum nl80211_tid_config_attr and it will be passed to the + * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. + * + * If the configuration needs to be applied for specific peer then the MAC + * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the + * configuration will be applied for all the connected peers in the vif except + * any peers that have peer specific configuration for the TID by default; if + * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values + * will be overwritten. + * + * All this configuration is valid only for STA's current connection + * i.e. the configuration will be reset to default when the STA connects back + * after disconnection/roaming, and this configuration will be cleared when + * the interface goes down. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -1039,14 +1062,11 @@ * a control port frame and as a notification that a control port frame * has been received. %NL80211_ATTR_FRAME is used to specify the * frame contents. The frame is the raw EAPoL data, without ethernet or - * 802.11 headers. An optional %NL80211_ATTR_SRC_MAC can be used to send - * pre-auth frames to STAs on behalf of other APs. + * 802.11 headers. * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added * indicating the protocol type of the received frame; whether the frame * was received unencrypted and the MAC address of the peer respectively. - * %NL80211_ATTR_DST_MAC can be used to forward pre-auth frames in - * userspace while using AP mode. * * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. * @@ -1128,6 +1148,9 @@ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame * content. The frame is ethernet data. * + * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration + * is passed using %NL80211_ATTR_TID_CONFIG attribute. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1352,6 +1375,8 @@ enum nl80211_commands { NL80211_CMD_PROBE_MESH_LINK, + NL80211_CMD_SET_TID_CONFIG, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2412,8 +2437,10 @@ enum nl80211_commands { * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not * advertised for a specific interface type. * - * @NL80211_ATTR_SRC_MAC: MAC address used in control port over nl80211 transmit - * @NL80211_ATTR_DST_MAC: MAC address used in control port over nl80211 receive + * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a + * nested attribute with &enum nl80211_tid_config_attr sub-attributes; + * on output (in wiphy attributes) it contains only the feature sub- + * attributes. * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2883,8 +2910,7 @@ enum nl80211_attrs { NL80211_ATTR_IFTYPE_AKM_SUITES, - NL80211_ATTR_SRC_MAC, - NL80211_ATTR_DST_MAC, + NL80211_ATTR_TID_CONFIG, /* add attributes here, update the policy in nl80211.c */ @@ -4559,6 +4585,7 @@ enum nl80211_key_default_types { * See &enum nl80211_key_default_types. * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. * Defaults to @NL80211_KEY_RX_TX. + * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute @@ -4574,6 +4601,7 @@ enum nl80211_key_attributes { NL80211_KEY_TYPE, NL80211_KEY_DEFAULT_TYPES, NL80211_KEY_MODE, + NL80211_KEY_DEFAULT_BEACON, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -4730,6 +4758,69 @@ enum nl80211_tx_power_setting { }; /** + * enum nl80211_tid_config - TID config state + * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID + * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID + */ +enum nl80211_tid_config { + NL80211_TID_CONFIG_ENABLE, + NL80211_TID_CONFIG_DISABLE, +}; + +/* enum nl80211_tid_config_attr - TID specific configuration. + * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values + * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported + * for per-vif configuration; doesn't list the ones that are generic + * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). + * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but + * per peer instead. + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer + * is selected, if set indicates that the new configuration overrides + * all previous peer configurations, otherwise previous peer specific + * configurations should be left untouched. If peer is selected then + * it will reset particular TID configuration of that peer and it will + * not accept other TID config attributes along with peer. + * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) + * Its type is u16. + * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. + * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. + * Its type is u8. + * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs + * specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using + * the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs + * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using + * the values from &nl80211_tid_config. + */ +enum nl80211_tid_config_attr { + __NL80211_TID_CONFIG_ATTR_INVALID, + NL80211_TID_CONFIG_ATTR_PAD, + NL80211_TID_CONFIG_ATTR_VIF_SUPP, + NL80211_TID_CONFIG_ATTR_PEER_SUPP, + NL80211_TID_CONFIG_ATTR_OVERRIDE, + NL80211_TID_CONFIG_ATTR_TIDS, + NL80211_TID_CONFIG_ATTR_NOACK, + NL80211_TID_CONFIG_ATTR_RETRY_SHORT, + NL80211_TID_CONFIG_ATTR_RETRY_LONG, + NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, + NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, + + /* keep last */ + __NL80211_TID_CONFIG_ATTR_AFTER_LAST, + NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_packet_pattern_attr - packet pattern attribute * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has @@ -5548,9 +5639,8 @@ enum nl80211_feature_flags { * feature, which prevents bufferbloat by using the expected transmission * time to limit the amount of data buffered in the hardware. * - * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS: The driver - * can use src and dst MAC addresses with control port over nl80211 rx - * and tx operations. + * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection + * and can receive key configuration for BIGTK using key indexes 6 and 7. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -5599,7 +5689,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SAE_OFFLOAD, NL80211_EXT_FEATURE_VLAN_OFFLOAD, NL80211_EXT_FEATURE_AQL, - NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS, + NL80211_EXT_FEATURE_BEACON_PROTECTION, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, |